scientist who discovered that arms contain an electric charge

The displacement of the rock will be the same as the total horizontal distance traveled. Here the rock's horizontal position is given by

[tex]x=\left(15\,\dfrac{\mathrm m}{\mathrm s}\right)\cos30^\circ\,t[/tex]

so to find the horizontal distance it traversed, we need to know the time it took for the rock to return to the ground. We use the rock's vertical position over time to figure that out:

[tex]y=\left(15\,\dfrac{\mathrm m}{\mathrm s}\right)\sin30^\circ\,t-\dfrac g2t^2=0[/tex]

where [tex]g=9.8\,\dfrac{\mathrm m}{\mathrm s^2}[/tex] is the acceleration due to gravity. Then we find that [tex]t\approx1.5\,\mathrm s[/tex], at which point we find [tex]x\approx20\,\mathrm m[/tex].

The 'slope' of the road is (rise between two points) / (hotizontal distance between the same two points).  Or (rise)/(run).  It's also the tangent of the angle between the horizontal and the incline.

In this problem, your 'run' is 2.4 km, and the 'rise' is 160 m.

The slope of the incline is (160) / (2,400) .

That's 0.0667 .

To answer the question, you need to find the ANGLE whose tangent is that same number.

If your calculator has ANY functions on it, then " tan⁻¹ " is the one you want.  Key in a number, and " tan⁻¹ " will give you the angle whose tangent is that number.

The angle of the road above the horizontal is found using trigonometry, specifically the tangent function, which is the ratio of the elevation gain to the distance traveled along the road. By applying the arctan function to 160m/2400m, we can calculate the angle of inclination in degrees.

The question involves finding the angle of the road above the horizontal when the elevation change and the distance traveled along the road are known. This requires the use of trigonometry to determine the angle, given the rise (elevation change) and run (distance traveled along the road).

To find the angle, we can use the tangent function, which is the ratio of the opposite side to the adjacent side in a right triangle. In this scenario, the rise is 160 m and the run is 2400 m (2.4 km). We need to convert the run into meters to match the units of the rise, making the run 2400 m.

Now we compute the angle θ:

Once we calculate the arctan(1/15), we will get the angle of inclination of the road in degrees.

Answer:

Explanation:

The epithelial tissues cover the body surfaces, forms a lining over the body cavities and hollow organs. These tissues also forms a protective barrier between the external environment and the body.

The epithelial tissues are the tissues which performs various functions. These tissues are composed of cells that are laid close to each other with the cells that lies in the close association with each other. The structure and function of the epithelial cells vary from both upper and lower surfaces. Due to variety in the functions of the epithelial tissues like protection, secretion, cellular transportation, filtration, selective absorption and sensing, these are called as the versatile tissues.

Let the salmon jump with speed v at an angle of 33.3 degree

So here we can find out the components of his velocity in x and y direction

[tex]v_x = v cos33.2[/tex]

[tex]v_y = v sin33.2[/tex]

now the horizontal displacement of the salmon is 3.15 m so he cover this horizontal distance with constant speed as there is no acceleration in x direction

here we can say

[tex]v_x * t = 3.15[/tex]

[tex]v cos33.2 * t = 3.15[/tex]

[tex]v*t = 3.76[/tex]

now in Y direction it is an accelerated motion as it is accelerated due to gravity

[tex]y = v_y * t + \frac{1}{2}at^2[/tex]

[tex]-0.45 = v sin33.2* t - \frac{1}{2}*9.8* t^2[/tex]

now we will plug in v*t = 3.76

[tex]-0.45 = 3.76 * sin33.2 - 4.9 * t^2[/tex]

[tex]4.9 t^2 = 2.51[/tex]

[tex]t^2 = 0.512[/tex]

[tex]t = 0.72 s[/tex]

now speed v is given by equation above

[tex]v*t = 3.76[/tex]

[tex]v*0.72 = 3.76[/tex]

[tex]v = 5.25 m/s[/tex]

so here he must have to jump with minimum speed of 5.25 m/s

• Objects “fall” toward the center of Earth.  (TRUE)

Since the gravitational force between earth and any object is always along the line joining the centers of two so all the objects near the surface of earth will always feel force towards the centre of the earth due to gravity.

• Objects are pulled by Earth but do not pull on Earth.  (FALSE)

Since gravitational force will always follow Newton's III law as per which every action has equal and opposite reaction force so object near the surface of earth will also pull the earth as earth is pulling the object towards the center.

• Objects accelerate at a rate of 9.8 m/s each second.  (TRUE)

Since acceleration due to gravity of Earth is 9.8 m/s^2 so here we can say that all objects near the surface of earth will accelerate towards the center of earth at rate of 9.8 m/s^2 due to gravitational pull.

• Objects travel at a rate of 9.8 m/s to are the center of Earth. (FALSE)

Since earth is pulling all objects near its surface with gravitational force so objects can not move at constant speed but it will move with constant acceleration.

• Objects are pulled by Earth more strongly than they pull on Earth. (FALSE)

Since gravitational force will always follow Newton's III law which say every action has equal and opposite reaction so we can say that force due to all objects on earth will be same as the force of earth on the object.

Latent heat is related to changes in phase between liquids ,gases and solids.

Sensible heat is related to changes in temperature of a gas or object with no change in phase.

Answer

6.6 km

The description of the problem is shown in the attached figure, where the line "d" represents the final displacement vector.

First, the trekker walked 3.3km in a 40 ° direction, as shown in the figure. We can write this vector in its Cartesian coordinates:

[tex]-3.3sin (40)x + 3.3cos (40)y[/tex]

Then the hiker walked 3.4 km in a 60 degree northwest direction.

We can write this as a vector in its Cartesian coordinates:

[tex]-3.4sin (60)x + 3.4cos (60)y[/tex].

When adding this two vectors we will obtain the final displacement "d"

[tex]d = [- 3.3sin(40) -3.4sin (60)]x + [3.3cos(40) + 3.3cos (60)]y\\[/tex]

[tex]d = -5.07x +4.23y\\[/tex]

To obtain the magnitude of this vector we calculate its module:

[tex]\sqrt{5.07 ^2 +4.23 ^ 2}[/tex]

Then the magnitude of the final displacement was:

6.6 km

efficiency of the heat engine is calculated by the formula

[tex]\eta = 1- \frac{T_c}{T_h}[/tex]

here we know that

[tex]T_c [/tex] = cold temperature

[tex]T_h [/tex] = hot temperature

now we will find the efficiency of all

1) for W

[tex]\eta_1 = 1- \frac{T_c}{T_h}[/tex]

[tex]\eta_1 = 1- \frac{120}{620}[/tex]

[tex]\eta_1 = 0.806[/tex]

2) for X

[tex]\eta_2 = 1- \frac{T_c}{T_h}[/tex]

[tex]\eta_2 = 1- \frac{100}{840}[/tex]

[tex]\eta_2 = 0.88[/tex]

3) For Y

[tex]\eta_3 = 1- \frac{T_c}{T_h}[/tex]

[tex]\eta_3 = 1- \frac{300}{900}[/tex]

[tex]\eta_2 = 0.67[/tex]

4) for Z

[tex]\eta_4 = 1- \frac{T_c}{T_h}[/tex]

[tex]\eta_4 = 1- \frac{25}{500}[/tex]

[tex]\eta_4 = 0.95[/tex]

So here most efficient engine is Z and least is Y

so we can arrange it as

Z > X > W > Y

so 3rd option is correct here

Answer:

C.) Z, X,W, Y

10% of the income.

Answer:

20% of their income

Explanation:

I got a five on Plato

Let the salmon jump with speed v at an angle of 33.3 degree

So here we can find out the components of his velocity in x and y direction

[tex]v_x = v cos33.2[/tex]

[tex]v_y = v sin33.2[/tex]

now the horizontal displacement of the salmon is 3.15 m so he cover this horizontal distance with constant speed as there is no acceleration in x direction

here we can say

[tex]v_x * t = 3.15[/tex]

[tex]v cos33.2 * t = 3.15[/tex]

[tex]v*t = 3.76[/tex]

now in Y direction it is an accelerated motion as it is accelerated due to gravity

[tex]y = v_y * t + \frac{1}{2}at^2[/tex]

[tex]-0.45 = v sin33.2* t - \frac{1}{2}*9.8* t^2[/tex]

now we will plug in v*t = 3.76

[tex]-0.45 = 3.76 * sin33.2 - 4.9 * t^2[/tex]

[tex]4.9 t^2 = 2.51[/tex]

[tex]t^2 = 0.512[/tex]

[tex]t = 0.72 s[/tex]

now speed v is given by equation above

[tex]v*t = 3.76[/tex]

[tex]v*0.72 = 3.76[/tex]

[tex]v = 5.25 m/s[/tex]

so here he must have to jump with minimum speed of 5.25 m/s

We are standing still inside an elevator

So our speed in the frame of elevator is zero

we can write this relative speed as

[tex]v_{pE} = v_p - v_E[/tex]

also we know that speed of the elevator is 55 mph

[tex]v_E = 55 mph[/tex]

now the velocity in relative frame is zero as he is  still in the moving elevator while in the ground frame or observing from the ground its velocity will be same as velocity of elevator.

So whenever an object is at rest in a moving frame then its relative velocity with respect to that frame must be ZERO

Answer: A sealed calorimeter is a closed system because thermal energy is not transferred to the environment.

A closed system is an isolated system where there is no transfer of energy with its surroundings. Also the system is not subjected to any external force whose source is external to the system.

Answer:C. Because thermal energy has not transferred to the environment.

Explanation:

Mass of the sound reflector is given as

[tex]m_1 = 170 kg[/tex]

mass of the chain itself is

[tex]m_2 = 8 kg[/tex]

now here since this system is suspended at rest and no acceleration is given for the system so in order to find the tension in the chain we will just use force balance equation

As per force balance we can say that weight of the chain and reflector downwards will be counter balanced by tension in the string

Now here we will have

[tex]T = m_1g + m_2g[/tex]

since chain is given with some mass so tension at the top end of the chain will be

[tex]T = 170* 9.8 + 8 * 9.8[/tex]

[tex]T = 1744.4 N[/tex]

So here tension in the chain will be 1744.4 N at the top end and this tension will decrease as we move down along the length of the chain.

C is the correct option

As momentum = (mass) (velocity)

P=mv

So the object having greater mass has less velocity and the object having smaller mass will move faster. But product of mass and velocity is same to each other.

When an electron is accelerated through potential difference then the speed that it attain will be explained by energy conservation

here by energy conservation we can say that

change in kinetic energy of electron = electrostatic potential energy gained through given potential difference

kinetic energy is given as

[tex]KE = \frac{1}{2}mv^2[/tex]

electrostatic potential energy is given as

[tex]PE = qV[/tex]

now by energy conservation

[tex]qV = \frac{1}{2}mv^2[/tex]

given that for electron

[tex]m = 9.1 * 10^{-31} kg[/tex]

[tex]v = 3 * 10^7 m/s[/tex]

[tex]q = 1.6 * 10^{-19} C[/tex]

now by plug in values

[tex]1.6 * 10^{-19} * V = \frac{1}{2}*9.1* 10^{-31} *(3*10^7)^2[/tex]

[tex]V = \frac{4.095 * 10^{-16}}{1.6 * 10^{-19}}[/tex]

[tex]V = 2559.4 Volts[/tex]

So here it is accelerated through potential difference of 2559.4 Volts

The electric potential is 4100 V or 4.1kV.

We know that the kinetic energy of the moving electron is equal to the 1/2mv^2. On this basis, we can write;

1/2mv^2 = eV

Where;

m = mass of the electron

v = speed of the electron

V = potential of the electron

e = charge on the electron.

Hence;

V = 1/2mv^2 /e

V = 0.5 × 9.11 × 10^-31 × (3 × 10^7)^2/1.6 ×10^-19

V = 4100 V or 4.1kV

Learn more about electric potential:https://brainly.com/question/8139015

answer is C. dressing to protect hands

First write down all your known variables:

vi = 25m/s

a = 7.0m/s^2

t = 6.0s

vf = ?

Then choose the kinematic equation that relates all the variables and solve for the unknown variable:

vf = vi + at

vf = (25) + (7.0)(6.0)

vf = 67m/s

The final velocity of the motorcycle is 67m/s.

kangaroo is capable of jumping to a height of 2.62 m

It means it will reach maximum height of 2.62 m when it will jump off with some maximum capable speed from the ground

So here as it will reach to its maximum height the final speed of the kangaroo will be zero

and also we know that during the motion of kangaroo the acceleration of kangaroo is due to gravity which is given by g = 9.8 m/s^2

now we can use kinematics equation to find out take off speed

[tex]v_f^2 - v_i^2 = 2 a d[/tex]

here we know that

[tex]v_f = 0[/tex]

a = - 9.8 m/s^2

d = 2.62 m

now we will have

[tex]0^2 - v_i^2 = 2 * (-9.8)* 2.62[/tex]

[tex] - v_i^2 = - -51.352 [/tex]

[tex]v_i = \sqrt{51.352}[/tex]

[tex]v_i = 7.17 m/s[/tex]

so the take off speed of the kangaroo will be 7.17 m/s and correct answer is "option d"

Answer:

vi = 7.17 m/s

Explanation:

(4225 m2/s2)/(6 m/s2) = d

d = 704 m

Return to Problem 8

Given:

vi = 22.4 m/s

vf = 0 m/s

t = 2.55 s

Find:

d = ??

d = (vi + vf)/2 *t

d = (22.4 m/s + 0 m/s)/2 *2.55 s

d = (11.2 m/s)*2.55 s

d = 28.6 m

Return to Problem 9

Given:

a = -9.8 m/s2

vf = 0 m/s

d = 2.62 m

Find:

vi = ??

vf2 = vi2 + 2*a*d

(0 m/s)2 = vi2 + 2*(-9.8 m/s2)*(2.62 m)

0 m2/s2 = vi2 - 51.35 m2/s2

51.35 m2/s2 = vi2

vi = 7.17 m/s

Volume=0.09m³

Density=4000kg/m³

Force=?

Density=mass/volume ⇒mass=volume×density

m=0.09×4000=360kg

Force=mass×accelaration

F=360×9.8

F=3528N

Answer

3,528 N

Explanation

density = mass/volume

ρ = m/v

∴ m = ρv

      = 4000 × 0.09

        = 360 Kg

Weight is defined as the force that acts on  a body and is directed towards the center of the earth.

Weight = mass × acceleration due to gravity

W = mg          Where g = 9.8 m/s²

W = 360 × 9.8

  = 3,528 N

Its average would be 35km in 30 minutes Hope this helps :D

A) gravity is the attraction of any mass to any other other mass .

D) gravity is a force that exist between any two masses in the universe

both are ok ...

Scientific law is also known as natural law. It  imply a cause and effect between the observed elements and always apply under the same conditions .

Scientific law is a statement based on repeated experimental observations that describes some aspect of the Universe.

ANSWER:

Abseiling rope is tested beyond twice the maximum possible weight when in use because of safety purposes.

EXPLANATION:

Every rope has its elastic limit.Abseiling rope is used basically for climbing or descending purposes so this type of rope must be of quite good quality and  it must bear maximum possible weight. We test it  just to check the elastic limit of the rope so that the rope shouldnot increase its elastic limit and it doesnot break when we use it.

Forces are presented as straight arrows pointing in the direction they function  on the body.

The force arrows always points straight arrows.

The pet store would be the reference point because it is where he started and it will not move. Hope this helped.

The pet store would be the reference point because it is where he started motion and it will not move.

The phenomenon of an item changing its position with respect to time is known as motion in physics. In mathematics, displacement, distance, velocity, and acceleration are used to explain motion.

A reference point is a location or object that is used as a point of comparison to ascertain whether something is moving. When an object shifts in relation to a fixed point, it is said to be in motion. Good reference points are things that are fixed in relation to Earth, like a building, a tree, or a sign.

The pet store would be the reference point because it is where he started motion and it will not move.

To learn more about motion refer to the link:

brainly.com/question/22810476

#SPJ6

Here it is an application of Newton's III law

as we know by Newton's III law that every action has equal and opposite reaction

So here as we know that two boys jumps off the boat with different forces

from front side of the boat the boy jumps off with force 45 N which means as per Newton's III law if boy has a force of 45 N in forward direction then he must apply a reaction force on the boat in reverse direction of same magnitude

So boat must have an opposite force on front end with magnitude 45 N

Now similar way we can say

from back side of the boat the boy jumps off with force 60 N which means as per Newton's III law if boy has a force of 60 N in backward direction then he must apply a reaction force on the boat in reverse direction of same magnitude

So boat must have an opposite force on front end with magnitude 60 N

So here net force due to both jump on the boat is given by

[tex]F_{net} = F_1 - F_2[/tex]

[tex]F_{net} = 60 - 45[/tex]

[tex]F_{net} = 15 N[/tex]

so boat will have net force F = 15 N in forward direction due to both jumps

C. a windy and powerful storm system

C. a windy and powerful storm system

(A) The resistance of the block of aluminum is given by:

[tex]R=\frac{\rho L}{A}[/tex]

where

[tex]\rho[/tex] is the aluminum resistivity

L is the length of the cylinder

A is the cross-sectional area of the cylinder

We already know the aluminum resistivity ([tex]\rho=2.65 \cdot 10^{-8} \Omega m[/tex]) and the length of the cylinder (L=20 m), so we must find the cross-sectional area A, which is given by the difference between the area of the larger cylinder and the area of the radial hole:

[tex]A=\pi (R^2 -r^2)[/tex]

where [tex]R=2.5 cm=0.025 m[/tex] and [tex]r=20 mm=0.02 m[/tex] (assuming that the 20 mm removed radially refers to the radius of the hole).

Therefore, the cross-sectional area is

[tex]A=\pi ((0.025 m)^2-(0.020 m)^2)=7.06 \cdot 10^{-4} m^2[/tex]

Substituting into the initial formula of the resistance, we find:

[tex]R=\frac{\rho L}{A}=\frac{(2.65 \cdot 10^{-8} \Omega m)(20 m)}{7.06 \cdot 10^{-4} m^2}=7.51 \cdot 10^{-4} \Omega[/tex]

(B) The resistivity of the tungsten is [tex]\rho=5.6 \cdot 10^{-8} \Omega m[/tex], so a cylinder of tungsten of the same size would have a resistance of

[tex]R=\frac{\rho L}{A}=\frac{(5.6 \cdot 10^{-8} \Omega m)(20 m)}{7.06 \cdot 10^{-4} m^2}= 1.59 \cdot 10^{-3} \Omega[/tex]

The behaviour of the resistance versus temperature is given by:

[tex]R=R_0 (1 + \alpha \Delta T)[/tex]

where [tex]\alpha[/tex] is a coefficient that for aluminum is equal to [tex]\alpha = 0.004308[/tex], R0 is the resistance of the piece of aluminum we found at point (A), and R is the resistance of the tungsten. Re-arranging the formula and substituting, we find

[tex]\Delta T = \frac{R/R_0 -1}{\alpha}=\frac{\frac{1.59 \cdot 10^{-3} \Omega}{7.51 \cdot 10^{-4} \Omega}-1}{0.004308}=259.3^{\circ}C[/tex]

So, the temperature must increase by 259.3 degrees.

(C) The power dissipated is given by:

[tex]P=I^2 R[/tex]

where I=30 A is the current. Substituting the numbers into the formula, we find

[tex]P=(30 A)^2 (7.51 \cdot 10^{-4} \Omega)=0.68 W[/tex]