Answer:
False
Explanation:
But with proper argument both sides have a point. Yes, the earth naturally makes there energy sources, but with out human motivation and work ethic we wouldn't have the power to harness the energy and use it in our every day lives. But the answer is FALSE
If 2500. J of energy are added to 120. g of benzene at 30. degrees C, what will be its final temperature?
The final temperature of benzene after adding 2500 J of energy is 41.97°C.
To determine the final temperature of benzene after adding 2500 J of energy, we can use the formula for specific heat capacity:
q = mcΔT
Where:
q is the heat added (2500 J)m is the mass of benzene (120 g)c is the specific heat capacity of benzene (1.74 J/g°C)ΔT is the change in temperatureRearranging the formula to solve for ΔT:
ΔT = q / (mc)
Substitute the given values:
[tex]\Delta T = \frac{2500 \, \text{J}}{120 \, \text{g} \times 1.74 \, \text{J/g \textdegree C}}\\\\\Delta T = \frac{2500 \, \text{J}}{208.8 \, \text{J/°C}} \approx 11.97 \textdegree C[/tex]
Add this change to the initial temperature of 30°C:
Final temperature = 30°C + 11.97°C = 41.97°C
Therefore, the final temperature of the benzene after adding 2500 J of energy is 41.97°C.
What is the half-life of an isotope that decays to 6.25% of its original activity in 18.9 hours?
The half-life of an isotope that decays to 6.25% of its original activity in 18.9 hours is 4.725 hours. This is calculated by understanding that the isotope undergoes 4 half-lives to reach the 6.25% activity.
Explanation:The half-life (T1/2) of a radioactive isotope refers to the time period for half of the original nuclei to decay. In this case, the isotope decays to 6.25% of its original activity in 18.9 hours which means it goes through 4 half-lives (since (1/2)^4 = 1/16 which approximately equals 6.25%). Hence, the half-life of this isotope is 18.9/4 = 4.725 hours.
This concept is derived from the exponential decay of unstable radioisotopes where half-life (T1/2) is calculated by dividing the total time by number of half-lives.
Learn more about Half-Life here:https://brainly.com/question/24710827
#SPJ3
What is the molarity of a solution that contains 20.45 g of sodium chloride (NaCl) dissolved in 700.0 mL of solution?
How are elements with similar properties displayed in the periodic table?
What type of wave is sound?
a.longitudinal
b.surface
c.light
d.transverse
Reacting 35.4 ml of 0.220 m agno3 with 52.0 ml of 0.420 m k2cro4 results in what mass of solid formed
When an arrhenius base is dissolved in h2o, the only negative ion present in the solution is?
Calculate the mass of agcl that should be produced when an excess of agno3 is reacted with 500 mg
What are silicates? what are silicates? silicates are extended arrays of silicon and nitrogen. they are the most common network covalent atomic solids. silicates are extended arrays of sulfur and oxygen. they are the most common network covalent atomic solids. silicates are extended arrays of silicon and oxygen. they are the most common network covalent atomic solids. silicates are extended arrays of silicon and oxygen. they are the least common network ionic atomic solids?
Answer:
silicates are extended arrays of silicon and oxygen.
Explanation:
By definition, a silicate is a compound consisting of the chemical elements silicon (Si) and oxygen (O), derived from salicylic acid, which may be a salt or an ester. Of this group stand out the silicates formed by the alkali metals, constituent elements of Family IA of the periodic table, which are lithium (Li), sodium (Na), potassium (K), rubidium (Rb), cesium (Cs) and francium. (Fr), as these are water soluble and have various applications in industry and the laboratory. This list excludes the last two elements mentioned, due to their high molecular weight and their radioactivity. It is also relevant to report that salicylic acid is one of the derivatives of the second most abundant chemical element in the earth's crust, of the order of 27%, silicon (Si).
Which determines whether the fire will have open flames?
Question 4 options:
flash point
fuel-air mix
exothermic energy
type of fuel
what temperature does blood boil at (in Celsius Kelvin and Fahrenheit)
Blood boils at a temperature close to water's boiling point: 100°C, 373 K, or 212°F. This boiling point slightly varies due to dissolved substances. Understanding these values illustrates the relationship among different temperature scales.
When considering the temperature at which blood boils, it primarily depends on its composition, but generally, it is close to the boiling point of water. The boiling point of water is an important reference and is commonly known for each temperature scale:
Celsius (°C): Water boils at 100°C.Kelvin (K): Water boils at 373 K.Fahrenheit (°F): Water boils at 212°F.Human blood is mostly water, and hence its boiling point is similarly close; however, due to the presence of dissolved proteins, salts, and other substances, the exact boiling point may slightly vary. At normal atmospheric pressure, it is approximately 100°C (373 K or 212°F). This concept is an important illustration of the relationship among the temperature scales.
The half-life of a certain tranquilizer in the bloodstream is 5050 hours. how long will it take for the drug to decay to 8686% of the original dosage? use the exponential decay model, upper a equals upper a 0 e superscript kta=a0ekt, to solve.
If generating a key for this data, what is the correct sequence from bottom to top?
Generating a key from bottom to top signifies rearranging data in a particular order, often used in sorting or indexing processes. The actual sequence depends on the set rules, such as alphabetically or numerically.
Explanation:The correct sequence from bottom to top when generating a key for data, generally implies rearranging the data in a specific order. Let's consider a scenario in which we have data items named A, B, C, and D from bottom to top. In this case, the correct sequence from bottom to top might be D, C, B, A, assuming we're ordering in reverse-alphabetical order. However, the exact sequence can depend on the specific criteria or rules you're using to generate the key.
These keys are often used in computer operations such as sorting and indexing to manage and locate data efficiently. It's always important to understand the specific context in which the key is being applied for an accurate sequence.
Learn more about Key Generation here:https://brainly.com/question/33385922
#SPJ3
If hexane (c6h14), octane (c8h18), and octanol (c8h17oh) are heated evenly at different altitudes, rank them according to the order in which you would expect them to begin boiling.
An analogy to define the term half-life?
Consider the rate law below.
What effect does doubling the concentration of each reactant have on the rate? The rate increases to two times the original rate. The rate increases to four times the original rate. The rate increases to six times the original rate. The rate increases to eight times the original rate.
The "gas" that was used in ww i contained phosgene. into what corrosive chemical was this gas changed when it met with the moisture in the lungs
A 10.0ml sample of calcium hydroxide solution requirewd 26.85ml of 0.225 m hydrochoric acid for neutralization. calculate the nolar concentration of the bsae
To calculate the molar concentration of the base, use stoichiometry and the given volume and concentration of the acid. The balanced chemical equation helps determine the moles of acid and base. Divide the moles of base by the volume of the base solution to find the molar concentration.
Explanation:To calculate the molar concentration of the base, we can use the stoichiometry of the neutralization reaction between calcium hydroxide (Ca(OH)2) and hydrochloric acid (HCl). The balanced chemical equation for this reaction is:
Ca(OH)2 + 2HCl → CaCl2 + 2H2O
From the equation, we can see that 1 mole of Ca(OH)2 reacts with 2 moles of HCl. We are given that 26.85 mL of 0.225 M HCl is required to neutralize a 10.0 mL solution of Ca(OH)2. The moles of HCl can be calculated using the equation:
moles of HCl = volume of HCl (L) × concentration of HCl (M)
Once we have the moles of HCl, we can use the stoichiometry of the reaction to calculate the moles of Ca(OH)2. Finally, we divide the moles of Ca(OH)2 by the volume of the Ca(OH)2 solution to find the molar concentration.
Learn more about Calculating molar concentration of a base here:https://brainly.com/question/31318951
#SPJ3
where are the most reactive nonmetals located on the periodic table?
a. the second column from the right side of the table
b. the uppermost complete row of the table
c. the column at the far left side of the table
d. the rows at the bottom of the table connecting two sections
The most reactive nonmetals are found in the column second from the right side of the periodic table, also known as Group 17 or the halogens. They are highly reactive because they need to gain just one electron to complete their outer electron shell. Fluorine is the most reactive nonmetal.
Explanation:The most reactive nonmetals are located in the upper right section of the periodic table, in the column that is second from the right side. This column is known as Group 17, or the halogens. Halogens are highly reactive due to their propensity to gain an electron to fill their outer electron shells, and they exhibit rich variety of chemical behaviors.
Elements belonging to the same column or group, such as the halogens, share many chemical characteristics because they have the same number of valence electrons.
Learn more about Most Reactive Nonmetals here:https://brainly.com/question/14183621
#SPJ12
A) most reactions involve bond breaking and bond making. this equation shows what happens when methane (ch4) burns in oxygen (o2). mark the bonds broken in blue and the bonds formed in red.\
When CH₄ burns with the presence of O₂, CO₂ and H₂O are formed as the products. The balanced equation is;
CH₄ + 2O₂ → CO₂ + 2H₂O
When the reaction happens, 4 C-H bonds of CH₄ and O=O bond of O₂ are broken down to form 2 C=O bonds in CO₂ and 2 O-H bonds in H₂O.
The broken and formed bonds are marked in the image.
Question 13 unsaved the nonmetals in groups 5a, 6a, and 7a: question 13 options: lose electrons when they form ions. form ions with charges of 3-, 2-, and 1-, respectively. form positively charged ions. form ions with a numerical charge equal to their group number.
How does the law of conservation of mass apply to this reaction: C2H4 + O2 → H2O + CO2?
List a few ways that would lead you to believe a chemical reaction has occurred
In order for plants to go through photosynthesis, they must use
A. X rays.
B. visible light.
C. infrared rays.
D. ultraviolet light.
Relating ideas explain why ionic crystals melt at much higher temperatures than typical covalent molecular crystals.
Amino acids are monomers that join together in complex macromolecules called _____.
A.
phospholipids
B.
proteins
C.
carbohydrates
D.
polysaccharides
Amino acids combine to form complex macromolecules called proteins. Other listed macromolecules - phospholipids, carbohydrates, and polysaccharides - are not made from amino acids.
Explanation:Amino acids are the building blocks of proteins. They join together in a specific sequence to form these complex macromolecules. In the list provided, the correct answer is 'B. Proteins'. This is because phospholipids, carbohydrates, and polysaccharides are different types of macromolecules constructed from other monomers, not amino acids. The resulting protein structure determines its function in an organism.
Learn more about amino acids and proteins here:https://brainly.com/question/36384706
#SPJ6
Which element is likely to be chemically unreactive? krypton (8 valence electrons) rubidium (1 valence electron) silicon (4 valence electrons) magnesium (2 valence electrons) bromine (7 valence electrons)?
Which one of these elements is an alkaline earth metal
Write a general word equation for a neutralization reaction.
Final answer:
In a neutralization reaction, an acid reacts with a base to form salt and water, and the net ionic equation for this reaction usually involves hydrogen ions from the acid joining with hydroxide ions from the base to form water.
Explanation:
A general word equation for a neutralization reaction is: Acid + Base → Salt + Water
During neutralization, the hydrogen ions from the acid react with the hydroxide ions from the base to form water. The remaining ions (from the acid and base) then combine to form a salt. If we consider the neutralization of a strong acid with an ionic hydroxide, the net ionic equation simplifies to:
H3O+ (aq) + OH−(aq) → 2H2O(l)
This equation represents the concentration of hydrogen ions from the acid reacting with hydroxide ions from the base, simplifying down to just the formation of water since strong acids completely dissociate in water.
Nuclear power plants produce a waste product of cesium-137, which has a half-life of 30 years. how long would it take for the cesium to decay to 1/8 of its original amount?
Answer:
90 years
Explanation:
it takes three halves of one to get to 1/8.
So 30 times 3 = 90
How many grams of titanium (Ti, 47.90 g/mol) are in an instrument gear with 5.74x10^22 atoms of Ti
Answer:
Grams of Ti = 4.56 g
Explanation:
Given:
# atoms of Titanium = 5.74*10²²
To determine:
The mass of Ti in corresponding to the given number of atoms
Explanation:
1 mole of any substance contains Avogadro's number of atoms.
i.e. 1 mole of Ti = 6.023*10²³ atoms
Since 1 mole Ti = 47.90g,
47.90 g of Ti contains 6.023*10²³ atoms
Therefore, [tex]= \frac{5.74*10^{22} atoms*47.90g}{6.023*10^{23} atoms} =4.56\ g[/tex] of Ti would correspond to: