Suppose these waves represent the sound of a siren on a passing ambulance. Which wave represents the sound of the siren after it has passed you? Explain your answer.

The wave A has a higher frequency and wave B has a lower frequency.

I REALLY need help. Please.

Answers

Answer 1
The answer is wave B has a lower frequency.  Suppose these waves represent the sound of a siren on a passing ambulance. Wave B (lower frequency) represents the sound of the siren after it has passed you.  The ambulance moving towards the observer produces a higher than normal frequency, and the ambulance moving away produces a lower than normal frequency.
Answer 2

Answer:

The correct answer is "wave B has a lower frequency."

Explanation:

The Doppler effect is defined as the change in apparent frequency of a wave produced by the relative movement of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave movement when the sender and the receiver, or observer, move relative to each other.

This is the effect that occurs in this case. And it is explained as follows: When the ambulance approaches the observer, the wave "compresses", that is, the wavelength is short, the frequency high and, therefore, the tone of the perceived sound will be sharp. On the other hand, when the ambulance moves away from the observer, the wave "decompresses", that is, the wavelength is long and the frequency low.

Then the correct answer is "wave B has a lower frequency."


Related Questions


Plants use a process called cellular respiration in order to obtain energy from the food they produce during photosynthesis. When a plant undergoes cellular respiration, it...

Question 5 options:



produces sugar inside its cells.



breaks down the sugar inside its cells.



releases oxygen through its stomata.



absorbs sunlight through its chloroplasts.

Need IT ASAP

AND BRAINLYEST

Answers

Breaks down the sugar inside its cells.

what is the mass of an atom with seven protons.seven neutrons,and eight electrons?

Answers

Explanation:

It is given that the atom has 7 protons this means that atomic number of the atom is 7.

As we know that atomic mass of an atom is the sum of total number of protons and neutrons present in the atom.

So,       atomic mass of the given atom = no. of protons + no. of neutrons

                                                                = 7 + 7

                                                                 = 14

Thus, we can conclude that the mass of given atom is 14 g/mol.  

The mass of an atom with seven protons, seven neutrons, and eight electrons is 14 g

Given the following information from the question

Number of protons = 7 protons

Number of neutrons = 7 neutrons

Number of electrons = 8 electrons

The mass number of an atom is the sum of its atomic number and neutron number.

Mass number = number of neutron + atomic number

Since the atomic number of an element is equal to the number of protons of such elements, hence;

Mass number = 7 + 7

Mass number = 14 g

Hence the mass of an atom with seven protons, seven neutrons, and eight electrons is 14 g

Learn more here:

https://brainly.com/question/12550618

Which state(s) of matter have no definite shape or volume?

Answers

the physical forms in which a substance can exist; states include solid, liquid, gas, and plasma. the state in which matter has a definite shape and volume. the state in which matter takes the shape of its container and has a definite volume.

Answer: gaseous

Explanation:

The major states of matter are solid, gaseous, liquid and plasma. However, there numerous others continued to be discovered such as Bose-Einstein condensate due to continuous research.

Solid state of matter usually have shape and volume which is a major physical characteristic of solids, liquid state of matter do not have shape but have volume however, the tend to occupy the shape of the container with respect to their volume in the container. Gaseous state of matter do not shape or volume but just occupy space in the container.

Frieda, age 16, is a boating enthusiast who can tie 20 different kinds of knots. This type of knowledge is most aptly described as __________ knowledge.

Answers

The answer is Knot Tying.  Frieda, age 16, is a boating enthusiast who can tie 20 different kinds of knots. This type of knowledge is most aptly described as Knot Tying knowledge. The knowledge of how to tie and use knots is absolutely necessary.  Every boater should know how to tie boating knots to ensure safety to her and ger boat when exploring the waters.

how can you tell the difference between halite, calcite, and gypsum

Answers

Halite is transparent, but it can be died many different colors calcite is a white or colorless mineral consisting of calcium carbonate. It is a major constituent of sedimentary rocks such as limestone, marble, and chalk, can occur in crystalline form gypsum is a soft white or gray mineral consisting of hydrated calcium sulfate.

Which statement below is false? A) Weight depends on the force of gravity. B) Mass is the amount of matter in an object. C) Mass is a constant no matter where you are located. D) Weight is a constant no matter where you are located.

Answers

D because weight is not a constant, however; Matyer is a constant

The false statement is "Weight is a constant no matter where you are located."  The correct option is D.

A) Weight depends on the force of gravity: This statement is true. Weight is the force with which an object is pulled toward the center of the Earth (or any other celestial body) due to gravity. The weight of an object can vary depending on the strength of the gravitational field.

B) Mass is the amount of matter in an object: This statement is true. Mass is a measure of the amount of matter contained in an object. It is an intrinsic property and remains constant regardless of the location of the object.

C) Mass is a constant no matter where you are located: This statement is true. Mass is an intrinsic property of an object and is independent of its location. It represents the quantity of matter an object contains and does not change with location or gravitational field.

D) Weight is a constant no matter where you are located: This statement is false. Weight depends on the gravitational force acting on an object, which varies depending on the location. The weight of an object is equal to the mass of the object multiplied by the acceleration due to gravity at that location. Since the strength of gravity can vary from one location to another, the weight of an object will also vary accordingly. For example, an object will weigh less on the Moon compared to Earth due to the Moon's weaker gravitational pull.

Hence, The correct answer is option D.

To learn more about Gravitational force click:

brainly.com/question/29190673

#SPJ2

A boat initially traveling at 10. meters per second accelerates uniformly at the rate of 5.0 meters per second2 for 10. seconds. How far does the boat travel during this time?

Answers

Final answer:

The boat would travel 350 meters during the given time period, assuming uniform acceleration. This is calculated using the equation of motion for distance.

Explanation:

The distance traveled by the boat can be calculated using the equation of motion: S = ut + 0.5at², where S is the distance traveled, u is the initial velocity, a is acceleration and t is time. In this case, u = 10 m/s, a = 5 m/s² and t = 10 s.

Substituting these values into the equation we get: S = 10*10 + 0.5*5*10². So, the total distance travelled by the boat = 100 m + 250 m = 350 m. Therefore, the boat travels 350 meters during this time.

Learn more about the Physics equation of motion here:

https://brainly.com/question/34615504

#SPJ12

If it takes light 26,000 years to travel from the Sun to the center of the Milky Way galaxy, how far is the Sun from the center of the Milky Way? 26,000 light-years 2,600 light-years 260 light-years 26 light-years

Answers

It would take 26,000 light years

It's about 26,000 lightyears away from the galactic center.

The coefficient of linear expansion of iron is 1.0 × 10−5 per C◦ . The surface area of an iron cube, with an edge length of 5.0 cm, will increase by what amount if it is heated from 10◦ C to 60◦ C?

Answers

The linear expansion of iron is a = 1× 10∧ -5 /°C
Length edge is 5cm
Initial surface area of cube A = 6L ∧²
 = 150cm∧²
The edge length of cube after being heated from 
10°C to 60°C is
L = L[I +a dt] where the dt is = 60-10 = 50°C
5.0025cm
A surface area of the cube after heated is 
A' = 6L' ∧²
= 150.1500375 cm∧²
The increased area is = A' -A = 0.15cm∧²

Based on the linear expansion of iron, the increase in area is 0.15cm²

What is linear expansivity?

Linear expansivity is the increase in length per unit length of a material for every degree rise in temperature.

The linear expansion of iron is α = 1 × 10⁻⁵/°C

Length edge of the iron cube is 5cm

the surface area of cube A = 6L²

Initial surface area = 6 * 5² = 150cm²

The edge length of cube, L₂ after being heated from

10°C to 60°C is calculated using the formula below:

L₂ = L[I + α*dt]

where

α is the linear expansion of irondt is the temperature difference

dt = 60-10 = 50°C

L₂ = 5(1 + 1 × 10⁻⁵ * 50)

5.0025cm

The surface area of the cube after heated A' is

A' = 6 * 5.0025²

A' = 150.1500375 cm²

The increased area,  A' -A = (150 -  150.1500375) cm²

The increase in area is 0.15cm²

Learn more linear expansion at: https://brainly.com/question/23207743

What is the amount of displacement of a runner who runs exactly 2 laps around a 400 meter track?
A) 400 meters
B)0 meters
C)800 meters

Answers

Displacement is the distance and direction from the start point to the end point. Our runner finished exactly where he started. His displacement is zero.

The displacement is zero.

Hence, the correct option is B.

The displacement of an object is the change in its position.

In this case, the runner starts and ends at the same point, so the displacement is zero.

Even though the runner runs 800 meters (2 laps x 400 meters/lap), the runner does not change position.

The runner ends up where they started, so the displacement is zero.

Therefore, The displacement is zero.

Hence, the correct option is B.

To know more about displacement here

https://brainly.com/question/11934397

#SPJ3

the SI unit for pressure is pascal (Pa). One hectopascal would equal how many pascals?

0.1 Pa

10 Pa

100 Pa

1000 Pa

Answers

1 hectopascal (hPa) is equivalent to 100 Pa

Answer:

1 hectopascal = 100 Pascal

Explanation:

Pressure exerted by an object is defined as the force acting on it per unit area. Mathematically, it is given by :

[tex]pressure=\dfrac{force}{area}[/tex]

The SI unit of  unit of pressure is pascal. It is equivalent to :

[tex]1\ Pa=N/m^2[/tex]

or

[tex]1\ Pa=kg\ m^{-1}s^{-2}[/tex]

1 hectopascal = 100 Pascal

So, one hectopascal equals 100 pa. Hence, the correct option is (c).

After you rub a balloon on your hair it might stick to a wall. Why? Be specific.

Answers

simple on running balloon acquires charge and charge of wall opposite so it so both attracts each other so balloon sticks to wall

as the balloon is rubbed on hair, due to friction, the electron transfer takes place between them and as a result balloon acquire some charge. The balloon when touched with the wall sticks to it because of force of attraction between balloon and wall. the wall must have the charge opposite to what the balloon has on it. we know that unlike charge attract hence the balloon sticks to the wall.

A car with a mass of 2000 kg is moving around a circular curve at a uniform velocity of 25 m/s per second. The curve has a radius of 80 m what is the centripedal force on the car

Answers

The centripetal force is:
 F = mv² / R
 Where:
 m: mass of the object
 v: object speed
 R: radius of the curve.
 We have to:
 m = 2000kg
 v = 25 m / s
 R = 80 meters.
 Then the centripetal force acting on the vehicle is:
 F = (2000kg * (25m / s) ²) / 80m
 F = 15625 N

What metric measure would be best to use when measuring the amount of water given to a plant

Answers

The best metric is a combination of volume, frequency, soil moisture, evapotranspiration rate, and plant growth and health observation.

When measuring the amount of water given to a plant, it's crucial to choose a metric that accurately reflects the plant's needs and ensures optimal growth. The best metric to use for this purpose is:

1. **Volume of Water**: Measure water in milliliters or liters to quantify the actual amount provided to the plant.

2. **Frequency**: Track how often water is given, whether daily, weekly, or based on the plant's specific requirements.

3. **Moisture Content**: Use a soil moisture meter to gauge the water content in the soil around the plant's roots.

4. **Evapotranspiration Rate**: Consider the rate at which water evaporates from the soil and is transpired by the plant. This can help determine the water loss and replenishment needed.

5. **Plant Growth and Health**: Ultimately, the best measure is the plant's response. Monitor its growth, foliage appearance, and overall health to adjust watering practices accordingly.

By combining these metrics, you can ensure the plant receives the appropriate amount of water for optimal growth and health.

Can anyone define thermostat and list electrical appliances that have a thermostat?

Answers

A thermostat is a switch that operates itself when the temperature
goes above or below a temperature that the user can set.

-- Before you go to bed, you set the thermostat for 65° .
If the temperature in the house goes below 65° during the night,
the thermostat turns on the furnace, and keeps it running until
the house warms up to 65°.  Then it shuts the furnace off.

-- After breakfast, you set the thermostat for 75°.
If the temperature in the house goes above 75°, during the day, 
the thermostat turns on the air conditioner, and keeps it running until
the house cools down to 75°.  Then it shuts the air conditioner off.  

-- On Sunday morning, you put the slow cooker on the kitchen counter,
and you throw in a big roast, a sliced onion, some baby carrots, some
sliced potatoes, some vegetable stock, salt, pepper, garlic, chili powder,
and tomato paste.  Then you put the cover on, turn the power on, and
set the slow cooker to "LOW".  The heater in the slow cooker turns on.
  Whenever the temperature in the crock gets higher than 160°, the
thermostat in the slow cooker turns off the heater, and keeps it off
until the crock cools down to 160°.  Then the thermostat turns the
heater on again.
  By dinner time, you have a hot, juicy, scrumptious pot roast, ready
to eat.  It's not too hot, not too cold, not too tough, not dried out, and
it melts in your mouth.
You're still thinking about it when you go to bed, and your mom gives you
a slice to take to school for your lunch on Monday.
Final answer:

A thermostat is a device that controls the temperature of a system by sensing changes in temperature and automatically adjusting the heating or cooling system. Various electrical appliances have thermostats to maintain a set temperature by turning on and off the heating or cooling elements as needed.

Explanation:

A thermostat is a device that controls the temperature of a system by sensing changes in temperature and automatically adjusting the heating or cooling system. It helps maintain a set temperature by turning on and off the heating or cooling elements as needed.

There are many electrical appliances that have a thermostat, including:

RefrigeratorsAir conditionersHeatersThermostats for ovens and stovesWashing machines and dryersWater heatersThermostats for electric blankets

Learn more about Thermostat here:

https://brainly.com/question/32886060

#SPJ12

PLEASE HELP ASAP


A 2.9 kg model rocket accelerates at 15.3 m/s2 with a force of 44 N. Before launch, the model rocket was not moving. After the solid rocket engine ignited, hot gases were pushed out from the rocket engine nozzle and propelled the rocket toward the sky. Which of Newton’s laws apply in this example? Check all that apply.

A the first law

B the second law

C the third law

D the fourth law

E the fifth law

Answers

Hello! 

As per my understanding, the answer is A, B, and Cthe first law, the second law and the third law respectively. 

Look at the definitions of the three laws and your problem above and you will be able to figure it out.

Good luck :)

Answer:

A the first law

B the second law

C the third law

Explanation:

All three Newton laws are involved in this example. Let's see why:

1) First Law: "an object which has a zero net force acting on it stays at rest if it was at rest or continue to move at constant speed if it was already moving" --> this law applies to the first part of the problem, before the launch, when the rocket is not moving: since no forces are acting on it, it stays at rest.

2) Second law: "a net force F applied to an object of mass produces an acceleration a given by the relationship:

[tex]F=ma[/tex]"

This law applies when the rockets starts its motion: in fact, a force of 44 N is applied to the rocket of mass 2.9 kg, and its acceleration is a=15.3 m/s^2, and we see that these numbers satisfy the previous equation.

3) Third law: "when an object A exerts a force on object B, object B exerts an equal and opposite force on object A"

This law applies when the rocket is in motion: in fact, the rocket pushes the hot gases outside, so the hot gases pushes back on the rocket, accelerating it so it moves forward.

The electric field between two parallel plates has a magnitude of 875 N/C. The positive plate is .002 m away from the negative plate. What is the electric potential difference between the plates?

Answers

Given:
E = 875 N/C electric field
d = 00.002 m, distance between parallel plates

Note that
1 V = 1 J/C

The electric potential difference is


Answer: 1.8 V (nearest tenth)

The electric potential difference between two parallel plates with an electric field strength of 875 N/C and separated by 0.002 m is 1.75 volts.

The question asks about the electric potential difference between two parallel plates given the electric field magnitude. To find the electric potential difference (V) between the plates, we use the equation V = E × d, where E is the electric field strength and d is the distance between the plates.

In this case, the electric field (E) is 875 N/C, and the distance (d) is 0.002 m. Therefore, the electric potential difference is:

V = E × d = 875 N/C × 0.002 m = 1.75 V

The electric potential difference between the plates is 1.75 volts.

Please help! Just answer these questions

Answers

1. is heliocentric because it means that the sun is in the center of the solar system
2. Winter solstice- the day of the year with the shortest hours of daylight- December 21 or 22
Summer solstice- the day of the year with the longest daylight- June 21 or 22
Spring equinox- the equinox in spring- march 21 or 22
Fall equinox- the time when the sun crosses the plane of the earth's equator- September 21 or 22
Hope this helps

List two benefits and two applications of ultrasound

Answers

Ultrasound benefits;

1.       They are used in medicine for a noninvasive diagnostic scan of the body

2.       They have no ionizing radiation hence harmless compared to others radiations such as X-rays

Applications of ultrasound;

1.       Used in medicine e.g by obstetricians to monitor developing fetus in the womb

2.       Used in therapy such as ultrasound assisted thrombolysis






Sample Response: Two benefits of ultrasound imaging are that the patient is not exposed to ionizing radiation and the images are captured in real time. Ultrasound imaging is used to view the fetus during pregnancy and in echocardiograms to view the heart

How does the resistance change as you add bulbs to a series circuit? The resistance does not change. The resistance decreases. The resistance increases.

Answers

Light bulbs are loads, so they have a certain amount of resistance associated with them. In series, Resistance total = R1 +R2 +R3...
So the more resistance you add, the more resistance there is! Therefore, the resistance increases!

Answer:

The resistance increased

Explanation:

Just got it correct on Edge

How does energy travel?
1. In strings
2. In beams
3. In pulses
4. In waves

Answers

energy travels in wave
I think it's, 4. In waves
Hope this helped

Animals do not contribute to natural erosion. Please select the best answer from the choices provided T F

Answers

The answer is False hope this helps

Answer: false

Explanation: Animals do contribute to natural erosion. Plants help in keeping the soil at place. Some animals burrow the soil to live and helps in moving of soil from one place to another( process called soil erosion). Some animals leads to rapid destruction of plants and leads to faster erosion of soil as plants helps to keep soil at place. Lesser the number of plants will lead to more soil erosion.

The electric potential difference of a 150 µF capacitor is measured across the terminals of the capacitor and found to be 5 volts. What is the potential energy of the capacitor?

Answers

The potential energy stored in a capacitor is given by:
[tex]U= \frac{1}{2}CV^2 [/tex]
where
C is the capacitance of the capacitor
V is the potential difference across the plates of the capacitor

In our problem,
[tex]C=150 \mu F= 150 \cdot 10^{-6} F[/tex]
[tex]V=5 V[/tex]
Therefore, the potential energy of the capacitor is
[tex]U= \frac{1}{2}(150 \cdot 10^{-6}F)(5 V)^2 = 1.88 \cdot 10^{-3}J [/tex]

Answer:

it's 2 on edge

Explanation:

In a closed circuit containing one resistor and a battery, if the voltage in the battery increases, the current going through the resistor increases. Why does this occur?

Answers

V= IR is Ohm's Law.

V is voltage in volts
I is current in amps
R is resistance in ohm's

So, if we're trying to solve for I, aka current, then we should rearrange the equation.

V=IR
V/R = I

So, if you divide a larger number (Volts) by the same number (Ohm's), then you must get a larger number.

Ex.
The voltage in the circuit is 20V, the resistance is 5 Ohms.
V/R = I
20/5 =I
4 =I

But now if we increase voltage to 40 and keep resistance the same, we will prove that the current is higher!

V/R =I
40/5= I
8 = I

Therefore, we just proved that the current going through the same resistor will increase, as when we increased our voltage from ,20V to 40V, we got an increased current as well. Hope this helps you!! ((:

In a closed circuit there is a battery and resistor, from ohm's law if the voltage in the battery increases then the current in the resistor will also increase.

What is Ohm's law?

The connection between current, voltage, and resistance is described by Ohm's law. The voltage or potential difference across numerous materials determines how much constant current flows through them. As a result, if the voltage V (measured in volts) across two ends of a wire made of one of these substances is tripled, the current I (measured in amps) also triples, and the ratio V/I stay the same.

The resistance, R, for a specific material is it's V/I ratio and is expressed in ohms. Over extremely wide voltage and current ranges, the resistance of substances for which Ohm's law is applicable remains constant. The mathematical model for Ohm's law is V/I = R.

Therefore, from the formula of ohm's law if the voltage in the circuit will increase then the current will also going to increase with it.

To know more about Ohm's law:

https://brainly.com/question/1247379

#SPJ6

Why is Melanie's diagram of the phases of the moon incorrect? First quarter moon should be between the sun and Earth. Third quarter moon should be between the sun and Earth. The position of the full moon and new moon have been interchanged. The position of the first quarter moon and third quarter moon have been interchanged.

Answers

Before we can spot what's wrong with it, we would need to actually SEE the diagram. It's the only way.
If you have Susan's diagram of the phases of the moon, the answer is C. The position of the full moon and new moon have been interchanged.

the lowest pitch that the average human can hear has a frequency of 20.0 Hz. if sound with this frequency travels through air with a speed of 331 m/s what is it's wavelength?

Answers

Hi,
λ=wave velocity/frequency
λ=331 m/s / 20.0 Hz
λ=16.55 m
Hope this Helps you.

The lowest pitch that the average human can hear has a frequency of 20.0 Hz. if sound with this frequency travels through air with a speed of 331 m/s it's wavelength is 16.55 m.

What is frequency?

The number of vibrations counted per second is called frequency. A wave is a group of vibrations that are referred to as energy. The bottom node is known as the crest, and the top node is known as the trough.

λ = wave velocity/frequency

λ = 331 m/s / 20.0 Hz

λ = 16.55 m

The lowest pitch that the average human can hear has a frequency of 20.0 Hz. if sound with this frequency travels through air with a speed of 331 m/s it's wavelength is 16.55 m.

To learn more about frequency refer to the link:

brainly.com/question/5102661

 #SPJ2

under normal conditions describe how increasing the temperature affects the solubility of a typical salt

Answers

For many solids dissolved in liquid water, the solubility increases with temperature. The increase in kinetic energy that comes with higher temperatures allows the solvent molecules to more effectively break apart the solute molecules that are held together by intermolecular attractions.

two people are pushing a couch from opposite sides. one person pushes with a force of 2 N. the other person pushes with a force of 4 N. which of the following best describes how the couch will move?

Answers

Final answer:

The couch will move in the direction of the larger force being applied, which is the side of the person pushing with a force of 4 N.

Explanation:

When two people push a couch from opposite sides with forces of 2 N and 4 N respectively, the couch will move in the direction of the larger force. In this instance, the person applying the 4 N force will cause the couch to move in their direction, assuming no other forces are at play (like friction from the floor or additional forces from other directions). The movement can be predicted using Newton's Second Law of Motion, which states that the acceleration of an object is directly proportional to the net force acting upon it and inversely proportional to its mass.

the gravitational force between two objects increase as the mass increases or distance decreases

Answers

The correct answer is: True

Explanation:
According to Newton's Gravitational law:

[tex]F_g = \frac{Gm_1m_2}{r^2} [/tex]

As you can see the gravitational force is directly proportional to the masses of the objects while inversely proportional to the square of distance (r^2) between them.

Hence, yes, your statement is true!

the gravitational force between two objects increase as the mass increases or distance decreases

I need help
Describe what happens to the energy of a wave if the frequency decreases. Enter your answer in the space provided.

Answers

The energy of the wave will decrease.

The energy of a wave is given as

E = h f

where E = energy of waver

h = plank's constant

f = frequency of the wave.

From the formula , we see that the energy of the wave is directly proportional to the frequency of the wave. hence as the frequency of the wave decrease, the energy of the wave will decrease.

Other Questions
in part three, we are told of the secret nighttime operation by the americans, resulting in the killing of osama bin laden. what are your reactions to the pakistani view of the events? Nick flew 1,560 miles in 3 hours on his airline flight. How far did nick fly in 1 hour ? You draw a single card from a standard deck of cards. what is the probability of drawing a diamond? A group dedicated to promoting human rights would most likely focus on addressing which problem? Why did Robert Y. Hayne oppose tariffs?A. They cut down on competition for foreign goods.B. They helped expand roadways needed to develop the West.C. If the federal government could levy tariffs, then other policies that affected the states, such as abolishing slavery, could be next.D. They required participation by a nongovernment agency.E. They were unconstitutional. what does prospero mean in this speech to ariel in the tempest ? Let them be hunted soundly. At this hourLie at my mercy all mine enemies:Shortly shall my labours end, and thouShalt have the air at freedom: for a littleFollow, and do me service.a. my life is coming to an end, and i now realize how much of it was a lie b. i should have forgiven my enemies, and i would have peace of mindc. i will set you free once we finish our work against our enemiesd. you will speak at my funeral and only remember the good i had done A mixture of 100 g of k2cr207 and 200 g of water is stirred at 60 c until no more of the salt dissolves. the resulting solution is poured off, leaving the undissolved solid behind. the solution is now cooled to 20c. what mass of k2cr207 crystallizes from the solution during the cooling? What group currently makes up the largest portion of immigrants in the united states? President of the u.s. at the onset of the cold war who supported supply drops to berlin; he involved america in the korean war; aided the french in vietnam to stop the spread of communism from china Tsar Nicholas II enraged the russian people by The largest difference between mars' northern and southern hemispheres is that Captive breeding programs are used to Which of the following steps would be most useful in solving a problemRestate the problemConsider the positive consequences onlyIgnore impractical ideasUse your first solution Consider 2NH3(g)+3CuO(s)N2(g)+3Cu(s)+3H2O(g) 2NH 3 (g)+3CuO(s)N 2 (g)+3Cu(s)+3H 2 O(g). What volume (in mL) of NH3 NH 3 is required to completely react 45.2 g of CuO at STP? Enter your solution as a numerical value with no units. what do you need before you can define long-term goals?Short-term goalsAn Action planA visionA self-assessment A jar contains 26 fluid ounces of spaghetti sauce how many cups of spaghetti sauce do 4 jars contain A: When the score is tied at 40 all B: Tennis swing on the strong side of the body C: Tennis swing on the weak side of the body D: When the service hits the net and lands in E: Refers to the score when no points have been won\ F: Rule for deciding a set when the score is 6-6 G: when the serve does not land in the service ox H: The swing that begins all volleys I: A good service that is not returnable J: The game point following deuce 1. Ace: D? 2. Serve: H? 3. Fault: G? 4. Ground Stoke: I? 5. Backhand: C? 6. Advantage: B? 7. Tiebreaker: F? 8. Love: A? 9. Let: J? 10. Deuce: E? Nancy rowed across the lake with her friend Kelly at a rate of 5 mph. Kelly then rowed back at a rate of 4 mph. If the lake is 6 miles across, how long did it take them to complete their trip? hello can you please help me posted picture of question Alongside is a common transition used to describe things _____.A.with logical relationshipsB.in spatial orderC.through comparison and contrastD.by order of importance