Answer:
LKGC (Last Known Good Configuration)
Explanation:
Last Known Good Configuration will have saved all the critical data & information from the last time when Mike successfully rebooted his system. So if Mike accesses it he will get the system in same state as it was before he installed hard drive.
When troubleshooting your BranchCache configurations, what specific commands will allow you to verify that all your clients are using the same caching mode, caching is enabled, and the cache is not full? (Choose all that apply.)a. Get-BCStatusb. Get-BCDataCachec. Show-BCDataCached. netsh branchcache show status all
Netsh branchcache show status all commands will allow you to verify that all your clients are using the same caching mode, caching is enabled, and the cache is not full.
d. netsh branchcache show status all
Explanation:
In network BranchCache is basically called optimizing band width in wide area network. End user has to check whether BranchCache is enabled or not. BranchCache is normally done windows server side for web server or application server or cloud technology. Network administer has to monitor the bandwidth usage and take necessary steps.
Network administrator monitors each client request and checks cache and do alternate source of or content management. Network administrator or end user will know by right click on administrative temple, computer configuration.
While working alone at their constant rates computer X can process 240 files in 4 hours, and comp Y 240 files in 8 hrs. If all files processed by these comp. are the same size how long would it take the two comp. working at the same time at their respective constant rates , to process a total of 240 files?
A. 2hrs
B. 2hrs 20 min
C. 2hrs 40 min
D. 6hrs
E. 6hrs 20 min
Answer:
2hrs 40 min
Explanation:
Answer: c) 2hrs 40 min
Explanation:
Rate of working of Computer X is = 240 files/ (4 × 60min)
= 1 file / min
Rate of working of Computer Y is = 240files/ (8×60min)
= 0.5 file/min
The combined rate for computer X & Y is = 1 + 0.5 = 1.5 file/ mins.
Therefore, time taken to process 240 files is = 240/1.5
= 160mins
= 2hrs 40mins
emily loves her job as an executive recruiter for a large hospital located in Seattle, Washington. Part of Emily's job requires her to gather industry information, collaborate with partners, compare competitors, and tap into the knowledge of prospective employees, partners, and customers. Which of the following would Emily use to perform her job?
A. interactivity metics
B. Source code
C. Network effect
D. Collective intelligence
Answer:
D. Collective intelligence
Explanation:
Collective intelligence appears when people work together. It is derived from the collaboration, collective actions, and competition of many parties.
In Emily's job, she collaborate with partners, compare competitors and tap into the knowledge of prospective employees, partners, and customers. Thus, she performs collective intelligence.
A ____ is a key-dependent, one-way hash function that allows only specific recipients(symmetric key holders) to access the message digest.a. signature
b. fingerprintc. MAC
d. digest
Answer: (C) MAC
Explanation:
MAC is stand for the message authentication code and it is one of the key dependent hash function. Message authentication provide the data integrity and also the origin of data authentication.
It basically allow the specific recipients known as the holder of the symmetric key. The message authentication code uses the CBC (Cipher block chaining) mode for constructing the MAC algorithm and it also uses the block cipher for the conjunction by using the CBC operations.On the other hand, all the options are incorrect as they are not the key dependent hash function.
Therefore, Option (C) is correct.
A processor has many different sequential and combinational logic units. Somehow, the inputs for each of those units must be asserted in order to correctly execute an instruction. How does the processor determine those control signals?
Answer:
instruction cycle
Explanation:
The electronic circuitry within a computer that carries out the instructions of a computer program by performing operations specified by the instructions given is called a PROCESSOR or a CENTRAL PROCESSING UNIT(CPU).
A processor FETCHES instructions that is stored in memory that is to say fetch, involves retrieving infomation. After fetching, we have the DECODING, the processor decodes all programs to be executed and EXECUTE this instructions. THIS IS KNOWN AS THE INSTRUCTION CYCLE.
How many radio buttons from the following code can be selected at any given time?a.Home Addressb.Federal Expressc.UPS
3 radio buttons from the following code can be selected at any given time.
Explanation:
In any programming language end user prompts either checkbox or radio buttons.
Normally checkbox are used for end user to select true or false methods where return value will true if checkbox click or false, one or zero. It all depends how end user uses the checkbox in his or her programming languages.
Radio buttons are used to end user in the programming languages where to select one radio buttons out of given radio buttons.
Where each radio buttons are marked with own assigned values. Based upon user selecting the radio buttons return will be assigned value of selected radio button.
If select option is multiple, each category of radio button is placed in grouping.
Assume that processor refers to an object that provides a void method named process that takes no arguments. As it happens, the process method may throw one of several exceptions. Write some code that invokes the process method provided by the object associated with processor and arrange matters so that if process throws any exception, your code prints the message "process failure" to standard output and does nothing else in regard to the exception.
Answer:
Following are the code in the Java Programming Language:
try{ //try block.
processor.process(); // call the function through the object.
}
catch(Exception e){ //catch block .
System.out.println( "process failure"); //if any exception occurs then print.
}
Explanation:
In the following code, we set two blocks in Java Programming Language of the exception handling which is try block or catch block.
In try block we call the function "process()" through the "processor" object.If any exception occurs in the program then the catch block print the following message is "process failure"There are different types of information systems based on the different levels of hierarchy in an organization. Which one helps senior executives analyze information and come up with alternate actions and business strategies?
Answer:
EIS- Executive Information Systems
Explanation:
Executive information system is a decision support system that is used to assist executive in decision- making.They provide easy access to achieve strategic goals in organization.
Example:
Time series chartsscatter diagrams maps motion detectors sequence charts bar charts._______is a network of physical objects embedded with sensors, processors, software and network connectivity capability to enable them to exchange data with the manufacturer, operator and other connected devices
a. the internet of digital divide
b. the internet of regulations
c. the internet of things
d. the internet of data
Answer:
c. the internet of things
Explanation:
Internet of things stands for IoT devices. the objects or devices which can be connected on internet and control by any of networking device comes under IoT devices.
IoT device is a combination of sensors, devices, and network working together. there are many sensors i.e PIR sensor, temperature sensor, light sensor, etc. which collect the information and send it over the connected devices. when it gets command it also acts on the same command like a printer function.
The example and most recent usage of IoT devices in the lighting automation, where the lighting of a house or office gets connected to the internet and can be controlled by any device connected with it.
What are Boolean connectors? A. sites that connect you to more information on your topic B. databases that link your topic to available sources C. indexes on connective materials D. shortcuts to help you narrow the search field
Final answer:
Boolean connectors, or Boolean operators, are AND, OR, and NOT, used within databases and search engines to refine search results by combining or excluding keywords. The correct option is C. indexes on connective materials.
Explanation:
Boolean connectors, also known as Boolean operators, are tools used in search engines and databases to combine or exclude keywords to refine search results. The three basic Boolean operators are AND, OR, and NOT. For instance, using AND narrows your search by telling the database to include all specified search terms, OR expands your search to include any of the specified terms, and NOT excludes terms to eliminate irrelevant results. By becoming familiar with these operators, you can effectively focus your search and enhance the relevancy of the results. An example of such usage might be a search string like "artificial intelligence" AND "machine learning" NOT "video games" to find articles that discuss artificial intelligence and machine learning but exclude those that relate to video games.
If the task is to write firewall specifications for the preparation of a(n) ____, the planner would note that the deliverable is a specification document suitable for distribution to vendors.A. WBS B. RFPC. CBAD. SDLC
Answer:
RFP
Explanation:
It is the type of document that is used to ask vendors to propose the solutions of problem that are faced by customer. It is the abbreviation of "Request for Proposal". This proposal is processed though the bidding, to offer the services or submit business proposals by vendors.
When typing text in a word processing program, you should only press ____ after a short line (like a title), at the end of a paragraph, and to leave a blank line between paragraphs.
Answer:
Enter
Explanation:
In a Microsoft word when we are typing text and want to go to next line just put the cursor at the end of line or line text and then press enter.It will leave a blank line between paragraphs.
In word processing programs like Microsoft Word, the Enter key should only be pressed to end a paragraph, after a title, or to add a blank line. For spacing after a period, one space is the current standard. Indents and line spacing can be adjusted using specific formatting options in the word processor.
Explanation:When typing text in a word processing program, you should only press Enter after a short line (like a title), at the end of a paragraph, and to leave a blank line between paragraphs. This is because most word processing software, including Microsoft Word, automatically wraps text to the next line as you type. To create necessary white space and make your document more readable, adjusting the spacing before and after paragraphs can be done in the Page Layout tab. Additionally, if you require indenting paragraphs, this can be performed using the Paragraph group of the Layout tab, which allows precise control over indents and spacing.
Regarding the space after a period, it is widely accepted now to use a single space after a period at the end of a sentence. This conforms to modern style guides, such as the APA style, which currently requires a single space after a period. Remember that the "rules" for spacing and formatting may change, so it's important to stay up to date with the style guide you are using.
For specialized formatting like creating an ellipsis, remember to include a space between each dot and ensure it does not wrap to the next line. Likewise, if an ellipsis is used at the end of a sentence, it will appear after the period with a space in between.
Which of the following is true of computer-aided manufacturing? a. It shares information with the design computer. b. It is the science and technology of construction of robots. c. It simulates performance without the use of prototypes. d. It is equivalent to computer-aided design.
Answer:
Option C is correct.
Explanation:
Computer Aid Manufacturing, or CAM, implies the use of software and specialized machinery to automate the manufacturing process.
It needs 3 fundamental parts:
Software capable of instructing machinery in the process of creation.Machinery capable of turning raw material into the desired model.Post-processing, to transform the instruction given from software to a language the machine can understand.Once a company has a design, it will load it into the software to test any possible geometry errors that could impact the manufacturing process. This allows measuring performance without the need for prototypes, as the model can be represented inside a computer environment.
A forensic investigator at a crime lab is performing a forensic analysis of a hard drive that was brought in by state troopers. They make a mistake by using the wrong forensic tool during their forensics examination. What should the investigator do?
a. Document the mistake and workaround the problem.
b. Document the mistake and press on with remaining tasks.
c. Disclose the mistake and assess another area of the hard drive.
d. Disclose the mistake and preserve the chain of custody.
Answer:
a. Document the mistake and workaround the problem.
Explanation:
The forensic investigation is mainly used to collect and analyze the evidence of a crime, which helps in search of a suspect.
The forensic investigator's main purpose is to find the most important evidence by thorough workout on fingerprints, blood, computer, etc of a crime to help to find a suspect.
It is a detail inspection of the crime scenes which come into some result so that the correct decision should be made
So, according to the given options, the most appropriate one is option a.
Transaction processing systems are primarily used to automate business processes. Automation increases efficiency and effectiveness, while reducing head count which in turn reduces the overall operational ____________.
A.Costs
B. Systems
C. Revenues
D. Intelligence
Answer:
A.Costs
Explanation:
Transaction processing systems are used in business for operational support. This information system processes data as transactions usually in automated manner.
Automation causes efficiency and reduced human intervention, which will end up reduced operational costs.
Type the correct answer in the box. Spell all words correctly. How is it possible to access data from any location? Storing data on the enables access from any location.
Answer:
optical
Explanation:
The earliest of these was the magnetic device. Computer systems began with magnetic storage in the form of tapes (yes, just like a cassette or video tape). These graduated to the hard disk drive and then to a floppy disk.
Answer: cloud
Explanation: plato
Which statement is false?
a) Each type parameter list contains one or more type parameters, separated by commas.
b) A type parameter name must be unique among different generic methods.
c) The type parameters act as placeholders for the types of the arguments passed to a method.
d) The type parameter names throughout the method declaration must match those declared in the type parameter list.
Answer:
b) A type parameter name must be unique among different generic methods.
Explanation:
These statements are true
Each type parameter list contains one or more type parameters, separated by commas.
The type parameters act as placeholders for the types of the arguments passed to a method.
The type parameter names throughout the method declaration must match those declared in the type parameter list.
But
A type parameter name may be different among different generic methods.
The Internet has allowed media companies to synergize their content, broadcasting the same ideas and products across multiple platforms thus significantly reducing relative _____ because the Internet’s marginal costs are minimal.
Answer:
First copy cost is the correct answer for the given question.
Explanation:
Because the cost of the first copy is less and they are a high-quality product and is also a similar copy of the original copy with features.
Duplicate copies have less in cost but their qualities are not better than that first copies because they are the coy of the original ones but the margin is higher in the duplicate copies.
In simple words, first copies have look similar to the original ones but their quality is cheaper and their production cost and selling costs are also cheap as compared to the original ones.
Identify a characteristic of electronic meeting systems.
a. Real-time computer conferencing has advanced video capability.
b. Desktop conferencing enables participants to have multiple video windows open at one time.
c. Video teleconferencing does not require skilled labor as the equipment involved is easy to use.
d. Video teleconferencing enables participants to share text and graphics.
Answer:
The correct answer to the following question is an option (b).
Explanation:
Desktop conferencing is the feature of the electronic meeting system.
An EMS or electronic meeting system is an application that gives us the facilities of problem-solving and making decisions for that problem within a group, and it also provides the best feature of web conferencing, and the desktop conferencing by which we can chat and tells our problem in the group or a person.
You are a network administrator. Your company recently approved of employees working from home one day a week and the use of employee-owned mobile devices at work. You want to ensure that employees follow wireless security best practices. What is your most important first step?
Answer:
To establish the BYOD policy is the correct answer to the following question.
Explanation:
Implementation of the BYOD(Bring Your Own Device):
Firstly, set you objectives and establish it.Then, you have to decide and tell your employees that what types of devices are only allowed in your organization.Then, establish your security policies related to the BYOD policy.Then, give good training by you or by the IT professionals to your employees.Finally, if the employee are leaving your organization then, you have to remove those employees from the BYOD policy by which they cannot access your company's informations.// This program uses a bubble sort to arrange an array of integers in // ascending order // PLACE YOUR NAME HERE #include using namespace std; // function prototypes void bubbleSortArray(int[], int); void displayArray(int[], int); const int SIZE = 5; int main() { int values[SIZE] = { 9, 2, 0, 11, 5 }; cout << "The values before the bubble sort is performed are:" << endl; displayArray(values, SIZE); bubbleSortArray(values, SIZE); cout << "The values after the bubble sort is performed are:" << endl; displayArray(values, SIZE); return 0; } //****************************************************************** // displayArray // // task: to print the array // data in: the array to be printed, the array size // data out: none // //******************************************************************
Answer:
i dont get it; what are we supposed to do here
Explanation:
The AVERAGE function requires that the argument be included within parentheses following the function name.A. TrueB. False
Answer:
The answer to the given question is "True".
Explanation:
The description of the average function can be given as:
The AVERAGE function is a part of the spreadsheet. This Function turns backs the value on average.In the average function we can handle up to 255 unique parameters, that can be treated in the standard function.This function is made up of numbers, cell links, lengths, lists, and constants.That's why the answer to this question is "True".
A person registers a domain name, relinquishes it in less than five days, and then gets the same name again. She repeats this cycle over and over again. What term describes this practice?
a. DNS spoofing
b. DNS jacking
c. DNS pilfering
d. DNS kiting
Answer:
d. DNS kiting
Explanation:
Domain kiting can be defined as the process by which a person removes a domain name during the grace period or trial period (Free) of five days and immediately register it again for another period of five days. The individual can then repeat this process indefinitely, so it is basically possible for him/her to have the domain registered without paying.
Somebody who is good at this stuff, please halp meh ;-;
Answer:
for the first question the correct answer is either A or B
the second problem is A
hope this helps you!
(p.s;tell me if this is right and please mark me as brainlyest)
Explanation:
Ask me if you want/need the explaination.
Two non-negative integers x and y are equal if either: Both are 0, or x-1 and y-1 are equal Write a boolean-method named equals that recursively determines whether its two int parameters are equal and returns true if they are and false otherwise.
Answer:
Following are the code which is mention below.
bool equals (int x, int y) // method equals
{
if( (x<0) || (y<0) ) // check number if it is less then 0
return false; // return false
if( (x==0) && (y==0) ) // check condition if number is equal to 0
return true; // return true
return equals(x-1, y-1);
}
Explanation:
Here we declared a function "equals" of type bool which means it either return "true" or "false".Inside the function equals we check the condition which are mention above1. if x and y both are less then 0 then it returns "false".
2. if x and y both are equal to 0 then it returns "true"
3. Otherwise it return x-1 and y-1.
Assume that you declare a variable as int x = 100, and correctly pass it to a method with the declaration private static void IncreaseValue(int x). There is a single statement within the IncreaseValue() method: x = x + 25;. Back in the Main() method, after the method call, what is the value of x?
Answer:
The value of X after the method call is 125
Explanation:
Recall that x was assigned the value 100. this value (100) was passed as an argument to the method IncreaseValue() which adds 25 to x that was initially 100.
Please select the word from the list that best fits the definition
Contain offensive language or content
A.Safe Sites
B.Unsafe Sites
Answer:
B. Unsafe Sites
Explanation:
Unsafe Sites are not safe and contain content which may be offensive and which could also be harmful for younger children.
The correct word from the list that best fits the definition is: Contain offensive language or content of unsafe sites. the correct option is B.
What are unsafe sites?Cybercriminals create malicious websites to steal data and spread viruses like ransomware. These websites frequently pose as trustworthy ones and entice users with phishing emails.
Employees can be prevented from exposing themselves and your firm to losses through security measures and awareness training. These risky websites frequently resemble trustworthy websites, and simply visiting a malicious website might lead to an attack on your computer.
It's possible that you'll be asked to download software that your computer seems to need. Your machine and your private data may be compromised by a dangerous installation.
Therefore, the correct option is B. Unsafe Sites.
To learn more about unsafe sites, visit here:
https://brainly.com/question/15613340
#SPJ2
You are part of a testing team at a software business. Your job is to see how many concurrent users the system can host and how many database transactions the system can handle without a noticeable drop in performance. You are doing _____ testing.
Answer: volume testing
Explanation:
Volume testing is a non-functional test that looks into the performance of a software or database whenn handling a particular amount of data. It can be used to determine how much data or users a database or software can handle without a substantial change in the performance.
Lisa mentions that a program is developed to interact with other programs, and she wants to begin by testing the programs individually. Tina tells her about a process in which a programmer simulates each program outcome or result and displays a message to indicate whether or not the program executed successfully. What is the name of this process?
QC TESTER(quality testing process) is the name of this process.
To name this process call QC TESTER
Explanation:
Any software development environment their will QC testing (quality testing process) where end user will do or simulate complete testing of software make the software bug free.
After QC tester confirm the program as bug free then only software implementation team ready for implementation process. QC tester is important role in software development environment to find a bug on function, data input entry and monitor result from software and inform to software team with list of bug results.
This process will take place to and from between QC tester and software developer team till software become bug free.
A local university contracted with IBM to implement a new database system, which the university would then administer and run. This is an example of what type of outsourcing? Application Personnel Process-based Consultant Project-based
Answer:
The correct answer is Consultant Project Based
Explanation:
Outsourcing is hiring some company to execute tasks previously executed by the company itself.
This is a consultancy contract for the specified project as the services needed from the vendor IBM in this cases are designing of a database system. Once it's designed it would be administered and run by the university without the need of IBM. So we can say it's a consultant project based outsourcing