Answer:
He may experience increased metabolism, better weight management, and increased muscle strength and mass.
Explanation:
The upward force exerted on an object falling through air is _____.
A. terminal velocity
B. Momentum
C. Air Resistance
D. Weightless
(C) Air Resistance
Explanation:
When an object falls through air, air resistance acts on it in upward direction. When air resistance acts, acceleration during a fall will be less than g because air resistance affects the motion of the falling objects by slowing it down. Air resistance depends on two important factors - the speed of the object and its surface area. Increasing the surface area of an object decreases its speed.
A 7.80-g bullet moving at 540 m/s strikes the hand of a superhero, causing the hand to move 5.10 cm in the direction of the bullet's velocity before stopping. (a) Use work and energy considerations to find the average force that stops the bullet.
Answer:
[tex]F = 22298.824\,N[/tex]
Explanation:
According to the Principle of Energy Conservation and the Work-Energy Theorem, the bullet has the following expression:
[tex]U_{g,A} + K_{A} = U_{g,B} + K_{B} + W_{loss}[/tex]
[tex]W_{loss} = U_{g,A}-U_{g,B} + K_{A}-K_{B}[/tex]
[tex]F\cdot \Delta s = \frac{1}{2}\cdot m \cdot [v_{A}^{2}-v_{B}^{2}][/tex]
The average force exerted on the bullet to stop it is:
[tex]F = \frac{m\cdot [v_{A}^{2}-v_{B}^{2}]}{2\cdot \Delta s}[/tex]
[tex]F = \frac{(7.8\times 10^{-3}\,kg)\cdot [(540\,\frac{m}{s} )^{2}-(0\,\frac{m}{s} )^{2}]}{2\cdot (0.051\,m)}[/tex]
[tex]F = 22298.824\,N[/tex]
Answer:
22298.82N
Explanation:
The bullet has a kinetic energy: ½*m*v²
mass of bullet = 7.80g = 7.80÷1000 = 0.0078kg
distance in meter =5.10cm = 5.10÷100 = 0.051meter
K.e = 0.5 ×0.0078 × 540× 540
K.e = 1137.24 J
When the bullet stops this energy goes to zero, as the energy must be conserved the work done by the head of the superhero must be equal to the original energy of the bullet:
W= K
Considering an average constant force, the work can be calculated as:
W=F*d=K
Solving for F:
F = K/d
1137.24 J/ 0.051m
= 22298.82N
What is the surface temperature of a distant star having a peak wavelength of 475 nm?
Answer:
Explanation:
Given that,
The peak wavelength is
λp = 475nm
Then, we want to find the temperature,
From Wein's displacement law,
When the maximum is evaluated from the Planck radiation formula, the product of the peak wavelength and the temperature is found to be a constant (k = 2.898 ×10^-3 mK)
So, applying this we have
λp•T = 2.898 ×10^-3
T = 2.898 × 10^-3 / λp
T = 2.898 × 10^-3 / 475 × 10^-9
T = 6101.05 K
The surface temperature of the distant star having the given peak wavelength is 6.1 × 10³K.
Given the data in the question;'
Peak wavelength; [tex]\lambda _p = 475nm = 4.75 *10^{-7}m[/tex]
To determine the surface temperature the star, we use the expression for peak wavelength by Wien's Displacement Law:
[tex]\lambda _p = \frac{0.2898 * 10^{-2}m.K}{T}[/tex]
Where T is the surface temperature
We substitute our value into the formula and solve for for "T"
[tex]4.75*10^{-7}m = \frac{0.2898 * 10^{-2}m.K}{T}\\\\T = \frac{0.2898 * 10^{-2}m.K}{4.75*10^{-7}m}\\\\T = 6. 1 * 10^3K[/tex]
Therefore, the surface temperature of the distant star having the given peak wavelength is 6.1 × 10³K.
Learn more: https://brainly.com/question/3211170
oung's experiment is performed with light of wavelength 502 nm from excited helium atoms. Fringes are measured carefully on a screen 1.50 m away from the double slit, and the center of the 20th fringe (not counting the central bright fringe) is found to be 9.60 mm from the center of the central bright fringe. What is the separation of the two slits?
Answer:
0.00156875 m
Explanation:
y = Distance from the 20th fringe = 9.6 mm
l = Distance to screen = 1.5 m
[tex]\lambda[/tex] = Wavelength = [tex]502\ nm[/tex]
m = Number of fringe = 20
We have the relation
[tex]\dfrac{y}{l}=\dfrac{m\lambda}{d}\\\Rightarrow d=\dfrac{m\lambda l}{y}\\\Rightarrow d=\dfrac{20\times 502\times 10^{-9}\times 1.5}{9.6\times 10^{-3}}\\\Rightarrow d=0.00156875\ m[/tex]
The seperation of the two slits is 0.00156875 m
An antenna emits an electromagnetic wave. the electric field lines at a certain instant in time are shown.at point a, what is the direction of the magnetic field?
The direction of the magnetic field at a point in an electromagnetic wave can be determined using the 'right-hand rule'. Point your thumb in the direction of the electric field and curl your fingers. The direction your fingers curl is the direction of the magnetic field.
Explanation:In physics, particularly electromagnetic theory, the electric and magnetic fields of an electromagnetic wave are always perpendicular to each other and to the direction of propagation. The direction of the magnetic field at point 'a' can be determined by using the 'right-hand rule'. This rule states that if you point your thumb in the direction of the electric field and curl your fingers, the direction your fingers curl is the direction of the magnetic field. So, the direction of the magnetic field at point 'a' would be in the direction your fingers curl when you point your thumb in the direction of the electric field at point 'a'.
Learn more about Electromagnetic waves here:https://brainly.com/question/31660548
#SPJ3
According to the graph, what is the factorization of x2 - 6x + 5?
A. (X - 5)(x - 1)
B. (x + 5)(x - 1)
C. (X - 5)(x + 1)
D. (x + 5)(x + 1)
Answer:
the answer is A (×-5)(×-1)
Answer:
A. (x - 5)(x - 1)
Explanation:
x² - 6x + 5
ax² + by + c
What 2 numbers give a product of 5 (a * c) and a sum of -6 (b)?
-5, -1 ---> -5 + -1 = -6, (-5) * (-1) = 5
x² - 6x + 5 = (x - 5)(x - 1)
Does that help?
what game most represents a wave
Answer:
tipping over dominoes
Explanation:
?
One game that represents the concept of a wave is the puzzle game "Wave Wave."
In "Wave Wave," players control a small triangle as it navigates through a series of challenging and rhythmic levels filled with obstacles. The gameplay involves moving the triangle in sync with the pulsating waves that define the level's layout.
The game's visuals and mechanics are designed to mimic the appearance and behavior of a wave, with the obstacles and patterns resembling the peaks and troughs of waves. The player's goal is to maintain control and timing, moving the triangle smoothly through the undulating paths while avoiding collisions.
"Wave Wave" is a creative interpretation of the wave concept in a gaming context, with its gameplay mechanics directly tied to the idea of navigating through waves. Keep in mind that there might be other games that also incorporate wave-like mechanics, so this is just one example.
To know more about wave:
https://brainly.com/question/25954805
#SPJ6
Where would you expect to have more touch receptors: on the palm of your hand or on the back of your hand? Explain your reasoning
Explanation:
this is because if your going to touch something dangerouse your hand normally feels it first and its the front not the back so when you pick things up you can tell if its dangerouse hope that helped
The palm of the hand has more touch receptors than the back, due to its glabrous skin type which is thicker and more sensitive. These receptors allow for detection of fine touch and pressure, critical for manual tasks.
Explanation:Considering the density of touch receptors in different parts of our body, you could expect to have more touch receptors on the palm of your hand than on the back of your hand. This is due to the specific type of skin found on the palm, referred to as glabrous skin. This type of skin is typically thicker and more sensitive as compared to hairy skin, hence it contains more touch receptors.
The importance of the high density of touch receptors in areas such as palms and fingertips can be seen in the daily actions, such as the ability to sense fine touch and detailed information, which is necessary for fine motor tasks.
Furthermore, mechanoreceptors such as Merkel's disks, Meissner's corpuscles, Pacinian corpuscles, and Ruffini endings play a vital role in interpreting the touch-related sensory information of these regions. For instance, Merkel's disks and Meissner's corpuscles that are found deeper in the skin and in the upper parts of the skin respectively, detect fine touch. On the other hand, Pacinian corpuscles and Ruffini endings can sense deeper touch like pressure.
Learn more about Touch Receptors here:https://brainly.com/question/32104367
#SPJ2
A spaceship negotiates a circular turn of radius 2925 km at a speed of 29960 km/h. (a) What is the magnitude of the angular speed? 0.0028 Correct: Your answer is correct. rad/s (b) What is the magnitude of the radial acceleration? 23.68 Correct: Your answer is correct. m/s2 (c) What is the magnitude of the tangential acceleration? m/s2
a) 0.0028 rad/s
b) [tex]23.68 m/s^2[/tex]
c) [tex]0 m/s^2[/tex]
Explanation:
a)
When an object is in circular motion, the angular speed of the object is the rate of change of its angular position. In formula, it is given by
[tex]\omega = \frac{\theta}{t}[/tex]
where
[tex]\theta[/tex] is the angular displacement
t is the time interval
The angular speed of an object in circular motion can also be written as
[tex]\omega = \frac{v}{r}[/tex] (1)
where
v is the linear speed of the object
r is the radius of the orbit
For the spaceship in this problem we have:
[tex]v=29,960 km/h[/tex] is the linear speed, converted into m/s,
[tex]v=8322 m/s[/tex]
[tex]r=2925 km = 2.925\cdot 10^6 m[/tex] is the radius of the orbit
Subsituting into eq(1), we find the angular speed of the spaceship:
[tex]\omega=\frac{8322}{2.925\cdot 10^6}=0.0028 rad/s[/tex]
b)
When an object is in circular motion, its direction is constantly changing, therefore the object is accelerating; in particular, there is a component of the acceleration acting towards the centre of the orbit: this is called centripetal acceleration, or radial acceleration.
The magnitude of the radial acceleration is given by
[tex]a_r=\omega^2 r[/tex]
where
[tex]\omega[/tex] is the angular speed
[tex]r[/tex] is the radius of the orbit
For the spaceship in the problem, we have
[tex]\omega=0.0028 rad/s[/tex] is the angular speed
[tex]r=2925 km = 2.925\cdot 10^6 m[/tex] is the radius of the orbit
Substittuing into the equation above, we find the radial acceleration:
[tex]a_r=(0.0028)^2(2.925\cdot 10^6)=23.68 m/s^2[/tex]
c)
When an object is in circular motion, it can also have a component of the acceleration in the direction tangential to its motion: this component is called tangential acceleration.
The tangential acceleration is given by
[tex]a_t=\frac{\Delta v}{\Delta t}[/tex]
where
[tex]\Delta v[/tex] is the change in the linear speed
[tex]\Delta t[/tex] is the time interval
In this problem, the spaceship is moving with constant linear speed equal to
[tex]v=8322 m/s[/tex]
Therefore, its linear speed is not changing, so the change in linear speed is zero:
[tex]\Delta v=0[/tex]
And therefore, the tangential acceleration is zero as well:
[tex]a_t=\frac{0}{\Delta t}=0 m/s^2[/tex]
The upward force exerted on an object falling through air is ______.
A. terminal velocity B. momentum
C. air resistance D. weightless
The upward force exerted on an object falling through air is air resistance. The correct option is C.
What is air resistance?When an object moves through air, it creates a force called air resistance. This force basically acts in the inverse way of direction of a body moving via air.
The frictional force of air resistance acts on the moving body. When a body moves, air resistance slows it down.
When an object moves through the air, it encounters air resistance. Resistance varies depending on the velocity, shape, and area of the object. The higher the air resistance, the faster an object moves and the larger its area.
When air pushes against a moving object, it creates air resistance force. Frictional forces include air resistance. Force is always applied against the motion of an object.
Thus, the correct option is C.
For more details regarding air resistance, visit:
https://brainly.com/question/19165683
#SPJ6
What is the magnitude of the acceleration a of the chair? What is the magnitude of the normal force fn acting on the chair?
The magnitude of the normal force and acceleration is calculated using Newton's second law and free body diagrams, considering all forces acting on the object.
Explanation:The question pertains to finding the magnitude of the acceleration and the normal force acting on a chair, block, or similar object using Newton's second law of motion. To determine these quantities, one must analyze the forces acting on the object in a free body diagram and apply the equations of motion. The normal force is the force exerted by a surface to support the weight of an object resting on it, and it acts perpendicular to the surface. To find the normal force (FN), we typically assume static equilibrium if the object is at rest, which implies that the net force in the vertical direction is zero; thus, FN equals the object's weight (mg), where m is the mass and g is the acceleration due to gravity. The magnitude of acceleration (a) can be calculated using the net force acting on the object (resultant force) divided by its mass, as stated by Newton's second law (F = ma).
For example, if a block is placed on a table, the normal force is equal to the gravitational force acting on it (FN = Fg). If the block is accelerating, you would calculate the net force by including all forces acting on the block, such as tension, friction, or applied forces, and then use F = ma to find the acceleration.
The diagram shows a person using a piece of gym equipment to lift weights.
A man sits on a chair with pulleys and a line attached to the side. His leg has the line attached to it and is shown in solid lines with his foot on the floor. His leg is also shown raised with a dotted extension of the line attached to it.
Which best describes the body in terms of simple machines?
The knees are inclined planes, and the lower legs hold the loads. The ankles are the fulcrums.
The lower legs are inclined planes, and the knees hold the loads. The ankles are the fulcrums.
The lower legs are levers, and the knees are fulcrums. The ankles hold the loads.
The knees are levers, and the lower legs are fulcrums. The ankles hold the loads.
Final answer:
In the provided scenario, the correct description of the body in terms of simple machines is that the lower legs are levers and the knees serve as fulcrums.
Explanation:
When we analyze the biomechanics of the body using the piece of gym equipment in the provided scenario, particularly during a leg workout, we can compare the body to a set of simple machines. In this context, the lower legs act as levers.
The knees operate as fulcrums, which are the points about which the levers rotate. The ankles do not carry or hold the load in this action; rather they act as the point of application for the effort when extending the foot in movements like calf raises.
The configuration described is analogous to a first-class lever, where the fulcrum (knee) is situated between the effort (muscles applying force near the ankle) and the load (the resistance on the leg extension machine). Hence, the correct description of the body in terms of simple machines is: "The lower legs are levers, and the knees are fulcrums."
To address the components from the question:
The knees are the fulcrums since they are the pivot point for the motion of the lower leg.
The lower legs are levers because they move around the fulcrum to lift the load on the gym equipment.
The ankles are where the calf muscles apply the effort but are not where the load is held.
Therefore, third option is correct: The lower legs are levers, and the knees are fulcrums. The ankles hold the loads.
Suppose an object is located in deep space, far away from any gravity. Would a force need to be applied in order to accelerate the object in space, or would there be no need for a force to make it accelerate?
Answer:
Force will be needed to make the object move
Explanation:
An object at rest will stay at rest and an object in motion will stay in motion unless acted on by an unbalaced object.
You perform an experiment with a long column of air and a tuning fork. The column of air is defined by a very long vertical plastic tube with a circular cross section; the upper end of the tube is open to the outside air and the lower end of the tube is filled with water. The column of air extends from the top of the water to the open end of the tube; the length of the column can be varied by changing the water level in the lower end of the tube. (The columns of air in this problem are longer than those you will have used in lab; this allows us to imagine the use of lower frequency tuning forks than those you will have used in lab.)
ou are using a tuning fork of frequency 256 Hz. For one particular water level, you hear a loud sound when the fork is struck and positioned just above the open end of the tube. When the water level is lowered by 676 mm, you again hear a loud sound.
(a) What is the wavelength of the 256 Hz sound waves in the column of air? Give your answer in meters, not mm. m
(b) What is the speed of sound in the column of air? m/s
Answer:
[tex]\lambda=4L=1.33m[/tex]
v=343m/s
Explanation:
We have to take into account the expressions
[tex]f=\frac{2n+1}{4}\frac{v_s}{L}\\L=(2n+1)\frac{\lambda}{4}[/tex]
if we assume that 256Hz is the fundamental frequency we have
[tex]f=\frac{1}{4}\frac{v_s}{L}\\\\L=\frac{1}{4}\frac{v_s}{f}=\frac{1}{4}\frac{343\frac{m}{s}}{256Hz}=0.33m[/tex]
and for wavelength
[tex]\lambda=4L=1.33m[/tex]
hope this helps!!
Answer:
a) The wavelength, λ = 1.352 m
b) The speed of the sound in the column air is v = 346.112 m/s
Explanation:
a) Frequency, f = 256 Hz
The water level is lowered by 676 mm. i.e. x = 676 * 10⁻³ m
The length, x, at which the loudest sound will be heard is λ/2
i.e. x = λ/2
Therefore the wavelength of the 256 Hz sound waves in the column air is given by the relation
λ = 2x
λ = 2 * 676 * 10⁻³
λ = 1.352 m
b) The speed of the sound in the column air:
The speed, v, is given by the relation v = f λ
speed, v = 256 * 1.352
v = 346.112 m/s
What is the angular acceleration if the weight is 24.0 cm from the elbow joint, her forearm has a moment of inertia of 0.240 kg⋅m2, and the net force she exerts is 759 N at an effective perpendicular lever arm of 2.00 cm?
The complete question is;
To develop muscle tone, a woman lifts a 2.00-kg weight held in her hand. She uses her biceps muscle to flex the lower arm through an angle of 60.0º . What is the angular acceleration if the weight is 24.0 cm from the elbow joint, her forearm has a moment of inertia of 0.240 kg.m², and the net force she exerts is 759 N at an effective perpendicular lever arm of 2.00 cm?
Answer:
α = 42.76 rad/s²
Explanation:
We are given;
Mass; m = 2 kg
Distance; r = 24cm = 0.24m
Moment of inertia of the forearm; I = 0.24 kg.m²
Muscle Force; F = 759N
Perpendicular distance to lever arm; r' = 2cm = 0.02m
Angle at which she flexes arm; θ =60°
Let's assume that the arm starts extended vertically downwards. and we take the elbow joint as the point about which we calculate the torque.
Thus, we know that torque is given by the formula ;
τ = Force x Perpendicular distance
Thus, the toque exerted by force in the muscle is;
τ_muscle = 759 x 0.02 = 15.18 N.m
Also, torque exerted by the lifted weight is given as 0 because perpendicular distance is zero.
Thus, the net torque on the lower arm is;
τ_net = τ_muscle - τ_weight
τ_net = 15.18 - 0 = 15.18 N.m
Now, let's calculate moment of inertia of lifted weight.
The moment of inertia is given by;
I = mr²
Thus, moment of Inertia of lifted weight is; I_weight = 2 x 0.24² = 0.115 kg.m²
Thus,total moment of inertia is;
I_total = I_arm + I_weight
Thus, I_total = 0.24 + 0.115 = 0.355 kg.m²
Now, we can calculate the angular acceleration.
It's gotten from the equation;
τ_net = I_total•α
Where α is angular acceleration.
Thus making α the subject, we have ; α = τ_net/I_total
α = 15.18/0.355 = 42.76 rad/s²
Explain why sound energy is not a type of potential energy
Final answer:
Sound energy is a form of kinetic energy, not potential energy, because it arises from the motion and vibration of particles within a medium as the sound wave propagates.
Explanation:
Sound energy is not considered a type of potential energy because it is inherently associated with the motion of particles; therefore, it is a form of kinetic energy. Sound is a mechanical wave that results from the vibration of particles within a medium. As these particles oscillate, they transfer energy through the medium, resulting in what we perceive as sound. While a sound wave indeed combines kinetic and potential energy due to the motion of particles and the elasticity of the medium, the propagation of the wave itself and the sound energy we detect are manifestations of kinetic energy. In the case of potential energy, this form of energy is related to an object's position or state; for instance, a rock atop a hill has gravitational potential energy due to its elevated position in a gravitational field. Similarly, the chemical energy in a battery is potential energy based on the chemical composition and potential for a chemical reaction.
To help visualize the concept, consider water behind a dam. The water has potential energy because of its elevated position. As it moves and flows through turbines, it converts this potential energy into kinetic energy, which then can be harnessed to produce electricity. In contrast, when a guitar string is plucked, the energy initially stored in the deformed string is potential energy, but as the string returns to its normal state and vibrates, it generates sound—which is an expression of kinetic energy. Thus, when sound is produced, it is the motion and transfer of energy through a medium, reflecting kinetic, not potential, energy characteristics.
A cross-country skier is skiing along at a zippy 8.0 mis. She stops pushing and simply glides along, slowing to a reduced speed of 6.0 mis after gliding for 5.0 m. What is the magnitude of her acceleration as she slows
Answer:
Acceleration, a = [tex]2.8\ m/s^2[/tex]
Explanation:
Given that,
Initial speed of the skier, u = 8 m/s
Final speed of the skier, v = 6 m/s
Distance, d = 5 m
We need to find the magnitude of her acceleration. It is equal to the rate of change of speed. It is given by :
[tex]v^2-u^2=2as\\\\a=\dfrac{v^2-u^2}{2s}\\\\a=\dfrac{6^2-8^2}{2\times 5}\\\\a=-2.8\ m/s^2[/tex]
So, the magnitude of her acceleration is [tex]2.8\ m/s^2[/tex].
The magnitude of the skier's acceleration as she slows down is 0.4 m/s^2.
Explanation:To find the magnitude of the skier's acceleration, we can use the formula:
Acceleration = (Final Velocity - Initial Velocity) / Time
In this case, the initial velocity is 8.0 m/s, the final velocity is 6.0 m/s, and the time is 5.0 seconds.
Plugging these values into the formula, we get:
Acceleration = (6.0 m/s - 8.0 m/s) / 5.0 s = -0.4 m/s^2
So the magnitude of the skier's acceleration as she slows down is 0.4 m/s^2.
Learn more about acceleration here:
https://brainly.com/question/11789833
#SPJ3
The half-life of caffeine is 5 hours. If you ingested a 30 oz Big Gulp, after how much time will have to pass before you have under 1 oz of caffeine remaining?
Answer:
The time that will have to pass before one has under 1 oz of caffeine remaining is 24.53 hours
Explanation:
Here, we have the formula for half life as follows;
[tex]N(t) = N_0(\frac{1}{2})^{\frac{t}{t_{1/2}}[/tex]
Where:
N(t) = Remaining quantity of the substance = 1 oz
N₀ = Initial quantity of the substance = 30 oz
t = Time duration
[tex]t_{1/2}[/tex] = Half life of the substance = 5 hours
Therefore, plugging in the values, we have
[tex]1= 30(\frac{1}{2})^{\frac{t}{5}}[/tex]
[tex]\frac{1}{30} = (\frac{1}{2})^{\frac{t}{5}}\\ln(\frac{1}{30}) =\frac{t}{5} ln(\frac{1}{2})\\\frac{t}{5} = \frac{ln(\frac{1}{30}) }{ ln(\frac{1}{2})} = 4.91\\ t = 4.91 \times 5 = 24.53 \ hours[/tex]
The time that will have to pass before one has under 1 oz of caffeine remaining = 24.53 hours.
Which type of field is present near a moving electric charge
Answer:
magnetic field is the correct answer.
Explanation:
The magnetic field is produced by the movement of a charge or by current flow and through a magnetized material.magnetic fields are the areas where the objects display a magnetic force and the magnetic fields also affect the neighboring objects.The magnetic field is used as a tool to explain how the magnetic force is distributed inside thing magnetic.What is the measure of how difficult it is for current to flow in a circult?
O A
voltage
B.
resistance
C.
power
D.
energy
Answer:
Resistance
Explanation:
Resistance "resists" the flow of electricity and makes it more difficult to travel. The higher the resistance the less current there is in a circuit. Example being, open circuit (infinity ohms) means there is no current flowing with ohms law.
You need to design a photodetector that can respond to the entire range of visible light. True or False
Answer: True
Explanation:
A photo detector that can respond to the entire rang of visible light can be design, it is true.
Photo detector is a device in an optical receiver which receives optical signals and convert it to electric signal. It is the key device position in front of the optical receiver.
Is the magnetic field created by a current loop uniform?
The magnetic field produced by a current loop is not uniform. It is strongest at the center of the loop and decreases as you move away from the center. This change in strength across the space surrounding the loop makes it non-uniform.
Explanation:No, the magnetic field created by a current loop is not uniform. A current loop means a closed electrical circuit or a current flowing in a loop of conducting wire. When a current flows through the loop, a magnetic field is generated surrounding the loop. This magnetic field is strongest at the center of the loop and diminishes as you move away from the center. This variance in strength implies that the magnetic field is not uniform.
Example:
If you place a compass around a loop with flowing current, you'd notice that the compass needle's direction (which aligns with the magnetic field) changes as you move the compass around. This indicates that the magnetic field strength (and direction) changes across the space surrounding the current loop, which makes it non-uniform.
Learn more about Magnetic field here:https://brainly.com/question/36936308
#SPJ6
Two carts were initially at rest and side-by-side between two photogates. The mass of cart 1 was 0.505 kg. A spring was activated forcing the two carts away from one another, passing through the photogates and producing the readings as shown below. Determine the mass of cart 2.
A person is on an elevator that moves downward at 1.8 m/s². If the person weighs 686 N, what is the net force on the person?
Answer:
Explanation:
Hi
The net force on a person in a descending elevator can be calculated using Newton's second law of motion, considering the person's weight and the elevator's downward acceleration.
The problem relates to Newton's second law of motion, which states that the net force acting on an object is equal to the mass of the object multiplied by its acceleration (F = ma). In the context of a person in a descending elevator, the net force exerted on the person by the floor, sometimes referred to as the normal force, can be found by considering both the gravitational force (weight) acting downwards and the acceleration of the elevator.
Given the person's weight (W) is 686 N and the downward acceleration (a) of the elevator is 1.8 m/s², we can first find the person's mass (m) by rearranging the formula for weight (W = mg), where g is the acceleration due to gravity (9.8 m/s²), giving us m = W/g. Secondly, we can calculate the net force (Fnet) using Newton's second law, taking into account that the actual acceleration of the person is the difference between the acceleration due to gravity and the elevator's acceleration since the elevator is moving downward. Therefore, Fnet = m(g - a).
Net force acting on a person can be calculated as the difference between the force of gravity acting on the person and the force exerted by the elevator. First, calculate the force of gravity: Fg = mg, where m is the mass and g is acceleration due to gravity (9.8 m/s²). Then, calculate the force exerted by the elevator using the equation Fnet = ma, where a is the acceleration of the elevator. Finally, find the net force by subtracting the force of gravity from the force exerted by the elevator.
Chapter 05, Problem 15 Multiple-Concept Example 7 and Concept Simulation 5.2 review the concepts that play a role in this problem. Car A uses tires for which the coefficient of static friction is 0.335 on a particular unbanked curve. The maximum speed at which the car can negotiate this curve is 26.8 m/s. Car B uses tires for which the coefficient of static friction is 0.683 on the same curve. What is the maximum speed at which car B can negotiate the curve?
Answer:
Explanation:
The question relates to motion on a circular path .
Let the radius of the circular path be R .
The centripetal force for circular motion is provided by frictional force
frictional force is equal to μmg , where μ is coefficient of friction and mg is weight
Equating cenrtipetal force and frictionl force in the case of car A
mv² / R = μmg
R = v² /μg
= 26.8 x 26.8 / .335 x 9.8
= 218.77 m
In case of moton of car B
mv² / R = μmg
v² = μRg
= .683 x 218.77x 9.8
= 1464.35
v = 38.26 m /s .
Does a volcanic eruption cause a warming or cooling effect?
Answer:
they have a cooling effect! :)
Explanation:
Answer:
A cooling effect
Explanation:
As strange as it seems, volcanoes cool during eruption. All of the magma pent up in the core gets released into lava, which drastically changes the internal temperatures. This is kind of like how for some people, yelling/beating on inanimate objects helps them to "cool off".
A vertical wire carries a current straight down. What is the direction of magnetic field to the east of this wire?
Explanation:
The direction of magnetic field in a straight wire is given by Maxwell's right hand rule. It states that if the thumb of right hand points towards the direction of electric current, then the curled finger will give the direction of magnetic field.
In this case, a vertical wire carries a current straight down. It means that current will flow in the clockwise direction.
The magnetic field to the east of a vertical wire carrying a current straight down is directed into the page, which is determined by the right-hand rule.
To determine the direction of the magnetic field around a current-carrying wire, we can use the right-hand rule. For a wire that carries a current downward, you would point the thumb of your right hand in the direction of the current (downward), and then your fingers would naturally curl in the direction of the magnetic field. To the east of the wire, your fingers would point into the page, indicating that the magnetic field is directed into the page.
a planet moves around the sun is nearly circular orbit its period of revolution t depends upon
1)radius r of orbit.
2)mass m of the sun.
3) gravitational contact. show dimensionally t^2 proportional to
[tex] {r}^{3} [/tex]
Answer:
t² ∝ r³
Explanation:
Let m be the mass of the sun and m₁ be the mass of the planet and r its distance from the sun. Its gravitational force of attraction equals its centripetal force. So,
Gmm₁/r² = m₁rω² = m₁r(2π/t)² were t is the period of orbit of the planet
Gm/r² = 4π²r/t²
rearranging we ave
t² = (4π²/Gm)r³ since k = 4π²/Gm = constant
t² = kr³ and
t² ∝ r³
Sound moves at a speed of 343 meters per second through air, a gas.
Which pairing is most accurate for how sound will travel through
liquid and solid?
Answer:
need more info
Explanation:
The diagram shows the mechanical parts of scissors
Answer: B. Both involve the use of levers.
Explanation: