Match the term with the definition. Match Term Definition Compressibility A) Measure of how much heat is given off when a substance is burned Flammability B) The ability of a substance to damage or harm an organism Heat of combustion C) Measure of how much the volume of matter can decrease under pressure Toxicity D) How easily a substance can be set on fire

here rocket starts from rest

It turns the booster and continue with constant acceleration

[tex]a = 4 m/s^2[/tex]

now in order to find the final velocity we can use kinematics equation

[tex]v_f = v_i + at[/tex]

here we know that

[tex]v_i = 0[/tex]

t = 3 s

now plug in all data in above equation

[tex]v_f = 0 + 4*3[/tex]

[tex]v_f = 12 m/s[/tex]

so the rocket will move rightwards with speed 12 m/s after 3 s of boosters

Here when an object is placed on the level floor then in that case there are two forces on the object

1). Weight of object downwards (mg)

2). Normal force due to floor which will counterbalance the weight (N)

so when no force is applied on the box at that time normal force is counter balanced by weight.

Now here it is given that A person tried to lift the box upwards

So now there are two forces on the box

1). Applied force of person

2). Normal force due to ground

So now these two forces will counter balance the weight of the crate

So we can write an equation for force balance like

[tex]F_g = F_n + F_a[/tex]

given that

[tex]F_g = mg[/tex]

here

m = 30 kg and

g = acceleration due to gravity = 10 m/s^2

[tex]F_n = 150 N[/tex]

now from above equation

[tex]30*10 = 150 + F_a[/tex]

[tex]F_a = 300 - 150 = 150 N[/tex]

So force applied by the person must be 150 N

the answer is

144 N

i got it right

Can u tell me the answer choices? Than I will help.

Answer: Bernoulli’s

Explanation:

The periodic table on the left separates elements into three groups: the metals (green in the table), nonmetals (orange), and metalloids (blue). Most elements are metals. They are usually shiny, very dense, and only melt at high temperatures.

On the periodic table, representative metals are on the left side, transition metals and inner transition metals are in the centre. Transition metals are found in groups 3-11, while inner transition metals are in the bottom two rows. The reactivity of these metals varies, affecting how they are isolated from ores.

In the periodic table, the metals are generally located on the left side and in the centre. Specifically, representative metals are located on the left side of the table, while transition metals and inner transition metals can be found in the middle. The elements boron, silicon, germanium, arsenic, antimony, and tellurium, known as metalloids or semimetals, act as a divider between metals and nonmetals.

Transition metals are further differentiated as they are located in groups 3-11 of the periodic table and are characterized by their partially filled d orbitals. The inner transition metals are located in the two rows at the bottom of the periodic table, below group 3.

The reactivity of these metal groups varies, from the highly active metals such as scandium and iron, to almost inert elements, like platinum. This variety in reactivity determines the methods used to isolate the elements from their ores, with more active metals being more difficult to reduce.

https://brainly.com/question/28494476

#SPJ3

I hope this helps you!

Answer:

[tex]a=\frac{F}{m}[/tex]

[tex]a=\frac{v-u}{t}\\a=2\frac{s-ut}{t^2}\\a=\frac{v^2-u^2}{2s}[/tex]

Explanation:

The most common formula from which acceleration of an object can be determined is

F = ma

Where,

F = Force

m = Mass

a = Acceleration

Rearranging the equation we get

[tex]\mathbf{a=\frac{F}{m}}[/tex]

There are equations also from which acceleration can be determined they are

[tex]v=u+at\quad\\s=ut+{\tfrac {1}{2}}at^{2}\\v^{2}=u^{2}+2as[/tex]

Rearranging the equations we get

[tex]\mathbf{a=\frac{v-u}{t}}[/tex]

[tex]\mathbf{a=2\frac{s-ut}{t^2}}[/tex]

[tex]\mathbf{a=\frac{v^2-u^2}{2s}}[/tex]

Where,

a = Acceleration

u = Initial velocity

v = Final velocity

s = Displacement

t = Time taken

The answer to this would be plastic. The other options are conductors. Remember, metal is a conductor as well as the salt ions in salt water.

In order to calculate the voltage difference in the circuit, we need to look at the equation: V=IR.

In the equation:

V= Voltage

I= Current

R= Resistance.

Assuming we know this, We will plug it into an equation to find our voltage.

V=(.50a)x(24Ω)

If we solve for V, Your final answer will be: 12v (or 12 volts)

The voltage difference in a circuit that has the given resistance and current is 12 Volts.

Given the data in the question;

We know that; current is the ratio of potential difference and resistance.

It is expressed as:

[tex]I = \frac{V}{R}[/tex]

We substitute our given values into the equation and solve for the voltage

[tex]0.50A = \frac{V}{24ohms}\\\\V = 0.50A \ *\ 24ohms\\\\V = 12Volts[/tex]

Therefore,  the voltage difference in a circuit that has the given resistance and current is 12 Volts.

Learn more: https://brainly.com/question/22575811

The answer is:

All the above

The explanation:

The volume and the temperature and the number of particles will affect the pressure of an enclosed gas.

because according to boyle's law when the temperature constant so the pressure and volume of a gas have an inverse relationship, when temperature is constant.

when:

PV = nRT

when p is the pressure

V is the volume

n is number of moles

T is temperature

from this law we can know that there is a relation  between P and V and when n has a relation with the number of particles so:

volume , temperature and number of particles affect the pressure of an enclosed gas.

Final answer:

The pressure of an enclosed gas can be affected by the volume of the container, the temperature of the gas, and the amount of gas within the container.

Explanation:

The pressure of an enclosed gas is affected by various factors including volume, temperature, and the amount of gas. When the volume of a gas container is decreased, there is less space for the gas molecules to move around, resulting in more frequent collisions with the container walls and an increase in pressure. This relationship is an example of Boyle's law. Conversely, increasing the volume will decrease the pressure. Additionally, raising the temperature of the gas increases the kinetic energy of the molecules, leading to more frequent and forceful collisions with the walls, thus increasing the pressure. Lastly, adding more gas molecules to the container, while keeping the volume and temperature constant, will also increase the pressure because there are more molecules to collide with the container walls per unit time.

when a marble started from rest we can say that

initial velocity of the marble is

[tex]v_i = 0[/tex]

now it took t = 1.4 s to cover total distance of 54 cm by the marble.

so here we will have use kinematics equation in order to find the acceleration of the marble

so we can use

[tex]d = v_i* t + \frac{1}{2}at^2[/tex]

d = 54 cm = 0.54 m

we will plug in all data

[tex]0.54 = 0 * 1.4 + \frac{1}{2}*a * 1.4^2[/tex]

[tex]0.54 = 0 + 0.98*a[/tex]

[tex]a = \frac{0.54}{0.98}[/tex]

[tex]a = 0.55 m/s^2[/tex]

so the acceleration of the marble will be 0.55 m/s^2 on the given ramp

Answer: Option A

Explanation: In an elastic collision, the two objects only will have the same velocity after the collision if the had it before.

Now, in an inelastic collision the kinetic energy is not conserved, so there is a chance that the two objects that started with a different velocity end with the same, and that case is called "Perfectly inelastic" it occurs when the maximum kinetic energy is absorbed, and both objects "stick" to each other and move together as one, so the correct option is option A.

A scientist treats a cell with a chemical that destroys the chloroplast. As a result, photosynthesis will be stopped.

It is defined as a process by which plants and other photosynthetic organisms convert the light energy in to chemical energy  through the process of cellular respiration.

Some of the energy which is converted  is stored in molecules of carbohydrates like sugar and starches  which are made up of from carbon dioxide and water . Photosynthetic organisms which can perform photosynthesis  are algae and cyanobacteria. Photosynthesis is largely responsible for producing and maintaining the content of oxygen in earth's atmosphere.

The process begins with proteins absorbing light energy  which are called reaction centers and contain a green pigment which is called chlorophyll . In plants ,these pigments are present inside organelles called chloroplasts while in bacteria they are present in plasma membrane.

Learn more about photosynthesis,here:

https://brainly.com/question/26494694

#SPJ2

The answer is (C) as

[tex]C (s) + O_2 (g)[/tex] → [tex]CO_2[/tex]

It is commonly known that oxygen has the importance in the combustion reaction and in the absence of this molecule, the no combustion reaction will proceed. SO, for the combustion reaction, it is important that oxygen must be present in the reactant side of the equation than on the product side. Another identity is also present in the combustion reaction as carbon dioxide and water will be present in the product side. In the present options, the oxygen is only present in equation (C) in the reaction side.

So, the right option is

[tex]C (s) + O_2 (g)[/tex] → [tex]CO_2[/tex]

Final answer:

Option C, C (s) + O2 (g) → CO2 (g), is the combustion reaction, which involves the burning of carbon in the presence of oxygen to form carbon dioxide gas.

Explanation:

The student is asking to identify which of the given options is a combustion reaction. A combustion reaction typically involves a substance (usually carbon-based) combusting in the presence of oxygen to form carbon dioxide and water, releasing heat in the process. Among the options given, C. C (s) + O2 (g) → CO2 (g) represents the combustion of carbon (in the form of graphite or diamond), which reacts with oxygen to form carbon dioxide gas. This is a standard example of a combustion reaction.

It's important to note that the other reactions listed, such as combining hydrogen and chlorine to make hydrochloric acid (A), sodium and chlorine to make sodium chloride (B), and the decomposition of calcium carbonate to form calcium oxide and oxygen gas (D), are not combustion reactions.

Now the vertical velocity of the ball thrown at an angle 10° is given as

Voy(initial vertical velocity)= 30m/s x sin 10

Voy(initial vertical velocity)= 5.2m/s

Now the ball is decelerating with an acceleration due to gravity equivalent to 9.8m/s^2.

Let Vy be the final velocity and that is equal to zero in this case.

Now

Vy= Voy- tx9.8

Where t is the time at which the vertical velocity becomes 0.

Substituting the values we get

0= 5.2-tx9.8

9.8t=5.2

t=0.53 secs

Answer:

at the top of the ball’s trajectory

Explanation:

If a car is travelling 70 m.p.h that means it is travelling 70 miles PER HOUR and since we want to know half an hour we can do

70mph divided by 2 =35m.p half hour so the car is travelling 35miles in half an hour

First write down all the known variables:

d = -1.1m

a = -9.8m/s^2

vi = 0m/s

t = ?

Now use the kinematic equation that relates all the variables:

d = vi*t + (1/2)at^2

(-1.1) = (0)t + (1/2)(-9.8)t^2

-1.1 = -4.9t^2

0.22445 = t^2

0.47s = t

It takes 0.47 seconds for the juice to reach the ground.

solution is written in attached image.

To find the acceleration of the blocks and the tension in the cable, we can use Newton's second law of motion and set up equations for the hanging mass and the block on the surface. Solving these equations will give us the values we need.

In order to find the acceleration of the blocks and the tension in the cable, we can use Newton's second law of motion which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration.

In this system, the force of gravity acting on the hanging mass mg pulls it downward, while the tension in the cable T pulls it upward. Since the system is frictionless, the acceleration of both blocks will be the same and can be represented as a.

Applying Newton's second law to each block, we can set up the following equations:

For the hanging mass: mg - T = ma

For the block on the surface: T = mR

where m is the mass of the hanging block, g is the acceleration due to gravity, a is the acceleration of the system, and R is the mass of the block on the surface.

Solving these equations simultaneously will give us the value of the acceleration and the tension in the cable.

Horizontal distance covered is given as

[tex]x = 22 m[/tex]

vertical distance climbed by is given as

[tex]y = 4.8 m[/tex]

now we need top find the angle made by the displacement vector with respect to horizontal

So here we will say that we can use trigonometry to find out the angle with horizontal

The formula is given as

[tex]tan\theta = \frac{opposite \: side}{adjacent \: side}[/tex]

here given that

opposite side = 4.8 m

adjacent side = 22 m

now we can plug in all data in above equation

[tex]tan\theta = \frac{4.8}{22}[/tex]

[tex]tan\theta = 0.22[/tex]

[tex]\theta = tan^{-1}0.22[/tex]

[tex]\theta = 12.3 degree[/tex]

so here the displacement will make 12.3 degree angle with horizontal

When you run in gym class and then climb a rope, the direction angle of your total displacement as measured from the horizontal can be calculated using the inverse tangent function. Given a horizontal displacement of 22m and a vertical displacement of 4.8m, the direction angle is approximately 12.42 degrees.

The direction angle of displacement denoted by Θ in this context, is calculated based on the horizontal and vertical components of your displacement. Since displacement in this scenario forms a right triangle with the horizontal displacement (22m) and vertical displacement (4.8m), we can calculate the angle using the inverse tangent function (also known as arctan or tan^-1).

So, Θ = arctan(vertical displacement/horizontal displacement) = arctan(4.8m / 22m) = 12.42 degrees.

The direction angle of your total displacement, as measured from the horizontal in this context is approximately 12.42 degrees.

https://brainly.com/question/30393114

#SPJ3

Friction in this case will act counter to the direction of the box's movement. The box moves left to right, so the force of friction acts in the opposite direction. (D)

Answer: Hello there!

first, we have two notions of the force of friction:

The force of friction is in the opposite direction of the motion direction.

It acts in the contact point between the objects.

Then if the box is moving from left to right, the friction force should point from right to left, and be in the bottom of the box (the contact point between the box and the floor).

The diagram that shows this is the D.

The correct answer is:

B. 2Na + Cl2 --> 2NaCl

In fact, this is the only reaction among the choices where the number of atoms of each element is conserved. In fact, we see that on the left we have 2 atoms of sodium and 2 atoms of chlorine, and on the right we have two molecules of NaCl, which means that we still have 2 atoms of sodium (Na) and 2 atoms of chlorine (Cl).

Sample A: Iodine

Sample B: Bromine

Sample C: Chlorine.

sound travels through air, not through vacuum = lack of air

A bell can be heard inside a sealed bell jar full of air because sound waves travel through the air, causing vibrations that reach the ear and are interpreted as sound.

The reason a bell can be heard when rung inside a sealed bell jar full of air is due to the ability of sound waves to travel through gases, like air. Sound waves are mechanical waves requiring a medium to propagate, and in the presence of air inside a bell jar, these waves can move by causing the air molecules to vibrate. This sets off a chain reaction of vibrating molecules that eventually reach your ear, translating into the sound you hear. In contrast, if the jar were to be evacuated, leaving a vacuum, there would be no medium for the sound waves to travel through, and the bell wouldn't be heard.

The bunch of stuff in the jar is a mixture. The different kinds of pieces aren't bound to each other, and they can be easily separated.

weight = mg

W on earth = 800N

mg = 800 N        

m(9.8 m/s²)= 800N

dividing 9.8 both sides

m=800/9.8          ( as g=9.8m/s² on earth)

m=81.63 kg

Now weight on Mars

w=mg

 =(81.63kg) ×(3.76m/s²)

w=306N

The astronaut's weight on Mars is approximately 306.53 N.

Weight is the measure of the force of gravity acting on an object. It is often expressed as newtons (N) or pounds (lbs). Although the words "weight" and "mass" are sometimes used interchangeably in everyday English, they are not the same thing.

We can use the following formula for calculating the weight of Astronuat:

Weight on Mars = Weight on Earth * (Gravity on Mars / Gravity on Earth)

Given:

Weight on Earth = 800 N

Gravity on Mars = 3.76 m/s²

Gravity on Earth = 9.8 m/s²

Weight on Mars = 800 N * (3.76 m/s² / 9.8 m/s²)

Weight on Mars ≈ 306.53 N

Therefore, the astronaut's weight on Mars is approximately 306.53 N.

Learn more about weight, here:

https://brainly.com/question/31659519

#SPJ6

The answer is Newton's First law of motion.

Answer:

Newton's First law of motion.

Explanation:

Newton's First law of motion -

Newton' s first law of motion , also called the law of inertia .

According to this law , when an object is at rest or at stationary position , stays at that position and when the object is at motion , continues to be at the motion unless and until some force is acted on it .

Hence , the correct law for the given statement of the question , is Newton's First law of motion .

Transformer is used to change the voltage from higher value to lower value

It is done by changing the number of coils in primary and secondary coils

The working equation is given as

[tex]\frac{V_s}{V_p} = \frac{N_s}{N_p}[/tex]

here we have

[tex]V_s[/tex] = Secondary coil voltage = 120 V

[tex]V_p[/tex] = Primary coil voltage = 240,000 V

[tex]N_s[/tex] = Turns in secondary coil

[tex]N_p[/tex] = Turns in primary coil

Now by using the equation above

[tex]\frac{120}{240,000} = \frac{N_s}{N_p}[/tex]

now we have

[tex]\frac{N_p}{N_s} = \frac{240,000}{120}[/tex]

[tex]\frac{N_p}{N_s} = 2000[/tex]

so the ratio must be 2000

2000:1 is the ratio of the number of turns in the primary coil to the secondary coil of a transformer that steps down the voltage from 240,000 V to 120 V.

The ratio of the number of turns in the primary coil ([tex]n_p[/tex]) to the secondary coil ([tex]n_s[/tex]) of a transformer is directly related to the input ([tex]V_p[/tex]) and output voltage ([tex]V_s[/tex]).

The formula to calculate this ratio is:

[tex](V_p / V_s) = (n_p / n_s)[/tex]

Given:

Using the formula:

[tex](240,000 V / 120 V) = (n_p / n_s)[/tex]

This simplifies to:

[tex]2000 = (n_p / n_s)[/tex]

Therefore, the ratio of the number of turns in the primary coil to the secondary coil is 2000:1.

Answer:

The object's final velocity is approximately \(17.15 \ m/s\) downward.

speed of the car at t = 10 s is given as 10 m/s

now at t = 30 s car comes to rest so v = 0

now in this velocity time graph we can say slope will show the acceleration of the car as we know that acceleration is rate of change in velocity

[tex]a = \frac{v_f - v_i}{\Delta t}[/tex]

as we know that

[tex]v_f = 0[/tex]

[tex]v_i = 10 m/s[/tex]

[tex]\Delta t = (30 - 10) = 20 s[/tex]

now from above formula

[tex]a = \frac{0 - 10}{20} = -0.5 m/s^2[/tex]

So slope of the graph will represent the acceleration of car which is 0.5 m/s^2

Actually the correct answer is going to be Linear, sloping downward.

Please mark Brainliest if this answer helped you.