UsingLewissymbolsandLewisstructures,diagramthefor- mation of SiCl4 from Si and Cl atoms, showing valence-shell electrons. (a) How many valence electrons does Si have ini- tially? (b) How many valence electrons does each Cl have initially? (c) How many valence electrons surround the Si in the SiCl4 molecule? (d) How many valence electrons sur- round each Cl in the SiCl4 molecule? (e) How many bonding pairs of electrons are in the SiCl4 molecule?
Answers
Answer:
(a) 4
(b) 7
(c) 8
(d) 8
(e) 4
Explanation:
In order to draw the Lewis structure, we need to take into account the octet rule: atoms will share electrons to have 8 electrons in their valence shell.
(a) How many valence electrons does Si have initially?
Si has 4 valence electrons. It has to share 4 pairs of electrons to reach the octet.
(b) How many valence electrons does each Cl have initially?
Cl has 7 valence electrons. Each Cl has to share 1 pair of electrons to reach the octet.
(c) How many valence electrons surround the Si in the SiCl₄ molecule?
Si is surrounded by 8 electrons in SiCl₄.
(d) How many valence electrons surround each Cl in the SiCl₄ molecule?
Each Cl is surrounded by 8 electrons in SiCl₄.
(e) How many bonding pairs of electrons are in the SiCl₄ molecule?
There are 4 bonding pairs between Si and Cl.
Silicon (Si) forms SiCl₄ by bonding with four chlorine (Cl) atoms. Si initially has 4 valence electrons, while each Cl has 7. In SiCl₄, Si has 8 valence electrons, and each Cl has 8. There are four bonding pairs of electrons in the molecule, formed by single bonds between Si and Cl.
Lewis Structure for the Formation of SiCl₄:
(a) **Valence Electrons in Si (Silicon):** Silicon is in Group 14 of the periodic table, so it has 4 valence electrons.
(b) **Valence Electrons in Each Cl (Chlorine) Atom:** Chlorine is in Group 17, so each Cl atom has 7 valence electrons.
(c) **Valence Electrons Surrounding Si in SiCl₄ Molecule:** In SiCl₄, Silicon forms four single bonds with four Cl atoms. Each bond involves two electrons. Therefore, around Silicon, there are 4 * 2 = 8 valence electrons.
(d) **Valence Electrons Surrounding Each Cl in SiCl₄ Molecule:** Each Cl atom is involved in one bond with Si, contributing one pair of electrons. Therefore, each Cl has a total of 8 valence electrons around it (7 from its own valence shell plus 1 from the shared bond).
(e) **Bonding Pairs of Electrons in SiCl₄ Molecule:** Since Si forms four single bonds with four Cl atoms, there are four bonding pairs of electrons in the SiCl₄ molecule.
Learn more about Lewis Structure here:
https://brainly.com/question/30459965
#SPJ6
Related Questions
Which of these statements is true?
(a) All spontaneous reactions have a negative enthalpy change
(b) All spontaneous reactions have a positive entropy change
(c) All spontaneous reactions have a positive free-energy change
(d) All spontaneous reactions have a negative free-energy change
(e) All spontaneous reactions have a negative entropy change
Answers
Answer:
(d) All spontaneous reactions have a negative free-energy change
Explanation:
All spontaneous reactions releases free energy which can be used later for the work to be done. A reaction with a negative value for ΔG releases free energy and is thus spontaneous
Among the options listed, the correct statement is that all spontaneous reactions result in a negative free-energy change, reflecting the energy released during the process. So the correct option is d.
Explanation:The true statement among the options provided is:
(d) All spontaneous reactions have a negative free-energy change.
This is based on the principles of thermodynamics. The second law of thermodynamics states that the entropy of the universe increases in the course of spontaneous reactions. Nevertheless, a characteristic of spontaneous processes is that they release free energy, leading to a negative change in Gibbs free energy (ΔG). Therefore, not all spontaneous reactions have a negative enthalpy change (ΔH), nor do they always have a positive entropy change (ΔS), but they must result in a decrease in Gibbs free energy (negative free-energy change).
In the laboratory a student determines the specific heat of a metal. He heats 19.5 grams of copper to 98.27 °C and then drops it into an insulated cup containing 76.3 grams of water at 24.05 °C. When thermal equilibrium is reached, he measures the final temperature to be 25.69 °C. Assuming that all of the heat is transferred to the water, he calculates the specific heat of copper to be__________ J/g°C.
Answers
Answer:
The specific heat of copper is 0.37 J/g°C
Explanation:
Step 1: Data given
Mass of copper = 19.5 grams
Initial temperature of copper = 98.27 °C
Mass of water = 76.3 grams
Initial temperature of water = 24.05 °C
Final temperature of water and copper = 25.69 °C
Step 2: Calculate specific heat of copper
Qgained = -Qlost
Q = m*c*ΔT
Qwater = -Qcopper
m(water) * c(water) * ΔT(water) = - m(copper) * c(copper) *ΔT(copper)
⇒ with m(water) = 76.3 grams
⇒ with c(water) = 4.184 J/g°C
⇒ with ΔT(water) = T2-T1 = 25.69 - 24.05 = 1.64
⇒ with m(copper) = 19.5 grams
⇒ with c(copper) = TO BE DETERMINED
⇒ with ΔT(copper) = T2-T1 = 25.69 - 98.27 = -72.58
76.3 * 4.184 * 1.64 = - 19.5 * c(copper) * -72.58
523.552 = 1415.31 * c(copper)
c(copper) = 0.37 J/g°C
The specific heat of copper is 0.37 J/g°C
A liquid of density 1290 kg/m 3 flows steadily through a pipe of varying diameter and height. At Location 1 along the pipe, the flow speed is 9.91 m/s and the pipe diameter d 1 is 10.5 cm . At Location 2, the pipe diameter d 2 is 16.7 cm . At Location 1, the pipe is Δ y = 9.01 m higher than it is at Location 2. Ignoring viscosity, calculate the difference Δ P between the fluid pressure at Location 2 and the fluid pressure at Location 1.
Answers
Answer:
114 kPa
Explanation:
By Bernoulli's equation when a fluid flows steadily through a pipe:
P + ρ*g*y + v² = constant in the pipe, where P is the pressure, ρ is the density of the fluid, g is the gravity acceleration (9.8 m/s²), y is the high, and v the velocity.
By the continuity equation, the liquid flow must be constant in the pipe, and then:
A1*v1 = A2*v2
Where A is the area, v is the velocity, 1 is the point 1, and 2 the point 2 in the pipe. The are is the circle area: π*(d/2)². So:
π*(0.105/2)²*9.91 = π*(0.167/2)²*v2
0.007v2 = 0.027
v2 = 3.9 m/s
Then:
P1 + ρ*g*y1 + v1² = P2 + ρ*g*y2 + v2²
ρ*g*y1 - ρ*g*y2 + v1² - v2² = P2 - P1
ρ*g*Δy + v1² - v2² = ΔP
ΔP = 1290*9.8*9.01 + 9.91² - 3.9²
ΔP = 113,987.42 Pa
ΔP = 114 kPa
A 75.0 mL 75.0 mL aliquot of a 1.70 M 1.70 M solution is diluted to a total volume of 278 mL. 278 mL. A 139 mL 139 mL portion of that solution is diluted by adding 165 mL 165 mL of water. What is the final concentration? Assume the volumes are additive.
Answers
Answer:
0.210 M
Explanation:
A 75.0 mL aliquot of a 1.70 M solution is diluted to a total volume of 278 mL.
In order to find out the resulting concentration (C₂) we will use the dilution rule.
C₁ × V₁ = C₂ × V₂
1.70 M × 75.0 mL = C₂ × 278 mL
C₂ = 0.459 M
A 139 mL portion of that solution is diluted by adding 165 mL of water. What is the final concentration? Assume the volumes are additive.
Since the volumes are additive, the final volume V₂ is 139 mL + 165 mL = 304 mL. Next, we can use the dilution rule.
C₁ × V₁ = C₂ × V₂
0.459 M × 139 mL = C₂ × 304 mL
C₂ = 0.210 M
Answer:
The correct answer is 0.21 M
Explanation:
We have an initial solution of concentration 1.70 M and we dilute it twice. In each dilution we can calculate the final concentration (Cf) from the initial concentration (Ci) and the final and initial volumes respectively (Vf and Vi) as follows:
Cf x Vf= Ci x Vi
Cf= Ci x Vi/ Vf
In the first dilution, Ci is 1.70 M, the initial volume we take is 75 ml and the final volume is 278 ml.
Cf= 1.70 M x 75 ml / 278 ml = 0.46 M
In the second dilution, the initial concentration is the previously obtained (Ci= 0.46 M), the initial volume is Vi= 139 ml and the final volume is the addition of 139 ml and 165 ml (because we add 165 ml to 139 ml). Thus:
Cf= (0.46 M x 139 ml)/ (139 ml + 165 ml) = 0.21 M
Write a net ionic equation to show how triethylamine, (C2H5)3N, behaves as a base in water. The substance 2-methylpiperidine is a weak nitrogenous base like ammonia. Complete the following equation that shows how 2-methylpiperidine reacts when dissolved in water.
Answers
You may find bellow the net ionic equations.
Explanation:
Net ionic equation of triethylamine in water:
(C₂H₅)₃N (l) + H₂O (l) → (C₂H₅)₃NH⁺ (aq) + OH⁻ (aq)
where:
(l) - liquid
(aq) - aqueous
You may find in the attached picture the ionization of 2-methylpiperidine in water.
Learn more about:
net ionic equations
https://brainly.com/question/7018960
https://brainly.com/question/7428881
#learnwithBrainly
Triethylamine and 2-methylpiperidine act as weak bases in water, accepting protons to form hydroxide ions and their respective conjugate acids. This is an example of base ionization. It was not possible to provide an exact equation for 2-methylpiperidine without a specific structure.
Explanation:When triethylamine, also a weak nitrogen base like ammonia, is dissolved in water, it accepts a proton from a water molecule to form a hydroxide ion (OH-) and an ethylammonium ion ((C2H5)3NH+). This is represented by the equation: (C2H5)3N(aq) + H2O(l) ⇌ (C2H5)3NH+(aq) + OH-(aq).
Similarly, 2-methylpiperidine being a weak base, will also react with water to form hydroxide ions (OH-) and 2-methylpiperidinium ions. However, without a specific structure for 2-methylpiperdine, it's challenging to write the exact equation.
These are examples of base ionization, where a base reacts with water to produce hydroxide ions and a conjugate acid. Both triethylamine and 2-methylpiperidine act as Brønsted bases, accepting protons from water molecules.
Learn more about Base Ionization here:https://brainly.com/question/33918764
#SPJ11
A 50.0 mL sample containing Cd2+ and Mn2+ was treated with 56.3 mL of 0.0500 M EDTA. Titration of the excess unreacted EDTA required 13.4 mL of 0.0310 M Ca2+. The Cd2+ was displaced from EDTA by the addition of an excess of CN−. Titration of the newly freed EDTA required 28.2 mL of 0.0310 M Ca2+. What are the concentrations of Cd2+ and Mn2+ in the original solution?
Answers
Answer:
The concentration of Cd2+ is 0.0175 M
The concentration of Mn2+ is 0.0305 M
Explanation:
Step 1: Data given
A 50.0 mL sample contains Cd2+ and Mn2+
volume of 0.05 M EDTA = 56.3 mL
Titration of the excess unreacted EDTA required 13.4 mL of 0.0310 M Ca2+.
Titration of the newly freed EDTA required 28.2 mL of 0.0310 M Ca2+
Step 2: Calculate mole ratio
The reaction of EDTA and any metal ion is 1:1, the number of mol of Cd2+ and Mn2+ in the mixture equals the total number of mol of EDTA minus the number of mol of EDTA consumed in the back titration with Ca2+:
Step 3: Calculate total mol of EDTA
Total EDTA = (56.3 mL EDTA)(0.0500 M EDTA) = 0.002815 mol EDTA
Consumed EDTA = 0.002815 mol – (13.4 mL Ca2+)(0.0310 M Ca2+) = 0.002815 - 0.0004154 = 0.0023996 mol EDTA
Step 4: Calculate total moles of CD2+ and Mn2+
So, the total moles of Cd2+ and Mn2+ must be 0.0023996 mol
Step 5: Calculate remaining moles of Cd2+
The quantity of cadmium must be the same as the quantity of EDTA freed after the reaction with cyanide:
Moles Cd2+ = (28.2 mL Ca2+)(0.0310 M Ca2+) = 0.0008742 mol Cd2+.
Step 6: Calculate remaining moles of Mn2+
The remaining moles must be Mn2+: 0.0023996 - 0.0008742 = 0.0015254 moles Mn2+
Step 7: Calculate initial concentrations
The initial concentrations must have been:
(0.0008742 mol Cd2+)/(50.0 mL) = 0.0175 M Cd2+
(0.0015254 mol Mn2+)/(50.0 mL) = 0.0305 M Mn2+
The concentration of Cd2+ is 0.0175 M
The concentration of Mn2+ is 0.0305 M
If 44.5 mL of 0.0989M sodium hydroxide solution is needed to titrate the amount of acetic acid in a 5.00 mL sample of vinegar, what is the weight/weight percent (w/w %) of acetic acid in the vinegar.
(MM acetic acid = 60.04 g) Do not include units in your answer. Use the correct number of significant figures.
Answers
Answer:
5.28 %
Explanation:
To solve this problem we are going to calculate the moles of NaOH required to titrate the vinegar. Since this reaction is one mole NaOH to 1 mol acetic acid we will have the moles of acetic acid present in the 5 mL sample . By multiplying the number of moles of acetic acid by its molecular weight we obtain the grams of acid.
Now since we are being asked the w/w % we need the weight of solution which is not given in the problem. However we can assume that its value will be close to that of pure water and give it the value of 5 g since the density of water is one g/mL.
moles NaOH = 44.5 mL x 1L/1000 mL x 0.098 mol/L = 0.00440
mol acetic acid = 0.00440
mass acetic acid = 0.00440 mol x 60.04 g/mol = 0.264 g acetic acid
percent (w/w) = (0.264 g/ 5 g ) x 100 = 5.28 %
Which of the reactions are exothermic?
A. 2Mg(s) + O2( g ) -----> 2MgO (s) Δ H = − 1203 kJ/mol
B. NH3 (g) + HCl (g)-----> NH4Cl (s) Δ H = − 176 kJ/mol
C. AgCl (s) ------> Ag + (aq) + Cl − (aq) Δ H = 127 kJ/mol
D. 2 Fe2O3 (s) + 3C (s)-------> 4Fe (s) + 3CO2 (g) Δ H = 468 kJ/mol
E. C(graphite) + O2 (g) -------> CO2 (g) Δ H = − 393.5 kJ/mol
F. CH4 (g) + 2O2 (g) -------> CO2 (g) + 2H2O (l) Δ H = − 891 kJ/mol
Answers
Answer:
Reaction A, B, E and F are exothermic reactions.
Explanation:
Exothermic reactions are defined as the reactions in which energy of reactants is more than the energy of the products. In these reactions, energy is released by the system.
The total enthalpy of the reaction [tex](\Delta H)[/tex] comes out to be negative.
Endothermic reactions are defined as the reactions in which energy of products is more than the energy of the reactants. In these reactions, energy is absorbed by the system.
The total enthalpy of the reaction [tex](\Delta H)[/tex] comes out to be positive.
So, from the given option reaction which are exothermic are with negative value [tex](\Delta H)[/tex] that enthalpy of reaction and those are:
1) [tex]2Mg(s) + O_2( g )\rightarrow 2MgO (s)[/tex],ΔH = -1203 kJ/mol
2)[tex]NH_3 (g) + HCl (g)\rightarrow NH_4Cl (s)[/tex],ΔH =-176 kJ/mol
3) [tex]C(graphite) + O_2 (g)\rightarrow CO_2 (g) [/tex],ΔH = -393.5 kJ/mol
4) [tex]CH_4 (g) + 2O2 (g)\rightarrow CO_2 (g) + 2H_2O (l) [/tex],ΔH =-891 kJ/mol
Reactions A, B, and E are exothermic because they have negative ΔH values, indicating that energy is released during these reactions.
Explanation:Exothermic reactions are characterized by the release of heat, which is indicated by a negative change in enthalpy (ΔH). In the provided reactions, reactions A (2Mg(s) + O2( g ) -----> 2MgO(s) ΔH = -1203 kJ/mol), B (NH3(g) + HCl(g) -----> NH4Cl (s) ΔH = -176 kJ/mol), and E (C(graphite) + O2(g) -----> CO2(g) ΔH = -393.5 kJ/mol) are exothermic because they have negative ΔH values, indicating that energy is released during these reactions. Conversely, reactions C and D are endothermic (they absorb heat), as indicated by their positive ΔH values.
Learn more about Exothermic Reactions here:https://brainly.com/question/10373907
#SPJ3
For which of the following reactions will the reactant experience the largest degree of decomposition
upon reaching equilibrium at 500 K?
A) 2NO2F(g)--> 2NO2(g) + F2(g); Kp = 6.6 10-22
B) 2SO3(g)--> 2SO2(g) + O2(g); Kp = 1.3 10-5
C) 2NOF(g)--> 2NO(g) + F2(g); Kp = 1.2 10-26
D) 2NOCl(g)--> 2NO(g) + Cl2(g); Kp = 1.7 10-2
E) 2NO2(g)--> 2NO(g) + O2(g); Kp = 5.9 10-5
Answers
Answer:
D) 2 NOCl(g) ⇄ 2 NO(g) + Cl₂(g); Kp = 1.7 × 10⁻²
Explanation:
In order to compare the degree of decomposition of these reactions, we have to compare the equilibrium constant Kp. Kp is equal to the partial pressure of the products raised to their stoichiometric coefficients divided by the partial pressure of the reactants raised to their stoichiometric coefficients. The higher the Kp, the more products and fewer reactants at equilibrium. Among these reactions, D is the one that has the highest Kp, therefore the one experiencing the largest degree of decomposition.
Fe(II) can be precipitated from a slightly basic (aq) solution by bubbling oxygen through the solution, which converts Fe(II) to insoluble Fe(III):4Fe(OH)+(aq)+ 4OH-(aq)+O2(g)+2H2O(l)=4Fe(OH)3(s)how many grams of O2 are consumed to precipitate all of the iron in 85ml of 0.075 M Fe(II).
Answers
Answer:
0,051g of O₂ are consumed
Explanation:
The reaction of precipitation of Fe(II) is:
4Fe(OH)⁺(aq) + 4OH⁻(aq) + O₂(g) + 2H₂O(l) → 4Fe(OH)₃(s)
The moles of Fe(II) you have in 85ml of 0.075 M Fe(II) are:
0,085L×0,075M = 6,4x10⁻³ moles of Fe(II)
For the reaction, you require 4 moles of Fe(II) and 1 mol of O₂(g) to precipitate the iron. Thus, moles of O₂(g) you require are:
6,4x10⁻³ moles of Fe(II)×[tex]\frac{1molO_2}{4molesFe(II)}[/tex] = 1,6x10⁻³ moles of O₂(g)
These moles are:
1,6x10⁻³ moles of O₂(g)×[tex]\frac{32g}{1mol}[/tex] = 0,051g of O₂ are consumed
I hope it helps!
In which of the following reactions does a decrease in the volume of the reaction vessel at constant
temperature favor formation of the products?
A) 2H2(g) + O2(g)--> 2H2O(g)
B) NO2(g) + CO(g)--> NO(g) + CO2(g)
C) H2(g) + I2(g)--> 2HI(g)
D) 2O3(g)--> 3O2(g)
E) MgCO3(s)--> MgO(s) + CO2(g)
Answers
Answer:
The correct option is: A) 2H₂(g) + O₂(g) → 2H₂O(g)
Explanation:
According to the Le Chatelier's principle, change in the volume of the reaction system causes equilibrium to shift in the direction that reduces the effect of the volume change.
When the volume decreases then the pressure of the reaction vessel increases, then the equilibrium shifts towards the reaction side that produces less number of moles of gas.
A) 2H₂(g) + O₂(g) → 2H₂O(g)
The number of moles of reactant is 3 and number of moles of product is 2.
Therefore, when volume decreases, the equilibrium shifts towards the product side, thereby favoring the formation of products.
B) NO₂(g) + CO(g) → NO(g) + CO₂(g)
The number of moles of reactant and product both is 2.
Therefore, when the volume decreases, the equilibrium does not shift in any direction.
C) H₂(g) + I₂(g) → 2HI(g)
The number of moles of reactant and product both is 2.
Therefore, when the volume decreases, the equilibrium does not shift in any direction.
D) 2O₃(g) → 3O₂(g)
The number of moles of reactant is 2 and number of moles of product is 3.
Therefore, when volume decreases, the equilibrium shifts towards the reactant side, thereby favoring the formation of reactants.
E) MgCO₃(s) → MgO(s) + CO₂(g)
The number of moles of reactant is 1 and number of moles of product is 2.
Therefore, when volume decreases, the equilibrium shifts towards the reactant side, thereby favoring the formation of reactants.
Which of the following chemical reactions has positive entropy change?
A. N2(g) + 3 H2(g) \longrightarrow ⟶ 2NH3(g)
B. Br2(g) \longrightarrow ⟶ Br2(l) N2O4(g)
C. \longrightarrow ⟶ 2 NO2(g)
D. NaOH(aq) + CO2(g) \longrightarrow ⟶ NaHCO3(aq)
Answers
Answer: [tex]N_2O_4(g)\longrightarrow 2NO_2(g)[/tex]
Explanation:
Entropy is the measure of randomness or disorder of a system. If a system moves from an ordered arrangement to a disordered arrangement, the entropy is said to decrease and vice versa.
[tex]\Delta S[/tex] is positive when randomness increases and [tex]\Delta S[/tex] is negative when randomness decreases.
a) [tex]N_2(g)+3H_2(g)\longrightarrow 2NH_3(g)[/tex]
4 moles of gas are converting to moles of gas, hence the entropy decreases.
b) [tex]Br_2(g)\longrightarrow Br_2(l)[/tex]
1 mole of gas is converting to 1 mole of liquid, hence the entropy decreases.
c) [tex]N_2O_4(g)\longrightarrow 2NO_2(g)[/tex]
1 mole of gas is converting to 2 moles of gas, hence the entropy increases.
d) [tex]NaOH(aq)+CO_2(g)\longrightarrow NaHCO_3(aq)[/tex]
1 mole of gas is disappearing , hence the entropy decreases.
Thus [tex]N_2O_4(g)\longrightarrow 2NO_2(g)[/tex] has positive entropy change.
Calculate the molar solubility of Cd(OH)2 when buffered at a pH = 12.30. The Ksp for Cd(OH)2 is 2.5 x 10-14. Calculate the molar solubility of Cd(OH)2 when buffered at a pH = 12.30. The Ksp for Cd(OH)2 is
a.2.5 x 10-14 M.
b. 8.5 x 10-6 M
c. 6.3 x 10-11 M
d. 1.3 x 10-12 M
e. 5.0 x 10-2 M
f. 1.8 x 10-5 M
Answers
Answer:
c. 6,3x10⁻¹¹M
Explanation:
The solubility of a buffer is defined as the concentration of the dissolved solid in a saturated solution. For the Cd(OH)₂, solubility is:
[Cd²⁺] = S
The dissolution of Cd(OH)₂ is:
Cd(OH)₂ ⇄ Cd²⁺ + 2OH⁻
And the ksp is defined as:
ksp = [Cd²⁺][OH⁻]²
As ksp = 2,5x10⁻¹⁴ and [OH⁻] at pH=12,30 = 10^-(14-12,30) = 0,01995M
2,5x10⁻¹⁴ = [Cd²⁺]×(0,01995M)²
[Cd²⁺] = 6,3x10⁻¹¹M
That means solubility is c. 6,3x10⁻¹¹M
I hope it helps!
The molar solubility of Cd(OH)2 when buffered at a pH of 12.30 can be calculated using the concept of hydrolysis. The correct answer is 6.3 x 10^(-11) M.
Explanation:To calculate the molar solubility of Cd(OH)2 when buffered at a pH of 12.30, we need to use the concept of hydrolysis. Cd(OH)2 is a slightly soluble salt that undergoes hydrolysis in aqueous solution. At a high pH value, OH- ions react with water to form more OH- ions, shifting the equilibrium towards the hydrolysis reaction.
First, we write the balanced equation for the hydrolysis reaction: Cd(OH)2(s) ⇌ Cd2+(aq) + 2OH-(aq)Since OH- is being produced, we can assume that the concentration of OH- is much greater than that of Cd2+. Therefore, we can ignore the concentration of Cd2+ when calculating the solubility product (Ksp).Next, we use the equation for the hydrolysis reaction to write the expression for the solubility product constant (Ksp): Ksp = [Cd2+][OH-]^2The concentration of OH- ions in a basic solution is related to the pH by the equation: pOH = 14 - pHUsing this equation, we can calculate the pOH of the buffered solution: pOH = 14 - 12.30 = 1.70Then, we convert the pOH back to OH- concentration: [OH-] = 10^(-pOH) = 10^(-1.70)Finally, we substitute the calculated [OH-] into the expression for Ksp to solve for the molar solubility of Cd(OH)2: [Cd(OH)2] = sqrt(Ksp / [OH-]^2)After performing the calculations, the molar solubility of Cd(OH)2 when buffered at a pH of 12.30 is approximately 6.3 x 10^(-11) M. Therefore, the correct answer is option c. 6.3 x 10^(-11) M.
Learn more about Molar solubility of Cd(OH)2 here:https://brainly.com/question/30905557
#SPJ11
Which statement about intermolecular forces is true?
Group of answer choices
A. Only occur in ionic bonds.
B. They have to be overcome to decompose a substance.
C. These forces hold atoms together in a molecule.
D. They are responsible for the physical properties of matter.
Answers
Intramolecular forces describe those forces that are found within the molecules and are shared by the electronic bonds. They hold the atoms and molecules together.
They are responsible for the holding of atoms together in a single molecule. Thus they also include electromagnetic forces of attraction and repulsion.Hence the option C is correct.
Learn more about the statement about intermolecular forces is true.
brainly.in/question/15903073.
The balanced equation for the reaction of ammonia and oxygen is the following. 4 NH3(g) + 5 O2(g) → 4 NO(g) + 6 H2O(g) The standard molar entropies for the products and reactants are listed below. Calculate the change in standard molar entropy for this reaction at 298.0 K and standard pressure, in J/mol·K. (Enter your answer to the tenths place. Include the sign of the value in your answer.)
Answers
Answer:
ΔS° = 180.5 J/mol.K
Explanation:
Let's consider the following reaction.
4 NH₃(g) + 5 O₂(g) → 4 NO(g) + 6 H₂O(g)
The standard molar entropy of the reaction (ΔS°) can be calculated using the following expression.
ΔS° = ∑np × S°p - ∑nr × S°r
where,
ni are the moles of reactants and products
S°i are the standard molar entropies of reactants and products
ΔS° = 4 mol × S°(NO(g)) + 6 × S°(H₂O(g)) - 4 mol × S°(NH₃(g)) - 5 mol × S°(O₂(g))
ΔS° = 4 mol × 210.8 J/K.mol + 6 × 188.8 j/K.mol - 4 mol × 192.5 J/K.mol - 5 mol × 205.1 J/K.mol
ΔS° = 180.5 J/K
This is the change in the entropy per mole of reaction.
Final answer:
The question requests the calculation of the change in standard molar entropy for a specific chemical reaction, but specific entropy values are not provided, making it impossible to complete the calculation as asked.
Explanation:
The question asks to calculate the change in standard molar entropy (ΔS°) for the reaction of ammonia (NH3) and oxygen (O2) to form nitrogen monoxide (NO) and water (H2O) at 298.0 K and standard pressure. The formula to use is ΔS° = ∑S°(products) - ∑S°(reactants). Unfortunately, the standard molar entropies (S°) for the reactants and products are not provided in the question. Normally, these values would be found in a standard thermodynamic table. Once you have these values, you would multiply the entropy of each substance by its coefficient in the balanced equation, sum these values for both reactants and products, and then subtract the sum for reactants from the sum for products. This will give you the change in entropy for the reaction.
The synthesis of CH3OH from CO and H2 is represented by the equation below.
CO + 2 H2 ---> CH3OH ΔH < 0
Which of the following statements is true about the bond energies in this reaction?
The energy absorbed as the bonds in the reactants is broken is greater than the energy released as the bonds in the products are formed.
The energy released as the bonds in the reactants is broken is greater than the energy absorbed as the bonds in the products are formed.
The energy released as the bonds in the reactants is broken is less than the energy absorbed as the bonds in the products are formed.
The energy absorbed as the bonds in the reactants is broken is less than the energy released as the bonds in the products are formed.
Answers
The energy absorbed as the bonds in the reactants are broken is less than the energy released as the bonds in the products are formed. This is indicative of an exothermic reaction.
Explanation:In the given reaction, CO + 2 H2 ---> CH3OH ΔH < 0, this is an exothermic reaction as indicated by the negative delta H value. The negative ΔH value signifies that the total energy released when the new bonds are formed in the product (CH3OH) is more than the total energy absorbed to break the bonds in the reactants (CO and H2).
Therefore, the correct statement is: The energy absorbed as the bonds in the reactants are broken is less than the energy released as the bonds in the products are formed.
This corresponds to the fact that in an exothermic reaction, the products are at a lower energy level than the reactants, therefore, energy is released in the reaction.
Learn more about Exothermic Reaction here:https://brainly.com/question/9799465
#SPJ12
The correct statement is that the energy absorbed as the bonds in the reactants is broken is less than the energy released as the bonds in the products are formed, indicating an exothermic reaction.
The correct statement is: The energy absorbed as the bonds in the reactants is broken is less than the energy released as the bonds in the products are formed.
In this specific reaction, energy is required to break a C-O triple bond and two H-H single bonds in the reactants. Energy is then released as three C-H single bonds, a C-O single bond, and an O-H single bond are formed in the product, CH₃OH.
Since ΔH is negative, it indicates that the total energy released in bond formation is greater than the total energy absorbed in bond breaking, reaffirming that the reaction is exothermic.
What is the mass percent concentration of solution containing 30 g kcl and 160 of water assume a density of 1.00g/ml for water?
Answers
Answer:
The mass percent = 15.79 %
Explanation:
Step 1: Data mass
Mass KCl = 30 grams
volume of water = 160 mL
density of water = 1.00 g/mL
Step 2: Calculate mass of water
mass water = volume * density of water
mass water = 160 mL / 1.00 g/mL
mass = 160 grams
Step 3: Calculate total mass of solution
30 grams + 160 grams = 190 grams
Step 4: Calculate mass % :mass KCl / Mass of solution
% mass = (30 grams / 190 gram) *100%
% mass = 15.79 %
The mass percent = 15.79 %
The slowest step of a reaction mechanism is called the
A.) Elementary Step
B.) Inhibitor
C.) Rate Law
D.) Rate-Determining Step
Answers
Answer:
D.) Rate-Determining Step
Explanation:
Rate - Determining Step -
The slowest step of any of the chemical reaction helps to find the overall rate of the chemical reaction , and , hence is known as the rate - determining step .
There are two type of reaction possible , one is elementary reaction and a complex reaction .
Elementary reaction is a single step reaction , and hence , that very step determined the rate of the reaction and hence is known as the rate determining step .
And ,
In case of a complex reaction , the reaction is preceded by many steps , and hence , the slowest step among other steps is known as the rate determining step of the reaction .
A galvanic (voltaic) cell has the generic metals X and Y as electrodes. X is more reactive than Y , that is, X more readily reacts to form a cation than Y does. Classify the descriptions by whether they apply to the X or Y electrode.
(a) anode
(b) cathode
(c) electrons in the wire flow toward
(d) electrons in the wire flow away
(e) cations from salt bridge flow toward
Answers
Answer:
(a) X electrode
(b) Y electrode
(c) Y electrode
(d) X electrode
(e) Y electrode
Explanation:
A galvanic (voltaic) cell has the generic metals X and Y as electrodes. X is more reactive than Y, that is, X more readily reacts to form a cation than Y does.
In the X electrode occurs the oxidation whereas in the Y electrode occurs the reduction.
Oxidation: X(s) → X⁺ⁿ(aq) + n e⁻
Reduction: Y⁺ˣ(aq) + x e⁻ → Y(s)
Classify the descriptions by whether they apply to the X or Y electrode.
(a) anode. Is where the oxidation takes place (X electrode).
(b) cathode. Is where the reduction takes place (Y electrode).
(c) electrons in the wire flow toward. Electrons in the wire flow toward the cathode (Y electrode).
(d) electrons in the wire flow away. Electrons in the wire flow away from the anode (X electrode).
(e) cations from salt bridge flow toward. Cations from the salt bridge flow toward the cathode (Y electrode) to maintain the electroneutrality.
In a galvanic cell, the more reactive metal X is the anode where electrons flow away from, and the less reactive metal Y is the cathode where electrons flow toward. Cations from the salt bridge migrate toward the anode, maintaining electrical neutrality.
Explanation:In a galvanic (voltaic) cell, the generic metal X is more reactive than Y, indicating that X acts as the anode where oxidation takes place, and Y acts as the cathode where reduction occurs. The characteristics of the electrodes in a voltaic cell are as follows:
(a) Anode - X electrode since it is more reactive and readily oxidized.(b) Cathode - Y electrode since it is less reactive and reduction occurs here.(c) Electrons in the wire flow toward the Y electrode (cathode).(d) Electrons in the wire flow away from the X electrode (anode).(e) Cations from the salt bridge flow toward the X electrode (anode) because it is the site of oxidation.These characteristics are essential to the proper functioning of the galvanic cell, ensuring the flow of electrons from the anode to the cathode, and allowing the cell to generate electricity through spontaneous redox reactions.
A chemistry student needs 10.0 mL of acetone for an experiment. By consulting the CRC Handbook of Chemistry and Physics, the student discovers that the density of acetone is 0.790 g cm .
Calculate the mass of acetone the student should weigh out. Be sure your answer has the correct number of significant digits.
Answers
Answer:
The student has to weigh 7.9 ±0.1 grams
Explanation:
Density of acetone : 0.790 g/cm³
If the student has to measure 10.0 mL of acetone, he can weigh an specific mass.
Density of acetone = Mass of acetone / Volume of acetone
cm³ = mL
0.790 g/cm³ = Mass of acetone / 10 cm³
0.790 g/cm³ . 10cm³ = 7.9 g
Final answer:
To find the mass of acetone needed for the experiment, the student multiplies the density of acetone (0.790 g/mL) by the required volume (10.0 mL) to get 7.90 g, considering significant figures.
Explanation:
The student needs to calculate the mass of acetone required for their experiment. Given that the density of acetone is 0.790 g/cm³ (which is equivalent to 0.790 g/mL since 1 cm³ is equal to 1 mL), and the volume needed is 10.0 mL, they can use the formula density = mass/volume to find the mass.
To find the mass, the student should rearrange the formula to mass = density × volume. Using the given values, the calculation is as follows:
mass = 0.790 g/mL × 10.0 mL = 7.90 g
Therefore, the student should weigh out 7.90 g of acetone for their experiment, making sure to use the correct number of significant digits as provided in the question.
Thermal decomposition of a rail car load of limestone to lime and carbon dioxide requires 2.97 x 106 kJ of heat.
Convert this energy to calories.
Once you have the value, determine its log (base 10).
Answers
Answer: a) [tex]68.3\times 10^6cal[/tex]
b) [tex]log_{10}(68.3\times 10^6cal)=7.83[/tex]
Explanation:
Heat is defined as a spontaneous flow of energy from one object to another. It is measured in Joules, calories, kilo Joules etc.
These units of energy are inter convertible.
We are given:
a) Energy absorbed by limestone = [tex]2.97\times 10^6kJ[/tex]
Converting this unit of temperature into [tex]calories[/tex] by using conversion factor:
1 kJ = 239.006 calories
[tex]2.97\times 10^6kJ=\frac{239.006}{1}\times 2.97\times 10^6=68.3\times 10^6cal[/tex]
Thus the energy in calories is [tex]68.3\times 10^6cal[/tex]
b) The value of log base 10 of [tex]68.3\times 10^6cal[/tex] is:
[tex]log_{10}(68.3\times 10^6cal)=7.83[/tex]
Calculate the lattice energy for CaCl2 from the following information: Energy needed to vaporize one mole of Ca(s) is 192kJ. For calcium the first ionization energy is 589.5kJ/mol and the second ionization energy is 1146kJ/mol. The electron affinity of Cl is-348kJ/mol. The bond energy of Cl2 is 242.6kJ/mol of CI-Cl bonds. The standard heat of formation of CaCl2 is -795kJ/mol. (include the sign and your numerical answer, do not include units, do not use scientific notation, and round your answer to 1 decimal point)
Answers
Calculate the total energy for individual process, including energy to vaporize Ca(s), first and second ionization energies of Ca, bond energy of Cl2 and electron affinity of Cl. The lattice energy is the result of subtracting standard heat of formation of CaCl2 from the total energy calculated, which equals to 2635.9 kJ.
Explanation:The lattice energy for CaCl2 can be calculated using the given information and by understanding that the process of forming a salt like CaCl2 involves several different energies. First, there is the energy required to vaporize Ca(s), then the energy for first and second ionization of the calcium atom, followed by the electron affinity for Cl and the bond energy of Cl2.
To start calculating, first add the energy to vaporize Ca(s), the first and second ionization energies for Ca: 192kJ + 589.5kJ + 1146kJ = 1927.5kJ. When 2 Cl react with Ca, this process includes the bond energy for Cl2 and twice the electron energy for Cl: 242.6kJ + 2 * -348kJ = -453.4kJ. To calculate the energy required to form lattice, subtract the standard heat of formation of CaCl2 from the total energy calculated: 1927.5kJ - (-453.4kJ + -795kJ) = 2635.9 kJ
Learn more about Lattice Energy here:https://brainly.com/question/34679410
#SPJ2
A 9.96 mL sample of nitric acid required 13.25 mL of 0.085 M strontium hydroxide for titration. Calculate the molarity of the acid solution. (Hint: It's stoichiometry, you need the balanced equation)
Answers
The molarity of the nitric acid solution can be calculated using the principles of stoichiometry and titration. By knowing the molarity and volume of strontium hydroxide, we can determine the moles of nitric acid due to a 1:1 stoichiometry in the balanced equation. The molarity of nitric acid is found to be 1.13 M.
Explanation:The subject of the question is related to a concept in chemistry known as titration which is used to determine the concentration of an unknown solution (in this case, nitric acid) using a known solution (strontium hydroxide). Given that the volume of nitric acid is 9.96 mL and the volume and molarity of strontium hydroxide are 13.25 mL and 0.085 M respectively, we can determine the molarity of the nitric acid.
The balanced chemical equation for this acid-base reaction is HNO3(aq) + Sr(OH)2(aq) -> Sr(NO3)2(aq) + 2H2O(l). From this, we can see that one molecule of nitric acid reacts with one molecule of strontium hydroxide. Hence, we can apply the principle of stoichiometry and say that the moles of strontium hydroxide used in the titration are equal to the moles of nitric acid present in the solution.
The moles of strontium hydroxide can be calculated as Molarity x Volume (in L), which gives 0.085 mol/L * 13.25 mL = 0.01126 mol. Since the stoichiometry between strontium hydroxide and nitric acid is 1:1, this is also the moles of nitric acid in our sample. The molarity of nitric acid is then calculated as moles of solute/volume of solution in L, providing us with the molarity. Molarity = 0.01126 mol / 0.00996 L = 1.13 M.
Learn more about Stoichiometry and Titration here:https://brainly.com/question/29725887
#SPJ11
Given only the following data, what can be said about the following reaction?
3H2(g) + N2(g)---> 2NH3(g) ΔH=-92kJ
A.) The enthalpy of products is greater than the enthalpy of reactants
B.) The total bond energies of products are greater than the total bond energies of reactants
C.) The reaction is very fast
D.) Nitrogen and Hydrogen are very stable bonds compared to the bonds of ammonia
Answers
Answer:
The correct answer is B the total bond energies of the product is greater than the total bond energies of the reactants.
Explanation:
3H2+N2=2NH3
This reaction is an endothermic reaction that means that reaction consume heat energy.
Due the above reaction is endothermic the enthalpy change of the reaction is negative(-ve).
During endothermic reaction the total bond energies of the product is greater than the total bond energies of the reactants.
A 250 mL container of CO2 exerting a pressure of 1.00 atm is connected through a valve to a 500 mL container of O2 exerting a pressure of 2.00 atm.
When the valve is opened, the gases mix, forming a 750 mL mixture of CO2 and O2.
What is the total pressure of this mixture?
Answers
Explanation:
The given data is as follows.
[tex]P_{1}[/tex] = 1 atm, [tex]P_{2}[/tex] = 2 atm
[tex]V_{1}[/tex] = 250 ml, [tex]V_{2}[/tex] = 500 ml
Total volume = [tex]V_{1} + V_{2}[/tex] = 750 ml
Therefore, total pressure will be as follows.
[tex]P_{total} V_{total} = P_{1}V_{1} + P_{2}V_{2}[/tex]
[tex]P_{total} = \frac{P_{1}V_{1} + P_{2}V_{2}}{V_{total}}[/tex]
= [tex]\frac{1 atm \times 250 ml + 2 atm \times 500 ml}{750 ml}[/tex]
= 1.66 atm
Thus, we can conclude that total pressure of the given mixture is 1.66 atm.
Which pair of samples contains the same number of oxygen atoms in each compound?0.20 mol Ba(OH)2 and 0.20 mol H2SO40.20 mol Br2O and 0.20 mol HBrO0.10 mol Fe2O3 and 0.50 mol BaO0.10 mol Na2O and 0.10 mol Na2SO4
Answers
Answer:
0.20 mol Br2O and 0.20 mol HBrO have the same number of oxygen atoms
Explanation:
0.20 mol Ba(OH)2 and 0.20 mol H2SO4
In Ba(OH)2 there are 2 moles of O atoms in every mol of Ba(OH)2.
Number of O atoms in 0.20 moles Ba(OH)2 = 2*0.20 = 0.40 moles O atom
In H2SO4 there are 4 moles of O atoms for every mol of H2SO4.
Number of O atoms in 0.20 moles H2SO4 = 4*0.20 = 0.80 moles O atom
⇒ 0.20 mol Ba(OH)2 and 0.20 mol H2SO4 do not have the same number of oxygen atoms.
0.20 mol Br2O and 0.20 mol HBrO
In Br2O there is 1 mol of O atoms in every mol Br2O
Number of O atoms in 0.20 moles Br2O = 0.20*1 = 0.20 moles O atom
In HBrO there is 1 mol of O atom in every mol HBrO
Number of O atoms in 0.20 moles HBrO = 0.20 *1 = 0.20 moles O atom
⇒ in 0.20 moles Br2O and 0.20 moles HBrO we have the same number of oxygen atoms
0.20 moles of Oygen contains: = 0.20 * 6.022*10^23 = 1.2 *10^23 O atoms
0.10 mol Fe2O3 and 0.50 mol BaO
In Fe2O3 there are 3 moles of O atoms in every mol of Fe2O3
Number of O atoms in 0.10 moles Fe2O3 = 0.10 * 3 = 0.30 moles O atom
In BaO there is 1 mol of O atoms in every mol BaO
Number of O atoms in 0.50 mol BaO = 1*0.50 = 0.50 moles O atom
⇒ 0.10 mol Fe2O3 and 0.50 mol BaO do not have the same number of oxygen atoms.
0.10 mol Na2O and 0.10 mol Na2SO4
In Na2O there is 1 mol of O atoms in every mol of Na2O
Number of O atoms in 0.10 mol Na2O = 1*0.10 = 0.10 moles O atom
In Na2sO4 there are 4 moles of O atoms in every mol of Na2SO4
Number of O atoms in 0.10 mol Na2SO4 = 4*0.10 = 0.40 moles O atom
⇒ 0.10 mol Na2O and 0.10 mol Na2SO4 do not have the same number of oxygen atoms.
The pair of samples that contains the same number of oxygen atoms in each compound is 0.20 mol H2SO4 and 0.20 mol HBrO.
Explanation:To determine which pair of samples contains the same number of oxygen atoms in each compound, we need to calculate the number of oxygen atoms in each sample.
0.20 mol Ba(OH)2 contains 2 oxygen atoms since each Ba(OH)2 molecule has 2 hydroxide groups, and each hydroxide group has 1 oxygen atom.0.20 mol H2SO4 contains 4 oxygen atoms since each H2SO4 molecule has 4 oxygen atoms.0.20 mol Br2O contains 1 oxygen atom since each Br2O molecule has 1 oxygen atom.0.20 mol HBrO contains 2 oxygen atoms since each HBrO molecule has 2 oxygen atoms.Therefore, the pair of samples that contains the same number of oxygen atoms in each compound is 0.20 mol H2SO4 and 0.20 mol HBrO.
The spectrum of a hydrogen atom contains a total of 26 lines, and that of lithium possess approximately eight times as many. This provides evidence for the quantum mechanical model of the atom due to
larger mass of the lithium atom.
greater number of lithium isotopes.
greater attraction between the electrons and the lithium nucleus.
greater number of occupied sublevels in the lithium atom
Answers
Answer:
greater number of occupied sublevels in the lithium atom
Explanation:
Although Hydrogen has only one electron, the atom has several different energy levels. When the electron transitions from a higher energy level to a lower one, photons are released. The photons absorb light at different wavelengths and colors.then they appear as lines on the spectrum of the hydrogen atom. Lithium has a greater number of occupied sub-levels which means more electrons will transition through the energy levels leading to more lines appearing on its spectrum .
One mole of an ideal gas is compressed isothermally but irreversibly at 130oC from 2.5 bar to 6.5bar in a piston/cylinder device. The work required is 30% greater than the work of reversible, isothermal compression. The heat transferred from the gas during compression flows to a heat reservoir at 25oC. Claculate the entropy changes of the gas, the heat reservoir, and ΔStotal.
Answers
Answer:
Entropy change of gas = -7.944 J/mol*K
Entropy change of the reservoir = 13.96 J/mol*K
Total entropy change = 6.02 J/mol*K
Explanation:
Step 1: Data given
1 mol of ideal gas is compressed isothermally ( = constant temperature)
Temperature : 130 °C
Pressure = 2.6 bar to 6.5 bar
The work required is 30% greater than the work of reversible
The heat transferred from the gas during compression flows to a heat reservoir at 25°C
Step 2: Calculate entropy change for gas
ΔSgas = Cp*ln(T2/T1) - R*ln (P2/P1)
⇒ Since the temperature is constant, T2 = T1 so ln(T2/T1) = 0
ΔSgas = - R*ln (P2/P1)
⇒ with R = gas constant = 8.314
⇒ with P1 = initial pressure = 2.5 barr
⇒ with P2 = final pressure = 6.5 bar
ΔSgas = -8.314 *ln(6.5/2.5)
ΔSgas = -7.944 J/mol*K
Step 3: Calculate reversible work done
Reversible work done = R*T*ln (P2/P1)
Reversible work done = 8.314 * 403.15 * ln (6.5/2.5)
Reversible work done = = 3202. 67 J/mol
Step 4: Actual work done
Actual work done = 1.3 * 3202.67 = 4163.47 J/mol
For isothermal compression:
Q = -W
Q = -4163.47 J/mol
Step 5: Calculate entropy change for reservoir
Entropy change for reservoir ΔSres = -Q/Tres = 4163.47 /298.15
ΔSres = 13.96 J/mol*K
Step 6: Calculate total entropy change
ΔStotal = ΔSgas + ΔSres = -7.944 J/mol*K +13.96 J/mol*K
ΔStotal = 6.02 J/mol*K
The entropy change of the gas is 6.02 J/mol.
How to calculate entropy?Firstly, the entropy change for gas will be:
= 1 × 8.314 × In(2.5/6.5)
= -7.944 J/K
The reversible work done will be:
= 8.314 × 403.15 × In(6.5/2.5)
= 3202.67 J/mol
The actual work done will be:
= 1.3 × 3202.67
= 4163.47 J/mol
The entropy change for reservoir will be:
= -7.944 + 13.96
= 6.02 J/mol
In conclusion, the entropy change is 6.02 J/mol
Learn more about entropy on:
https://brainly.com/question/13971861
A silver nitrate, AgNO3, solution of unknown concentration was discovered in the lab. To determine the concentration of the solution, a concentration cell was set up with the unknown solution in the anode compartment and a 1.0 M AgNO3 solution in the cathode compartment. The cell had a potential (E) of +0.045 V at 25°C. What is the concentration of silver in the unknown solution?
Answers
Final answer:
The concentration of silver in the unknown solution can be determined using the Nernst equation with the given cell potential of +0.045 V. By rearranging and substituting known values into the Nernst equation, we can calculate the unknown silver ion concentration at the anode.
Explanation:
To determine the concentration of silver in the unknown AgNO3 solution using a concentration cell, we can apply the Nernst equation. The reaction in a concentration cell is Ag+ (aq) → Ag+ (aq), which proceeds with a transfer of electrons from one compartment to the other. Since there is a potential difference (E) of +0.045 V, we can calculate the unknown concentration at the anode using the Nernst equation:
E = E°_cell - (RT/nF) ln(Q)
Where:
E is the cell potentialE°_cell is the standard cell potential, which is 0 V in concentration cellsR is the gas constant (8.314 J/(mol·K))T is the temperature in Kelvin (298 K)n is the number of electrons transferred per mole of reaction (1 for silver)F is the Faraday constant (96485 C/mol)Q is the reaction quotient, which is equal to [Ag+] anode / [Ag+] cathodeRearranging the Nernst equation and solving for Q will provide us the ratio of the Ag+ concentration in the anode to that in the cathode. By substituting the measured E value, R, T, n, and F into the Nernst equation and knowing that [Ag+] cathode is 1.0 M, we can solve for the unknown [Ag+] anode concentration. Finally, by taking the anti-logarithm of the result, we can find the concentration of silver in the unknown solution.
Marianne gets dressed and puts on some of her favorite perfume. While applying the perfume, she accidentally gets some in her mouth and notices that it has abitter taste. After getting dressed, she heads to the kitchen to prepare some breakfast. She fills a small bowl with plain yogurt and takes a taste. The yogurt is too sour for her liking, so she adds honey to it for some sweetness. When she is done eating, she washes her bowl with soap and water. The soap is so slippery that she accidentally drops the bowl while cleaning it, causing it to break on the kitchen floor. Frustrated, Marianne sweeps up the broken glass and puts it in the trash, and then heads to work. Which substance displays a characteristic of an acid? A:soap B:yogurt C:perfume D:honey
Answers
Answer:
Yogurt displays characteristics of an acid.
Explanation:
The characteristics of an Acid are as follows:
It has an pH of less than 7It has a sour aftertaste(though one shouldn't try it)It increases the [tex]H^{+}[/tex] concentration of water.It reacts with Metals to liberate Hydrogen Gas.It gives out [tex]H^{+}[/tex] ions in aqueous solution.It turns blue litmus to red.Only Yogurt displays one of these properties ie. sour taste, therefore it is the only material having characteristic of acid.
Bittery taste and slippery touch are characteristics of bases.
Answer:
its c
Explanation: