When the pressure that a gas exerts on a sealed container changes from 22.5 psi to psi the temperature changes from 110 c to 65.0 c

Final answer:

The volume at STP that 50.2 grams of CO2 will occupy is found by converting the mass to moles and then multiplying by the molar volume of a gas at STP, which is 22.4 liters per mole.

Explanation:

To find the volume at STP that 50.2 grams of CO2 (g) will occupy, we first need to convert the mass of CO2 to moles using the molar mass of CO2, which is approximately 44.01 g/mol. Next, we apply the concept that one mole of any gas at STP will occupy 22.4 liters. The calculation involves dividing the mass of CO2 by its molar mass to get the moles, and then multiplying the number of moles by 22.4 L/mol to find the volume.The steps are as follows:Calculate the number of moles: number of moles = mass (g) / molar mass (g/mol)

Calculate the volume at STP: volume (L) = number of moles x 22.4 L/mol

By following these steps, we can determine the volume of CO2 gas at STP conditions.

The ideal equation relates the temperature with the pressure and the volume of the gas. When the temperature is increased then the volume will be 4 cubic meters.

An ideal gas equation depicts the relation between the temperature to that of the volume and the pressure of the gas.

The formula is given as,

[tex]\rm \dfrac{P_{1}V_{1}}{P_{2}V_{2}} = \rm \dfrac{T_{1}}{T_{2}}[/tex]

Given,

Initial pressure = 100 kPa

Initial volume = 2 cubic meter

Initial temperature = 100 K

Final pressure = 200 kPa

Final volume = ?

Final temperature = 400 K

The final volume is calculated as:

[tex]\begin{aligned} \rm V_{2} &= \rm \dfrac{P_{1}V_{1}T_{2}}{T_{1}}\\\\&= \dfrac{100\times 2 \times 400}{200 \times 100}\\\\&= 4 \;\rm m^{3}\end{aligned}[/tex]

Therefore, 4 cubic meters is the volume of the final gas.

Learn more about ideal gas here:

https://brainly.com/question/15561696

Answer :

The key differences between a liquid and the a gas is,

A liquid has no fixed shape but it has a volume.

A gas has neither a fixed shape nor a volume.

A liquid has more inter-molecular space between the molecules.

A gas has larger inter-molecular space between the molecules as compared to the liquids.

A liquid has some Inter-molecular attraction between the molecules because of the low Inter-molecular spacing between the molecules.

A gas has very low or minimum Inter-molecular attraction between the molecules because of the larger Inter-molecular spacing between the molecules.

A liquid flow from the higher to the lower region but a gas flow in all the direction.

Liquids and gases differ from each other in the following ways:

1. Intermolecular forces

2. Motion of particles

3. Direction of flow

4. Compressibility

Further Explanation:

Matter can mainly exist in three physical states. These are solid, liquid and gas.

Solid

It is that state of matter that has a definite shape and volume. These have a regular arrangement of its constituent particles. These have the strongest intermolecular forces between their constituent particles and therefore the motion of particles in solid is almost negligible. Table salt, wood, and diamond are some examples of solids.

Liquid

The state of matter with a definite volume but no particular shape is called liquid. The intermolecular forces in the liquids are weaker than that in solids and therefore the motion of particles in liquids is more as compared to that in solids. Milk, water, and bromine are some examples of liquids.

Gas

This state of matter has neither a definite shape nor a definite volume. These have a disordered arrangement of its constituent particles. These have the weakest intermolecular forces between their constituent particles and therefore the motion of particles in a gas is the highest among all states of matter. Nitrogen, hydrogen and carbon dioxide are some examples of gases.

Liquids have a definite volume but gases occupy the volume of the container in which these are kept.

Liquids have stronger intermolecular forces as compared to that of gases so the motion of gas particles is more than that of liquid particles.

Liquids are incompressible whereas gases are highly compressible in nature.

The flow of liquid takes place from higher to lower level while gases can move randomly in all directions.

Learn more:

1. Which sample is a pure substance? https://brainly.com/question/2227438

2. Which is a characteristic of a  mixture? https://brainly.com/question/1917079

Answer details:

Grade: High School

Subject: Chemistry

Chapter: Matter in our surroundings

Keywords: liquid, gas, solid, states of matter, intermolecular forces, shape, volume, matter, strong, weakest, motion of particles.

Answer:

0.015 for APEX

Explanation:

The 3.0% (v/v) label indicates that for every 100 mL of solution, there are 3.0 mL of hydrogen peroxide. Thus, in a 400 mL bottle, there would be 12 mL of hydrogen peroxide.

The percentage given here is a volume/volume percentage, meaning that for every 100 mL of solution, there are 3.0 mL of hydrogen peroxide. To find out how much hydrogen peroxide is in a 400 mL bottle, you just need to scale this proportion up.

Set up an equation like this:

3.0 mL H₂O₂ / 100 mL solution = x mL H₂O₂ / 400 mL solution. Solving for x gives you:
x = (3.0 mL H₂O₂ / 100 mL solution) * 400 mL solution

So, there are 12 mL of hydrogen peroxide in the 400 mL bottle of solution.

https://brainly.com/question/25566753

#SPJ3

The formation of ionic compounds is favored when a metal, which loses electrons, combines with a nonmetal, which gains electrons. This process results in an ionic compound stabilized by ionic bonds between ions of opposite charges, a well-known example being sodium chloride (NaCl). It's also possible for an ionic compound to form between a metal atom and a halogen.

The conditions favoring the formation of ionic compounds typically involve a metal and a nonmetal. This is because metals, which have low ionization potential, tend to readily lose electrons and nonmetals, with high electron affinities, tend to gain electrons. In this process, such as the formation of sodium chloride (NaCl), the metal (sodium) loses an electron to form a cation (Na+), and the nonmetal (chlorine) gains an electron to form an anion (Cl-), resulting in an ionic compound. The compound is stabilized by ionic bonds, which are electrostatic attractions between ions of opposite charges.

The formation of ionic compounds ensures that both the metal and nonmetal achieve a stable electron configuration, often referred to as an octet. Additionally, ionic compounds can also form between a metal atom and a halogen as halogens are a group of nonmetals that are extremely electron-affinitive.

Lastly, it's important to note that not all combinations of metals and nonmetals produce ionic compounds. For instance, compounds that do not contain ions but consist of atoms bonded tightly together in molecules, usually form from two nonmetals and are called covalent compounds.

https://brainly.com/question/3222171

#SPJ3

The answer would be 2.5ML

An organic compound which contains only carbon and hydrogen atoms is called the hydrocarbon. The expanded structural formula for an alkane with three carbon atoms (Propane) is CH₃–CH₂–CH₃. The correct option is B.

The saturated hydrocarbons which consists of only single bonded carbon and hydrogen atoms without any other functional groups are known as alkanes. Their general formula is CₙH₂ₙ ₊ ₂ where 'n' represents the number of carbon atoms.

A formula which denotes all the atoms and bonds present in a compound is defined as the expanded structural formula. But a condensed structural formula omits most of the bonds.

The formula of propane is C₃H₈ and it is a colourless gas.  Its expanded structural formula is CH₃–CH₂–CH₃ which contains three single bonds, 8 'H' atoms and 3 'C' atoms.

Thus the correct option is B.

To know more about hydrocarbons, visit;

https://brainly.com/question/29120960

#SPJ6      

The expanded structural formula for an alkane with three carbon atoms is CH₃-CH₂-CH₃, which represents propane with the molecular formula C₃H₈.

The expanded structural formula for an alkane with three carbon atoms is CH₃-CH₂-CH₃. This compound is known as propane, which follows the general alkane formula CₙH₂ₙ+2. In this case, with three carbon atoms (n=3), the molecular formula becomes C₃H(₂x₃)₊₂, which simplifies to C₃H₈. Therefore, C₃H₈ is the correct molecular formula for propane, whereas C₃H₆ would be an alkene with a double bond between carbon atoms, not an alkane.

In the titration of a weak acid with a strong base, the pH after adding 20.00 mL of base can be determined by considering the concentration of the weak acid and the remaining base after the reaction.

To determine the pH after adding 20.00 mL of a 0.10 M strong base to a 40.00 mL sample of a 0.10 M weak acid with a Ka value of 1.8×10−5, we need to consider the reaction between the acid and the base.

Since the acid is weak, it does not dissociate completely. As a result, the pH can be calculated by considering the concentration of the weak acid and the remaining base after the reaction.

Using the titration curve as a reference, you can find the pH value corresponding to 20.00 mL of added base.

https://brainly.com/question/2728613

#SPJ3

Answer:

The electron configuration of a chlorine ion in a compound of BeCl2 is

1s²2s²2p⁶3s²3p⁶

Explanation:

Beryllium chloride (BeCl2) is an ionic compound where Be is an alkaline earth metal (group 2) and Cl is a halogen atom (group 17).

Alkaline earth metals have a charge of +2 while halogens exhibit a -1 charge. Hence in BeCl2 each Be atom exists as Be2+ cation and Cl exists as Cl- anion.

The atomic number of Cl = 17. The valence electron configuration for the neutral atom is:

Cl(Z=17) = 1s²2s²2p⁶3s²3p⁵

The chloride ion has an addition electron, therefore

Cl⁻(Z = 17+1 = 18) = 1s²2s²2p⁶3s²3p⁶

Answer:  an aqueous potassium hydroxide solution

An alkaline fuel cell is a zero-emission device whose one major component is the electrolyte. An electrolyte, on the other hand,  is a solution that is able to conduct electricity. In an alkaline fuel cell. The electrolyte is an alkaline liquid, and potassium hydroxide also known as KOH is the only alkaline liquid among the choices. 

Option d: N and P

In a periodic table, elements within the same group have similar properties.

(a) K and He: Here, K (potassium) belongs to group 1 , alkali metals and He belongs to group 18, noble gas thus, they cannot have similar properties.

(b) Li and B: Here, Li (lithium) belongs to group 1, alkali metals and B (boron) belongs to group 13, it is the only non-metal in group 13. Thus, they cannot have similar properties.

(c) I and Ca: Here, I (iodine) belongs to group 17, halogen, they electronegative in nature and Ca (calcium) belongs to group 2, alkaline earth metal, they are electropositive in nature. Thus, they cannot have similar properties.

(d) N and P: Here, both N (nitrogen) and P (phosphorus) belongs to group 15, they both are non metals and have 5 electrons in their outermost shell thus, they both have similar properties.

Therefore, option (d) is correct.

The thermochemical equation for the combustion reaction of magnesium with oxygen is:

[tex]\[ 2 \text{Mg}(s) + \text{O}_2(g) \rightarrow 2 \text{MgO}(s) \quad \Delta H = -1204 \text{ kJ} \][/tex]

The given reaction is the combustion of magnesium (Mg) with oxygen (O2) to form magnesium oxide (MgO). According to the stoichiometry provided in the question, 2 moles of solid magnesium react with 1 mole of oxygen gas to produce 2 moles of solid magnesium oxide. Along with the formation of products, 1204 kJ of heat is released, indicating that the reaction is exothermic.

In a thermochemical equation, the reactants are written on the left side, and the products are written on the right side, separated by an arrow that points towards the products. The coefficients in the equation (the numbers in front of the chemical formulas) represent the moles of each substance involved in the reaction. In this case, the coefficients are 2 for magnesium, 1 for oxygen, and 2 for magnesium oxide, as given in the question.

The enthalpy change [tex](\(\Delta H\))[/tex] for the reaction is included at the end of the equation to indicate the amount of heat absorbed or released during the reaction. Since the reaction releases heat, the enthalpy change is negative, and it is equal to -1204 kJ for the given reaction. This negative sign indicates that the system releases energy to the surroundings.

Therefore, the complete thermochemical equation, which includes the stoichiometric coefficients and the enthalpy change, is written as:

[tex]\[ 2 \text{Mg}(s) + \text{O}_2(g) \rightarrow 2 \text{MgO}(s) \quad \Delta H = -1204 \text{ kJ} \][/tex]

This equation accurately represents the combustion reaction of magnesium with oxygen, both stoichiometrically and thermochemically.

Answer: Esters for Plato

Explanation:

The empirical formula should be [tex]C_3H_7[/tex]

C: 83.7% = 83,7 g

H: 16.3% = 16.3 g

Now

[tex]C = 83.7 \div 12 = 6.975 mol\\\\H = 16.3 \div 1 = 16.3 mol[/tex]

The above does not represent the integers

So,

[tex]C = 6.975 \div 6.975 = 1\\\\H = 16.3 \div 6.975 = 2.3[/tex]

Therefore the above empirical formula should be used.

Learn more: https://brainly.com/question/1979431?referrer=searchResults

Final answer:

The molality of the solution is calculated by dividing the number of moles of glucose by the mass of water in kilograms, resulting in a solution with a molality of 0.544 m.

Explanation:

The question is asking to calculate the molality of a glucose solution. To find the molality, we need to know the mass of the solute (glucose) and the mass of the solvent (water) in kilograms.

Steps to Calculate Molality

First, calculate the number of moles of glucose (C6H12O6). Its molar mass is 180.16 g/mol.

Next, convert the mass of water from milliliters to kilograms. Since the density of water is 1.00 g/mL, we simply convert 150.0 mL to grams and then to kilograms.

Finally, use the equation for molality: molality (m) = moles of solute (mol) / mass of solvent (kg).

Let's perform the calculations:

Moles of glucose = 14.7 g / 180.16 g/mol = 0.0816 mol

Mass of water = 150.0 mL * 1.00 g/mL = 150.0 g = 0.150 kg

Molality of the solution = 0.0816 mol / 0.150 kg = 0.544 m

Answer:

0.668 g of barium sulfate

Explanation:

Given,

Balanced chemical equation: BaCl₂ + Na₂SO₄ → BaSO₄ + 2NaCl.

Volume of BaCl₂ = 25.34 mL x [tex]\frac{1L}{1000 ml }[/tex]= 0.02534 L.

Molarity of BaCl₂ = 0.113 M

Molarilty = [tex]\frac{moles of solute}{L of the solution }[/tex]

Moles of solute = Molarilty x L of the solution

Moles of BaCl₂ = 0.113 M x 0.02534 L = 0.00286 mol.

From the balanced chemical equation there is a 1:1 molar ratio between BaCl₂ and BaSO₄

Therefore, moles of BaCl₂ = moles of BaSO₄

Moles of BaSO₄ = 0.00286 mol.

Mass of BaSO₄ = moles of BaSO₄ x Molar mass of BaSO₄

Mass of BaSO₄ = 0.00286 mol x 233.4 g/mol.

Mass of BaSO₄ = 0.668 g.

Answer:1,2,3-trichloropropane

Explanation: