Sugar cubes are placed in water. how will the mixture be affected by stirring the water, by breaking apart the sugar cubes, or by raising the temperature? each action will increase the speed that the sugar dissolves in the water. each action will increase the solubility of sugar in water. each action will increase the concentration of sugar that eventually is reached in the solution.
In the reactions of glycolysis, acetyl-coa formation and the citric acid cycle, chemical energy is transferred to the bonds in:
Will vote brainliest on all questions. I have to do them in a series cause this j e r k moderator seems to not like me.
1. A mountain biker goes for a ride in the desert. The air temperature is 21°C at the start of the ride, but the temperature in the desert will reach a peak of 51°C. The tires on the bike hold 15.6 L of nitrogen gas at a starting pressure of 249 kPa. The tires will burst when the internal pressure (Pb) reaches 269 kPa. Answer the following questions and show your work.
• How many moles of nitrogen gas are in each tire?
• What will the tire pressure be at the peak temperature in the desert?
• Will the tires burst at the peak temperature? Explain.
• To what pressure should the tire pressure be reduced before starting the ride to avoid bursting of the tires in the desert heat? (Assume no significant change in tire volume.)
Using the ideal gas law, the number of moles, final pressure at peak temperature, burst likelihood, and reduced starting pressure before the desert ride can be calculated to ensure the mountain biker's tires do not burst.
To solve these problems involving a mountain biker's tire pressure in the desert, one would use the ideal gas law, which is PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the ideal gas constant, and T is temperature in Kelvin. Given this equation and the conditions provided, we can make some calculations.
How many moles of nitrogen gas are in each tire?
We are given the initial conditions: pressure (P) = 249 kPa, volume (V) = 15.6 L, and temperature (T) = 21°C. However, we need to convert these to SI units: P in Pa, V in m³, T in K. To calculate n, the number of moles of nitrogen gas in each tire, we rearrange the ideal gas law to n = PV/(RT).
What will the tire pressure be at the peak temperature in the desert?
To find the final pressure, we will assume the volume of the tires and the amount of nitrogen remain constant. We thus use the equation P₁/T₁ = P₂/T₂, where P₁ and T₁ are the initial pressure and temperature, and P₂ and T₂ are the final pressure and temperature.
Will the tires burst at the peak temperature?
By calculating P₂, we can determine whether the final pressure exceeds the burst pressure of 269 kPa.
To what pressure should the tire pressure be reduced before starting the ride to avoid bursting of the tires in the desert heat?
We need to work backwards using the ideal gas law to determine the reduced pressure that will not exceed 269 kPa when at peak temperature conditions.
Which diagram(s) represents the bonding pattern of metals?
A and B
C and D
A
C
The answer is the third option which is A.
Please vote Brainliest if I am right. (:
Answer is: A.
1. Metallic bond is a type of chemical bond.
2. Metallic bond is formed between electrons and positively charged metal ions.
3. Metallic radius is defined as one-half of the distance between the two adjacent metal ions.
4. Metallic bond increace electrical and thermal conductivity.
5. Metals conduct heat, because when free moving electrons gain energy (heat) they vibrate more quickly and can move around.
The ksp of zinc carbonate (znco3 is 1.0 × 10–10. what is the solubility concentration of carbonate ions in a saturated solution at 25°c? 1.4 × 10–5m 7.1 × 10–6m 1.7 × 10–5m 1.0 × 10–5m
a gas at a pressure of 501 kpa
Help. Please.
Calculate the percent of acetic acid in the vinegar. (The density of vinegar is 1.002 g/ml.) How would I do this?,
"what percentage of the solar nebula's mass consisted of elements besides hydrogen and helium gases?"
At standard pressure the boiling point of an unsaturated nano3(aq) solution increases when
Answer:
4
Explanation:
It contains 36 protons and 48 neutrons. What is its mass number?
SOMEONE PLEASE HELP ME! MEDAL, FAN, AND TESTIMONIAL
K3PO4 + Al(NO3)3 → 3KNO3 + AlPO4
How many moles of potassium nitrate are produced when 2.5 moles of potassium phosphate react?
Round final answers to the tenth position, one place after the decimal. Please remember your units.,
Calculate the number of moles in 3.025 X 10^28 atoms of NaCl.
1.0 mol NaCl
5.02 X 10^4 mol NaCl
5.02 X 10^50 mol NaCl
1.78 X 10^39 mol NaCl
"when a hydrogen atom is covalently bonded to either oxygen"
Please help ill medal and fan!
After 15 minutes, 30 g of a sample of polonium-218 remain uncharged. If the original sample had a mass of 960 g, what is the half-life of polonium-218?
And
Suppose you want to separate the leaves, acorns, and twigs from a pile of soil. Filtration and distillation are two processes of separating mixtures. Explain which process you would use and why.
A theory which repeatedly fails to confirm the expected predictions:
probably needs to be developed into a law
probably should be discarded
requires more research time
should be maintained indefinitely,
Answer:
Probably should be discarded.
Explanation:
You are asked to bring the pH of 0.500L of 0.550 M NH4Cl to 7.00. Which of the following solutions would you use: 12.0 M HCl or 12.0 M NH3? How many drops (1 drop 0.05 mL ) of this solution would you use?
The answer to part one is 12.0 M NH3 but how do you answer the second part?
Thank you
He balanced equation for the reaction of acetylene, c2h2, and oxygen in an acetylene torch is 2 c2h2 + 5 o2 → 4 co2 + 2 h2o. in this reaction the number of grams of oxygen required to react with 0.13 g of acetylene is ________.
To react with 0.13 g of acetylene, 0.399 grams of oxygen are needed based on the molar masses and the balanced chemical equation 2 C2H2 + 5 O2
ightarrow 4 CO2 + 2 H2O.
To find the number of grams of oxygen required to react with 0.13 g of acetylene, we need to use the balanced chemical equation for the reaction and the molar mass of acetylene (C2H2) and oxygen (O2). The balanced chemical equation is 2 C2H2 + 5 O2
ightarrow 4 CO2 + 2 H2O. First, we calculate the molar mass of acetylene, which is (2 imes 12.01 g/mol for carbon) + (2 imes 1.008 g/mol for hydrogen) = 26.04 g/mol. Next, we determine how many moles of acetylene 0.13 g corresponds to by using the molar mass:
moles of C2H2 = 0.13 g / 26.04 g/mol = 0.00499 mol
According to the balanced equation, 2 moles of C2H2 react with 5 moles of O2. Therefore, for 0.00499 moles of C2H2, the moles of O2 required are (0.00499 mol C2H2 imes 5 moles O2) / 2 moles C2H2 = 0.012475 moles O2.
The molar mass of O2 is (2 imes 16.00 g/mol) = 32.00 g/mol. Now, we'll convert moles of O2 to grams:
grams of O2 = 0.012475 moles imes 32.00 g/mol = 0.399 grams of O2
Therefore, 0.399 grams of oxygen are required to react with 0.13 grams of acetylene.
If a particular utility burned 2.90 million tons of coal that was 2.00% sulfur by weight, how many tons of sulfur dioxide was emitted?
The empirical formula of a ompound is c2h5 and its formula mass is 58 amu. what is the molecular formula
What does a positive standard reduction potential mean about a given element?
The element is more readily oxidized than hydrogen.
The element is more readily oxidized than most other elements.
The element is more readily reduced than hydrogen.
The element is more readily reduced than most other elements.
The correct statement is " The element is more readily reduced than hydrogen." A hydrogen electrode is always attached to the rod of the element being investigated to obtain the electrode potential. It is called a standard hydrogen electrode, because the conditions are standard with pressure at 1 atm and the concentration of [tex]H^+[/tex] ions at 1M. A positive standard reduction potential means the element's electrode forms its metal ions less readily than hydrogen, which leads to the electrode being reduced by gaining electrons and the potential difference giving a positive value.
When 0.040 mol of propionic acid, c2h5co2h, is dissolved in 750 ml of water, the equilibrium concentration of h3o+ ions is measured to be 1.84 x 10-3 m. what is ka for this acid?
What is the name of the ionic compound CaO?
The ionic compound CaO, composed of calcium and oxygen ions, is named calcium oxide. Calcium typically forms a Ca2+ ion and oxygen forms an O2- ion, resulting in a neutral compound. The naming process is straightforward for binary ionic compounds, using the metal's name and the nonmetal's name with an '-ide' suffix.
Explanation:The ionic compound CaO is composed of calcium (Ca2+) and oxygen (O2-) ions. In naming ionic compounds, we typically use the name of the metal (calcium) followed by the name of the nonmetal with an '-ide' suffix. So the name of the ionic compound CaO is calcium oxide.
When forming ionic compounds, calcium, which is a group 2 element, will typically lose two electrons to form a Ca2+ ion. Oxygen, being in group 16, will typically gain two electrons to form an O2- ion. The positive and negative charges of these ions balance each other, resulting in a neutral compound.
The naming of other ionic compounds also follows this simple process when dealing with binary compounds – those containing only two elements. For example, Li2S would be named lithium sulfide, since it is composed of lithium ions and sulfide ions. When dealing with transition metals, which can have more than one ionic charge, roman numerals are used to indicate the charge of the metal, e.g., cobalt(III) oxide for Co2O3.
particle will balance the following nuclear equation?
234/91 Pa --> 234/92 U
Answer : Beta particle will balance the following nuclear equation.
Explanation :
The nuclear reaction is,
[tex]^{234}_{91}Pa\rightarrow ^{234}_{92}U+^{-1}_0\beta[/tex]
Beta particle : It forms when a neutron changes into a proton and a high-energy electron.
When the nucleus emits the beta particle, the mass number remains same and the atomic number increases by 1 and the nuclear charge increases by 1.
Hence, the Beta particle will balance the following nuclear equation.
What effect would poor circulation of the melting point bath liquid have on the observed melting point?
What determines if an element is a solid or liquid at room temperature? this isn't a test question BTW.,
How did john dalton explain a chemical reaction using his atomic theory?
A gas has a volume of 111 ml at a temperature of 32°c. What volume will the gas occupy at standard temperature?
The correct answer is that the gas will occupy a volume of approximately 99.53 ml at standard temperature.
To solve this problem, we will use Charles's Law, which states that the volume of a gas is directly proportional to its temperature in Kelvin, provided the pressure remains constant. The formula for Charles's Law is:
[tex]\[ \frac{V_1}{T_1} = \frac{V_2}{T_2} \][/tex]
where [tex]\( V_1 \) and \( T_1 \)[/tex] are the initial volume and temperature of the gas, and [tex]\( V_2 \) and \( T_2 \)[/tex] are the final volume and temperature.
First, we need to convert the given temperatures from Celsius to Kelvin:
[tex]\[ T_1 = 32^\circ C + 273.15 = 305.15 \text{ K} \][/tex]
[tex]\[ T_2 = 0^\circ C + 273.15 = 273.15 \text{ K} \] (standard temperature)[/tex]
Now we can rearrange Charles's Law to solve for [tex]\( V_2 \):[/tex]
[tex]\[ V_2 = V_1 \times \frac{T_2}{T_1} \][/tex]
Substitute the known values into the equation:
[tex]\[ V_2 = 111 \text{ ml} \times \frac{273.15 \text{ K}}{305.15 \text{ K}} \][/tex]
[tex]\[ V_2 = 111 \text{ ml} \times \frac{273.15}{305.15} \][/tex]
[tex]\[ V_2 \approx 111 \text{ ml} \times 0.896 \][/tex]
[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]
However, we must note that the standard pressure is typically considered to be 1 atmosphere (atm), and since the problem does not specify a change in pressure, we assume that the pressure remains constant. Therefore, the final volume at standard temperature and pressure (STP) is:
[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]
But, to be more precise, we should consider that STP is defined as 0°C (273.15 K) and 1 atm, where the molar volume of an ideal gas is 22.414 liters per mole. Since we are not given the moles of gas or the pressure, we will assume that the pressure is 1 atm, and thus the volume will change only due to temperature.
Given that the initial volume is 111 ml, and we have already calculated the ratio of the temperatures, the final volume at STP is:
[tex]\[ V_2 = 111 \text{ ml} \times 0.896 \][/tex]
[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]
Rounding to two decimal places, we get:
[tex]\[ V_2 \approx 99.53 \text{ ml} \][/tex]
However, there seems to be a discrepancy between the initially stated answer of 95.66 ml and the calculated answer of 99.53 ml. To ensure accuracy, let's re-evaluate the calculation:
[tex]\[ V_2 = 111 \text{ ml} \times \frac{273.15 \text{ K}}{305.15 \text{ K}} \][/tex]
[tex]\[ V_2 \approx 111 \text{ ml} \times 0.896 \][/tex]
[tex]\[ V_2 \approx 99.5315 \text{ ml} \][/tex]
Molecule: Br2 and Br2.
Is it polar or nonpolar?
Final answer:
The Br2 molecule is nonpolar because it consists of two identical bromine atoms sharing electrons equally, leading to no permanent dipole moment.
Explanation:
When determining if a molecule such as Br2 is polar or nonpolar, molecular symmetry plays a key role. The molecule Br2 consists of two bromine atoms covalently bonded together. Since both atoms are the same and share electrons equally, the bond between them is nonpolar. Furthermore, because the molecule is made up of only two identical atoms, it has no molecular geometrical complexity that could lead to an uneven distribution of charge. In contrast, molecules like CO2 and H2O have polar bonds, but CO2 is nonpolar due to its linear shape causing the bond moments to cancel, while H2O is polar due to its bent shape and the presence of lone pairs on the oxygen atom which do not allow the bond moments to cancel out.
A student must find the total mass of several bouncing balls but none of the balls or remain on a triple beam balance propose a method for measuring the mass of the bouncing balls using the balance
A method for the student to find the total mass of the balls, without the problems of the balls not remaining in the balance, to synchronize a type of container or box that could house all the balls. With the container still empty, the student should weigh the container and note the weight. After that, the student should place the balls into the container and weigh the container along with the balls and note the weight.
In the second weighing the student will have the weight of the container along with the weight of the balls, but in the first weighing the student weighed the container alone. Thus, we can conclude that if the student subtracts the weight of the balls with the container by the hair of the soxinho regipiente, the student will result in the total mass of the balls.
What are the balanced chemical equations for Hydrochloric acid and potassium hydroxide?
The balanced chemical equation for the reaction between Hydrochloric acid (HCl) and potassium hydroxide (KOH) is: HCl + KOH → KCl + H₂O.
A student has asked for the balanced chemical equations for Hydrochloric acid and potassium hydroxide. The balanced chemical equation for the reaction between Hydrochloric acid (HCl) and potassium hydroxide (KOH) is:
HCl + KOH → KCl + H₂O
In this neutralization reaction, Hydrochloric acid (a strong acid) reacts with potassium hydroxide (a strong base) to produce potassium chloride (a salt) and water. This type of reaction is typical between acids and bases where the hydrogen ion (H⁺) from the acid combines with the hydroxide ion (OH⁻) from the base to form water.