Answer: Option (D) is the correct answer.
Explanation:
It is known that metals are the substances which hold excess number of electrons and hence they need to lose electrons in order to gain stability.
For example, potassium is a metal with atomic number 19 and its electronic configuration is 2, 8, 8, 1.
So, it needs to gain stability and hence, it easily loses its one valence electron to acquire a positive charge as [tex]K^{+}[/tex].
Thus, we can conclude that in general, metals react by losing valence electrons.
In a laboratory experiment, John uses a mesh to separate soil particles from water. Which technique of separation is he using? chromatography distillation filtration fragmentation condensation
Answer: Option (c) is the correct answer.
Explanation:
A mesh is a kind of net like structure generally used for the purpose of filtration.
Distillation is defined as the method used to separate two liquids with a difference of less than or around [tex]25^{o}C[/tex] in their boiling point.
So, a liquid with low boiling point will evaporate and its vapors can be collected in a separate container.
Chromatography is defined as a method for separating a mixture by passing it in a solution with the help of a medium where the components of the mixture travel at different rates.
And, filtration is a method used to separate a solid from a liquid by passing through a porous barrier. The solid remain stick to the barrier and liquid passes through the barrier.
A method in which a solid substance is broken down into different parts or fragments is known as fragmentation.
Condensation is a process is in which vapor phase of a substance changes into liquid phase.
Thus, we can conclude that in the given situation John is using the technique of filtration.
The ionization constant for water (kw) is 9.614*10-14 at 60°c. calculate [h3o+], [oh−], ph, and poh for pure water at 60°c.
Determine if the bond between each pairs of atoms would be pure covalent, polar covalent, or ionic. n and se
Types of Bonds can be predicted by calculating the difference in electronegativity.
If, Electronegativity difference is,
Less than 0.4 then it is Non Polar Covalent Bond
Between 0.4 and 1.7 then it is Polar Covalent Bond
Greater than 1.7 then it is Ionic
For N and Se,
E.N of Nitrogen = 3.04
E.N of Selenium = 2.55
________
E.N Difference 0.49 (Weakly Polar Covalent)
As you have not provided remaining pairs, so if you have any of them, follow the method as mentioned above.
Pure covalent bond is formed between Br and Br. Polar covalent bonds are formed by O and F, N and Cl, and others. A connection between Sr and O is ionic.
We can take into account the difference in electronegativity between the elements involved to determine the sort of bond—pure covalent, polar covalent, or ionic—between each pair of atoms:
The terms "Br and Br" (bromine and bromine)
Since both atoms are composed of the same element, their electronegativity is the same.
The difference in electronegativity is 0.
Because the identical atoms share the electrons evenly, a pure covalent link is produced.
Oxygen and fluorine, or O and F:
The electronegativity of oxygen (O) is roughly 3.44.
With a value of roughly 3.98, fluorine (F) has a higher electronegativity.
O and F have different electronegativities by 0.54.
This slight difference in electronegativity points to a polar covalent connection, where the electrons are distributed unevenly, leaving the less electronegative atom (O) with a partial positive charge and the more electronegative atom (F) with a partial negative charge.
Nitrogen and chlorine, or N and Cl
The electronegativity of nitrogen (N) is around 3.04.
The electronegativity of chlorine (Cl) is roughly 3.16.
N and Cl have different electronegativities of 0.12 each.
This slight variation in electronegativity suggests a polar covalent connection, similar to that between O and F.
Oxygen and strontium are two elements.
About 0.95 is the electronegativity of strontium (Sr).
With a value of about 3.44, oxygen (O) has a much higher electronegativity.
Between Sr and O, there is a significant difference in electronegativity (3.44 - 0.95 = 2.49).
The creation of Sr²⁺ ions and O₂ ions, which are bound together by electrostatic forces, results from the electrons being transferred from Sr to O in an ionic bond, as indicated by the high electronegativity difference.
To sum up:
Pure covalent bond is formed between Br and Br.
Polar covalent bonds are formed by O and F, N and Cl, and others.
A connection between Sr and O is ionic.
To know more about electrons:
https://brainly.com/question/2845051
#SPJ3
The reaction of cr2+(aq) with cr2o2−7(aq) in acid solution to form cr3+(aq). calculate δg∘rxn.
Answer:
The correct answer is -1059.45 kJ.
Explanation:
The balanced equation is:
6Cr₂⁺ + Cr₂O₇²⁻ + 14H⁺ ⇒ 8Cr₃⁺ + 7H₂O
In the mentioned reaction 6 electrons are transferred
By calculating Ecell with the use of reduction potential of each cell:
Ecell = Eox + Ered
Ered = 0.50V
Eox = -Ered = -(-0.50V) = 0.50V
Ered = 1.33V
Ecell = 0.50V + 1.33V
Ecell = 1.83V
Now in order to calculate ΔG
n = 6, Faraday constant (f) = 9.68470 × 10⁴ = 96847 C mol⁻¹
ΔG = -nFE
ΔG = -6 × 96487 C mol-1 × 1.83V
ΔG = -1059.42 KJ
The relation between ΔG and ΔG°rxn
ΔG = ΔG° + RTlnQ
Under the standard condition Q = 1 and ΔG = ΔG°
Thus,
ΔG°rxn = ΔG = -1059.42 KJ
For ethanol, propanol, and n-butanol the boiling points, surface tensions, and viscosities all increase. what is the reason for this increase?
The increase in boiling points, surface tensions, and viscosities for ethanol, propanol, and n-butanol is due to stronger hydrogen bonding and van der Waals dispersion forces as these molecules get larger and contain more electrons.
Explanation:The boiling points, surface tensions, and viscosities of ethanol, propanol, and n-butanol increase due to the presence of hydrogen bonding and van der Waals dispersion forces. As the molecules get larger and have more electrons, the van der Waals forces increase. This causes the boiling points to rise because more energy is needed to overcome these intermolecular forces. The surface tension and viscosity also increase as the molecular size and intermolecular forces increase.
Moreover, the boiling point of an alcohol is significantly higher compared to the analogous alkane due to the presence of hydrogen bonding in addition to van der Waals forces and dipole-dipole interactions. Alcohols also exhibit a pattern where the boiling points increase with the number of carbon atoms, reflecting the increase in intermolecular attractions as the molecule size increases.
What is the geometry around the bottom carbon atom in acetonitrile? what is the geometry around the bottom carbon atom in acetonitrile? tetrahedral trigonal planar linear?
Final answer:
The bottom carbon atom in acetonitrile has a linear geometry due to the sp hybridization created by two regions of electron density, corresponding to a triple bond with nitrogen and a single bond with another carbon.
Explanation:
The geometry around the bottom carbon atom in acetonitrile is linear. Acetonitrile, which has the formula CH3CN, features a triple bond between the bottom carbon (the carbon atom bonded to the nitrogen) and the nitrogen atom. This carbon is attached to two groups: a nitrogen atom and another carbon (part of the methyl group). The triple bond counts as a single region of electron density due to the presence of multiple bonds to the same atom. Therefore, it only has two regions of electron density, leading to sp hybridization and a linear molecular geometry with the C-C-C and C-C-N bond angles both being approximately 180°.
In this lab, you will use the flame test to identify the metal ion in two boxes of unidentified fireworks. Write an investigative question that you can answer by doing this experiment.
The first one is chlorine ion, the second one is metal ion.
Which term best describes an electrical circuit?
Select one:
a. steady flow
b. quick burst
c. short-lived phenomenom
d. dangerous explosion
An electrical circuit is best described as a 'steady flow.' Electricity in a circuit flows continuously from the power source, through the device being powered, and back to the source.
Explanation:The term that best describes an electrical circuit is steady flow. In a basic electrical circuit, electricity moves from a power source like a battery through conductive materials such as wires to the device that it's powering (like a light bulb), and then it returns to the source. This movement is a continuous or steady flow of electric charge, and it usually happens until the power source is depleted or the circuit is otherwise disrupted.
Learn more about Electrical Circuit here:
https://brainly.com/question/29761561
#SPJ11
The increase in the population of people living in urban areas will cause a decrease in urban sprawl.
Please select the best answer from the choices provided
T
F
Answer: The given statement is false.
Explanation:
When there occurs unrestricted growth and development in number of urban areas for housing, commercial development, roads etc then it is known as urban sprawl.
Hence, when there will be more population in an urban area then there will be more urban sprawl because then there will be more demand for facilities.
Thus, we can conclude that the statement increase in the population of people living in urban areas will cause a decrease in urban sprawl, is false.
A sound is first produced by making something BLANK . The sound then travels through a BLANK to reach the ears, which are the parts of the body that allow for sounds to be heard.
A sound is first produced by making something vibrates and then the sound travels through a medium and reach our ears.
Which are the parts of the body that allow for sounds to be heard?The ear is responsible for hearing sounds as well as for balance in the human body. The ear has three parts i.e. the outer, middle and inner ears. We hear the sound when the body starts vibration.
So we can conclude that a sound is first produced by making something vibrates and then the sound travels through a medium and reach our ears.
Learn more about sound here: https://brainly.com/question/1199084
Which choice best describes the polarity of bri5? view available hint(s) which choice best describes the polarity of ? the molecule is polar and has polar bonds. the molecule is nonpolar and has polar bonds. the molecule is polar and has nonpolar bonds. the molecule is nonpolar and has nonpolar bonds?
While BrI5 is not a common molecule and potentially not real, based on similar molecular structures, it would most likely be a polar molecule with polar bonds due to its presumed asymmetry and the difference in electronegativity between bromine and iodine.
Explanation:The molecule in question, BrI5 (bromine pentaiodide), does not appear to exist or is not common in chemical literature. However, assuming it follows similar principles of molecular polarity, we can deduce its polarity based on the provided information. A molecule is polar if it has polar bonds and is not symmetric, meaning that the polarities do not cancel out. Conversely, a molecule is nonpolar if it has polar bonds but is symmetric, such that the polarization cancels out, or if there are no polar bonds present.
Since BrI5 is hypothetically a molecule consisting of a central atom of bromine with five iodine atoms surrounding it, its structure would likely be asymmetric due to the odd number of atoms, leading to an uneven distribution of charge. Thus, if BrI5 did exist, it would most likely have polar bonds (as bromine and iodine have different electronegativities) and would not be symmetric; hence, it would be a polar molecule with polar bonds.
Learn more about Molecular Polarity here:https://brainly.com/question/30640129
#SPJ6
The bond energy for the van der waals bond between two helium atoms is 7.9×10−4ev. assuming that the average kinetic energy of a helium atom is (3/2)kbt, at what temperature is the average kinetic energy equal to the bond energy between two helium atoms? use kb=8.62×10−5ev/k.
What is the molarity of 555 l of a ba(oh)2 solution if the ph is 10.20? 1. 2.26 × 10−5 m 2. 6.31 × 10−11 m 3. 5.15 × 10−7 m 4. 3.15 × 10−11 m 5. 3.14 × 10−4 m 6. 1.58 × 10−4 m 7. 7.92 × 10−5 m 8. 4.40 × 10−2 m?
Answer:
7. 7.92 × 10−5
Explanation:
Hello,
In this case, with the given pH, one could find the pOH:
[tex]pOH=14-pH=14-10.20=3.8[/tex]
Thus, since barium hydroxide is completely dissolved in water based on:
[tex]Ba(OH)_2\rightarrow Ba^{+2}+2OH^-[/tex]
The concentration of hydroxyl ions is twice to that of the hydroxide (2:1 mole relationship). Therefore, by considering the relationship between the pOH and the concentration of hydroxyl we have:
[tex]pOH=-log([OH]^-)\\[/tex]
[tex][OH]^-=10^{-3.8}=1.58x10^{-4}M[/tex]
Finally, given the 1:2 mole ratio of barium hydroxide to hydroxyl ions, the concentration of barium hydroxide results:
[tex][Ba(OH)_2]=2*[OH^-]=\frac{1}{2} *1.58x10^{-4}M[/tex]
[tex][Ba(OH)_2]=7.92x10^{-5}M[/tex]
Thus, the answer is 7. 7.92 × 10−5.
Regards.
Draw the lewis structure for the molecule ch2chch3. how many sigma and pi bonds does it 30) contain
Lewis structure are the diagrams, which represent the bonding between atoms of a molecule. It also shows the number of lone pairs present in the atom. The propene Lewis structure shows that it has 8 sigma and 1 pi bonds.
Propene or CH[tex]_2[/tex]CHCH[tex]_3[/tex], is an organic compound that is released by the burning of forest fires, motor vehicles, and aircraft exhaust. The Lewis structure of propene shows that it has 8 sigma bonds and one pi bond.
Sigma bonds are represented as single bond. Pi bonds are represented as double or triple bond.The given image below is the Lewis structure of propene.
Carbon is a tetravalent atom, and in its its excited stated can form 4 covalent bonds. In the diagram, it is seen that carbon is [tex]\text{sp}^2[/tex] hybridized. Carbon forms head to head overlapping with the three hydrogen atoms, forming three sigma bonds.
Since, the carbon is a tetravalent atom, it will form one sigma and one pi bond. The pi bonds are formed when orbitals overlap perpendicularly along the plane of sigma bond.
To know more about Lewis structure, refer to the following link:
https://brainly.com/question/11730596?referrer=searchResults
what is the volume of 12.0 g of cl2 gas at stp
Answer:
[tex]V=3.79L[/tex]
Explanation:
Hello,
In this case, we are talking about an ideal gas problem in which 12.0 g of chlorine gas is at standard both pressure (1atm) and temperature (0°C), therefore, to compute the corresponding volume, one applies the ideal gas law, then converts from grams to moles considering the diatomic chlorine and subsequently solves for volume as shown below:
[tex]PV=nRT\\V=\frac{nRT}{P}=\frac{12.0gCl_2*\frac{1molCl_2}{70.9gCl_2} *0.082 \frac{atm*L}{mol*K} * 273.15K}{1atm} \\V=3.79L[/tex]
Best regards.
The solubility product constant of pbcl2 is 1.7 × 10−5 . what is the maximum concentration of pb2+ that can be in ocean water that contains 0.0500 m nacl?
A stock solution of naoh is 0.800 m. what volume of this solution (in ml) is needed to prepare 2.00 l of 0.342 m naoh?
Given that delta hvap is 58.2 kj/mol and the boiling point is 83.4 c 1atm if one mole of this substance is vaporized at 1atm calculate delta ssurr
What is the value of q when the solution contains 2.50×10−3 m mg2+ and 2.00×10−3m co32−? express your answer numerically?
The value of [tex]\( Q \)[/tex] for the given solution is [tex]\( 5.00 \times 10^{-6} \).[/tex]
To determine the reaction quotient [tex]\( Q \)[/tex] for the dissolution reaction of magnesium carbonate, [tex]\( \text{MgCO}_3 \)[/tex], we need to understand the solubility product constant ([tex]\( K_{\text{sp}} \)[/tex]) and the concentrations of the ions involved.
Given:
Concentration of [tex]\( \text{Mg}^{2+} \)[/tex]: [tex]\( 2.50 \times 10^{-3} \) M[/tex]
Concentration of [tex]\( \text{CO}_3^{2-} \)[/tex]: [tex]\( 2.00 \times 10^{-3} \) M[/tex]
Reaction:
For the dissolution of [tex]\( \text{MgCO}_3 \)[/tex]:
[tex]\[ \text{MgCO}_3(s) \leftrightarrow \text{Mg}^{2+}(aq) + \text{CO}_3^{2-}(aq) \][/tex]
Expression for the Reaction Quotient ([tex]\( Q \)[/tex]):
[tex]\[ Q = [\text{Mg}^{2+}][\text{CO}_3^{2-}] \][/tex]
Substitute the given concentrations into the expression:
[tex]\[ Q = (2.50 \times 10^{-3} \, \text{M})(2.00 \times 10^{-3} \, \text{M}) \][/tex]
Calculation:
[tex]\[ Q = (2.50 \times 10^{-3}) \times (2.00 \times 10^{-3}) \][/tex]
[tex]\[ Q = 5.00 \times 10^{-6} \][/tex]
A reaction vessel contains nh3, n2, and h2 at equilibrium at a certain temperature. the equilibrium concentrations are [n2] = 0.31 m, [h2] = 1.51 m, and [nh3] = 0.75 m. calculate the equilibrium constant, kc, if the reaction is represented as
To calculate the equilibrium constant (Kc), we use the law of mass action. The equation for the reaction is N2 + 3H2 ⇌ 2NH3. By plugging in the given equilibrium concentrations into the equation and solving, we find that Kc is approximately 0.05927.
Explanation:To calculate the equilibrium constant, Kc, we need to use the law of mass action. The equation for the reaction is:
N2 + 3H2 ⇌ 2NH3
Kc is calculated by taking the concentrations of the products (NH3) raised to their stoichiometric coefficients and dividing by the concentrations of the reactants (N2 and H2) raised to their stoichiometric coefficients.
Kc = ([NH3]²) / ([N2][H2]³)
Plugging in the given equilibrium concentrations ([NH3] = 0.75 M, [N2] = 0.31 M, [H2] = 1.51 M) into the equation, we get:
Kc = (0.75²) / (0.31 × 1.51³)
Kc = 1.125 / (0.468 × 3.448)³
Kc = 1.125 / (0.468 × 40.7855)
Kc = 1.125 / 18.986
Kc ≈ 0.05927
Learn more about Calculating Equilibrium Constant here:https://brainly.com/question/30310248
#SPJ11
if you have 100 grams of S8, how many moles of S8 is that
In the book, Rumble Fish by S.E. Hinton, where dies it take place
Final answer:
The book Rumble Fish by S.E. Hinton takes place in Tulsa, Oklahoma.
Explanation:
In the book Rumble Fish by S.E. Hinton, the story takes place in a fictional city called Tulsa, Oklahoma. The setting is important because it represents the harsh realities of urban life and the struggles faced by the characters in the book.
Mercury is a pollutant classified as
Sucrose is very soluble in water. at 25◦c, 211.4 grams of sucrose will dissolve in 100 g of water. given that the density of the saturated sucrose solution is 1.34 g/ml, what is the molarity of the solution
The molarity of the sucrose solution is calculated by finding the number of moles of sucrose and the volume of the solution in liters. By using the provided data, we came up with a molarity of 2.67 M.
Explanation:To calculate the molarity of the solution, we need to know the number of moles of sucrose and the volume of the solution in liters. Given that the molecular weight of sucrose (C12H22O11) is approximately 342 g/mol, the number of moles of sucrose in 211.4 g can be calculated as (211.4 g) / (342 g/mol) = 0.618 moles.
To get the volume of the solution, first calculate the total mass of the solution which is mass of water + mass of sucrose = 100 g + 211.4 g = 311.4 g. Since the density of the solution is provided as 1.34 g/ml, convert this to kg/L to get the volume. So, 311.4 g / 1.34 g/ml = 232.39 ml or 0.232 L.
Finally, we calculate the molarity which is moles/volume in liters. So, molarity = 0.618 moles / 0.232 L = 2.67 M.
Learn more about Molarity here:https://brainly.com/question/8732513
#SPJ3
Answer:
2.66 M
from ut quest
Carl crumbled a piece of paper before throwing it in the trash can. Which is true about the paper after it has been crumbled
Final answer:
Crumpling a piece of paper doesn't change its mass but alters its shape, leading to reduced air resistance.
Explanation:
When Carl crumbled a piece of paper before throwing it in the trash can, the physical shape of the paper changed, but not its mass. This action relates to a physics concept concerning gravity and air resistance.
An important observation is that when different objects are dropped from the same height, like a crumpled piece of paper and a textbook, they will hit the ground at approximately the same time if we ignore air resistance.
This is because all objects in a vacuum fall at the same rate regardless of mass, due to the uniform acceleration caused by gravity. In real-life conditions, air resistance affects how objects fall.
Crumpling the paper reduces its surface area, thereby reducing air resistance and allowing it to fall faster compared to an uncrumpled sheet of paper.
If you crumple one piece of paper into a small ball and then crumple two pieces of paper, making a bigger ball but with double the mass, they will still hit the ground at the same time if dropped from the same height because the acceleration due to gravity is constant.
Why are Noble gases inert?
A. They cannot form bonds because they have 0 electrons in their valence shell.
B. They are actually so reactive that they bond instantly with any substance they touch. This means they cannot be found in their pure form in nature.
C. They have a full shell of valence electrons.
D. They bond only with atoms of their own element.
Given the starting solution had a concentration of 1.25 m, how many moles of co[h2o]6cl2 were available in the amount of starting solution you used
To calculate the number of moles of co[h2o]6cl2 in the starting solution, we can use the molarity (concentration) of the solution and the volume of the solution used. If 1L of the solution is used, the number of moles would be equal to the molarity of the solution.
Explanation:The question is about finding out the number of moles of co[h2o]6cl2 present in a starting solution with a given molarity (concentration). Molarity, in a nutshell, is defined as the number of moles of solute per liter of solution. Given that the molarity of the solution is 1.25M, we can directly relate this to the number of moles using the definition of molarity. For example, if we used 1L of the solution, the number of moles would be 1.25moles. If less or more than 1L of solution was used, the number of moles would be less or more, respectively, which is directly proportional to the volume of the solution used.
Learn more about Molarity here:https://brainly.com/question/8732513
#SPJ3
Find the age t of a sample, if the total mass of carbon in the sample is mc, the activity of the sample is a, the current ratio of the mass of 14 6c to the total mass of carbon in the atmosphere is r, and the decay constant of 14 6c is λ. assume that, at any time, 14 6c is a negligible fraction of the total mass of carbon and that the measured activity of the sample is purely due to 14 6c. also assume that the ratio of mass of 14 6c to total carbon mass in the atmosphere (the source of the carbon in the sample) is the same at present and on the day when the number of 14 6c atoms in the sample was set. express your answer in terms of the mass ma of a 14 6c atom, mc, a, r, and λ.
the age of the sample (t) can be expressed as:** t = (1 / λ) * ln(a / r)
**1. Relate Activity and Initial Abundance:**
The activity (a) of the sample is proportional to the current number of ¹⁴⁶C atoms in the sample (N) relative to the initial number of ¹⁴⁶C atoms (N₀) at the time the sample was isolated from the atmosphere:
a ∝ N / N₀
**2. Relate Number of Atoms to Mass:**
The number of ¹⁴⁶C atoms (N) is related to the total mass of carbon (mc) and the mass of a single ¹⁴⁶C atom (ma) through Avogadro's constant (Na):
N = (mc / ma) * Na
**3. Consider Decay and Substitute:**
Over time, ¹⁴⁶C atoms decay with a decay constant (λ). We can express the change in the number of ¹⁴⁶C atoms using the radioactive decay equation:
dN/dt = -λN
Since we're looking for the age (t), we can integrate this equation to find the relationship between N and t:
N(t) = N₀ * e^(-λt) // (Equation 1)
Substitute N₀ with the initial number of ¹⁴⁶C atoms proportional to the initial ¹⁴⁶C/¹²C ratio in the atmosphere (r * mc / ma * Na):
N(t) = (r * mc / ma * Na) * e^(-λt) // (Equation 2)
**4. Relate Activity and Current ¹⁴⁶C/¹²C Ratio:**
The current activity (a) is also proportional to the current ¹⁴⁶C/¹²C ratio in the sample:
a ∝ (mc / ma * Na) * [N(t) / mc]
Substitute N(t) from Equation 2:
a ∝ (mc / ma * Na) * [ (r * mc / ma * Na) * e^(-λt) ] / mc
**5. Solve for Age (t):**
Cancel common factors and simplify:
a ∝ r * e^(-λt)
Taking the natural logarithm of both sides:
ln(a/r) = -λt
The final expression for the age of the sample [tex]t[/tex] in terms of the given variables is [tex]t = -\frac{1}{\lambda} \ln \left( \frac{a}{\lambda \cdot \frac{m_c \cdot r}{m_a}} \right)[/tex]
Step 1: Understanding Activity
The activity [tex]A[/tex] of a radioactive sample is related to the number of radioactive nuclei present [tex]N[/tex] by the equation:
[tex]A = \lambda N[/tex]
Here, [tex]\lambda[/tex] is the decay constant and represents the probability of decay per unit time.
Step 2: Relating Activity to Carbon-14
Given that the measured activity [tex]a[/tex] of the sample is purely due to [tex]^{14}C[/tex] and can be expressed as:
[tex]a = \lambda N_t[/tex]
Where [tex]N_t[/tex] is the current number of [tex]^{14}C[/tex] atoms in the sample.
Step 3: Finding Original Amount of Carbon-14
If we denote the original number of [tex]^{14}C[/tex] atoms in the sample as [tex]N_0[/tex], this can be related to the total mass of carbon in the sample and the ratio [tex]r[/tex] as follows:
[tex]N_0 = \frac{m_c \cdot r}{m_a}[/tex]
Where [tex]m_a[/tex] is the mass of a single [tex]^{14}C[/tex] atom.
Step 4: Calculating Age
The relationship between current [tex]N_t[/tex], original [tex]N_0[/tex], and time [tex]t[/tex] can be expressed using the formula for exponential decay:
[tex]N_t = N_0 e^{-\lambda t}[/tex]
Thus, rearranging this expression, we find:
[tex]t = -\frac{1}{\lambda} \ln \left( \frac{N_t}{N_0} \right)[/tex]
Step 5: Substituting Values
Substituting in our earlier expressions:
[tex]t = -\frac{1}{\lambda} \ln \left( \frac{N_t}{\frac{m_c \cdot r}{m_a}} \right)[/tex]
This simplifies further to:
[tex]t = -\frac{1}{\lambda} \left( \ln(N_t) - \ln\left(\frac{m_c \cdot r}{m_a}\right) \right)[/tex]
Thus, we can express [tex]t[/tex] as:
[tex]t = -\frac{1}{\lambda} \ln(N_t) + \frac{1}{\lambda} \ln\left(\frac{m_c \cdot r}{m_a}\right)[/tex]
[tex]t = -\frac{1}{\lambda} \ln \left( \frac{a}{\lambda \cdot \frac{m_c \cdot r}{m_a}} \right)[/tex]
The concentration of the solid phase _____ the quantity present.
depends on
changes with the amount of
is equal to
always remains the same regardless of
Answer: Option (b) is the correct answer.
Explanation:
A solution that contains more number of solute particles than the solvent particles is known as a concentrated solution.
For example, concentrated solution of sulfuric acid.
On the other hand, a solution that contains less number of solute particles than the solvent particles is known as a dilute solution.
For example, a dilute solution of HCl.
Hence, we can conclude that concentration of a substance changes with change in the amount of solute.
Therefore, the concentration of the solid phase changes with the amount of the quantity present.
A chemistry student mixes 5 grams of sodium chloride (NaCl) in 100 ml of water and stirs until all of the salt is dissolved. Once dissolved, the student measures the electrical conductivity of the solution. An additional 5 grams of NaCl is then dissolved in the solution. Which statement MOST accurately describes how the additional five grams of salt will affect the electrical conductivity of the solution?
When additional 5 grams of NaCl are dissolved in solution the conductivity of solution increases as more ions are available for conduction.
What are ions?An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.
Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with the oppositely charged ions resulting in neutral molecules.
Learn more about ions,here:
https://brainly.com/question/1488567
#SPJ2