When light travels from a material with a lower index of refraction to a material with a higher index of refraction, the refracted beam will: a) shift away from the normal b) shift towards the normal

Answers

Answer 1

Answer:

Shift towards the normal

Explanation:

Refraction is defined as the change in direction of light rays when passing through from a medium to another.

The ray can either pass through a less dense medium to a denser medium or from a denser medium to a less dense medium. The light ray bends towards or away from the normal ray(ray perpendicular to the plane) depending whether the travels from less dense to denser or otherwise.

Note that if a ray travels from less dense medium which have a low refractive index like air to a more dense medium like water which have a higher refractive index than air, the refracted ray tends to bend towards the normal, otherwise they bend away from the normal.

Answer 2

Answer:

Shift towards the normal

Explanation:


Related Questions

A mass of 1.0 kg is initially held in place on a ramp of angle 45o at height of 20. meters above the ground. The mass is released and slides to the bottom of the ramp (h=0). There is friction between the mass and the ramp. At the bottom of the ramp, the object has a speed of 10. m/s. The thermal energy was generated by the friction as the mass slides down the ramp is closest to which value?

Answers

Answer:

The thermal energy generated by the friction as the mass slides down the ramp is [tex]\bf{146~J}[/tex].

Explanation:

Given:

The mass of the object is, [tex]m = 1.0~kg[/tex]

The angle of the ramp is, [tex]\theta = 45^{0}[/tex]

The initial height of the object on the ramp is, [tex]h = 20~m[/tex]

The final velocity of the object is, [tex]v = 10~m/s[/tex]

When the object is at rest on the ramp, its total energy is potential energy. When it moves down the ramp its kinetic energy is increased and potential energy is decreased and a part of its energy is lost to overcome the force of friction. Finally, when it is at the bottom of the ramp, its total energy becomes only kinetic energy.

The total energy of the object at a height [tex]20~m[/tex] on the ramp is given by

[tex]E_{1} &=& mgh\\~~~~&=& (1.0~kg)(9.8~m/s^{2})(20~m)\\~~~~&=& 196~J[/tex]

When the object is at the bottom of the ramp, its total energy is given by

[tex]E_{2} &=& \dfrac{1}{2}mv^{2}\\~~~~&=& \dfrac{1}{2}(1.0~kg)(10~m/s)^{2}\\~~~~&=& 50~J[/tex]

So, the energy that is lost as thermal energy is given by

[tex]E &=& E_{1} - E_{2}\\~~~~&=& 196~J - 50~J\\~~~~&=& 146~J[/tex]

I need some help with my science homework about energy, work, and power. It would be greatly appreciated :)

Answers

Answer:

1. B

Explanation:

Work = Force × Distance

Work = 4N × 1.5M

What are the similarities and differences between novae and supernovae?

Answers

Answer:

Explanation:

A novae in astronomy means an explosion in the white dwarf star which had tapped enough gas from a companion star,hence it releases an incredible amount of energy which is Over a million times brighter than it normal stars.

A super novae on the other hand is a cosmic explosion that can be a billion times brighter than the normal.

From this one can see that a perculiar similarity between a novae and super novae is that both generate huge explosion and bright Ness, and a major difference is super novae release huge amount of brightness and energy more than the novae

Suppose you want to make a nested function call (i.e. a call to a function from inside of another function) using a jal rather than a call for performance reasons. How would the push and pop pseudo-ops be proprely ordered along with the jal so that the previous return address isn't lost?
a) pop $ra
jal nested_function_label
nop
push $ra

b) push $ra
jal nested_function_label
nop
pop $ra
c) push $ra
pop $ra
jal nested_function_label
nop
d) jal nested_function_label
nop
pop $ra
push $ra

Answers

Answer:

As we need to use a nested loop in our function,hence push $ra

pop $ra

jal nested_function_label

nop is the correct option.

Consider a coin which is tossed straight up into the air. After it is released it moves upward, reaches its highest point and falls back down again. Air resistance can be neglected. What force acts on the coin while it moves upward after it is released

Answers

Answer:

GRAVITATIONAL FORCE

Explanation:

We may have noticed that a body thrown upward in air falls back down again after attaining a particular height. The object was able to fall down back due to the effect of gravity acting on it. If there are no force of gravity acting on the body, the body will not fall back but rather disappears into the thin air.

A coin tossed upward in the air which falls back down when released is therefore under the influence of gravity i.e GRAVITATIONAL FORCE while it moves upward after it is released

How do the magnetic poles of earth serve to protect life on earth?

Answers

Answer:

The block solar winds and other harmful things

Explanation:

The Earth's magnetic field serves to deflect most of the solar wind, whose charged particles would otherwise strip away the ozone layer that protects the Earth from harmful ultraviolet radiation.

Answer:

Explanation:The Earth's magnetic field serves to deflect most of the solar wind, whose charged particles would otherwise strip away the ozone layer that protects the Earth from harmful ultraviolet radiation. One stripping mechanism is for gas to be caught in bubbles of magnetic field, which are ripped off by solar winds.

Technician A says a pull to the right during braking could be caused by a defective metering valve. Technician B says a pull to the left could be caused by a defective proportioning valve. Which technician is correct

Answers

Answer:

The correct option is;

Neither A nor B

Explanation:

The common cause of a vehicle pulling to the right or to the left during braking is due to a contaminated breaking surface or a faulty caliper. Other causes include tire size variation or worn out suspension components.

Other causes include;

Leaking break fluid

Piston frozen in wheel cylinder or caliper  

Adjuster of rear break

Tire fault.

As soon as it is observed that the vehicle pulls on one side when braking, the vehicle should should be taking for checks by a qualified mechanic as soon as possible.

Final answer:

Both Technician A and B are incorrect, as a pull during braking is more likely due to uneven brake pad wear, sticking calipers, or collapsed brake lines rather than a defective metering or proportioning valve.

Explanation:

The question relates to whether a pull to the right during braking could be caused by a defective metering valve, and whether a pull to the left could be caused by a defective proportioning valve. Neither of these assertions is typically accurate.

A metering valve is designed to ensure that the rear brakes engage just after the front brakes, to prevent rear wheel lockup during early brake application. A proportioning valve adjusts the pressure between the front and rear brakes to prevent the rear wheels from locking up during heavy braking. Neither valve is designed to balance the braking force from side to side.

A pull to one side during braking is more likely to be caused by uneven brake pad wear, sticking calipers, or a collapsed brake line, rather than issues with the metering or proportioning valves. Therefore, both Technician A and Technician B are incorrect regarding the cause of a pull during braking.

Calculate the electrical energy expended in a device across which the circuit voltage drops by 20.0 volts in moving a charge of 4 coulombs.
A)5 J
B)80 J
C)0.2 J

Answers

Answer:

The answer is 80 Joules

Explanation:

Electrical energy = Q x V

Energy = 2 x 40

= 80

I just took the test and it was right :D

The correct answer is B.

I hope this helped! :D

If a wave has a speed of 100 m/s and a wavelength of 20 meters, what is the frequency?

Answers

Answer:

Frequency 5hz

Explanation:

Final answer:

To calculate the frequency of a wave with a speed of 100 m/s and a wavelength of 20 meters, divide the speed by the wavelength, resulting in a frequency of 5 Hz.

Explanation:

To find the frequency of a wave when you know its speed and wavelength, you can use the formula: speed = (wavelength) x (frequency). Rearranging this formula to solve for frequency gives us frequency = speed / wavelength. In this case, with a wave speed of 100 m/s and a wavelength of 20 meters, the calculation would be frequency = 100 m/s / 20 m.

Therefore, the frequency of the wave is 5 Hz. This means the wave completes 5 cycles per second.

A 1-kg rock is suspended from the tip of a horizontal meterstick at the 0-cm mark so that the meterstick barely balances like a seesaw when its fulcrum is at the 12.5-cm mark. From this information, the mass of the meterstick is _________.
A) 1/4 kg.B) 1/2 kg.C) 3/4 kg.D) 1 kg.E) none of the above

Answers

Explanation:

Given that,

Mass if the rock, m = 1 kg

It is  suspended from the tip of a horizontal meter stick at the 0-cm mark so that the meter stick barely balances like a seesaw when its fulcrum is at the 12.5-cm mark.

We need to find the mass of the meter stick. The force acting by the stone is

F = 1 × 9.8 = 9.8 N

Let W be the weight of the meter stick. If the net torque is zero on the stick then the stick does not move and it remains in equilibrium condition. So, taking torque about the pivot.

[tex]9.8\times 12.5=W\times (50-12.5)\\\\W=\dfrac{9.8\times 12.5}{37.5}[/tex]

W = 3.266 N

The mass of the meters stick is :

[tex]m=\dfrac{W}{g}\\\\m=\dfrac{3.266}{9.81}\\\\m=0.333\ kg[/tex]

So, the mass of the meter stick is 0.333 kg.

Final answer:

The mass of the meterstick is calculated using the principle of torque balance. The meterstick must have a mass that creates an equal opposite torque to the one created by the 1-kg rock. The calculation shows that the meterstick has a mass of 1/3 kg, which is not listed in the options, so the answer is (E) none of the above.

Explanation:

The mass of the meterstick can be found using the principle of moments, also known as the principle of leverage, which states that for an object to be in rotational equilibrium, the sum of the clockwise moments about the pivot (fulcrum) must equal the sum of the counterclockwise moments. In this case, the 1-kg rock is hanging from the 0-cm mark and the meterstick balances when the fulcrum is at the 12.5-cm mark. The torque created by the 1-kg mass is given by its mass multiplied by its distance from the fulcrum, or 1 kg × 12.5 cm.

For the meterstick to balance, its center of mass must be located directly above the fulcrum. Since the meterstick is uniform, its center of mass is in the middle, at the 50-cm mark. This means that the mass of the meterstick acts 50 cm - 12.5 cm = 37.5 cm away from the fulcrum. Let's denote the mass of the meterstick as 'M'. The counterbalance torque provided by the meterstick is given by M kg × 37.5 cm.

Setting the torques equal for a balanced system:
M kg × 37.5 cm = 1 kg × 12.5 cm, which simplifies to M = 1/3 kg. Since 1/3 kg is equivalent to approximately 0.33 kg, the correct answer is (E) none of the above, as none of the provided options matches this result.

Learn more about torque balance here:

https://brainly.com/question/17014679

#SPJ3

How many steps in glycolysis have atp as a substrate or product?

Answers

Answer:

4

Explanation:

1. Phosphorylation of Glucose

2. Production of Fructose-6 Phosphate

3. Production of Fructose 1, 6-Diphosphate

4. Splitting of Fructose 1, 6-Diphosphate

5. Interconversion of the Two Sugars

6. Formation of NADH and 1,3-Diphoshoglyceric acid

7. Production of ATP and 3-Phosphoglyceric Acid

8. Relocation of Phosphorus Atom

9. Removal of Water

10. Creation of Pyruvic Acid and ATP

The process of breaking down glucose into pyruvate while oxygen is present is known as glycolysis.

Thus, It is a multi-step process that the cytoplasm's many enzymes catalyze. It is recognized as the initial stage of the cellular respiration process that all living things go through.

Glucose is converted to glyceraldehyde-3-phosphate during the preliminary phase, and glyceraldehyde-3-phosphate is converted to pyruvate during the pay-off phase.

The glycolysis process produces the chemicals NADH and ATP. The ten steps of glycolysis include the partial oxidation of glucose to pyruvic acid.

Thus, The process of breaking down glucose into pyruvate while oxygen is present is known as glycolysis.

Learn more about Glycolysis, refer to the link:

https://brainly.com/question/2699075

#SPJ2

Susan's 12.0 kg baby brother Paul sits on a mat. Susan pulls the man across the floor using a rope that is angled 30 degree above the floor. The tension is a constant 29.0 N and the coefficient of friction is 0.210. Use work and energy to find Paul's speed after being pulled 2.90 m.

Answers

Answer:      

Paul speed after being pulled 2.9 m is 2.68m/s.

Explanation:

The work energy theorem, change in kinetic energy of the object  from initial position to the final position is equal to the work done on the object ie when the force is applied on  the object the object changes its position and work is done on the object.

According to the law of conservation of energy ,

ΔE = W,  eqn 1

where ΔE  is the change in object energy

          W is the all the work done on the object.

Work done is written as W =F dcosθ

Where F is the force,

           d is the distance,

            θ is the angle between the force and displacement vector.

From the figure given below,

The work of friction is given by W₁  = F₁ d cos180°

The work of  pulling force is given by W₂ =F₂ dcos 30°

Change in object energy  ΔE = mv²/2.

Applying Newton first law along Y axis,

Fsin30° + N =mg

Normal force N =mg - Fsin30°

Frictional Force F₁ =μN =μ(mg - Fsin30°)

Substituting in eqn 1

mv²/2 = F₂ dcos 30°+ μ(mg - Fsin30°)d cos180°

          =[tex]\frac{\sqrt{3} }{2}[/tex] F₂ d -  μ(mg - [tex]\frac{F}{2}[/tex])d

v² = [tex]\sqrt{3}[/tex] [tex]\frac{F}{m}[/tex]d - 2μgd +

here m  = 12 kg,

        d = 2.9 m.

        μ = 0.21

        F = 29 N

Sub all values,              

v² =  7.2

v = 2.68m/s

Paul speed after being pulled 2.9 m is 2.68m/s.

donna is attempting to make an electromagnet to pick up old nails in and around her driveway. which of these materals would be best to use the core in order to make the strongest electromagnet to pick up the most nails

Answers

Answer:

D. Iron nail

Explanation:

what does a electric field of two positive charges look like

Answers

Hope this helped you

:)

Have a great day!

he graph shows all of the stable isotopes of elements according to the numbers of protons and neutrons in their nuclei.


A graph titled zone of nuclear stability with number of protons from 0 to 80 on the x-axis with number of neutrons on the y-axis from 0 to 140. There are two lines, one with a slope of 1 from (0, 0). The other line has points of (20, 24), (40, 52) and (60, 120) labeled stability zone.


Which statements are supported by the graph? Check all that apply.


A. For large atoms, more neutrons than protons are needed to be stable.

B. Nuclei that have 90 or greater protons are always radioactive.

C. Atoms must have equal numbers of protons and neutrons to be stable.

D. Atoms that have less than 10 protons do not need neutrons to be stable.

Answers

Answer:

A and B i think

Explanation:

(A) For large atoms, more neutrons than protons are needed to be stable.

(B) Nuclei that have 90 or greater protons are always radioactive.

Stability of nucleus of an atom

A stable nucleus of an atom must have nutron-to-proton ratio of at least one. This implies that the nucleus must have more neutrons than protons.

From the graph we can conclude the following about stability of nucleus of an atom;

For large atoms, more neutrons than protons are needed to be stable.Nuclei that have 90 or greater protons are always radioactive.

Learn more about stability of nucleus here: https://brainly.com/question/1729336

#SPJ2

A man driving a car traveling at 30m/s slams on the brakes and accelerates in the negative direction at 4.75 m/s2, how far does the car travel before it stops?

Answers

Answer:

94.73 meters.

Explanation:

Using SUVAT.

s = ?

u = 30

v = 0

a  = -4.75

t = ?

[tex]v^{2}=u^2+2as\\0=30^2+2(-4.75)s\\\\900=9.5s\\s = 94.73[/tex]

The car will travel approximately 94.74 meters before it stops.

To answer this question, we can use the equations of motion.

When the car stops, its final velocity will be 0 m/s.

We can use the equation v^2 = u^2 + 2as,

where v is the final velocity,

u is the initial velocity,

a is the acceleration, and

s is the distance.

Plugging in the values, we have (0)^2 = (30)^2 + 2(-4.75)s.

Solving for s, we get s = 900/9.5, which is approximately 94.74 meters.

Therefore, the car will travel approximately 94.74 meters before it stops.

Learn more about Distance traveled by a car when braking here:

https://brainly.com/question/33499751

#SPJ2

Recently, astronomers have observed stars and other objects that orbit the center of the Milky Way Galaxy farther out than our Sun, but move around faster than we do. How do astronomers think such an observation can be explained?

Answers

Answer:

That scenario can be explained by the idea of the contribution of dark matter on that point.

Explanation:

It can be explained through the idea of dark matter, this one was born to explain why stars (or any object) that were farther for the supermassive black hole in the center of the Milky Way galaxy didn't decrease it rotational velocity as it was expected according to equation 1.

[tex]v = \sqrt{\frac{G M}{r}}[/tex]  (1)

Where v is the rotational velocity, G is the gravitational constant, M is the mass of the supermassive black hole, and r is the orbital radius.

Notice, that If the distance increases the orbital speed decreases (inversely proportional).

Final answer:

Astronomers explain the high velocities of stars orbiting the Milky Way's center outside our Sun's orbit by the gravitational influence of dark matter. This halo of invisible matter adds mass to the galaxy, affecting the orbital speeds in accordance with Kepler's third law.

Explanation:

Astronomers have observed that stars and other objects orbiting the center of the Milky Way Galaxy farther out than our Sun move around faster than we do, which is an unexpected observation according to Kepler's third law. Typically, as per Kepler's third law, we would expect objects that are farther from the center of mass to orbit more slowly. However, the presence of invisible matter, which we now understand as dark matter, affects the gravitational pull and thus the orbital velocities of these outer objects, leading them to move at unexpectedly high speeds.

The Milky Way is surrounded by a halo of this invisible matter, which does not emit or reflect light, making it undetectable through traditional means. Instead, its presence is inferred from its gravitational effects on the motions of stars and gas in the galaxy. The observations mentioned, where objects beyond the luminous part of the Milky Way are moving faster than expected, provide evidence for the existence of dark matter, as this additional mass can account for the higher orbital velocities.

what is the difference between condensation and conduction

Answers

Answer:

Convection is the heat transfer due to the bulk movement of molecules within fluids such as gases and liquids, including molten rock. Condensation is the process by which water vapor in the air is changed into liquid water. Condensation is crucial to the water cycle because it is responsible for the formation of clouds. These clouds may produce precipitation, which is the primary route for water to return to the Earth's surface within the water cycle.

Explanation:

Their a difference....... A huge One

Condensation is the transition from gas to liquid, whereas conduction is a form of heat transfer through direct contact between objects.

The difference between condensation and conduction lies in their definition and the processes they describe. Condensation is a phase change in which a substance transitions from a gaseous state to a liquid state, often as a result of cooling. It is not directly related to heat transfer but is a thermodynamic process. On the other hand, conduction is a mode of heat transfer where thermal energy is transmitted through stationary matter due to physical contact, as when heat from an electric burner moves to the bottom of a pan.

Examples of conduction include the warming of a glass when holding it in a warm hand or the transfer of heat from a stove's burner to a pan. Convection is another mode of heat transfer involving the movement of fluids, which plays an important role in weather systems and heating systems. In contrast, conduction relies on direct contact between objects for heat to be transferred.

The function x = (5.2 m) cos[(5πrad/s)t + π/5 rad] gives the simple harmonic motion of a body. At t = 5.3 s, what are the (a) displacement, (b) velocity, (c) acceleration, and (d) phase of the motion? Also, what are the (e) frequency and (f) period of the motion?

Answers

Answer:

(a) Displacement = - 3.0576 m

(b) Velocity  [tex]=-66.48[/tex] m/s

(c)Acceleration   = -753.39 m²/s

(d)The phase motion is 26.7 [tex]\pi[/tex].

(e)Frequency =2.5 Hz.

(f)Time period =0.4 s

Explanation:

Given function is

[tex]x= (5.2 m)cos[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

(a)

The displacement includes the parameter t, so,at time t=5.3 s

[tex]x|_{t=5.3}= (5.2 m)cos[ (5\pi \ rad/s)5.3+ \frac\pi5][/tex]

           [tex]= (5.2 m)cos[ 26.5\pi+ \frac\pi5][/tex]

           =(5.2)(-0.588)m

           = - 3.0576 m

(b)

[tex]x= (5.2 m)cos[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

To find the velocity of simple harmonic motion, we need to find out the first order derivative of the function.

[tex]v=\frac{dx}{dt}[/tex]

 [tex]=\frac{d}{dt} (5.2 m)cos[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

  [tex]= (5.2 m)(-5\pi)sin[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

  [tex]= -26\pi sin[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

Now we can plug our value t=5.3 into the above equation

[tex]v= -26\pi sin[ (5\pi \ rad/s)5.3\ s+ \frac\pi5][/tex]

 [tex]=-66.48[/tex] m/s

(c)

To find the acceleration of simple harmonic motion, we need to find out the second order derivative of the function.

[tex]v= -26\pi sin[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

[tex]a=\frac{d^2x}{dt^2}[/tex]

 [tex]=\frac{dv}{dt}[/tex]

 [tex]=\frac{d}{dt}( -26\pi sin[ (5\pi \ rad/s)t+ \frac\pi5])[/tex]

 [tex]= -26\pi (5\pi)cos[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

 [tex]= -130\pi^2cos[ (5\pi \ rad/s)t+ \frac\pi5][/tex]

Now we can plug our value t=5.3 into the above equation

[tex]a= -130\pi^2cos[ (5\pi \ rad/s)5.3 \ s+ \frac\pi5][/tex]

  = -753.39 m²/s

(d)

The general equation of SHM is

[tex]x=x_mcos(\omega t+\phi)[/tex]

[tex]x_m[/tex] is amplitude of the displacement, [tex](\omega t+\phi)[/tex] is phase of motion, [tex]\phi[/tex] is phase constant.

So,

[tex](\omega t+\phi)=5\pi t+\frac\pi5[/tex]

Now plugging t=5.3s

[tex](\omega t+\phi)=5\pi \times 5.3+\frac\pi5[/tex]

             =26.7 [tex]\pi[/tex]

The phase motion is 26.7 [tex]\pi[/tex].

The angular frequency [tex]\omega = 5\pi[/tex]

(e)

The relation between angular frequency and frequency is

[tex]\omega =2\pi f[/tex]

[tex]\therefore f=\frac{\omega}{2\pi}[/tex]

     [tex]=\frac{5\pi}{2\pi}[/tex]

    [tex]=\frac52[/tex]

   = 2.5 Hz

Frequency =2.5 Hz.

(f)

The relation between frequency and time period is

[tex]T=\frac1 f[/tex]

   [tex]=\frac1{2.5}[/tex]

  =0.4 s

Time period =0.4 s






The speed of propagation equals the frequency times the wavelength.
O
True
O
False​

Answers

Answer:

true

Explanation:

because I say it's true

Answer:help me with my physics please

Explanation:

How much time would it take to exert 700W of power while doing 700J of work?​

Answers

Answer:

The answer to your question is time = 1 s

Explanation:

Data

time = ?

Power = 700 W

Work = 700 J

Power is defined as the work done per unit of time.

Formula

Power = Work / Time

-Solve for time

Time = Work/Power

-Substitution

Time = 700 / 700

-Result

Time = 1 s

Conclusion

In 1 second and with 700 J there will be produced 700 watts

When different resistors are connected in parallel across an ideal battery, we can be certain that...

Answers

Answer:

Explained Below.

Explanation:

Whenever the different resistors are fixed parallel along with an ideal battery , we can be certain that it carries the same potential difference across each of them.

And potential difference is nothing but the energy that charge moves with. It can also be denoted as (p.d.) and potential difference is been calculated as volts that is been denoted as (V).

Which statement best describes what happens when a sound source is moving? (1 point)

Grupo de opciones de respuesta

As the sound source approaches the observer, the pitch decreases and continues to do so as it passes the observer.

As the sound approaches the observer, the pitch increases; as it passes the observer, the pitch decreases.

As the sound source approaches the observer, the pitch decreases; as it passes the observer, the pitch increases.

As the sound source approaches the observer, the pitch increases and continues to do so as it passes the observer.

Answers

Answer:

As the sound approaches the observer, the pitch increases; as it passes the observer, the pitch decreases.

Explanation:

The crests come closer when it approaching, and go farther when the source passes the observer.

Consider a loop of wire whose plane is horizontal and that carries a current in the clockwise direction when viewed from above. If we were to represent the current loop as a bar magnet or magnetic dipole, in what direction would the north pole be pointing?

Answers

Answer:

Downwards into the plane

Explanation:

Solution:-

- This is a conceptual application of  hand rule. We will place our palm fingers open vertical to a plane surface. Then curl our fingers in and naturally point the thumb.

- The direction of curl of fingers denotes the direction of of current flow in the coil. Which in our case is "clockwise direction". We will orient/invert our right hand palm in such a way that we curl our fingers in clockwise fashion. Then stick the thumb out to give us the direction of magnetic field or North pole end. In our case the the thumb points downwards into the plane denoting that the magnetic field within the loop is also acting downwards into the plane.

- The bar magnet would be placed in such a way that North pole is pointing downward into the plane in the direction of magnetic field and end up at south pole pointing up out of the plane.

A source of emf is connected by wires to a resistor, and electrons flow in the circuit. The wire diameter is the same throughout the circuit. Compared to the drift speed of the electrons before entering the source of emf, the drift speed of the electrons after leaving the source of emf is __________.A. faster. B. slower. C. the same. D. either A or B depending on circumstances. E. any of A, B, or C depending on circumstances.

Answers

Answer:

C. the same.

Explanation:

The drift speed of electrons in a circuit is the same all through the circuit.

Final answer:

The drift speed of the electrons remains the same before and after they pass through the source of emf because the current is constant throughout the circuit assuming a steady state situation. The emf source does not affect the drift speed despite functioning like a pump that maintains the potential difference.

Explanation:

The drift speed of the electrons after leaving the source of emf is the same as before entering it. This is so because, in a steady-state situation where the current is constant throughout a circuit, the rate at which electrons enter any given section of the circuit must equal the rate at which they exit. The drift speed is the average speed of the electrons as they move through the conductor, and it remains constant throughout the entirety of the circuit assuming the diameter of the wire is consistent.

It's important to understand that the emf source acts like a pump, helping move the electrons through the circuit and maintaining a potential difference. However, this doesn't result in an increase in the electron drift speed, as the overall velocity of the electron stays steady. Even in the presence of an electric field, the phenomenon known as drift velocity remains unaffected due to the near-random movements of the free electrons caused by their collisions with atoms and other free electrons.

Learn more about Drift Speed of Electrons here:

https://brainly.com/question/30881409

#SPJ11

The photoelectric effect can be thought of as a simple function: light is an input, and electrons, which produce electricity, are the output. The model in this interactive is missing a few parts to harness this electricity effectively, what are they?

Answers

Answer:

(1) Conductive medium (2) Load.

Explanation:

Electricity is essentially Flow of electrons in conductive medium such as wire and to harness it there needs to be a load in the circuitry to use up the energy of the moving electrons through the wire.

this is how solar cells work, in them there are Silicon P and N Junctions connected in series and parallel ( quite alot of them) forming a large plate , which then can be connected to a load through wires to harness electricity produced.

A helium balloon containing 5m³ of gas at a pressure of 30kPa is released into the air. Assuming that the temperature is constant calculate the volume the balloon would have when the pressure inside the balloon has fallen to 5kPa. Answer in m³.

Answers

Answer:

30 m³

Explanation:

Parameters given:

Initial volume of helium, V1 = 5 m³

Initial pressure in balloon, P1 = 30 kPa

Final pressure, P2 = 5 kPa

To find the volume of the balloon at that volume, we apply Boyle's law.

It states that at constant temperature, the pressure of a gas is inversely proportional to the volume of the gas.

Mathematically:

P = k / V

Where k = constant of proportionality

This implies that:

P * V = k

This means that if the pressure or volume of the gas changes at the same temperature, the product of the pressure and volume would be the same:

Hence:

P1 * V1 = P2 * V2

Hence, to find the final volume:

30 * 5 = 5 * V2

=> V2 = (30 * 5) / 5

V2 = 30 m³

The volume of the gas when the pressure is 5 kPa is 30 m³.

A student waiting on a platform for an incoming train hears a train whistle blow some place down the track but she is not certain from which direction it came. If the student notices that the frequency of the train whistle slowly decreases. What can the student conclude about the speed and direction of the train blowing the whistle

Answers

Answer:

Considering the two cases of when the train is moving towards and away from the stationary observer. The observed frequency of sound waves from the train can decrease when

1) The speed of the train is slowly reducing and its direction is towards the stationary observer.

2) The speed of the train is slowly increasing and its direction is away from the observer for the sound's observed frequency to keep decreasing.

Explanation:

This phenomenon is due to Doppler's Effect.

Doppler's Effect explains how relative frequency of a sound source varies with the velocity of the source or the observer.

Generally, the mathematical expression for Doppler's Effect is given below

f' = f [(v + v₀)/(v - vₛ)]

where

f' = observed frequency

f = actual frequency

v = velocity of sound waves

v₀ = velocity of observer

vₛ = velocity of sound source

When the train is moving towards the stationary observer,

f' = observed frequency of the sound wave = f₁

f = actual frequency of the sound wave = f

v = velocity of sound waves = v

v₀ = velocity of observer = 0 m/s

vₛ = velocity of sound source = vₛ

f' = f [(v + v₀)/(v - vₛ)]

f₁ = f [(v + 0)/(v - vₛ)]

f₁ = fv/(v - vₛ) (eqn 1)

Observed frequency is obviously higher than the frequency of the train.

But if the train keeps reducing its speed (vₛ) towards from the stationary observer, the observed frequency will decrease.

When the train is moving away from the stationary observer,

f' = observed frequency of the sound wave = f₂

f = actual frequency of the sound wave = f

v = velocity of sound waves = v

v₀ = velocity of observer = 0 m/s

vₛ = velocity of sound source = - vₛ (train is moving away from the observer, hence, the negative sign)

f' = f [(v + v₀)/(v - vₛ)]

f₂ = f [(v + 0)/(v - (-vₛ)]

f₂ = fv/(v + vₛ) (eqn 2)

From the expression, it is clear that the observed frequency is smaller than the frequency of the sound waves and it keeps decreasing as the speed of the train (vₛ) increases as the train moves away from the stationary observer.

Hope this Helps!!!

Answer:

The student can conclude that the speed of the train is increasing while the direction of the train is away from her or him

Explanation:

Here we have the Doppler effect given by

For an approaching wave

[tex]F_{obs} =\left [ \frac{v}{v - v_{source}} \right ] f_{source[/tex]

For a receding wave we have

[tex]F_{obs} =\left [ \frac{v}{v + v_{source}} \right ] f_{source[/tex]

Therefore, comparing the denominators of the two equation, it is seen that the frequency heard by the observer is decreases for a receding wave.

That is the student can conclude that the train is moving away from her or him or that the speed of the train is increasing while the direction of the train is away from her or him.

Quasar spectra often show many absorption lines that all appear to be as a result of the same electron transition (such as level 1 to level 2 in hydrogen) but that fall at different wavelengths in the spectrum. Why do we think this is the case?

Answers

Answer: Because of different redshift of cloud.

Explanation:

We are seeing absorption lines from clouds of gas that lie between us and the quasar, and therefore each cloud has a different redshift.

A quasar's spectrum is hugely redshifted. And most astronomers think this large redshift tells us about the distance to the quasar.

Three different planet-star systems, which are far apart from one another, are shown above. The masses of the planets are much less than the masses of the stars.
In System A , Planet A of mass Mp orbits Star A of mass Ms in a circular orbit of radius R .

In System B , Planet B of mass 4Mp orbits Star B of mass Ms in a circular orbit of radius R .

In System C , Planet C of mass Mp orbits Star C of mass 4Ms in a circular orbit of radius R .
(a) The gravitational force exerted on Planet A by Star A has a magnitude of F0 . Determine the magnitudes of the gravitational forces exerted in System B and System C .

___ Magnitude of gravitational force exerted on Planet B by Star B

___ Magnitude of gravitational force exerted on Planet C by Star C
(b) How do the tangential speeds of planets B and C compare to that of Planet A ? In a clear, coherent paragraph-length response that may also contain equations and/or drawings, provide claims about

why the tangential speed of Planet B is either greater than, less than, or the same as that of Planet A , and
why the tangential speed of Planet C is either greater than, less than, or the same as that of Planet A .

Answers

a) 4F0

b) Speed of planet B is the same as speed of planet A

Speed of planet C is twice the speed of planet A

Explanation:

a)

The magnitude of the gravitational force between two objects is given by the formula

[tex]F=G\frac{m_1 m_2}{r^2}[/tex]

where

G is the gravitational constant

m1, m2 are the masses of the 2 objects

r is the separation between the objects

For the system planet A - Star A, we have:

[tex]m_1=M_p\\m_2 = M_s\\r=R[/tex]

So the force is

[tex]F_A=G\frac{M_p M_s}{R^2}=F_0[/tex]

For the system planet B - Star B, we have:

[tex]m_1 = 4 M_p\\m_2 = M_s\\r=R[/tex]

So the force is

[tex]F=G\frac{4M_p M_s}{R^2}=4F_0[/tex]

So, the magnitude of the gravitational force exerted on planet B by star B is 4F0.

For the system planet C - Star C, we have:

[tex]m_1 = M_p\\m_2 = 4M_s\\r=R[/tex]

So the force is

[tex]F=G\frac{M_p (4M_s)}{R^2}=4F_0[/tex]

So, the magnitude of the gravitational force exerted on planet C by star C is 4F0.

b)

The gravitational force on the planet orbiting around the star is equal to the centripetal force, therefore we can write:

[tex]G\frac{mM}{r^2}=m\frac{v^2}{r}[/tex]

where

m is the mass of the planet

M is the mass of the star

v is the tangential speed

We can re-arrange the equation solving for v, and we find an expression for the speed:

[tex]v=\sqrt{\frac{GM}{r}}[/tex]

For System A,

[tex]M=M_s\\r=R[/tex]

So the tangential speed is

[tex]v_A=\sqrt{\frac{GM_s}{R}}[/tex]

For system B,

[tex]M=M_s\\r=R[/tex]

So the tangential speed is

[tex]v_B=\sqrt{\frac{GM_s}{R}}=v_A[/tex]

So, the speed of planet B is the same as planet A.

For system C,

[tex]M=4M_s\\r=R[/tex]

So the tangential speed is

[tex]v_C=\sqrt{\frac{G(4M_s)}{R}}=2(\sqrt{\frac{GM_s}{R}})=2v_A[/tex]

So, the speed of planet C is twice the speed of planet A.

Other Questions
On August 1, Ernie wrote to Elsie offering to sell Elsie his car for $7,600, and he promised to hold the offer open for ten days. On August 4 Ernie changed his mind; he sent Elsie a letter revoking the offer. On August 5 Elsie e-mailed Ernie, accepting the offer. Ernies letter of revocation arrived on August 6. Is there a contract? Explain. Which software program allows the user to create Flash presentations in a simplified manner?OA. BlinklistOB. SwishOC. PowerPointOD. Simpy Which of the following motions is least like an earthquake wave? In Spanish How is the verb stem that is used to conjugate a verb in the future perfect different than that of verbs in the present, preterit or imperfect tenses? Is it similar to the conditional mood? Humans start from a single cell. Eventually, as cells divide, they start to differentiate, or specialize. Some cells are specialized for movement of the human body. What type cells would these be? How might the images and methods used by e-cigarette companies to market their products mislead people into thinking they are safe? Use specific examples to support your answer. Jeremy Corporation estimated manufacturing overhead costs for the year to be $ 550 comma 000. Jeremy also estimated 8 comma 000 machine hours and 3 comma 000 direct labor hours for the year. It bases the predetermined overhead allocation rate on machine hours. On January 31, Job 25 was completed. It required 5 machine hours and 1 direct labor hours. What is the amount of manufacturing overhead allocated to the completed job? What is the central idea of this passage? A) America no longer needs an Electoral College system. B) Voters must take seriously the responsibility to vote. C) College graduates agree with the Electoral College system. D) American presidents are in support of the Electoral College system.STORY: Every four years, millions of people head to the polls on Election Day to vote for a new president. It is their right and duty as U.S. citizens to do so. In the months before the election, they watch the candidates argue about important issues. They read articles about the candidates' promises. They see ads that draw attention to the candidates' strengths and weaknesses. Armed with this knowledge and their own beliefs, citizens choose the candidate whom they believe will lead our country in the right direction. Or do they?2In the United States, the people do not directly pick the president. Rather, our country gives this important power to the Electoral College. The Electoral College is a body of electors selected by the people in each state to officially choose the next president. How does the Electoral College work? On Election Day, voters take part in the popular vote. They press a button or pull a lever to vote for a presidential candidate. What they actually do, however, is pick the electors who will become members of the Electoral College. These electors pledge to vote for the chosen candidate in another election held in mid-December. 3The number of members each state has in the Electoral College depends on its population. A state with a large population has more votes than a state with a small population. For example, California has 55 votes while Alaska has 3. In most states, the candidate who wins the popular vote wins all of that states electoral votes. A candidate must receive a majority of the electoral votes to become the next president. How many electoral votes is enough to win? In recent elections, candidates have had to earn at least 270 of the 538 electoral votes to win.4In theory, this system should work, and it has workedmost of the time. A few times, however, the system has failed. In these cases, the candidate with fewer popular votes gained enough electoral votes to win the election. This occurred during the 2000 presidential election when more people voted for Al Gore, but George W. Bush earned more electoral votes and became the president. What causes such a breakdown in the system to happen? Let's return to the example of California and Alaska. A single vote in California has the power to override thousands of votes in other states. Imagine that only one person in California casts a vote for Candidate A. That candidate wins the popular vote in California 10. He or she gets all of California's 55 electoral votes. Across the country, thousands of voters in Maine, New Hampshire, Vermont, Massachusetts, Connecticut, Rhode Island, New Jersey, and Delaware cast their votes for Candidate B. Not one voter casts a vote for Candidate A. These states have a combined 52 electoral votes, which is not enough to beat California's 55. How can the leaders of our country believe that this system is fair?5A long time ago, Americans were scattered far and wide about the country. It made sense to have representatives who voted for them. In this day and age, however, polling places are practically in the next room for most people. With the use of computers, it is possible to tally votes quickly and accurately. The need for the "middle man" is gone. U.S. citizens are perfectly capable of choosing the person they want for president without interference. It is time to graduate from the Electoral College and let the people decide. You want your vote to matter, don't you? pls help me peeps. Which pair of statements best explains an environmental stimulus and a bears response to survive winter?Question 3 options:Environmental stimulus: The bear senses that food is becoming scarce. Response: The bear consumes less food, and its heart rate increases.Environmental stimulus: The days are becoming shorter. Response: The bear consumes more food, and its heart rate decreases.Environmental stimulus: The bear is hungry. Response: The bear consumes more food, and its heart rate increases.Environmental stimulus: The days are becoming longer. Response: The bear consumes less food, and its heart rate decreases. what did theCherokees face on the Trail of Tears? Check allthat applywild animal attacksblazing hot temperaturesstorms of snow and sleetfreezing temperaturesa lack of clothing and shoesthe deaths of friends and family How long do geoscience processes take to occur? plz help will give brainliest A narrative by someone who survived the holocaust that tells the story of the authors survival is what kind of story?biography autobiographyessaymemoirplz hurry need fast if the perimeter of a square is 236 inches, how long is each side? Is x greater than,less than,or equal to 37 The graph below show Laylas Pay as a hairdresser. How much does Layla charge per haircut?A. $5B. $20C. $1D. $10 The government regulates monopolies because A. monopolies generate inefficiency by creating a misallocation of resources. B. monopolies price their output above the marginal cost of production. C. monopolies produce less than the socially desirable level of output. D. All of the above. Mr. Smith has a honeybee colony on his farm. On average, 1,000 bees can gather enough nectar for 1 ounce of honey each day. If Mr. Smith wants his bees to produce 3.5 pounds of honey each week, how many bees will he need in his bee colony? What was the first capital of the United States? Camels are called "Ships of the Desert and Atta Allah" (Gift of God). Why? The qualities and characteristics that shape a person's unique character and identity refer toA. perspectiveB. classificationC. assessmentD. personality