What about uranium room temperature is it "SOLID LIQUID or GAS)?

Answer:

90 years

Explanation:

it takes three halves of one to get to 1/8.

So 30 times 3 = 90

When CH₄ burns with the presence of O₂, CO₂ and H₂O are formed as the products. The balanced equation is;

CH₄ + 2O₂ → CO₂ + 2H₂O

When the reaction happens, 4 C-H bonds of CH₄ and O=O bond of O₂ are broken down to form 2 C=O bonds in CO₂ and 2 O-H bonds in H₂O.

The broken and formed bonds are marked in the image.

Fluorine atoms have seven valence electrons according to their electron configuration, which is reflected in their belonging to Group 7A of the periodic table and is also depicted in their Lewis dot structure.

According to the given electron structure of fluorine (F=1s22s22p5), fluorine atoms have seven valence electrons. The electron configuration indicates that there are two electrons in the first energy level (1s2) and seven electrons in the second energy level (2s22p5). Since the second energy level is the outermost shell, these seven electrons are considered the valence electrons.

Fluorine belongs to Group 7A in the periodic table, which means it is expected to have seven valence electrons. This is confirmed by the electron configuration. These valence electrons are represented in a Lewis dot structure by placing seven dots around the symbol for fluorine (F).

Answer: d. water vapor and sulfur dioxide?

As per result of studies done on volcanic eruptions, Water vapor (H2O), carbon dioxide (CO2), and sulfur dioxide (SO2) are the most common volcanic gases abundantly emitted in volcanic outgassing. Other gases like carbon monoxide, methane and hydrogen are released in lesser amounts. 

Answer:

water vapor and sulfur dioxide.

2.86 °C = (1) (1.86 °C kg mol-1) (x / 0.750 kg)

2.86 °C = (2.48 °C mol-1) (x)

x = 1.1532 mol

33.7 g / 1.1532 mol = 29.2 g/mol

To find the volume of hydrogen gas produced at STP from the reaction of 78.33g of aluminum with excess water, calculate the moles of aluminum, convert that to moles of hydrogen gas using stoichiometry, and then use the molar volume at STP to find 97.44 liters of hydrogen gas.

To determine the volume of hydrogen produced at STP (Standard Temperature and Pressure) by the reaction of aluminum with excess water, we first need to write the balanced chemical equation for the reaction.

For aluminum reacting with water yielding aluminum hydroxide and hydrogen gas, the balanced equation is:

From this equation, we can see that 2 moles of aluminum produce 3 moles of hydrogen gas. To find the moles of aluminum in 78.33g, we use the molar mass of aluminum (approximately 26.98 g/mol).

Thus, the reaction of 78.33g of aluminum with excess water will produce 97.44 liters of hydrogen gas at STP.

Answer:

Heat is transferred through contact between molecules.

Explanation:

a-p-e-x

Answer: The molarity of solution is 0.67 M

Explanation:

To calculate the molarity of solution, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (in mL)}}[/tex]

We are given:

Mass of solute (KCl) = 5.0 g

Molar mass of potassium chloride = 74.55 g/mol

Volume of solution = 100 mL

Putting values in above equation, we get:

[tex]\text{Molarity of solution}=\frac{5g\times 1000}{74.55g/mol\times 100mL}\\\\\text{Molarity of solution}=0.67M[/tex]

Hence, the molarity of solution is 0.67 M

The most reactive nonmetals are found in the column second from the right side of the periodic table, also known as Group 17 or the halogens. They are highly reactive because they need to gain just one electron to complete their outer electron shell. Fluorine is the most reactive nonmetal.

The most reactive nonmetals are located in the upper right section of the periodic table, in the column that is second from the right side. This column is known as Group 17, or the halogens. Halogens are highly reactive due to their propensity to gain an electron to fill their outer electron shells, and they exhibit rich variety of chemical behaviors.

Elements belonging to the same column or group, such as the halogens, share many chemical characteristics because they have the same number of valence electrons.

https://brainly.com/question/14183621

#SPJ12

Amino acids combine to form complex macromolecules called proteins. Other listed macromolecules - phospholipids, carbohydrates, and polysaccharides - are not made from amino acids.

Amino acids are the building blocks of proteins. They join together in a specific sequence to form these complex macromolecules. In the list provided, the correct answer is 'B. Proteins'. This is because phospholipids, carbohydrates, and polysaccharides are different types of macromolecules constructed from other monomers, not amino acids. The resulting protein structure determines its function in an organism.

https://brainly.com/question/36384706

#SPJ6

Answer : Option C) 5.1

If we consider any weak acid and strong base titration. We usually observe that the pH initially rises quite fast then remains constant during the buffer region before rising rapidly to the end point.

So, if 5 mL of NaOH is considered to be the one third of the way to the endpoint, then after the initial rise which will be more than 3.4 and reaching to the buffer region before rising to the endpoint.

Now, if endpoint has pH of 8.6 a buffer region around 5 is a good but the acid could be acetic acid which has similar pH endpoints with the pKa of 4.74 - so buffer region around 5 will be the good condition.

And hence pH of 5.1 is the most probably the right answer.

5.1 would be the clostest answer

Final answer:

A) Tinfoil, which is made of aluminum, does not decompose as it is not an organic material. Plastic water bottles and milk cartons can take significant time to decompose due to their plastic components, while lumber, being organic, does decompose naturally.

Explanation:

The object that does not decompose among the ones listed is A) Tinfoil. Decomposition is a process that typically involves the breakdown of organic material by microorganisms. Tinfoil, which is made of aluminum, is not an organic material and thus does not decompose in the same way organic substances, like lumber, do. A plastic water bottle can take a very long time to decompose, often hundreds of years, but it can eventually break down, although not as readily as organic materials. A milk carton typically contains both paper, which is organic and degradable, and a plastic lining, which can take a considerable amount of time to decompose. As such, milk cartons often have components that can degrade and others that are very resistant to degradation. On the other hand, lumber, which is wood, will decompose over time as it is an organic material.

Generating a key from bottom to top signifies rearranging data in a particular order, often used in sorting or indexing processes. The actual sequence depends on the set rules, such as alphabetically or numerically.

The correct sequence from bottom to top when generating a key for data, generally implies rearranging the data in a specific order. Let's consider a scenario in which we have data items named A, B, C, and D from bottom to top. In this case, the correct sequence from bottom to top might be D, C, B, A, assuming we're ordering in reverse-alphabetical order. However, the exact sequence can depend on the specific criteria or rules you're using to generate the key.

These keys are often used in computer operations such as sorting and indexing to manage and locate data efficiently. It's always important to understand the specific context in which the key is being applied for an accurate sequence.

https://brainly.com/question/33385922

#SPJ3

The sequence of bases on one strand of DNA can be predicted from the other due to specific base pairing rules, with adenine pairing with thymine, and cytosine with guanine, a principle foundational to DNA replication and repair mechanisms. Option c

The ability to predict the base sequence of one DNA strand when the sequence of the complementary strand is known is due to base pairing rules, which are critical for DNA replication and maintenance. In this specific pairing, adenine (A) always binds to thymine (T), and cytosine (C) always binds to guanine (G).

The bases on one strand form hydrogen bonds with the bases on the opposite strand, leading to a complementary base sequence: whenever there is an 'A' on one strand, there is a 'T' opposite it, and for every 'C' there is a 'G'. This strict pairing, which was elucidated in the Watson-Crick model of DNA, essentially allows one to recreate one strand's sequence from the other.

An example of complementary base pairing would be a DNA strand with the sequence 5'-AATTGGCC-3' having a complementary strand with the sequence 3'-TTAACCGG-5'..

Due to the nature of these interactions, the process of DNA replication involves separating the two strands and using each as a template to create a new complementary strand. This results in two DNA molecules where one strand is original and the other newly synthesized. The redundancy in information encoded by the complementary strands is a crucial aspect of genetic fidelity and repair mechanisms in the cell, ensuring the DNA's integrity over generations.

How does the law of conservation of mass apply  to this reaction: C2H4 + O2 → H2O + CO2?

Blood boils at a temperature close to water's boiling point: 100°C, 373 K, or 212°F. This boiling point slightly varies due to dissolved substances. Understanding these values illustrates the relationship among different temperature scales.

When considering the temperature at which blood boils, it primarily depends on its composition, but generally, it is close to the boiling point of water. The boiling point of water is an important reference and is commonly known for each temperature scale:

Human blood is mostly water, and hence its boiling point is similarly close; however, due to the presence of dissolved proteins, salts, and other substances, the exact boiling point may slightly vary. At normal atmospheric pressure, it is approximately 100°C (373 K or 212°F). This concept is an important illustration of the relationship among the temperature scales.

The final temperature of benzene after adding 2500 J of energy is 41.97°C.

To determine the final temperature of benzene after adding 2500 J of energy, we can use the formula for specific heat capacity:

q = mcΔT

Where:

Rearranging the formula to solve for ΔT:

ΔT = q / (mc)

Substitute the given values:

[tex]\Delta T = \frac{2500 \, \text{J}}{120 \, \text{g} \times 1.74 \, \text{J/g \textdegree C}}\\\\\Delta T = \frac{2500 \, \text{J}}{208.8 \, \text{J/°C}} \approx 11.97 \textdegree C[/tex]

Add this change to the initial temperature of 30°C:

Final temperature = 30°C + 11.97°C = 41.97°C

Therefore, the final temperature of the benzene after adding 2500 J of energy is 41.97°C.