Answer: p waves, seismic activity, tsunami waves
Explanation:
An atom of the element zinc has an atomic number of 30 and a mass number of 65. How many protons does an uncharged zinc atom have?
the element zinc has 30 protons
Explanation:
Atomic number is the sum of all the number of protons present in an element. And, mass number is the sum of total number of both protons and neutrons present in an element.
When an atom is neutral in nature then its number of protons is equal to its number of electrons.
Since, it is given that atomic number of zinc is 30 so, it means that number of protons will also be 30.
Thus, we can conclude that there are 30 protons in an uncharged zinc atom.
Complete this sentence: The activities of enzymes depends on the __________, __________ conditions, and the __________ of the surroundings.
Answer:
The activities of enzyme depends on the temperature, ionic conditions and the pH of the surroundings.
Explanation:
Effect of temperature on enzymes
Enzymes show low level of functioning at lower temperatures. As the temperature is raised, the activity of the enzyme increases. The enzyme activity becomes optimal at a specific temperature. Beyond this temperature, the enzyme's activity rate starts to decline until it gets denatured.
Effect of ionic conditions on enzymes
Studies show that certain enzymes require some cations for functioning. But an increased amount of cations or anions can inhibit the functioning of the enzymes.
Effect of pH on enzymes
Each enzyme has an optimum pH at which it works best. If the pH is increased or lowered than this optimum pH, then the activity of the enzyme starts declining until it gets denatured. Most enzymes work best at pH 7.0
What human body system sends signals to glands in the endocrine system to release hormones?
A. circulatory system
B. excretory system
C. nervous system
D. digestive system
Answer:
a
Explanation:
How does the angle of sunlight affect the climate of each of the climate zones?
Sunlight angle shapes climate zones: shallow angles cause cold polar climates, varying angles lead to temperate fluctuations, direct angles create tropical heat, and changing angles result in arid extremes.
The angle of sunlight significantly influences the climate of each climate zone. In polar zones, where the angle is shallow, sunlight is spread over a larger area, resulting in lower temperatures. In temperate zones, varying angles across seasons cause temperature fluctuations. Near the equator, where sunlight strikes directly, tropical climates experience high temperatures.
Subtropical zones have consistent, intense sunlight, yielding warm climates. The angle's changing inclination in arid zones leads to extreme temperature shifts. Lastly, in high-altitude regions, steep angles result in cooler temperatures. Overall, sunlight angle affects the distribution of heat, playing a pivotal role in determining the temperature and characteristics of each climate zone.
To learn more about sunlight follow the link:
https://brainly.com/question/28782526
#SPJ3
Final answer:
The angle at which sunlight strikes Earth, influenced by its 23.5-degree axial tilt, results in the differing climate zones across the globe. Direct sunlight near the equator leads to a warmer climate, while increased reflection near the poles causes cooler conditions.
Explanation:
The angle of sunlight plays a critical role in shaping the climate of various zones on Earth. The Earth's 23.5-degree axial tilt leads to variations in sunlight exposure throughout the year. During the summer season in either hemisphere, the tilt is such that the Sun's rays hit the Earth at a more direct angle, leading to increased solar energy absorption and warmer temperatures.
Conversely, during the winter, the tilt causes the Sun's rays to strike the Earth at a sharper angle, resulting in less energy absorption and colder conditions. The regions closest to the equator receive the most direct sunlight, which leads to a warmer climate year-round. In contrast, the poles are characterized by an increased angle of incoming solar radiation, leading to more reflected sunlight and a cooler climate. The culmination of these factors influences the distribution of the Earth's climate zones.
What is the best description of the word ‘recessive’ as it is used in biology?
Answer: c an allele that is only express if two versions of it are present in a cell
Explanation:
help! will mark brainly!
Describe the factors that affect the paths of secondary succession.
Answer:
Human disturbances such as clear-cutting can also cause secondary succession. Some disturbances affect only a small area, like the local damage caused by a single tree falling in the forest, while others affect entire landscapes. These disturbances damage the ecosystem but leave soil and nutrients behind.
Explanation:
Trust me.
Compared to primary ecological succession, secondary ecological succession experiences less resource conflicts. In this succession process, the pioneer species also enjoy greater privileges.
What is secondary succession?Secondary succession starts with a lot of resource availability, primary succession starts with a crisis in resource availability. Major sources of plant energy include decomposing organic matter, inorganic salts, ions, humus, and other soil leftovers.
Pioneer species carry out the establishment or re-establishment process of the sterile or devastated ecosystems at the start of both primary and secondary successions.
Only plants and blue-green algae/cyanobacteria are the main succession's pioneer species; they are all "photo-auto-lithotrophs," or succession producers. Secondary succession pioneer species don't always have to be photo auto-lithotrophic.
Therefore, Compared to primary ecological succession, secondary ecological succession experiences less resource conflicts. In this succession process, the pioneer species also enjoy greater privileges.
To learn more about ecological succession, refer to the link:
https://brainly.com/question/12325701
#SPJ2
which of the following sentences is the best example of a hypothesis
a. UV radiation does not cause skin cancer.
b. chickens lay more eggs when they are happy.
c. why does the earth orbit around the sun?
d. how many types of organisms are there?
Answer:B
Explanation:
when i was in middle school they told us an hypothesis was an educated guess/outcome.
Answer:a
Explanation:I got it wrong on a test and then it showed what the answer was I listened to the other person on here but got it wrong
Cell structures that provide energy to the cell are called
Cell structures that provide energy to the cell are called mitochondria found in eukaryotic cells found in animals, plants, fungi, and many single-celled organisms
What are mitochondria and how does it provide energy to the cellMitochondria are specialized structures found in eukaryotic cells. They are often referred to as the "powerhouse" of the cell because they are responsible for producing most of the cell's energy in the form of ATP (adenosine triphosphate).
The process of energy production in mitochondria is called cellular respiration. It involves a series of chemical reactions that take place in the inner membrane and matrix of the mitochondria. During cellular respiration, glucose and other molecules are broken down to release energy. This energy is then used to produce ATP, which can be used by the cell for various function
Learn pre about Mitochondria onbrainly.com/question/869305
#SPJ6
Which of the following is NOT a unique property of water?
A) Surface tension
B) It’s powerful solvent
C)Ice is less dense than water
D)It only exists in liquid and solid form.
Surface tension is NOT a unique property of water. Option A
Properties of waterThe unique properties of water are as follows:
Water is polarWater is an excellent solventWater has high heat capacity.Water has high heat of vaporizationWater has cohesive and adhesive propertiesWater is less dense as a solid than as a liquid.Learn more about water:
https://brainly.com/question/10940682
Final answer:
Option D) 'It only exists in liquid and solid form' is NOT a unique property of water since water also exists as a gas (water vapor). The other options correctly describe water's high surface tension, its ability as a powerful solvent, and the lower density of ice compared to liquid water, all of which are unique properties of water.
Explanation:
The question asks which of the following is NOT a unique property of water. The options provided touch upon various characteristics of water, but the correct answer is D) It only exists in liquid and solid form. This statement is not true because water can also exist as a gas, namely water vapor. The other options represent some of the unique properties of water:
A) Surface tension: Water has a high surface tension, allowing it to form droplets and enabling insects like water striders to walk on its surface.
B) It's a powerful solvent: Water is known as the universal solvent due to its polarity, which allows it to dissolve many different substances.
C) Ice is less dense than water: This unique property is due to the hydrogen bonding in water, which causes ice to float in liquid water and is critical for sustaining aquatic life in cold environments.
By examining these properties, we can see that option D is the one that is not true about water.
Multiple Choice
1. All of the following are examples of remote
sensing except
a. AUVs.
b. ROVs.
c. satellites.
d. scuba.
All the following are examples of Remote sensing devices except scuba. So the correct option is D.
What are remote sensing devices?The devices that are used to study and analyze the characteristics of an area, object, or a specific phenomenon, without any direct contact are called remote sensing devices.
The observations made by remote sensing devices are used for various kinds of studies and purposes. For example, observations by a weather satellite can be used to predict the weather.
Other applications of remote sensing devices are the study of the environment, the study of natural hazards, mapping of land use, etc.
A remote sensing device needs two main components.
Platform - It acts as a carrier to fit the sensors of the remote signal. Sensors - These receive the electromagnetic radiation and cover it to the recorded signal.Thus, except a scuba, all the others are examples of remote sensing devices.
Therefore, the correct option is D.
Read more about remote sensing devices, here
https://brainly.com/question/10839378
#SPJ2
The Light Reaction begins in Photosystem 1.
True
True
False
Answer: False
Explanation:
The given statement is False.
The light reaction begins in photosystem 2 (PS2).
In the process of light reactions in photosynthesis energy is generated so that it can be use in the dark reactions.
During light reaction, water molecule breaks down into oxygen molecule and an electron. this free electron attains attains a higher energy level in the reaction center of photosystem 2. The state of an unstable electron undergoes an electron transport chain (ETC). The electron flows from PS2 to cytochrome and then to photosystem 1 (PS1). In PS1 the light-independent energy takes place where further electrons are transfered to NADPH.
When listing the levels of organization in organisms from smallest to most complex which level is just below organs in complexity?
6. Plants produce oxygen during photosynthesis. However, plants must also use atmospheric oxygen during the process of respiration.
Which can best bo concluded from this Information?
.. Plants undergo respiration through aerobic processes.
C. Plants use all of the oxygan they produce during respiration.
b. Plants undergo respiration through anaa robic processes.
d. Plants use the oxygen from carbon dioxide during respiration.
...
L
e
ela havala
LE
Answer:
Plants use the oxygen from carbon dioxide during respiration.
Please select the word from the list that best fits the definition
apparent movement of a star used to measure its distance from Earth
parallax
light-year
main sequence
H-R diagram
white dwarf
fusion
elliptical galaxy
barred spiral galaxy
irregular galaxy
Milky Way Galaxy
Answer: parallax is the best answer
Answer:
The correct answer is the option 1: Parallax
Explanation:
Parallax is the name given, in the field of physics, to the term that refers to the alternation or displacement in the apparent position of an object that is being watched between two different lines of sight and being measured at the same time by the angle of those two lines. In addition, that statement declares the well known ''principle of parallax'', which is used by the astronomers to measure large distances, such as the example of the question of the apparent movement of a star used to measure its distance from the Earth.
which organism is NOT made up of 1or more eukaryotic cells?
A.) a dog
B.)dandelion
C.)radiolarian
D.)methanogen
Answer:
D
Explanation:
Methanogens are prokaryotes and therefore have prokaryotic cells. They are single-celled archaea. They are found in hypoxic conditions like the first stomach of ruminants where they digest molecules like cellulose and produce methane as a byproduct. The rest are composed of eukaryotic cells which are much larger than prokaryotic cells and their organelles are membrane-bound (unlike prokaryotes).
What is the correct definition of speed?
Answer: Speed: the rate at which someone or something is able to move or operate.
Answer:
The speed is defined as the rate at which a particular object covers a certain amount of distance. This speed can be fast or slow. An object covering a great distance in short period of time indicates a high speed and an object covering small distance in a large period of time depicts a slow speed.
This can be mathematically calculated.
Speed= Distance/Time
The unit of speed is meter/second. It can also be written as m/sec.
When a honey bee stings or a pathogen attacks, the body elicits an inflammatory response. Label the processes that happen during an inflammatory response.
Answer:
Honey bee or pathogen attacks by penetrating chemical components in the body, eliciting inflammation.
Explanation:
Honey bee stings with the barbed stinger located at the end of its abdomen which penetrates the skin in order to inject the venom from his venom sac consisted of organic molecules and proteins. This can cause pain, swelling and inflammation.
The methanoic acid in its venom causes the inflammation. Pathogens penetrate mechanical components in plants that affect the mechanisms of the plant.
In food production, what is used to
(a)
regulate the growth and ripening of fruits
Answer: Ethylene Gas
Explanation: Ethylene Gas Can be Used to Regulate Fruit Ripening Ethylene is a gas and is known as the “fruit-ripening hormone.”
What is the role of the plasma membrane in facilitated diffusion & how is it different form osmosis?
Answer:
osmosis or diffusion. ... It is a process called facilitated diffusion. It could be simple as bringing in a glucose molecule. Since the cell membrane will not allow glucose to cross by diffusion, helpers are needed. Plasma , The primary function of the plasma membrane is to protect the cell from its surroundings.
is a process that’s absent in cellular respiration in anaerobic organisms but present in aerobic organisms. is a process that doesn’t require oxygen.
Answer:
The krebs cycle
Explanation:
Answer:
1. Krebs cycle, 2. Glycolysis
Explanation:
don't kn ow if the first one is correct but the second one is definitely correct.
a bacterial cell is 0.002 mm long. A magnified image of the cell is 18 mm long. What is the magnification?
The magnification of the bacterial cell image is 18 mm / 0.002 mm = 9000
What is the magnification?Magnification means how much bigger the image is compared to the object itself. In this situation, the picture of the tiny bacteria cell is zoomed in to be 9000 times bigger than it really is.
This means that if you were to use a microscope that makes things look 9000 times bigger, a bacterial cell would look like it is 18 mm long.
It is important to understand that making an image bigger does not make it clearer. Resolution means the skill to see the difference between two points that are very close together. To make an image clearer, use a microscope with a bigger number called numerical aperture (NA).
Learn more about bacterial cell magnification
https://brainly.com/question/20114435
#SPJ3
What are the main differences between plant and animal cells?
Animal cells have a large central vacuole.
Animal cells have rough endoplasmic reticulum.
Plant cells are more rigid due to the cell wall.
Plant cells have smooth endoplasmic reticulum.
Answer:
C
Explanation:
A difference between plant cells and animal cells is that most animal cells are round whereas most plant cells are rectangular.Plant cells have a rigid cell wall that surrounds the cell membrane
The main difference between plant and animal cells is option three, Plant cells are more rigid due to the cell wall.
There are many things that are different between plant and animal cells. Some things plants have that animal cells do not are:
Cell wallChloroplastsLarge central vacuolePlastidswhile animal cells have centrioles and lysosomes that plant cells do not have. However, both cell types have rough and smooth endoplasmic reticulum.
Plant cells have a cell wall that makes their cells more rigid, gives the cell more protection, and enables it to do many things. This cell wall is not found in animal cells. This is the main difference between plant and animal cells.
To learn more visit:
https://brainly.com/question/560579?referrer=searchResults
Describe the difference between negative and positive feedback mechanisms in
the body
a. Positive feedback increases the body's level of a variable while negative
feedback reduces the level of the variable
b. Positive feedback is good for the body and helps put the body back to homeostasis. Negative feedback occurs when there is a problem with the body
and it can't get back to homeostasis.
c. Negative feedback returns the body to its "normal" levels when it gets too high
or too low. Positive feedback continues to add to one side of the balance
making the change even greater.
d. Both negative and positive feedback loops work in the same way to help the
body maintain homeostasis.
Please only answer if you know the answer
Negative feedback helps achieve and maintain the set point within a system, acting as a control mechanism. In contrast, positive feedback lacks the controlling aspect and instead accelerates the direction of change. Hence, the correct option is c.
The primary difference between negative and positive feedback mechanisms in the body involves the system's response to changes. Negative feedback mechanisms work to maintain homeostasis by reversing the direction of a change when the levels of a variable become too high or too low. For example, the regulation of blood glucose levels through the release of insulin and glucagon is an instance of negative feedback: insulin lowers high blood glucose levels, while glucagon raises low blood glucose levels.
On the other hand, positive feedback mechanisms amplify the changes the system is undergoing, pushing it further away from its original state. These are less common because they could disrupt homeostasis, but they are normal and critical when there is a specific endpoint, such as during childbirth where the release of oxytocin intensifies contractions until delivery.
In short,
The effector of a feedback mechanism is usually which part of the body?
A) skin
B) brain
C) gland
D) stomach
Answer:
Your answer is B) Brain
Answer:
B) brain
Explanation:
Feedback mechanisms are actions capable of controlling the body's homeostasis (balance).
The brain has the main role in these processes, promoting antagonistic actions, dividing into positive and negative feedbacks, such as the increase or decrease in body temperature or blood glucose level, for example.
Positive feedbacks act to amplify actions that promote changes in the body, while negative feedback acts to reverse changes that have occurred. These are more common than the positive ones.
Describe the property of water that is indicated by the data. How is this property explained by the structure of water molecules and the bonds between them?
Water's cohesive property, which makes it stick together in drops, is due to its molecular structure that facilitates hydrogen bonding. The polarity of water molecules leads to the formation of hydrogen bonds, which makes water a structured liquid with high surface tension.
The Property of Cohesion in Water
The property of water indicated by the data is its cohesive nature. Water molecules exhibit a strong tendency to stick together, forming drops rather than existing as separate molecules. This behavior is most visible when observing water dripping from a leaky faucet or accumulating in dew drops.
The cohesive property of water is explained by the molecular structure of water, or H₂O. Each water molecule consists of one oxygen atom covalently bonded to two hydrogen atoms, creating a polar molecule with a partial negative charge on the oxygen and partial positive charges on the hydrogens. This polarity allows water molecules to form hydrogen bonds with each other, where the oxygen of one water molecule attracts the hydrogen of another. These bonds create a network that holds the molecules together, contributing to water's high surface tension and its ability to form drops.
Hydrogen Bonding in Water
Hydrogen bonding is the molecular structural feature responsible for many of water's unusual properties. The bond is relatively weak on its own, but when many hydrogen bonds form between water molecules, they collectively create a stable, structured liquid. This extensive hydrogen bonding is what gives water a high boiling point, high heat capacity, and the ability to dissolve numerous substances, which is why water is often called the 'universal solvent'.
In essence, the structure of water molecules and the network of hydrogen bonds between them are the keys to understanding why water behaves in such distinctive ways compared to other molecules of similar size.
Which kingdom does not classify autotrophic organisms?
Archaea
Eubacteria
Fungi
Protista
Answer:
Fungi, it's the only one that's not microscopic
Fungi, it's the only one that's not microscopic.
What are Autotrophic organisms?An organism that can make its own nourishment by the use of light, water, carbon dioxide, or other substances is an autotroph. Autotrophs are also referred to as producers because they make their own nourishment.
Although plants are the most well-known autotroph, there are numerous more types of autotrophic creatures. Algae, which are aquatic plants that are recognized by their larger forms as seaweed, are autotrophic.
The majority of autotrophs produce their food through a process known as photosynthesis. In photosynthesis, autotrophs use the sun's energy to turn carbon dioxide from the air and water from the soil into glucose, a nutrition.
Therefore, Fungi, it's the only one that's not microscopic.
To learn more about autotrophic organisms, refer to the link:
https://brainly.com/question/29477668
#SPJ6
what type of material is found in the atmosphere?
A. A mixture of magma and superheated water.
B. An incompressible fluid of molten rock
C. Solid Rock
D. A viscoelastic fluid of molten rock
Answer: D.) A viscoelastic fluid of molten rock
Explanation: The layer below the lithosphere , the upper layer of the mantle of the earth with high heat pressure .It is made up of almost solid rocks but also flows not which indicates that it consist of viscoelastic fluid of molten rocks.This is because in some regions there can be presence of molten rocks.
What makes the tea with milk and lemon curdle?
Answer:
The tea with milk and lemon curdles due to the acidic nature of lemon.
Explanation:
Milk is made up of a number of proteins like casein. The proteins in milk are denatured by the addition of lemon juice. When lemon juice is added to tea or milk, the proteins such as the negatively charged casein become neutralized. Now, as no negative charge is present on them so they start to crumple together rather then pushing each other apart. Hence, the clumping causes the milk to curdle in tea.
Answer:
because of the acidic nature of the lemon
Explanation:
Human population increased sharply during the _____ because of improvements in farming techniques.
A Hunter-gatherer period
B Agricultural revolution
C Period of prehistory
D Industrial Revolution
B. During the agricultural revolution, there were vital new improvements in farming techniques that made a sharp increase in human population.
Explanation:The agricultural revolution began in Great Britain between the mid-17th century and the late 19th century. It brought new crops and grains and also new methods of farming and agriculture. Good irrigation system and drainage facilities also helped to increase the productivity of the crops.
An immense increment in farming output and productivity during the agricultural revolution added to the growth of the population. The farming revolution made a surplus of nourishment, so fewer people started to die of starvation. Statistics demonstrate that the revolution of agriculture committed a global rise in population.