What’s 5/10 + 18/100

Final answer:

An incorrect statement about the measure of ∠D would be that it is supplementary to or equal in measure to ∠B, as that conflicts with the properties of a parallelogram where opposite angles are equal and adjacent angles are supplementary.

Explanation:

Given that segment AD is parallel to segment BC, and segment AB is parallel to segment CD, we are dealing with a situation where AD and BC form one pair of parallel lines, and AB and CD form another. This would typically describe a parallelogram, where opposite sides are equal in length and opposite angles are equal in measure.

One statement about the measure of ∠D that is NOT true might suggest that ∠D equals the angles adjacent to it, which would conflict with the properties of a parallelogram. Instead, the measure of ∠D should equal the measure of ∠B, and the angles adjacent to ∠D (∠A and ∠C) should be supplementary to ∠D as they form a linear pair with ∠B and ∠D, respectively.

Therefore, without knowing the exact degrees, the incorrect statement could be that ∠D is supplementary to ∠B (adds up to 180 degrees) or that it is equal in measure to adjacent angles ∠A or ∠C, both of which are false in the context of parallelogram properties.

The measure of ∠D is equal to ∠A.

The statement that is not true about the measure of ∠D is that line B is a decreasing line while line A is an increasing line, with line B being much steeper than line A.

The given information tells us that segment AD is parallel to segment BC, and segment AB is parallel to segment CD. These parallel lines create a series of congruent angles.

Since AD is parallel to BC, the corresponding angles ∠A and ∠D are congruent. Similarly, since AB is parallel to CD, the corresponding angles ∠B and ∠C are congruent as well. Therefore, the measure of ∠D is equal to ∠A.

Answer:

46

Step-by-step explanation:

All I did was add all the numbers and got the answer as 460 you count all the number to get that . Then you divide 460 and 10 to get 46 and then 46 is your answer. Happy to help.

Answer: 46

explanation:

This is the correct answer I promise I just took the

test on K12 and got a 100%

We are given a two-way table that represents the frequency of three types of music.

Hence, the relative frequency table is given by:

                         Female             Male                Total

Country               145/1015         106/1015            251/1015

Rap                     158/1015         240/1015           398/1015

Rock                    214/1015          152/1015            366/1015  

Total                    517/1015           498/1015           1015/1015

                            Female             Male                Total

Country              0.143                 0.104                0.247

Rap                     0.155                0.237                0.392

Rock                    0.211                 0.150                 0.361

Total                   0.509                 0.491                   1

Hence, clearly we could see that the relative frequency of the music country is much low as compared to that of Rock and rap.

Hence, there is a much difference between the bar of Country as compared to Rock and rap.

and there is a low difference between the bar of rock and rap.

Answer: the answer is heat was added to create the product.

Step-by-step explanation:

To calculate the available space for food in the refrigerator, multiply its external dimensions (3 ft wide, 2.5 ft deep, and 6 ft high) to get the total volume of 45 cubic feet. Subtracting the 20 cubic feet taken up by the walls and other parts, we find there are 25 cubic feet left for food storage.

The question asks us to calculate the available space for food inside a refrigerator given its external dimensions and the space taken up by the walls and other parts. The refrigerator is 3 ft wide, 2.5 ft deep, and 6 ft high. The total internal volume before accounting for walls and other parts is calculated by multiplying these dimensions:

Volume = Width × Depth × Height = 3 ft × 2.5 ft × 6 ft = 45 cubic feet.

Given that the walls and parts take up 20 cubic feet, we subtract this from the total internal volume to calculate the space left for food:

Available space for food = Total internal volume - Space taken by walls and parts = 45 cubic feet - 20 cubic feet = 25 cubic feet.

Therefore, the refrigerator has 25 cubic feet of space available for storing food.

Answer:

The base area , radius, and diameter can be determined when given the volume and height of a cone. Substitute the values for the corresponding variables into the formula, and then solve by simplifying and undoing operations to isolate the variable. To find the diameter, double the radius.

Step-by-step explanation:

The formula for the cone is  [tex]\frac{1}{3} \pi r^2 h[/tex]. The cone is a  three-dimensional geometric object with a circular base that tapers to a point called the vertex from a flat base.

It is defined as the three-dimensional shape in which the base is a circular shape and if we go from circular base to top the diameter of the circle reduces and at the vertex, it becomes almost zero.

The volume of a cone is;

[tex]\rm V = \frac{1}{3} \pi r^2 h[/tex]

Where

h is the height of the cone

r is the radius

V is the volume

Hence the formula for the cone is [tex]\frac{1}{3} \pi r^2 h[/tex]

To learn more about the cone refer to the link;

brainly.com/question/16394302

#SPJ3

Answer: 42

Step-by-step explanation:

Call the first number in the sequence xx.

Hint #22 / 8

The next even number in the sequence is x + 2x+2

Hint #33 / 8

The sum of the 66 consecutive even numbers is:

x+ (x + 2)+ (x + 4)+ (x + 6)+ (x + 8)+ (x + 10) = 270x+(x+2)+(x+4)+(x+6)+(x+8)+(x+10)=270

Hint #44 / 8

6x + 30= 2706x+30=270

Hint #55 / 8

6x = 2406x=240

Hint #66 / 8

x = 40x=40

Hint #77 / 8

Since xx is the first number, x + 2x+2 is the second even number.

Hint #88 / 8

Thus, the second number in the sequence is 4242.

Related content

Solution:

we are given that

Airplane has a wingspan of 15 feet.

we have been asked to find the wingspan of a model of the airplane, in inches, if the scale factor is 1:60 .

It mean for each one unit of original wingspan we are supposed to have [tex]\frac{1}{60}th[/tex] times the wingspan of model airplane.

Here the original airplane has a wingspan of 15 feet. So the model airplane has a wingspan of [tex]\frac{1}{60}*15=\frac{1}{4} ft[/tex]

Since one fit=12 inches So we can say

[tex] \frac{1}{4} ft=\frac{12}{4} inches=3 inches.[/tex]

Hence the model airplane has a wingspan of 3 inches.

Final answer:

To unfoil quickly, use the reverse foil method. Identify the first and last terms of each binomial, multiply them, and rewrite the middle term as the sum of the products. Example: (x + 2)(x - 3) = x^2 + 2x - 3x - 6.

Explanation:

To unfoil quickly, you can use a shortcut called the reverse foil method. Reverse foil allows you to quickly determine the original factors of a quadratic expression that has been expanded using the distributive property. Let's say we have the expression (x + 2)(x - 3) and we want to unfoil it. Start by identifying the first term of each binomial, which in this case is x from (x + 2) and x from (x - 3). Multiply these two terms together to get x^2. Then, identify the last term of each binomial, which is 2 from (x + 2) and -3 from (x - 3). Multiply these two terms together to get -6. Finally, rewrite the middle term of the expanded expression as the sum of the two products obtained: (x^2 + 2x - 3x - 6). In this way, you can unfoil the expression quickly and identify the original factors without having to expand it fully.