Answer: The new pressure will be half of the original pressure.
Explanation:
To calculate the pressure change, we use the equation given by Boyle's law. This law states that pressure is inversely proportional to the volume of the gas at constant temperature.
The equation given by this law is:
[tex]P_1V_1=P_2V_2[/tex]
where,
[tex]P_1\text{ and }V_1[/tex] are initial pressure and volume.
[tex]P_2\text{ and }V_2[/tex] are final pressure and volume.
We are given:
[tex]V_2=2V_1[/tex]
Putting values in above equation, we get:
[tex]P_1\times V_1=2V_1\times P_2\\\\P_2=\frac{P_1\times V_1}{2V_1}\\\\P_2=\frac{P_1}{2}[/tex]
Hence, the new pressure will be half of the original pressure.
what is the molarity of a solution of calcium chloride which contains 33500mg of solute in total volume of 0.352L?
how many moles of barium hydroxide, Ba(OH2), would be required to react with 117 g hydrogen bromide, HBr?
The correct calculation yields 0.724 moles of Ba(OH)₂, not 2.93, indicating a mistake in the given answer's stoichiometry interpretation.
To react completely with 117 g of hydrogen bromide (HBr), 2.93 moles of barium hydroxide (Ba(OH)2) would be required.
First, we need to write the balanced chemical equation for the reaction between barium hydroxide and hydrogen bromide:
[tex]\[ \text{Ba(OH)}_2 + 2\text{HBr} \rightarrow \text{BaBr}_2 + 2\text{H}_2\text{O} \][/tex]
From the balanced equation, we can see that 1 mole of barium hydroxide reacts with 2 moles of hydrogen bromide.
Next, we need to calculate the number of moles of hydrogen bromide (HBr) present in 117 g. The molar mass of HBr is 80.91 g/mol (1.008 g/mol for H and 79.90 g/mol for Br).
[tex]\[ \text{moles of HBr} = \frac{\text{mass of HBr}}{\text{molar mass of HBr}} \][/tex]
[tex]\[ \text{moles of HBr} = \frac{117 \text{ g}}{80.91 \text{ g/mol}} \][/tex]
[tex]\[ \text{moles of HBr} =1.448 \text{ moles} \][/tex]
Now, using the stoichiometry of the balanced equation, we can find the moles of barium hydroxide required:
[tex]\[ \text{moles of Ba(OH)}_2 = \frac{1}{2} \times \text{moles of HBr} \][/tex]
[tex]\[ \text{moles of Ba(OH)}_2 = \frac{1}{2} \times 1.448 \text{ moles} \][/tex]
[tex]\[ \text{moles of Ba(OH)}_2 =0.724 \text{ moles} \][/tex]
However, the given answer is 2.93 moles, which suggests that there might be a mistake in the calculation. Let's re-evaluate the moles of HBr:
[tex]\[ \text{moles of HBr} = \frac{117 \text{ g}}{80.91 \text{ g/mol}} \][/tex]
[tex]\[ \text{moles of HBr} =1.448 \text{ moles} \][/tex]
Since the stoichiometry of the reaction is 1 mole of Ba(OH)2 to 2 moles of HBr, the correct calculation for the moles of Ba(OH)2 required should be:
[tex]\[ \text{moles of Ba(OH)}_2 = 1.448 \text{ moles HBr} \times \frac{1 \text{ mole Ba(OH)}_2}{2 \text{ moles HBr}} \][/tex]
[tex]\[ \text{moles of Ba(OH)}_2 = 0.724 \text{ moles} \][/tex]
It appears that the provided answer of 2.93 moles of Ba(OH)₂ is incorrect based on the stoichiometry of the reaction and the calculations performed. The correct answer should be 0.724 moles of Ba(OH)₂. There seems to be a discrepancy between the provided answer and the calculated result. The correct answer, based on the calculations, is 0.724 moles of barium hydroxide, not 2.93 moles.
what are atoms help
a b c d no a no b yes c no d ok
what is the simplest alkane
Answer: C. Methane
Explanation:
You are given the percent by mass of the elements in a compound and wish to determine the empirical formula. Label each of the following statements as true or false and explain your answers.
a. You must assume exactly 100.0 g of the
compound.
b. You must convert percent by mass to relative
numbers of atoms.
c. You must divide all of the percent by mass
numbers by the smallest percent by mass.
d. You cannot solve for the emp
please please help with this chemistry questions!!!
Answer:
7. 40°C
8. 6.67°C
Explanation:
7. 20*2=40°C
8. The balloon has reduced in size by 3 times. So, the collision ant the temperature must be 3 times less. So =20/3= 6.67°C
Andrea is performing an experiment in which she needs to know when a strong acid is present. She is not sure which indicator to use, so she looks up the following table in her science textbook.
Indicator pH range
thymol Blue 1.2 - 2.8
phenol Red 6.4 - 8.0
phenolphthalein 8.0 - 10.0
trinitrobenzoic acid 12.0 - 13.4
According to the textbook, which indicator should Andrea use?
Hint: Neutral substances have a pH of 7. Acids have a pH that is less than 7, and bases have a pH that is greater than 7.
A.
phenolphthalein
B.
phenol Red
C.
thymol Blue
D.
trinitrobenzoic acid
Reset Submit
Answer:
c- thymol blue
Explanation:
study island
According to the textbook, the indicator that should Andrea use is thymol blue. Thus, the correct option for this question is C.
What is Strong acid?Strong acid may be defined as a type of acid that is completely dissociated or ionized in an aqueous solution. It is a type of chemical species that typically have the ability to lose a proton, H+. Examples of strong acids include sulphuric acid, hydrochloric acid, nitric acid, etc.
Acids range the pH lower than 7. While exactly 7 is a neutral compound. In the experiment, Andrea was required to know when a strong acid is present, so she utilizes an indicator. For this, she used the indicator that has the pH of strong acid.
Among the options given above, the indicator thymol blue demonstrates the same qualities and characteristics.
Therefore, the indicator that should Andrea use is thymol blue. Thus, the correct option for this question is C.
To learn more about Strong acids, refer to the link:
https://brainly.com/question/28349000
#SPJ2
a sample of methane gas having a volume of 2.8 L at 25°C and 1.65 atm was mixed with a sample of oxygen gas having a volume of 35L at 31°C and 1.25 atm. The mixture was ignited to form carbon dioxide and water. Calculate the volume of carbon dioxide formed at a pressure of 2.5 atm and a temperature of 125°C
[tex]\left[\begin{array}{cccc}&Volume(L)&Pressure(atm)&Temperature(K)\\Methane&2.8&1.65&298\\Oxygen&35&1.25&304\end{array}\right][/tex]
note: K = C° + 273 (Temperature conversion, Celsius to Kelvin)
Find moles of methane and oxygen:note: [tex]Ideal \ Gas \ Law: \ PV=nRT \ \ \ (R = 0.082 \ \frac{L \times atm }{K \times mol} )[/tex]
Formula to find moles is: [tex]n=\frac{PV}{RT}[/tex]
[tex]\space \\CH_{4} \ : \ n = \frac{1.65 \times 2.8}{298 \times 0.082} = 0.19\ mol \ (limiting \ reactant)[/tex]
[tex]O_{2} \ : \ n = \frac{1.25 \times 35}{304 \times 0.082} = 1.75\ mol \ (2 \times 0.19 = 0.38 \ mol \ is \ enough)[/tex]
note: moles of CO₂ is the same as of CH₄, as can be seen from the chemical equation above, which is 0.19 mol.
Find volume of CO₂:[tex]\left[\begin{array}{ccccc}&Volume(L)&Pressure(atm)&Temperature(K)&Moles(mol)\\CO_{2} &?&2.5&398&0.19\end{array}\right][/tex]
Formula to find Volume is: [tex]V=\frac{nRT}{P}[/tex]
[tex]CO_{2} \ : \ V = \frac{0.19 \times 0.082 \times 398}{2.5} = 2.48 \ L[/tex]
So, the answer is: 2.48 LWhen heat flows into a system its value is _ when heat flows out of a system its value is negative
Heat is the amount of energy transferred from and to the object or the substance of the system. When heat flows into a system its value is positive.
What are free energy changes and enthalpy?Change in the free energy of the system is shown as [tex]\rm (\Delta G)[/tex] it tells about the reversible work performed by the system in thermodynamically constant pressure and temperature.
The enthalpy is equal to the heat formation and is shown as [tex]\rm (\Delta H)[/tex]. It represents the total heat content of the reaction and enthalpy change of the final and the initial system.
Q or the heat when flows in the system for the reaction is a positive value as the energy of the system gets increased while when the heat is released from the reaction then the value is negative as the energy decreases.
Therefore, heat transfer to the system is positive.
Learn more about the heat here:
https://brainly.com/question/10497663
When a spacecraft travels away from Earth, the gravitational force acting on it (2 points)
decreases first and then increases
increases first and then decreases
increases
decreases
Answer:
The gravitational force acting on it decreases.
There are many methods used to obtain energy for use in our daily lives. Some of these methods have possible environmental consequences to rivers, groundwater, and organisms. One type of pollution involves excess carbon dioxide being released into the air. Some of the carbon dioxide reacts with water to form acid rain. Which energy sources can release carbon dioxide and carbon monoxide waste into the atmosphere?
A) wind and solar
B) wind and nuclear
C) solar and nuclear
D) coal and petroleum
which planet has the presence of liquid water, a period of rotation equal to 24 hours, and a solid inner core
Earth is the only planet in our solar system with large amounts of liquid water, a solid inner core, and a 24-hour rotation period, making it uniquely capable of supporting life.
The planet that matches the criteria mentioned in the question is Earth. Earth is the third planet from the Sun and the only one we know of that has large amounts of liquid water, an atmosphere with oxygen, and is suitable for life. Earth also has a solid inner core, a surface mostly covered with water, and a period of rotation approximately equal to 24 hours. Unlike Venus, which rotates slowly in the opposite direction, and Mars with its red soil and ice caps, Earth has conditions considered 'just right' for development and sustenance of life.
Furthermore, the outer planets are gas giants and significantly different from Earth. They do not have solid surfaces or conditions that would allow for the presence of liquid water as we know it. Earth's moon, which is large and round, is unique among the inner planets. The combination of these features validates that Earth is the planet being described.
What is an abiotic factor in a squirrel's habitat that could be harmful if the factor changed
Which object in the diagram represents earths moon
Infer if the mineral Talc would be a good choice when building a statue outside. Justify your answer with your knowledge of minerals and acid/bases. According to your data, would there be a better mineral to use? If so, which one and why?
How are the sparks from a sparkler that strike your skin akin to tiny droplets o boiling water striking your skin?
Final answer:
The sparks from a sparkler and tiny droplets of boiling water both have high thermal energy, transferring this energy to the skin upon contact, causing a burn. A static electricity spark from a doorknob is too brief to harm you. Steam burns are worse than boiling water because of the release of latent heat.
Explanation:
When a sparkler comes into contact with your skin, the hot sparks cause a sensation similar to tiny droplets of boiling water hitting your skin. Both the sparks and the boiling water droplets have a high amount of thermal energy. When they come into contact with your skin, they transfer some of this energy to your skin cells, causing a burn. The transfer of energy in both cases is rapid and occurs over a very small area of contact, leading to a high concentration of energy which can be quite painful.
In the case of a static electricity spark from a doorknob, which can carry a few hundred watts of power, the reason you're not injured is that the spark is very brief. It doesn't last long enough to transfer a significant amount of energy to cause harm. The situation is unlike with a sustained contact with something hot, where energy transfer is more prolonged.
Similarly, when steam condenses on your skin, it releases latent heat, which causes a burn. The latent heat is the energy that was used to break the hydrogen bonds when turning water into steam. When steam condenses back to water on your skin, it releases this energy, causing a more severe burn than boiling water would at the same temperature.
_______ reaches the Earth's surface through _______, then turns into _______.
Answer:
Magma, Volcano, Lava
Explanation:
During the time of convergence of two plates, the subduction zone is created due to the sinking of the heavier plate below the lighter one. The long, narrow depression, commonly known as trench forms above this zone of subduction.
As the heavier plate goes down, it melts and mixes with the magma. This magma then rises upward due to the force exerted by the large convection currents, which eventually reaches the earth's surface towards the over-riding plate, giving rise to the formation of volcanoes.
When the uplifting of magma is large and rapid, then it erupts on the surface, and undergoes solidification, forming lava.
Thus, the magma reaches the surface of the earth through the formation of volcano and solidifies as lava.
I have a question. Say my two dogs mated but they were of different breeds. The male was a poodle and the female was a terrier. What are the chances the pup will grow to be as tall as a poodle or as small as a terrier
Final answer:
When a poodle and a terrier mate, the size of their puppies can vary, and traits such as size are influenced by multiple genes from both breeds.
Explanation:
The specifics of how traits such as size are inherited in dogs can be quite complex because they are influenced by multiple genes, and these genes can have different modes of inheritance. When a poodle mates with a terrier, the offspring, which is a mixed breed or a crossbreed like the known cockapoo, will inherit a combination of traits from both parents. The size of the puppies can vary and may be somewhere in between the sizes of the parent breeds. To predict the exact size of the puppies, one would need information on the specific genes that determine size in both the poodle and the terrier, and how they interact when combined. While domestic dogs display a wide range of physical characteristics, most dogs of different breeds are capable of interbreeding and producing viable offspring.
Will mark as Brainliest.
In a calorimeter, 1.0 kg of ice melts at 0 degrees Celisius. The enthalpy of fusion of the ice is 334 J per g. How much heat was absorbed?
33.4 kJ
33.4 J
Please explain your answer.
Exactly what the other guy said except its in kJ on k12. So 0.33 kJ
Subtract 5.01x10^7-30x10^-9
35 is the answer
hope im right
What is the consumption of dietary supplememts considered risky
Hello there!
Sometimes it is good to go on a diet for us. Other times, (we may not realize it), but it can be risky for our health and bodies. While getting more vitamins can be healthy and good for us, too much of the same vitamins in our body can be unhealthy, and even cause scary side effects. Do not be misled, the title “vitamin”, does not mean “use generously”. Just as we are to limit our eating of unhealthy foods, we need to limit our use of just vitamins as well.
For example, while vitamin A can be beneficial for our bodies in some ways, too much of it can liver damage, headaches, reduce bone strength, and in very serious cases even birth defects to children, or one conceiving a child. Yes, we need just enough to keep us healthy an active. There can only be so many problems with the human body, and using too many dietary supplements should not be one of them.
Hope this helps!
~DL
What is the molarity of the solution formed by mixing 0.20mol of sodium hydroxide with enough water to make 150 ml of solution?
The molarity of the solution formed by mixing 0.20 mol of sodium hydroxide with enough water to make 150 ml of solution is 1.33 M.
Explanation:To find the molarity of the solution formed by mixing 0.20 mol of sodium hydroxide with enough water to make 150 ml of solution, you need to calculate the number of moles of sodium hydroxide and then divide it by the volume of the solution in liters. Firstly, convert the volume of the solution to liters by dividing it by 1000. Then, divide the number of moles of sodium hydroxide by the volume of the solution in liters to get the molarity.
Molarity (M) = moles of solute / volume of solution (in liters)
Molarity = 0.20 mol / (150 mL / 1000) = 1.33 M
Learn more about Molarity of a solution here:https://brainly.com/question/18648803
#SPJ11
which subatomic particles would be found orbiting around the nucleus?
The electron.
Hope this helped! :)
there are 125 lima beans 56 garbanzo beans 39 kidney beans and 144 green peas in a container. find the percent by number of green peas in the container, explain why.
The total count of the beans and peas in the container is 364 and green peas are 144 out of these. The percentage of green peas in the container is (144/364) * 100 = 39.56%.
Explanation:To calculate the percentage of green peas amongst all the beans and peas in the container, we firstly need to total all the different type of beans and peas, and then calculate what percent of that total is made up of green peas.
Firstly, calculate the total count: 125 lima beans + 56 garbanzo beans + 39 kidney beans + 144 green peas = 364 items in total.
Next, use the formula for calculating percentages: (part/total) * 100. In this case, the 'part' is the number of green peas (144) and the 'total' is the total number of items (364). So the calculation will be: (144/364) * 100 = 39.56%. Hence, the green peas make up approximately 39.56% of the total count of beans and peas in the container.
Learn more about Percentage Calculation here:https://brainly.com/question/32197511
#SPJ12
This is Stoichiometry and I need part 2 and 3
Answer:
did u get it
Explanation:
Someone help me please!
Explain what happens when two light waves traveling from the same direction of displacement meet.
Explain how the law of conservation of mass allows you to predict the total Mr of the products.
Mass is never lost or gained in chemical reactions. So we can say that mass is always conserved. In other words, the total mass of products at the end of the reaction is equal to the total mass of the reactants at the beginning.
This fact allows you to work out the mass of one substance in a reaction if the masses of the other substances are known.
Na2SO4 is dissolved in water to make 450 mL of a 0.250 M solution. What is the molar mass of Na2SO4, and how many moles are needed?
how many grams are there in 0.250 moles of sodium hydroxide
Answer: The mass of sodium hydroxide is 10 grams.
Explanation:
To calculate the mass of a substance, we use the equation to calculate the number of moles, we get:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
We are given:
Moles of sodium hydroxide = 0.25 mol
Molar mass of sodium hydroxide = 40 g/mol
Putting values in above equation, we get:
[tex]0.25=\frac{\text{Mass of sodium hydroxide}}{40g/mol}\\\\\text{Mass of sodium hydroxide}=10g[/tex]
Hence, the mass of sodium hydroxide is 10 grams.