The density of a gas containing carbon and oxygen at stp is 1.25g/l. what is the molar mass of this gas? what is its identity?
If 0.98 moles of BaCl2 are dissolved in enough water to make a 1.2-liter solution, what is the resulting molarity?
A. 0.55 M BaCl2
B. 0.82 M BaCl2
C. 1.2 M BaCl2
D. 0.45 M BaCl2
Which of the following are observations?
- The candle floats.
- The tires are flat.
- The dog is barking.
- The tire is flat because of a decrease in temperature.
- If a person walks by, then the dog will bark.
Which would you expect to experience a greater effective nuclear charge? which would you expect to experience a greater effective nuclear charge? a 2p electron of an atom a 3s electron of a na atom?
Answer:
A 2p electron of a Ne atom
Explanation:
Mastering chemistry
How many grams are in 1.68 x 1026 molecules of CO2? (molar mass=44.01 g/mol) (Hint: You will need to use your entire stoichiometry flow chart)
Answer:
There is [tex]12277.494g[/tex] of CO2
Explanation:
We know that the molar mass of CO2 is [tex]44.01\frac{g}{mol}[/tex]
This means that in 1 mole of molecules of CO2 is 44.01 g of CO2
In one mole of molecules of any substance there are N molecules where N is defined as the Avogadro number.
[tex]N=AvogadroNumber=(6.02214076).10^{23}[/tex]
Therefore, we can write that
In [tex](6.02214076).10^{23}[/tex] molecules of CO2 (1 mole of CO2) there is 44.01 g of CO2 ⇒
In [tex](1.68).10^{26}[/tex] molecules of CO2 there will be x grams :
[tex]x=\frac{(44.01).(1.68).10^{26}}{(6.02214076).10^{23}}g=12277.494g[/tex]
We answer that in [tex](1.68).10^{26}[/tex] molecules of CO2 there is [tex]12277.494g[/tex] of CO2
If you eat 3.00 moles of sugar, how many molecules did you consume?
3.00
2.00 x 10^23 molecules
5.00 x 10^ -24 molecules
1.81 x 10^24 molecules
14 POINTS
SUPER EASY
Hydrochloric acid (HCl) is created by a chemical reaction between hydrogen (H) and chlorine (Cl). Which substance is the product of this reaction?
hydrogen
chlorine
hydrochloric acid
Answer:
The product of this reaction is the hydrochloric acid
Explanation:
The compounds required to perform a reaction are the reactants, in this case there are two: hydrogen and chlorine.
The resultant compound is denominated the product. In this case, the hydrochloric acid.
The reaction is:
[tex]Cl_2 + H_2 \longrightarrow 2 HCl[/tex]
What is the oxidation state of each element in the species Mn(ClO4)3? I'm going over oxi-redox reactions from a long time ago and I'm trying to remember properly.
Mn=3+
Cl=7+
and oxygen=2- right?
What are geometric isomers?
A. compounds that have the same types of atoms arranged in different orders
B. compounds that have the same number of carbon atoms arranged in different orders
C. compounds that have the same atoms arranged in the same order, but with different three-dimensional orientations
D. compounds that have the same atoms arranged in the same order, and have the same three-dimensional orientations
Geometric isomers are compounds with the same atomic and bond composition but different spatial arrangements of the component atoms.
Geometric isomersThey are chemical compounds with the same chemical formula, the same atom/number of atoms with their respective bonds, but different arrangements of the atoms in space.
In other words, they are compounds with the same formula but different geometry of atoms.
When identical ligands are placed in the adjacent positions in geometric isomers, cis is used. When the ligands are in opposite positions, trans is used.
More on geometric isomers can be found here: https://brainly.com/question/13422357
#SPJ5
How many neutrons are in an atom of tin? Round your answer to the nearest whole number.
Answer: 69
Explanation:
As we know that the formula to find the no of neutrons= Atomic mass (A)- atomic number (Z)
No of neutrons (n)=A-Z
n=1189-50
n=69
Passing an electric current through a sample of water (H2O) can cause the water to decompose into hydrogen gas (H2) and oxygen gas (O2) according to the following equation. 2H2O mc026-1.jpg 2H2 + O2 The molar mass of H2O is 18.01 g/mol. The molar mass of O2 is 32.00 g/mol. What mass of H2O, in grams, must react to produce 50.00 g of O2? 14.07 23.05 28.14 56.28
The correct answer is D: 56.31 grams
Explanation: Got 90% on the quiz on edge and got this answer right
The name of the commonly used hardness scale is: specific gravity organic Mohs inorganic
Answer:
The Mohs Hardness Scale is by far the most commonly used hardness scale.
Explanation:
Tapeworms attach themselves inside the intestines of a pig. the worms then eat the pig's partially digested food. the pig is deprived of nutrients. which type of relationship does this represent?
a. commensalism
b. mutualism
c. competition
d. parasitism
The answer to this question is parasitism.
which observation would be best evidence of carbon cycling?
A.) water droplets
B.)moving animals
C.)plant growth
D.) dead plants
Answer: C.)plant growth
Explanation:
The carbon cycling is a process in which the carbon and it's various organic forms are transformed and delivered to various earth spheres such as biosphere, geospheres, hydrospheres, pedospheres and atmosphere. Carbon is the basic element found in all life forms. The cycling of carbon can best be observed in the plant growth. This is because of the fact that carbon is obtained by the plants in the form of carbon dioxide which is a chief ingredient required for the process of photosynthesis. Photosynthesis is necessary for the plants to produce food in the form of carbohydrates required for the growth and metabolism in plants.
How many moles of sodium chloride (NaCl) solute are in 155 grams of an 88.5 percent by mass solution?
How many electrons does the predictable (most common) ion of calcium contain?
Which has the lighter mass one mole of platinum or one mole of zirconium?
How many grams of nickel (+2) are required to replace all of the silver when 15.55 grams of AgNO3 are present?
2AgNO3 + Ni2+ = Ni(NO3)2 + 2Ag+
From the reaction, it can be seen that AgNO3 and Ni2+ has following amount of substance relationshep:
n(AgNO3):n(Ni)=2:1
From the relationshep we can determinate requred moles of Ni2+:
n(AgNO3)=m/M= 15.5/169.87=0.09 moles
So, n (Ni)=n(AgNO3)/2=0.045 moles
Finaly needed mass of Ni2+ is:
m(Ni2+)=nxM=0,045x58.7=2.64g
In the balanced redox reaction: 2 cu(s) + s(s) ® cu2s(s), how many electrons are gained or lost by each copper atom? select one:
a. each copper atom gains two (2) electrons.
b. each copper atom gains one (1) electron.
c. each copper atom loses one (1) electron.
d. each copper atom loses two (2) electrons.
Answer: Option (c) is the correct answer.
Explanation:
The given reaction equation is as follows.
[tex]2Cu(s) + S(s) \rightarrow Cu_{2}S(s)[/tex]
The oxidation-reduction half reactions will be as follows.
Oxidation : [tex]Cu(s) \rightarrow Cu^{+} + 1e^{-}[/tex]
Reduction: [tex]S(s) + 2e^{-} \rightarrow S^{2-} [/tex]
By balancing the above half reactions, oxidation-half reaction will be as follows.
[tex]2Cu(s) \rightarrow 2Cu^{+} + 2e^{-}[/tex]
Whereas reduction-half reaction will remain the same.
Hence, it shows that each copper atom is losing one electron to combine with a sulfur atom.
Therefore, we can conclude that each copper atom loses one (1) electron.
A jet engine might use _____.
slow combustion
rapid combustion
respiration
nitrous oxide
Object A has a length of 3 cm, a width of 2 cm, and a height of 4 cm. Object B is dropped into a graduated cylinder. It displaces 19 mL of water. The volume of object A is: A. greater than the volume of object B B. less than the volume of object B C. equal to the volume of object B
Answer:
greater than the volume of object B
Explanation:
Soda is acidic, I need to know what kind of acid soda includes..
My options are:
1. Sulfuric acid - found in batteries and acid rain.
2. Acetic acid - found in vinegar.
3. Citric acid - found in citrus fruits like lemons and limes.
4. Hydrochloric acid - found in stomach acid and many industrial applications.
Please help it’d mean a lot! <3
Calculate the molality of a 27.0% (by mass) aqueous solution of nitric acid.
To calculate the molality of the aqueous solution of nitric acid, you first convert the mass of nitric acid to moles, then divide by the mass of water in kilograms. This gives a resulting molality of 5.86 mol/kg.
Explanation:The molality of a solution is calculated through the number of moles of solute per kilogram of solvent. To calculate the molality of a 27.0% (by mass) aqueous solution of nitric acid, we first need to determine the number of moles of Nitric acid and the mass of the water. Since the given information is in percantage by mass, we can assume a solution weight of 100g, therefore we have 27g of Nitric Acid and 73g(0.073 kg) of Water.
Step 1: Convert 27g of Nitric Acid to moles. Nitric Acid(HNO3) has a molar mass of about 63.01 g/mol, so that 27g/63.01 g/mol=0.428 mol of HNO3
Step 2: Calculate the molality using the formula molality=n(solute)/m(solvent in kg). So, our molality = 0.428 mol/0.073 kg = 5.86 mol/kg or simply 5.86m.
Learn more about Molality here:https://brainly.com/question/26921570
#SPJ11
To calculate the molality of a 27.0% nitric acid solution, determine the masses of solute and solvent, calculate the moles of [tex]HNO_3[/tex], convert the mass of the solvent to kilograms, and use the molality formula. The molality of this solution is 5.87 m.
Calculate the molality of a 27.0% (by mass) aqueous solution of nitric acid.
To calculate the molality of a 27.0% [tex]HNO_3[/tex]aqueous solution:
Determine the mass of solute ([tex]HNO_3[/tex]) and solvent (water). For a 100 g solution:
Mass of [tex]HNO_3[/tex]= 27.0 gMass of water = 100 g - 27.0 g = 73.0 gCalculate the moles of [tex]HNO_3[/tex]. Molar mass of [tex]HNO_3[/tex]= 1.01 g/mol (H) + 14.01 g/mol (N) + 3 x 16.00 g/mol (O) = 63.01 g/mol
Moles of HNO3 = 27.0 g / 63.01 g/mol = 0.4285 mol
Convert the mass of water to kilograms. Mass of water = 73.0 g = 0.073 kg
Calculate the molality. Molality (m) = moles of solute / mass of solvent in kg
Molality = 0.4285 mol / 0.073 kg = 5.87 m
The molality of the 27.0% aqueous solution of nitric acid is 5.87 m.
What is the total number of neutrons in an atom of 0-18?
Answer: The number of neutrons in given isotope are 10
Explanation:
Atomic number is defined as the number of protons or electrons that are present in a neutral atom.
Atomic number = number of protons = number of electrons
Mass number is defined as the sum of number of protons and neutrons that are present in an atom.
Mass number = Number of protons + Number of neutrons
The isotopic representation of an atom is: [tex]_Z^A\textrm{X}[/tex]
where,
Z = Atomic number of the atom
A = Mass number of the atom
X = Symbol of the atom
We are given:
An isotope having formula: [tex]_{8}^{18}\textrm{O}[/tex]
Atomic number = Number of protons = 8
Mass number = 18
Number of neutrons = 18 - 8 = 10
Hence, the number of neutrons in given isotope are 10
Onversion of 1 mol of acetyl-coa to 2 mol of co_2 and coa via the citric acid cycle results in the net production of
Which statement describes the Arrhenius interpretation of acids and bases
Answer:
It is limited to situations that involve aqueous solutions or specific compounds.
Explanation:
the answer was correct on edge
What is the relationship between a compound and the elements it is made from? (4 points)
The compound takes on a mixture of properties from the elements.
The compound takes on the properties of the stronger element.
The compound may have properties that are very different from those of the elements.
The compound may have the properties of the most abundant element in the compound.
Answer:
The compound may have properties that are very different from those of the elements.
Explanation:
For example - common salt, sodium chloride ( NaCl) has very different properties from sodium and chlorine
Which of the following is not an example of a scientific model?
A system at equilibrium is placed under stress by adding more reactant. If this reaction has a small equilibrium constant (Keq), how will the addition of this stress affect the equilibrium of this system.
Question options:
The equilibrium will shift to produce more reactant.
The equilibrium will shift to produce more product.
There is no way to predict how the stress will affect this system without more information.
The reaction will generate more heat.
In which situation would you expect to have the greatest speed assuming all molucules are eaqual?
A- A 20 Liter container that has 5000 molucules
B- A 20 Liter container that has 1000 molucules
C- A 10 Liter container that has 5000 molucules
D- A 10 Liter container that has 1000 molucules