On a dry day, just after washing your hair to remove natural oils and drying it thoroughly, run a plastic comb through it. Small bits of paper will be attracted to the comb. Explain why.

Answers

Answer 1
When the surface of the comb rubs on your hair, the comb is electrically charged. When the comb comes close to the paper, the charge on the comb causes charge separation on the paper bits. Since paper is neutral, positive and negative charges are equivalent. The charge on the comb charges the area of the bit of paper nearest the comb to the opposite. Thus, the bits of paper become attracted to the comb.
Answer 2

Final answer:

A plastic comb can attract small bits of paper due to the electrostatic charge created by friction. This effect is reduced in moist air as humidity conducts the charge away.

Explanation:

When a plastic comb is run through hair, it can attract small bits of paper. This is due to the electrostatic charge that is created by friction when the comb is dragged against the hair. The comb becomes negatively charged as electrons are transferred from the hair to the comb, resulting in an electrostatic force that can attract neutral objects, such as pieces of paper.

If you repeat the experiment in a moist environment, such as a bathroom after a shower, you may observe that the electrostatic effect is reduced. This is because water molecules in the air increase the humidity, which conducts the charge away, thereby neutralizing the electrostatic effect more rapidly than in dry air.

Torn paper may be more effective than cut paper because the tearing process can create more irregularities and protrusions on the edges of the paper, providing more opportunities for the electric force to act upon these points compared to the relatively smooth edges of cut paper.


Related Questions

A relatively long lived excited state of an atom has a lifetime of 2.05 ms. what is the minimum uncertainty (in ev) in its energy?

Answers

We can solve the exercise by using Heisenberg's principle. In its energy-time version, Heisenberg principle states that the product between the uncertainty on the energy and on the time is larger than:
[tex]\Delta E \Delta t \ \textgreater \ \frac{h}{4 \pi} [/tex] (1)
where [tex]\Delta E, \Delta t[/tex] are the uncertainties on the energy and on the time, and h is the Planck constant.

The lifetime of the particle is 2.05 ms, so we can assume the maximum uncertainty on the time corresponds to the lifetime itself:
[tex]\Delta t = 2.05 ms = 2.05 \cdot 10^{-3} s[/tex]
And so the minimum uncertainty on the energy can be found by using (1):
[tex]\Delta E \ \textgreater \ \frac{h}{4 \pi \Delta t}= \frac{6.6 \cdot 10^{-34} Js}{4 \pi (2.05 \cdot 10^{-3} s)}= 2.56 \cdot 10^{-32} J[/tex]

Keeping in mind that [tex]1 eV = 1.6 \cdot 10^{-19}J[/tex], we can convert the energy uncertainty into electronvolts:
[tex]\Delta E = 2.56 \cdot 10^{-32} J : 1,6 \cdot 10^{-19} J/eV = 1,6 \cdot 10^{-13} eV[/tex]


Acceleration is best defined as the rate of change of ________ of an object.

Answers

Acceleration is best defined as the rate of change of ________ of an object.            ANSWER: velocity!

Answer:

Velocity

Explanation:

Remember that acceleration is given by the next formula:

Acceleration: Vf-Vo/Time

Where Vf final velocity and Vo is initial velocity, so acceleration of an object is best defined as the change in velocity the an object experiences in a certain period of time, it is often described in M/s^2 and those are the units in the international system.

A parallel circuit has two 8.0-ohm resistors and a power source of 9.0 volts. If a 12.5-ohm resistor is added to the circuit in parallel, how will the current be affected and what value will it have?

Answers

The initial equivalent resistance of the circuit is
[tex] \frac{1}{R_{eq}}= \frac{1}{R_1}+ \frac{1}{R_2}= \frac{1}{8 \Omega}+ \frac{1}{8 \Omega} = \frac{1}{4 \Omega} [/tex]
which means 
[tex]R_{eq}= 4 \Omega[/tex]
Therefore the initial current in the circuit is
[tex]I= \frac{V}{R}= \frac{9 V}{4 \Omega}=2.25 A [/tex]

When the new resistor of [tex]12.5 \Omega[/tex] is added to the circuit in parallel, the new equivalent resistance of the circuit is
[tex] \frac{1}{R_{eq}} = \frac{1}{8 \Omega} + \frac{1}{8 \Omega}+ \frac{1}{12.5 \Omega}= 0.33 \Omega^{-1}[/tex]
from which we find
[tex]R_{eq}=3 \Omega[/tex]
This means that the equivalent resistance of the circuit has decreased, and the new current is
[tex]I= \frac{V}{R_{eq}}= \frac{9 V}{3 \Omega}=3 A [/tex]
which means that the current in the circuit has increased.

Answer:

1/R1 + 1/R2 + ... = 1/Re

So...

1/17.2 + 1/22.4 = 1/Re

0.1021 = 1/Re

Re = 9.792 Ohms

Now use the Voltage equation V = IR

6 = I * 9.792

I = 6/9.792 = 0.613 Amps.Pato 0.61

Explanation:

Jupiter _____.

may have prevented asteroids from forming a planet
has a large gravitational field which can capture small comets
is responsible for creating most known meteors and meteoroids
releases radiation which warms comets and creates a comet tail

Answers

It's a because i chose this and got it right

Answer:

Jupiter may have prevented asteroids from forming a planet

Explanation:

What is the wavelength λ of light in glass, if its wavelength in air is λ0, its speed in air is c, and its speed in the glass is v? express your answer in terms of λ0, c, and v?

Answers

When an electromagnetic wave moves from a medium to another medium, its frequency remains constant. In this problem, we have light (which is an electromagnetic wave) moving from air to glass (or vice-versa), so we can write
[tex]f_0 = f[/tex] (1)
where [tex]f_0[/tex] is the frequency of the light in air, while f is the frequency in glass.

Using the relationship between frequency, wavelenght and speed of a wave, we have
[tex]f= \frac{v}{\lambda} [/tex]
where v is the speed of light in glass and [tex]\lambda[/tex] the wavelength in glass, and
[tex]f_0 = \frac{c}{\lambda_0} [/tex]
where c is the speed of light in air and [tex]\lambda_0[/tex] the wavelength in air. Using these two relationships, we can rewrite eq.(1) as
[tex] \frac{c}{\lambda_0}= \frac{v}{\lambda} [/tex]
and by re-arranging it, we find
[tex]\lambda= \frac{v}{c} \lambda_0 [/tex]

The wavelength λ of light in glass, if its wavelength in air is λ0, its speed in air is c, and its speed in the glass is v will be

[tex]\lambda=\dfrac{v}{c}\lambda_o[/tex]

What is wavelength?

The wavelength of any wave is defined as the distance between two max adjacent amplitudes, or the distance between two successive troughs or crest.

When an electromagnetic wave moves from a medium to another medium, its frequency remains constant. In this problem, we have light (which is an electromagnetic wave) moving from air to glass (or vice-versa), so we can write

[tex]f_o=f(1)[/tex] (1)

where  is the frequency of the light in air, while f is the frequency in glass.

Using the relationship between frequency, wavelenght and speed of a wave, we have

[tex]f=\dfrac{v}{\lambda}[/tex]

where v is the speed of light in glass and  the wavelength in glass, and

[tex]f_o=\dfrac{c}{\lambda_o}[/tex]

where c is the speed of light in air and  the wavelength in air. Using these two relationships, we can rewrite eq.(1) as

[tex]\dfrac{c}{\lambda_o}=\dfrac{v}{\lambda}[/tex]

and by re-arranging it, we find

[tex]\lambda=\dfrac{v}{c} \lambda_o[/tex]

Hence the wavelength λ of light in glass, if its wavelength in air is λ0, its speed in air is c, and its speed in the glass is v will be

[tex]\lambda=\dfrac{v}{c}\lambda_o[/tex]

To know more about Wavelength follow

https://brainly.com/question/10728818

A particle is attached to a spring and is pushed so that the spring is compressed more and more. As a result, the spring exerts a greater and greater force on the particle. Similarly, a charged particle experiences a greater and greater force when pushed closer and closer to another particle that is fixed in position and has a charge of the same polarity. In spite of the similarity, the charged particle will not exhibit simple harmonic motion on being released, as will the particle on the spring. Explain why not.

Answers

In order for particles to perform a simple harmonic motion, we must follow the law of force of the form F = -kx, where x is the displacement of the object from the equilibrium position and k is the spring constant. The force shown in F = -kx is always the restoring force in the sense that the particles are pulled towards the equilibrium position.

The repulsive force felt when the charge q1 is pushed into another charge q2 of the same polarity is given by Coulomb's law
                                F = k *q1* q2 / r^2.
It is clear that Coulomb's law is an inverse-square relationship. It does not have the same mathematical form as the equation F = -kx. Thus, charged particles pushed towards another fixed charged particle of the same fixed polarity do not show a simple harmonic motion when released. Coulomb's law does not describe restoring force. When q1 is released, it just fly away from q2 and never returns.

What is the wavelength of a photon whose energy is twice that of a photon with a 622 nm wavelength?

Answers

The frequency of the [tex]\lambda_2 = 622 nm = 622 \cdot 10^{-9} m[/tex] wavelength photon is given by
[tex]f_2 = \frac{c}{\lambda_2}= \frac{3 \cdot 10^8 m/s}{622 \cdot 10^{-9} m}=4.82 \cdot 10^{14} Hz [/tex]
where c is the speed of light.

The energy of this photon is
[tex]E_2=hf_2 = (6.6 \cdot 10^{-34}Js)(4.82 \cdot 10^{14}Hz)=3.18 \cdot 10^{-19} J[/tex]
where h is the Planck constant.

The energy of the first photon is twice that of the second photon, so
[tex]E_1 = 2 E_2 = 2 \cdot 3.18 \cdot 10^{-19}J =6.36 \cdot 10^{-19} J[/tex]

And so now by using again the relationship betwen energy and frequency, we can find the frequency of the first photon:
[tex]f_1 = \frac{E_1}{h}= \frac{6.36 \cdot 10^{-19} J}{6.6 \cdot 10^{-34}Js}=9.64 \cdot 10^{14}Hz [/tex]

and its wavelength is
[tex]\lambda_1 = \frac{c}{f_1}= \frac{3 \cdot 10^8 m/s}{9.64 \cdot 10^{14}Hz} =3.11 \cdot 10^{-7}m = 311 nm [/tex]
So, we see that the wavelength of the first photon is exactly half of the wavelength of the second photon (622 nm).

Allison wants to calculate the speed of a sound wave. Which formula should she use?
distance traveled / amplitude
number of wavelengths / amplitude
number of wavelengths / time
distance traveled / time

Answers

the true answer is distance traveled / time
because the speed of propagation of sound wave formula is the quotient of the distance traveled by a sound shaking by the time required on arrival. on edguinuity 

Answer:

Option 4th is correct

distance traveled / time

Explanation:

Allison wants to calculate the speed of a sound wave.

The speed of the sound wave is the distance traveled divided by the time.

[tex]v = \dfrac{d}{t}[/tex]

Where, v = speed of sound

d = distance

t= time

Therefore, The formula should she use is, distance traveled / time

According to the Doppler affect what happens when a light surfaceMoves further away from an observer

Answers

The correct answer is The electromagnetic waves appear more in red color.
Since red is at the low-frequency end of the visible spectrum, we say that light from a receding star is shifted toward red, or redshifted.
Hello User


Answer: A

I hope I helped
-Chris

Which of these statements would best explain the problem encountered with nuclear waste disposal?

Answers

A) The isotopes have a long half-life and only remain radioactive for a long time period. 

Answer: A

Explanation:

Two astronauts are playing catch with a ball in space. The first astronaut throws the ball; and A) the ball moves, but the astronaut doesn’t. B) the ball moves, and so does the astronaut. C) the ball doesn’t move, but the astronaut does. D) the ball doesn’t move, and neither does the astronaut.

Answers

B) the ball moves, and so does the astronaut.

 Two astronauts are playing catch with a ball in space. The first astronaut throws the ball, and the ball moves, and so does the astronaut because of the action-reaction law. When the ball goes forward, the astronaut goes backward.

plz give me the brainliest

Two astronauts are playing catch with a ball in the space. One astronaut throws the ball, then the ball moves, and so does the astronaut. Hence, option B is correct.

What is Newton's third law?

Newton's third law states that if two bodies meet, they exert forces on each other that are comparable in size and directed in the opposite direction.

Action and reaction law is another name for the third law. This law is critical in understanding issues involving static equilibrium, in which all the forces are in balance, but it also holds true for entities moving uniformly or quickly.

A game of catch is being played in space by two astronauts. A ball is thrown by the first astronaut, and thanks to the action-reaction rule, both the ball and the astronaut move. The astronaut is forced to move backwards as the ball advances.

To know more about Newton's third law:

https://brainly.com/question/23772134

#SPJ2

Physics 1315, what is faster speed; red light or gamma rays?

Answers

They travel at the same rate of speed

To what potential should you charge a 3.0 μf capacitor to store 1.0 j of energy?

Answers

The energy stored in a capacitor is given by:
[tex]U= \frac{1}{2}CV^2 [/tex]
where
U is the energy
C is the capacitance
V is the potential difference

The capacitor in this problem has capacitance
[tex]C=3.0 \mu F = 3.0 \cdot 10^{-6} F[/tex]
So if we re-arrange the previous equation, we can calculate the potential V that should be applied to the capacitor to store U=1.0 J of energy on it:
[tex]V= \sqrt{ \frac{2U}{C} }= \sqrt{ \frac{2 \cdot 1.0 J}{3.0 \cdot 10^{-6}F} }=816 V [/tex]

To store 1.0 J of energy in a 3.0 μF capacitor, you should charge it to approximately 816.5 V.

To determine the potential (V) needed to charge a 3.0 μF capacitor to store 1.0 J of energy, we can use the formula for the energy stored in a capacitor:

Energy (E) = 0.5 × C × V²

Where:

E is the energy stored (1.0 J in this case)C is the capacitance (3.0 μF or 3.0 × 10⁻⁶F)V is the potential difference we need to find

Rearranging the formula to solve for V:

V² = (2E)/C

Substituting the given values:

V² = (2 × 1.0 J) / (3.0 × 10⁻⁶ F)

V² = 2.0 J / 3.0 × 10⁻⁶ F

V² = 666666.67 V²

Taking the square root of both sides:

V ≈ 816.5 V

Therefore, you should charge the 3.0 μF capacitor to approximately 816.5 V to store 1.0 J of energy.

I need help finding the answer:
When a guitar string plays the note "A", the string vibrates at 440 Hz. What is the period of the vibration?

Answers

The formula applicable:

Period, T = 1/f --- Where T = period (s), and f = frequency (Hz).

Substituting by use of the values of frequency given in the current scenario,

T = 1/440 = 2.27*10^-3 seconds
Final answer:

The period of the guitar string's vibration when it plays the note 'A' is approximately 0.00227 seconds.

Explanation:

In physics, the period of vibration refers to the time it takes for a single complete cycle of vibration to occur. It is usually represented by the symbol T and is measured in seconds. To find the period of the guitar string's vibration, you can use the formula T = 1/f, where f is the frequency of the vibration.

In this case, the frequency of the guitar string playing the note 'A' is given as 440 Hz. So, the period can be calculated as T = 1/440 = 0.00227 seconds.

Therefore, the period of the guitar string's vibration when it plays the note 'A' is approximately 0.00227 seconds.

Learn more about Period of vibration here:

https://brainly.com/question/31830004

#SPJ3

a 10.0 kg ball falling at 10.0 m/s hits a mattress and comes to a complete stop in 1 s. what force does the mattress exert to stop the ball

Answers

Using Newton's second law;

F = ma, where m = mass, a = acceleration or deceleration

a = Δv/t = (v-u)/t, but v= 0, u = 10 m/s, t = 1.
Then,
a = (0-10)1 = -10 m/s^2

Substituting;
F = ma = 10*-10 = -100 N

The  mattress exerts 100 N to stop the ball.

What keeps an inflated balloon from falling down if you rub it against your hair and place it against a wall? 1. rubbing distorts the atoms inside the ballon and polarizes it. 2. rubbing leaves a balloon electrically charged; the charged balloon polarizes the wall. 3. when you rub the balloon against your hair, it will remove some m?

Answers

The answer is: rubbing leaves a balloon electrically charged; the charge polarizes the wall

there is no friction here

A balloon sticks to a wall after being rubbed on your hair because the friction causes electrons to move from your hair to the balloon, giving it a negative charge that attracts to the slightly positively charged surface.

When you rub a balloon against your hair, the balloon becomes electrically charged due to the transfer of electrons. This process is known as the triboelectric effect, where friction causes electrons to be transferred from your hair to the balloon. As a result, the balloon holds a negative charge while your hair holds a positive charge.

Due to this, the charged balloon can polarize the wall's molecules, causing the opposite charges to attract, which keeps the balloon stuck to the wall temporarily.

The potential energy due to the strong interaction, between two quarks or a quarkantiquark pair, goes something like v (r) = −α/r + βr, where α and β are positive constants. is there any point rv where the potential energy goes to zero? is there any point

Answers

Given that 
V= x/r + Br.
If V=0 Then -x/r + Br = 0
→ -x + br²/r = 0
→Br² - x = 0
r² = x/B
r² = +₋ √x/B
Force = dv/dr = d/dr [ -x/r +Br]
F = -[ -x/-r² + B]
= [B +x/r²]
a,B are positive.
r² is constant and it can never be negative.
∴ [ B + x/r²] is a positive value.
V = 0 at r = ⁺₋√x/B for the value of r.

How can medical assistant use the knowledge of the nervous systems to care for the patient with Parkinson’s and other neurological disorders

Answers

Having a wide knowledge of the nervous system and the of how the brain’s different parts collaborate to organize all our movements, senses thoughts, and emotions enable the medical assistants to handle the cognitive and behavioral complications in the patient. It helps them to deal with wounds and falls since the nervous disorder generally affects cognition and movement. Having a wide knowledge of how the nerve impulses are transmitted from the nervous system to the brain, when it is then converted into feelings such as pleasure, pain, cold or hot, the medical assistant will be able to take response immediately on the patient prior they start complaining of sensory indications, such as discomfort, irritating, and unresponsiveness.

A silver wire has a cross sectional area a = 2.0 mm2. a total of 9.4 × 1018 electrons pass through the wire in 3.0 s. the conduction electron density in silver is 5.8 × 1028 electrons/m3 and e = 1.60 × 10-19
c. what is the drift velocity of these electrons?

Answers

Final answer:

The drift velocity of electrons in a silver wire given an electron density of 5.8 x 10^28 electrons/m3, a cross-sectional area of 2.0 mm2, and a total of 9.4 x 10^18 electrons passing through in 3.0 s, is approximately 1.08 x 10^-4 m/s.

Explanation:

The drift velocity of electrons is a term used in physics to describe the average velocity that free charges such as electrons traverse in a material due to an externally applied electric field. Given the cross-sectional area (A), the number of electrons (Q), the time (t), the charge of an electron (e), and the electron density (n), you can determine the drift velocity (v) using the formula:

v = Q / (n * A * t)

Firstly, convert the cross-sectional area to m² since the electron density is given in 1/m³. So, the area would be 2.0 mm² = 2.0 x 10^-6 m².

To determine the number of electrons passing through during the given time period (3.0 s), we substitute what we know into the formula giving:

v = (9.4 x 10^18) / (5.8 x 10^28 x 2.0 x 10^-6 x 3.0)

This yields a drift velocity of 1.08 x 10^-4 m/s.

Learn more about Drift Velocity here:

https://brainly.com/question/38343742

#SPJ12

Why are conductors and insulators both required to construct the electrical wiring in our home

Answers

Conductors are materials with many free electrons, so they allow electrical current to flow through them. Therefore, conductors are required in order to bring electricity to every room of the house.

Insulators, instead, are materials with few or no free electrons, so electrical currents do not flow through them. In the electrical wiring of the houses, they are used in order to isolate the conductive elements of the wire from other conductive materials (in fact, if the conductive elements touch other conductive elements of the house, part of the current would be dissipated)

What method of forecasting uses the effects of past weather conditions as part of its forecasting method

Answers

Analog method is the answer :)

the method is analog forecasting method

analog forecasting method uses the past weather data and compares it with the existing one to forecast. it is a complex method since it involves remembering previous data for whether that can be triggered by a specific event.

with a bar magnet where are the lines of force closest together

Answers

At the tip of either of the magnets poles

Answer: at the tips of the magnet

Explanation: charges are more at the tip of a substance so likewise for a magnet

Calculate the absolute pressure at the bottom of a freshwater lake at a point whose depth is 27.8 m. assume the density of the water is 1.00 103 kg/m3 and the air above is at a pressure of 101.3 kpa.

Answers

The relative pressure at the bottom of the lake is given by
[tex]p_r = \rho g h[/tex]
where
[tex]\rho[/tex] is the water density
g is the gravitational acceleration
h is the depth at which the pressure is measured

At the bottom of the lake, h=27.8 m, so the relative pressure is
[tex]p_r = (1\cdot 10^3 kg/m^3)(9.81 m/s^2)(27.8 m)=2.72 \cdot 10^5 Pa[/tex]

To find the absolute pressure, we must add the atmospheric pressure, [tex]p_a[/tex], to this value:
[tex]p=p_r + p_a =2.72 \cdot 10^5 Pa + 1.013 \cdot 10^5 Pa =3.74 \cdot 10^5 Pa[/tex]

When light propagates from a material with a given index of refraction into a material with a smaller index of refraction, the speed of the light vie?

Answers

When light moves from a material with a higher index of refraction to one with a lower value, the speed of light increases, potentially causing the light to refract. The index of refraction ratio determines the extent of this change in speed.

When light travels from a material with a higher index of refraction to one with a lower index of refraction, the speed of light in the material increases. The index of refraction, denoted as n, is defined by the ratio n = c/v, where c is the speed of light in a vacuum (approximately 3.0 * 10⁻⁸ m/s), and v is the observed speed of light in the material.

Since the index of refraction for a vacuum is exactly 1 (because the speed of light in a vacuum is c), and since n is always greater than or equal to 1, when light enters a material with a smaller n, it means that v must increase."

For example, when light moves from water (where it travels slower due to a higher n) into air (with a smaller n), the light speeds up. This change in speed can cause the light to bend or refract. The extent to which this bending occurs depends on the difference in the indices of refraction between the two materials.

A certain part of the electromagnetic spectrum ranges from 200 nm to 400 nm. what is the lowest frequency associated with this portion of the spectrum? (c 3.00 108 m/s)

Answers

The lowest and highest wavelengths of this part of the electromagnetic spectrum are:
[tex]\lambda_1 = 200 nm=200 \cdot 10^{-9} m[/tex]
[tex]\lambda_2 = 400 nm = 400 \cdot 10^{-9} m[/tex]

We can calculate the corresponding frequencies by using:
[tex]f= \frac{c}{\lambda} [/tex]
where c is the speed of light. If we use this equation, we find:
[tex]f_1 = \frac{c}{\lambda_1}= \frac{3 \cdot 10^8 m/s}{200 \cdot 10^9 m} =1.5 \cdot 10^{15}Hz[/tex]
[tex]f_2 = \frac{c}{\lambda_2}= \frac{3 \cdot 10^8 m/s}{400 \cdot 10^9 m} =7.5 \cdot 10^{14}Hz[/tex]
Therefore, the lowest frequency associated with this portion of the spectrum is 
[tex]f_2 = 7.5 \cdot 10^{14} Hz[/tex]

What waves shown on the electromagnetic spectrum disturb the medium it passes through at answer?

Answers

Electromagnetic waves do not require material medium for propagation. Radiowaves have the longest wavelength but the least frequency. 
Gamma ray has the shortest wavelength but the highest frequency. 

The gamma rays and x-rays due to their high frequency, they can disturb the medium they pass through. They have high energy that can cause damage to the matter the come across.  

A magnetic field of 0.55 g is directed straight down, perpendicular to the plane of a circular coil of wire that is made up of 550 turns and has a radius of 20 cm. 1) if the coil is stretched, in a time of 35 ms, to a radius of 50 cm, calculate the emf induced in the coil during the process.

Answers

The emf induced in the coil is given by Faraday-Neumann-Lenz law:
[tex]\epsilon = - \frac{\Delta \Phi}{\Delta t} [/tex]
where 
[tex]\Delta \Phi[/tex] is the variation of magnetic flux through the coil
[tex]\Delta t[/tex] is the time interval

The magnetic field intensity is
[tex]B=0.55 G \cdot (1 \cdot 10^{-4} T/G) = 0.55 \cdot 10^{-4} T[/tex]

Since the magnetic field strength is constant, the variation of flux through the coil is given by
[tex]\Delta \Phi = N B \Delta A[/tex] (1)
where N=550 is the number of turns, while [tex]\Delta A[/tex] is the variation of area of the coil. We can re-write (1) as 
[tex]\Delta \Phi = NB (\pi r_1^2 - \pi r_2^2)=(550)(0.55 \cdot 10^{-4} T)(\pi (0.20m)^2-\pi (0.50m)^2) =[/tex]
[tex]=-0.020 Wb[/tex]

The time interval is [tex]\Delta t=35 ms=0.035 s[/tex], therefore the induced emf is
[tex]\epsilon = - \frac{\delta \Phi}{\Delta t}=- \frac{-0.020 Wb}{0.035 s}=0.57 V [/tex]

A calorie is the measurement of ____ required to raise a 1 gram of water 1 degree celsius.

Answers

Calorie is a unit of energy, it is used above all in the area of health to measure the energy content of food.
 
Therefore the statement must be completed in the following way:


A calorie is the measure of heat required to raise 1 gram of water 1 centigrade.

A boat is moving at 3 m/s and increases its speed at 2 m/s2. How fast is it moving after it travels 10 m from the point it begins to speed up?

Answers

The boat is moving by uniformly accelerated motion, with initial speed 
[tex]v_i = 3 m/s[/tex]
constant acceleration of
[tex]a=2 m/s^2[/tex]
and it covers a distance of
[tex]S=10 m[/tex]

So we can use the following relationship to find the final speed, [tex]v_f[/tex]:
[tex]v_f^2 - v_i^2 = 2aS[/tex]
[tex]v_f = \sqrt{v_i^2 + 2aS}= \sqrt{(3 m/s)^2 +2(2 m/s^2)(10 m)} = 7m/s [/tex]

The polar ice caps of mars is believed to consist mostly of

Answers

Solid Carbon Dioxide
Other Questions
20 POINTS!!Read this excerpt from My Bondage and My Freedom by Frederick Douglass: She had bread for the hungry, clothes for the naked, and comfort for every mourner that came within her reach. Slavery soon proved its ability to divest her of these excellent qualities, and her home of its early happiness. Conscience cannot stand much violence. Once thoroughly broken down, who is he that can repair the damage? It may be broken toward the slave, on Sunday, and toward the master on Monday. It cannot endure such shocks. It must stand entire, or it does not stand at all. If my condition waxed bad, that of the family waxed not better. The first step, in the wrong direction, was the violence done to nature and to conscience, in arresting the benevolence that would have enlightened my young mind. Which of the following sentences best describes Douglasss opinion about slavery?A)Slavery degrades the slaveholder by killing his or her conscience. B)Slavery prevents slave children from reaching their potential.C)Slavery is degrading to both the slaveholder and the enslaved.D)Slavery makes even the kindest people cruel and heartless. Help please !!What is the length of VW?A) 16 units B) \sqrt{x} 13C)20 units D) \sqrt{x} 20 Select all that apply.If two lines intersect and one angle measures 35, what are the measures of the other angles?356514545 When 0.440 mol of aluminum are allowed to react with an excess of chlorine gas, cl2, how many moles of aluminum chloride are produced? when 0.440 mol of aluminum are allowed to react with an excess of chlorine gas, cl2, how many moles of aluminum chloride are produced? 0.880 mol 0.440 mol 0.330 mol 0.220 mol 0.110 mol? The basis of civic participation is rooted in...A.the civil rights movement.B.religious convictions.C.the rights protected by the first amendment.D.joining advocacy organizations. In the word equation, sodium oxide water sodium hydroxide, the formula for sodium hydroxide is represented by Help please!!!!!!!!!!!!!!!!!!!! The process in which sediment is dropped and comes to rest is called How did the english civil war and the glorious revolution promote the development of the rights of english people? What is an ode? a lyric poem, characterized by heightened emotion a poem written as free verse a fourteen-line poem written in iambic pentameter a long narrative poem about the adventures of gods or heroes? Annie is planning a business meeting for her company. her budget is 1,325 for renting the meeting room at the local hotel and providing lunch. she expects 26 people to attend the meeting the room cost $270 which inequality show how to find the amount Annie can spend for lunch on each person What is it called when a blood vessel bursts in your brain? Let logba=3 logbc=2 logbd=5 what is the value of logba^3d^4/c^2 Which gastrointestinal secretion has a component that is required for the intestinal absorption of vitamin b12? If the number of moles of a gas initially contained in a 2.10 l vessel is doubled, what is the final volume of the gas in liters? (assume the pressure and temperature remain constant.) none of the above 8.40 4.20 1.05 6.30 List of all caribbean countries and their capitals Q # 13, write a rule for the linear function in the graph "the federal court derives its power from _____ and is organized according to _____." How did nationalism play a part in the downfall of Napoleon's French Empire?A.Some ethnic groups wanted their own freedom and self-governance. B.Some ethnic groups did not want to be in control of their own armies. C.Some ethnic groups proved to be smarter and better soldiers than the French. D.Some ethnic groups did not want to learn how to speak French in their schools. What is 9.8 divided by 7