Answer:
The amount of KNO3 that can dissolve in water increases as temperature increases
Explanation:
Study island
As temperature rises, all three solutes become more soluble. The greatest significant increase in solubility is seen with potassium nitrate, which goes from about 30 g per 100 g water to over 200 g per 100 g water. Sodium chloride's solubility virtually ever varies.
What affect the solubility by increasing the temperature?The average kinetic energy of the solute molecules increases along with the solution's temperature.
As a result, the molecules have a lower ability to bind together and dissolve more easily. When temperature rises, solid states become more soluble.
Because some heat is dissipated during the dissolving process, the tension is reduced. Therefore, as the temperature rises, so does the solubility (concentration).
Therefore, Temperature increases cause an increase in the amount of KNO3 that can dissolve in water.
Learn more about solubility here:
https://brainly.com/question/19480276
#SPJ2
Give three situations where the negative staining procedure would be used.
Answer:
3 situations
Explanation:
1- organisms that are delicate and can't be heat-fixed so for that kind of organism negative staining technique is used.
2- for studying morphology. In the identification of the organism where it's structure, shape, size, and arrangement is important this technique used.
3- this technique, also used for capsular strain or organism identification.
For this question, look at the hydrologic cycle diagram.
Which number represents runoff on this diagram?
A) 1
B) 2
C) 3
D) 4
The correct answer is D) 4.
Runoff is one of the event that occurs during water cycle. During runoff water flows over land as surface instead of being absorbed into the ground. Runoff may be the part of rain, melting of snow or water by irrigation water and amount of runoff depends on vegetation, use of land and amount of nutrients in the soil.
what is often used as a thickening agent in foods?
____ take longer to decompose so they need to be finely cut
A. Woodcuttings
B. Food produces
C. Vegetable peels
D. Eggshells
Final answer:
Woodcuttings (A) take longer to decompose because of their tough wood fibers, which are difficult for decomposers to break down. Finely cutting them can speed up the process by increasing the surface area available to decomposers like fungi and bacteria that recycle nutrients into the environment.
Explanation:
The option that takes longer to decompose so they need to be finely cut is A. Woodcuttings. Woodcuttings are composed of tough wood fibers, which are difficult for decomposers such as bacteria and fungi to break down. As mentioned, forest mushrooms, though they appear fragile, perform the vital role of decomposing dead wood and other plant material that is typically tougher to break down compared to food produce, vegetable peels, or eggshells.
Decomposers, which include fungi and bacteria, have the important task of recycling nutrients by breaking down complex organic matter into simpler inorganic nutrients. This enables producers to utilize the released nutrients to create new organic compounds. Organic substances that can be disintegrated by decomposers are termed biodegradable.
Woodcuttings being larger and more complex than other organic materials means they require more time and effort for decomposition. Hence, cutting them into finer pieces increases the surface area accessible to the decomposers, thereby speeding up the decomposition process.
Why is a symptomless STI just as dangerous as an STI that exhibits symptoms? Explain your answer.
Which line graph matches the trend in this scatterplot?
Answer:
Negative correlation
y= -5x +25
Explanation:
The scatter plot shows a negative correlation between time (years) and the number of Sumatran tigers, that is, the population is decreasing.
In order to find an equation for the trend line, apply two points from the plot to the general equation for straight lines:
[tex]y-y_{0}=m(x-x_{0})\\25-0=m(0-5)\\m=-5\\y-25 = -5(x - 0)\\y= -5x +25[/tex]
the early Paleocene world was slightly ____ then the proceeding Cretaceous period
cooler
warmer
less evolved
none of the above
The answer is 'cooler'. The Cretaceous Period was relatively warm and was experiencing global warming. However, a cooling trend was evident towards the end of the Cretaceous. The Paleocene followed the meteorite impact that resulted in the extinction of most of the dinosaurs. It is thought that dust particles in the atmosphere resulted in cooling during the early Paleocene.
what does a plant do with oxygen, the end result of photsynthesis
A. Sends it into the dirt
B. Breathes it into its lungs
C. Releases it that Animals(including humans) can live
D. Turn it into sunlight
What is most likely evidence of an energy transformation taking place when a hot plate that has a beaker containing solid wax placed on it is turned on
Answer:
melting point and heat transfer
Answer: A - "Wax starts melting as kinetic energy is transformed into thermal energy"
Explanation:
I took the test
1.) If a sailing ship represents the human body, how is a sudden storm at sea like a virus? Use the word homeostasis
2.) If the wind changes direction, and the ship veers off course, what type of feedback loop results in the ship returning to its course?
1.Which bright solar feature is shown in the picture above?
Solar flare
Prominence
Sunspot
Convection zone
(Use image 2)
2.Which layer of the sun is responsible for producing the light shown in the picture above?
Radiative zone
Convective zone
Photosphere
Chromosphere
(Use image 1)
1. The bright solar feature shown in the picture is a solar flare.
A solar flare lasts for few minutes to an hour. When magnetic energy which is built up suddenly releases, a bright flare can be observed. This event may not cause loss of mass but large amount of electromagnetic radiation is emitted. A sudden rise in brightness can be observed.
2. The layer of the Sun that is responsible for Solar flares is Photosphere.
It is the atmosphere of Sun. It has granules of plasma and cooler regions called sunspots.
Its α sФlar flαr∈ β∈cα∪s∈ αccФrding to NASA thαt pictur∈ shФws a mid-sФlar flαr∈
Smog is a form of ______ . It is made of _____ and fog.
Smog is a form of severe air pollution. This is made up of smoke and fog and hence called as Smog.
It was coined in the 20th century as blending of the word smoke and fog. This is a condition in which the air pollution is visible and is composed of nitrogen and sulfur oxides, smoke, ozone and some other pollutants.
Man made smog is caused due to pollution caused by vehicles and industrial emission and photo chemical reactions that is caused due to these emissions.
the energy role of a grizzly bear is that of a {n} ------because it cannot make its own food
Answer:
The answer is Consumer just took the test Hope this helps! Have a great day!
why do phospholipids form a bilayer in water?
Answer:
Phospholipids form a bilayer in water because lipid consists of hydrophillic and hydrophobic regions.
Explanation:
Lipid is known as amphipathic molecule because lipids has hydrophillic head and hydrophobic tail regions. The lipid molecules can rearrange themselves when they are dissolved in water.
Lipids when dissolve in water, the hydrophillic (water- loving) head interact with water whereas hydrophobic( water- hating) moves away from the water. This, makes the bilayer in water.
Which of the following correctly describes the difference between transcription and translation?
-Transcription makes RNA from DNA, translation turns RNA into proteins
-translation copies new DNA, while transcription makes RNA
-translation makes mRNA while transcription makes tRNA
-Translation makes RNA from DNA, transcription turns RNA into proteins
Answer:
Transcription makes RNA from DNA, translation turns RNA into proteins.
Explanation:
Transcription is the first stage in gene expression in which an RNA molecule is made by copying a gene's DNA sequence. Transcription is carried out by the enzyme RNA polymerase which joins nucleotides together to make an RNA strand, while translation is also a process in gene expression in which messenger RNA (mRNA) is decoded within a ribosome to build a chain of amino acids which later folds to form an active protein. Translation occurs after the process of transcription.
The cell membrane controls movement of materials into and out of the cell. The following particles are moving from high concentration to low concentration and are using a carrier protein. How would you describe this type of movement across the membrane?
The movement of particles from high concentration to low concentration gradient that uses a carrier protein is called Facilitated diffusion. In facilitated diffusion, the protein channels or carrier protein in the cell membranes allows the particles to move in or move out of the cell from high concentration down to their low concentration gradient.
The process in which particles move from high concentration to low concentration using a carrier protein is known as facilitated diffusion, a type of passive transport in the cell membrane.
Explanation:The type of movement described in the question, where particles move from an area of high concentration to low concentration using a carrier protein, is known as facilitated diffusion. Facilitated diffusion is a type of passive transport, meaning it does not require energy and occurs along the concentration gradient. The carrier proteins in the cell membrane bind to specific molecules and assist them in crossing the membrane, effectively 'facilitating' their diffusion into or out of the cell.
Learn more about Facilitated Diffusion here:https://brainly.com/question/32884792
Need Help Asap
Using the diagram above, match the description to the corresponding location in the carbon cycle model. Provide the letter only.
1. Carbon dioxide is converted to sugar used for food.
2. Carbon trapped in fossil fuels is converted to carbon dioxide.
3. Organic carbon is converted to fossil fuels.
4. Carbon dioxide is converted to carbonates.
5. Sugar is broken down and converted to carbon dioxide.
1. Location ________
2. Location ________
3. Location ________
4. Location ________
5. Location ________
1. Location is F.
2. Location is G.
3. Location is E.
4. Location is H.
5. Location is A.
What shared characteristic can be written at point X? Use complete sentences to explain your answer.
*4-5 COMPLETE SENTENCES
*NO COPYING
*ANY LESS THAN WHAT IS ASKED, WILL BE REPORTED.
Answer:
Multicellular
Eukaryotic
Heterotrophs
Explanation:
Both cells of fungi and animals are eukaryotic meaning they have nucleus and organelles. They are multicellular organisms (meaning they are composed of many cells). Their cells are also heterotrophic meaning they depend on organic molecules for energy as opposed to plants that can make their food from abiotic factors. Fungi, however, digest their molecules extracellularly while animals do it intracellularly.
11. What are the steps involved in DNA replication?
a. Replication begins when the DNA double helix ___.
b. The nitrogenous base pairs pull apart from each other at a ____, exposing the two strands.
c. As the double helix continues to open, new nitrogenous ____ are added on both sides.
Final answer:
The steps involved in DNA replication include the unwinding of the DNA helix, separation of base pairs by DNA Helicase at the replication fork, and the addition of new nitrogenous bases to form complementary strands.
Explanation:
The process of DNA replication is essential for cell division and involves several key steps:
Replication begins when the DNA helix unwinds at the origin of replication.The enzyme DNA Helicase breaks the hydrogen bonds between the nitrogenous base pairs which form at a replication fork, exposing the two single strands.As the double helix continues to open, single-strand binding proteins coat the DNA to prevent rewinding. New nitrogenous bases are added to the exposed strands by the enzyme DNA polymerase, according to the base pairing rules (A with T, and G with C).What is a light year?
a. A measure of time in space
b.The distance light travels in a year
c.The distance to Alpha Centauri
d.A term used only in science fiction
what are two ways that scientists have studied space debris as a possible origin of organic compounds on Earth? What did they discover in each case? (2 ) What is the evidence that the first life may have evolved around geothermal vents?
Which statement best explains a difference between the interaction of light with clear glass and the interaction of light with silver metal?
Light slows down when it interacts with glass but not when it interacts with metal.
Light slows down when it interacts with metal but not when it interacts with glass.
Most of the light passes through glass but none of the light passes through metal.
Most of the light is absorbed by glass but none of the light is absorbed by metal.
The correct answer is option C
When a ray of light is incident on clear glass and silver metal then most of the light is transmitted through the clear glass and none of the light passes through the silver metal.
This is so because the clear glass is a transparent substance and silver metal is a opaque and no light can pass through it.
The light gets transmitted through the clear glass and the light gets reflected back which strikes the metal surface.
Which living organism processes nitrogen in the atmosphere and makes it available to other living forms in a usable form?
Answer:
Bacteria.
Hope this helps!!!
Where trenches do not exist, the steep continental slope merges into a more gradual incline known as the continental ____. a abyss b zone c rift d rise
What happens to the water particles in a wave?
The wave pushes the water particles forward.
The water particles move in a circular pattern.
The wind pushes the water particles down.
The water particles move up through the wave.
The water particles move in a circular pattern in a wave. Hence, the correct option is B.
What is a water wave?Water waves are the surface waves that are a combination of both longitudinal and transverse wave.
During the distortion, the water particles remain in the same position as they propagate with the same wave. They are formed by the interaction between the sun, moon, and the earth. They are also very important in nature, the wind moving above the water surface are also responsible for the formation of water waves.
There are basically three types of water waves: sea waves of seismic origin (tsunamis), swell waves, and wind surges. Hence, the correct option is B.
For more details regarding water waves, visit:
https://brainly.com/question/16881855
#SPJ6
how are the anthers and pollen grain adapted for distributing pollen?
If the genotype for a trait is hybrid, the trait expressed will be-
A. Recessive
B. Dominant
C. Purebred
D. Homozygous
In pea plants, yellow seed color is dominant and green seed color is recessive. What will the generations look like? Assume that Mendel’s method of crossing two true breeding parents with opposite traits is followed. Check all that apply.
The P generation has all yellow seeds.
The P generation has all green seeds.
The P generation has yellow and green seeds.
The F1 generation has yellow and green seeds.
The F1 generation has all yellow seeds.
The F2 generation has all green seeds.
The F2 generation has yellow and green seeds.
There are yellow and green seeds in the P generation. The F1 generation's seeds are all yellow, while the F2 generation's seeds are both yellow and green.
Is Mendel's peas' predominant seed color green or yellow?Green seed color is the recessive trait and yellow seed color is the dominant trait in pea plants. The outcomes of a cross between a heterozygous yellow-seed plant and a green-seed plant can be displayed using a Punnett square.
(Predominant) seeds with a yellow tint and green seeds (recessive)
Parental generation (P generation): In Mendel's experiments.
F1 generation of yellow seeds: In Mendel's tests, the P generation's progeny
In Mendel's trials, the progeny of the F1 generation were of the yellow and green seed colors, respectively.
To know more about Mendel’s method visit:-
https://brainly.com/question/2152309
#SPJ1
In Mendel's pea plant experiments, the P generation of true-breeding parents results in all yellow seeds if crossed with each other, the F1 generation from parents with opposite traits has all yellow seeds due to the dominance of yellow, and the F2 generation has both yellow and green seeds, typically in a 3:1 ratio.
In the study of pea plants, where yellow seed color is dominant and green seed color is recessive, Mendel's method of crossing would result in specific patterns across generations:
1. The P generation would consist of plants that are true-breeding for yellow and green seeds. Since yellow is dominant, the P generation would have all yellow seeds if both parents are homozygous for yellow, or all green seeds if both are homozygous for green. However, if they are crossed with each other (yellow x green), all yellow seeds would be present due to the dominance of the yellow trait.
2. The F1 generation, which results from crossing two true-breeding parents with the opposite traits (homozygous dominant for yellow and homozygous recessive for green), would have all yellow seeds given the dominance of the yellow allele.
3. The F2 generation would exhibit both yellow and green seeds due to the segregation of the alleles during gamete formation and the subsequent combination of the F1 heterozygotes' gametes. A Punnett square can be used to predict the specific ratio of yellow to green seeds in this generation, usually a 3:1 ratio, assuming Mendel's laws of inheritance are followed.
Biuret solution specifically reacts with ____ to produce a color change.
A. DNA
B. Lipids
C. Amino Acids
D. Starches
Answer:
C. Amino Acids
Explanation:
The biuret solution is often used for the detection of proteins.Every protein is made up of monomers known as amino acids and hence the biuret solution reacts with the amino acids leading to a color change which indicates the presence of proteins in the sample. The biuret solution contains :Hydrated Copper sulfate
Potassium hydroxide solution
Potassium sodium tartrate
Which of these best describes the material inside Earth's mantle? Remains stationary Moves in a circular motion Rises up but does not sink down Sinks down but does not rise up