Answers
Answer:
C
Explanation:
Related Questions
You have been hired as a chemist. Your first task at your new job is to examine a newly discovered atom. The paperwork you are given states that its atomic number is 110. What does this mean?
A. The atom contains 55 electrons
B. The atom contains 50 electrons and 50 neutrons
C. The atom contain 110 protons
D. All of the above
E.None of the above
Answers
The identity of an element depends on the number of protons and neutrons in the nucleus. protons in the atom. neutrons in the atom. electrons in the atom.
Answers
Answer:
protons in the atom.
Explanation:
The identity of an element relies on the number of protons in its atom. This is called the atomic number. The atomic number is the basis of the periodic table of elements. Modern periodic law states that "the properties of elements are a periodic function of their atomic number".
Atomic number of atoms do not change and they are convieniently used in identifying an atom.
Answer:
protons in the atom
Explanation:
What mass of carbon dioxide (in kg) is produced upon the complete combustion of 18.9 L of propane (approximate contents of one 5-gallon tank)? Assume that the density of the liquid propane in the tank is 0.621 g/mL. (Hint: Begin by writing a balanced equation for the combustion reaction.)
Answers
There is 35.14 kg of carbon dioxide is produced upon the complete combustion of 18.9 L of propane.
Given that;
The density of the liquid propane in the tank is 0.621 g/mL.
Now write the balanced equation for the combustion of propane (C₃H₈):
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
According to the balanced equation, one mole of propane (C₃H₈) produces three moles of carbon dioxide (CO₂) upon complete combustion.
Given:
Volume of propane = 18.9 L
Density of liquid propane = 0.621 g/mL
First, let's determine the mass of propane (C₃H₈) using its density:
Mass of propane = Volume of propane × Density of liquid propane
Moles of propane = (18.9 L × 1000 mL/L × 0.621 g/mL) / 44.10 g/mol
Moles of propane ≈ 266.14 mol
Moles of carbon dioxide = Moles of propane (3 moles CO₂ / 1 mole C₃H₈)
Moles of carbon dioxide ≈ 266.14 mol (3 mol CO₂ / 1 mol C₃H₈)
Moles of carbon dioxide ≈ 798.42 mol
Now, let's calculate the mass of carbon dioxide:
Mass of carbon dioxide = Moles of carbon dioxide × Molar mass of carbon dioxide
The molar mass of carbon dioxide = 44.01 g/mol
Mass of carbon dioxide ≈ 798.42 mol × 44.01 g/mol
Mass of carbon dioxide ≈ 35,138.5 g
Since the mass is in kilograms, convert grams to kilograms:
Mass of carbon dioxide ≈ 35,138.5 g / 1000
Mass of carbon dioxide ≈ 35.14 kg
Therefore, approximately 35.14 kg of carbon dioxide is produced upon the complete combustion of 18.9 L of propane.
To learn more about the measurement unit visit:
https://brainly.com/question/777464
#SPJ12
The balanced equation for combustion of propane is used to determine the stoichiometric relationship between propane and carbon dioxide. Using the given density, the volume of propane is converted to moles and then to grams of CO2. Finally, grams of CO2 are converted to kg to answer the question.
Explanation:The subject of this question is the combustion reaction of propane. The balanced equation for the combustion of propane (C3H8) is that propane reacts with oxygen (O2) to produce carbon dioxide (CO2) and water (H2O), in a 3:1 ratio of CO2 to C3H8.
Therefore, the formula is: C3H8 + 5O2 -> 3CO2 + 4H2O
To determine the amount of carbon dioxide produced, we need to start by converting the volume of liquid propane to moles using the given density and the molar mass of propane (44.1 g/mol). Then, use the stoichiometric relationship from the balanced equation to convert from moles of propane to moles of carbon dioxide. Finally, convert the moles of CO2 to grams (and then to kg) using the molar mass of CO2 (44.01 g/mol).
Learn more about Combustion Reactions here:https://brainly.com/question/12172040
#SPJ11
Write a balanced equation for the reaction of Na₂S and CdSO₄. Express your answer as a chemical equation. Identify all of the phases in your answer. Enter no reaction if no precipitate is formed.
Answers
Explanation:
A chemical reaction equation that contains same number of atoms on both reactant and product side is known as a balanced chemical reaction equation.
For example, [tex]Na_{2}S(aq) + CdSO_{4}(aq) \rightarrow Na_{2}SO_{4}(aq) + CdS(s)[/tex]
Here, number of reactant molecules are as follows.
Na = 2
S = 2
Cd = 1
O = 4
Number of product molecules are as follows.
Na = 2
S = 2
Cd = 1
O = 4
As there are already equal number of atoms on both reactant and product side. Hence, the reaction equation is balanced.
Also, in this reaction both [tex]Na_{2}S[/tex] and [tex]CdSO_{4}[/tex] are present as aqueous solution. And, CdS is the precipitate that is formed as it is the insoluble solid that forms.
[tex]Na_{2}SO_{4}[/tex] is present in aqueous state.
You find a compound composed only of element X and chlorine and you know that the compound is 13.10% X by mass. Each molecule of the compound contains six times as many chlorine atoms as X atoms. What is element X?
Answers
Answer:
Explanation:
So, the formula for the compound should be:
[tex]XCl_{6}[/tex]
Now we assume that we have 1 mol of substance, so we can make calculations to know the molar mass of element X, as follows:
[tex]M_{Cl}=35.45g/mol\\[/tex]
So we have that 6 moles weight 212.7g, and we can make a rule of three to know the weight of compound X:
[tex]212.7g\rightarrow 86.9\%\\x\rightarrow 13.1\%\\\\x=\frac{212.7g*13.1}{86.9} =32.06g[/tex]
As we used 1 mol, we know that the molar mass is 32.06g/mol
So the element has a molar mass of 32.06 g/mol and an oxidation state of +6, with this information, we can assure that the element X is sulfur, so the compound is [tex]SCl_{6}[/tex]
Final answer:
To identify element X in a compound with chlorine, where X constitutes 13.10% of the compound's mass, and the atom ratio of X to Cl is 1:6, we calculate based on moles and percent composition, leading to the identification of phosphorus (P) as element X.
Explanation:
To find element X in a compound composed of element X and chlorine, where the compound is 13.10% X by mass, and each molecule of the compound contains six times as many chlorine atoms as X atoms, we can use the concept of percent composition and atomic weights. Assuming a 100 g sample, we can calculate that there are 13.10 g of element X and 86.90 g of chlorine. Given that the molar mass of chlorine (Cl) is approximately 35.45 g/mol, we can estimate the moles of chlorine and use the given ratio to find the moles and eventually, the molar mass of element X. If we assume that there is 1 mole of X and 6 moles of Cl in the molecule, we can calculate the molar mass of X using its percent composition and the total molar mass of chlorine present.
Step-by-step:
Calculate moles of chlorine: 86.90 g / 35.45 g/mol = approximately 2.45 moles of Cl.Given the 1:6 ratio, the moles of X = 2.45 moles of Cl / 6 = approximately 0.408 moles of X.Find the mass of X using its percent composition: 13.10 g of X / 0.408 moles = approximately 32.10 g/mol, which hints at element X being phosphorus (P), with an atomic mass of about 30.97 g/mol.A base a. causes phenolphthalein indicator to change from colorless to pink. b. donates a proton in a proton transfer reaction. c. accepts electrons in an electron transfer reaction. d. produces hydrogen ions in solution. e. does none of the above.
Answers
Answer: a. causes phelophtalein indicator to change from colorless to pink
Explanation:
Phenolphtalein is an indicator, which means it can visually change when given certain circumstances.
Phenolphtalein turns fuchsia when exposed to basic substances, especially above a pH of 8.2, due to ionization, which changes the structure of the indicator.
help anyone please ;)
will mark brainliest!!
thank you lol <3
Answers
Answer:
The answer to your question is below
Explanation:
2.- 6
3.- Carbon
4.- These electrons can be share to obtain stability.
5.- Protons, electrons
6.- electron cloud
7.- I and III
8.- 1
9.- 8A
10.- 4
11.- F
12.- F
13.- F
14.- T
15.- T
16.- T
17.- T
18.- T (I can not read the question but I think is true)
2. 6 electrons
3. Carbon
4. Valance electrons are different from electrons because valance electrons are on the most out e-cloud (octet) and while electrons are not on the most outer e-cloud.
5. B
6. Octet (or e-cloud I think)
7. Atomic number (I think)
8. 1
9. Group 18 (I think)
10. 4 electrons
11. F
12. F
13. F
14. T
15. T
16. T
17. T
18. I can’t really see it :(
A large number of molecules begin moving very fast, rarely bumping into one another, and taking up the entire space available to them. As the temperature drops and the kinetic energy of the particles decreases, the particles move more slowly and run into each other more often. They eventually form a lattice structure, only slightly moving. What is this process called?
Vaporization, then condensation
Sublimination, then freezing
Freezing
Condensation, then freezing
Decrease in temperature
Answers
Answer: Condensation, then freezing is the correct option.
Explanation:
Condensation is defined as the process in which vapor state of a substance changes into liquid state.
Vaporization is defined as the process in which liquid state of a substance changes into vapor state.
Freezing is defined as the process in which liquid state of a substance changes into solid state.
Sublimation is defined as the process in which a solid changes directly into vapor state without undergoing liquid state.
In a solid, particles are arranged in a crystal lattice as they are held together by strong intermolecular forces of attraction due to which these molecules are unable to move from their mean position.
So, in the given situation when the particles move more slowly and run into each other more often. They eventually form a lattice structure, only slightly moving. Then it means substance has first changed into liquid state and then finally it became a solid.
Thus, we can conclude that this process is called condensation, then freezing.
The following five beakers, each containing a solution of sodium chloride (NaCl, also known as table salt), were found on a lab shelf:
Beaker Contents
1) 200. mL of 1.50 M NaCl solution
2) 100. mL of 3.00 M NaCl solution
3) 150. mL of solution containing 19.5 g of NaCl
4) 100. mL of solution containing 19.5 g of NaCl
5) 300. mL of solution containing 0.450 mol NaCl
Arrange the solutions in order of decreasing concentration.
Answers
Answer:
The solutions in order of decreasing concentration:
(IV) > (II) > (III) > (I) = (V)
Explanation:
1) 200 mL of 1.50 M NaCl solution - (I)
Concentration of NaCl is given , [NaCl]= 1.50 M
2) 100 mL of 3.00 M NaCl solution - (II)
Concentration of NaCl is given , [NaCl]= 3.00 M
3) 150 mL of solution containing 19.5 g of NaCl - (III)
Moles of NaCl = [tex]\frac{19.5 g}{58.5 g/mol}= 0.3333 mol[/tex]
Volume of solution = 150 mL = 0.150 (1L = 1000 mL)
[tex][NaCl]=\frac{0.3333 mol}{0.150 L}=2.222 M[/tex]
4) 100 mL of solution containing 19.5 g of NaCl - (IV)
Moles of NaCl = [tex]\frac{19.5 g}{58.5 g/mol}= 0.3333 mol[/tex]
Volume of solution = 100 mL = 0.100 (1L = 1000 mL)
[tex][NaCl]=\frac{0.3333 mol}{0.100 L}=3.333 M[/tex]
5) 300 mL of solution containing 0.450 mol NaCl - (V)
Moles of NaCl = 0.450 mol
Volume of solution = 300 mL = 0.300 (1L = 1000 mL)
[tex][NaCl]=\frac{0.450 mol}{0.300 L}=1.50 M[/tex]
The solutions in order of decreasing concentration:
(IV) > (II) > (III) > (I) = (V)
We have 5 beakers with different solutions of NaCl. The order of the solutions in order of decreasing concentration is: 4, 2, 3, 1 = 5.
We have 5 beakers with different solutions of NaCl. To compare their concentrations, we will calculate the molarity of each solution.
1) 200. mL of 1.50 M NaCl solutionThe molarity of the solution is 1.50 M.
2) 100. mL of 3.00 M NaCl solution
The molarity of the solution is 3.00 M.
3) 150. mL of solution containing 19.5 g of NaCl
We will use the following expression.
[tex]M = \frac{mass\ solute }{molar\ mass\ solute \times liters\ solution} = \frac{19.5g}{58.44g/mol \times 0.150L} = 2.22 M[/tex]
4) 100. mL of solution containing 19.5 g of NaCl
We will use the following expression.
[tex]M = \frac{mass\ solute }{molar\ mass\ solute \times liters\ solution} = \frac{19.5g}{58.44g/mol \times 0.100L} = 3.34 M[/tex]
5) 300. mL of solution containing 0.450 mol NaCl
We will use the following expression.
[tex]M = \frac{moles\ solute }{liters\ solution } = \frac{0.450mol}{0.300L} = 1.50M[/tex]
The order of the solutions in order of decreasing concentration is:
4, 2, 3, 1 = 5
We have 5 beakers with different solutions of NaCl. The order of the solutions in order of decreasing concentration is: 4, 2, 3, 1 = 5.
Learn more: https://brainly.com/question/2817451
In a laboratory experiment, a fermenting aqueous solution of glucose and yeast produces carbon dioxide gas and ethanol. The solution was heated by burning natural gas in a Bunsen burner to distill the ethanol that formed in the flask. During the distillation, the ethanol evaporated and then condensed in the receiving flask. The flame of the burner was kept too close to the bottom of the flask and some of the glucose decomposed into a black carbon deposit on the inside of the flask. During this experiment the following changes occurred. Which of these changes involved a physical change and not a chemical change? Check all that apply. Check all that apply.
1-condensation of ethanol
2-evaporation of ethanol
3- formation of carbon dioxide gas from glucose burning of natural gas
4-formation of ethanol from glucose by yeast
5-formation of a carbon deposit inside the flask
Answers
Answer: Two answers apply to physical change:
1-Condensation of Ethanol
2-Evaporation of Ethanol
Explanation:
Physical and Chemical changes are two very different types of change. However, both processes are possible because of the same thing: the investment of energy.
Physical change requires a lower investment of energy and this is the reason why these kind of changes can be reverted and the molecular structure of the matter does not change.
For example: I can easily change the state of water with fire or a fridge, and go from ice to liquid to vapor and back as many times I want. This is possible because I'm not giving enough energy to break or modify bonding forces inside the molecule of water, but enough energy to modify the interaction between two different molecules of water.
This is why Ethanol can be evaporated and then condensated into liquid again, representing this physical changes.
Chemical change, on the other hand, requires a higher investment of energy and because of this is that the bonds between atoms inside a molecule can be affected (bonds between atoms in the molecule are stronger). Therefore, when the molecules themselves are modified, the matter is transformed from a compound into a new one. This is why glucose becomes carbon dioxide, ethanol or carbon. These three compounds appear when the bonds between Carbons in the glucose are broken.
This problem has been solved!See the answerFrom the information in this chapter on the mass of the proton, the mass of the electron, and the sizes of the nucleus and the atom, calculate the densities of a hydrogen nucleus and a hydrogen atom. (Radius of hydrogen atom is 1 ✕ 10-8 cm.)Can someone please help with this two part question? I have asked twice on here and I am still getting it wrong on my WebAssign-it's the only one I cannot get!.... Thank you in advance!!density of hydrogen nucleus :
Answers
The density of a hydrogen nucleus is approximately 1.24 x 10^17 kg/m^3, and the density of a hydrogen atom is approximately 8.38 x 10^16 kg/m^3.
Explanation:To calculate the density of a hydrogen nucleus, we can use the formula for density, which is mass divided by volume. The mass of a proton is approximately 1.67 x 10^-27 kg, and the volume of a sphere can be calculated using the formula V = (4/3)πr^3. Let's assume the radius of a hydrogen nucleus is equal to the diameter of a proton, which is approximately 1.2 fm. Plugging these values into the formula, we can calculate the density of a hydrogen nucleus.
density = mass / volume = 1.67 x 10^-27 kg / ((4/3)π(0.6 x 10^-15 m)^3) = 1.24 x 10^17 kg/m^3
So, the density of a hydrogen nucleus is approximately 1.24 x 10^17 kg/m^3.
To calculate the density of a hydrogen atom, we need to know its mass and volume. The mass of an electron is approximately 9.11 x 10^-31 kg, and the volume of a sphere can be calculated using the formula V = (4/3)πr^3. Let's assume the radius of a hydrogen atom is equal to the given value, which is 1 x 10^-8 cm. Plugging these values into the formula, we can calculate the density of a hydrogen atom.
density = mass / volume = 9.11 x 10^-31 kg / ((4/3)π(0.5 x 10^-10 m)^3) = 8.38 x 10^16 kg/m^3
So, the density of a hydrogen atom is approximately 8.38 x 10^16 kg/m^3.
During a reaction 24 cubic cm of carbon dioxide was given off. After 8 minutes no more gas was produced and the reaction was complete. What was the rate of this reaction
Answers
Answer:
Explanation:
Given parameters:
Volume of CO₂ = 24cm³
time taken for the reaction to complete = 8minutes.
Unknown:
rate of reaction
Soution
The reaction rate is a measure of speed of a chemical reaction. It is often calculated using the expression below:
Reaction rate = [tex]\frac{change in concentration of reactant/product}{time taken}[/tex]
Reaction rate = [tex]\frac{24}{8}[/tex] = 3cm³/min
In this reaction, 3cm³ of carbon dioxide were produced per minute
The study of chemicals and bonds is called chemistry. There are two types of elements and these are metals and nonmetals.
The correct answer 3Cm.
What is carbon dioxide?Carbon dioxide is a chemical compound occurring as an acidic colorless gas with a density about 53% higher than that of dry air. Carbon dioxide molecules consist of a carbon atom covalently double bonded to two oxygen atoms. It occurs naturally in Earth's atmosphere as a trace gasThe data is given as follows:-
Volume of CO₂ = 24cm³Time is taken for the reaction to complete = 8minutes.The reaction rate is a measure of the speed of a chemical reaction. It is often calculated using the expression below:
Reaction rate = [tex]\frac{change\ in\ concentration}{time}[/tex]
Reaction rate =[tex]\frac{24}{8}[/tex] = 3cm³/min
Hence, In this reaction, 3cm³ of carbon dioxide were produced per minute
For more information about the gas, refer to the link:-
https://brainly.com/question/14688752
All of these conditions can cause protein denaturation, except:
high temperatures from cooking.
digestion by pancreatic proteases.
the presence of hydrochloric acid.
a change in blood pH.
an increase in body temperature due to high fever.
Answers
Answer:
The correct option is: an increase in body temperature due to high fever
Explanation:
Denaturation of protein is a process by which the protein unfolds i.e. loses it's quaternary, tertiary, and the secondary structure when exposed to high temperature (above 41°C), change in pH or chemical denaturants. Denaturation of proteins leads to loss of activity.
The enzymes pancreatic proteases breaks down proteins by hydrolysis, thus leading to the denaturation of protein.
Since, generally fever does not increase the body temperature above 41°C. Therefore, it doesn't lead to denaturation of protein.
Final answer:
Digestion by pancreatic proteases does not cause protein denaturation; it results in protein hydrolysis, which is the breakdown of proteins into amino acids. Protein denaturation can be reversible unless caused by irreversible changes such as cooking an egg white. Other factors causing denaturation include high temperatures, acidic conditions, and changes in pH.
Explanation:
Protein denaturation occurs when the structure of a protein is altered, leading to a loss of function. Factors that can cause denaturation include high temperatures from cooking, the presence of hydrochloric acid, changes in blood pH, and an increase in body temperature due to fever.
However, digestion by pancreatic proteases does not cause protein denaturation; instead, these enzymes are designed to operate in the digestive system and facilitate the process of protein hydrolysis, breaking down proteins into their constituent amino acids without denaturing them.
Thus, all of the listed conditions can cause denaturation, except for the digestion by pancreatic proteases, which actually serves a different purpose in the body. Protein denaturation is a delicate process, often reversible if the denaturing agent is removed, allowing the protein to resume its function. Some proteins, like those in bacteria that survive in hot springs, are adapted to function at high temperatures and do not denature easily, unlike the albumin protein in egg white which denatures irreversibly when cooked.
A student measures the volume of a liquid in a graduated cylinder of 250 mL capacity, and finds the volume of the liquid to be 200 mL. The student transfers the liquid to a graduated cylinder with a capacity of 500 mL. What is the volume of the liquid in the 500 mL cylinder?
A. unknown
B. 100 mL
C. 200 mL
D. 500 mL
Answers
Answer:
Option C = 200 mL
Explanation:
The volume of liquid remain same because students just transfer the liquid from the graduated cylinder with the capacity 250 mL to the graduated cylinder having the capacity of 500 mL. The volume of the liquid will remain same either it is in the large graduated cylinder or in a small graduated cylinder.
Vanillin (used to flavor vanilla ice cream and other foods) is the substance whose aroma the human nose detects in the smallest amount. The threshold limit is 2.0 × 10−11 g per liter of air. If the current price of 50.0 g of vanillin is $115, determine the cost to supply enough vanillin so that the aroma could be detected in a large aircraft hangar with a volume of 5.47 × 107 ft3.
Answers
Answer:
[tex]\boxed{\text{\$0.07}}[/tex]
Explanation:
1. Convert cubic feet to litres
[tex]V =5.47 \times 10^{7} \text{ ft}^{3} \times \dfrac{\text{28.32 L}}{\text{1 ft}^{3}} = 1.549 \times 10^{9}\text{ L}[/tex]
2. Calculate the mass of vanillin
[tex]m = 1.549 \times 10^{9}\text{ L} \times \dfrac{2.0 \times 10^{-11}\text{ g}}{\text{1 L}} = \text{0.030 98 g}[/tex]
3. Calculate the cost of the vanillin
[tex]\text{Cost} = \text{0.03098 g} \times \dfrac{\textbf{\$115 }}{\text{50.0 g}} = \text{\$0.07}\\\text{The cost of the vanillin is $\boxed{\textbf{\$0.07}}$}[/tex]
The cost of the Vanillin is $0.07.
What is vanillin used for?
it is utilized in flavorings, foods, perfumes, and pharmaceuticals. Vanillin is used as a chemical intermediate in the manufacture of several essential pills and different merchandise. Human publicity to vanillin is through dermal contact with perfumes and ingestion of meal products that consist of vanillin as a flavor additive.
Is vanillin dangerous for your fitness?Vanillin is thought to release numerous substances whilst burnt. these consist of polycyclic fragrant hydrocarbons, that have been classed as human cancer-causing agents through the global corporation for studies on most cancers.
Learn more about Vanillin here: https://brainly.com/question/19338507
#SPJ2
Which of the following elements have unstable electron shells?
A. Hydrogen (H)
B. Chlorine (Cl)
C. Calcium (Ca)
D. All of these
Answers
They all are unstable as single atoms by themselves but can become stable after losing or sharing their one valence electron.
All of these elements have unstable electron shells ,
Due to their unstable electron configurationSo, option D is correct
Hydrogen element stable by gaining or losing one electron .Chlorine element stable by gaining one electron.Calcium element stable by losing two electron.What is unstable electron configuration element ?The atom in which outermost shell which is called valence shell is incomplete is consider as unstable electron configuration atom or element.
learn about unstable electron shell.
https://brainly.com/question/1407637
#SPJ2
Use the periodic table to identify the name or atomic number for each element below. (Give the name, not the chemical symbol, for each element.) hafnium: atomic number : atomic number 15 : atomic number 45 osmium: atomic number magnesium: atomic number
Answers
Answer:
hafnium atomic number 72
phosphorus atomic number 15
rhodium atomic number 45
osmium atomic number 76
magnesium atomic number 12
Explanation:
What type of chemical hazard results from incomplete combustion of petroleum-based chemicals and other organic substances?
a. Polycyclic aromatic hydrocarbons
b. Polychlorinated biphenyls
c. Persistent organic pollutants
d. Volatile organic compounds
e. None of these is correct.
Answers
Answer:
the answer is the option "a"
Explanation:
in petroleum polycyclic aromatic hydrocarbons are found. These organic compounds are composed of aromatic rings. PAH (Polycyclic Aromatic Hydrocarbons), are formed during the incomplete combustion of any type of organic matter. In general, exposure will be to a mixture of PAHs.
A frictionless piston-cylinder device contains 2 kg of nitrogen at 100 kPa and 300 K. Nitrogen is now compressed H slowly according to the relation PV1.4 = constant until it reaches a final temperature of 360 K. Calculate the work El input during this process.
Answers
Answer:
254
Explanation:
From his experiments, J. J. Thomson concluded that cathode ray particles can move at very fast speeds. cathode ray particles can be moved by electric current atoms contain small positively charged particles that are called protons. atoms contain small negatively charged particles that are called electrons.
True / False.
Answers
Answer:
False
Explanation:
J. J. Thomson conducted an experiment which lead to the discovery of negatively charged particles only. He took a discharged tube and passed high voltage current through the gas and noticed that some particles from cathode is being emitted. They are fast moving particles and are deviated in the electrical and the magnetic field.
J. J. Thomson did not conclude anything about the positive charge. Hence, the statement is false.
A pattern that has been established based on verified experimental data that describes an observation but does not provide an explanation as to the reason why said observation occurs is a _________.
Answers
Answer:
Hypothesis
Explanation:
This is a hypothesis. A hypothesis is simply a scientific guess to explain a particular phenomenon. It provides different approaches to which an observation can be verified and properly ascertained.
If we can deduce a pattern from a set of experimental data that we have but we have not explained why the observations occur, this is still within the phase of the scientific method called hypothesis.
Answer:
The correct answer will be-scientific law
Explanation:
The experiment is performed to test a tentative explanation or hypothesis which explains the process to a limited extent. The hypothesis when proved through repeated experiments gets transformed either in the scientific law or the scientific theory depending on the quantitative measurement.
The scientific law represents the description of any natural phenomenon by providing the mathematical expressions but it does not provide an explanation to the natural process as provided by the scientific theory.
Since the statement does not provide the explanation but only the description of the natural events therefore, a scientific law is the correct answer.
The pressure of a gas at constant temperature is increased by a factor od 4. By what factor does the volume change?
A 1/4
B 1/2
C 1
D 4
Answers
Answer:
A
Explanation:
The formula used is
PV = P1 * V1
P = x
P1 = 4x
V1 = 1
V2 = ?
x * 1 = 4x * V2 Divide both sides by x
x/x = 4x /x * V2
1 = 4*V2 Divide by 4
1/4 = 4*V2/4
1/4 = V2
The answer is A
Final answer:
According to Boyle's Law, at constant temperature, if the pressure of a gas is increased by a factor of 4, the volume decreases by a factor of 1/4.
Explanation:
The question is related to the behavior of gases under varying conditions of pressure and volume at constant temperature, described mathematically by Boyle's Law. Boyle's Law states that at constant temperature, the pressure of a gas is inversely proportional to its volume. Therefore, when the pressure of a gas at constant temperature is increased by a factor of 4, the volume must decrease by that inverse factor. Consequently, the volume would change by a factor of 1/4, making the correct answer A (1/4).
Which statement is true of the following reaction?
It is balanced for charge and for number of atoms.
It is not balanced for charge or for number of atoms.
It is not balanced for charge but is balanced for number of atoms.
It is balanced for charge but is not balanced for number of atoms.
Answers
Answer:
the answer is D
Explanation:
:0)
Important moleculear discoveries in the 1980s have led researchers to hypothesize theat the original vital orgnaic molecule shaping living things was not what was first thought. What molecule is currently supported as the candidate for the vital molecule for earlly life?
Answers
Answer:
RNA
Explanation:
Oparin-Haldane hypothesis says that the life gradually arose from amino acids and then they combining to make the complex polymers.
Miller-Urey experiment provided first evidence that the organic molecules needed for the life could be formed from the inorganic components.
Currently, Scientists support RNA world hypothesis. It suggests that first life was the self-replicating RNA. Thus, RNA is vital molecule for the early life.
Choose the correct order of the lake cycle. River blockage, plain flooding, sediment deposition, bog formation, solid ground plain flooding, river blockage, bog formation, sediment deposition, solid ground river blockage, plain flooding, bog formation, sediment deposition, solid ground plain flooding, river blockage, sediment deposition, bog formation, solid ground
Answers
Answer:
plain flooding, river blockage, sediment deposition, bog formation, solid ground
Explanation:
Answer:
plain flooding, river blockage, sediment deposition, bog formation, solid ground
Explanation:
hope it helps
how does an ice cube particles turn to a gas by laying in the sun?
Answers
Fermentation has a relatively low atp yield compared to aerobic respiration because
Answers
Answer:
Oxidative phosphorylation yields a lot of ATP.
Explanation:
There are two types of respiration:
1. Aerobic respiration
2. Anaerobic respiration
Aerobic respiration
It is the breakdown of glucose molecule in the presence of oxygen to yield large amount of energy. Water and carbon dioxide are also produced as a byproduct.
Glucose + oxygen → carbon dioxide + water + 38ATP
Anaerobic Respiration
It is the breakdown of glucose molecule in the absence of oxygen and produce small amount of energy. Alcohol or lactic acid and carbon dioxide are also produced as byproducts.
Glucose→ lactic acid/alcohol + 2ATP + carbon dioxide
This process use respiratory electron transport chain as electron acceptor instead of oxygen. It is mostly occur in prokaryotes. Its main advantage is that it produce energy (ATP) very quickly as compared to aerobic respiration.
Steps involve in anaerobic respiration are:
Glycolysis
Glycolysis is the first step of both aerobic and anaerobic respiration. It involve the breakdown of one glucose molecule into pyruvate and 2ATP.
Fermentation
The second step of anaerobic respiration is fermentation. It involve the fermentation of pyruvate into lactic acid or alcohol depending upon the organism in which it is taking place. There is no ATP produced, however carbon dioxide is released in this step. Fermentation itself not produced ATP but produce in glycolysis step.
Need help with this chem question (multiple choice)
Answers
Answer:
The correct option is A.
Explanation:
Isomers are molecules with the same formula but different structure. If you look at the previous structures and count the number of C and H, you find that A and the molecule from the question has the same number of C and H, but their structures are different.
Two containers hold the same radioactive isotope. Container A contains 1000 atoms, and container B contains 500 atoms. which container has greater radioactive decay?The rate of decay of atoms in container A is greater than the rate of decay of atoms in container B.
Answers
Answer:
The rate of decay of atoms (half-life) in container B is the same as the rate of decay of atoms (half-life) in container A.
Which of the following characteristics are true about a typical peptide (amide) bond?
The bond is planar.
There is free rotation about the carbonyl carbon and nitrogen bond.
There is substantial double-bond character to this bond.
There is a net negative charge on nitrogen and net positive charge on oxygen.
Answers
Answer:
The bond is planar. There is free rotation about the carbonyl carbon and nitrogen bond.
Explanation:
The peptide bond is planar and for this reason there is free rotation about the carbonyl carbon and nitrogen bond. Peptide bonds don't have double-bonds or delocalized electrons in their structure. Both oxygen and nitrogen have a net negative charge on the peptide bonds.
A peptide bond is planar, does not allow free rotation due to its double-bond character, and has no net charge under physiological conditions.
Explanation:The characteristics of a typical peptide (amide) bond are as follows:
The bond is planar. This is because of the resonance or delocalization of the peptide bond.There is not free rotation about the carbonyl carbon and nitrogen bond. This is due to the double-bond character of the peptide bond caused by the resonance.A peptide bond has a double bond character which gives it its planar structure.There is no net charge on either the nitrogen or the oxygen in a peptide bond under physiological circumstances i.e. pH 7.4. So, the last statement that nitrogen has a net negative charge and oxygen has a positive charge is not correct.Learn more about Peptide Bond here:https://brainly.com/question/35560541
#SPJ3