Is there more potentioal energy at the top of bottom of a ramp?
In Step 5, you will calculate H+/OH– ratios for more extreme pH solutions. Find the concentration of H+ ions to OH– ions listed in Table B of your Student Guide for a solution at a pH = 2. Then divide the H+ concentration by the OH– concentration. Record these concentrations and ratio in Table C. What is the concentration of H+ ions at a pH = 2? mol/L What is the concentration of OH– ions at a pH = 2? mol/L What is the ratio of H+ ions to What is the concentration of H+ ions at a pH = 11?
Answer
below
Explanation:
0.01
0.000000000001
10,000,000,000 : 1
Answer:
What is the concentration of H+ ions at a pH = 2?
0.01
mol/L
What is the concentration of OH– ions at a pH =2?
0.000000000001
What is the ratio of H+ ions to OH– ions at a pH =2?
10,000,000,000: 1
Explanation:
A substance with a pH of 9 has
A) no H30+ ions or OH- ions.
B) more H30+ ions than OH- ions.
C) more OH- ions than H30+ ions.
D) the same number of H30+ ions as it does OH- ions.
The four terrestrial planets are so called because they ?
Many dogs have ticks and fleas in their fur. Ticks and fleas feed upon the blood of dogs to get nutrients is that competition, parasitism, mutualism or commensalism
parasitism.
Understanding the Relationship Between Dogs, Ticks, and Fleas
The interaction of ticks and fleas feeding on the blood of dogs is an example of parasitism. In this relationship, the ticks and fleas are considered parasites, benefiting by consuming nutrients from the host, which in this case are the dogs. The host, the dogs, are harmed by this interaction because the parasites can cause discomfort and diseases, such as Lyme disease, which is transmitted by deer ticks. Unlike commensalism, where one organism benefits and the other is unaffected, parasitism negatively impacts the host. Moreover, this is different from mutualism, where both species benefit, and competition, where different species compete for the same resource.
True or false: Being highly creative is a behavior leading to self-actualization.
True.
Self-actualization brings about self-satisfactions and a sense of
self-worth.
When someone is highly creative and creates something successfully, he or she
feels motivated and feels that he or she has finally achieved his or her goal.
Nothing better than this can lead to self-actualization.
The first artificial satellite to be launched into space was called _____________.
Which of these is the best description of the Frye Standard?
A) The procedure that is followed to prepare an examiner for trial.
B) Applying the principle that no two people have exactly the same fingerprints.
C) Determining if an expert witness is in fact an expert and allowing their testimony in court.
D) Deciding if the procedure, principles or techniques in question in a forensic case are generally accepted by the relevant scientific community.
Which technique is used to compare ink on a suspect document?
A) thin-layer chromatography
B) infrared spectrophotometry
C) blotting with alcohol method
D) ultraviolet spectrophotometry
At what point in a trial process can a plea bargain no longer be entered?
A) when the jury considers the verdict
B) before opening statements
C) after the prosecution rests
D) when the defense rests
Answer:
1. Option D) Deciding if the procedure, principles or techniques in question in a forensic case are generally accepted by the relevant scientific community.
2. Option A) thin-layer chromatography
3. Option A) when the jury considers the verdict
Explanation:
1. The Frye Standard is a procedure to determine if the piece of evidence is admissible in a court of law. This is a rigorous test to test how well the evidence can be used against a criminal or prove a case in the court of law. This came after a ruling that an experts advice only was insufficient to prove a case.
2. Thin layer chromatography is used to separate the ink components. This is because the ink is made of different components that have different volatlitities and solublies in the alcohol solution. The inks can be compared by looking at the partitioning coefficient and comparing the two distances traveled by the components.
3. The guilty cannot plead a case when the verdict has been given. At that moment, the case is closed.
The Frye Standard is used in court to determine if the procedure, principles, or techniques in a forensic case are generally accepted by the scientific community. This standard ensures the admissibility of expert testimony.
The best description of the Frye Standard is determining if the procedure, principles or techniques in question in a forensic case are generally accepted by the relevant scientific community. This standard is used to determine the admissibility of expert testimony in court. The Frye Standard requires that the scientific community generally accepts the technique before allowing it as evidence.
Learn more about Frye Standard here:https://brainly.com/question/31748908
#SPJ6
The direction of the buoyant force on an object placed in fluid is
An automobile starter rated at 2.25 hp draws how many amps from a 10.0 V battery?
An automobile starter rated at 2.25 hp (which converts to 1683.5 Watts) would draw approximately 168.35 Amps from a 10.0 Volt battery.
Explanation:The question is asking how many amps an automobile starter rated at 2.25 horsepower would draw from a 10.0 Volt battery. We can start by converting the horsepower to watts - as 1 horsepower is approximately 746 watts (2.25 hp = 1683.5 W).
Using the power formula in physics, P = IV where P is the power (in watts), I is the current (in amperes) and V is the voltage (in volts), we can calculate the current, I = P/V. That gives I = 1683.5 W / 10.0 V = 168.35 Amps. Hence, The starter would draw approximately 168.35 Amps from the battery.
Learn more about Electric Current here:https://brainly.com/question/2264542
#SPJ12
What is planck's constant? choose 2 answers. a when the energy e of a photon is multiplied by its frequency f b 6.623 x 10-34 j.s c when the energy e of a photon is divided by its frequency f d 6.022 x 1023?
I would love to stretch a wire from our house to the Shop so I can 'call' my husband in for meals. The wire could be tightened to have a tension of 240N and a m/L 'weight' of 0.05kg/L. How long would it take for my pulse wave to travel to the Shop (24m) to ring a bell to indicate dinner time.
What are the coefficients that would balance the following chemical equation? ___KClO3 → ___KCl + ___O2
Saturn's moon Mimas has an orbital period of 82,800 s at a distance of 1.87x10^8m from Saturn. Using m central m= (4n^2d^3/GT^2) 1 determine Saturn's mass.
Determine Saturn's mass by rearranging Newton's version of Kepler's Third Law.
Answer:
[tex]5.65\times 10^{26} kg[/tex]
Explanation:
From Kepler's third law: Mass of the planet is given by:
[tex] M = \frac{4\pi ^2d^3}{GT^2}[/tex]
where, T is the time period of satellite revolving about the planet at a distance d. G is the gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg²
Given, d = 1.87 × 10⁸ m
T = 82800 s
⇒[tex] M = \frac{4\pi ^2 (1.87\times 10^8)^3}{(6.67\times 10^{-11})(82800)^2}=5.65\times 10^{26} kg[/tex]
A ray of light traveling in air strikes the surface of a liquid. if the angle of incidence is 31.7◦ and the angle of refraction is 21.3◦ , find the critical angle for light traveling from the liquid back into the air. answer in units of ◦ .
Which term is defined as the ratio of the speed of light in a vacuum to the speed of light in the material it is passing through?
A. index of refraction
B.index of reflection
C.angle of reflection
D.angle of incidence
Why did the magnitude of the doppler shift increase as the velocity of the sound source increased?
Explanation:
Doppler effect: It is the phenomenon in which there is relative motion between the source and the observer or the source and the listener. There is an apparent change in the frequency.
When the observer and the source are moving towards each other then the frequency increases.
When the observer and the source are moving away from each other then the frequency decreases.
The expression of the speed of the wave in terms of the frequency is as follows;
[tex] v=f\lambda[/tex]
Here, v is the speed of the wave, f is the frequency of the wave and [tex]\lambda[/tex] is the wavelength of the wave.
From the above relation, it can be concluded that speed of the sound is directly proportional to the frequency of the wave.
The magnitude of the Doppler shift increases when the velocity of the sound source is increased.
There are different kinds of effects. The effect of the increasing the velocity of the sound source on the magnitude of the Doppler shift is that the faster the source is, the greater the shift.
Doppler effectThis is known as the process whereby a relative motion is known to exist between the source and the observer or between the source and the listener.
The Doppler effect is seen if the speed of the source is said to be approaching slower than the speed of the waves.
When the source is said to moves at the same speed as or even faster than the wave itself can move, a different kind of situation is seen.
Learn more about Doppler effect from
https://brainly.com/question/1330077
Which of the following statements about diodes and triodes is correct
Answer:
Diodes, which are often utilized as rectifiers, have two electrodes.- is correct
Explanation:
I took rhe test so just just trust me
The speed of a wave is 65 m/sec ifthe wavelength of the wave is 0.8 meters what is the frequency of yhe wave
The speed of light of a ray of light traveling through a distance having an absolute index of refraction of 1.1 is?
From the question, the refractive index is 1.1
The constant distance is 299,792,458 m
Therefore, speed of light is distance travelled/refractive index
= (299,792,458 m/s) / 1.1 = 272,538,598 m/s
The speed of light is 272,538,598 m/s
What is speed of light?The speed of light is the average distance light waves is travelling through a medium at an average period of time.
Therefore, The speed of light is 272,538,598 m/s.
Learn more about speed of light below.
https://brainly.com/question/100983
#SPJ2
If one light bulb burns out in a string of lights, and the rest stay lit, it is reasonable to assume that the lights are wired in
Answer:
Series
Explanation:
hdurhuehufeuehueheufhfeuhf
A heat-conducting rod consists of an aluminum section, 0.30 m long, and a copper section, .70m long. Both sections have a cross-sectional area of 4 · 10⁻⁴m² The aluminum end of the rod is maintained at a temperature of 10°C, while the copper end is maintained at 160°C. What is the temperature at the point where the aluminum and copper sections meet? The thermal conductivity of aluminum is 205 W/m ∙ K, and of copper is 385 W/m ∙ K.
77°C
60°C
71°C
65°C
55°C
The energy an object possesses due to its form and position is know as
What kind of circuit is the one shown below?
Answer:
The given circuit diagram shows parallel circuit.
Explanation:
In this circuit diagram two bulbs are connected in parallel combination because current flows from the battery gets bifurcated at the junction. Thus, two bulbs are connected in parallel combination.
This parallel combinations of bulbs then connected to the battery given in the diagram. So, the combinations of bulbs are connected in parallel combinations with the battery.
Hence, both bulbs and battery are connected in parallel combinations with each other.
The circuit diagram shown in figure is parallel.
Answer:
The given circuit is in
Series circuit is the one in which there is more than one resistor.
Combination circuit is the one in which gates are used to form the circuit.
Open circuit is the one in which there is no battery.
Parallel circuit is one in which current is divided in different paths.
Here, we can see that we have a battery in the circuit that means it is closed circuit.
And Current is divided that means it is parallel combination.
Therefore, Option D is correct that is parallel.
that which travels in waves that are not the same length is called
a 4.0 kg object is acted upon by a 20 n force to the right and a 25 n force to the left. what is the magnitude of the objects accerlation
A cube shaped pool is half full of water. if the water is 3 feet deep, what is the volume when the water is all the way to the top?
The volume of the cube-shaped pool when filled to the top is 27 cubic feet, as the cube has a side length of 3 feet.
To determine the volume of a cube-shaped pool when it is filled to the top, given that the water is currently 3 feet deep and at half capacity, we can apply the formula for the volume of a cube: Volume = length times width times height. Since the pool is half full, and given that the height of the water is 3 feet, it means that the length of a side of the cube is also 3 feet, as it is a cube shaped pool.
Therefore, the volume of the pool when full would be:
Volume = 3 feet times 3 feet times 3 feet = 27 cubic feet.
This calculated volume represents the pool's total capacity, assuming it's filled all the way to the top.
What is the power generated by a 45 kg person who walks up a flight of 12 stairs, each 30 cm high, in 12 s?
A.13.5 W
B.132.3 W
C.1,350 W
D.13,230 W
How much energy is needed to increase the temperature of 755g of iron from 283k to 403k ?
To find the energy needed to increase the temperature of 755 g of iron from 283 K to 403 K, we use the specific heat capacity of iron (0.449 J/g °C) and the formula q = mcΔT. After converting the temperatures to Celsius, the calculation shows that 40,714 joules of energy is required.
Explanation:The question asks how much energy is required to increase the temperature of a specific mass of iron. The calculation involves using the formula for heat energy, which is q = mcΔT. The specific heat (c) of iron, the mass (m) of the iron object, and the change in temperature (ΔT) are required to find the total amount of energy needed.
To calculate the energy needed to increase the temperature of 755 g of iron from 283 K to 403 K, we use the specific heat capacity of iron, which is given as 0.449 J/g °C in a comparable example. First, we convert the temperatures from Kelvin to Celsius by subtracting 273 from both temperatures. This gives us a starting temperature of 10 °C and an ending temperature of 130 °C. The change in temperature is then 130 °C - 10 °C = 120 °C.
Using the formula q = mcΔT, where
m = 755 g (mass of iron),
c = 0.449 J/g °C (specific heat capacity of iron),
ΔT = 120 °C (change in temperature),
we can calculate the energy required as:
q = (755 g) x (0.449 J/g °C) x (120 °C) = 40,714 J
This means that 40,714 joules of energy is needed to increase the temperature of 755 g of iron from 283 K to 403 K.
Which of the following correctly describes a solenoid?
A) The magnetic field around a solenoid is unipolar.
B) The field around a solenoid is termed a bar magnet.
C) A solenoid is created by winding current carrying wire into a coil.
D) Increasing the current in the wires will reduce the magnetic field outside of the solenoid.
Answer;
C) A solenoid is created by winding current carrying wire into a coil.
Explanation;
-A solenoid is a coil of insulated or enameled wire wound on a rod-shaped form made of solid iron, solid steel, or powdered iron.
-Solenoids have a wide range of applications, for instance they are used as electromagnets, as inductors in electronic circuits, and as miniature wireless receiving antennas.