Answer:
If all the character pairs match after processing both strings, one string in stack and the other in queue, then this means one string is the reverse of the other.
Explanation:
Lets take an example of two strings abc and cba which are reverse of each other.
string1 = abc
string2 = cba
Now push the characters of string1 in stack. Stack is a LIFO (last in first out) data structure which means the character pushed in the last in stack is popped first.
Push abc each character on a stack in the following order.
c
b
a
Now add each character of string2 in queue. Queue is a FIFO (first in first out) data structure which means the character inserted first is removed first.
Insert cba each character on a stack in the following order.
a b c
First c is added to queue then b and then a.
Now lets pop one character from the stack and remove one character from queue and compare each pair of characters of both the strings to each other.
First from stack c is popped as per LIFO and c is removed from queue as per FIFO. Then these two characters are compared. They both match
c=c. Next b is popped from stack and b is removed from queue and these characters match too. At the end a is popped from the stack and a is removed from queue and they both are compared. They too match which shows that string1 and string2 which are reverse of each other are matched.
Joe, a user, wants his desktop RAID configured to allow the fastest speed and the most storage capacity. His desktop has three hard drives. Which of the following RAID types should a technician configure to achieve this?A. 0B. 1C. 5D. 10
Answer:
A. 0
Explanation:
The technician should configure the RAID 0 for Joe.
RAID 0 also referred to as the striped volume or stripe set is configured to allow the fastest speed and the most storage capacity by splitting data evenly across multiple (at least two) disks, without redundancy and parity information.
Also, RAID 0 isn't fault tolerant, as failure of one drive will cause the entire array to fail thereby causing total data loss.
Consider two medical tests, A and B for a virus. Test A is 95% effective at recognizing the virus when it is present but has a 10% false positive rate (indicating that the virus is present, when it is not). Test B is 90% effective at recognizing the virus, but has a 5% false positive rate. The two tests use independent methods of identifying the virus. The virus is carried by 1% of all people. Say that a person is tested for the virus using only one of the tests and that test comes back positive for carrying the virus. Which test returning positive is more indicative of someone really carrying the virus?
Answer:
Test B.
Explanation:
Test A - 95% effective with 10% false positive rate.
Test B -90% effective with 5% false positive rate.
Test A and B are independent methods.
One of the tests is carried out on a person and turns out to be positive.
To calculate the effectiveness of the test,
Test A = Effectiveness in percentage divided by the false positive rate.
95/10 = 9.5
Test B = Effectiveness in percentage divided by the false positive rate.
90/5 = 18.
Test B has a higher effective rate than Test A.
Therefore Test B is more indicative of a positive result than Test A.
The term platform as a service has generally meant a package of security services offered by a service provider that offloads much of the security responsibility from an enterprise to the security service provider T/F
Answer:
False
Explanation:
This statement about platform as a service is not true.
Unlike the definition in the question above, platform as a service refers to categories of services provided by cloud computing; These services makes provision for a platform that let users to use, develop, run, and manage their apps without the problem of complexity as a result of building and maintaining the infrastructure typically associated with developing and launching an app.
In addition to all these, users are provided a suite containing readily built tools to develop, customize and test their own built application.
The term platform as a service has generally meant a package of security services offered by a service provider that offloads much of the security responsibility from an enterprise to the security service provider - False
PaaS refers to a platform for systems development over the Internet, which allows enterprises to develop, run, and manage applications without the complexity of building and maintaining the infrastructure typically associated with developing and launching an app. It includes services like databases, middleware, and development tools, and may come with security features, but it is not solely focused on security services.
Cloud services, include PaaS, Software as a Service (SaaS), and Infrastructure as a Service (IaaS), are part of a trend towards the outsourcing of IT resources and functions to achieve cost efficiency, scalability, and flexibility. These services are attractive to businesses of all sizes and industries as they allow for the sharing of resources and automatic updates, often resulting in reduced upfront costs and administrative overhead.
Provide an example of making multiple paragraphs tags using html and at least 3 sentences.
Answer:
<p> tag:
The <p> tag in HTML defines a paragraph. These have both opening and closing tag. So anything mentioned within <p> and </p> is treated as a paragraph. Most browsers read a line as a paragraph even if we don’t use the closing tag i.e, </p>, but this may raise unexpected results. So, it is both a good convention and we must use the closing tag.
Syntax:
<p> Content </p>
Example:
<!DOCTYPE html>
<html>
<head>
<title>Paragraph</title>
</head>
<body>
<p>A Computer Science portal for geeks.</p>
<p>It contains well written, well thought articles.</p>
</body>
</html>
Output:
A computer Science Portal for geeks.
It contains well written, well thought articles.
If Rahul wants to reduce his monthly spending, he should A get a better job. B reduce his fixed expenses. C reduce his variable expenses. D reduce his fixed and variable expenses.
Answer:
C. reduce his variable expenses.
Explanation:
There are two types of expenses: Variable expenses and Fixed Expenses. Fixed Expenses are the expenses that are fixed for every month and its difficult to reduce these expenses such as house rent, fuel or travel expenses to go for work, utility bills. These are almost fixed for every month and it is difficult to reduce them. On the other hand, variable expense are the expense that vary for every month and can reduce easily. These expenses includes eating outside at restaurants, clothing, enjoying and arranging parties.
Rahul should reduce his variable expense to reduce his spending. This could be the easier way to reduce the expenses and save more. First option is not valid as he want to reduce his spending, this shows that he is satisfied with his current job but worried about extra expenses each month. This is the reason option C is the better choice for him to reduce expense.
Answer:
reduce his fixed and variable expenses.
Explanation:
If rahul wants to reduce how much money he spends, he should try to reduce both of them. For example, you live in an expensive house and your losing money. You have to reduce your variable expenses by trying to lower it down or moving to a new home with less costs of variable expenses. Fixed expenses are things that aren't that important, which is easy to reduce. Therefore the answer is D. Reduce his fixed and variable expenses
Saved Arrays are ________. Question 1 options: variable-length entities fixed-length entities data structures that contain up to 10 related data items used to draw a sequence of lines, or "rays" Question 2 (1 point) Which of the following statements about arrays are true? A. An array is a group of variables containing values that all have the same type. B. Elements are located by index. C. The length of an array c is determined by the expression c.length();. D. The zeroth element of array c is specified by c[0].
Answer:
The answer to this question can be described as follows:
In question 1:
Arrays are "fixed-length entities".
In question 2:
The answer is "Option A, B, and D".
Explanation:
Array is a collection of the elements of a similar type, in which we store integer, decimal, and character at a time. Array indexing always starts with 0. It's searching always starts with there index value, and the wrong option can be described as follows:
In Question 1, another option is not defined, that's why the given answer is correct. In Question 2, except for option C, all were correct because to find length we also use the sizeof method, that's why it is wrong.
Camille prepared excellent PowerPoint slides for her speech about education reform, but the speech didn't go as well as she had hoped. She had trouble finding the Enter key on her computer to advance her slides, and sometimes she skipped a slide because she held the key down too long. According to your textbook, Camille could have presented her slides more effectively if she had
Answer:
The answer is "she uses the keyboard unless she could quickly progress the slides".
Explanation:
Planning is the single least key aspect of having the performance effectively. It is a critical foundation and which can dedicate much space as possible to it and avoids loopholes.
It is the proper planning that may also ensure, that you have fully considered. It is the thing, which we need to convey into your delivery and will also help to boost your trust.Because a vector container uses a dynamically allocated array to hold its elements,
A. it is common for the vector class to allocate less memory
B. than it needs more memory
C. than it needs a separate memory location for copies of new elements
D. None of these
If your program throws an IndexOutOfRangeException, and the only available catch block catches an Exception, ______________________. A. the Exception catch block executes the Exception B. an IndexOutOfRangeException catch block is generated automatically the IndexOutOfRangeC. catch block is bypassedD. Exception is thrown to the operating system
Answer:
Option A is the correct answer for the above question.
Explanation:
The Index Out Of Range exception is a type of Run exception which is generated on run time. It means when any user executes the software or program, then that program gives some error on the execution time by some coding problem or some value problem.
So this type of exception can be handle by the Catch block which is also stated by the option A. Hence A is the correct answer but the other is not because:-
Option B states that this exception is generated by the catch block which is not correct.Option C states that the catch block passes the exception which is also not the correct.Option D states that the exception is passed for the operating system, but it is passed to the catch block only.Select what's true about packet sniffers. Check All That Apply Legitimate sniffers are used for routine examination and problem detection.Legitimate sniffers are used for routine examination and problem detection. Unauthorized sniffers are used to steal information.Unauthorized sniffers are used to steal information. Packet sniffers are relatively easy to detect.Packet sniffers are relatively easy to detect. Packet sniffers use viruses to capture data packets.
Answer:
-Legitimate sniffers are used for routine examination and problem detection.
-Unauthorized sniffers are used to steal information.
Explanation:
A packet sniffer also known as a packet analyzer, is a computer software or hardware tool that can be used to intercept, log and analyze network traffic and data that passes through a digital network.
Legitimate packet sniffers are used for routine examination and problem detection while Unauthorized packet sniffers are used to steal information.
Packet sniffers serve as network diagnostic tools used by administrators and can be used illicitly to steal network data. They are not easy to detect and don't use viruses to capture data.
Explanation:A packet sniffer can be referred to as a computer software or hardware designed to intercept and log traffic on a digital network. They function as network diagnostic tools used by administrators to troubleshoot and optimize network operations. Legitimate sniffers are indeed used for routine examination and problem detection. On the other hand, unauthorized sniffers are illicitly used to steal information by capturing sensitive data traveling over the network. Unfortunately, contrary to intuition, packet sniffers are not relatively easy to detect because data transmission over networks is typically public. Furthermore, packet sniffers do not use viruses to capture data packets, they simply log the packets moving through networks.
Learn more about Packet Sniffers here:https://brainly.com/question/32272138
#SPJ6
Dynamic routing:a) imposes an overhead cost by increasing network trafficb) decreases performance in networks which have many possible routesc) decreases performance in networks with "bursty" trafficd) does not add to the network traffic and should be used in all network environmentse) is another term for static routing in WANs
Answer:
a) imposes an overhead cost by increasing network traffic
Explanation:
Dynamic routing also known as adaptive routing a network protocol that allows optimal data routing by selecting paths using complex routing algorithms according to real time routing table changes in a router.
In Computer networking, Dynamic routing imposes an overhead cost by increasing network traffic.
You've just completed a survey of the wireless signals traversing the airspace in your employer's vicinity, and you've found an unauthorized AP with a very strong signal near the middle of the 100-acre campus. What kind of threat do you need to report to your boss? a) Rogue access pointb) War drivingc) Bluesnarfingd) Hidden node
Answer:
a) Rogue access point
Explanation:
Rogue access point also known as rogue AP is a wireless access point installed on a secure network infrastructure either by an employee or a malicious hacker but without explicit authorization from the local network administrator.
As a network engineer, if you find an unauthorized AP with a very strong signal near the middle of the 100-acre campus, you will need a Rogue access point kind of threat to report it to your boss.
Write a recursive function, len, that accepts a parameter that holds a string value, and returns the number of characters in the string. The length of the string is: 0 if the string is empy ("") 1 more than the length of the string beyond the first character
Answer:
following are the method definition to this question:
def len(x): #defining a method
if(x==""): #defining condition that checks value store nothing
return 0# return value
else: # else block
return 1+len(x[1:]) #use recursive function and return value
print(len('The collection of table')) #call method and prints its value
Output:
23
Explanation:
In the above method definition, a "len" method is declared, in which x variable accepts as its parameter, inside the method a condition block is used, which can be explained as follows:
In if block, we check the value is equal to null if this condition is true, it will return a value, that is 0. In this condition is false, it will go to else block in this block, the recursive method is used, which calculates value length and return its value.Walter’s health insurance premium increased by 22 percent this year. Now he pays $488 every month for health insurance. What was he paying every month before the premium increase?
Answer:
$380.64
Explanation:
So he what you do is take $488 multiply it by 22% to get $107.36 you then subtract $488 from $107.36 to get what he was paying before premium increase which is $380.64
The monthly premium that you pay to your health insurer. People might be charged as a source of income again for the insurance business.
Premium calculation:increased percentage= 22%
new health premium value = $488
old premium value= x
[tex]\to x \ \ of \ \ 22\%= 488\\\\[/tex]
To calculate the old premium value we need to calculate the new premium percentage value:
[tex]\to 488 \times 22\%\\\\\to 488 \times \frac{22}{100}\\\\\to 4.88 \times 22\\\\\to 107.36\\\\[/tex]
After calculating the percentage value subtract it from the new premium value:
[tex]\to \$ 488- \$ 107.36\\\\\to \$380.64 \\\\[/tex]
Find out more about the premium here:
brainly.com/question/15214520
Match the order of precedence to the process logic that an OSPFv3 network router goes through in choosing a router ID. (Not all options are used.) a.The router displays a console message to configure the router ID manually. b.The router uses the highest configured IPv4 address of an active interface. c.The router chooses the highest IPv6 address that is configured on the router. d.The router uses the highest configured IPv4 address of a loopback interface. e.The router uses the explicitly configured router ID if any.
Answer:
Explanation:
Priority 1 - The router uses the explicitly configured router ID if any.
Priority 2 - The router uses the highest configured IPv4 address of a loopback interface.
Priority 3 - The router uses the highest configured IPv4 address of an active interface.
Priority 4 - The router displays a console message to configure the router ID manually.
Write a Common Lisp predicate function that tests for the structural equality of two given lists. Two lists are structurally equal if they have the same list structure, although their atoms may be different. A script of defining and testing the function in Clisp on the empress system must be submitted.
Answer:
Explanation:
For the Program plan:
1. Two lists are structurally equal if they have the same list structure, although their atoms may be different.
2. So we are going to write a function that will check if elements in both lists at same position are atoms or not.
3. If yes then it should return true else false.
Program:
#lang scheme
( define (structurally-equal list1 list2)
(cond ((and (null? list1) (null? list2)) #t)
((or (null? list1) (null? list2)) #f)
((and (atom? (car list1)) (atom? (car list2)))
(structurally-equal (cdr list1) (cdr list2)))
((or (atom? (car list1)) (atom? (car list2))) #f)
(else (and (structurally-equal (car list1) (car list2))
(structurally-equal (cdr list1) (cdr list2) )))))
( define (atom? x) (not (or (pair? x) (null? x))))
Which of the following are correct? I. Hold the middle mouse button to rotate the model on the screen. II. To pan the model, hold down the Ctrl key and the middle mouse button . III. Use the mouse scroll wheel to zoom in and out of the model.
Final answer:
According to the provided reference, to manipulate a protein model, rotating is done with the left mouse button, selecting with Ctrl + left mouse button, changing size with the right mouse button, and translating with Ctrl + right mouse button. Panning is not performed with the middle mouse button as stated in the original question.
Explanation:
The instructions given in the question seem to pertain to manipulating a 3D model or structure, commonly a task in software applications for subjects like bioinformatics, molecular modeling, or computer-aided design. Based on the reference provided, the correct actions to manipulate a protein model using a cursor (mouse) are as follows:
Rotate Protein: Use the left mouse button along with moving the cursor.Select Protein: Use Ctrl + left mouse button and move the cursor.Change Size of Protein: Use the right mouse button with cursor movement.Translate Protein: Hold Ctrl + right mouse button and move the cursor.Identify specific amino acids by placing the cursor over the protein.To address the original question, holding the middle mouse button to rotate the model is not listed in the provided reference, while panning the model is done with Ctrl + right mouse button, not the middle mouse button. Zooming using the mouse scroll is not mentioned here, but it's a common function in many modeling applications. It's important to refer to the specific software documentation for precise controls.
All three statements are correct:
I. Holding the middle mouse button typically allows you to rotate the model on the screen.
II. To pan the model, you usually hold down the Ctrl key along with the middle mouse button.
III. Using the mouse scroll wheel often allows you to zoom in and out of the model.
here's a detailed explanation:
I. Rotating the Model: Holding the middle mouse button allows you to rotate the model on the screen. By clicking and dragging the mouse while holding the middle button, you can change the view angle of the model.
II. Panning the Model: To pan the model, simultaneously hold down the Ctrl key and the middle mouse button. While holding these keys/buttons, you can move the model horizontally or vertically within the viewport by dragging the mouse.
III. Zooming the Model: Use the mouse scroll wheel to zoom in and out of the model. Scrolling the wheel forward zooms in, bringing the model closer, while scrolling backward zooms out, moving the model farther away. This provides a way to adjust the magnification level of the model without changing its orientation or position on the screen.
Complete the crossword puzzle.
Answer:
There is no picture or anything on the page so we will not be able to answer this.
Explanation:
Answer:
There is no picture
Explanation:
HW 1 / C Create a program "Guess My Letter" - All work can be done in the main method - pick a (your) letter and store it in a local variable - Get a char from the user - Compare the char submitted by the user with ‘your’ letter - keep requesting another letter from the user until you have a match (loop..?) - print some message identifying the match & exit on match * compile and run your program via gcc / mingw * submit the source ( .c ) file only
Answer:
// This program is written in C++ programming language
// Comments are used for explanatory purpose
// Program start here
#include<iostream>
#include<stdlib. h>
using namespace std;
int main ()
{
// Create two char variables; myinput and userguess
char myinput, userguess;
// Accept input for myinput
cout<<"Pick a letter: ";
cin>>myinput;
// Initialize userguess to empty string
userguess = ' ';
system("CLS");
// Clear screen so that user won't see myinput. The content of the variable won't be cleared
// Prompt user to guess the letter correctly;
cout<<"Take a guess: ";
cin>>userguess;
// The iteration below will be repeated until the user guess correcto
while( userguess != myinput)
{
cout<<"You guessed wrongly\n"<<Take another guess: ";
cin>>userguess;
}
cout<<"You guessed right!!!";
return 0;
}
// End of Program
True or False (type the entire word)
In Excel, when relative cell references are copied across multiple cells, the references change based on the relative position of rows and columns. They are designated in a formula by the addition of a dollar sign ($).
Answer:
I'd say False
Explanation:
If you copy the formula =A1+B1 from row 1 to row 2, the formula will become =A2+B2.
Write a recursive function sumAll that accepts an integer argument and returns the sum of all the integers from 1 up to the number passed as an argument. For example, if 50 is passed as an argument, the function will turn the sum of 1, 2, 3, 4, ..50.
Answer:
int sumAll(int n)//function definition.
{
if(n==1)//if condition.
return 1;
else//else condition.
{
return n+sumAll(n-1);//return the value and call the function in recursive manner.
}
}
Explanation:
The above-defined function is a recursive type function that is written in the c language, which holds the if and else condition.When the user passes the largest value from 1, then the else condition will be executed which adds the largest value and pass the value after the decrement of the value as an argument.When the value will become 1, then the function if-block will be executed which returns the value and ends the calling function recursively.A patent law firm based in New Jersey provides patent drafting and filing services to its clients. The company is planning to build an electronic database of patent applications it has filed for its clients over the years. However, most of its clients use handwritten notes and figures for their reference. Which of the following software tools would best help the firm convert the large number of paper-based notes from its clients into electronic records that can be easily searched and referenced?
A) image recognitionB) optical mark recognitionC) semantic mappingD) intelligent character recognition
Answer:
D) intelligent character recognition
Explanation:
Based on the scenario being described within the question it can be said that the best software tool for this particular situation would be an intelligent character recognition software. In the field of computer science, this is a software that allows an a computer to scan a handwritten note from paper and convert it into an electronic format that can then be stored and archived for future use. Thus allowing you to organize and later search for and reference the information.
Consider creating rasters for these data sets, each of which will be stored using integers. What pixel depth, in bytes, would be the most efficient choice for each type of data: (a) elevation in meters; (b) crown canopy percent; (c) temperature in degrees for a thermal camera used by firefighters; (d) median county income in dollars
Answer:
(a) 2 bytes
(b) 1 byte
(c) 1 byte
(d) 2 bytes
Explanation:
The pixel depth, in bytes, that would be most efficient choice for each type of data are:
(a) elevation in meters; 2 bytes.
(b) crown canopy percent; 1 bytes.
(c) temperature in degrees for a thermal camera used by firefighters; 1 bytes.
(d) median county income in dollars; 2 bytes.
Pixel depth also known as bit depth, determines the number of bits used to hold a screen pixel or the range of values that a particular raster file can store.
Pixel depth is calculated with the formula [tex]2{^n}[/tex] where n is the pixel depth.
Final answer:
The most efficient pixel depth for (a) elevation in meters is 2 bytes, (b) crown canopy percent is 1 byte, (c) temperature in degrees for thermal images is 2 bytes, and (d) median county income is likely 4 bytes, considering the range of values and the attributes of raster data.
Explanation:
When determining the most efficient pixel depth in bytes for different data sets stored as integers in raster format, you must consider the range of possible values and the data structure of raster data. Considering the data types:
(a) Elevation in meters: Elevation can vary widely, perhaps from below sea level to thousands of meters. A 16-bit integer providing values up to 32,767 would suffice for most global elevation needs, requiring 2 bytes per pixel.(b) Crown canopy percent: Canopy cover percentage ranges from 0 to 100, which can be accommodated by an 8-bit integer (1 byte per pixel), since this provides 256 distinct values.(c) Temperature in degrees for a thermal camera used by firefighters: The temperature range for thermal cameras is likely to be extended, but using a 16-bit integer (2 bytes per pixel) would cover most conceivable temperatures in both directions, allowing for a high level of granularity.(d) Median county income in dollars: Income data can vary greatly, but a 32-bit integer (4 bytes per pixel) may be necessary to cover the full range without sacrificing data accuracy.It is also important to consider the spatial resolution of the raster dataset, which affects the accuracy and detail of the displayed information, as well as the storage space required due to the necessity to store a value for every pixel.
When a user first authenticates with a Kerberos-based server, he/she will receive _________ Group of answer choices a ticket-granting-ticket which allows the user to generate it's own tokens to access network resources. a token that will automatically allow access to any resources. a ticket-granting-ticket which asserts the authenticity of the user's credentials to other network resources. a list of available network resources to connect to.
Answer:
a ticket-granting-ticket which asserts the authenticity of the user's credentials to other network resources.
Explanation:
Kerberos is an authentication protocol designed to ensure security when communicating over a public or non-secure network by using symmetric key cryptography.
When a user first authenticates with a Kerberos-based server, he/she will receive a ticket-granting-ticket which asserts the authenticity of the user's credentials to other network resources.
Averigua las diferentes intensidades, la potencia total y el gasto en € (de un mes de 30 días con el equipo conectado todo el tiempo) en el siguiente caso: Componente Tensión (V) Potencia (P) CPU 0,95 V 27,97 W RAM 1,257 V 2,96 W Tarjeta Gráfica 3,28 V 75,3 W HDD 5,02 V 19,3 W Ventiladores 12,02 V 2,48 W Placa base 3,41 V 18,3 W
Explanation:
Here's what the question entails in clearer detail;
Find out the different intensities, the total power and the cost in € (from a 30-day month with the equipment connected all the time) in the following case: Component Voltage (V) Power (P) CPU 0.95 V 27.97 W RAM 1,257 V 2.96 W Graphics Card 3.28 V 75.3 W HDD 5.02 V 19.3 W Fans 12.02 V 2.48 W Motherboard 3.41 V 18.3 W
A user complains that his new mouse doesn't work right. He has an old system at home and when he has had this problem, he cleaned the ball on the underside of the mouse to fix it, but this mouse doesn't have a ball on the underside. What can you tell him about his mouse?
A) the ball must have fallen out
B) the ball is hidden under an access panel on new mice
C) the mouse is an optical mouse
D) the mouse uses sonar to detect movement
Answer:
the mouse is an optical mouse
Explanation:
The user's mouse does not have a ball to be cleaned when it does not work right because he or she is using an optical mouse. This type of mouse does not use the old-ball-system, but rather uses a light source, which usually consist of a light detector and a light-emitting diode, and this set-up ensures that movement is detected relative to a surface and hence the cursor is moved too.
what are the uses of a modem
Modem provides internet, WiFi, we can connect multiple devices to internet through modem.
Modem provides radiation of short wavelength and the transmitter in your mobile phones and computers convert those radiations into digital signals and vice-versa.
Modems in the 1990s converted digital information into analog signals for transmission over phone lines, enabling users to connect to early online service providers. As internet content grew, broadband connections using cable lines became more prevalent for faster speeds.
Explanation:The uses of a modem are crucial to understanding how early internet users connected to the burgeoning online world. In the 1990s, modems became faster and more widely utilized with the advent of the internet. These devices worked by converting digital information from a computer into analog signals that could be transmitted over phone lines, and then back into digital form at the destination.
Initially, modems enabled users to connect to online service providers like America Online (AOL) using standard phone lines, functioning in a similar way to Bulletin Board Systems (BBSs). However, with the explosion of internet content, service providers shifted towards broadband connections using cable television lines and dedicated lines for faster data transfer.
Write a method called makeLine. The method receives an int parameter that is guaranteed not to be negative and a character. The method returns a String whose length equals the parameter and contains no characters other than the character passed. Thus, if the makeLine(5,':') will return ::::: (5 colons). The method must not use a loop of any kind (for, while, do-while) nor use any String methods other than concatenation. Instead, it gets the job done by examining its parameter, and if zero returns an empty string otherwise returns the concatenation of the specified character with the string returned by an appropriately formulated recursive call to itself.
To create a string of a specified length and character using recursion, define a method that checks if the length is zero and returns an empty string if so. Otherwise, concatenate the character with the result of a recursive call to the method, decrementing the length each time. This approach ensures the string is built as required without using loops.
To address the problem at hand, we need to write a method called makeLine which generates a string of a specified length, filled with a given character. This method should avoid using any loops and rely purely on recursion and concatenation.
Steps to Implement the Method:
Define the method makeLine that accepts an int parameter representing the length and a char parameter representing the character.Check if the integer parameter is zero. If it is, return an empty string.If the integer parameter is greater than zero, concatenate the character with the result of a recursive call to makeLine, decrementing the integer parameter by one.This process will repeat until the base case (integer equals zero) is reached, resulting in the final string.Here is the code implementation:
public static String makeLine(int length, char c) {For example, calling makeLine(5, ':') will return ":::::" as it concatenates the character ':' five times recursively.
When reading words using a Scanner object's next method, _________. a. any characters at the beginning of the input that are considered to be white space are consumed and become part of the word being read b. any characters that are considered to be white space within the word become part of the word c. the program must discard white space characters at the beginning of the input before calling the next method d. any characters at the beginning of the input that are considered to be white space are consumed and do not become part of the word being read
Answer:
The answer is "Option d"
Explanation:
The scanner method is the full token of the process, that finds and returns. It is token, which is followed by both the inputs meeting and the guideline template. This method can block, even though the former instance of hasNext() is true while waiting for input, and wrong choices can be described as follows:
In option a, It is incorrect because the character at the beginning can't be considered. In option b, It is wrong because the characters are known as the word in which blank space not a part of the word. In option c, It is wrong because in this input before the call is not the method.Nila has created a report, and now she would like to a create table of contents. Nila has reviewed her report and decides to add text that is not formatted as a heading to the table of contents. She must select the text, format it as a ____, and then update the table of contents.
Answer:
The answer is "heading"
Explanation:
Headings, which appear into your document must be marked simply, objectively and correctly because it shows the final report structure and enable to easy access with specific information.
It also promotes to read the document. So, its consistency is ensured in the headings. In sort documents, it can't require any heading, but it Nila created a report, in which she requires heading and then she update the content of the tables, and other choices can't be described in the given scenario, that's why it is correct