an addition polymer, because your continuing the chain
How would the graph change if a catalyst were used? A would decrease. C would decrease. D would decrease. E would decrease.
predict the product for PtCl4 + F2
What are the general properties of the elements in the first two groups on the right side of the modern periodic table?
Compared to the boiling point of 1.0 M KCl(aq) at standard pressure, the boiling point of 1.0 M CaCl2(aq) at standard pressure is
The type of organism likely to suffer the most from the effects of biological magnification is a _____. secondary consumer decomposer tertiary consumer primary consumer
Answer:
tertiary
Explanation:
Magnesium hydroxide is used as an antacid in milk of magnesia and reacts with hydrogen chlrode in the stomach to form water and mageniusm chloride. write out the chemical equation for this reaction with the correct chemical formulas, and balance the equation
NaBr + CaF2 → NaF + CaBr2 What coefficients are needed to balance the chemical equation? A) 1,1,1,1 B) 1,2,1,2 C) 1,2,2,1 D) 2,1,2,1
The correct answer is the D which 2,1,2,1.
Explanation:In a balanced chemical equation, the number of particular atom on the right side of the equation is equal to the number of that atom on the left side of the equation.As in the left side of the equation, there are 2 F atom and 1 Br. While on the right side there are 1 F and 2 Br. S for the balancing, we will put coefficient to the equation.And the equation will be:2NaBr + CaF2 → 2NaF + CaBr2
How much heat (in kj) is released when 3.600 mol naoh(s) is dissolved in water? (the molar heat of solution of naoh is â445.1 kj/mol.)?
Answer : The amount of heat released is, -1602.36 KJ
Explanation : Given,
Moles of NaOH = 3.600 mole
Molar heat of solution of NaOH = -445.1 KJ/mole
Now we have to calculate the amount of heat released.
As, 1 mole of NaOH is dissolved in water then heat released = - 445.1 KJ
So, 3.600 mole of NaOH is dissolved in water then heat released = [tex]-445.1\times 3.600=-1602.36KJ[/tex]
Therefore, the amount of heat released is, -1602.36 KJ
what type of science uses the ph scale
Scientists classify rocks into three different types. What is the main for basis for the classification system they chose?
Rocks are classified into igneous, sedimentary, and metamorphic types based on their formation. Igneous rocks crystallize from magma or lava, sedimentary rocks form from compacted sediments, and metamorphic rocks arise from the alteration of existing rocks under heat and pressure. This classification helps to understand Earth's geological history.
Scientists classify rocks into three different types based on the process of their formation. Each type of rock - igneous, sedimentary, and metamorphic - forms in a unique way, giving us clues about the Earth's history at the time of their formation.
Three Main Categories of Rocks
Igneous rocks form from the cooling and solidification of magma or lava. As the molten material cools, minerals crystallize and interlock.Sedimentary rocks form from the compaction and cementation of sediments, which can be pieces of other rocks or minerals that precipitate out of a solution.Metamorphic rocks are created when pre-existing rocks are transformed under heat and pressure, resulting in new mineral patterns or orientations, known as foliation.
The rock cycle encompasses the transitions between these rock types, including the processes of melting, cooling, erosion, sedimentation, and metamorphism.
AT LEAST 15 POINTS ON CHEMISTRY PLS HELP
what type of reaction is illustrated?
2HBr+Ba(OH)₂ ⇒ BaBr₂ + 2H₂O
A.synthesis
B.decompisition
C.double replacement
Answer:
Definetely a double replacement
Explanation:
The theoretical yield for a reaction is 55.9 g LiCl. The actual yield is 24.6 g LiCl. What is the percent yield of the reaction?
Question options:
227%
44%
25%
56%
How many grams of n2f4 can be produced from 225g f2?
Under what conditions does a precipitate form in an aqueous chemical reaction
Answer : The condition in which precipitation reaction can occur in any aqueous chemical reaction is when the cations of one reactant and the anions of other reactant reacts in aqueous solutions forms an insoluble ionic solid, which is called as "Precipitate".
It is widely known that most of precipitation reactions are formed in a double-replacement reaction. Where one element is displaced by another element of higher reactivity.
Final answer:
A precipitate forms in an aqueous reaction when cations and anions combine to create an insoluble solid, as determined by solubility rules. An example is the reaction between potassium iodide and lead (II) nitrate forming lead (II) iodide. Precipitation reactions are critical both in natural processes and the chemical industry.
Explanation:
Conditions for Precipitate Formation
Precipitates form in aqueous chemical reactions when cations and anions from different compounds combine to create an insoluble ionic solid. This often occurs during what is known as a double-replacement reaction. To determine if a reaction will produce a precipitate, one must consult the solubility rules which provide guidelines about the solubility of various ionic compounds in water.
For example, when aqueous solutions of potassium iodide and lead (II) nitrate are mixed, a precipitation reaction takes place due to the formation of lead (II) iodide, an insoluble solid:
2KI(aq) + Pb(NO₃)₂(aq) → 2KNO₃(aq) + PbI₂(s)The driving force behind such reactions is the creation of an insoluble compound that precipitates out of the solution. These reactions are not only significant in natural processes, like the formation of coral reefs and kidney stones but are also extensively utilized in the chemical industry and in analytical techniques like gravimetric analysis and spot tests.
If 82.3 l of an ideal gas is cooled from 46 degrees calius to -166 what will the volume of the gas become
How many neutrons are in an atom of molybdenum-96 (Mo-96)?
Based on their positions in the periodic table, which of the following elements would you expect to have the highest electronegativity value?
Answer:
Fluorine would likely have the highest electronegativity value.
Explanation:
helppppppppppppppppppppppppppppp
What are the units of molarity?
A. Moles of component/total moles of solution
B. Moles of solute/moles of solutions
C. Moles of solute/kilograms of solvent
D. Moles of solute/liters of solution
Answer:
D. Moles of solute/liters of solution
Explanation:
Is mercury in a thermometer a pure substance or a mixture?
Mercury, as it is present in a thermometer, is classified as a pure substance. It's an element denoted by Hg on the periodic table with a constant composition and properties.
Explanation:The mercury that we find in a thermometer is considered a pure substance rather than a mixture. A pure substance is a form of matter that has a constant composition and properties that are definite throughout the sample. It includes elements and compounds.
Mercury, denoted as Hg on the periodic table, is an element. Therefore, it doesn't consist of different substances mixed together. Its properties, like boiling point and density, remain constant.
Learn more about Mercury in Thermometer here:https://brainly.com/question/34698296
#SPJ6
Help not answers!!! Please.
Chemistry B Semester Final
1. Particles in a gas are best described as ____. (1 point)
• slow-moving, kinetic, hard spheres
• small, hard spheres with insignificant volumes
2. How does the atmospheric pressure at altitudes below sea level compare with atmospheric pressure at sea level? (1 point)
• The atmospheric pressure below sea level is higher.
Some solutions cannot dissolve any more solute. what word is used to describe a solution of this type?
A. Weak
B. Saturated
C. Concentrated
D. Unsaturated
Final answer:
A solution that cannot dissolve any more solute is called a saturated solution. Saturated solutions have reached the maximum concentration of solute that can be dissolved under given conditions. The correct option choice is B: Saturated.
Explanation:
The word used to describe a solution that cannot dissolve any more solute because it has reached its capacity is saturated. A saturated solution has reached the maximum concentration of solute that can dissolve at given conditions. Conversely, an unsaturated solution contains less solute than it can dissolve, which means more solute can be added and dissolved. It's also important to note that a saturated solution can have varying degrees of concentration; some may be dilute if they contain a small amount of solute relative to the solvent, while others may be concentrated with a larger amount of solute.
Cooks use baking soda to make cakes light and fluffy. You might have used baking soda yourself. Baking soda is NaHCO3. A 0.1 M solution of baking soda and water has a [H+] of about 4.0 X 10^-9. (You may prefer to think of the Hydronium ion concentration, [H3O+], as 4.0 X 10-9.) write the formula for the calculation of pH, and then show each job as you calculate the pH of 0.1 M solution of baking soda.,
Answer
is: pH = 8,046.
c(H₃O⁺) = 4·10⁻⁹ M
= 4·10⁻⁹ mol/L = 0,000000004 mol/L.
pH = -logc(H₃O⁺).
pH = -log(4·10⁻⁹ mol/L).
pH = -(-8,046) = 8,046.
When pH is less than seven (pH<7),
solution is acidic.
When is equal seven (pH = 7), solution is
neutral.
When pH is greater than seven (pH >
7), solution is basic (like this example).
The pH of a 0.1 M solution of baking soda is calculated using the formula pH = -log[H+] and is approximately 8.4, indicating a slightly basic solution. Baking soda is a weak base and reacts with acids to produce CO₂, making baked goods light and fluffy.
To calculate the pH of a 0.1 M solution of baking soda (NaHCO₃), you need to use the formula for pH calculation:
pH = -log[H⁺]
Given that the [H+] (or [H₃O⁺]) concentration is 4.0 X 10⁻⁹, the calculation would be as follows:
pH = -log(4.0 X 10⁻⁹)
pH ≈ 8.4
This indicates that the solution is slightly basic, which aligns with baking soda's properties as a weak base.
are these compounds— methane and CH4 ionic or covalent?
Final answer:
Methane (CH4) contains non-polar covalent bonds between its carbon and hydrogen atoms, forming a tetrahedral molecular structure with evenly distributed electron sharing due to sp³ hybridization.
Explanation:
Methane, also known by its chemical formula CH4, is a compound composed of carbon and hydrogen atoms. The bonds between a carbon atom and hydrogen atoms in methane are covalent bonds. Specifically, these are non-polar covalent bonds because the carbon atom, which has four electrons in its outermost valence energy shell, shares a single electron with each of the four hydrogen atoms, which have one valence electron in their first energy shell. The electron distribution is equal among the bonds, resulting in a molecule with a tetrahedral geometry where the carbon atom exhibits sp³ hybridization and serves as the center of the tetrahedron while the hydrogen atoms are located at the corners.
#1: Which element has the same number of energy levels as bromine (Br) and the same number of valence electrons as barium (Ba)?
A. potassium (K)
B,. beryllium (Be)
c. cadmium (Cd)
D. calcium (Ca)
***not too sure on this one... is it D. calcium (Ca) ??,
What is the mass, in grams, of 6.33 mol of nahco3?
if 0.582 moles of zinc reacts with excess lead(IV) sulfate how many grams are zinc sulfate would be produced? can someone help me please?,
What is the maximum amount of kcl that can dissolve in 200 g of water? (the solubility of kcl is 34 g/100 g h2o at 20°c.)?
Answer:
68 grams is the maximum amount of KCl that can be dissolve in 200 g of water.
Explanation:
Let the maximum amount of KCl dissolved in water be x
Solubility of KCl in water = 34g /100 g
This means that 34 g of KCl can be dissolved in 100 g of water at 20°C
Maximum amount of KCl dissolved in 1 g of water = [tex]\frac{34}{100} g[/tex]
Maximum amount of KCl dessolbved in 200 g of water :
[tex]\frac{34}{100}\times 200=68 g[/tex]
68 grams is the maximum amount of KCl that can be dissolve in 200 g of water.
what does mRNA copy and carry the code to produce?
A. DNA
B. proteins
C.gametes
D. organelles
Option B : Protein.
[tex]DNA\overset{Transcription}{\rightarrow}mRNA\overset{Translation}{\rightarrow} Protein[/tex]
The genetic information is stored in DNA which is carried by mRNA (messenger RNA). This genetic information is in the form of three-base code, here each code is used to represent an amino acid. The sequence of amino acid form proteins thus, the correct option is protein.
What is Rubisco and its relationship to photosynthesis?
Rubisco is a super important enzyme in plants that first captures CO2 to begin the process of the Calvin cycle. It's the most important enzyme by far because it starts the entire process of Carbon Fixation.
Rubisco is an essential enzyme in photosynthesis that catalyzes the incorporation of atmospheric carbon dioxide into organic molecules during the Calvin cycle. It can also catalyze a competing reaction with oxygen, leading to photorespiration, which decreases photosynthetic efficiency. Some plants have adapted by developing pathways like the C4 cycle to reduce photorespiration and improve carbon dioxide assimilation.
What is Rubisco?
Rubisco, short for Ribulose-1,5-bisphosphate carboxylase/oxygenase, is an enzyme that is central to the process of photosynthesis. Its main function is to catalyze the first major step of the light-independent reactions, often referred to as the Calvin cycle. During this process, Rubisco facilitates the carboxylation (addition of carbon dioxide) of ribulose bisphosphate (RuBP), a 5-carbon molecule, ultimately leading to the production of glucose and other carbohydrates that plants use for energy.
Relationship to Photosynthesis
Rubisco's role in photosynthesis is twofold. On the one hand, it captures atmospheric carbon dioxide by adding it to RuBP. On the other hand, Rubisco can also react with oxygen instead of carbon dioxide, in a process known as photorespiration. Photorespiration consumes energy and releases fixed carbon dioxide, thus reducing the efficiency of photosynthesis under certain conditions, such as high oxygen concentrations or intense light. To overcome this, some plants have developed adaptations, such as the C4 pathway, which minimizes photorespiration and maximizes the use of carbon dioxidea for the Calvin cycle.
Additional Information
Rubisco is known to be one of the most abundant proteins on earth and is significant in the global carbon cycle. It operates relatively slowly, with a turnover rate of about 2-10 molecules of CO₂ per second. Moreover, it has a tendency to engage in the competing reaction of photorespiration that uses oxygen instead of carbon dioxide. This competing reaction can be a wasteful process as it consumes ATP and carbon skeletons that could otherwise be used for more productive processes within the plant.