Which body part would most likely be affected by the improper application of a compression wrap?

Answers

Answer 1
It could be your arms or legs

Answer 2

Answer:

Tendons

Explanation:  A compression wrap is a strip of cloth that one can wrap around  a strain or sprain. Its pressure helps in reducing swelling and the injury starts to heal itself.

A tendon connects muscle to bone for the proper functioning of the body. It is basically a band of fibrous connective tissue capable of withstanding tension.


Related Questions

This movement of warmer and cooler mantle rocks creates pockets of circulation within the mantle called _________,

Answers

The answer is convection cells. Hope this helps ;). 

Assume the light waves start out as unpolarized white light. How do light waves incident on the Polarizer and Analyzer behave at their respective angles?

Answers

because when it gets colder out the sun and or the moon will change colors and when it gets hot out the sun and the moon go back to their original colors 

A ski lift is used to transport people from the base of a hill to the top. If the lift leaves the

base at a velocity of 15.5 m/s and arrives at the top with a final velocity of 0 m/s, what is the height of the hill? Round the answer to the nearest tenth.

 

Answers

The energy of the ski lift at the base is kinetic energy:
[tex]K= \frac{1}{2}mv^2 [/tex]
where m is the mass of the ski lift+the people carried, and [tex]v=15.5 m/s[/tex] is velocity at the base.
As long as the ski lift goes upward, its velocity decreases and its kinetic energy converts into potential energy. Eventually, when it reaches the top, its final velocity is v=0, so no kinetic energy is left and it has all converted into gravitational potential energy, which is 
[tex]U=mgh[/tex]
where [tex]g=9.81 m/s^2[/tex] and h is the height at the top of the hill.

So, since the total energy must conserve, we have
[tex]U=K[/tex]
and so
[tex]mgh = \frac{1}{2}mv^2 [/tex]
from which we find the height:
[tex]h= \frac{v^2}{2g}= \frac{(15.5m/s)^2}{2\cdot 9.81 m/s^2}=12 m [/tex]

Answer:

it's actually 12.3 on Edge!

Explanation:

The lowest note on the piano has the longest string to vibrate. How does the lowest note compare if you consider the column of air that is vibrating in test tubes or bottles?

Answers

The piano strings for low notes are heavier, have more inertia, and vibrate at a lower frequency a lower pitch than lighter strings of the same string tension. Loudness involves how hard the keys are struck, which affects the amplitudes of the vibrating strings. the touch sensitivity of the piano distinguishes it from earlier.



Do you undertand?????

Final answer:

Longer piano strings and longer air columns in musical instruments both produce lower notes due to lower frequencies of vibration. The lowest note on a piano correlates with the longest string, similar to how the longest air column in a wind instrument produces the lowest note. For a clarinet, the third harmonic frequency would be three times the fundamental frequency (e.g., 3 × 147 Hz = 441 Hz).

Explanation:

The student's question relates to how vibrations in piano strings and air columns generate sound. For a piano, the pitch of a note is determined by the frequency of the vibrating string, with longer strings producing lower notes. The sound production principles in both cases rely on the physical properties of the system - in the piano, the length, tension, and mass of the string, and in air columns, the length and shape of the column. When comparing to an air column in a test tube or bottle, the longest string on the piano corresponds to the longest air column, which also produces the lowest note. Consequently, the lowest note on the clarinet is produced when all the tone holes are closed, yielding the longest effective length of the air column and hence the longest wavelength and lowest frequency.

In relation to air columns, the frequency of the third harmonic in a clarinet can be predicted based on the fundamental frequency. If the fundamental frequency is 147 Hz, the third harmonic, being three times the fundamental frequency, would be 3 × 147 Hz = 441 Hz.

The specific heat of iron is 0.11 cal/goC. A cafeteria fork made of iron has a mass of 20 grams. How much heat energy is needed to raise the temperature of this form from 25oC to 75oC?
0.044 calories
0.275 calories
110 calories
9090.9 calories

Answers

Answer: 110 cal

It is given that he specific heat of Iron is [tex] 0.11 cal/g^o C[/tex].

Mass of iron fork 20 g

Heat energy is needed to raise the temperature of this from [tex] 25^o C to 75^o C [/tex]

we can use the following formula to calculate heat energy:

[tex] Q=mC \Delta T [/tex]

where Q is the heat required to raise the temperature by [tex]\Delta T[/tex] of a mass m having specific heat C.

Insert the values:

[tex] Q=20 g \times 0.11 cal/g^oC (75^o C -25^o C)\\\Rightarrow Q=(2.2\times50)cal=110 cal[/tex]

Thus, heat required to raise the temperature of iron fork is 110 cal.

What keeps the balanced rock balanced

Answers

Hello,

Here is your answer: 

The proper answer to this question is "because of there substantial size the rock rests on another rock which keeps it balanced".

If you need anymore help feel free to ask me!

Hope this helps!

5 A \machine produces compression waves in a spring that is 120 cm long by pulsing twice every second. The back and forth movement of the pulse creates compressed sections of the spring that are 30 cm apart and travel toward the other end of the spring. Which property of the wave does the value of two per second describe? A. wavelength B. intensity C. frequency D. amplitude

Answers

The correct answer is C) frequency.
In fact, the frequency is the number of wave crests (or pulses) per seconds. In our problem, the machine that produces the wave pulses two times per second, so this is exactly the frequency of the compression wave.

Answer:

D. Frequency

Explanation:

The machine produces compression waves in a spring that is 120cm long and it pulse twice every seconds. The property the wave exhibits by exhibiting the value of two per second is the Frequency.

Amplitude of a a wave is the maximum displacement from the equilibrium position. The amplitude of an object is equal to one half the path of the vibration path. The amplitude of a wave is proportional to the amplitude of the source. Amplitude measures how big a wave is . Amplitude of a wave usually look at the energy of a wave so it is not the amplitude .

The frequency of a wave gives the number of  wave that passed fixed point at a given time.

how to calculate the total current of a circuit which has both parallel and series connection

Answers



1) using kirchhoff voltage and current law.
2) voltage and current divider rule
3) ohm's law

A study published in Science notes that water flowing from the Atlantic Ocean into the Arctic is warmer than it's been in 2,000 years. Scientists believe that this increased heat input has far-reaching consequences to life on Earth. U.S. and European scientists studied the Fram Strait branch of the North Atlantic Current, the ocean current that carries heat north from the tropics. By studying tiny-shelled organisms called foraminifera found deep in the ocean floor, they could chart temperatures going back 2,000 years. From their findings, scientists reported that the water has warmed about 2o C since the late 1800's. We would expect warmer Northern Atlantic currents to have all BUT ONE of these consequences on Earth.

Answers

Warmer Northern Atlantic currents would have no effect on the Earth's mass or shape.

Answer:

C

Explanation:

decreased precipitation

Metamorphic rocks are made from

I .sedimentary rocks
II.igneous rocks
III.other metamorphic rocks

A. I and III only
B. III only
C. I and II only
D. I, II, and III

Answers

D! It can be made from all.
The answer is D) They can be made from any rock. Metamorphic rocks can be formed from any other type of rock - sedimentary or igneous. Remember these two examples of common metamorhpic rocks and where they come from: slate is formed from shale. marble is formed from limestone.
~Deceptiøn

Which is an example of the force of attraction between two objects that have mass?

A:Gravity
B:Solar energy
D:Electricity

Answers

they deleted my answer. again the answer is gravity

What primarily makes up Saturns rings?

A. Large rocks
B. Small icy bodies
C. Medium sized moons
D. Fine dust

Answers

Saturn's rings are made out of B. Small icy bodies

Hope this helped ;)

Answer is (B).....sure

What is the potential energy of a 150 kg diver standing on a diving board that is 10 m high?

The potential energy is
J.

Answers

W= F x dPower (formula)P= W/tForce (formula)F= m x anewton (N)the SI unit for force , equal to 1 kg*m/s2joule (J)the SI unit of work, equal to 1 newton-meter

Answer:

The potential energy is  14700J.

Explanation:

Definition of potential energy:

Potential energy is the energy that measures the ability of a object  to perform a job based solely on its position (height at which the object is from the ground), and it is calculated with the following formula:

Ep= m*g*h Formula (1)

Ep: Potential energy in Joules (J)

m : mass (kg)

g: acceleration due to gravity (m/s²)

h: height (m)

Data

m= 150 kg

g = 9.8 m/s²

h=  10 m

Problem development

We replace data in formula (1)

Ep=  150 kg*9.8 m/s²*10 m = 14700 N*m =  14700J

Ep=  14700J

What is the energy of a photon with a frequency of 2.2 × 1016 Hz? Planck’s constant is 6.63 × 10–34 J•s.
1.5 × 10–17 J
8.8 × 10–17 J
1.5 × 10–16 J
8.8 × 10–16 J

Answers

Energy = frequency (v) * Planck's constant (h)
E =hv
E= 6.62*10^-34 * 2.2*10^16 = 1.45*10^-17
Approximately ~ 1.5*10^-17J

Taking into account the definition of photon and energy of a photon, the correct answer is the first option: The energy of a photon with a frequency of 2.2×10¹⁶ Hz is 1.5×10⁻¹⁷ J.

You have to know that electromagnetic radiation carries energy, which can be absorbed or emitted. To explain the processes of emission and absorption, Plank and Einstein proposed that the energy of radiation is composed of indivisible units (quanta). In each elemental process only a quantum of light can be emitted or absorbed. Each of these quanta was called a "photon".

The exchanges of energy between matter and radiation take place not continuously, but by discrete and indivisible quantities or quanta of energy. The quantum of energy is proportional to the frequency of radiation.

The relationship between the amount of energy (E) transported by the photon and its frequency (f) is determined by the following expression, where the energy of a photon is obtained by multiplying Planck's constant h by the frequency f of electromagnetic radiation:

E=h×f

In this case, you know:

h=  6.63*10⁻³⁴ Jsf= 2.2×10¹⁶ Hz

Replacing:

E= 2.2×10¹⁶ Hz× 6.63×10⁻³⁴ Js

E= 1.4586×10⁻¹⁷ J≅ 1.5×10⁻¹⁷ J

The correct answer is the first option: The energy of a photon with a frequency of 2.2×10¹⁶ Hz is 1.5×10⁻¹⁷ J.

Learn more:

https://brainly.com/question/8924116?referrer=searchResultshttps://brainly.com/question/6945706?referrer=searchResultshttps://brainly.com/question/8000078?referrer=searchResults

The Earth's surface is divided up into several large, movable tectonic plates. Which of the following is true about these plates? A. The Earth has both continental and oceanic tectonic plates. B. The Earth has only oceanic tectonic plates. C. The Earth has neither continental nor oceanic tectonic plates. D. The Earth has only continental tectonic plates.

Answers

Answer:

the answer is A, the earth has both continental and oceanic tectonic plates.

Explanation:

hope this helped:)

The Earth's surface is divided up into several large, movable tectonic plates, that can be the Earth has both continental and oceanic tectonic plates.

What is tectonic plates?

The Earth's permeable outside husk can be separated or splits in to large parts is called tectonic plates. They are thick layer of warm fluid-rock which are gliding on the Earth's mantle. Plate tectonics forms the oceans, continents, and mountains. Most plates are composed of both continental and oceanic crust.

The lithosphere used to split up into  the following parts,

seven very large continental- and ocean-sized plates,six or seven medium-sized regional plates, several small ones.

The method of plate tectonics may be inspired by convection in Earth’s mantle, the extraction of heavy old pieces of crust into the mantle, or some combination of both.

Hence, Option A is the correct answer.

Learn more about tectonic plates,

https://brainly.com/question/16944828

#SPJ2

What is the speed of a wave if the wavelength is 100 m and the period is 20 s? 2,000 m/s 120 m/s 80 m/s 5 m/s

Answers

the formula for speed is distance divided by time. if you plug in the numbers, you get 100 divided by 20. the answer is 5m/s

The speed of the wave is 5 m/s.

What is wave speed?

Wavelength and time period both influence wave speed. The distance between two similar spots on adjacent waves is known as the wavelength. Time period is the amount of time needed for a wave to pass a fixed location.

This equation demonstrates how the three variables are connected:

Speed of wave = Wavelength ÷ Time period.

Given parameters:

The wavelength of the wave; λ = 100 m.

Time period of the wave; T = 20 s.

Then, speed of the wave; v = ?

We know that,

The speed of the wave; v = λ/T = (100m/20s) = 5 m/s.

Hence, the speed of the wave is 5 m/s.

Learn more about speed here:

https://brainly.com/question/10715783

#SPJ2

If we mechanically squeeze a gas into a smaller volume, what happens to the pressure and temperature?

A. The pressure and temperature both increase, but we can't predict how much each one will change.
B. The pressure increases and the temperature decreases.
C. Only the pressure increases.

Answers

Its A- the pressure and tempt both increase...

If we mechanically squeeze a gas into a smaller volume the pressure and temperature will increase but we can't predict how much each one will change.

Answer: Option A

Explanation:

When we squeeze a gas or a material, a force acts upon it making it to compress which increases the pressure subsequently as tension and compression is always accompanied by pressure.

The temperature of gas also increases as work is done due to transfer of energy which alters the existing temperature.

These are nontoxic, nonflammable chemicals containing atoms of carbon, chlorine, and fluorine that have created a hole in the ozone

Question 1 options:

smog


acid rain


chlorofluorocarbons (CFCs)


EPA

Answers

The correct answer is: Chlorofluorocarbons (CFCs)

Explanation:
In simple words, CFCs are the chemical compounds made up of the following three elements:
1. Carbon
2. Chlorine
3. Fluorine

When CFCs compounds reach the upper atmosphere, the ultraviolet rays coming from the Sun break those compounds into individual elements, which then react with one of the oxygen atom of the ozone (O3) to form new compounds like chlorine monoxides. That way the ozone molecules get destroyed, resulting into the ozone depletion. Hence, the correct answer is Chlorofluorocarbons (CFCs).

Answer:

The correct answer is option C,  

chlorofluorocarbons (CFCs

Explanation:

The chlorofluorocarbons (CFCs) were being used in air conditioners, aerosol spray cans, and industrial cleaning products since 1960s. These CFCs are inflammable, but once they are into atmosphere they move to the upper stratosphere and there they enter into a never ending chain reaction thereby releasing chlorine . The free chlorine react with ozone and destroy its molecule.

Balanced rock has a mass of about 36,000 kg. If the acceleration due to gravity is 9.8m/s^2, what is the force that the rock is exerting in its pedestal

Answers

Newton's second law! Use force = mass (x) acceleration

The answer should be 352,800 N onto the pedestal

Answer:

Force, F = 352,800 N

Explanation:

Given that,

Mass of the rock, m = 36000 kg

Acceleration due to gravity, [tex]a=9.8\ m/s^2[/tex]

We need to find the force that the rock is exerting in its pedestal. It can be calculated using Newton’s second law of motion as :

F = m × a

[tex]F=36000\times 9.8[/tex]

F = 352,800 Newton

So, the force acting on the rock is 352,800 Newton. Hence, this is the required solution.

which of these would be best explained by the Doppler effect? A) the change in frequency as you shorten a guitar string. B) the change in pitch heard as an ambulance approaches you. C) the change in volume as a train pulls away from the station. D) the change in seed of a sound wave as it travels from air into water.

Answers

The  correct answer is B) the change in pitch heard as the ambulance approaches. 
In fact, doppler effect occurs when the source of a wave is moving with respect to the observer. In this case, the source is the ambulance and the wave is a sound wave. The result is that there is a shift of the frequency (and therefore of the pitch) as seen by the observer, with respect to the original frequency of the source.

Please select the word from the list that best fits the definition the name for continents in one landmass surrounded by gigantic ocean

Answers

Hello!

The name for continents in one landmass surrounded by gigantic ocean is Pangaea.

This name is originated from the Greek words Pan ("all") and Gaia ("Earth"). It describes the supercontinent that would have existed in the Cenozoic and Mesozoic periods by the joining of all continents that we know them today.

The gigantic ocean that surrounded it is called Panthalassa, from Greek Pan ("all") and thálassa ("sea"). 

Have a nice day!

Answer:

subcontinent

Explanation:

a subcontinent is a large landmass, smaller than a continent

The unit for measuring the rate at which light energy is radiated from a source is the

A. candela.
B. lumen.
C. lux.
D. Angstrom.

Please explain

Answers

The unit for measuring the rate at which light is radiated from a source is B, Lumen. Lumenous flux is the time rate of the flow of light, or the visible energy produced from a certain light source.  It is the quantitative measure of brilliance of a light source. The unit we use for this is lumen. 

What conclusion can you draw based on the data in the scatterplot?

Answers

The scatter plot diagram shows us the relation of icecreams with that of consumption

As per the scatter, plot graph shows the increase in the amounts of temperature up to 80° F leads to intake of more ice creams and cones per person going up to 0.56. Hence the increase in temperature lead to changes in buying behavior. More is the temperature more is consumption.

Learn more about the conclusion can you draw based on the data in the scatterplot.

brainly.com/question/15867278.

Final answer:

The scatter plot shows a linear pattern, indicating a significant linear relationship between the X and Y variables.

Explanation:

The scatter plot shows a linear pattern in the data, where the points roughly form a straight line. This indicates a linear relationship between the X and Y variables. However, it is important to consider the correlation coefficient as well.

If the correlation coefficient is significantly different from zero, it suggests a strong linear relationship. In this case, there is sufficient evidence to conclude that there is a significant linear relationship between the X and Y variables.

Therefore, the X and Y variables would be good candidates for linear regression to predict outcomes.

Which is a unit rate

A)47c for 2 pens

B)20 gallons or 2 hours

C)15 hours for 3 months

D)18 miles driven in a week

Answers

d. 18 miles driven in a week

Answer: D) 18 miles driven in a week

Explanation:

A unit rate describes how many units of the first type of quantity corresponds to one unit of the second type of quantity.

a. 47 c for 2 pens

thus the price is for 2 pens and not 1.

b. 20 gallons or 2 hours

Thus the amount of gasoline used is for 2 hours and not 1.

c. 15 hours for 3 months

Thus the time given is for 3 months.

d. 18 miles driven in a week

The distance given is for 1 week and thus is the unit rate.

Thus unit rate is 18 miles driven in a week.

i'll make u the brainlyist


Which three forms of light are invisible light?

A.blue light

B.infrared rays

C.radio waves

D.red light

E.x-rays

Answers

Three forms of light that are invisible light are : radio waves, infrared rays, and x-rays. Red light and blue light are color spectrums called visible light not invisible light.

Your answer is: B) Infrared rays, C) radio waves, E) x-rays 

Have an amazing day mate!

A _____________________ _______________________, current moves through multiple
paths at once. If one part fails, the other parts can still work.

Answers

Answer: Parallel Circuit

 A parallel circuit has current that is involve in two or more paths for the electricity to flow and the loads are parallel to each other. If the loads in this circuit were light bulbs and one part fails, the other parts can still work because there is still current flowing to the others for they are still in a direct path from the negative to positive terminals of the electric source or battery.


Your brother is insisting that you'll never hear a sound produced behind a barrier wall at the end of your yard. You notice that the door within the wall is open and quickly explain to him that the sound will be able to reach you due to



Answers

Final answer:

Sound waves can reach you behind a barrier wall due to the phenomenon of diffraction, which allows them to bend around obstacles and spread into open areas. This is why sounds, unlike light, are still heard through an open door despite a barrier wall obstructing the direct path.

Explanation:

The sound will be able to reach you even if it is produced behind a barrier wall as a result of diffraction. This is a wave phenomenon where sound waves bend around obstacles and spread into the space beyond an opening, such as a doorway. Diffraction occurs with waves of all kinds when their wavelengths are comparable to the size of the obstacle or opening they are encountering. Since sound waves have wavelengths that are similar to the size of everyday objects, like doors, they exhibit notable diffraction effects compared to light which has much smaller wavelengths and thus diffracts less.

For example, when someone is playing music in a room, the sound waves travel around and fill the entire space, even through openings like doorways. This can lead to varying sound effects within the room, such as the sound appearing dull in some corners due to destructive interference or standing waves and excessively loud in other areas due to constructive interference. It is the bending or diffraction of sound waves that enables these different acoustic experiences within the room.

Final answer:

Sound waves can diffract around obstacles and reach areas that are not directly in their line of sight. This allows you to hear sound produced behind a barrier wall when the doorway is open.

Explanation:

Sound waves have the ability to bend around obstacles, which allows them to reach areas that are not directly in their line of sight. This phenomenon is known as diffraction.

In the scenario you described, the sound waves produced behind the barrier wall will be able to reach you because they can diffract through the open doorway. The wavelength of sound waves is large enough that it allows them to bend around the edge of the doorway and spread out into the yard.

As a result, you will be able to hear the sound produced behind the barrier wall, even though it is not directly in your line of sight.

Please help me on 3,4 and 6.
Thanks

Answers

3. The second piston will experience the same force as compared with the first. This is because since the pressure is the same everywhere inside the fluid system, the force is proportional to the surface area. We are told that both the first and the second piston have the same surface area, therefore, they will both experience the same force/pressure.


4. The situation is much the same as number 3 above, with the exception that the second piston is twenty times larger than the first. Again, since the pressure is the same everywhere inside the fluid system, the force is proportional to the surface area. We are told that the second piston is 20 times larger than the first, therefore, the larger piston will experience 20 times larger the force of the small one.


6. The answer is TRUE. The hydraulic braking system of most cars makes use of a vacuum servo (or booster), which is located between the brake pedal and the master cylinder piston. This vacuum servo amplifies the force applied from the brake pedal.

Which of the following situations would cause the greatest increase in the motion of molecules in a system?   A. The system absorbs 75 J of heat, and its volume is halved.   B. The system releases 75 J of heat, and its volume doubles.   C. The system absorbs 75 J of heat, and its volume doubles.   D. The system releases 75 J of heat, and its volume is halved.

Answers

The answer is B. When the system absorbs energy, the molecules gain more kinetic energy and hence start to move faster. Doubling the size of the system also gives more room for the molecules to move randomly around the system before colliding with other molecules hence increasing their motion.




Answer:

The correct answer is A. The system absorbs 75 J of heat, and its volume is halved.

Explanation:

For this question, we want the system's molecular motion to experience an INCREASE. So if your question is asking for a DECREASE in molecular motion, this answer does not apply! Instead, it would be "The system releases 75 J of heat, and its volume doubles." Let me explain.

Molecular motion increases with increasing temperature, since collisions increase. For that reason, we want to look for the answer choice that experiences an increase in temperature, with would mean that the system absorbs (NOT RELEASES) 75 J of heat. Additionally, a system's molecular motion increases when its volume decreases. With a smaller volume, molecules are closer together and hit each other more often, increasing molecular motion. And so, for the motion of molecules to INCREASE, the volume would actually have to decrease or be halved! Answer choice A is correct!

If that explanation isn't enough to sway you, know that I took this computer-scored test and received 100%. If you review your study notes from this unit, you'll see that my answer makes sense. I hope that helped! :)

When studying the attraction between objects, which of the following can be concluded?

Answers

The answer is 2,and 4.

Answer:

2 , 4

Explanation:

Other Questions
A cone has a radius of 11 inches and a height of 4.5 inches.What is the volume of the cone?Use 3.14 for pi. Round to the nearest tenth.A. 49.5 inB. 121.4 inC. 569.9 inD. 1024.4 in The framers of the constitution created a system of checks and balances so the branches of government could restrain each other. Explain how each branch of government is restrained and can restrain the other branches. what are the six kingdoms of living organisms solve for kj= k^2/4 Helpppp!!! ASAP!!!!!!!! Why is a dilute solution of oleic acid used instead of pure oleic acid? PLZZ HELP 20 POINTS!!1.The spread of ideas, art, religions, technologies, and languages from one culture to another is known as A) voluntary trade. B) triangular trade. C) cultural diffusion. D) standard of living. 2.An example of cultural diffusion resulting from Spanish colonization in the New World is that the native people were forced toA) work as slaves in the West Indies. B) adopt and practice new religious beliefs. C) wear Western clothing and attend English schools. D) move to reservations west of the Mississippi River. 3.Out of the experience of an extraordinary human disaster [Apartheid] that lasted too long, must be born a society of which all humanity will be proud. The time for the healing of the wounds has come. The moment to bridge the chasms that divide us has come. Never, never and never again shall it be that this beautiful land will again experience the oppression of one by another and suffer... indignity.-Inaugural Address, May 10, 1994The MOST LIKELY location of the Inaugural Address was in what country?A) Ghana B) India C) Rwanda D) South Africa 4.papyrus would have been MOST important in the Egyptians' ability toA) irrigate. B) communicate. C) build pyramids. D) defeat invaders. Which choice BEST describes what might happen to unemployment rates if retirement ages were raised?A)In the short term, unemployment rates would remain stable.B)In the short term, unemployment rates would drop drastically.C)In the short term, unemployment rates would rise drastically.D)In the short term, unemployment rates would depend on other market factors. what is one advantage of sexual reproduction ?A. The offspring are identical to the parents.B. The offspring are resistant to viruses.C. The offspring are born live, rather than from eggs.D. The offspring inherit a wider variety of genetic information. The video mentions how thermos considers "how you see yourself" when segmenting its market. in psychographic terms "how you see yourself" is called ______. Heating and/or agitation of egg whites results in: 16 is what fractional part of 20 a spit is when the land curves and longshore drift keeps going ? True or False An earthquake that occurs within the depth of the earth's crust is called Which model assumes that the system's subcomponents work together harmoniously to achieve that social product we call justice?a. conflict modelb. criminal justice modelc. consensus modeld. crime control model? Which expression gives the distance between the points (4, 6) and (7, -3)? Y varies inversley with x y= 0.5 x= 3 what is the value of k the constant of inverse variations Help please asap, thankscan someone explain how you factor 6x^3 + 8x^2 + 2x WILL MARK AS BRANLIEST IF CORRECT!!Which equation best represents a trend line for the scatter plot? A. y=6/7x+50/7 B. y=7/6x+55/6 C. y=7/6x+41/6 D. y=6/7x+62/7https://static.k12.com/nextgen_media/assets/8124601-NG_IMC_IT_03_NP037_32.png (Copy and paste the URL into search bar to see graph) Learning associations between one's own behavior and resulting events best describes ________ while learning associations between events one does not control best describes ________.