Lithium hydroxide is used to purify air by removing carbon dioxide. a 25.00ml sample of lithium hydroxide solution is titrated to an end point by 15.22 ml of a 0.3340m hydrochloric acid solution. what is the molarity of the lioh solution

Answers

Answer 1
the balanced reaction between LiOH and HCl is as follows
LiOH + HCl ----> LiCl + H₂O
stoichiometry of LiOH to HCl is 1:1
number of moles of HCl reacted = concentration of HCl x volume 
number of HCl moles = 0.3340 mol/L x (15.22 x 10⁻³ L) = 5.083 x 10⁻³ mol 
according to molar ratio
number of HCl moles = number of LiOH moles
number of LiOH moles in 25.00 mL = 5.083 x 10⁻³ mol 
therefore LiOH moles in 1 L = 5.083 x 10⁻³ mol / (25.00 x 10⁻³ L) = 0.2033 mol/L
molarity of LiOH - 0.2033 M

Related Questions

How does nh3 and ca(OH)2 form OH- ions in water?

Answers

Ca(OH)2 dissociates in water.
NH3 makes NH4 and OH via acid base equilibrium

Solid metals undergo greater thermal expansion than liquids do.

Answers

Answer:

false

Explanation:

Final answer:

Thermal expansion is the increase or decrease in size of a body due to a change in temperature. Solid metals undergo greater thermal expansion than liquids. This is because the closely packed atoms or molecules in solid metals are pushed farther apart by the increase in temperature, resulting in a larger size for the whole body.

Explanation:

Thermal expansion: Thermal expansion is the increase, or decrease, of the size (length, area, or volume) of a body due to a change in temperature. It occurs in all dimensions - length, area, volume - and is not limited to solid metals. However, solid metals undergo greater thermal expansion than liquids do. The increased thermal expansion in solid metals can be attributed to their closely packed atoms or molecules, which are pushed farther apart by the increase in temperature, resulting in a larger size for the whole body.

How much is 2.50 g of CuCl2 in moles ?

Answers

The molar mass of CuCl2 is 134.45 g/mol; therefore, you divide 2.5 g of CuCl2 by 134.45 g of CuCl2 leaving you with 0.019 moles. 
I hope this works.
PLEASE GIVE ME A BRAINIEST CROWN.

The term used to describe the rapid release of bubbles from a liquid is _____

Answers

The term used to describe the rapid release of bubbles, or rapid release of a gas from a liquid or a solution is called Effervescence.  The bubbling of a solution is due to the escape of a gas which may be from a chemical reaction, as in fermenting liquid, or by coming out of a solution after having been under pressure, as in a carbonated drink. For example; soda, champagne among others.

An iv solution contains 5.10g glucose in 100.5 ml water. what is the molarity of the solution? the molar mass of glucose is 180g/mol. molarity: mol solute/l solution

Answers

molarity is defined as the number of moles of solute in 1 L of solvent 
number of moles of glucose = mass of glucose present / molar mass of glucose
number of glucose moles = 5.10 g / 180 g/mol = 0.0283 mol
there are 0.0283 mol in 100.5 mL water
we need to find the number of glucose moles in 1000 mL 
therefore in 1000 mL there are - 0.0283 mol / (100.5 x 10⁻³ L) = 0.282 mol/L
molality of solution - 0.282 M
Final answer:

The molarity of the solution is 0.279 M.

Explanation:

To find the molarity of the solution, we need to calculate the number of moles of glucose and the volume of the solution in liters. The molarity is defined as moles of solute per liter of solution.

First, we calculate the number of moles of glucose:

Moles of glucose = mass of glucose / molar mass of glucose

Moles of glucose = 5.10 g / 180 g/mol = 0.028 moles

Next, we calculate the volume of the solution in liters:

Volume of solution = 100.5 ml / 1000 = 0.1005 L

Finally, we plug in the values into the molarity formula:

Molarity = moles of glucose / volume of solution

Molarity = 0.028 moles / 0.1005 L = 0.279 M

Learn more about Molarity of a solution here:

https://brainly.com/question/18648803

#SPJ11

Which best describes the tyndall effect? the scattering of light by solutes in a mixture the scattering of light by solvent in a solution the scattering of light by solutes in a solution the scattering of light by particles in a mixt?

Answers

the scattering of light by particles in a mixture

Answer:The correct answer is option:'the scattering of light by particles in a mixture'.

Explanation:

Tyndall effect is defined as scattering of the light by the particles present in the mixture. A beam of the light passing through these mixture are visible to the human eyes. Generally colloidal mixture displays this type of effect. The name of his effect is named after the physicist named John Tyndall.

Hence, the correct answer is option:'the scattering of light by particles in a mixture'.

The​ half-life of the radioactive element unobtanium dash 53 is 20 seconds. if 32 grams of unobtanium dash 53 are initially​ present, how many grams are present after 20 ​seconds? 40 ​seconds? 60 ​seconds? 80 ​seconds? 100 ​seconds?

Answers

Answer: After 20 seconds, 16 grams of unobtanium will be present, after 40 seconds, 8 grams of unobtanium will be present after 60 seconds, 4 grams of unobtanium will be present, after 80 seconds, 2 grams of unobtanium will be present and after 100 seconds, 1 grams of unobtanium will be present.

Explanation: Half life is the time in which half of the reaction is completed. Thus the half of the substance will be decomposed and half of it will remain.

Amount of the substance left after n half lives will be=[tex]\frac{A}{2^n}[/tex]

where A= initial amount of substance

n=no of half lives=[tex]\frac{\text{given time}}{\text{half life}}[/tex]

a) t= 20 seconds

no of half lives=[tex]\frac{20}{20}=1[/tex]

amount of the substance left after 1 half life will be=[tex]\frac{32}{2^1}[/tex]=16 g.

b)  t= 40 seconds

no of half lives=[tex]\frac{40}{20}=2[/tex]

amount of the substance left after 2 half lives will be=[tex]\frac{32}{2^2}[/tex]=8g.

c) t= 60 seconds

no of half lives=[tex]\frac{60}{20}=3[/tex]

amount of the substance left after 3 half lives will be=[tex]\frac{32}{2^3}=4g[/tex]

d) t= 80 seconds

no of half lives=[tex]\frac{80}{20}=4[/tex]

amount of the substance left after 4 half lives will be=[tex]\frac{32}{2^4}=2g[/tex]

e) t= 100 seconds

no of half lives=[tex]\frac{100}{20}=5[/tex]

amount of the substance left after 5 half lives will be=[tex]\frac{32}{2^5}=1g.[/tex]




The half-life of a radioactive element is defined as the time required by the specific isotope to decrease by half of its original value. The unobtanium after given time will be present as:

After 20 secs, 16 gramsAfter 40 secs, 8 gramsAfter 60 secs, 4 gramsAfter 80 secs, 2 gramsAfter 100 secs, 1 gram

Half-life is the time required by the unobtanium is the half of the reaction is completed. Half of the substance will be decomposed, such that:

Amount of substance left n half-lives = [tex]\dfrac{\text A}{{2}^{\text n}}[/tex]

where A= initial amount of substance

Now,

n = number of half-lives = given time /half-life

Given,

1. Time = t = 20 seconds

Number of half-lives = [tex]\dfrac{20}{20}[/tex] = 1Amount of the substance left after 1 half life =  [tex]\dfrac{\text 32}{{2}^{\text 1}}[/tex] = 16 grams.

2.Time = t = 40 seconds

Number of half-lives = [tex]\dfrac{40}{20}[/tex] = 1Amount of the substance left after 1 half life =  [tex]\dfrac{\text 32}{{2}^{\text 2}}[/tex] = 8 grams.

3.Time = t = 60 seconds

Number of half-lives = [tex]\dfrac{60}{20}[/tex] = 1Amount of the substance left after 1 half life =  [tex]\dfrac{\text 32}{{2}^{\text 3}}[/tex] = 4 grams.

4.Time = t = 80 seconds

Number of half-lives = [tex]\dfrac{80}{20}[/tex] = 1Amount of the substance left after 1 half life =  [tex]\dfrac{\text 32}{{2}^{\text 4}}[/tex] = 2 grams.

5.Time = t = 100 seconds

Number of half-lives = [tex]\dfrac{100}{20}[/tex] = 1Amount of the substance left after 1 half life =  [tex]\dfrac{\text 32}{{2}^{\text 5}}[/tex] = 1 grams.

To know more about half-life, refer to the following link:

https://brainly.com/question/2057910?referrer=searchResults

What mass of co2 is produced by the combustion of 1.00 mol of ch4?

Answers

the balanced equation for the combustion of CH₄ is as follows
CH₄ + 2O₂ ---> CO₂  + 2H₂O
stoichiometry of CH₄ to CO₂ is 1:1
therefore molar ratio of CH₄ to CO₂ is 1:1
the number of CH₄ moles combusted - 1.00 mol 
 number of CO₂ moles formed = number of CH₄ moles reacted
therefore number of CO₂ mol formed - 1.00 mol
mass of CO₂ produced - 1.00 mol x 44 g/mol = 44.0 g
mass of CO₂ produced is 44.0 g

Final answer:

The combustion of 1.00 mol of CH4 produces 44.01 grams of CO2, as one mole of methane combusts to create one mole of carbon dioxide, and the molar mass of CO2 is 44.01 g/mol.

Explanation:

The mass of CO2 produced by the combustion of 1.00 mol of CH4 can be calculated by looking at the balanced chemical equation:

CH4(g) + 2O2(g) → CO2(g) + 2H2O(l)

From the equation, it is clear that one mole of methane (CH4) produces one mole of carbon dioxide (CO2) upon combustion. To convert moles of CO2 to grams, we use the molar mass of CO2, which is 44.01 g/mol.

Calculation:

1.00 mol CH4 × (44.01 g CO2 / 1 mol CO2) = 44.01 g CO2

Therefore, the combustion of 1.00 mol of CH4 will produce 44.01 grams of CO2.

How are genes related to DNA?


A-Genes are sections of DNA that program the amino acid sequences of proteins.

B-Genes are monomers that are joined by dehydration synthesis to make DNA.

C-Genes are proteins that bind molecules of DNA together to make amino acids.

D-Genes are monomers that are joined by hydrolysis to make DNA.


Answers

the answer to your question would be A. hope this helps...
B-Genes are monomers that are joined by dehydration synthesis to make DNA.

Which of the following is an example of chemical weathering? a. waves washing over rocks on the beach b. acid rain falling on sidewalks c. ice forming in the cracks of rocks d. wind blowing against rocks

Answers

B. acid rain falling on sidewalks

Answer:

b. Acid rain falling on sidewalks

Explanation:

Hello,

Acid rain contains majorly carbonic acid [tex]H_2CO_3[/tex] which could react with the concrete that is used to make sidewalks. This chemical reaction, although varies based on the concrete's composition, usually gives off carbon dioxide owing to the acid's instability and leads to the weathering since the sidewalks start to wear out and subsequently break down.

Best regards.

Potassium-40 has a half-life of 1.3 billion years. as the potassium-40 isotope decays, it becomes argon. if a rock was formed with 12 g of potassium-40, approximately how long would it take for 75% of the potassium-40 to be replaced by argon?
a. 1.3 billion years
b. 2.6 billion years
c. 5.2 billion years
d. 650 million years

Answers

Final answer:

It takes two half-lives, or 2.6 billion years, for 75% of Potassium-40 to decay to Argon, making (b) 2.6 billion years the correct option.

Explanation:

The decay of Potassium-40 (K-40) to Argon (Ar-40) follows the principles of radioactive decay and the concept of half-lives. The half-life is the time it takes for half of the original quantity of a radioactive isotope to decay. In this case, K-40 has a half-life of approximately 1.3 billion years. After one half-life, there would be 6 grams of K-40 and 6 grams of Ar-40. After two half-lives, which is 2.6 billion years, there would be 3 grams of K-40 and 9 grams of Ar-40. Since the question asks for the time it would take for 75% of the potassium-40 to be replaced by argon, we are looking for the time it takes to have only 25% of the original K-40 remaining.

Starting with 12 grams of K-40, after the first half-life, we would be left with 6 grams of K-40, which is 50%. After the second half-life, we would be left with 3 grams of K-40, which is 25% of the original amount. Therefore, it would take two half-lives for 75% of the potassium-40 to decay to argon, which equates to 2.6 billion years. The correct option is therefore (b) 2.6 billion years.

What is the standard cell notation for an electrolytic cell with aluminum and gold electrodes?

Answers

Answer:

Au3+

Explanation:

The standard cell notation for an electrolytic cell with aluminum and gold electrodes  Au(s)| Au³⁺  ||   Al³⁺| Al (s)

What is an Electrolytic Cell ?

A device in which electrical energy is converted into chemical energy or chemical energy is converted into electric energy is called an Electrolytic cell

The electrolytic cell consists of two metallic electrodes and an electrolyte.

In this cell nomenclature, the electrode to the left of the salt bridge is always assumed to be the anode, and the accompanying half-equation is always stated as an oxidation , while right side is cathode and the half equation is Reduction.

Reaction at Anode: Au(s) → Au³⁺(aq) + 3e⁻  ..........(oxidation)

Reaction at Cathode: Au³⁺(aq) + 3e⁻ →Au(s) ..............(reduction)

The standard cell notation for an electrolytic cell with aluminum and gold electrodes

                         Au(s)| Au³⁺  ||   Al³⁺| Al (s)

To know more about Electrolytic Cell

https://brainly.com/question/4030224

#SPJ2

How many electrons are transferred during the formation of one molecule of al2o3?

Answers

Final answer:

In the formation of one molecule of aluminum oxide (Al2O3), a total of 6 electrons are transferred from two aluminum atoms to three oxygen atoms to maintain electrical neutrality.

Explanation:

The formation of one molecule of aluminum oxide (Al2O3) involves the transfer of electrons between aluminum atoms and oxygen atoms. Each aluminum atom loses three electrons, becoming Al3+ ions, while each oxygen atom gains two electrons to become O2- ions. To maintain electrical neutrality, the compound must have equal numbers of positive and negative charges.

Therefore, to form one molecule of Al2O3, two aluminum atoms (2 Al) will lose a total of 6 electrons (2 Al × 3 e-), and three oxygen atoms will gain a total of 6 electrons (3 O × 2 e-) during the electron transfer process. The complete transfer involves 12 electrons changing places but, in effect, the number of electrons transferred is the total on one side of the reaction which is 6.

In the formation of a solution how does the solvent differ from the solute

Answers

Solute is a substance that dissolves in a solvent in order to form a solution. Solutes can be in liquid, gaseous or solid phase. Normally, in a solution, solutes are in a lesser amount than the solvents. When a solution has the maximum amount of solutes it can dissolve, then the solution is said to be saturated.

How many nitrogen molecules are in a 8.86 L container of nitrogen gas at a pressure of 112.1 kPa and a temperature of 30.8 oC?

Answers

we can first find the number of moles of nitrogen gas in the container using th ideal gas law equation 
PV = nRT
where P - pressure - 112 100 Pa
V - volume - 8.86 x 10⁻³ m³
n - number of moles 
R - universal gas constant - 8.314 Jmol⁻¹K⁻¹
T - temperature in kelvin - 30.8 °C + 273.15 = 303.95 K
substituting these values in the equation 
112 100 Pa x 8.86 x 10⁻³ m³ = n x 8.314 Jmol⁻¹K⁻¹ x 303.95 K
n = 0.393 mol 
number of N₂ moles are 0.393 mol

In 1 mol of N₂ there are 6.022 x 10²³ molecules of N₂
therefore in 0.393 mol - 6.022 x 10²³ mol⁻¹ x 0.393 mol = 2.37 x 10²³ 
there are 2.37 x 10²³ molecules of N₂
We will use this law PV = nRT
we have to convert pressure from kPa to atm
1 atm = 101.325 kPa
? atm = 112.1 kPa
P = 1.11 atm
T = 30.8 °C + 273.15 = 303.95 K
V = 8.86 L
R = 0.088205 atm. L / mol . Kelvin
n = [tex] \frac{PV}{RT} = \frac{1.11 * 8.86}{0.08205 * 303.95} [/tex] = 0.39 mol
number of N₂ molecules = number of moles * Avogadro's number
                                        = 0.39 * (6.022 * 10²³) = 2.37 x 10²³ molecules 

Know how the rate of a chemical reaction is defined in terms of reactants or products.

Answers

What are the answer questions??

What do microarrays allow scientists to do

Answers

Hello there!


Microarrays allow scientists to examine how active thousands of genes are.



I hope this helps! Let me know if you have more questions. 

How many grams of fluorine must be reacted with excess lithium iodide to produce 10.0 grams of lithium fluoride?

Answers

Answer:
             7.32 g of F₂

Solution:
              The equation is as follow,

                                   2 LiI  +  F₂    →    2 LiF  +  I₂

According to equation,

           51.88 g (2 mole) of LiF is produced from  =  37.99 g (1 mole) F₂
So,
                          10 g of LiF will be produced by  =  X g of F₂

Solving for X,
                      X  =  (10 g × 37.99 g) ÷ 51.88 g

                      X  =  7.32 g of F₂

Rubbing alcohol is 70.% isopropyl alcohol by volume. how many ml of isopropyl alcohol are in a 1 pint (473 ml) container? 330 ml 680 ml 0.15 ml 70. ml 470 ml

Answers

move the decimal to the left 2 spaces then mult that by the number of mls.
0.70 times 473 = 331ml

A gas sample has a volume of 150 ml at 0.00 ∘c. the temperature is raised (at constant pressure) until the volume is 218 ml. what is the temperature of the gas sample in ∘c at this volume?

Answers

Charles law gives the relationship between volume and temperature of a gas. 
It states that at constant pressure, volume is directly proportional to temperature of gas. 
V/ T = k
where V -volume , T - temperature and k - constant 
[tex] \frac{V1}{T1} = \frac{V2}{T2} [/tex]
parameters for the first instance are given on the left side and parameters for the second instance are given on the right side of the equation 
T1 - temperature in kelvin 0.0 °C + 273 = 273 K
substituting the values in the equation 
[tex] \frac{150 mL}{273 K} = \frac{218 mL}{T} [/tex]
T = 397 K 
temperature in celcius - 397 K - 273 = 124 °C
new temperature is 124 °C

Calculate the theoretical yield if 100.0 g p4o10 react with 200.0 g h2o

Answers

The reaction of Phosphorous Pentaoxide with water yield Phosphoric Acid as shown below,

                             P₄O₁₀  +  6 H₂O   →    4 H₃PO₄

According to balance equation,

           283.88 g (1 mole) P₄O₁₀ requires  =  108 g (6 mole) of H₂O
So,
                          100 g P₄O₁₀ will require  =  X g of H₂O

Solving for X,

                        X  =  (100 g × 108 g) ÷ 283.88 g

                        X  =  38.04 g of H₂O

So, 100 g P₄O₁₀ requires 38.04 g of H₂O, while we are provided with 200 g of H₂O which means that water is in excess and P₄O₁₀ is limiting reagent. Therefore, P₄O₁₀ will control the yield of H₃PO₄. So,
As,
           283.88 g (1 mole) P₄O₁₀ produced  =  391.96 g (4 mole) of H₃PO₄
So,
                          100 g P₄O₁₀ will produce  =  X g of H₃PO₄

Solving for X,
                             X  =  (100 g × 391.96 g) ÷ 283.88 g

                             X  =  138.07 g of H₃PO₄

Result:
           
Theoretical Yield of this reaction is 138.07 g.

What is the theoretical yield in liters of hydrogen at STP if 20.1g of calcium are completely reacted

Answers

Calcium reacts with water to produce Calcium Hydroxide and Hydrogen gas;

                            Ca  +  2 H₂O    →    Ca(OH)₂  +  H₂

According to balance equation,

                 40 g (1 mole) Ca reacts to form  =  22.4 L (1 mole) H₂
So,
                           20.1 g of Ca will produce  =  X L of H₂

Solving for X,,
                                        X  =  (22.4 L × 20.1 g) ÷ 40 g

                                        X  =  11.25 L

Result:
          Theoretical Yield of H₂ at STP  =  11.25 Liter

A 94.7-g sample of silver (s = 0.237 j/(g · °c)), initially at 348.25°c, is added to an insulated vessel containing 143.6 g of water (s = 4.18 j/(g · °c)), initially at 13.97°c. at equilibrium, the final temperature of the metal–water mixture is 22.63°c. how much heat was absorbed by the water? the heat capacity of the vessel is 0.244 kj/°c.

Answers

Q = m*C*dT

m = mass

C = specific heat capacity

dT = Temperature change

Q = heat evolved

Heat lost by metal is equal to the sum of heat taken up by water and vessel. Since water is taken in the vessel so

the initial and final temperatures would be same for vessel and water...

Q = 94.7 *0.237 *(22.63 - 348.25) = 7308.18 Joules = 7.3 KJ

Heat lost by silver = 7.3 KJ

Heat absorbed by water = 143.6*4.18*(22.63 - 13.97) = 5.2 KJ

J. J. Thomson’s experiment disproved the theory that an atom is divisible. is indivisible. contains protons. contains electrons.

Answers

J. J. Thomson’s experiment disproved the theory that an atom is indivisible.

J.J. Thomson's experiment did not disprove the theory that atoms are indivisible. Instead, his experiment demonstrated the presence of subatomic particles, specifically electrons, within atoms.

The atom's indivisibleness was not refuted by J. J. Thomson's experiment. Instead, his research demonstrated that electrons, a type of subatomic particle, are present in atoms. The "plum pudding" model of the atom was created as a result of Thomson's research from the late 19th and early 20th centuries, which advanced knowledge of atomic structure.

Thomson studied the behavior of electrically charged particles (electrons) inside a vacuum tube in his well-known cathode ray tube experiment. A stream of negatively charged particles (electrons) traveled from the cathode (negative electrode) to the anode (positive electrode) when a voltage was applied across the tube. Thomson came to the conclusion that these particles were the basic building blocks of atoms.

The old belief that atoms were indestructible was refuted by Thomson's discovery of electrons within them, which also supported the notion of subatomic particles inside the atom. His "plum pudding" concept proposed that atoms had a neutral overall charge because electrons were contained within a positively charged "pudding" or matrix.

Later investigations, like those by Ernest Rutherford, helped to clarify our understanding of atomic structure and revealed the existence of a positively charged nucleus that contains protons as well as neutral particles known as neutrons. The existence of indivisible atoms was therefore not refuted by Thomson's experiment, but it did introduce the idea of subatomic particles within atoms, particularly electrons.

To know more about protons:

https://brainly.com/question/12535409

#SPJ3

What kind of reaction occurs when the entropy change of an endothermic reaction is negative?

Answers

Answer is: reaction is nonspontaneous under standard conditions at all temperatures.

Gibbs free energy (G) determines if reaction will proceed spontaneously.
ΔG = ΔH - T·ΔS.
ΔG - changes in Gibbs free energy.
ΔH - changes in enthalpy.
ΔS - changes in entropy.
T is temperature in Kelvins.
When ΔS < 0 (negative entropy change) and ΔH > 0 (endothermic reaction), the process is never spontaneous (ΔG> 0).


Answer:

reaction is nonspontaneous under standard conditions at all temperatures.

Explanation:

took the test.

Write out the balanced equation for the reaction that occurs when Mg(OH)2 and HCl react together.

Answers

Mg(OH)2 + HCl —> H2O + MgCl2

Answer:

The balanced equation for the reaction that occurs when Mg(OH)2 and HCl react together is:

Mg(OH)2+2HCl -------->MgCl2+2H20

What is a characteristic of all fuel cells?
Energy from the Sun is converted into electricity.
Electrical energy is produced from oxidation reactions.
Oxidation reactions are used to produce thermal energy.
A constant source of energy is not required.

Answers

B. Electrical energy is produced from oxidation reactions. 
I don't have an explanation for this though. Do you need one? I can probably look it up.

Answer:

Electrical energy is produced from oxidation reactions.

Explanation:

In fuel cells elecric energy is produced from the oxidation of reactants, that fuel is often Hydrogen, that is storaged in the fuel cell and then it just grabs oxygen from the air and converts that chemical reaction of oxidation in electric current.

How many sites on this antibody molecule have potential to bind to a non-self molecule?

Answers

There are two sites on the antibody molecule that have a potential to bind to a non-self molecule. The Fab of an antibody is the region of the antibody that binds to an antigen. It consist of one constant and one variable domain from each heavy and light chain of the antibody. During immune reaction, an antigen-antibody reaction occurs between the antibodies made by the B cells and the antigens.

How many moles of gas occupy 98 l at a pressure of 2.8 atmospheres and a temperature of 292 k?

Answers

From the ideal gas equation, we know that PV = nRT
where, P = pressure, V = volume occupied, n = number of moles of gas, R = universal gas constant=0.082L atm mol-1 K-1 and T = temperature.
Given: P = 2.8 atm, V = 98 l and T = 292 k.
Therefore n =[tex] \frac{PV}{RT} [/tex] = [tex] \frac{2.8 X 98}{0.082 X 292} [/tex] = 11.46

"11.46" moles of gas occupy 98 L at 2.8 atm pressure.

Ideal gas equation:

The equation characterizing the stages of hypothetical gasses stated mathematically involving combinations of empirical as well as physiological constants, is considered as Ideal gas equation.

According to the question,

Volume occupied, V = 98

Temperature, T = 292 k

Pressure, P = 2.8 atm

By using ideal gas equation, we get

→ PV = nRT

or,

→ n = [tex]\frac{PV}{RT}[/tex]

By substituting the above values, we get

      = [tex]\frac{2.8\times 98}{0.082\times 292}[/tex]

      = [tex]\frac{274.4}{23.944}[/tex]

      = [tex]11.46[/tex]

Thus the above answer is appropriate.

Find out more information about Ideal gas equation here:

https://brainly.com/question/12873752

The formula for the illegal drug cocaine is c17h21no4 (303.39 g/mol). what is the percentage of hydrogen in the compound? 21.09% 4.618% 67.30% 6.991% 3.959%

Answers

molar mass is the sum of the products of molar masses of individual elements by the number of atoms of the element in the compound.
molar mass of H - 1.01 g
number of H atoms - 21 H atoms 
therefore mass of H in 1 mol of compound - 1.01 g x 21 = 21.21 g
the molar mass of the compound - 303.39 g/mol 
H composition percentage = [tex] \frac{mass of H in 1 mol}{molar mass of compound} *100%[/tex]
            composition percentage = 21.21 g/mol /303.39 g/mol x 100%
H composition percentage = 6.991 %

therefore answer is 6.99 %
Other Questions
if a right angle has a hypotenuse of 19 units and a leg with the length of 7 units, find the length of the other leg A certain company's main source of income is selling socks. The company's annual profit (in millions of dollars) as a function of the price of a pair of socks (in dollars) is modeled by: P(x)=-3(x-5)^2+12 . What sock price should the company set to earn a maximum profit? what is the capital of hawaii why does eugene skinner want to give up boxing The sum of three numbers is 62. The second number is equal to the first number diminished by 4. The third number is four times the first. What are the numbers? Genetic mutations can cause many different diseases and disorders. Which of the following diseases is caused by a genetic mutation?A. AIDSB.Cystic fibrosis C.Type 1 Diabetes D.rheumatoid arthritis I need to answer three questions about y = x^(-2) on the interval [-4, -1/2]. I have attached my questions and my answers as screenshots:Part 1 - ANSWER CPart 2 - ANSWER APart 3 - ANSWER BI am referring to each part in the order that I uploaded the screenshots. You will see that my answers are highlighted in blue. I like second opinions! Which part of the spermatozoa contains the most mitochondria?a. tailb. midpiecec. headd. acrosome? WILL GIVE BRAINLIEST Please help with geometry Review Questions1. Which myths and legends are common to many cultures?2. How do historical linguists trace a legend back to its roots?3. What are common mythemes in myths and legends?4. What themes do sacred myths often have in common?5. What are some of the shared symbols of sacred mythology?Critical Thinking Questions1. What conclusions can you draw from the many themes shared by sacred myths?2. What evidence is there that the myths of a world flood may be based on a historic event?3. Why is comparative mythology important to the study of myths?4. The cultural anthropologist Dr. Jamie Tehrani traced the story of Little Red Riding Hood back to a common ancestor over 2,600 years old. Why do you think the structure stayed the same even though he found so many variations and differences in story elements?5. Evil is often described in myths as entering the world after creation rather than being a part of it. Why do you think evil is not portrayed as an original part of creation?PLS submit at least one full paragraph for each question. At the end of the past month the cash account of a company had an ending balance of 6750. During the last month the account was debited for a total of 11350 and credited for a total of 10500. What was the balance in the cash account at the of the last month Why is it important for women to perform breast self - examinations? Piecewise function help! mr. martinez has 3 ice chests. he is placing 14 lunches in each ice chest. each lunch contains a sandwich, a bag of chips, and a drink. about 55% of these lunches contain a ham sandwich. which of the following is closest to the number of lunches that contain a ham sandwich? skillfull cultural allusions A.methodsB. dreamsC. referencesD. qualities Evaluate the numerical expression.3.8 4.8 0.4 2.4 PLEASE SOMEONE I AM SO DESPERATE like actually crying 1. The equation of a parabola is given. y=1/6x2+7x80 What is the equation of the directrix of the parabola?2. (y+2)^2= 129X-5) What is the equation of the directrix of the parabola? The depreciating value of a semi-truck can be modeled by y = Ao(0.87)x, where y is the remaining value of the semi, x is the time in years, and it depreciates at 13% per year.An exponential function comes down from the positive infinity and passes through the points zero comma eighty-seven thousand. The graph is approaching the x-axis.What is the value of the truck initially, Ao, and how would the graph change if the initial value was only $67,000? $90,000, and the graph would have a y-intercept at 20,000 $87,000, and the graph would have a y-intercept at 67,000 $87,000, and the graph would fall at a slower rate to the right $87,000, and the graph would fall at a faster rate to the right Which phrases from Queen Elizabeth's address to the troops at Tilbury rely on a rhetorical appeal to pathos? Check all that apply."my faithful and loving people""I have always so behaved myself""the loyal hearts and good will of my subjects""not for my recreation""my lieutenant-general shall be in my stead"