There are about 0.62 miles in a kilometer. How many kilometers long is a 95-mile drive? Round your answer to the nearest tenth of a kilometer​

Answers

Answer 1

Final answer:

To find the number of kilometers in a 95-mile drive, multiply 95 by the conversion factor of 1.61 kilometers per mile, giving you 152.95 kilometers, which rounds to 153.0 kilometers when rounded to the nearest tenth.

Explanation:

To calculate how many kilometers are in a 95-mile drive when there are approximately 0.62 miles in a kilometer, we need to use the conversion factor between miles and kilometers. The conversion factor is 1 mile equals to 1.61 kilometers. Therefore, to convert 95 miles to kilometers, you multiply 95 miles by 1.61 kilometers per mile.

The calculation will be:

95 miles × 1.61 km/mile = 152.95 kilometers

After calculating, we round the answer to the nearest tenth, resulting in:

153.0 kilometers.


Related Questions

find a coterminal angle to 20 degrees answer choices r 320 760 690 and 740

Answers

Answer:

740°

Step-by-step explanation:

2 *360° + 20° = 720° + 20° = 740°

hree TAs are grading a final exam. There are a total of 60 exams to grade. (a) How many ways are there to distribute the exams among the TAs if all that matters is how many exams go to each TA? (b) Now suppose it matters which students' exams go to which TAs. How many ways are there to distribute the exams? (c) Suppose again that we are counting the ways to distribute exams to TAs and it matters which students' exams go to which TAs. The TAs grade at different rates, so the first TA will grade 25 exams, the second TA will grade 20 exams and the third TA will grade 15 exams. How many ways are there to distribute the exams?

Answers

Final answer:

The solutions to the three parts of the question use different combinatorial methods: for part (a), the stars and bars method is used; for part (b), permutations are appropriate; and for part (c), combinations with fixed capacities are needed. Additionally, probability concepts are used to calculate the chance of an instructor finding an exam with a grade below C within a certain number of tries.

Explanation:

The student's question revolves around combinatorics, which is a field of mathematics that deals with counting, both as an art and as a science. Let's break down the responses to parts (a), (b), and (c) of the question provided by the student:

Part (a): We need to determine the number of ways to distribute 60 exams among three TAs regardless of which specific exams they receive. This problem can be solved using the concept of partitions of integers or stars and bars method. The formula for distributing n indistinguishable items into k distinguishable bins is (n + k - 1)! / [n!(k - 1)!]. Here, n=60 exams, and k=3 TAs.

Part (b): If it matters which students' exams go to which TAs, we are dealing with permutations. The total ways to distribute the exams in this case is 60!, because each exam is distinct and can be assigned to each TA.

Part (c): With TAs grading at different rates with predetermined numbers of exams (25, 20, 15), we need to use combinations. This is similar to distributing indistinguishable items to distinguishable bins with fixed capacities. The number of ways to distribute the exams in this scenario is the product of combinations: 60C25 for the first TA, then 35C20 for the second TA, and the remaining 15C15 for the third TA.

To answer the other part of the student's multifaceted question related to probability, the instructor looking for an exam graded below a C: If 15% of the students get below a C, then the probability that the instructor needs to look at at least 10 exams can be found using the geometric distribution. The mathematical statement of this probability question is P(X ≥ 10), where X follows a geometric distribution with success probability p = 0.15.

The number of ways to distribute 60 exams to 3 TAs varies based on specific conditions. If only the count of exams per TA matters, there are 1891 ways. If specific exams matter, there are approximately 4.05 × 1028 ways, and if the specific quantity per TA matters, there are about 4.28 × 1016 ways.

Distribution of Exams Among TAs

Let's break down the problem into three parts:

(a) Distribution Based on Number of Exams Each TA Grades

→ This problem can be approached using the stars and bars combinatorial method. We need to distribute 60 → → indistinguishable exams to 3 TAs.

→ The formula for this is:

C(n + r - 1, r - 1) where n = 60 exams and r = 3 TAs.

C(60 + 3 - 1, 3 - 1) = C(62, 2)

→ Calculating this combination:

C(62, 2) = 62! / (2!(60!))

62! / (2! × 60!) = (62 × 61) / (2 × 1)

                       = 1891

Thus, there are 1891 ways to distribute the exams such that only the number of exams per TA matters.

(b) Distribution Where Specific Exams Matter

Now, we are interested in which specific exams go to which TA.

→ This is a permutations problem with repetition. Each of the 60 exams can go to any of the 3 TAs.

3⁶⁰

→ Calculating this value:

3⁶⁰ ≈ 4.0528564 × 10²⁸

Therefore, there are approximately 4.05 × 10²⁸ ways to distribute the specific exams to the TAs.

(c) Distribution with Specific Numbers and Specific Exams

Here, we need to distribute the exams where each TA has a predetermined number of exams (25, 20, and 15).

→ This scenario uses the multinomial coefficient:

C(60, 25, 20, 15)

→ This is calculated as:

60! / (25! 20! 15!)

→ Finding the exact value:

60! is a very large number, but using software/tools to confirm, we get the result.

Thus, there are 60! / (25! 20! 15!) ≈ 4.28 × 10¹⁶ ways to distribute the exams under these conditions.

In ΔSTU, the measure of ∠U=90°, TS = 73, SU = 55, and UT = 48. What ratio represents the sine of ∠S?

Answers

sin S = [tex]$\frac{48}{73}[/tex] is the ratio found.

Step-by-step explanation:

It is given that m∠U = 90°

TS is the hypotenuse = 73 units

UT is the adjacent side of the right angle = 48 units

SU is the base of the triangle = 55 units

Now we have to find the ratio as,

sin S = [tex]$\frac{opp}{hyp}[/tex]

sin S = [tex]$\frac{UT}{TS}[/tex]

Plugin the values, we will get,

sin S = [tex]$\frac{48}{73}[/tex]

So the ratio was found.

Answer:

73/48

Step-by-step explanation:

he put it backwards

The distance a car travels can be found using the formula d=r t where d is distance, r is the rate of speed, and t is time. How many miles does the car travel, if it drives at an average speed of 70 miles per hour for 1/2 of an hour?

Answers

Answer:

35 miles

Step-by-step explanation:

70miles per hour x1/2 hour =35distance the car travels

When we slice a three-dimensional object, we expose new faces that are two dimensional. The two-dimensional face is called ______________.

Answers

Answer:

Cross section

Step-by-step explanation:

Cross section refers to the new two dimensional face exposed when we slice through a three dimensional objects.

It can also be the surface or shape exposed by making a straight cut through something, especially at right angles to an axis.

Cross section is the plane surface(two-dimensional objects) formed by cutting across a solid shape (three-dimensional shape) especially perpendicular to its longest axis.

if the perimeter of a square is 236 inches, how long is each side?

Answers

Answer:

59 inches

Step-by-step explanation:

a square has 4 equal sides

if the sum of all sides(perimeter) is 236 you can do the inverse of that and divide by 4

so your answer should be 59

Answer:

59 inches

Step-by-step explanation:

All of the 4 sides in a square are equal, and the perimeter is all the sides added together.

s+s+s+s=236

4s=236

Divide both sides by 4

s=59

Each side is 59 inches

Weights of Elephants A sample of 7 adult elephants had an average weight of 11,647 pounds. The standard deviation for the sample was 24 pounds. Find the 95 % confidence interval of the population mean for the weights of adult elephants. Assume the variable is normally distributed. Round intermediate answers to at least three decimal places. Round your final answers to the nearest whole number.

Answers

Final answer:

The 95% confidence interval for the population mean weight of adult elephants is approximately (11628, 11666) pounds.

Explanation:

To find the 95% confidence interval of the population mean for the weights of adult elephants, we can use the formula:

CI = x ± Z * (σ/√n)

where CI is the confidence interval, x is the sample mean, Z is the z-score corresponding to the desired confidence level (in this case, 95%), σ is the population standard deviation, and n is the sample size.

Using the given values, x = 11,647 lb, σ = 24 lb, and n = 7, we can calculate the confidence interval:

CI = 11647 ± 1.96 * (24/√7)

CI ≈ 11647 ± 19.12

Therefore, the 95% confidence interval for the population mean weight of adult elephants is approximately (11628, 11666) pounds.

Learn more about Confidence Interval here:

https://brainly.com/question/34700241

#SPJ11

What is the area of a rectangle with the numbers as 6 and 14

Answers

Answer:

I believe its 84

Step-by-step explanation:

6 multiplied by 14

Does the function model exponential growth or decay?
$(t) = 5. (3/7)*

Answers

Answer:

decay

Step-by-step explanation:

Answer:

khan

Step-by-step explanation:

The National Collegiate Athletic Association​ (NCAA) measures the Graduation Success Rate​ (GSR), which is the percentage of eligible athletes who graduate within six years of entering college. According to the​ NCAA, the GSR for all scholarship athletes in a particular division is 57​%. The GSR for all students in this division is 62​%. Suppose the NCAA report was based on a sample of 500 ​student-athletes, of which 285 graduated within six years. Is this sufficient information to conclude that the GSR for all scholarship athletes in this division differs from 62​%? Carry out the test using a Type I error rate of 0.05.

Answers

Answer:

Yes. There is enough evidence to support the claim that the GSR for all scholarship athletes in this division differs from 62%.

Step-by-step explanation:

We have to perform a hypothesis test on a proportion.

The claim is that the GSR for all scholarship athletes in this division differs from 62%. Then, the null and alternative hypothesis are:

[tex]H_0: \pi=0.62\\\\H_a:\pi<0.62[/tex]

The significance level, named here as Type I error rate, is 0.05.

The sample size is n=500.

The sample proportion is:

[tex]p=X/n=285/500=0.57[/tex]

The standard deviation of the proportion is:

[tex]\sigma_p=\sqrt{\dfrac{\pi(1-\pi)}{n}}=\sqrt{\dfrac{0.62(1-0.62)}{500}}=\sqrt{0.0004712}=0.022[/tex]

The z-statistic is then:

[tex]z=\dfrac{p-\pi+0.5/n}{\sigma_p}=\dfrac{0.57-0.62+0.5/500}{0.022}=\dfrac{-0.049}{0.022} = -2.227[/tex]

The P-value for this left tailed test is:

[tex]P-value=P(z<-2.227)=0.013[/tex]

The P-value is smaller than the significance level, so the effect is significant. The null hypothesis is rejected.

There is enough evidence to support the claim that the GSR for all scholarship athletes in this division differs from 62%.

Answer:

[tex]z=\frac{0.57 -0.62}{\sqrt{\frac{0.62(1-0.62)}{500}}}=-2.303[/tex]  

[tex]p_v =2*P(z<-2.303)=0.0213[/tex]  

So the p value obtained was a very low value and using the significance level given [tex]\alpha=0.05[/tex] we have [tex]p_v<\alpha[/tex] so we can conclude that we have enough evidence to reject the null hypothesis, and we can said that at 5% of significance the proportion of student athletes who graduate within 6 years is significantly different from 0.62 or 62%

Step-by-step explanation:

Data given and notation

n=500 represent the random sample taken

X=285 represent the student athletes who graduate within 6 years

[tex]\hat p=\frac{285}{500}=0.57[/tex] estimated proportion of student athletes who graduate within 6 years

[tex]p_o=0.62[/tex] is the value that we want to test

[tex]\alpha=0.05[/tex] represent the significance level

Confidence=95% or 0.95

z would represent the statistic (variable of interest)

[tex]p_v[/tex] represent the p value (variable of interest)  

Concepts and formulas to use  

We need to conduct a hypothesis in order to test the claim that true proportion differs from 0.62.:  

Null hypothesis:[tex]p=0.62[/tex]  

Alternative hypothesis:[tex]p \neq 0.62[/tex]  

When we conduct a proportion test we need to use the z statistic, and the is given by:  

[tex]z=\frac{\hat p -p_o}{\sqrt{\frac{p_o (1-p_o)}{n}}}[/tex] (1)  

The One-Sample Proportion Test is used to assess whether a population proportion [tex]\hat p[/tex] is significantly different from a hypothesized value [tex]p_o[/tex].

Calculate the statistic  

Since we have all the info requires we can replace in formula (1) like this:  

[tex]z=\frac{0.57 -0.62}{\sqrt{\frac{0.62(1-0.62)}{500}}}=-2.303[/tex]  

Statistical decision  

It's important to refresh the p value method or p value approach . "This method is about determining "likely" or "unlikely" by determining the probability assuming the null hypothesis were true of observing a more extreme test statistic in the direction of the alternative hypothesis than the one observed". Or in other words is just a method to have an statistical decision to fail to reject or reject the null hypothesis.  

The significance level provided [tex]\alpha=0.05[/tex]. The next step would be calculate the p value for this test.  

Since is a bilateral test the p value would be:  

[tex]p_v =2*P(z<-2.303)=0.0213[/tex]  

So the p value obtained was a very low value and using the significance level given [tex]\alpha=0.05[/tex] we have [tex]p_v<\alpha[/tex] so we can conclude that we have enough evidence to reject the null hypothesis, and we can said that at 5% of significance the proportion of student athletes who graduate within 6 years is significantly different from 0.62 or 62%

​Which set of sample characteristics is most likely to produce a significant value for the independent-measures t statistic and a large effect size?

a. A small mean difference and small sample variances ​
b. A large mean difference and small sample variances ​
c. A small mean difference and large sample variances ​
d. A large mean difference and large sample variances

Answers

Answer:

Correct option: (b).

Step-by-step explanation:

Effect size (η) is a statistical measure that determines the strength of the association (numerically) between two variables.  For example, if we have data on the weight of male and female candidates and we realize that, on average, males are heavier than females, the difference between the weight of male and the weight of female candidates is known as the effect size.

The larger the effect size, the larger the weight difference between male and female will be.  

Statistic effect size helps us in analyzing if the difference is factual or if it is affected by a change of factors.  

In hypothesis testing, effect size, power, sample size, and critical significance level are related to each other.

The effect size formula for a hypothesis test of mean difference is:

[tex]\eta =\frac{\bar x_{1}-\bar x_{2}}{\sqrt{s^{2}}}[/tex]

The denominator s² is combined sample variance.

[tex]s^{2}=\frac{n_{1}s_{1}^{2}+n_{2}s_{2}^{2}}{n_{1}+n_{2}-2}[/tex]

The effect size is affected by two components:

Sample mean differenceSample variance.

As the sample mean difference is directly proportional to the effect size, on increasing the sample mean difference value the effect size will also increase.

Ans the sample variance is inversely proportional to the the effect size, on decreasing the sample variance value the effect size will increase and vice-versa.

Thus, the correct option is (b).

) The operator of a pumping station has observed that demand for water during early afternoon hours has an approximately exponential distribution with mean 100 cfs (cubic feet per second). a. Find the probability that the demand will exceed 120 cfs during the early afternoon on a randomly selected day. (Round your answer to four decimal places.) b. What water-pumping capacity, in cubic feet per second, should the station maintain during early afternoons so that the probability that demand will exceed capacity on a randomly selected day is only 0.09? (Round your answer to two decimal places.)

Answers

Answer:

a) 0.3012 = 30.12% probability that the demand will exceed 120 cfs during the early afternoon on a randomly selected day.

b) 240.79 cfs.

Step-by-step explanation:

Exponential distribution:

The exponential probability distribution, with mean m, is described by the following equation:

[tex]f(x) = \mu e^{-\mu x}[/tex]

In which [tex]\mu = \frac{1}{m}[/tex] is the decay parameter.

The probability that x is lower or equal to a is given by:

[tex]P(X \leq x) = \int\limits^a_0 {f(x)} \, dx[/tex]

Which has the following solution:

[tex]P(X \leq x) = 1 - e^{-\mu x}[/tex]

The probability of finding a value higher than x is:

[tex]P(X > x) = 1 - P(X \leq x) = 1 - (1 - e^{-\mu x}) = e^{-\mu x}[/tex]

In this problem, we have that:

[tex]m = 100, \mu = \frac{1}{100} = 0.01[/tex]

a. Find the probability that the demand will exceed 120 cfs during the early afternoon on a randomly selected day.

This is [tex]P(X > 120)[/tex]

[tex]P(X > 120) = e^{-0.01*120} = 0.3012[/tex]

0.3012 = 30.12% probability that the demand will exceed 120 cfs during the early afternoon on a randomly selected day.

b. What water-pumping capacity, in cubic feet per second, should the station maintain during early afternoons so that the probability that demand will exceed capacity on a randomly selected day is only 0.09?

We want x for which

[tex]P(X > x) = 0.09[/tex]

So

[tex]e^{-0.01x} = 0.09[/tex]

[tex]\ln{e^{-0.01x}} = \ln{0.09}[/tex]

[tex]-0.01x = \ln{0.09}[/tex]

[tex]0.01x = -\ln{0.09}[/tex]

[tex]x = -\frac{\ln{0.09}}{0.01}[/tex]

[tex]x = 240.79[/tex]

So 240.79 cfs.

Final answer:

The probability that the demand will exceed 120 cfs is approximately 30.12%. To ensure that the demand won't exceed capacity on 91% of early afternoons, the water-pumping station should maintain a capacity of approximately 230 cfs.

Explanation:a. Finding the Probability That Demand Will Exceed 120 cfs

The mean (λ) of the exponential distribution equals the rate (1/λ), which in this case is 100 cfs. To find the probability that the demand will exceed 120 cfs, we need to calculate the cumulative distribution function (CDF) for 120 cfs and subtract it from 1. The formula for the CDF is F(x) = 1 - e^(-λx). Replacing x with 120 and λ with 1/100, we get: F(120) = 1 - e^(-120/100) = 1 - e^-1.2. The value of e^-1.2 is approximately 0.3012. Thus, F(120) = 1 - 0.3012 = 0.6988. Therefore, the probability that the demand will exceed 120 cfs is 0.3012 or 30.12%, rounded to four decimal places.

b. Finding the Water-Pumping Capacity Needed to Limit the Probability of Exceeding Demand to 0.09

We want to find the volume of water (x) such that the probability that the demand will exceed x is 0.09. To do this, we set F(x) = 1 - 0.09 (or 0.91), and use the CDF formula: F(x) = 1 - e^(-λx). Solving the equation 0.91 = 1 - e^(-x/100) for x yields x = -100ln(1 - 0.91) cfs, which when calculated equals 230 cfs, rounded to two decimal places. Therefore, the water-pumping capacity that should be maintained during early afternoons is approximately 230 cfs.

Learn more about Exponential Distribution here:

https://brainly.com/question/33722848

#SPJ11

PLEASE HURRY!!! Dwight has 3 baseball cards, and Ellis has 9 baseball cards. If Dwight and Ellis put their baseball cards together and then divide them up equally, how many will each one of them have?

3
6
9
12

Answers

Answer:

6

Step-by-step explanation:

3+9=12,

So since there are 2 people,

12 divided by 2 is 6.

Your answer would be 6.

9+3=12

12÷2=6

Dwight and Ellis both have 6 cards equally.

Hope this helps!!!

Bob is the owner of a home improvement store. He has hired you to check his machine’s calibration prior to starting production on a large order. To check this, you set the machine to create 1.5 inch bolts and manufacture a random sample of 200 bolts. That sample of bolts has an average length of 1.521 inches with a standard deviation of 0.204 inches. Does this sample provide convincing evidence that the machine is working properly or should it be shut down for repairs?

Answers

Parameter:

Null hypothesis:  μ = 1.5 (the machines work as needed)

Alternative hypothesis: μ ≠ 1.5 (The machines don't work properly)

Since we don't know the population deviation, we will apply a t-test to compare the actual mean to the reference value

Conditions:

Simple random sample: The problem states the sample was chosen at random.

Independence: You can assume there are more than 10(200) = 2000 screws.

Normality: (200 ≥ 30)  the sample is large enough for sampling distribution to assume Normality

Calculations:

Since the conditions are met we will carry out a T-test using a calculator for μ≠μ0

μ = population mean = 1.5

σ= standard dev = 0.204

xbar = sampe mean = 1.521

n = sample size= 200

After adding all of this data into the calculator in the T-test program we get a p-value of 0.147

Conclusion:

We will assume a 0.05 sig level for our conclusion.

Since 0.147 > 0.05 we will fail to reject the null hypothesis meaning that we have enough evidence to show that the machines work as needed.

Final answer:

Given the average length and standard deviation of the manufactured bolts, the machine might require recalibration since the lengths produced are slightly larger than desired, and there's a wide spread in lengths. Application of the empirical rule can provide further insight about the need for machine repair. A larger sample size might give a more accurate assessment.

Explanation:

Given that the machine is set to manufacture bolts of 1.5 inches and a random sample of 200 bolts showed an average length of 1.521 inches with a standard deviation of 0.204 inches, it seems the machine may not be calibrated correctly. The average length is slightly larger than the desired length, a factor that may be important depending on the tolerances required for these bolts. The standard deviation is also relatively high, implying that there is a wide spread in the lengths of bolts being produced.

One way to determine if the machine needs to be repaired or not is to apply the empirical rule, also known as the 68-95-99.7 rule, which says approximately 68% of data falls within one standard deviation from the mean, 95% falls within two standard deviations, and 99.7% falls within three standard deviations in a normal distribution. In this case, it means 95% of the bolts should fall between 1.113 inches (1.521 - 2*0.204) and 1.929 inches (1.521 + 2*0.204). If these lengths are acceptable for the operation, the machine can continue working. If not, it might need to be shut down for repair.

Also, it's also worth noting that a larger sample size could provide a more accurate assessment of whether the machine is working correctly or not. While a sample size of 200 is decent, a larger sample size would reduce the margin of error from sample to population.

Learn more about Statistical Analysis here:

https://brainly.com/question/33812621

#SPJ3

A citrus grower anticipates a profit of $100,000 this year if the nightly temperatures remain mild. Unfortunately, the weather forecast indicates a 10% chance that the temperature will drop below freezing during the next week. Such freezing weather will destroy 40% of the crop and reduce the profit to $60,000. However, the grower can protect the citrus fruit against the possible freezing at a cost of $5000. Should the grower spend the $5000 and thereby reduce the profit to $95,000? Hint: Compute E(X), where X is the profit the grower will get if he does nothing to protect the fruit.

Answers

Answer:

No, the citrus grower shouldn't spend the $5000 and thereby reduce the profit to $95,000 as the expected profit from doing nothing to protect the citrus plants ($96,000) is more than the profit that'll be available if $5,000 is spent on protection.

Step-by-step explanation:

First of, we compute the probability distribution of X.

X represents the profit if the citrus grower does nothing to protect the citrus fruits.

If the citrus grower does nothing, there are two possibilities as to what will happen.

1) The temperatures can drop below freezing point at a chance of 10% and the profit plummets to $60,000

2) The temperature can remain mild at a chance of 90% (100%-10%) and the profit stays at $100,000.

The probability distribution will then be

X ||||||||||||||| P(X)

60,000 ||| 0.10

100,000 | 0.90

The expected value of any probability distribution is given as

E(X) = Σ xᵢpᵢ

xᵢ = each variable

pᵢ = probability of each variable

E(X) = (60,000×0.10) + (100,000×0.90)

= 6,000 + 90,000 = $96,000

The expected amount of profits from doing nothing to protect the citrus fruits = $96,000

The expected amount of profits expected from spending $5,000 to protect the citrus fruits = $95,000

$96,000 > $95,000

Hence, the citrus grower is better off doing nothing to protect the citrus fruits.

Hope this Helps!!!

Find the 107th term of the sequence -9, -5, -1, 3, 7

Answers

Answer:

4×107 = 428

428-(5×4) =

428-20= 408

Your answer would be 415.

To find this we need to find the expression for the nth term of the sequence so we can substitute 107 in.

First you notice that each term is going up by 4 each time, which means that 4 is our n coefficient.

Then if we write the multiples of 4 above the sequence:

4, 8, 12, 16
-9, -5, -1, 3
We can see that the difference between each multiple of 4 and each term of the sequence is -13, because -9 - 4 = -13, -5 - 8 = -13, etc.

This means that your final expression is 4n - 13, and now you can substitute 107 in as n:
4(107) - 13 = 428 - 13 = 415

I hope this helps!

2.06. In a study to estimate the proportion of residents in a certain city and its suburbs who favor the construction of a nuclear power plant, it is found that 74 of 100 urban residents favor the construction while only 70 of 125 suburban residents are in favor. Is there a significant difference between the proportions of urban and suburban residents who favor the construction of the nuclear plant at 5% significance level

Answers

Answer:

[tex]z=\frac{0.74-0.56}{\sqrt{0.64(1-0.64)(\frac{1}{100}+\frac{1}{125})}}=2.795[/tex]  

[tex]p_v =2*P(Z>2.795)= 0.005[/tex]  

So if we compare the p value and using any significance level for example [tex]\alpha=0.05[/tex] we see that [tex]p_v<\alpha[/tex] so we can conclude that we have enough evidence to reject the null hypothesis, and we can conclude that the proportions are different at 5% of significance.  

Step-by-step explanation:

Data given and notation  

[tex]X_{1}=74[/tex] represent the number of residents in a certain city and its suburbs who favor the construction of a nuclear power plant

[tex]X_{2}=70[/tex] represent the number of people suburban residents are in favor

[tex]n_{1}=100[/tex] sample 1 selected

[tex]n_{2}=125[/tex] sample 2 selected

[tex]p_{1}=\frac{74}{100}=0.74[/tex] represent the proportion of residents in a certain city and its suburbs who favor the construction of a nuclear power plant

[tex]p_{2}=\frac{70}{125}=0.56[/tex] represent the proportion of suburban residents are in favor

z would represent the statistic (variable of interest)  

[tex]p_v[/tex] represent the value for the test (variable of interest)

Concepts and formulas to use  

We need to conduct a hypothesis in order to check if the proportions are different, the system of hypothesis would be:  

Null hypothesis:[tex]p_{1} = p_{2}[/tex]  

Alternative hypothesis:[tex]p_{1} \neq p_{2}[/tex]  

We need to apply a z test to compare proportions, and the statistic is given by:  

[tex]z=\frac{p_{1}-p_{2}}{\sqrt{\hat p (1-\hat p)(\frac{1}{n_{1}}+\frac{1}{n_{2}})}}[/tex]   (1)

Where [tex]\hat p=\frac{X_{1}+X_{2}}{n_{1}+n_{2}}=\frac{74+70}{100+125}=0.64[/tex]

Calculate the statistic

Replacing in formula (1) the values obtained we got this:  

[tex]z=\frac{0.74-0.56}{\sqrt{0.64(1-0.64)(\frac{1}{100}+\frac{1}{125})}}=2.795[/tex]  

Statistical decision

The significance level provided is [tex]\alpha=0.05[/tex] ,and we can calculate the p value for this test.  

Since is a two tailed test the p value would be:  

[tex]p_v =2*P(Z>2.795)= 0.005[/tex]  

So if we compare the p value and using any significance level for example [tex]\alpha=0.05[/tex] we see that [tex]p_v<\alpha[/tex] so we can conclude that we have enough evidence to reject the null hypothesis, and we can conclude that the proportions are different at 5% of significance.  

A study found that 1% of Social Security recipients are too young to vote. If 800 social security recipients are randomly selected find the Mean, Variance and the Standard deviation of social security recipients who are too young to vote. Present your answer in two decimal places and in order: mean, Variance, Standard deviation.

Answers

Answer:

8, 7.92, 2.81

Step-by-step explanation:

For each Social Security recipient, there are only two possible outcomes. Either they are too young to vote, or they are not. The probability of a Social Security recipient is independent of any other Social Security recipient. So we use the binomial probability distribution to solve this question.

Binomial probability distribution

Probability of exactly x sucesses on n repeated trials, with p probability.

The expected value of the binomial distribution is:

[tex]E(X) = np[/tex]

The variance of the binomial distribution is:

[tex]V(X) = np(1-p)[/tex]

The standard deviation of the binomial distribution is:

[tex]\sqrt{V(X)} = \sqrt{np(1-p)}[/tex]

In this problem, we have that:

[tex]n = 800, p = 0.01[/tex]

So

Mean:

[tex]E(X) = np = 800*0.01 = 8[/tex]

The variance of the binomial distribution is:

[tex]V(X) = np(1-p) = 800*0.01*0.99 = 7.92[/tex]

The standard deviation of the binomial distribution is:

[tex]\sqrt{V(X)} = \sqrt{np(1-p)} = \sqrt{800*0.01*0.99} = 2.81[/tex]

Formatted answer: 8, 7.92, 2.81

4. The diagonal of a rectangle is 13cm. The breadth is 5cm. Find it's length. *​

Answers

Answer:

The length of the rectangle is

12

c

m

and the area of the rectangle is

60

c

m

2

.

Explanation:

By definition, the angles of a rectangle are right. Therefore, drawing a diagonal creates two congruent right triangles. The diagonal of the rectangle is the hypotenuse of the right triangle. The sides of the rectangle are the legs of the right triangle. We can use the Pythagorean Theorem to find the unknown side of the right triangle, which is also the unknown length of the rectangle.

Recall that the Pythagorean Theorem states that the sun of the squares of the legs of a right triangle is equal to the square of the hypotenuse.

a

2

+

b

2

=

c

2

5

2

+

b

2

=

13

2

25

+

b

2

=

169

25

25

+

b

2

=

169

25

b

2

=

144

b

2

=

144

b

=

±

12

Since the length of the side is a measured distance, the negative root is not a reasonable result. So the length of the rectangle is

12

cm.

The area of a rectangle is given by multiplying the width by the length.

A

=

(

5

c

m

)

(

12

c

m

)

A

=

60

c

m

2

Answer:

[tex] {5}^{2} + {x}^{2} = {13}^{2} \\ 25 + {x}^{2} = 169 \\ {x}^{2} = 169 - 25 \\ {x}^{2} = 144 \\ x = \sqrt{144} \\ x = 12cm[/tex]

Step-by-step explanation:

use the Pythagorean theorem

hope this helps you

Assume that 0 < x < pi/2 and 0 < y < pi/2. Find the exact value of cos(x-y) if cos(x)=3/5 and cos(y)=4/5
a. 25/24
b. -25/24
c. 24/25
d. -24/25

Answers

Answer: The answer is C

I ready probability concepts quiz

Answers

Attack the problem first

A hang glider is soaring over a 100-acre area that consists of thick forest and open fields. In the diagram below, the forested area is shaded in green and the open field is the white space. Upon landing, the hang glider realizes she has dropped her keys.

Answers

Answer:

the answer will be 0.8

Step-by-step explanation:

hard to explain

Answer:

C. 0.8

Step-by-step explanation:

The graph below show Layla’s Pay as a hairdresser. How much does Layla charge per haircut?
A. $5
B. $20
C. $1
D. $10

Answers

Answer:

i assume 20 dollars per haircut

Step-by-step explanation:

i do not know what the bottom numbers stand for because there is no label

Answer:

The Answer is B. $20 per haircut.

Step-by-step explanation:

Question 1 Show all your work. Indicate clearly the methods you use, because you will be scored on the correctness of your methods as well as on the accuracy and completeness of your results and explanations. A recent survey collected information on television viewing habits from a random sample of 1,000 people in the United States. Of those sampled, 37 percent indicated that their favorite sport to watch on television was American football.
(a) Construct and interpret a 95 percent confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football.
(b) Based on your answer to part (a), is it reasonable to believe that 33 percent is the actual percent of people in the United States whose favorite sport to watch on television is American football? Justify your answer.

Answers

Answer:

(a) The 95% confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football is (0.34, 0.40).

(b) Not reasonable.

Step-by-step explanation:

The information provided is:

n = 1000

[tex]\hat p[/tex] = 0.37

(a)

The (1 - α)% confidence interval for the population proportion p is:

[tex]CI=\hat p\pm z_{\alpha/2}\sqrt{\frac{\hat p(1-\hat p)}{n}}[/tex]

Here,

[tex]\hat p[/tex] = sample proportion

n = sample size

[tex]z_{\alpha/2}[/tex] = critical value of z.

Compute the critical value of z for 95% confidence interval as follows:

[tex]z_{\alpha/2}=z_{0.05/2}=z_{0.025}=1.96[/tex]

*Use a z-table for the value.

Compute the 95% confidence interval for the population proportion p as follows:

[tex]CI=\hat p\pm z_{\alpha/2}\sqrt{\frac{\hat p(1-\hat p)}{n}}[/tex]

     [tex]=0.37\pm 1.96\times\sqrt{\frac{0.37(1-0.37)}{1000}}[/tex]

     [tex]=0.37\pm 0.03\\=(0.34, 0.40)[/tex]

Thus, the 95% confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football is (0.34, 0.40).

(b)

Now we need to determine whether it is reasonable to believe that the actual percent of people in the United States whose favorite sport to watch on television is American football is 33%.

The hypothesis can be defined as:

H₀: The percentage of people in the United States whose favorite sport to watch on television is American football is 33%, i.e. p = 0.33.

Hₐ: The percentage of people in the United States whose favorite sport to watch on television is American football is different from 33%, i.e. p ≠ 0.33

The hypothesis can be tested based on a confidence interval.

The decision rule:

If the (1 - α)% confidence interval includes the null value of the test then the null hypothesis will not be rejected. And if the (1 - α)% confidence interval includes the null value of the test then the null hypothesis will be rejected.

The 95 confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football is (0.34, 0.40).

The confidence interval does includes the null value of p, i.e. 0.33.

So, the null hypothesis will be rejected.

Hence, concluding that is is not reasonable to believe that 33% is the actual percent of people in the United States whose favorite sport to watch on television is American football.

95% confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football is (0.34, 0.40).

Concluding that is is not reasonable to believe that 33% is the actual percent of people in the United States whose favorite sport to watch on television is American football

Given that,

A recent survey collected information on television viewing habits from a random sample of 1,000 people in the United States.

Of those sampled, 37 percent indicated that their favorite sport to watch on television was American football.

We have to determine,

Construct and interpret a 95 percent confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football.

According to the question,

Sample proportion p = 37% = 0.37

Sample space n = 1000

The (1 - α)% confidence interval for the population proportion,

[tex]C.I. = P \pm Z_\frac{\alpha}{2} \sqrt{\dfrac{p(1-p)}{n} }[/tex]

To compute the critical value of z for 95% confidence interval as follows:

[tex]z_\frac{ \alpha}{2} = z_\frac{0.05}{2} = 1.96[/tex]

By using a z-table for the value.

Compute the 95% confidence interval for the population proportion p as follows:

[tex]C.I. = p\pm Z_\frac{\alpha}{2} \sqrt{\dfrac{p(1-p)}{n} }\\\\C.I. = 0.37\pm 1.96 \sqrt{\dfrac{0.43(1-0.34)}{1000} }\\\\C.I.= 0.03 \pm 0.09\\\\C.I. = (0.34, \ 0.40)[/tex]

Hence,  95% confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football is (0.34, 0.40).

The hypothesis can be defined as:

H₀: The percentage of people in the United States whose favorite sport to watch on television is American football is 33%, i.e. p = 0.33.

Hₐ: The percentage of people in the United States whose favorite sport to watch on television is American football is different from 33%, i.e. p ≠ 0.33

The hypothesis can be tested based on a confidence interval.

The (1 - α)% confidence interval includes the null value of the test then the null hypothesis will not be rejected.

And if the (1 - α)% confidence interval includes the null value of the test then the null hypothesis will be rejected.

The 95 confidence interval for the proportion of all people in the United States who would indicate that their favorite sport to watch on television is American football is (0.34, 0.40).

The confidence interval does includes the null value of p, i.e. 0.33.

So, the null hypothesis will be rejected.

Hence, Concluding that is is not reasonable to believe that 33% is the actual percent of people in the United States whose favorite sport to watch on television is American football

To know more about Probability click the link given below.

https://brainly.com/question/15694157

Find the perimeter of the figure to the nearest hundredth.


Please consider helping!

Any help is appreciated!

Answers

Hello!

Your answer should be 26.85.

We can use the formula of pi d or 2 pi r for the circumference.

You would get 5 pi.

But since its not a full circle you would divide it in half and get 2.5 pi.

2.5 pi is equal to 7.85.

Now we can use the equation 7.85 + 7 + 7 + 5

That would equal our answer... 26.85!

Hope this helps!

Solve the equation
1
4
(4x − 24) + x = 14.

Distribute the
1
4
to the quantity to get:


Combine the like terms to get:


Add 6 to both sides to get:


x =

Answers

Answer:

Distribute the  

1

4

 to the quantity to get:

✔ x – 6 + x = 14

Combine the like terms to get:

✔ 2x – 6 = 14

Add 6 to both sides to get:

✔ 2x = 20

x =

✔ 10

Step-by-step explanation:

i got is right so i hope it helps :)

The required solution is [tex]x=10[/tex].

Important equation:

The given equation is [tex]\dfrac{1}{4}(4x-24)+x=14[/tex].

We need to find the value of [tex]x[/tex].

Linear equation:

The given linear equation can be written as:

[tex]\dfrac{1}{4}(4x)-\dfrac{1}{4}(24)+x=14[/tex]

[tex]x-6+x=14[/tex]

[tex]2x=14+6[/tex]

[tex]2x=20[/tex]

Divide both sides by 2.

[tex]x=\dfrac{20}{2}[/tex]

[tex]x=10[/tex]

Thus, the required solution is [tex]x=10[/tex].

Find more about 'Linear equation' here:

https://brainly.com/question/13097570

Total
Last July, 160 babies were born in a hospital in Maine;
Š of the babies were girls. Seventy babies weighed 8
pounds or more. Fifty boys weighed 8 pounds or more.
b
REFERATER
O a = 64, b = 14, c = 76, d = 20, e = 90
o a = 14, b = 64, c = 90 d = 20, e = 76
14, b = 76, c = 64, d = 90, e = 20
a = 14, b = 64, c = 76, d = 20, e = 90
11

Answers

Answer:

D

Step-by-step explanation:

If you work backwards and add everything up it works.

Answer:

D

Step-by-step explanation:

Which functions have a maximum and are transformed to the left and down of the parent function, f(x) = x2? Check all that apply. p(x) = 14(x + 7)2 + 1
q(x) = –5(x + 10)2 – 1
s(x) = –(x – 1)2 + 0.5
g(x) = 2x2 + 10x – 35
t(x) = –2x2 – 4x – 3

Answers

Answer:q(x)=-5(x+10)2-1

t(x)=-2x2-4x-3

Step-by-step explanation:

The functions that have a maximum and are transformed to the left and down of the parent function, f(x) = x2 include:

q(x) = –5(x + 10)2 – 1t(x) = –2x2 – 4x – 3

What is a function?

It should be noted that a function simply means a rule the shows the relationship between the variables. The variables are the dependent and the independent variables.

In order to determine whether the function will have a minimum or a maximum depending on the coefficient of the x² term. When the x² coefficient is positive, the function has a minimum and when it is negative, the function has a maximum.

In this case, the above functions have a maximum and are transformed to the left and down of the parent function, f(x) = x2.

Learn more about functions on:

https://brainly.com/question/2833285

#SPJ2

how many 1/4 kilograms are there in 15 1/2 kg

Answers

Answer:

20

Step-by-step explanation:

as u have to divide the answr and convert it

Answer:

62 is the answer because

15x4=60 + 1/2x4 = 62

work out 5 power 8 x 5 to power -2 divide by 5 to power 4

Answers

Answer: 25

Step-by-step explanation:

Other Questions
A 1.005 m chain consists of small spherical beads, each with a mass of 1.00 g and a diameter of 5.00 mm, threaded on an elastic strand with negligible mass such that adjacent beads are separated by a center-to-center distance of 10.0 mm. There are beads at each end of the chain. The strand has a spring constant of 28.8 N/m. The chain is stretched horizontally on a frictionless tabletop to a length of 1.50 m, and the beads at both ends are fixed in place.1. What is the linear mass density of the chain? What is the tension in the chain?2. With what speed would a pulse travel down the chain?3. The chain is set vibrating and exhibits a standing-wave pattern with four antinodes. What is the frequency of this motion?4. If the beads are numbered sequentially from 1 to 101, what are the numbers of the five beads that remain motionless?5. The 13th bead has a maximum speed of 7.54 m/s. What is the amplitude of that bead's motion?6. If x0=0 corresponds to the center of the 1st bead and x101=1.50m corresponds to the center of the 101st bead, what is the position xn of the nth bead? Calculate the first four coordinates.7. What is the maximum speed of the 30th bead? Ron is conducting an experiment that lasts several hours. During part of the experiment, a noisy power saw operates outside the room. Ron is concerned that responses may be influenced by the power saw instead of his independent variable. This example illustrates the potential problem ofa. instrumentationb. testingc. historyd. selection The magnetic flux through each turn of a 110-turn coil is given by B = 9.75 103 sin(t), where is the angular speed of the coil and B is in webers. At one instant, the coil is observed to be rotating at a rate of 8.70 102 rev/min. (Assume that t is in seconds.) (a) What is the induced emf in the coil as a function of time for this angular speed? (Use the following as necessary: t. Do not use other variables, substitute numeric values. Assume that e m f is in volts. Do not include units Oogenesis occurs in the -----Spermatogenesis occurs in the ------? which function represents a parabola? If the volume of a balsa wood dragster body increases, the mass _____. 2. What was the goal of the Bonus Army?A) To receive bonuses for disabled veteransB) To get early payment on a promised World War I bonusC)To ask for bonuses for active military D) To demand bonuses for veterans who lost their jobs 1. Kim has been taking a lot of sick time. Which of the following is recommended toreduce the amount of sick time she takes?A. Wearing proper protective clothingB. Knowing how to properly handle hazardous materialsC. Exercising and eating healthy to get in shapeD. Random drug testing The major nonelastic source of resistance to air flow in the respiratory passageways is ________. How does the setting affect the theme in Free Willy java The maximum-valued element of an integer-valued array can be recursively calculated as follows: If the array has a single element, that is its maximum (note that a zero-sized array has no maximum) Otherwise, compare the first element with the maximum of the rest of the array-- whichever is larger is the maximum value. Write an int method named max that accepts an integer array, and the number of elements in the array and returns the largest value in the array. Assume the array has at least one element. Help me plz or I will fail WHY is Democracy called Government by discussion What does Hola soy Dora mean ? A potato chip company produces a large number of potato chip bags each day and wants to investigate whether a new packaging machine will lower the proportion of bags that are damaged. The company selected a random sample of 150 bags from the old machine and found that 15 percent of the bags were damaged, then selected a random sample of 200 bags from the new machine and found that 8 percent were damaged. Let pO represent the sample proportion of bags packaged on the old machine that are damaged, pN represent the sample proportion of bags packaged on the new machine that are damaged, pC represent the combined proportion of damaged bags from both machines, and nO and nN represent the respective sample sizes for the old machine and new machine. Have the conditions for statistical inference for testing a difference in population proportions been met?A No, the condition for independence has not been met, because random samples were not selected.B No, the condition for independence has not been met, because the sample sizes are too large when compared to the corresponding population sizes.C No, the condition that the distribution of pOpN is approximately normal has not been met, because nN(pC) is not greater than or equal to 10.D No, the condition that the distribution of pOpN is approximately normal has not been met, because nO(1pC) is not greater than or equal to 10.E All conditions for making statistical inference have been met. the blank are the main parts of the respiratory system Grace is serving on a jury for the first time. She entered the jury room with a dollar amount in mind for damages but, following deliberations, she finds that the vast majority of the jury members are committed to the idea of a much higher dollar amount. Grace agreed to a significantly higher number. This is an example of ____. Mrs. Hanson bought 1.6 pounds of grapes. The grapes cost $2.50 per pound. How much didshe pay for the grapes? Which shows three human body parts in order from the simplest level of organization to the most complex? Consider the relationship between monopoly pricing and price elasticity of demand. If demand is inelastic and a monopolist raises its price, total revenue would and total cost would , causing profit to . Therefore, a monopolist will produce a quantity at which the demand curve is inelastic. Use the purple segment (diamond symbols) to indicate the portion of the demand curve that is inelastic. (Hint: The answer is related to the marginal-revenue (MR) curve.) Then use the black point (plus symbol) to show the quantity and price that maximizes total revenue (TR). Inelastic Demand Max TR 0 1 2 3 4 5 6 7 8 9 10 10 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 Price Quantity Demand Marginal Revenue