Answer:
We conclude that ball 2 has a larger mass.
Explanation:
This is because the internal forces at collision are an action reaction pair. The force on ball 1 due to ball 2 equals the force on ball 2 due to ball 1. Since these forces are equal in magnitude, let's denote it by F. So
For each ball, F = ma and a = F/m. Since F is the same for both balls, if follows that the acceleration of each ball is inversely proportional to its mass. That is, a ∝ 1/m.
Since ball 1 has a higher acceleration, it has a lower mass. Also ball 2 has a small acceleration, so it has a higher mass.
Answer:
See explanation
Explanation:
Solution:-
- Denote the following:
mass of ball 1 = m1
initial velocity of ball 1 = vi,1
Final velocity of ball 1 = vf,1
mass of ball 2 = m2
initial velocity of ball 2 = vi,2
Final velocity of ball 2 = vf,2
- Since there are no external forces acting on the system containing the two balls then we can say that the linear momentum of the system is conserved.
- The conservation of linear momentum says that the momentum before or after the collision remains conserved:
Pi = Pf
Where, p = m*v
- The conservation of momentum for the given system:
m1*vi,1 + m2*vi,2 = m1*vi,1 + m2*vi,2
- Since no information is given about the initial conditions. We will consider the internal force (F) that acts when two balls come in contact. Then apply Newton's second law of motion on both balls individually:
F = m*a
Where, m: Mass of object
a: Acceleration of the object
- For ball 1:
F1 = m1*a1
- For ball 2:
F2 = m2*a2
Given that a1 > a2, and the the internal force that acts on both balls during collision obeys Newton's 3rd Law i.e for every action there is an equal but opposite reaction: So , F1 = F2
F = m1*a1
F = m2*a2
m1*a1 = m2*a2
- Since, a1 > a2 for above equation to hold true then m1 < m2. That is the mass of ball 1 is quite less compared to ball 2.
When water is boiled at a pressure of 2.00 atm, the heat of vaporization is 2.20×106J/kg2.20×10
6
J/kg and the boiling point is 120∘C120
∘
C. At this pressure, 1.00 kg of water has a volume of 1.00×10−3m31.00×10
−3
m
3
, and 1.00 kg of steam has a volume of 0.824m30.824m
3
. (a) Compute the work done when 1.00 kg of steam is formed at this temperature. (b) Compute the increase in internal energy of the water.
Answer:
Explanation:
a ) When 1 kg water is boiled at constant pressure of 1 atm , its volume increases by following volume
(.824 - .001 )m³
.823 m³
work done by steam = increase in volume x pressure
.823 x 10⁵ J
Heat added
= latent heat of vaporization x mass
= 2260000 J x 1
= 22.6 x 10⁵ J
Increase in internal energy of gas
= heat added - work done by gas
= (22.6 - .823) x 10⁵ J
= 21.777 x 10⁵ J .
Flasher units are being discussed. Technician A says that only a DOT-approved flasher unit should be used for turn signals. Technician B says that a parallel (variable-load) flasher will function for turn signal usage, although it will not warn the driver if a bulb burns out. Who is right?
a. Technician A onlyb. Technician B onlyc. Both Technicians A and Bd. Neither Technician A nor B
Answer: C
Both Technicians A and B
Explanation:
Only a DOT-approved flasher unit should be used for turn signals. And a parallel (variable-load) flasher will function for turn signal usage, although it will not warn the driver if a bulb burns out.
describe the relationship that exists between amplitude of a wave and the amount of energy that the wave carries
The amount of energy a wave is carrying is related to the wave's amplitude. The more displacement the first coil is given, the greater the amplitude it will have.
Explanation:
The greater the disturbance is the correlation that endures between the amplitude of a disruption in the water and amount of wave. The amount of energy a wave is carrying is related to the wave's amplitude. If the wave disturbance increases, the wave's amplitude increases, if the wave's disturbance decreases, the wave's amplitude diminishes. Therefore, at-last the amplitude of every transverse pulse is similar to the energy that is transmitted by that pulse through the medium.An object becomes charged when the atoms in the object gain or lose. True or False
Answer:
True.
Explanation:
When an object's atoms gain or lose electrons, it becomes an ion, becoming charged.
A ray of light, traveling through air, is incident on a smooth transparent liquid surface at an angle of 13 degrees with respect to the normal of the surface. What is the refraction angle of the light in the liquid if the index of refraction of the liquid is 1.54? Return the angle in degrees and rounded to 2 decimal places.
Answer:
The refraction angle of the light in the liquid is 8.40 degrees.
Explanation:
Given:
A ray of light passing through air to liquid.
Air is medium 1 and liquid is medium 2.
Angle of incidence [tex](\theta_1)[/tex] = 13°
Refractive index, [tex](n_2)[/tex] = 1.54
We have to find the angle of refraction:
Let the angle of refraction be "[tex]\theta_2[/tex]" .
Formula to be used:
⇒ [tex]n_1\times sin(\theta_1) =n_2\times sin(\theta_2)[/tex]
Note:
Index of refraction of air [tex](n_1)[/tex] = 1
Accordingly:
Using Snell's law and plugging the values.
⇒ [tex]n_1\times sin(\theta_1) =n_2\times sin(\theta_2)[/tex]
⇒ [tex]1\times sin(13) =1.54\times sin(\theta_2)[/tex]
⇒ [tex]\frac{1\times sin(13)}{1.54} = sin(\theta_2)[/tex]
⇒ [tex]\frac{1\times 0.2249}{1.54} = sin(\theta_2)[/tex] ...sin(13) =0.2249
⇒ [tex]\theta_2=sin^-^1(\frac{0.2249}{1.54})[/tex]
⇒ [tex]\theta_2=sin^-^1(0.145)[/tex]
⇒ [tex]\theta_2=8.3974[/tex] degrees.
⇒ [tex]\theta_2 = 8.40[/tex] degrees ...Rounded to 2 decimal place.
The refraction angle of the light in the liquid is 8.40 degrees.
There is a Limited amount of energy available on earth. Why is it important that people conserve energy?
Answer:
If humans conserve energy then we will have energy for alonger amount of time.
Explanation:
A 10.5- resistor, a 15.9-μF capacitor, and a 15.2-mH inductor are connected in series with a 203-V generator. (a) At what frequency is the current a maximum? (b) What is the maximum value of the rms current? Note: The ac current and voltage are rms values and power is an average value unless indicated otherwise.
(a) The resonant frequency where current is maximum is: f_res = 1 / (2π√(LC)) ≈ 323.74 Hz.
(b) The maximum rms current is: I_max = V / √(R^2 + (1 / (2πf_resC))^2 + (2πf_resL)^2) ≈ 4.51 A.
Here's a step-by-step solution for both parts of the problem:
(a) Finding the resonant frequency:
Identify the formula: The resonant frequency (f_res) of a series RLC circuit is given by:
f_res = 1 / (2π√(LC))
Plug in values: Substitute the given values of inductance (L = 15.2 mH = 0.0152 H) and capacitance (C = 15.9 μF = 15.9 × 10^-6 F) into the formula:
f_res = 1 / (2π√(0.0152 H × 15.9 × 10^-6 F))
Calculate: Use a calculator to evaluate the expression:
f_res ≈ 323.74 Hz
Therefore, the current is maximum at a frequency of approximately 323.74 Hz.
(b) Finding the maximum rms current:
Identify the formula: The rms current (I) in a series RLC circuit is given by:
I = V / √(R^2 + (X_L - X_C)^2)
where:
V is the generator voltage (203 V)
R is the resistance (10.5 Ω)
X_L is the inductive reactance (2πfL)
X_C is the capacitive reactance (1 / (2πfC))
Calculate reactances at resonant frequency:
X_L = 2πf_resL ≈ 30.15 Ω
X_C = 1 / (2πf_resC) ≈ 30.15 Ω (at resonance, X_L and X_C are equal)
Plug in values: Substitute the values into the formula:
I = 203 V / √(10.5 Ω^2 + (30.15 Ω - 30.15 Ω)^2)
Simplify and calculate:
I ≈ 203 V / 10.5 Ω ≈ 4.51 A
Therefore, the maximum rms current in the circuit is approximately 4.51 A.
The frequency at which the current is maximum in the given RLC circuit is approximately 326 Hz, and the maximum value of the RMS current is about 19.3 A.
To solve the question, we need to work with the concepts of an RLC circuit driven by an AC source.
Let's break down the steps:
The frequency at which the current is a maximum in an RLC circuit is the resonant frequency. This can be calculated using the formula:
[tex]F(resonant) = \( \frac{1}{2 \pi \sqrt{LC}} \)[/tex] \)Given:
Inductance, L = 15.2 mH = 15.2 × 10⁻³ HCapacitance, C = 15.9 μF = 15.9 × 10⁻⁶ FPlugging in these values:
[tex]F(resonant) = \( \frac{1}{2 \pi \sqrt{(15.2 \times 10^{-3})(15.9 \times 10^{-6})}} \)[/tex])}} \)[tex]F(resonant) = 326 Hz[/tex]At resonance, the impedance Z is equal to the resistance R. The maximum RMS current can be calculated using Ohm's Law:
[tex]I(max) = \( \frac{V(rms)}{R} \)[/tex]
Given:
Resistance, R = 10.5 ΩVoltage, V(rms) = 203 VPlugging in these values:
[tex]I(max) = \( \frac{203}{10.5} \)\\I(max) = 19.3 A[/tex]Therefore, the frequency at which the current is maximum is approximately 326 Hz, and the maximum value of the RMS current is approximately 19.3 A.
When the person ran that blue light over the beads they_________,
The blue light bar that the person was using must therefore be emitting_____________.
A. Changed Colors; UV light
B. Exploded; Heat
C. Stayed White; Energy
Answer:
A Changed colors: UV light
Explanation:
Was a uv light, reacted just like the sun did.
Answer:
A changed colors
Explanation:
please mark me as brainliest
What are the methods that are used for heat transfer
Answer:
Heat can travel from one place to another in three ways: Conduction, Convection and Radiation. Both conduction and convection require matter to transfer heat. If there is a temperature difference between two systems heat will always find a way to transfer from the higher to lower system.
Explanation:
Hope this helps
A holiday ornament in the shape of a hollow sphere with mass 0.015 kg and radius 0.055 m is hung from a tree limb by a small loop of wire attached to the surface of the sphere. If the ornament is displaced a small distance and released, it swings back and forth as a physical pendulum.
Calculate its period. (You can ignore friction at the pivot. The moment of inertia of the sphere about the pivot at the tree limb is 5MR²/3.)
Take the free-fall acceleration to be 9.80 m/s². Express your answer using two significant figures.
Answer: 0.61 s
Explanation:
Given
Mass of object, m = 0.015 kg
Radius of object, r = 0.055 m
Acceleration of object, g = 9.8 m/s²
In a pendulum,
T = 2π * √[I /(mgd)]
The moment of Inertia, I of a hollow sphere is given by
I(sphere) = 2/3MR² + MR²
I(sphere) = 5/3MR²
Also, d = R
Substituting these into the first equation, we have
T = 2π * √[(5/3MR²) / (mgr)]
T = 2π * √[(5/3r) / (g)]
T = 2 * 3.142 * √(5/3 * 0.055) / (9.8)]
T = 6.284 * √(0.092/9.8)
T = 6.284 * √0.00939
T = 6.284 * 0.097
T = 0.6095 s
To 2 significant figures,
The period is 0.61 s
What type of energy is the sum of an object’s potential and kinetic energy?
Answer: its mechanical energy
Explanation:
Answer:
Mechanical energy edg2021
Explanation:
The sum of an objects potential and kinetic energy is mechanical energy.
If a 2V battery is connected to the wire in one direction, the electrode that was the cathode becomes the anode and vice verse, but when the battery is connected the other way the cathode and anode do not switch. Explain why this is so, and what the voltages of the two situations are.
Answer:
1. This is so because of the charging and discharging phenomenon of the battery.
2. Voltage when fully charged: approximately 2.15 volts
Voltage when in use: drops below 2.15v
Explanation:
The anode is the electrode where electricity flows into. In contrast, the cathode is the electrode where the electricity flows out of. When a battery is connected to a load the electricity flows from the positive terminal to the negative terminal. In this case, the positive terminal is the cathode, and the negative terminal is the anode. Here the cathode and anode do not switch,
But when the battery is being charged, the electricity flows into the positive terminal instead of out of it. In this case, the roles are reversed, the electrode that was the cathode becomes the anode, and the anode becomes that cathode.
A fully charged 2volt battery has a voltage of approximately 2.15 volts. A fully discharged 2 volt battery has a voltage of 1.9 volts
(a) Neil A. Armstrong was the first person to walk on the moon. The distance between the earth and the moon is . Find the time it took for his voice to reach the earth via radio waves. (b) Someday a person will walk on Mars, which is from the earth at the point of closest approach. Determine the minimum time that will be required for a message from Mars to reach the earth via radio waves.
Answer:
a) It took 1.28 seconds to Neil Armstrong's voice to reach the Earth via radio waves.
b) The minimum time that will be required for a message from Mars to reach the Earth via radio waves is 192 seconds.
Explanation:
The electromagnetic spectrum is the distribution of radiation due to the different frequencies at which it radiates and its different intensitie. That radiation is formed by electromagnetic waves, which are transverse waves formed by an electric field and a magnetic field perpendicular to it.
The distribution of the radiation in the electromagnetic spectrum can also be given in wavelengths, but it is more frequent to work with it at frequencies:
Gamma rays X-rays Ultraviolet rays Visible region InfraredMicrowave Radio waves.Any radiation that belongs to electromagnetic spectrum has a speed in vacuum of [tex]3x10^{8}m/s[/tex].
a) Find the time it took for his voice to reach the Earth via radio waves.
To know the time that took for Neil Armstrong's voice to reach the Earth via radio waves, the following equation can be used:
[tex]c = \frac{d}{t}[/tex] (1)
Where v is the speed of light, d is the distance and t is the time.
Notice that t can be isolated from equation 1.
[tex]t = \frac{d}{c}[/tex] (2)
The distance from the Earth to the Moon is [tex]3.85x10^{8} m[/tex], therefore.
[tex]t = \frac{3.85x10^{8} m}{3x10^{8}m/s}[/tex]
[tex]t = 1.28s[/tex]
Hence, it took 1.28 seconds to Neil Armstrong's voice to reach the Earth via radio waves.
b) Determine the minimum time that will be required for a message from Mars to reach the Earth via radio waves.
The distance from the Earth to the Mars at its closest approach is [tex]5.76x10^{10}m[/tex], therefore.
[tex]t = \frac{5.76x10^{10}m}{3x10^{8}m/s}[/tex]
[tex]t = 192s[/tex]
Hence, the minimum time that will be required for a message from Mars to reach the Earth via radio waves is 192 seconds.
As matter changes state from gas to liquid, which of these statements is true?
Answer:
it is condensing , intermolecular forced are getting stronger
Explanation:
condensation is gas to liquid and intermolecular forces are attaction and liquid molecules are colser together so they have more intermolecular forces hope this helps god bless
Two 1.50-V batteries—with their positive terminals in the same direction—are inserted in series into the barrel of a flashlight. One battery has an internal resistance of 0.390 Ω, the other an internal resistance of 0.120 Ω. When the switch is closed, a current of 600 mA occurs in the lamp.What fraction of the power dissipated is dissipated in the batteries?
Answer:
im sorry i dont wanna give you a wrong answer if you want one tho ill give it to you
Explanation:
How much would a 77.7 kg person weigh (a) on Earth's Moon, where the acceleration of gravity is 1.63 m/s2, and (b) on Mars, where the acceleration of gravity is 3.77 m/s2?
Answer:
The answer to your question is below
Explanation:
Data
mass of the person = 77.7 kg
gravity on the moon = 1.63 m/s²
gravity on mars = 3.77 m/s²
Process
To find the weight of a person, use Newton's second law.
Formula
Force = mass x acceleration but Weight = mass x gravity
a)
Weight = 77.7 x 1.63
Weight = 126.65 N
b)
Weight = 77.7 x 3.77
Weight = 292.93 N
variable.
Use the drop-down menus to complete each sentence.
To run the physics cart, the fan speed of the cart is manipulated. This is the
The cart accelerates due to the speed of the fan. Acceleration is therefore thinder
A"constant" is a parameter that stays the same regardless of the variables.
dependent
constant
constant is the
of the cart that is held
) Intro
Done
Answer:
Independent
Dependent
Mass
Explanation:
The International Space Station is orbiting at an altitude of about 370 km above the earth's surface. The mass of the earth is 5.976 × 1024 kg and the radius of the earth is 6.378 × 106 m. Assuming a circular orbit, what is the period of the International Space Station's orbit?
Answer:
T = 5516.63 seconds
Explanation:
Given that,
The International Space Station is orbiting at an altitude of about 370 km above the earth's surface.
Mass of the Earth, [tex]M=5.976 \times 10^{24}\ kg[/tex]
Radius of Earth, [tex]r=6.378\times 10^6\ m[/tex]
We need to find the period of the International Space Station's orbit. It is a case of Kepler's third law. Its mathematical form is given by :
[tex]T^2=\dfrac{4\pi^2}{GM}\times R^3[/tex]
R = r + h
[tex]T^2=\dfrac{4\pi^2}{6.67\times 10^{-11}\times 5.976 \times 10^{24}}\times (370000+6.378\times 10^6)^3\\\\T^2=30433264.1641\ s\\\\T=5516.63\ s[/tex]
So, the period of the International Space Station's orbit is 5516.63 seconds.
summarize the physical reasons that sound waves travel at different speeds through different mediums
The speed of sound varies in different media due to the rigidity (or compressibility in gases) and density of the medium. More rigid and less compressible media enable faster sound travel, while greater density can slow it down. Temperature also plays a role, with higher temperatures often leading to faster sound propagation.
Explanation:Understanding the Speed of Sound in Different MediumsSound waves travel at different speeds through different media because of the medium's rigidity and density. A medium's rigidity, or in the case of gases, compressibility, greatly influences the speed of sound. The more rigid or less compressible a medium is, the faster sound travels through it. Additionally, sound travels through a medium of lower density faster when the materials have similar rigidity, because the energy transfer between particles is more efficient.
Liquids and solids, for instance, are harder to compress and more rigid compared to gases, which accounts for the higher speed of sound in these media. However, the relationship is not straightforward with density, as an increased density can actually slow the propagation of sound, due to the increased mass particles have to move. Finally, temperature also affects the speed at which sound travels; hotter media makes particles more energetic and thus can increase the speed of sound.
It's important to understand these physical principles when considering applications such as medical imaging using ultrasonic waves or studying the properties of materials through acoustic analysis.
**URGENT, I WILL PAY 30 POINTS, PLEASE HELP**
Which wave has the shortest wavelength, assuming the axis for each wave is identical?
All three windows are the same size.
A has 10 complete waves visible through the window. B has 3, and C has 4.
So A must have the smallest wavelengths.
The answer is A.
The wavelength is the length to each curve. Each answer choice has the same length of a box so we can count the amount of curves in each option.
Option A has 10 visible curves.
Option B has 3 visible curves.
Option C has 4 visible curves.
Since option A has the most curves, that means that it has the shortest wavelengths.
Best of Luck!
Una muestra de 500g de agua se calienta desde 10°C hasta 80°C. Calcula la cantidad de calor absorbido por líquido si su calor específico es 4186J/kg ×K
Answer:
Q = 142.324kJ
Explanation:
Data:
M = 500g = 0.5kg
T1 = 10°C = (10 + 273.15)K = 285.15K
T2 = 80°C = (80 + 273.15)K = 353.15K
Q = ?
C = 4186J/kg.K
Q = mc(T2 - T1)
Q = 0.5 * 4186 * (353.15 - 285.15)
Q = 0.5 * 4186 * 68
Q = 142324J
Q = 142.324kJ.
The heat absorbed by a 500g sample of water when heated from 10°C to 80°C is calculated using the heat transfer formula q=mcΔT. Here m is mass ie, 0.5kg, c is specific heat capacity i.e., 4186 J/kg*°C, and ΔT is change in temperature i.e., 70°C. After substituting these values in the formula, we find that the heat absorbed, q, is approximately 146300 J.
Explanation:The question refers to the equation q = mcΔT for calculating heat transfer, where 'q' represents the heat absorbed, 'm' denotes mass, 'c' represents specific heat capacity, and 'ΔT' denotes the change in temperature. In this case, by inserting the values into equation, we have q = (0.5 kg) * (4186 J/kg*°C) * (80°C - 10°C). After resolving this, we find q equals approximately to 146300 J, which is the amount of heat absorbed by the water.
Learn more about Heat Transfer here:https://brainly.com/question/31065010
#SPJ3
Diffuse reflection occurs when the size of surface irregularities is
Diffuse reflection occurs when the irregularities of a surface are comparable to or larger than the wavelength of the incident light, causing light to scatter in multiple directions.
Diffuse reflection occurs when light reflects off a surface that has irregularities comparable to or larger than the wavelength of the incident light. The surface's unevenness causes the incoming light rays to reflect in multiple directions, giving a non-glossy or matte appearance to the surface. This should be contrasted with specular reflection, where a smooth surface reflects light in a singular, coherent direction, maintaining the angle of incidence equal to the angle of reflection.
A familiar example of diffuse reflection is the way sunlight illuminates a room; the light is scattered by the walls and objects, which have microscopically rough surfaces. In contrast, a mirror provides a clear image due to specular reflection because its surface irregularities are much smaller than the wavelength of visible light. This principle of diffuse versus specular reflection is fundamental in understanding how different materials and surfaces affect the quality of reflected light.
Water occupies two main fluid compartments within the body, the intracellular fluid compartment and the extracellular fluid compartment. Which of the following statements is true concerning the volume of intracellular fluidA. The ICF fluid compartment changes, so there is no way to determine the amount of water at a given timeB. Approx. One third of the water is in the ICF compartmentC. Approx. Two thirds of the water is in the ICF compartmentD. All of the water is in the ICF compartment
Answer:
C. Approx. Two thirds of the water is in the ICF compartment
Explanation:
The body cells are bathed in fluids internally and externally. The water inside the cells make up about 42% of the total body weight and is called the intracellular fluid (ICF). The rest of the fluid outside the cells is called extracellular fluid (ECF) and is separated from the intracellular fluid by a semipermeable membrane that surrounds the cell, and only allows fluid to flow in and out of the cells, but prevents unwanted molecules or materials from getting in.
A light ray in air enters and passes through a block of glass. What can be stated with regard to its speed after it emerges from the block? Speed is less than when in glass. Speed is less than before it entered glass. Speed is same as that in glass. Speed is same as that before it entered glass.
Answer:
Speed is same as that before it entered glass.
Explanation:
Given:
A light ray enters and passes through the glass as shown in the diagram.
We have to analyze its speed.
Speed of light in air is [tex]3\times 10^8\ ms^-^1[/tex] and speed of light in glass is [tex]2.25\times 10^8\ ms^-^1[/tex]
Whenever a light ray enters a glass block or slab there is bending of light at the interface of the two media.
So speed of light will decrease in glass medium and again it passes to the air.
So
Speed of light in air will again increase or will be equivalent to the earlier speed when it was entering the glass block.
Finally
Speed is same as that before it entered glass as it in the same medium (air).
Speed of light is same as that before it entered glass. Option D is correct.
Refraction:
When a light ray move from one medium to another, it slows down, hence bend.
Here, light ray from air enters from the air to glass and emerges out of the glass block.
Speed of light in air is [tex]\bold {3x10^8\ m /s}[/tex]
Speed of light in glass is [tex]\bold {2.25 x10^8\ m /s}[/tex]
Since, the light ray was in the air is same before entering in to the glass.
Therefore, speed of light is same as that before it entered glass.
To know more about light ray,
https://brainly.com/question/1030839
A garden hose attached with a nozzle is used to fill a 10‐ gal bucket. The inner diameter of the hose is 2 cm, and it reduces to 0.8 cm at the nozzle exit. If it takes 50 s to fill the bucket with water, determine (a) the volume and mass flow rates of water through the hose, and (b) the average velocity of water at the nozzle exit.
Answer:
Explanation:
Given
Volume of bucket [tex]V=10\ gallon[/tex]
Time taken to fill the bucket [tex]t=50\ s[/tex]
so volume flow rate is [tex]\dot{V}=\frac{10}{50}=0.2\ gal/s[/tex]
1 gal is equivalent to [tex]0.133\ ft^3[/tex]
[tex]\dot{V}=0.0267\ ft^3/s[/tex]
mass flow rate [tex]\dot{m}=\rho \times \dot{V}[/tex]
[tex]\dot{m}=62.4\times 0.0267[/tex]
[tex]\dot{m}=1.668\ lbs[/tex]
(b)Average velocity through nozzle exit
[tex]\dot{V}=Av_{avg}[/tex]
[tex]v_{avg}=\dfrac{0.0267}{\frac{\pi}{4}\times (0.0262)^2}[/tex]
[tex]v_{avg}=49.51\ ft/s[/tex]
The volume flow rate is 757.082 cm^3/sec and the mass flow rate is 757.082 g/sec. The average velocity of the water at the nozzle exit is approximately 476.677 cm/sec.
Explanation:To solve this problem, we first need to figure out the volume and mass flow rates of the water. Given that 1 gallon = 3.78541 liters, and 1 liter = 1,000 cm3, a 10-gallon bucket contains 10 * 3.78541 * 1000 = 37,854.1 cm3. If it takes 50 seconds to fill this bucket, we can calculate the volume flow rate as volume/time = 37,854.1 cm3/50 s = 757.082 cm3/s.
The mass flow rate can be determined by multiplying this volume flow rate by the density of water (1 g/cm3), giving a result of 757.082 g/s.
To find the average velocity of the water at the nozzle exit, we use the equation of continuity which states that the volume flow rate must be constant at all points in the pipe. Therefore, the velocity at the nozzle can be found by dividing the flow rate by the cross-sectional area of the nozzle (pi * (d/2)2). This gives an average velocity of about 476.677 cm/s.
Learn more about Fluid Dynamics here:https://brainly.com/question/34422717
#SPJ3
____is the only item that exists on earth at standard pressures as a solid, liquid, and gas.
Answer:
Plasma
Explanation:
Answer:
I think the answer is water.
Explanation:
It becomes a solid when frozen, when it's at it's true form it's a liquid, and when it evaporates it becomes water vapor (which is basically gas).
The data indicate the populations of mammals in the Florida Everglades in different years over the past two decades. The Burmese python, a non-native species, was introduced to Florida as an exotic pet. After Hurricane Andrew hit Florida in 1992, many pet owners lost track of their non-native snakes. The biodiversity of the Everglades has decreased since then. According to the data, what hypothesis is best supported with regard to Burmese pythons and Florida Everglade biodiversity? A) Burmese pythons are omnivorous and have decreased all populations of mammals. B) Burmese pythons compete with the white-tailed deer most directly for food sources. C) Burmese pythons lack natural predators and can utilize a wide variety of food sources in the Everglades. D) Burmese pythons carry diseases and parasites that directly impact the mammal populations of the Everglades.
Answer:
C) Burmese pythons lack natural predators and can utilize a wide variety of food sources in the Everglades.
Explanation:
Due to it being an invasive specie (naturally found in South Asia), and also one of the five largest species of snakes in the world, the Burmese pythons lack natural predators in this new territories.
The Burmese viper is also an opportunistic hunter and would eat anything it can overpower, it easily made a wide range of food varieties in these swamps.
The best-supported hypothesis regarding the impact of Burmese pythons on the biodiversity of the Florida Everglades is option C: Burmese pythons lack natural predators and can utilize a wide variety of food sources in the Everglades.
Burmese pythons have become a notorious invasive species in Florida Everglades, with their introduction traced back to events such as Hurricane Andrew. This species has a significant negative impact on local ecosystems primarily due to its wide-ranging diet and absence of natural predators, which allows for unchecked population growth. The data indicating a decrease in Everglades' mammal populations correlates with the introduction and proliferation of pythons, who can consume a broad array of species. Similar scenarios observed in other ecosystems, like the brown tree snake in Guam and the Nile perch in Lake Victoria, support the idea that invasive predators can cause extinctions and greatly disrupt native biodiversity. The Burmese python's adapting capabilities and generalist diet make it a formidable invader that furthers the decline of various mammal populations, sustains its population expansion, and consequently diminishes Everglades biodiversity.
How is the solubility of a gas in a liquid normally affected by temperature?
Answer:
Increase in temperature decrease the solubility of games in liquid
Explanation:
Solubility simply means the amount of solute that can be dissolved in a given amount of solute at a given temperature.Gases when heated gains extreme kinetic energy which gives rise to an exothermic reaction,the kinetic energy breaks the individual bonds holding gas molecules leading to their escape,so an increase in temperature decrease the solubility of gas in liquid
Which kind of weather usually forms over the northwest united states in the summer because of maritime polar air masses?
Answer:
Cloudy and damp weather
Explanation:
Maritime Polar can form anytime of the year and because they are not as cold as continental polar which brings hot and humid air
The cool and moist Maritime Polar air masses brings cloudy and damp weather to the USA.
Maritime polar air masses form over the northern Atlantic and the northern Pacific oceans. They most often influence the Pacific Northwest and the Northeast.
Answer:
Fog
Explanation:
You put mass m1 of ice cooled to -20C into mass m2 of water at 2C. Both are in a thermally insulated chamber. In the final state of the system: A. Everything turns to ice at a temperature below 0C. B. Everything melts and is at a temperature above 0C. C. There is a mixture of water and ice as the final state. D. The water and ice never reach the same temperature. E. There is not enough information to find the final temperature.
Answer:
E. There is not enough information to find the final temperature.
Explanation:
We do not the actual masses of ice and water involved in the question, so we cannot determine if the water freezes or the ice melts. So, there is not enough information to find the final temperature.