The Bacteria that survives a wide temperature can live through all climatic conditions and in all geographic conditions. They can also live through generations without getting extinct.
Explanation:
Bacteria are small wonder organisms that are present in the universe, they can change their genetic makeup in minutes and get evolved to survive through haphazard situations.
There are some bacteria that can live in extreme high temperatures and one that survives in extreme low temperatures, one that can face drought and the ones that can live in extreme wet condition.
Which best describes the difference between a theory and a hypothesis?
A) A hypothesis can be tested and a theory has already been tested.
B) A theory can be tested and a hypothesis has already been tested.
C) A hypothesis must be testable and theory does not need to be testable.
D) A theory must be testable and hypothesis does not need to be testable.
Answer:
A
Explanation:
A hypothesis is the first stage into becoming a theory. A hypothesis that has already been tested multiple times with the same outcome, becomes a theory.
Answer:
The answer is C
Explanation:
How do enzymes act as catalyst in a chemical reaction ?
Enzymes, which are proteins found within cells, act as catalysts by lowering the activation energy required for a reaction to occur. They bind with specific molecules called substrates in a lock-and-key manner, facilitating their conversion into products. After the products are released, enzymes are free to interact with new substrates.
Explanation:Enzymes are proteins that drastically speed up the rate of virtually all of the chemical reactions that take place within cells. They act as catalysts by providing a different pathway for a reaction to proceed that has a lower activation energy. A key characteristic of enzymes is their specificity; they only bind to certain molecules, called substrates, which fit into the enzyme's active site in a lock-and-key manner.
During the enzyme-catalyzed reaction, the substrate is converted into one or more different molecules, known as products. When the products have been released, the enzyme is ready to bind with a new substrate and repeat the process, hence emphasizing the reusable nature of enzymes.
Learn more about Enzymes as Catalysts here:https://brainly.com/question/3167490
#SPJ6
Why roots need to use different methods to absorb water and ions?
Final answer:
Roots need different methods to absorb water and ions due to their different properties. Water is absorbed through root hairs, while ions are absorbed by thin-walled epidermal cells and root hairs, as well as through a mycorrhizal relationship with fungi.
Explanation:
Roots need to use different methods to absorb water and ions because water and ions have different properties and require different mechanisms for uptake. Roots absorb water through root hairs, which are extensions of root epidermal cells that increase the surface area of the root for efficient water absorption.
Water moves through the permeable cell walls of the root epidermis and diffuses into the root cortex. On the other hand, ions (nutrients) are absorbed by thin-walled epidermal cells, root hairs, and a mycorrhizal relationship with fungi. Root hairs are especially important for nutrient absorption.
Plants need both water and minerals, which they absorb via different methods. Water is absorbed through osmosis, while minerals use active transport requiring energy. These distinct processes are essential due to the differing properties of water and ion absorption.
Plants need both water and minerals to survive. They use different methods to absorb each type of nutrient due to the distinct properties of water and minerals.Absorption Methods:
Water is absorbed through a process called osmosis where it moves from a region of higher concentration (soil) to a region of lower concentration (inside root cells).Minerals or ions are absorbed through active transport, which requires energy because these nutrients often move from a region of lower concentration (soil) to a region of higher concentration (inside root cells).Different methods are necessary because water naturally moves to balance concentration levels via osmosis, while minerals require energy to move against their concentration gradient.what is the most important difference between Prokaryotic and Eukaryotic cells.
Prokaryotic cells lack a nucleus and organelles, while eukaryotic cells have both. This structural difference impacts complexity, specialization, and roles in biological systems.
The most significant distinction between prokaryotic and eukaryotic cells lies in their structural complexity and organization. Prokaryotic cells lack a defined nucleus and membrane-bound organelles, existing as simple, single-celled organisms. Eukaryotic cells, on the other hand, possess a well-defined nucleus enclosed by a nuclear membrane, alongside various membrane-bound organelles like mitochondria, endoplasmic reticulum, and Golgi apparatus.
This complexity enables eukaryotic cells to compartmentalize functions and facilitate specialized processes. Additionally, eukaryotes are typically larger and more intricate than prokaryotes. This differentiation in cellular structure underscores the fundamental diversity between these two cell types and reflects their distinct roles in various biological systems.
To learn more about prokaryotic follow the link:
https://brainly.com/question/29119623
#SPJ3
What is definition of law
Answer:
Answer in explanation
Explanation:
the system of rules which a particular country or community recognizes as regulating the actions of its members and which it may enforce by the imposition of penalties.
What are the main functions of DNA polymerase?
DNA polymerases are critical for DNA replication, ensuring the synthesis of new DNA strands, proofreading to correct errors, and exhibiting high processivity. They also have specialized functions such as removing RNA primers and initiating DNA replication.
DNA polymerases are essential enzymes in the process of DNA replication, performing several critical functions to ensure the accuracy and completeness of DNA synthesis.
Main Functions of DNA Polymerase
DNA synthesis: DNA polymerase catalyzes the incorporation of deoxynucleotides into a growing DNA strand, following the template DNA strand to create a new complementary strand.Proofreading: To maintain high fidelity during DNA replication, DNA polymerase possesses proofreading activity, using its 3' to 5' exonuclease function to correct errors by removing mispaired nucleotides.Processivity: The enzyme’s ability to rapidly synthesize long strands of DNA without frequently dissociating from the DNA template is termed processivity, which is crucial for efficient replication.Specific DNA polymerases also have unique roles, such as the removal of RNA primers by DNA polymerase I, whereas DNA polymerase III is the main functional polymerase at the replication fork in E. coli. In eukaryotes, like humans, DNA polymerases δ and ε perform the majority of replicative functions, with DNA polymerase α initiating replication.
Which pair of structures would provide a positive identification of a plant cell under a microscope?
(a)ribosomes, chloroplasts
(b)cell wall, chloroplast
(c)plasma membrane, large central vacuole
(d)cell wall, mitochondria
Answer:
The correct option is Option B i.e. cell walls and chloroplasts.
Explanation:
1. The plant cells differ with the animal cells with respect to some points.
2. Firstly, the presence of cell walls are exclusive for plants and totally absent in animals.
3. Secondly, the presence of chloroplasts or plastids is exclusive for plants.
4. Thirdly, vacuoles are huge in plant cells, but smaller in animals. They give extra support to each cells for standing, and also to store several excretory products.
The pair of structures that would provide positive identification of a plant cell under a microscope are cell wall and chloroplast (Option b).
Plant cells have a cell wall mainly composed of a complex carbohydrate called cellulose.
This structure (cell wall) provides structural support to plant cells.
Moreover, plant cells also have an organelle known as chloroplast, which serves to synthesize simple carbohydrates (sugars) by a process known as photosynthesis.
In conclusion, the pair of structures that would provide positive identification of a plant cell under a microscope are cell wall and chloroplast (Option b).
Learn more in:
https://brainly.com/question/11136550?referrer=searchResults
Which cell component functions like the bones and muscles in the human body?
cytoskeleton
chloroplasts
cytoplasm
ribosomes
Cytoskeleton - I mean, it literally has the word *Skeleton* in the name.
You set up 5 samples that contained a range of sucrase concentrations but the same amount of
substrate (sucrose)
- The pH was kept constant in all tubes by using the same amount of buffer
- The temperature was kept constant in all tubes (room temp)
- A negative control was used (without the substrate sucrose) to prove that this reaction is due to enzyme activity. It is important
to establish this, because sucrose can break down on its own to yield glucose and fructose but this reaction would take much
longer without enzyme
- There was no quantitative data, but a color key was used to distinguish between maximum, medium and low enzyme activity
- By graphing the qualitative data, you observed that the reaction increases as the enzyme concentration is increased. This
means, the more enzyme, the more sucrose can be broken down, the more products can be formed.
- However this effect can be observed up to a limit.
As stated, the results as evidenced in the experiment can only be observed up to a limit. Why?
A buildup of sugars alters the pH of the environment
The products, glucose and fructose, denature the sucrase
You eventually run out of sucrose to act as the substrate
The reaction causes a change in temperature, that denatures the sucrase.
Eliminate
Answer:
You eventually run out of sucrose to act as the substrate.
Explanation:
You must have both substrate and an enzyme for the reaction to continue.
Enzyme activity increases with the concentration of sucrase up to a point. This limit is due to the finite amount of sucrose in the system. Once all sucrose is utilized, the reaction stops regardless of enzyme concentration.
Explanation:The results of the experiment you conducted can only be observed up to a limit due to the fact that there is a finite amount of substrate (in this case, sucrose) available in the system. The enzyme sucrase functions by breaking down the substrate sucrose into glucose and fructose. As the concentration of sucrase increases, more sucrose can be broken down at a faster rate, which increases the reaction speed. However, once all the sucrose has been utilized, the reaction will stop regardless of the enzyme concentration as there is no more substrate for the enzyme sucrase to act upon. Hence, the increase in enzyme activity is observed only up to a certain limit.
Learn more about Biochemical Reactions here:https://brainly.com/question/11582799
#SPJ3
Select all that apply.
Cyanobacteria _____.
serve as a food source for other organisms
are used for medicinal purposes
produce oxygen
perform nitrogen fixation
cause disease
Answer: all the answer applies
Explanation: Because of the composition rich in protein they are as food source for other organisms such as zooplankton, insects and snails.
they are used for medicinal purposes because have been identified as a rich source of biologically active compounds with antiviral, antibacterial, anti-fungal and anticancer activities, the compounds is polyhydroxyalkanoates.
the Cyanobacterias produce oxygen though the photosynthesis.
the Cyanobacterias cause disease because of theirs toxins
Answer:
Cyanobacteria performs all the function that given in the Question.
Explanation:
Cyanobacteria serve as a food for other organism, They are photosynthetic bacteria. Cyanobacteria and plants are capable of using light energy which trapped by the chlorophyll to convert carbon dioxide and water into oxygen and its food as a glucose, this process is called photosynthesis.
Cyanobacteria are used for medical purpose because they have rich source of biologically active compound with antibacterial, antifungal, antiviral activities.
Cyanobacteria produce oxygen because they oxygenic photosynthetic bacteria. They trap sun's energy absorbs carbon dioxide and emit oxygen.
Cyanobacteria performs nitrogen fixation because they contain additional fixed nitrogen which absorbs by the plants from their roots. Nitrification cannot occurs in the presence of oxygen. So, nitrogen is fixed iin the specialised cells called heterocysts.
In an investigation of the cycling of environmental gases, a
student placed water and bromthymol blue in each of four test
tubes as shown in the diagrams below. No additional items were
placed in tube 1, a snail was placed in tube 2, an aquatic plant
(elodea) was placed in tube 3, and both a snail and an elodea
were placed in tube 4. The tubes were then stoppered and placed
in bright light for 24 hours.
Tube 1 Tube 2 Tube 3 Tube 4
How would the solution in tube 3 change after 24 hours?
A) It would change from yellow to blue.
B) It would change from blue to brick red.
C) It would contain more oxygen.
D) It would contain less nitrogen.
Answer:
D) It would contain less nitrogen.
Explanation:
In an investigation of the cycling of environmental gases, a student placed water and bromthymol blue in each of four test tubes as shown in the diagrams below. No additional items were placed in tube 1, a snail was placed in tube 2, an aquatic plant (elodea) was placed in tube 3, and both a snail and an elodea were placed in tube 4. The tubes were then stoppered and placed in bright light for 24 hours. The solution in tube 3 changes after 24 hours because it would contain less nitrogen.
The dfferent tubes are shown in the picture that I uploaded.
The solution in tube 3 would likely change from yellow to blue, indicating it would contain more oxygen after 24 hours in bright light, due to the process of photosynthesis performed by the elodea plant.
C is correct
Explanation:When considering the change that would occur in tube 3 containing water, bromthymol blue, and an aquatic plant (elodea) after 24 hours in bright light, we must take into account the process of photosynthesis. The presence of the aquatic plant will lead to the consumption of carbon dioxide and the production of oxygen.
Since bromthymol blue is an indicator that turns yellow in the presence of an acid (like carbonic acid formed when CO2 dissolves in water) and blue in the presence of a base (fewer hydrogen ions present when CO2 is consumed), the expected change should be: It would contain more oxygen (answer choice C), implying more CO2 will be consumed and less carbonic acid will be present.
This means the solution in tube 3 would likely change from yellow to blue over time (answer choice A). However, the question specifically asks about the change in gas concentration, thus 'it would contain more oxygen' is the most accurate description of the expected change due to the activity of the elodea performing photosynthesis.
Learn more about Photosynthesis here:https://brainly.com/question/29764662
#SPJ3
A food business such as a restaurant must be certain to purchase their food products from a _______ source.
Answer:
Reputed
Explanation:
A food source is reputed because it sells original food products and also that is not stale.
In a restaurant, if the food products should be purchased from a reputed source as it will ensure that the items are not stale and also the customers will be happy to know that the food that is being served to them is not made of rotten items and also collected from a renowned source. Thus, the purchase also increases.
9. This part of Burt's brain helps him produce language?
Which part of an investigation is only found in an experimental investigation? a hypothesis a control group a procedure a conclusion
Answer:
The control group
Explanation:
The control group can be described as the group, which is being used to test any hypothesis or experiment, in which there are no changes made by a researcher. It serves as a platform to compare the other groups and the changes occurring in them. All the results from an experiment are deduced by comparing the changes from the control group. Thus, every experiment investigation has a control group.
Answer:
control group
Explanation:
63. A student wanted to determine if slugs preferred green leaf lettuce
leaves over purple cabbage leaves for food. Pieces of both leaves
were cut. One piece of each type of leaf and one slug were placed in
each often containers. After three days, the surface area of each leaf
section was measured and the results were recorded in a data table.
State one reason that the results of this experiment might be considered
Invalid.
The result might be considered invalid because:-
The time interval was not recorded when the slugs were placed.An experiment should be performed various time to consider a result. What to do while performing an experiment?Ask a question based on observation. Make observations. Refine hypothesis. Select a specific variable to test.Pick a control group.Conduct tests.Continue tests.To know more about hypothesis here
https://brainly.com/question/17173491
#SPJ2
which of the following is the best example of homeostasis in the human body? and why?
Answer:
Basically, the tendency to maintain a stable, relatively constant internal environment is called homeostasis. The body maintains homeostasis for many factors in addition to temperature. For instance, the concentration of various ions in your blood must be kept steady, along with pH and the concentration of glucose.
Explanation:
Where do most human inputs of outdoor air pollutants occur?
in the mountains
around oceans
in deserts
in urban areas
Answer:in urban areas let me know if i was right or wrong
Explanation:
Answer:
in urban areas is the correct answer.
Explanation:
most human inputs of outdoor air pollutants occur in the urban areas.
its occur in the urban areas because of the following reasons
In the urban areas, people are more depended on cars, vehicles and chemicals industries that are there which give rise to outdoor air pollutants.burning of fossil fuels in the power factory, in a machine vehicle and the industrial plants, generate large outdoor pollutants in the urban areas.what are the main functions of polysacchrides in plants
Answer:
protein and energy
Explanation:
if you look close at the wall of a plant it has cellulose and hemicellulose.
Answer:
Explanation:
It is stored in the carbon atoms
3. Which is true about a valid scientific hypothesis?
a. It is the same as a scientific theory.
b. It is a testable statement.
c. It can be scientifically proved to be true.
d. It is never rejected.
Answer:
The answer Is B.
Explanation:
A hypothesis is a suggested solution for an unexplained occurrence that does not fit into current accepted scientific theory. ... For a hypothesis to be termed a scientific hypothesis, it has to be something that can be supported or refuted through carefully crafted experimentation or observation.
Photosynthesis has two main parts (light-independent and light dependent). Which descriptions can BEST be used to explain photosystem I and photosystem II? I. Light-independent reaction II. Light-dependent reaction III. Products are ATP and NADPH. IV. Occurs in the thylakoid membranes V. Occurs in the stroma VI. Photolysis of water occurs during this stage. A) I, V, and VI B) I, IV, V, and VI C) I, II, III, and V D) II, III, IV, and VI
Answer:
D
Explanation:
In photosystems, the reactive center gives of an electrons that are conveyed along a chain of pigments that harness the energy of the electrons to pump H+ ions from the stroma into the thylakoid – hence creating a proton motive force that will be used to generate ATPs by ATP synthase enzyme. Eventually the electrons are passed to NADP+ that is reduced to NADPH (2 electrons per molecule). The photolysis of a water molecule by sunlight gives H+ and O- and 2 free electrons used to replace the lost electrons in the photosystems reactive center. This whole process is referred to as photophosphorylation.
Answer:
Option D explain the photo system I
Explanation:
In a light independent reaction, light energy from sun is essential to carry out photosynthesis and produce energy molecules such as ATP and NADH. These reactions take place within the thylakoid membrane of chloroplasts. When the sunlight from the sun is taken by the green leaves of the plant it is initially used to break down the water molecules that releases free electron
Hence, option D is correct
Anna heated 15 g of Substance A to obtain 5 g of substance B, 4 g of Substance C, and a certain amount of Substance D, which statement is correct
A) the mass of substance D was 10g less than the mass of substance A
B) the mass of substance D was 1 g greater than the mass of substance B
C) the mass of substance A was equal to the total mass of substance C and substance D
D) the mass of substance A was equal the the total mass of substance B and substance D
Answer:
I think its B
Explanation:
HELP!! dihybrid crosses
Answer:
Predicting the genotype of offspring . Determine all possible combinations of alleles in the gametes for each parent. Half of the gametes get a dominant S and a dominant Y allele; the other half of the gametes get a recessive s and a recessive y allele. Both parents produce 25% each of SY, Sy, sY, and sy.
Explanation:
This is an example of how you complete the problem. I hope this helps! :)
A dihybrid cross is a breeding experiment that shows how two distinct traits are passed from parents to offspring. It's done using a Punnett square to determine the probability of offspring combinations.
Explanation:A dihybrid cross is a breeding experiment that involves parents that differ in two distinct, genetically determined traits. In the study of genetics, The aim of a dihybrid cross is to determine the likelihood of offspring inheriting combinations of traits from their parents.
For instance, let's consider an example of crossing two pea plants. One possesses the traits for being tall with yellow seeds (TTYY) and the other being short with green seeds (ttyy). We can observe a dihybrid cross to predict the progeny's traits.
To do so, a Punnett square is used to visualize all the potential combinations of gametes resulting from meiosis. Later, these combinations can be analyzed to find out the probability of an offspring manifesting a certain combination of traits.
In short, dihybrid crosses provide a systematic method to study how traits are passed on to offspring generation. Its findings are fundamental to understanding the principles of genetics.
Learn more about Dihybrid Crosses here:https://brainly.com/question/27675873
#SPJ6
2. How does the structure of an enzyme affect its function?
Explanation:
Enzymes. Most enzymes are proteins and therefore their function is specific to their structure. ... The enzyme binds with the appropriate substrate only in the correct alignment and orientation to connect the molecules. The resulting enzyme-substrate complex enables the reaction to occur.
PLZ HELP ME I NEED IT CAUSE I SUCK AT SCI!!! After a town is abandoned, the concrete parking lots remain empty and inactive for hundreds of years. What is the most likely order of ecological succession in that area?
A.grass → trees → lichens → moss
B.lichens → grass → shrubs → trees
C.lichens → grass → trees → shrubs
D.shrubs → grass → trees → lichens
Answer: B
Explanation:
Would be last, wouldn’t they? That would make the most sense to me.
Answer:
Option (B).
Explanation:
Succession may be defined as the change in the ecological community of the species with respect to time. Two main types of succession are primary succession and secondary succession.
The living things that accumulate in the succession is from the simple organism to the complex organism. First lichens will evade in the land. After lichens grass then shrubs and finally the trees will cover the area and convert into the forest.
Thus, the correct answer is option (B).
Very long and large organic molecules called
Answer:
Macromolecules.
Explanation:
Molecules may be defined as the substance that are made up of the same or different molecules. Two main type of molecules on the basis of their structure and weight are macromolecules.
Macromolecules are made of the large number of subunits. They have large molecular weight and formed generally by the process of polymerisation. Organic macromolecules are carbohydrates, proteins and nucleic acid. Large number of atoms are involve in the formation of macromolecule.
Thus, the answer is macromolecules.
What hands-on training program is required for doctors?
Answer:
Family medicine residency programs accredited by the Accreditation Council for Graduate Medical Education (ACGME) require three years of training. As with other specialties, family medicine residency programs have specific requirements with certain numbers of hours that must be completed for board certification.
HOPE THIS HELPED!!!!!!!!!!!!!!! XDDDDDDDDDDDD
Doctors require hands-on training programs like clinical rotations, internships, and residencies to gain practical experience before practicing independently.
Hands-on training programs required for doctors typically include clinical rotations during medical school, internships, and residencies. During these programs, doctors gain practical experience working with patients under the supervision of experienced professionals. For example, after graduating from medical school, doctors in the United States must complete a residency program in their chosen speciality to become fully licensed.
Elements are pure substances made up of _____.
Elements are pure substances comprises atoms.
Explanation:An element is a substance that can't be separated into some other substance. Each element is comprised of its own kind of atom. This is the reason the chemical elements are for the most part mere different from one another.
The periodic table records all the discovered elements, gathering those with the same properties. The elements includes metals, non-metals, and metalloids. Most elements are metals, which conduct electricity and are shiny in nature. Metals incorporate iron, gold, and aluminum which are solid at room temperature.
What are four functions of cell division?
Answer:
(1) the reproduction of an entire unicellular organism,
(2) the growth and repair of tissues in multicellular animals,
(3) the formation of gametes (eggs and sperm) for sexual reproduction in multicellular animals.
Explanation:
When you are exposed to sunlight for a long time, your skin, which otherwise appears normal, gets heavily tanned. What could be the reason?
Answer:
Our skin gets tanned by getting exposed to sunlight due to the production of melanin as a protective measure.
Explanation:
Electromagnetic waves like infrared waves and UV rays are present in sunlight. While infrared rays maintain the earth’s atmospheric heat UV rays doesn’t prove to be helpful. UV rays that penetrate the skin damages the DNA and RNA .
The body has developed a fighting mechanism to tackle this problem. That method is the production of melanin, which is the colouring pigment in human skin. The melanin reduces the penetration of UV rays into the skin.
Mammals do not produce digestive enzyme B. However, sheep and cattle are two types of mammals that contain microorganisms in their digestive tract that produce enzyme B.
Which of the following best describes the process that adds a monosaccharide to an existing polysaccharide?
The monosaccharide is completely broken down by a specific enzyme and then the atoms are reorganized and made into a polysaccharide.
A
Ionic bonds are formed between adjacent carbon atoms of the monosaccharide and the polysaccharide by adding water (H2O) and a specific enzyme.
B
A specific enzyme removes the hydrogen (H) from the monosaccharide and the hydroxide (OH) from the polysaccharide, creating a bond between the two and creating a water (H2O) molecule.
C
A specific enzyme removes two hydroxides (OH) , one from the monosaccharide, and one from the polysaccharide, creating a bond between the two monosaccharides and creating a hydrogen peroxide ( H2O2 ) molecule.
D
Answer:
The correct option is this: A specific enzyme removes the hydrogen from the monosaccharide and the hydroxide from the polysaccharide, creating a bond between the two and creating a water molecule.
Explanation:
The process by which a monosaccharide molecule is added to an existing polysaccharide in biological systems is called CONDENSATION POLYMERIZATION.
During the process of condensation, an hydrogen atom and an hydroxide molecule from the reactants come together to form a water molecule; this leads to the formation of covalent bond between the reactants.
Condensation reaction is used in living organisms to produce complex macro molecules such as carbohydrates, proteins and lipids, which are needed by the body for health growth.
Remember, condensation reaction always results in loss of water molecules and formation of more complex molecule. One example of monosaccharide is glucose while cellulose (found in plants) and starch (found in animals) are examples of polysaccharides.
Answer:
B
Explanation:
This is called a dehydration reaction because water is released in the reaction for every glycosidic bond formed between two monomers. On one end of the polysaccharide, is an available 4’ carbon a --OH and an --H. This end of the polysaccharide will bond with the 1’ carbon of the monomer to form a glycosidic bond. The 1' carbon of the monomer will lose its --H while the 4’ carbon at the end of the polymer will lose an --OH. This releases a water molecule (--H + --OH --> H₂O) which is why the process is called a dehydration reaction.