The Bernoulli principle states that the pressure inside a liquid increases with depth:
A. True
B. False
C. True only if the channel is horizontal
D. True only if the section of the channel is constant
E. True only if there is no friction
The answer should be B. but why?

Answer:

three times

Explanation:

F=Eq

3F=3Eq

Answer:

three times

Explanation:

The relation between the force and the electrostatic field is given by

F = q E

where, F be the force , q be the charge and E be the strength of electrostatic field.

Here the charge is q

F = q E .... (1)

Now the charge remains same but the force three times, let E' be the electrostatic field strength.

3F = q E'    .... (2)

Divide equation (2) by equation (1)

E' / E = 3F / F

E' = 3 E

Answer:

closely molecules materials are the best compared to far apart molecule materials

Explanation:

closely molecules materials are easily charged and loose charge slowly while far apart molecules materials get charged slowly wand loose charge faster

Answer:Explained

Explanation:

Engineers at a technology company should know about the structure of different metals because a battery works on chemical reaction occurring inside in it.If a wrong metal is chosen then chances of spilling or even explosion can occur. Moreover knowledge of metal may help them to make battery light and tougher which can withstand an elevated temperature.

Answer:

D. It prevents anything from going wrong during the experiment.

Explanation:

One reason that writing clear step-by-step procedures is important because it prevents anything from going wrong during the experiment.

Answer:

The following diagram shows resistors in a series circuit.

Explanation:

a. The same atmospheric pressure that's pushing the window from the outside is also pushing on the window from the inside.  So the forces are balanced.

b. If a strong wind is blowing across the window pane, the pressure will drop, as described by the Bernoulli principle.  So the pressure inside will be greater than the pressure outside, causing the window to bow out a little.

Final answer:

The large force applied by atmospheric pressure does not shatter a window because it is evenly distributed and balanced by internal pressures. A strong wind can change the pressure on the window by creating a differential. Air pressure is considerable but not damaging due to balance with internal body pressure.

Explanation:

Atmospheric Pressure and Its Effect

a) On a quiet day, the atmospheric pressure results in a force of about 100,000 N on a window pane with an area of 1 square meter. This large force does not shatter the window because the pressure is exerted evenly over the entire surface of the window and is balanced by internal pressures within the building.

b) If a strong wind is blowing across the window pane, the pressure on the window will change due to the wind's pressure differential causing a net force that could potentially cause damage if strong enough.

Answer: 1. look past external characteristics and get to know more about people

2. False

Explanation:

1. The learning the past external characteristics and get to know about people who belong to diverse culture and their contribution for the overall society, region, state and nation is likely to bring the spirit of brotherhood. This will raise the feeling of unity and will help in adapting diverse culture.

2. The students of college are likely to get stress due to increase in complexity in studies. Some students also participate in extra-curricular activities along with studies which makes their schedule hectic and tiring this bring stress to their lives.        

R = 899.985Ω.

The ammeter gives a lecture of  I = 0.13A through the resistor and  the voltmeter gives a lecture of V = 117V between the points a and c, the ammeter resistance is Ra = 0.015Ω. So, the voltmeter reading is the sum of the potential difference Vbc (through the ammeter) and Vab (through the resistor).

To obtain the voltage Vbc through the ammeter from its known current and resistance, Ohm's law is used.

Vbc = I*Ra = (0.13A)(0.015Ω) = 0.00195V

Vab = V - Vbc = 117V - 0.00195V = 116.99805V

We know that Vab = I*R. Clear R from the equation:

R = Vab/I = 116.99805V/0.13A = 899.985Ω

Answer:B

Explanation:it’s the answer

Answer:

(i) 140 N/m

(ii) 28 m/s²

Explanation:

(i)

At the top of the jump, the bungee jumper has gravitational potential energy.

At the bottom of the jump, the bungee jumper has elastic potential energy.

mgh = ½ kx²

(60 kg) (9.8 m/s²) (31 m) = ½ k (31 m − 15 m)²

k = 140 N/m

(ii)

At the bottom of the jump:

∑F = ma

kx - mg = ma

(140 N/m) (31 m − 15 m) − (60 kg) (9.8 m/s²) = (60 kg) a

a = 28 m/s²

The spring constant of the bungee cord is approximately found to be 36.75 N/m, and the maximum acceleration experienced by the jumper is approximately 7.6 m/s^2.

To answer the first part of your question: (i) the spring constant of the bungee cord, we will use Hooke's law which states: F = kx. Here, 'F' is the force, 'k' is the spring constant, and 'x' is the distance stretched. Because the bungee jumper is in free fall, the force acting on her is equal to her weight, so F = m*g = 60kg * 9.8m/s^2 = 588N. The distance stretched would be the total distance fallen minus the original length of the cord, so x = 31m - 15m = 16m. Hence, the spring constant k = F/x = 588N / 16m = 36.75 N/m.

For the second part: (ii) the maximum acceleration experienced by the jumper, when the jumper is at the bottom of the fall, the potential energy has completely converted to elastic potential energy. Thus, .5*k*x^2 = m*g*h. Substituting the found values of k and h (total distance), you can solve for the acceleration, which is approximately 7.6 m/s^2.

https://brainly.com/question/34061662

#SPJ3

Answer:

81.1 m

Explanation:

Given:

x₀ = 0 m

y₀ = y = 0 m

v₀ₓ = 29.5 cos 33.0° m/s

v₀ᵧ = 29.5 sin 33.0° m/s

aₓ = 0 m/s²

aᵧ = -9.8 m/s²

Find:

x

First, find the time it takes to land.

y = y₀ + v₀ᵧ t + ½ aᵧt²

0 = 0 + (29.5 sin 33.0) t - 4.9 t²

t = (29.5 sin 33.0) / 4.9

t = 3.28 s

Now in the x direction:

x = x₀ + v₀ₓ t + ½ aₓt²

x = 0 + (29.5 cos 33.0) (3.28) + 0

x = 81.1 m

The outfielder was 81.1 meters away.

The conversion of 3.5 inches to centimeters using the conversion rate of 1 inch equals 2.54 cm results in a value of 8.89 cm.

To convert the measurement from inches to centimeters, we need to use the conversion rate given in the question, i.e., 1 inch equals 2.54 centimeters. In this case, since we have a measurement of 3.5 inches, we multiply 3.5 by 2.54 to find the measurement in centimetres.

So, 3.5 inches * 2.54 cm/inch = 8.89 cm. Therefore, the measurement of 3.5 inches in centimeters is equal to 8.89 cm which corresponds to option B.

So option B.8.89 cm is the correct answer.

https://brainly.com/question/31419854

#SPJ3

Of Hectogram, Dekagram, Decigram, and Microgram, the largest unit is the Hectogram, as it equals 100 grams which is much larger than the other options.

Among the options you provided: Hectogram, Dekagram, Decigram, and Microgram, the largest unit is the Hectogram. Here is why: measuring units in the metric system increase or decrease by powers of 10. A hectogram equals 100 grams which is significantly larger than a Dekagram (10 grams), a Decigram (0.1 gram), and a Microgram (0.000001 gram).

https://brainly.com/question/10753606

#SPJ2

Answer:

The answer is:

c) 9 times

Explanation:

20/60= 3 x 3=9

Answer:

Sedimentary

Explanation:

The process by which rock fragments are moved from the source is Sedimentary.

Answer:

Sedimentary

Explanation:

a process by which rock fragments are moved from the source

Force is a vector, it has direction, it can move objects and it was well described with laws by physicist Isaac Newton by which the units of force were named Newtons (N).

Hope this helps.

r3t40

1 Newton is the force that accelerates 1 kg of mass at the rate of 1 m per sec^2.

In the cgs system, the unit of force is the dyne. That's the force that accelerates 1 gram of mass at the rate of 1 cm per sec^2.

So 1 Newton of force is 100,000 dynes.

Answer:

Every magnet has both a North and a South pole. When you place the North pole of one magnet near the South pole of another magnet, they are attracted to one another. When you place like poles of two magnets near each other (North to North or South to South), they will repel each other.

Answer:

All magnets, regardless of their shape or application, must have two poles, the north pole (N) and the south pole (S), which are called magnetic poles.

Explanation:

Magnets are ferromagnetic materials that have the property of attracting or repelling other magnets. In addition, it is characteristic for materials of this nature (ferromagnetic) to be strongly magnetized in the presence of a magnetic field.

All magnets, regardless of their shape or application, must have two poles, the north pole (N) and the south pole (S), which are called magnetic poles. Another important characteristic of magnets is the inseparability of the magnetic poles, that is, it is not possible to find a magnet with only the north pole or only with the south pole. Thus, when a magnet is broken, it will give rise to two new magnets and the polarity of these new magnets will depend on the way in which it partitioned.

Answer: 3 times more potential energy

Explanation:

Final answer:

Brick 2 has three times more gravitational potential energy than Brick 1, as it is three times higher and both bricks have the same mass. The potential energy is calculated using the formula GPE = mgh.

Explanation:

The question relates to the concept of gravitational potential energy (GPE), which is the energy an object possesses by virtue of its height above the ground and its mass. The formula to calculate GPE is GPE = mass x gravitational field strength (g) x height. For comparable masses, the only variable affecting the potential energy is height. Given that Brick 1 is at 100 feet and Brick 2 is at 300 feet, the potential energy is directly proportional to height since mass and gravitational acceleration are constant.

Therefore, Brick 2 has three times the potential energy of Brick 1 because it is at three times the height (300 feet compared to 100 feet). This relationship is captured by the formula GPE = mgh, where m is the mass, g is the acceleration due to gravity (assumed constant here), and h is the height.

Answer:

-80 J

Explanation:

The first law of thermodynamics states that:

[tex]\Delta U = Q - W[/tex]

where

[tex]\Delta U[/tex] is the change in internal energy of the system

Q is the heat absorbed by the system

W is the work done by the system

In this problem, we have:

Q = -30 J is the heat released by the system (negative because the system releases it)

W = +50 J is the work done by the system on the surrounding (positive since it is done by the system)

Therefore, the change in internal energy is

[tex]\Delta U = -30 J - (+50 J) = -80 J[/tex]

Answer: -80 J

Explanation:

Apply Newton's second law of motion:

F = ma

F = force, m = mass, a = acceleration

Given values:

m = 500kg

a = 5m/s²

Plug in and solve for F:

F = 500(5)

F = 2500N

Choice D

The force that will accelerate a 500kg object at a rate of 5m/s2 is calculated using Newton's second law of motion. By applying the formula Force = Mass x Acceleration, we find that the force needed is 2500 N (Option D).

The force that will accelerate a 500kg object at a rate of 5 m/s2 is calculated using Newton's second law, also known as the law of motion. This law states that the force exerted on an object is equal to the mass of the object multiplied by the acceleration of the object. In this case, we can use this formula: Force = Mass x Acceleration. Substituting the values given, we have Force = 500kg x 5m/s2, which gives us 2500 Newton (N). So, option D (2500 N) is the correct answer.

https://brainly.com/question/33703918

#SPJ3

Answer:

duplicate your results

Explanation:

the results are reliable when you can duplicate the expirement and repeat the results without error.

Answer:

Explanation:

A scientific investigation refers to researches where we apply the scientific method, which is characterized by involving systematic observations, measurements, experimentation, analysis, system of hypothesis, and other elements.

Basically, when we have a hypothesis, we try to prove it developing a scientific investigation which must be defined with the relation between a dependent variable and an independent variable. So, through systematic observations, we study the relation between these variables, experimenting and analysing all results we get from those observations.

So, one important characteristic of scientific investigation is research reliability, which is the degree to which a research produces consistent results, and one ingredient to obtain that it's the posibility of reproducing the results, that is, duplicating them in other contexts. For example, if we study Newton's second law, you will be able to reproduce the results of such law in different contexts.

Therefore, the right answer is "duplicate your results".

Answer:

1.5 m/s²

Explanation:

Draw a free body diagram.  There are three forces acting on the sea lion: gravity pulling down, normal force perpendicular to the ramp, and friction parallel to the ramp.

Sum of the forces perpendicular to the incline:

∑F = ma

N − mg cos θ = 0

N = mg cos θ

Sum of the forces parallel to the incline:

∑F = ma

mg sin θ − Nμ = ma

Substitute for N:

mg sin θ − (mg cos θ) μ = ma

g sin θ − g cos θ μ = a

a = g (sin θ − μ cos θ)

Given θ = 23° and μ = 0.26:

a = 9.8 (sin 23 − 0.26 cos 23)

a = 1.48

Rounded to two significant figures, the sea lion accelerates at 1.5 m/s².

Given:

By using the Newton's second equation, we get

→ [tex]mgSin \Theta-F_k = ma[/tex]

or,

→ [tex]mgSin \Theta-\mu mg Cos \Theta =ma[/tex]

→       [tex]g Sin \Theta-\mu g Cos \Theta =a[/tex]

hence,

The acceleration will be:

→ [tex]a = 9.8 Sin 23^{\circ} - 0.26\times 9.8\times Cos23^{\circ}[/tex]

     [tex]= 1.484 \ m/s^2[/tex]

Thus the above response is correct.

Learn more about newton's law here:

https://brainly.com/question/14050409

Answer:

870 metres

Explanation:

Speed = Distance/Time

Distance = Speed x Time

Distance = 29 x 30

= 870 metres

Answer:

A. Exposing a crystal of a semiconductor to heat or light starts displacing valence electrons, which then move throughout the crystal.

Explanation:

A semiconductor has several properties, the main two are:

1. Under no special treatment and polarization conditions, there can't be current flow through it due to the high resistance.

2. The semiconductor material can have special change in its structure (excess of electron or holes), to be conductive under certain polarization situations.

Final answer:

The correct answer is A, as semiconductors conduct electricity when valence electrons are displaced by heat or light, and these electrons move throughout the crystal. The other options are incorrect; semiconductors are not classified by low resistance, both free electrons and holes are charge carriers in semiconductors, and gold and silver are conductors, not semiconductors.

Explanation:

The correct answer to which of the following is true of semiconductors is A. Exposing a crystal of a semiconductor to heat or light starts displacing valence electrons, which then move throughout the crystal. Semiconductors like silicon have a filled valence band and an unfilled conduction band, with a relatively small energy gap between the two. When moderate amounts of energy, such as heat or light, are provided, electrons can move from the valence band to the conduction band, becoming free to move throughout the crystal and thereby conduct electricity.

Option B is incorrect because semiconductors are not classified by their low resistance, but by their ability to conduct electricity under certain conditions, such as temperature or doping with impurities. Option C is not true, as both free electrons and holes act as charge carriers in a semiconductor. Lastly, option D is incorrect because gold and silver are conductors, not semiconductors. They are known for their excellent ability to conduct electricity due to their many free electrons.

Semiconductors' unique properties are utilized extensively in the creation of integrated circuits (IC) and other electronics, including diodes and transistors that are fundamental to modern technology.

Answer:

I believe the answer is C

Explanation:

For this case we must make a conversion, we have as data that:

1 gallon is equivalent to 3.79 liters

By making a rule of three we have:

1 gallon ------------> 3.79 L

13 gallons --------> x

Where "x" represents the equivalent in liters:

[tex]x = \frac {13 * 3.79} {1}\\x = 49.27[/tex]

So, we have 49.27 liters of gasoline.

Answer:

Option C

Answer:

Electrostatic charges are created by stripping outer electrons from substances - first choice.

The goods and the services make up the basis of every economy. The goods can simply be defined as merchandise or possessions. The services can be defined as the actions through which help is provided, or work is done for someone else. Example of goods are the food and furniture, with the food being crucial for the survival of the people, while the furniture is an essential part of every home and its practicality and decor. Examples of services are teaching and car repairing. The teaching is crucial for the development of the societies, as through it the people get education, while the repairing of cars is very important as lot of people have them, can not afford to buy new ones all the time, and they need for their daily movement over longer distances.

Answer:

3

Explanation:

The mechanical advantage is the ratio of the output force to the input force.

MA = 156 / 52

MA = 3

The mechanical advantage in the scenario provided, where the input force is 52N and the output force is 156N, is calculated to be 3.

The mechanical advantage of a simple machine tells us how many times the input force is multiplied by the machine. To calculate the mechanical advantage (MA), you divide the output force by the input force. Given an input force of 52N and an output force of 156N, the mechanical advantage would be calculated as MA = Output Force / Input Force = 156N / 52N = 3.

Answer:

Explanation:

Stokes' theorem relates a surface integral of a the curl of the vector field to a line integral of the vector field around the boundary of the surface.

Final answer:

Stoke's Theorem relates the integral of differential forms over the boundary of a manifold to the integral of its exterior derivative over the manifold itself, commonly used in vector calculus and differential geometry.

Explanation:

Stoke's Theorem in mathematics is a statement about the integration of differential forms on manifolds, which both simplifies and generalizes several theorems from vector calculus. According to Stoke's Theorem, the integral of a differential form over the boundary of a manifold is equal to the integral of its exterior derivative over the manifold itself. Mathematically, it is expressed as ∫₋Σdω = ∫Σω, where dω is the exterior derivative of the form ω, Σ is the manifold, and ∂Σ is its boundary.

It is a powerful tool in both theoretical and applied mathematics, and in physics, particularly in the fields of electromagnetism and fluid dynamics. In simple terms, it establishes a relationship between the flow of a vector field through a surface and the behavior of the vector field along the boundary of that surface. This theorem is used in the analysis of vector fields and is fundamental in the area of differential geometry.

A transformer consists of two loops of wire with an AC current going through the "primary" loop inducing a voltage, and therefore a current, in the "secondary" loop.

The ratio of the induced voltage in the secondary loop to the voltage in the primary loop is equal to the ratio of the number of turns in the secondary loop to the number of turns in the primary loop.

A step-up transformer is designed to make the induced voltage in the secondary loop greater than the voltage in the primary loop. This requires the primary loop to have fewer turns than the secondary loop.

Choice C

A step-down voltage transformer changes incoming voltage to a lower voltage by having a different number of turns in the primary than in the secondary winding.

A step-down voltage transformer has a different number of turns in the primary than in the secondary winding, which allows it to change the incoming voltage to a lower voltage. Transformers are devices that work with alternating current (AC) voltages, where the current direction and voltage polarity alternates back and forth. The number of windings in the primary and secondary coils determine whether a transformer is a step-up or step-down transformer.

Answer:

A. Their particles are free to move away from each other.

Explanation:

Answer:

Gases and liquids both transmit heat by convection because their particles are free to move away from each other (option A).

Explanation:

Convection is a process in which heat is transferred between two liquid substances, between two gaseous substances or a gas and a liquid when they are at different temperatures. The heat flux is produced from the body with the highest temperature to the substance with the lowest temperature.

The transmission of heat by convection is based on the actual movement of the molecules of a substance. Both liquids and gases are considered fluids where their particles are free to move away and move from each other. In solids particles vibrate around fixed positions and have a fixed volume .

Gases and liquids both transmit heat by convection because their particles are free to move away from each other (option A).