In which situation is the gravitational force between two objects hard to detect?
A. if the mass of one of the objects is very great
B. if the mass of both objects is very great
C. if the objects are very close together
D. if the mass of each object is very small
Reset
Submit

The steps of the inquiry process in historical inquiry are: developing questions, analyzing sources, developing evidence, and constructing claims.

The steps of the inquiry process in historical inquiry are as follows:

These steps allow historians to engage in the process of historical inquiry and gain a comprehensive understanding of the past.

Answer:

Time period = 2*0.79 s =     1.58 s

Frequency = 1/TimePeriod = 0.63 Hz

Explanation:

Time period of the pendulum is the time taken to come back to the exact same position. so if you start from top left, the time period is the time taken when the pendulum comes back up to top left.

Answer:

1. [tex]Q = 5.56 * 10^{-3} C[/tex]

2.[tex]Q = 2.97 * 10^{-12} C[/tex]

Explanation:

1. Electrostatic force is given as:

[tex]F = \frac{kqQ}{r^2}[/tex]

where k = Coulombs constant

q = charge of first charge

Q = charge of the second charge

r = distance between them

From the question:

F = 100 N

q  = [tex]2 * 10^{-10} C[/tex]

r = 0.01 m

We need to find Q.

From the formula of force, we have that Q is:

[tex]Q = \frac{Fr^2}{kq}[/tex]

[tex]Q = \frac{100 * 0.01^2}{8.99 * 10^9 *2 * 10^{-10}} \\\\\\Q = \frac{0.01}{1.798}\\ \\\\Q = 0.00556 C = 5.56 * 10^{-3} C[/tex]

This is the charge, Q, of the second charge.

2. From the question:

F = 2 N

q  = [tex]3 * 10^{-6} C[/tex]

r = [tex]2 *10^{-4} m[/tex]

We need to find Q.

Using the same formula for Q as in 1. above, we have that:

[tex]Q = \frac{2 * (2 *10^{-4})^2}{8.99 * 10^9 *3 * 10^{-6}} \\\\\\Q = \frac{8 * 10^{-8}}{26970}\\ \\\\Q = 2.97 * 10^{-12} C[/tex]

This is the charge, Q, of the second charge.

Answer:

(1)  [tex]4.4835*10^{17}C[/tex]

(2) [tex]2.9748*10^{-12}C[/tex]

Explanation:

Force Between two charges is give by.

[tex]F=k\frac{Q_1 *Q_2}{r^2}[/tex] , here k is called coulomb constant and has value = [tex]8.967*10^9Nm^2/C[/tex].

(1) case, F =100N, r = 0.1m and [tex]Q_1[/tex]=[tex]2*10^{-10}C[/tex] substituting these values in above equation and solving for unknown gives us.

[tex]Q_2 = 4.4835*10^{17}C[/tex].

(2) Case, F = 2N, r = [tex]2*10^{-4}m[/tex] and [tex]Q_1=3*10^{-6}C[/tex].

again by substituting these in above equation and solving for unknown gives us.

[tex]Q_2=2.9748*10^{-12}C.[/tex]

Answer:

the formation of bubbles

a change in color

the formation of a precipitate

Explanation:

Answer:

>the formation of bubbles

>a change in color

> the formation of a precipitate

Answer:

Fuel for nuclear power plants is a radiation hazard to miners and other nuclear power workers. Nuclear waste requires long-term storage. Mining nuclear fuels can damage the environment. Human error at plants can lead to meltdowns, which endanger the environment and human health. Natural disasters can lead to radiation leaks. Though currently abundant, nuclear fuels are nonrenewable resources.

Explanation:

this is the sample answer :)

Three Risks or disadvantages of nuclear power

Nuclear power is a form of power derived from nuclear subtances and elements. it can also be called nuclear energy.

This type of power is quite expensive to maintain and most time the power is really high and unable to control.

In conclusion, nuclear power has high risk and disadvantages that must be consider, a few has bee described above

Learn more about Nuclear energy : https://brainly.com/question/11963586

#SPJ2

Answer:

1. He is putting force on the ball to throw it. 2. Him throwing the ball. 3. If he puts more force into throwing the ball it would give the ball more energy>>>

Explanation:

(1) The picture represents an example of kinetic energy because the ball is in motion.

(2) The factors affecting the energy of the ball are its mass and velocity.

(3) The change the could be made to give the ball more energy is to increase its mass or velocity.

Kinetic energy is the energy of motion. In the given picture, the ball is in motion, so it represents an example of kinetic energy.

The factors that affect the energy of the ball include its mass and velocity. A ball with a larger mass or a higher velocity will have more kinetic energy.

To give the ball more energy, you could increase its mass or increase its velocity, which will in turn increase the kinetic energy of the ball.

Learn more about Kinetic energy here:

https://brainly.com/question/26472013

#SPJ3

Answer: B i did a test

The voltage drop across the 20.0-ohm resistor is 30 V. Correct Option is 3.

When resistors are connected in series, the total resistance (R_total) is the sum of individual resistances. In this case, the total resistance is:

R_total = 60 ohm + 20 ohm = 80 ohm

According to Ohm's law, the voltage drop across a resistor is proportional to its resistance. Therefore, the voltage drop across the 20.0-ohm resistor can be calculated using the ratio of its resistance to the total resistance, multiplied by the total voltage.

Voltage drop across the 20.0-ohm resistor:

V_drop = (Resistance of the 20.0-ohm resistor / Total resistance) * Total voltage

V_drop = (20 ohm / 80 ohm) * 120 V

V_drop = (1/4) * 120 V

V_drop = 30 V

Try to know more about voltage :

https://brainly.com/question/32002804

#SPJ2

Answer:

Effective resistance:

Rp = r/5 = 0.1/5 =0.02Ω

Explanation:

When the resistances are connected in parallel, the effective resistance becomes less than the smallest individual resistance. Thus smallest resistance is obtained when five0.1Ω resistors are connected in parallel.

Answer: Your answer is "erect".

Explanation:

Got this one right on the quiz.

Answer:

B)  Solvent

Explanation:

This is because the solute is dissolved in the solvent.

In the example of salt water, the water is the solvent and the salt is the solute.

The solute is substance being dissolved.

The solvent is what the solute is being dissolved in.

Answer:

I believe its: A wave with a shorter wavelength has higher frequency

According to the diagram, the wavelength with a shorter wavelength has higher frequency. Thus, the correct option is B.

A wave is a disturbance in a medium which carries energy without a net movement of particles in the medium. A wave may take the form of elastic deformation, a variation of the pressure, electric or magnetic intensity, electric potential, or the temperature of the medium or surrounding atmosphere.

Wavelength can be defined as the distance between identical points such as troughs and crusts in the adjacent cycles of a waveform signal which propagated in space or along a wire. Wavelength is inversely proportional to the frequency of wave.

Therefore, the correct option is B.

Learn more about Wave here:

https://brainly.com/question/25954805

#SPJ6

Answer:

mechanical pencil lead

iron

silver

brass

copper

yarn

Answer:

C

Explanation:

I would try c but i'm not 100% positive

Answer:

c

Explanation:

its C because energy cant be destroy nor created its just can be transfer in a way such as the chemical solution that release energy to propel the cannonball thus the kinetic energy (movement)

Answer:

TRUE

Explanation:

Answer:

True

Explanation:

All electromagnetic waves travel at the same speed through empty space. That speed, called the speed of light, is 300 million meters per second (3.0 × 108 m/s).

Answer:

it should be B let me know if i am wrong

Explanation:

Answer:

Mercury orbits the fastest around the Sun.

Answer:the one which is closest to the sun

Explanation:

Answer: it's A hope this helps

Explanation:

Answer:

A. A substance feels warm.

D. One substance transfers some of its thermal energy to another substance.

E. Two substances differ in temperature.

Explanation:

Answer:

The answer is 4200 J.

Explanation:

The formula of work done is, W = F×D where F is the force of an object and D is the distance. Then you just substitute the values into the equation :

W = F×D

F = 42N

D = 100m

W = 42 × 100

= 4200 J

The work done by the mountain climber who weighs 42.0 N and climbs a hill 100 meters high is 4200 joules, calculated using the formula for work done W = Fd.

The student's question relates to the concept of work done, which is a topic in Physics. To calculate work done, you can use the formula W = Fd, where W is work, F is force, and d is displacement (in the direction of force). In this case, the displacement would be the vertical height the mountain climber ascends, which is 100 meters.

The force is the weight of the mountain climber, which is given as 42.0 N. Applying the formula W = Fd, we get W = 42.0 N * 100 m, which equals 4200 joules. This represents the gravitational work done by the climber as he elevates himself against the pull of gravity over a vertical distance of 100 meters.

Final answer:

Glue requires particles to collide with sufficient energy and proper orientation to break old bonds and form new ones, relying on adhesive and cohesive forces.

Explanation:

For glue to effectively form a bond between two materials, there are two fundamental requirements. First, the particles must collide with each other. Without this collision, the atoms from the different materials cannot come into close enough contact to form a bond. Second, these colliding particles must come together with sufficient energy to break existing bonds and form new ones. Additionally, the particles must have the proper orientation during the collision to allow the right atoms to come into contact and form the new bond.

It is also important to understand the types of forces at play: cohesive forces, which bind molecules of the same type together, and adhesive forces, which bind a substance to a surface. In chemical bonds, electrostatic forces are crucial as they involve the attraction of positively charged nuclei to negatively charged electrons, leading to a bonding interaction when the system's energy is lowered.

Answer:

D. friction is the correct choice.

Explanation:

Friction is the resistance to motion of one object moving relative to another. It is not a fundamental force, like gravity or electromagnetism.

Answer:

friction

Explanation:

hope it helps :)

Answer:

231-91Pa>4-2a+227-89Ac

Explanation:

hope this helps

The equation for the alpha decay of  [tex]^{231} _{91}Pa[/tex] is written as [tex]^{231}_{91}Pa\ ---> \ ^4_2\alpha \ + \ ^{227} _{89}Ac[/tex].

Alpha decay is a type of radioactive decay in which an atomic nucleus emits an alpha particle.

The emission of this alpha particle reduces the mass number of the original atom by 4 and the atomic number by 2.

The alpha decay equation is written as;

[tex]^a_zX\ ---> \ ^4_2\alpha \ + \ ^{a-4} _{z-2}Y[/tex]

When the given atom ([tex]^{231} _{91}Pa[/tex]) under goes alpha decay, the resulting element is written using the following equation;

[tex]^{231}_{91}Pa\ ---> \ ^4_2\alpha \ + \ ^{227} _{89}Ac[/tex]

Thus, the equation for the alpha decay of  [tex]^{231} _{91}Pa[/tex] is written as [tex]^{231}_{91}Pa\ ---> \ ^4_2\alpha \ + \ ^{227} _{89}Ac[/tex].

Learn more here: https://brainly.com/question/13159640

Explanation:

q = mCΔt

q = (2.3 kg) (385 J/kg/K) (80.0°C − 20.0°C)

q ≈ 53,000 J

q ≈ 53 kJ

The thermal energy absorbed by 2.3 kg copper wire when its temperature raises from 20 to 80 degree Celsius is 53.13 J.

The specific heat capacity of substance is the heat energy required to raise its temperature by one degree Celsius per one gram. The specific heat capacity of metallic copper is 0.385 J/ °C g.

The calorimetric equation relating the heat energy q with the mass m, temperature difference ΔT and specific heat c is given by :

q = m c  ΔT.

Given the mass of the copper wire = 2.3 Kg

temperature difference  ΔT = 80 -20 = 60 °C.

specific heat of copper = 0.385 J/ °C g

q = 2.3 Kg × 0.385 J/ °C g × 60 °C

  = 53.13 J

Therefore, the thermal energy required for the copper wire to raise its temperature is 53.13 J.

To find more on calorimetry, refer here:

https://brainly.com/question/11477213

#SPJ2

Answer:

B

Explanation:

the answer is b because the man has a deeper voice than the womans high pitched voice

a) i) See graph in attachment

ii) See graph in attachment.

b) i) All of them

ii) none

c) [tex]s=\frac{4D tan \theta}{\mu_s}[/tex]

d) See explanation below

Explanation:

a)

Find in attachment the graph showing the kinetic energy and the potential energy versus the position, x.

i)

Between x = -D and x = 0, the block is sliding down along the ramp. The kinetic energy of the block at any time is given by:

[tex]KE=\frac{1}{2}mv^2[/tex]

where

m is the mass of the block

v is its speed

At the beginning, the block's kinetic energy is zero, because the speed is initially zero: since v = 0, KE = 0.

As the block slides down, the kinetic energy increases, because the speed of the block increases; at x = 0 (end of the ramp), all the initial energy has been converted into kinetic energy, which is now maximum.

Then, the block slides along the flat, rough surface; as friction does (negative) work on the block, the speed of the block decreases, and so also its kinetic energy decreases, becoming zero when x = +4D (when the block comes to a stop).

ii)

The potential energy of the block is given by:

[tex]GPE=mgh[/tex]

where

m is the mass of the block

g is the acceleration due to gravity

h is the height of the block above the ground

At the beginning (x = -D) the potential energy is maximum since the block is at maximum height.

When the block slides down (between -D and 0), the height h decreases, therefore the potential energy decreases as well, until reaching 0 when x = 0 (end of the ramp).

After x = 0, the block slides along the rough surface; however, its potential energy here no longer changes, as the height h dors not change (the surface is horizontal).

b)

Here, the block is released from the top of a new ramp, which has a base length of 2D (instead of D) but same angle as before: therefore, the initial height of the ramp is twice that in part a). This also means that the initial (potential) energy of the block in this case is twice the GPE of part a):

[tex]GPE'=2GPE[/tex]

As a result, when the block reaches the end of the ramp at x = 0, it will have twice the kinetic energy it had before:

[tex]KE'=2KE[/tex]

The stopping distance of an object moving with accelerated motion is proportional to its initial kinetic energy:

[tex]s\propto KE[/tex]

Therefore, this means that here the stopping distance of the block will be twice that of part a (which was 4D), so the block will stop at x = +8D.

So, all aspects of the student's reasoning are correct.

c)

Let's call [tex]E[/tex] the initial total energy of the block at the top of the ramp.

In situation a), the initial total energy is

[tex]E=GPE=mgh = mgD tan \theta[/tex]

where [tex]h=Dtan \theta[/tex] is the height of the ramp.

And so the kinetic energy at the bottom of the ramp is

[tex]KE=E[/tex]

We can rewrite the kinetic energy so that

[tex]\frac{1}{2}mv^2=E \rightarrow v \sqrt{\frac{2E}{m}}\\\rightarrow v=\sqrt{2gD tan \theta}[/tex]

For an accelerated motion, the stopping distance can be found using the equation

[tex]v'^2-v^2=2as[/tex]

where

[tex]v'=0[/tex] is the final speed of the block

[tex]a=-\mu_b g[/tex] is the acceleration due to friction

So we find

[tex]s=\frac{-v^2}{2a}=\frac{(2gD tan \theta)}{\mu_s g}=\frac{2D tan \theta}{\mu_s}[/tex] (1)

In situation b), the initial height of the block is

[tex]h=2D tan \theta[/tex]

So the final stopping distance becomes (1)

[tex]s=\frac{4D tan \theta}{\mu_s}[/tex]

d)

We can see that the formula derived in part c) depends only on:

- The initial height of the ramp, which is [tex]Dtan \theta[/tex] in part a) and [tex]2D tan \theta[/tex] in part b)

- The coefficient of friction in the rough part, [tex]\mu_s[/tex]

- The angle of the ramp, which remains the same in the two cases

Therefore, all the correct aspects identified by the student in his reasoning are found in the fact that the final stopping distance is proportional to the initial energy of the block, which is proportional to initial height of the block, and since this is twice in part b) compared to part a), therefore the stopping distance is also twice in part b).

Refer the below solution for better understanding.

Given :

Block has initial velocity, u = 0.

Base of the ramp has a length of D.

Negligible friction between the block and the inclined ramp.

Coefficient of kinetic friction between the block and the rough horizontal surface is [tex]\rm \mu_ b[/tex].

Solution :

a)  Graph of the following quantities is attached below.

i) We know that the Kinetic energy is,

[tex]\rm KE = \dfrac{1}{2}mv^2[/tex]

at x = 0, KE is zero because initial velocity is zero but kinetic energy increases as velocity increases. And at an instant kinetic energy becomes maximum because velocity is maximum.

When the block slides along the flat, rough surface, friction acts on the block, the speed of the block decreases, so kinetic energy is also decreases and becomes zero at x = 4D.

ii) We know that potential energy is given by,

PE = mgh

At x = -D , height of the block is maximum therefore potential is also maximum at x = -D. The potential energy decreases as well, until reaching 0 when x = 0.

b) The initial height of the ramp is twice that in part a). This also means that the initial (potential) energy of the block in this case is twice the PE of part a). As a result, when the block reaches the end of the ramp at x = 0, it will have twice the kinetic energy it had before.

Stopping distance is proportional to its initial kinetic energy:

Therefore, the stopping distance of the block will be twice that of part a), so the block will stop at x = 8D.

Therefore, all aspects of the student's reasoning are correct.

c) Initial total energy is,

E = PE

[tex]\rm E= mgh = mgDtan\theta[/tex]

Kinetic energy at bottom of the ramp is,

KE = E

[tex]\rm \dfrac{1}{2}mv^2 = mgDtan\theta[/tex]

[tex]\rm v = \sqrt{2gDtan\theta}[/tex]

We know that,

[tex]\rm v'^2 = u^2 +2as[/tex]

here,

[tex]\rm v' = 0[/tex] and [tex]\rm a = -\mu_bg[/tex] (acceleration due to friction). So,

[tex]\rm s = \dfrac{-u^2}{2a}[/tex]

[tex]\rm s = \dfrac{2gDtan\theta}{\mu_bg}[/tex]

[tex]\rm s = \dfrac{2Dtan\theta}{\mu_b}[/tex]   ----- (1)

In section b) h = [tex]\rm2Dtan\theta[/tex]

Now equation (1) becomes,

[tex]\rm s = \dfrac{4Dtan\theta}{\mu_b}[/tex]

d) We can see that the formula derived in part c) depends only on:

The initial height of the ramp, which is [tex]\rm Dtan\theta[/tex] in part a) and [tex]\rm 2Dtan\theta[/tex] in part b).

The coefficient of friction in the rough part, [tex]\mu _s[/tex].

The angle of the ramp, which remains the same in the two cases.

Therefore, all the correct aspects identified by the student in his reasoning are found in the fact that the final stopping distance is proportional to the initial energy of the block, which is proportional to initial height of the block, and since this is twice in part b) compared to part a), therefore the stopping distance is also twice in part b).

For more information, refer the link given below

https://brainly.com/question/999862?referrer=searchResults

Answer: ( A ) - asteriods

Explanation: because most asteriods are in the asteriods belt , and the largest asteroid in Ceres , which is 583 miles across , still holding the record .

Asteroids refer to the type of body which is the largest in this scenario and is denoted as option 1.

These are rocky objects which orbit the sun and are smaller which is why they aren't referred to as planets.

They are however bigger than the meteoroids and comets which makes it the most appropriate choice.

Read more about Asteroid here https://brainly.com/question/11996385

#SPJ2