Answer:
72.25 g
Explanation:
mass of 1.7 L water = 1.7 x 10⁻³ x 10³ kg
= 1.7 kg
heat required to raise its temperature from 25 degree to 100 degree
= mass x specific heat x rise in temperature
= 1.7 x 4.18 x 10³ x 75 J
= 532.95 kJ
Now calorific value of LP gas = 46.1 x 10⁶J / kg
Let required mass of LP gas be m kg
heat evolved from this amount of gas
= 46.1 x 10⁶ m
Heat utilized in warming water
= 46.1 x 10⁶ m x .16 J
So
46.1 x 10⁶ m x .16 = 532.95 x 10³
7376 x 10³ m = 532.95 x 10³
m = 532.95 / 7376 kg
= 72.25 g
In order to heat 1.7 L of water from room temperature to boiling, approximately 66.7 kg of LP gas, assuming that during heating only 16% of the heat emitted by LP gas combustion goes to heat the water, would be required.
Explanation:To calculate the mass of LP gas needed to heat the water, we firstly need to determine the amount of energy required to heat the water from room temperature to the boiling point. This can be determined using the formula for heat Q=m*c* ΔT, where m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature. Considering water's specific heat capacity is 4.184 J/g °C and the change in temperature is 75 °C, the heat needed to warm the water would be (1.7 kg * 4.184 kJ/kg °C * 75 °C) = 532.722 kJ.
Since only 16% of the heat from the LP gas goes to heat the water, the total energy provided by the combustion of LP gas would be obtained by dividing the heat to warm water (532.722 kJ) by 0.16, which equals to 3.33 * 10^3 kJ.
Considering that the heat of combustion of LP gas is about 50 kJ/g approx, the mass of LP gas needed would finally be found by dividing the total energy provided by the LP gas (3.33 * 10^3 kJ) by the heat of combustion of LP gas, which results in approximately 66.7 kg.
Learn more about Heat transfer here:https://brainly.com/question/13433948
#SPJ12
What two observable properties of a cepheid variable are directly related to one another?
Answer: At the period that's between its peaks of brightness and its luminosity.
Explanation:
The two observable properties of a cepheid variable that are directly related to one another at the period between its peaks of brightness and its luminosity. The period-luminosity relation allows us to determine its luminosity from the period between its peaks of brightness. In astronomy, a period-luminosity relation is a relationship linking the luminosity of pulsating variable stars with their pulsation period. The popular relation, for Classical Cepheid variables, is also called Leavitt's law
Demand for a certain product is forecast to be 800 units per month, averaged over all 12 months of the year. The product follows a seasonal pattern, for which the January monthly index is 0.8. What is the seasonally-adjusted sales forecast for January?
Answer:
Adjusted forecast for January is 640
Explanation:
given,
Demand forecast of a certain product = 800 units
averaged over all months = 12 months
January monthly index = 0.8
We have to find seasonally-adjustment sales for January
Adjusted forecast = ( Demand ) x ( monthly index )
= 800 x 0.8
= 640
Adjusted forecast for January is 640
Water is flowing in a pipe with a varying cross-sectional area, and at all points, the water completely fills the pipe. At point 1, the cross-sectional area of the pipe is 7.70×10−2 m2 and the magnitude of the fluid velocity is 3.60 m/s.
a. What is the fluid speed at points in the pipe where the cross-sectional area is (a) 0.105 m and (b) 0.047m2?
b. Calculate the volume of water discharged from the open end of the pipe in 1.00 hour.
Answer:
a. 2.64 m/s
b. 5.9 m/s
c. 997.92 m3
Explanation:
As this is steady flow, the mass flow rate is constant, and so is the product of flow velocity and cross-sectional area
av = 0.077 * 3.6 = 0.2772 m3/s
We can calculate the speed at various areas by dividing the product above by area
a.[tex]v_1 = 0.2772 / a_1 = 0.2772 / 0.105 = 2.64 m/s[/tex]
b.[tex]v_2 = 0.2772 / a_2 = 0.2772 / 0.047 = 5.9 m/s[/tex]
c. Since the volume discharge rate is 0.2772 cube meters per second. In 1 hour, or 60 * 60 = 3600 seconds, the total volume of water discharged would be
0.2772 * 3600 = 997.92 m3
A water pipe with a varying cross-sectional area has a flow rate of 0.277 m³/s at one point. Over one hour, the pipe discharges 1000 m³ of water.
a. Since the water is incompressible, the volume flow rate at all points in the pipe must remain constant. This means that the product of the cross-sectional area and the fluid velocity must be the same at every point.
Using the continuity equation, we can calculate the fluid velocity at points 2 and 3:
V1 * A1 = V2 * A2
3.60 m/s * 7.70×10−2 m2 = V2 * 0.105 m2
Solving for V2:
V2 = (3.60 m/s * 7.70×10−2 m2) / 0.105 m2
V2 ≈ 2.64 m/s
Similarly, for point 3:
V1 * A1 = V3 * A3
3.60 m/s * 7.70×10−2 m2 = V3 * 0.047 m2
Solving for V3:
V3 = (3.60 m/s * 7.70×10−2 m2) / 0.047 m2
V3 ≈ 5.898 m/s
b. To calculate the volume of water discharged from the open end of the pipe in 1.00 hour, we need to determine the volume flow rate and multiply it by the time.
Volume flow rate = Cross-sectional area * Fluid velocity
Volume flow rate = 0.047 m2 * 5.898 m/s
Volume flow rate ≈ 0.277 m³/s
Volume of water discharged in 1.00 hour:
Volume flow rate * Time
0.277 m³/s * 3600 s/hour
≈ 999.12 m³
Since the volume of water discharged in 1.00 hour is close to 1000 m³, we can round it to 1000 m³.
For more such questions on area
https://brainly.com/question/30076645
#SPJ3
A ball (mass 0.40 kg) is initially moving to the left at 30 m/s. After hitting the wall, the ball is moving to the right at 20 m/s. What is the impulse of the net force on the ball during its collision with the wall?
A) 20 kg. m/s to the right
B) 20 kg. m/s to the left
C) 4.0 kg. m/s to the right
D) 4.0 kg. m/s to the left
E) none of the above
Answer:
Option (a)
Explanation:
Impulse is defined as the change in momentum of the body. It is a vector quantity and its SI unit is Kg m/s.
mass of ball, m = 0.4 kg
initial velocity, u = - 30 m/s
Final velocity, v = + 20 m/s
Initial momentum, pi = mass x initial velocity = m u = 0.4 x (- 30) = - 12 kg m/ s
Final momentum, pf = mass x final velocity = mv = 0.4 x 20 = 8 Kg m /s
Change in momentum = final momentum - initial momentum = 8 - (- 12 )
So, impulse = 20 kg m /s right
Option (a) is correct
Final answer:
The impulse of the net force on the ball during its collision with the wall is the change in momentum, coming to 32 kg·m/s to the right, leading to option E) none of the above as the correct answer.
Explanation:
The impulse of the net force on a ball during its collision with the wall can be calculated using the change in momentum of the ball, which is equal to the impulse imparted to it. If the ball has a mass of 0.40 kg and changes its velocity from 30 m/s to the left (which we can consider as a negative direction) to 20 m/s to the right (a positive direction), we need to take into account the magnitude and the direction of this change.
The initial momentum of the ball is given by the product of its mass and its initial velocity, which is -0.40 kg × 30 m/s (the negative sign indicates the initial leftward direction). The final momentum after the collision is 0.40 kg × 20 m/s. The impulse is the difference between the final and initial momentum: (0.40 kg × 20 m/s) - (-0.40 kg × 30 m/s), which equals 20 kg·m/s + 12 kg·m/s or 32 kg·m/s to the right. Therefore, the correct answer is E) none of the above.
A roller coaster cart of mass m = 223 kg starts stationary at point A, where h1 = 26.8 m and a while later is at B, were h2 = 14.7 m. The acceleration of gravity is 9.8 m/s 2 . What is the speed of the cart at B, ignoring the effect of friction?
Answer:
vB = 15.4 m/s
Explanation:
Principle of conservation of energy:
Because there is no friction the mechanical energy is conserve
ΔE = 0
ΔE : mechanical energy change (J)
K : Kinetic energy (J)
U: Potential energy (J)
K = (1/2)mv²
U = m*g*h
Where :
m: mass (kg)
v : speed (m/s)
h : hight (m)
Ef - Ei = 0
(K+U)final - (K+U)initial =0
(K+U)final = (K+U)initial
((1/2)mv²+m*g*h)final = ((1/2)mv²+m*g*h)initial , We divided by m both sides of the equation:
((1/2)vB² + g*hB = (1/2 )vA²+ g*hA
(1/2) (vB)² + (9.8)*(14.7) = 0 + (9.8)(26.8 )
(1/2) (vB)² = (9.8)(26.8 ) - (9.8)*(14.7)
(vB)² = (2)(9.8)(26.8 - 14.7)
(vB)² = 237.16
[tex]v_{B} = \sqrt{237.16}[/tex]
vB = 15.4 m/s : speed of the cart at B
Answer:
the guy above me is correct
Explanation:
As a result of the violent revolts in france in july 1830
Answer:
As a result of the violent revolts in france in july 1830 gave up the throne and fled for Great Britain.
Explanation:
Following Charles X taking the throne of France, he strengthened the power of the clergy and the monarchy. In 1830, Charles X attempted to suppress the Constitution, suspend Parliament, and shut down the press. The press disobeyed and encouraged mobs to protest. The protests got violent and fearing for his life, Charles X stepped down from the throne and took his family to Great Britain.
Neurons and some other specialized cells divide infrequently because they
Answer: The correct answer is : have entered into G0
Explanation: G0 is the fifth phase, it is named because it is out of the cycle, it is still for an undefined time when new cells are not needed and in this phase the cell is not in division and has lost the ability to perform mitosis.
The engine of a 2000 kg Mercedes going up Pike’s Peak delivers energy to its drive wheel at the rate 100 kW . Neglecting air resistance, what is the largest speed the car can sustain on the steep Pike’s Peak mountain highway, where the road is 30° to the horizontal? The acceleration due to gravity is 10 m/s².
1. 10 m/s
2. 20 m/s
3. 100 m/s
4. 40 m/s
5. 0 m/s
Answer:
10 m/s
Explanation:
mass, M = 2000 kg
Power, P = 100 kW = 100000 W
inclination, θ = 30°
g = 10 m/s^2
Let the velocity is v.
P = F x v
where, F is force and v be the velocity
100000 = mg Sin 30 x v
100000 = 2000 x 10 x 0.5 x v
v = 10 m/s
Thus, the speed is 10 m/s.
Consult Interactive Solution 10.37 to explore a model for solving this problem. A spring is compressed by 0.0647 m and is used to launch an object horizontally with a speed of 2.08 m/s. If the object were attached to the spring, at what angular frequency (in rad/s) would it oscillate?
Answer:
[tex]\omega=32.14\ rad/s[/tex]
Explanation:
Given that,
The compression in the spring, x = 0.0647 m
Speed of the object, v = 2.08 m/s
To find,
Angular frequency of the object.
Solution,
We know that the elation between the amplitude and the angular frequency in SHM is given by :
[tex]v=\omega\times A[/tex]
A is the amplitude
In case of spring the compression in the spring is equal to its amplitude
[tex]\omega=\dfrac{v}{A}[/tex]
[tex]\omega=\dfrac{2.08\ m/s}{0.0647\ m}[/tex]
[tex]\omega=32.14\ rad/s[/tex]
So, the angular frequency of the spring is 32.14 rad/s.
The tired of a car support the weight of a stationary. If onetire has a slow leak, the air pressure within the tire will_____with time, the surface area between the tire and the roadwill____in time, and the net force the tire exerts on the roadwill_____in time.a) Increase, Increase, Increaseb) Decrease, decrease, decreasec) Decrease. increase,increased) Decrease, increase, remain constante) Decrease, increase, decrease
Answer:
d) Decrease, increase, remain constant
Explanation:
If one tire has a slow leak, the air pressure within the tire will_DECREASE____with time due to outflow of air , the surface area between the tire and the road will__INCREASE__in time,due to flattening of tire.
The net force the tire exerts on the road will_REMAIN CONSTANT____in time. It is so because force does not depend upon area. It is pressure which depends upon area. As there is no change in the weight of the car , force on the road will remain constant.
The speed of light in air 1. depends only on the frequency of the light. 2. depends on both the wavelength and the frequency of light. 3. depends only on the wavelength of light. 4. is independent of the wavelength and frequency of light.
Final answer:
The speed of light in air depends on both the wavelength and the frequency of light. Increasing or decreasing the frequency of light leads to changes in the amount of delay.
Explanation:
The speed of light in air depends on both the wavelength and the frequency of light. This relationship is defined by the equation c = fλ, where c is the speed of light, f is the frequency, and λ is the wavelength.
When the frequency of light increases, the wavelength decreases, and vice versa. This means that as you make the frequency higher or lower, there is a corresponding change in the amount of delay.
For example, if you increase the frequency, the wavelength becomes smaller, which leads to a shorter delay. On the other hand, if you decrease the frequency, the wavelength becomes larger, resulting in a longer delay.
How much work is done when a vertical force acts on an object moving horizontally
Answer:
Zero work is done when a vertical force acts on an object moving horizontally
Explanation:
Word is the dot product of force and displacement.
W = F . s
W = Fs cosθ
θ is the angle between force and displacement,
We need to find how much work is done when a vertical force acts on an object moving horizontally.
That is angle between force and displacement = 90°
θ = = 90°
Substituting
W = Fs cos90 = Fs x 0 = 0
Zero work is done when a vertical force acts on an object moving horizontally
The 50-kg wheel rolls on its hub up the circular incline under the action of the 12-kg cylinder attached to a cord around the rim. Determine the angle θ at which the wheel comes to rest, assuming that friction is sufficient to prevent slippage. What is the minimum coefficient of static friction which will permit this position to be reached with no slipping?
Final Answer:
The angle θ at which the wheel comes to rest is approximately θ = tan^(-1)(μ), where μ is the coefficient of static friction. The minimum coefficient of static friction required to prevent slipping is μ = tan^(-1)(m_wheel / m_cylinder), where m_wheel is the mass of the wheel and m_cylinder is the mass of the cylinder.
Explanation:
In this scenario, the forces involved include the gravitational force acting on both the wheel and the cylinder and the tension in the cord. The component of the gravitational force parallel to the incline causes the wheel to roll, and the frictional force opposes slipping. At the point where the wheel comes to rest, the net force along the incline is zero.
Using the equilibrium condition, the gravitational force component along the incline is balanced by the frictional force. This gives us the equation: m_wheel * g * sin(θ) = μ * m_wheel * g * cos(θ), where g is the acceleration due to gravity. Simplifying, we find μ = tan(θ).
To find the minimum coefficient of static friction, we can substitute the masses of the wheel and cylinder: μ_min = tan^(-1)(m_wheel / m_cylinder). This represents the point where the wheel will come to rest without slipping. The tan^(-1) function gives the angle at which the static friction is just sufficient to prevent slipping, and this corresponds to the minimum coefficient of static friction required.
Which of Galileo's theories drew fire from the Catholic Church and led to his house arrest? Objects of different weights fall at the same speed. The Sun is at the center of the solar system and the planets move around it. The time taken to swing through one complete cycle depended on the length of the pendulum. Ocean tides are caused by Earth's rotation and revolution.
Answer: The Sun is at the center of the solar system and the planets move around it.
Explanation:
During the Middle Ages, it was believed that the Earth remained motionless, occupying the center of a universe subject to uniform circular motion where Earth was the only world. All this because the only accepted idea was that of Ptolemy.
Until the Polish astronomer Nicolaus Copernicus proposed that the Earth annually orbits the Sun and rotates once a day on its own axis. He also dared to affirm that the other planets also orbited the Sun as a fixed point. This meant the Earth was no longer unique, nor did it occupy the center of the known universe.
On the other hand, Galileo observed Venus with his telescope and found out it presented phases (such as those of the moon) together with a variation in size; observations that are only compatible with the fact that Venus rotates around the Sun and not around Earth.
These observations and discoveries were presented by Galileo to the Catholic Church (which supported the geocentric theory at that time) as a proof that completely refuted Ptolemy's geocentric system and affirmed Copernicus' heliocentric theory.
It is important to note, this was the main reason for Galileo to be arrested.
The acceleration vector of a particle in uniform circular motion __________.
Answer:
It is known as the centripetal vector directed to the centre of the fictious circumference
The acceleration vector of a particle in uniform circular motion always points towards the center of the circle
Explanation:The total acceleration vector of a particle in uniform circular motion always points towards the center of the circle. It is directed perpendicular to the velocity vector and its magnitude is given by [tex]a = v^2/r,[/tex] where v is the magnitude of the velocity vector and r is the radius of the circle.
For example, when a car is moving in a circular path on a banked turn, the acceleration vector points towards the centre of the turn, keeping the car on the circular track. In summary, the acceleration vector of a particle in uniform circular motion is always directed towards the centre of the circle and its magnitude is given by [tex]a = v^2/r,[/tex]
Learn more about Uniform circular motion here:https://brainly.com/question/33720661
#SPJ6
Your plot your results as I versus 1/d and find that the data lie close to a straight line that has slope 600 A⋅m. What is the resistivity of the material of which the wire is made? Express your answer in ohm-meters.
Answer:
[tex]\rho=4.02\times 10^{-8}\ \Omega-m[/tex]
Explanation:
Let us assume that the radius of the wire, r = 0.8 mm = 0.0008 m
EMF of the battery, V = 12 V
Slope of I versus 1/d, m = 600 A-m
The resistance of any material is given by :
[tex]R=\rho \dfrac{d}{A}[/tex]
d is the length of wire
Since, [tex]I=\dfrac{V}{R}[/tex]
[tex]I=\dfrac{VA}{\rho d}[/tex]
[tex]I=\dfrac{VA}{\rho}.(\dfrac{1}{d})[/tex]
[tex]y=slope\times x[/tex]
[tex]\dfrac{VA}{\rho}=600[/tex]
[tex]\rho=\dfrac{VA}{600}[/tex]
[tex]\rho=\dfrac{12\times \pi \times (0.0008)^2}{600}[/tex]
[tex]\rho=4.02\times 10^{-8}\ \Omega-m[/tex]
So, the resistivity of the material of which the wire is made is [tex]4.02\times 10^{-8}\ \Omega-m[/tex].
The slope of the I vs. 1/d graph represents the resistivity of the wire's material. The given slope is 600 A*m, therefore, the resistivity of the material this wire is made of is 600 Ω*m.
Explanation:The slope of the I vs. 1/d graph is equal to the resistivity of the material the wire is made of. In this case, the slope is given as 600 A*m, so this means the resistivity of the material the wire is made of is 600 Ω*m. This is derived from Ohm's law V=IR which when arranged as I = V/R, indicates that the slope of the graph is the resistance. Since, the resistance R of a cylindrical conductor is directly related to the resistivity (ρ) of the material as R = ρL/A, where L is the length and A is the cross-sectional area, the slope is a representation of this relationship hence representing resistivity.
Learn more about Resistivity here:https://brainly.com/question/39968240
#SPJ3
The motion detector used in a physics lab sends and receives 30 kHz ultrasonic pulses. A pulse goes out, reflects off the object being measured, and returns to the detector. The lab temperature is 20 ∘C.
Answer
Given,
Frequency of the ultrasonic pulse = 30 kHz
Speed of the sound = v = 343 m/s
wavelength of the wave emitted = ?
using formula
[tex]v = \nu \lambda[/tex]
[tex]\lambda= \dfrac{v}{\nu}[/tex]
[tex]\lambda= \dfrac{343}{30\times 10^3}[/tex]
[tex]\lambda=11.43 \times 10^{-3}\ m[/tex]
[tex]\lambda=11.43\ mm[/tex]
time taken for a pulse that reflects off an object 3.0 m away to make a round trip
[tex]time = \dfrac{\Delta x}{\Delta v}[/tex]
[tex]time = \dfrac{2\times 3}{343}[/tex]
t = 0.01749 s
t = 17.49 ms
The motion detector uses ultrasonic waves to measure distance by timing the round trip of a sound wave. Distance is calculated using the speed of sound and the time taken for the echo to return, and the calculation requires a division by 2 to account for the round trip. Calibration is important for accuracy as the speed of sound changes with temperature.
Explanation:The motion detector described is a classic example of how ultrasonic waves can be used to measure distance. A similar principle is applied in an automatic focus camera, which generates ultrasonic sound waves, captures their reflections off objects, and calculates the distance based on the time delay of the returning waves. The speed of sound in air at 20 ℃ is approximately 344 m/s. Therefore, if a sound wave returns after 0.150 seconds, we can calculate the distance to the object as follows:
Distance = Speed of Sound × Time / 2
Distance = 344 m/s × 0.150 s / 2
Distance = 25.8 meters
This calculation takes into account that the sound wave must travel to the object and back, making the total distance twice the distance we want to measure, hence the division by 2.
The ultrasonic range finder and technologies such as radar and Doppler shift applications in traffic law enforcement rely on similar concepts of wave reflection and frequency shifts to measure distance and speed.
To understand the effects of temperature on the calibration of such devices, the room temperature is required because the speed of sound in air changes with temperature, potentially influencing the accuracy of these measurements.
Suzie (of mass 42 kg) is roller-blading down the sidewalk going 32 miles per hour. She notices a group of workers down the walkway who have unexpectedly blocked her path, and she makes a quick stop in 2.2 seconds.a) What is Suzie’s average acceleration? Answer in units of m/s 2 .b) What force in Newtons was exerted to stop Suzie? Answer in units of N.
Answer:
a) Suzie’s average acceleration = -6.46 m/s²
b) Force exerted to stop Suzie = 271.52 N
Explanation:
a) We have equation of motion, v = u + at
Final velocity, v = 0 m/s
Initial velocity, u = 32 mph = 14.22 m/s
Time, t =2.2 s
Substituting
0 = 14.22 + a x 2.2
a = -6.46 m/s²
Suzie’s average acceleration = -6.46 m/s²
b) Mass of Suzie = 42 kg
Force = Mass x Acceleration
F = Ma
F = 42 x -6.46 =-271.52 N
Force exerted to stop Suzie = 271.52 N
For objects at thermal equilibrium, which of the following is true? a. Each is at the same temperature. b. Each has the same internal energy. c. Each has the same heat. d. All of the above. e. None of the above.
Answer:a) Each is at same temperature
Explanation:
According to the zeroth law of thermodynamics when two objects are in thermal equilibrium with the third one then they are at thermal equilibrium with each other thus they all are at the same temperature.
Here Also objects are in thermal Equilibrium then they should be at the same temperature.
As Internal Energy is an Extensive Property that depends on the amount of gas Present thus two gases at thermal Equilibrium can have different Temperatures.
Final answer:
Objects at thermal equilibrium are at the same temperature, by the principle of thermal equilibrium and the Zeroth law of thermodynamics. This equilibrium does not require the objects to have the same internal energy or heat content.
Explanation:
For objects at thermal equilibrium, the correct statement is that each is at the same temperature. This is directly derived from the principle of thermal equilibrium, which states when two or more objects are in thermal contact and no heat flows between them, they are considered to be in thermal equilibrium. According to the Zeroth law of thermodynamics, if object A is in thermal equilibrium with object B, and object A is also in thermal equilibrium with object C, then objects B and C are in thermal equilibrium with one another. This invariably leads to the understanding that all objects at thermal equilibrium share the same temperature, but not necessarily the same internal energy or the same amount of heat.
While the law of conservation of energy ensures that the total energy in an isolated system remains constant, how this energy is distributed among objects (in terms of internal energy or heat) can vary significantly based on each object's specific heat capacity, mass, and other factors. Therefore, the correct answer to the question is: a. Each is at the same temperature.
What elements had to be made in a supernova explosion?
Answer:
Gold, Platinum and Uranium
Explanation:
A star is nothing but a huge ball of gas. Specifically, Hydrogen, the simplest element of nature. A star is in equilibrium because its immense mass causes it to collapse towards itself, squeezing those hydrogen nuclei or protons, and the union of the protons in its nucleus causes the star to explode, releasing energy. As long as these nuclear reactions exist (the same ones that human beings can cause with their hydrogen bombs), the star will remain in equilibrium.
Protons have a positive charge and tend to repel. But inside the stars they are so tight (there is a lot of pressure and temperature), that they can't avoid crashing. At that time, the electromagnetic force is defeated by what physicists call Strong Force, which holds together protons and neutrons forming more complex atoms. In a typical star, the protons join to form the next element in the periodic table: Helium, consisting of 2 protons and two neutrons. It is a rare element on Earth and was discovered in the Sun rather than on our planet. Hence his name, from the Greek Helios, the sun god.
However, the mass of the sum of the protons that bind to form Helium is less than the total mass of Helium. What happen? Are the laws of physics inside the stars not fulfilled? What happens is impossible to understand if one is born before Albert Einstein, but today it is very easy to explain. The mass that we lack, has actually become energy. The German physicist Albert Einstein (1879-1955) discovered that mass and energy are equivalent while formulating his Theory of Relativity. In fact, let me, for once, write a mathematical equation of an unparalleled beauty:
E = mc2
This equation tells us that the energy E is equal to the mass m times the square of a constant c; that constant c is the speed of light, approximately 300,000 km / s. That is, a very small mass, such as a proton, is equivalent to a very large energy, since the numerical factor by which the mass is multiplied is a very large number. And that energy is what the stars release, the one that our Sun emits and gives us life.
When Hydrogen is depleted, the star collapses until the pressure and temperature increase enough for Helium to fuse with itself; the cycle is repeated and the star ends up generating Carbon, Oxygen, Nitrogen, Silicon, Iron. As you can see, the stars are factories of atoms. When the star explodes, even heavier atoms are generated, such as Gold, Platinum, Uranium, elements that abound on our planet. And they abound, because the Sun is a second or third generation star: that is, it was born from the remains of other stars' explosions, along with the materials that make up our planet, the rest of the planets, the asteroids, the comets, the interstellar dust and ourselves.
Some people think a pendulum with a period of 1.00 s can be driven with "mental energy" or psycho kinetically, because its period is the same as an average heartbeat. True or not, what is the length (in cm) of such a pendulum?
Answer:
l=24.8 cm
Explanation:
The period of a simple pendulum is given by
[tex]T= 2\pi\sqrt{\frac{l}{g} }[/tex]
l= length of pendulum
g= acceleration due to gravity
taking square on both the sides we get
[tex]T^2= 4\pi^2\frac{l}{g}[/tex]
This can be rewritten as
[tex]l = \frac{T^2}{g}4\pi^2[/tex]
now substituting T= 1 and g= 9.8
[tex]l = \frac{1^2}{9.8}4\pi^2[/tex]
l= 0.248 m = 24.8 cm
Final answer:
The length of a pendulum with a period of 1.00 s can be calculated using the formula L = (T^2/g)π^2, resulting in a length of approximately 0.999 m or 99.9 cm.
Explanation:
The period of a pendulum is determined by its length and the acceleration due to gravity, and it is independent of factors such as mass or amplitude. The period is given by the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
In the given question, the period of the pendulum is 1.00 s. To find the length of the pendulum, we can rearrange the formula and solve for L: L = (T^2/g)π^2.
Using a standard value for acceleration due to gravity of 9.8 m/s^2, we can substitute the values to find the length of the pendulum: L = (1.00 s^2 / 9.8 m/s^2)π^2. Evaluating this expression, we find that the length of the pendulum is approximately 0.999 m, or 99.9 cm.
A ball is thrown vertically upward with an initial velocity of 23.6 meters per second. What is the maximum height reached by the ball? Please include your answer with a unit symbol.
Answer:
Maximum height attained by the ball will be h = 28.416 m
Explanation:
We have given initial speed of the ball u = 23.6 m /sec
At maximum height velocity will be zero so final velocity v = 0 m/sec
Acceleration due to gravity [tex]g=9.8m/sec^2[/tex]
From law of motion we know that [tex]v^2=u^2-2gh[/tex]
[tex]0^2=23.6^2-2\times 9.8\times h[/tex]
h = 28.416 m
So maximum height attained by the ball will be h = 28.416 m
A(n) 12 g object moving to the right at 29 cm/s overtakes and collides elastically with a 24 g object moving in the same direction at 14 cm/s. Find the velocity of the slower object after the collision. Answer in units of cm/s.
Answer: 16.9cm/s
Explanation:
According to the principle of conservation of linear momentum which states that the sum of momentum of bodies before collision is equal to the sum of their momentum after collision.
Momentum = mass × velocity of the body
Let m1 be mass of the first body= 12g
m2 be mass of the second body= 29cm/s
v1 be velocity of the first body= 24g
v2 be velocity of the second body= 14cm/s.
Note that both objects will move with a common velocity (v) after collision. Using the formula
m1v1 + m2v2 = m1v +m2v
12(24) + 29(14) = (12+29)v
288+406 = 41v
694 = 41v
v = 694/41
v = 16.9cm/s
To find the velocity of the slower object after the elastic collision, we can use the conservation of momentum and kinetic energy equations. By plugging in the given values and solving the system of equations, we can determine the final velocities of both objects.
Explanation:In an elastic collision, the total momentum of the system is conserved. To find the velocity of the slower object after the collision, we can use the equation:
mass₁ × velocity₁ + mass₂ × velocity₂ = mass₁ × final_velocity₁ + mass₂ × final_velocity₂
Plugging in the values, we have:
12g × 29 cm/s + 24g × 14 cm/s = 12g × final_velocity₁ + 24g × final_velocity₂
Converting the masses to kg, and solving for final_velocity₂:
0.012 kg × (29 cm/s) + 0.024 kg × (14 cm/s) = 0.012 kg × (final_velocity₁) + 0.024 kg × (final_velocity₂)
0.348 kg cm/s + 0.336 kg cm/s = 0.012 kg × final_velocity₁ + 0.024 kg × final_velocity₂
0.684 kg cm/s = 0.012 kg × final_velocity₁ + 0.024 kg × final_velocity₂
Since the collision is elastic, the total kinetic energy of the system is conserved. This means that the final kinetic energy of the system is equal to the initial kinetic energy.
Using the formula for kinetic energy:
(1/2) × mass₁ × (velocity₁)² + (1/2) × mass₂ × (velocity₂)² = (1/2) × mass₁ × (final_velocity₁)² + (1/2) × mass₂ × (final_velocity₂)²
Plugging in the values:
(1/2) × 0.012 kg × (29 cm/s)² + (1/2) × 0.024 kg × (14 cm/s)² = (1/2) × 0.012 kg × (final_velocity₁)² + (1/2) × 0.024 kg × (final_velocity₂)²
0.012 kg cm²/s² + 0.024 kg cm²/s² = 0.012 kg × (final_velocity₁)² + 0.024 kg × (final_velocity₂)²
0.036 kg cm²/s² + 0.336 kg cm²/s² = 0.012 kg × (final_velocity₁)² + 0.024 kg × (final_velocity₂)²
0.372 kg cm²/s² = 0.012 kg × (final_velocity₁)² + 0.024 kg × (final_velocity₂)²
We now have a system of two equations with two unknowns. Solving this system will give us the final velocities of both objects after the collision.
At a rock concert, a dB meter registered 130 dB when placed 2.5 m in front of a loudspeaker on stage. (a) What was the power output of the speaker, assuming uniform spherical spreading of the sound and neglecting absorption in the air? (b) How far away would the sound level be 85 dB?
Answer:
785.398 W
444.5698 m
Explanation:
I = Intensity of sound
r = Distance
The intensity of sound is given by
[tex]\beta=10log\frac{I}{I_0}\\\Rightarrow 130=10log\frac{I}{10^{-12}}\\\Rightarrow 13=log\frac{I}{10^{-12}}\\\Rightarrow 10^{13}=\frac{I}{10^{-12}}\\\Rightarrow I=10^{-12}\times 10^{13}\\\Rightarrow I=10\ W/m^2[/tex]
Power
[tex]P=IA\\\Rightarrow P=I4\pi r^2\\\Rightarrow P=10\times 4\pi\times 2.5^2\\\Rightarrow P=785.398\ W[/tex]
The power output of the speaker is 785.398 W
If [tex]\beta=85\ db[/tex]
[tex]\beta=10log\frac{I}{I_0}\\\Rightarrow 85=10log\frac{I}{10^{-12}}\\\Rightarrow 8.5=log\frac{I}{10^{-12}}\\\Rightarrow 10^{8.5}=\frac{I}{10^{-12}}\\\Rightarrow I=10^{-12}\times 10^{8.5}\\\Rightarrow I=10^{-3.5}\ W/m^2[/tex]
[tex]P=IA\\\Rightarrow P=I4\pi r^2\\\Rightarrow r=\sqrt{\frac{P}{I4\pi}}\\\Rightarrow r=\sqrt{\frac{785.398}{10^{-3.5}\times 4\pi}}\\\Rightarrow r=444.5698\ m[/tex]
The distance would be 444.5698 m
To calculate the power output of the speaker, we can convert the sound level from decibels to intensity and then use the formula for spherical spreading of sound. To find the distance where the sound level is 85 dB, we can use the same formula and solve for the distance.
Explanation:To calculate the power output of the speaker, we first need to convert the sound level from decibels to intensity. We can use the formula I = Io * 10^(B/10), where I is the intensity, Io is a reference intensity, and B is the sound level in decibels. With Io = 10^-12 W/m² and B = 130 dB, we can find I. Since the sound spreads in a sphere, we can use the formula I = P / (4πr²), where P is the power output of the speaker and r is the distance. We know I and r, so we can solve for P.
Using the same formula, we can find the distance r where the sound level is 85 dB. We are given the intensity I and the sound level B, so we can solve for r using the formula r = sqrt(P / (4πI)).
Learn more about Calculating sound power and distance here:https://brainly.com/question/29656413
#SPJ3
A heavy boy and a lightweight girl are balanced on a massless seesaw. If they both
move forward so that they are one-half their original distance from the pivot point,what will happen to the seesaw? Assume that both people are small enough compared to the length of the seesaw to be thought of as point masses.
A. It is impossible to say without knowing the masses.
B. It is impossible to say without knowing the distances.
C. The side the boy is sitting on will tilt downward.
D. Nothing will happen; the seesaw will still be balanced.
E. The side the girl is sitting on will tilt downward.
Answer:
D. Nothing will happen; the seesaw will still be balanced.
Explanation:
D. Nothing will happen; the seesaw will still be balanced. Since both toruqes or momentums respect to the center have changed in the same amount (one-half their original distance) the seesaw will remain balanced, if the children change distance in a different amount then it will be out of balance
D. Nothing will happen; the seesaw will still be balanced.
Further explanationThe force acting on a system with static equilibrium is 0
[tex] \large {\boxed {\bold {\sum F = 0}} [/tex]
(forces acting as translational motion only, not including rotational forces)
[tex] \displaystyle \sum F_x = 0 \\\\\ sum F_y = 0 [/tex]
For objects undergoing rotation, the equilibrium must be met
[tex] \large {\boxed {\bold {\sum \tau = 0}} [/tex]
A heavy boy (Hb) and a lightweight girl (Lg) are balanced on a mass-less seesaw
Because there is a balance of rotation, the torque equation:
Στ = 0
Hb.r1-Lg.r2 = 0
Hb.r1 = Lg.r2 (equation 1)
If they both move forward so that they are one-half their original distance from the pivot point, then the distance of the two children to the pivot point is reduced to half
Then the torque equation:
[tex]\rm Hb\times \dfrac{r_1}{2}= Lg\times \dfrac{r_2}{2}\\\\Hb\times r_1=Lg\times r_2[/tex]
This equation remains the same as equation 1, so the seesaw will still be balanced.
Learn more
tangential force
https://brainly.com/question/2175648
displacement of a skateboarder
brainly.com/question/1581159
The distance of the elevator
brainly.com/question/8729508
The electrostatic attraction that binds oppositely charged ions together is called
Final answer:
An ionic bond is the electrostatic attraction that holds together ions with opposite charges in an ionic compound, such as sodium and chlorine forming table salt.
Explanation:
The electrostatic attraction that binds oppositely charged ions together is known as an ionic bond. This type of chemical bond is fundamental in the formation of ionic compounds where electrons are transferred from one atom to another, such as the formation of table salt from sodium and chlorine.
Ions are created when atoms either lose or gain electrons, leading to the formation of cations (positively charged) and anions (negatively charged). The electrostatic attraction between these ions of opposite charge results in a stable ionic structure. For instance, a sodium ion (Na+) will form a stronger ionic bond with a 2+ charge than with a 1+ charge due to the increased electrostatic attraction.
A 0.20-kg block rests on a frictionless level surface and is attached to a horizontally aligned spring with a spring constant of 40 N/m. The block is initially displaced 4.0 cm from the equilibrium point and then released to set up a simple harmonic motion. What is the speed of the block when it passes through the equilibrium point?
Answer:
[tex]0.57 ms^{-1}[/tex]
Explanation:
k = spring constant of the spring = 40 Nm⁻¹
A = amplitude of the simple harmonic motion = 4 cm = 0.04 m
m = mass of the block attached to spring = 0.20 kg
w = angular frequency of the simple harmonic motion
Angular frequency of the simple harmonic motion is given as [tex]w = \sqrt{\frac{k}{m} } \\w = \sqrt{\frac{40}{0.20} }\\w = 14.14 rads^{-1}[/tex]
[tex]v[/tex] = Speed of the block as it pass the equilibrium point
Speed of the block as it pass the equilibrium point is given as
[tex]v = A w\\v = (0.04) (14.14)\\v = 0.57 ms^{-1}[/tex]
Final answer:
The speed of a 0.20-kg block attached to a spring and released from a displacement of 4.0 cm on a frictionless surface is calculated to be 0.4 m/s when it passes through the equilibrium point, using conservation of mechanical energy.
Explanation:
The question involves calculating the speed of a block when it passes through the equilibrium point after being released from a displacement in a setup involving harmonic motion. In this case, we use the principle of conservation of mechanical energy. The total mechanical energy in a system, including potential and kinetic energy, remains constant if only conservative forces are doing work. Since the surface is frictionless and the only force doing work is conservative (spring force), the potential energy stored in the spring when the block is displaced is fully converted into kinetic energy when the block passes through the equilibrium position.
The potential energy stored in the spring at the maximum displacement is given by ½*k*x², where k is the spring constant (40 N/m) and x is the displacement (0.04 m). Thus, PE = 0.5 * 40 * (0.04)² = 0.032 J. At the equilibrium point, all this potential energy is converted into kinetic energy (KE = 0.5 * m * v²), allowing us to solve for v (speed). Rearranging KE = PE gives v = [tex]\sqrt{(2*PE/m)[/tex]. Plugging in the values, v = [tex]\sqrt{2*0.032/0.20[/tex] = 0.4 m/s.
The presently accepted value of the hubble constant gives an age of
Answer:
14 billion years
Explanation:
The Hubble – Lemaître law, previously called the Hubble law, is a law of physics that states that the redshift of a galaxy is proportional to the distance it is, which is the same as, the further one galaxy is found from another, more quickly it seems to move away from it.
The Hubble constant is the value that measures the rate at which the expansion speed of the Universe varies with distance, and is one of the fundamental parameters of the Universe and allows, in particular, to determine the age of the Universe as we will see.
Does electric charge flow across a circuit or through a circuit? Does voltage flow across a circuit or is it impressed across a circuit?
Answer:
Flow; Impressed
Explanation:
The electric charge can be think of as the flow rate of electrons in a certain area or point. Voltage is a difference in electrical potential, it makes charges to move in the electrical conductor, therefore it is impressed across a circuit
The basic fusion reaction through which the sun produces energy is __________.
Answer:
Fusion of hydrogen to helium
Explanation:
The sun produces its energy mainly by fusing hydrogen nuclei to form helium.
In the sun 4 hydrogen nuclei join to form one of helium, this fusion releases a lot of energy and because this fusion occurs in large quantities, this is where the energy of a star like our sun is produced, and that is the reason of its plasma state.
The energy produced in the fusion is received on earth in the form of electromagnetic radiation.