Answer:n=1
Explanation:
Final answer:
The energy level n=1 has the least energy.
Explanation:
The energy levels of electrons in an atom are determined by the principal quantum number, denoted as n. The higher the value of n, the higher the energy level. Therefore, the energy level n=7 has the highest energy. On the other hand, the energy level n=1 has the lowest energy, which makes it the answer to your question.
What is the pH of 9.01 x 10^-4 M Mg(OH)2
What is the pH of 2.33 x 10^-2M of NH4OH
Answer:
A. 11.26
B. 12.37
Explanation:
A. Step 1:
Dissociation of Mg(OH)2. This is illustrated below below:
Mg(OH)2 <==> Mg2+ + 2OH-
A. Step 2:
Determination of the concentration of the OH-
From the above equation,
1 mole of Mg(OH)2 produce 2 moles of OH-
Therefore, 9.01x10^-4 M Mg(OH)2 will produce = 9.01x10^-4 x 2 = 1.802x10^-3 M of OH-
A. Step 3:
Determination of the pOH. This is illustrated below:
pOH = - Log [OH-]
[OH-] = 1.802x10^-3 M
pOH = - Log [OH-]
pOH = - Log 1.802x10^-3
pOH = 2.74
A. Step 4:
Determination of the pH.
pH + pOH = 14
pOH = 2.74
pH + 2.74 = 14
Collect like terms
pH = 14 - 2.74
pH = 11.26
B. Step 1:
Dissociation of NH4OH. This is illustrated below below:
NH4OH <==> NH4+ + OH-
B. Step 2:
Determination of the concentration of the OH-
From the above equation,
1 mole of NH4OH produce 1 moles of OH-
Therefore, 2.33x10^-2M of NH4OH will also produce 2.33x10^-2M of OH-
B. Step 3:
Determination of the pOH. This is illustrated below:
pOH = - Log [OH-]
[OH-] = 2.33x10^-2M
pOH = - Log [OH-]
pOH = - Log 2.33x10^-2M
pOH = 1.63
B. Step 4:
Determination of the pH.
pH + pOH = 14
pOH = 1.63
pH + 1.63 = 14
Collect like terms
pH = 14 - 1.63
pH = 12.37
what is the molarity of a solution made by dissolving 25.0 grams of NaCl in 250.0 mL of solution
Answer:
Molarity= 1.7M
Explanation:
n= m/M = 25/58.5= 0.427mol
Applying
n=CV
0.427= C×0.25
C= 1.7M
Using the Brønsted-Lowry concept of acids and bases, identify the Brønsted-Lowry acid and base in each of the following reactions:
HSO3−(aq)+H2O(l)→H2SO3(aq)+OH−(aq)
(CH3)3N(g)+BCl3(g)→(CH3)3NBCl3(s)
Drag the appropriate items to their respective bins.
Answer:
1. HSO³⁻(aq) + H₂O(l) → H₂SO₃(aq) + OH⁻(aq)
The Brønsted-Lowry acid is H₂O and the Brønsted-Lowry base is HSO³⁻
2. (CH₃)₃N(g) + BCl₃(g) → (CH₃)₃NBCl₃(s)
There are no Brønsted-Lowry acids and bases in this reaction.
Explanation:
According to the Brønsted-Lowry concept, when an acid (HA) and a base (B) undergoes a chemical reaction, the acid (HA) loses a proton and forms its conjugate base (A⁻), whereas the base gains (B) the proton to form its conjugate acid (HB⁺).
The chemical equation for this reaction is:
HA + B ⇌ A⁻ + HB⁺
Given reactions:
1. HSO³⁻(aq) + H₂O(l) → H₂SO₃(aq) + OH⁻(aq)
The Brønsted-Lowry acid is H₂O and the Brønsted-Lowry base is HSO³⁻
Reason: In this reaction, the acid H₂O loses a proton and forms its conjugate base, OH⁻. Whereas, the base HSO³⁻ gains a proton to form its conjugate acid, H₂SO₃.
2. (CH₃)₃N(g) + BCl₃(g) → (CH₃)₃NBCl₃(s)
There are no Brønsted-Lowry acids and bases in this reaction.
Reason: In this reaction, there is no exchange of proton between the acid and the base.
A proposed mechanism is: Step 1: H2(g) + ICl(g) → HI(g) + HCl(g) (slow) Step 2: HI(g) + ICl(g) → I2(g) + HCl(g) (fast) Which of the following species is a catalyst? ICl HCl This mechanism has no catalyst. HI H2
Answer: This mechanism has no catalyst
Explanation:
The proposed mechanism is :
Step 1 : [tex]H_2(g)+ICl(g)\rightarrow HI(g)+HCl(g)[/tex] (slow)
Step 2: [tex]HI(g)+ICl(g)\rightarrow I_2(g)+HCl(g)[/tex] (fast)
The combined chemical equation will be :
[tex]H_2(g)+2ICl(g)\rightarrow I_2(g)+2HCl(g)[/tex]
A catalyst is a substance which enhances the rate of chemical reaction without being consumed in the chemical reaction. Thus catalyst gets used up in first step and gets regenerated in second.
HI is formed as an intermediate as it gets formed in first step and gets used up in the second step.
Here there is no substance which is used as a catalyst.
In forming a chelate with a metal ion, a mixture of free EDTA (abbreviated Y 4 − Y4− ) and metal chelate (abbreviated MY n − 4 MYn−4 ) can buffer the free metal ion concentration at values near the dissociation constant of the metal chelate, just as a weak acid and a salt can buffer the hydrogen ion concentration at values near the acid dissociation constant. The equilibrium M n + + Y 4 − − ⇀ ↽ − MY n − 4 Mn++Y4−↽−−⇀MYn−4 is governed by the equation K ′ f = α Y 4 − ⋅ K f = [ MY n − 4 ] [ M n + ] [ EDTA ] Kf′=αY4−⋅Kf=[MYn−4][Mn+][EDTA] where K f Kf is the association constant of the metal and Y 4 − Y4− , α Y 4 − αY4− is the fraction of EDTA in the form Y 4 − Y4− , and [ EDTA ] [EDTA] is the total concentration of free (unbound) EDTA EDTA . K ′ f Kf′ is the conditional formation constant. How many grams of Na 2 EDTA ⋅ 2 H 2 O Na2EDTA⋅2H2O (FM 372.23 g/mol) should be added to 1.97 1.97 g of Ba ( NO 3 ) 2 Ba(NO3)2 (FM 261.35 g/mol 261.35 g/mol ) in a 500. mL volumetric flask to give a buffer with p Ba 2 + = 7.00 pBa2+=7.00 at pH 10.00? log K f logKf for Ba − EDTA Ba−EDTA is 7.88 7.88 and α Y 4 − αY4− at pH 10.00 is 0.30. mass Na 2 EDTA ⋅ 2 H 2 O.
Final answer:
To prepare the buffer, you would need to add 2.808 grams of Na2EDTA · 2H2O to the 500 mL volumetric flask containing 1.97 grams of Ba(NO3)2. This will give the desired buffer with a pBa2+ of 7.00 at pH 10.00.
Explanation:
To calculate the mass of Na2EDTA · 2H2O needed to prepare the buffer, we need to use the equation:
Kf' = αY4− · Kf = [MYn−4][Mn+][EDTA]
Given that log Kf = 7.88 and αY4− = 0.30, we can rearrange the equation to solve for the concentration of MYn−4:
[MYn−4] = Kf' / (αY4− · Kf) = 10^(7.00 − 7.88) / (0.30 · 10^7.88) = 0.562 M
Now, we can calculate the moles of Ba(NO3)2:
moles of Ba(NO3)2 = mass / molar mass = 1.97 g / 261.35 g/mol = 0.00754 mol
Since the stoichiometric ratio between Na2EDTA · 2H2O and Ba(NO3)2 is 1:1, the moles of Na2EDTA · 2H2O required is also 0.00754 mol.
Finally, we can calculate the mass of Na2EDTA · 2H2O:
mass = moles × molar mass = 0.00754 mol × 372.23 g/mol = 2.808 g
Warning signs are sometimes placed on aerosol cans to prevent people from throwing them into a fire. What would be true about the contents of the gas in an aerosol can just after it is placed in a fire?
Answer:
Volume stays.
Explanation:
If aerosol can throwing into the fire than the temperature of the aerosol can & the temperature of the contents of the gas in an aerosol will also increase, and it induces the pressure to rise.
Against the sides of the can, the gas molecules will smash rapidly with each other which are present inside an aerosol can, and the proportion of gas will stay the same as earlier. According to the law of conservation of matter, as a result of the heat, the gas particles can not be eradicated or expanded.
Can 1750 mL of water dissolve 4.6 moles of copper sulfate CuSO4
Answer:
No
Explanation:
We first find the solubility of the copper sulphate salt
Number of moles= 4.6 moles
Volume =1.75 L
Molarity= number of moles/ volume = 4.6/1.75= 2.6 molL-1
Hence, only 2.6 moles of Copper II sulphate dissolves in 1.75L of water. Hence 4.6 moles of copper II Sulphate dies not dissolve in 1.75 L of water.
17.131) A 24.0 −mL volume of a sodium hydroxide solution requires 19.5 mL of a 0.193 M hydrochloric acid for neutralization. A 11.0 −mL volume of a phosphoric acid solution requires 34.8 mL of the sodium hydroxide solution for complete neutralization. Calculate the concentration of the phosphoric acid solution
Answer:
The concentration of Phosphoric acid required for the neutralization described = 0.165 M
Explanation:
Given,
Volume of NaOH = V = 24.0 mL
Concentration of HCl = Cₐ = 0.193 M
Volume of HCl = Vₐ = 19.5 mL
NaOH + HCl -----> NaCl + H₂O
1 mole of NaOH reacts with 1 mole of HCl
Using the equivalence point expression
(CₐVₐ)/(CV) = (nₐ/n)
where
Cₐ = concentration of acid = 0.193 M
Vₐ = volume of acid = 19.5 mL
C = concentration of base = ?
V = volume of base = 24.0 mL
nₐ = Stoichiometric coefficient of acid in the balanced equation = 1
n = Stoichiometric coefficient of base in the balanced equation = 1
(CₐVₐ)/(CV) = (nₐ/n)
(0.193 × 19.5)/(C × 24) = 1
(C × 24) = 3.7635
C = (3.7635/24) = 0.157 M
This NaOH is then reacted with phosphoric acid.
Phosphoric acid = H₃PO₄
3NaOH + H₃PO₄ --------> Na₃PO₄ + 3H₂O
3 moles of NaOH reacts with 1 mole of Phosphoric acid.
Using the equivalence point expression
(CₐVₐ)/(CV) = (nₐ/n)
where
Cₐ = concentration of acid = ?
Vₐ = volume of acid = 34.8 mL
C = concentration of base = 0.157 M
V = volume of base = 11.0 mL
nₐ = Stoichiometric coefficient of acid in the balanced equation = 1
n = Stoichiometric coefficient of base in the balanced equation = 3
(CₐVₐ)/(CV) = (nₐ/n)
(Cₐ × 11)/(0.157 × 34.8) = (1/3)
Cₐ × 11 × 3 = 0.157 × 34.8 × 1
33Cₐ = 5.457
Cₐ = (5.457/32)
Cₐ = 0.165 M
Hence, the concentration of Phosphoric acid required for the neutralization described = 0.165 M
Hope this Helps!!!
The acids and bases shown right cover a range of pH values. Use what you know about acids, bases, and concentration to label the test tubes, in order, from most acidic to most basic.
Answer:
.1m HCl 0.001HCl .00001m HCl Distilled water .00001NaOH .001NaOH .01NaOH
Explanation:
Thanks to the person who posted the answers, I just wrote it out so its easier to see. :D
In the given compounds, the most acidic compound is 0.1m HCl and most basic compound is 0.01NaOH.
What are acids and bases?
Acids are those compounds whose has a pH value in the range from 0 to 7 and bases are those compounds which has a pH range from 7 to 14.
pH of any solution will be calculated as:
pH = -log[H⁺], where
[H⁺] = concentration of H⁺ ion and this concentration is present in the form of molarity (molar concentration).
So, pH value is directly proportional to the concentration value of H⁺ ion as concentration of H⁺ ion decreases so acidity also decreases and sequence of given compounds from most acidic to most basic is represented as:
0.1m HCl > 0.001HCl > 0.00001m HCl > Distilled water > 0.00001NaOH > 0.001NaOH > 0.01NaOH.
Hence 0.1m HCl is most acidic and 0.01 NaOH is most basic.
To know more about acidity & basicity, visit the below link:
https://brainly.com/question/940314
Consider the decomposition of a metal oxide to its elements, where M represents a generic metal. M 3 O 4 ( s ) − ⇀ ↽ − 3 M ( s ) + 2 O 2 ( g ) What is the standard change in Gibbs energy for the reaction, as written, in the forward direction? Δ G ∘ rxn = kJ/mol What is the equilibrium constant of this reaction, as written, in the forward direction at 298 K? K = What is the equilibrium pressure of O2(g) over M(s) at 298 K? P O 2 = atm
Answer:
a) ΔGrxn = 6.7 kJ/mol
b) K = 0.066
c) PO2 = 0.16 atm
Explanation:
a) The reaction is:
M₂O₃ = 2M + 3/2O₂
The expression for Gibbs energy is:
ΔGrxn = ∑Gproducts - ∑Greactants
Where
M₂O₃ = -6.7 kJ/mol
M = 0
O₂ = 0
[tex]deltaG_{rxn} =((2*0)+(3/2*0))-(1*(-6.7))=6.7kJ/mol[/tex]
b) To calculate the constant we have the following expression:
[tex]lnK=-\frac{deltaG_{rxn} }{RT}[/tex]
Where
ΔGrxn = 6.7 kJ/mol = 6700 J/mol
T = 298 K
R = 8.314 J/mol K
[tex]lnK=-\frac{6700}{8.314*298} =-2.704\\K=0.066[/tex]
c) The equilibrium pressure of O₂ over M is:
[tex]K=P_{O2} ^{3/2} \\P_{O2}=K^{2/3} =0.066^{2/3} =0.16atm[/tex]
What do all acids produce when dissolved in water
Answer:
hydrogen ions
Explanation:
Acids are substances that when dissolved in water release hydrogen ions, H+(aq). Bases are substances that react with and neutralise acids, producing water. When dissolved, bases release hydroxide ions, OH-(aq) into solution. Water is the product of an acid and base reacting.
When acids dissolve in water, they produce hydrogen ions (H+). This is known as the process of ionization.
The hydrogen ions are responsible for the acidic properties of the solution.When HCl is added to water, it dissociates into hydrogen ions (H+) and chloride ions (Cl-). The presence of hydrogen ions gives the solution acidic properties.
Similarly, other acids such as sulfuric acid, nitric acid, and acetic acid also produce hydrogen ions when dissolved in water.
It's important to note that not all substances that dissolve in water are acids. Acids have a pH value less than 7, and their properties can vary depending on their strength. Strong acids, like hydrochloric acid, completely dissociate in water, producing a large number of hydrogen ions. Weak acids, like acetic acid, only partially ionize, producing fewer hydrogen ions.
Learn more about acids,here:
https://brainly.com/question/29796621
#SPJ6
b. If 20.0 grams of Aluminum and 30.0 grams of chlorine gasſare used, and how many
grams AlCl3 can theoretically be made (3 pts)?
Answer: The mass of [tex]AlCl_3[/tex] theoretically be made can be, 37.4 grams.
Explanation : Given,
Mass of [tex]Al[/tex] = 20.0 g
Mass of [tex]Cl_2[/tex] = 30.0 g
Molar mass of [tex]Al[/tex] = 27 g/mol
Molar mass of [tex]Cl_2[/tex] = 71 g/mol
First we have to calculate the moles of [tex]Al[/tex] and [tex]Cl_2[/tex].
[tex]\text{Moles of }Al=\frac{\text{Given mass }Al}{\text{Molar mass }Al}=\frac{20.0g}{27g/mol}=0.741mol[/tex]
and,
[tex]\text{Moles of }Cl_2=\frac{\text{Given mass }Cl_2}{\text{Molar mass }Cl_2}=\frac{30.0g}{71g/mol}=0.422mol[/tex]
Now we have to calculate the limiting and excess reagent.
The balanced chemical equation is:
[tex]2Al+3Cl_2\rightarrow 2AlCl_3[/tex]
From the balanced reaction we conclude that
As, 3 moles of [tex]Cl_2[/tex] react with 2 moles of [tex]Al[/tex]
So, 0.422 moles of [tex]Cl_2[/tex] react with [tex]\frac{2}{3}\times 0.422=0.281[/tex] moles of [tex]Al[/tex]
From this we conclude that, [tex]Al[/tex] is an excess reagent because the given moles are greater than the required moles and [tex]Cl_2[/tex] is a limiting reagent and it limits the formation of product.
Now we have to calculate the moles of [tex]AlCl_3[/tex]
From the reaction, we conclude that
As, 3 moles of [tex]Cl_2[/tex] react to give 2 moles of [tex]AlCl_3[/tex]
So, 0.422 moles of [tex]Cl_2[/tex] react to give [tex]\frac{2}{3}\times 0.422=0.281[/tex] mole of [tex]AlCl_3[/tex]
Now we have to calculate the mass of [tex]AlCl_3[/tex]
[tex]\text{ Mass of }AlCl_3=\text{ Moles of }AlCl_3\times \text{ Molar mass of }AlCl_3[/tex]
Molar mass of [tex]AlCl_3[/tex] = 133 g/mole
[tex]\text{ Mass of }AlCl_3=(0.281moles)\times (133g/mole)=37.4g[/tex]
Therefore, the mass of [tex]AlCl_3[/tex] theoretically be made can be, 37.4 grams.
Which best defines nitrogen fixation?
A.) the process of creating free nitrogen for plants to absorb
B.) the breakdown of nitrogen in the soil
C.) the conversion of nitrogen gas into a usable form
D.) the destruction of the bonds between nitrogen and other elements
Given the equation representing a system at equilibrium:
PCl5(g) + energy ⇌ PCl3(g) + Cl2(g)
Which change will cause the equilibrium to shift to the right?
(1) adding a catalyst (2) adding more PCl3(g)
(3) increasing the pressure (4) increasing the temperature
Answer:
(4) increasing the temperature
Explanation:
PCl₅(g) + energy ⇌ PCl₃(g) + Cl₂(g)
According to Le Châtelier's Principle, when we apply a stress to a system at equilibrium, the system will respond in a way that tends to relieve the stress.
If you increase the temperature, the position of equilibrium will move to the right to get rid of the added heat.
(1) is wrong. Adding a catalyst does not change the position of equilibrium.
(2) is wrong. If you add more PCl₃, the position of equilibrium will move to the left to get rid of the added PCl₃.
(3) is wrong. The left-hand side has fewer moles of gas. If you increase the pressure, the position of equilibrium will move to the left to relieve the pressure.
Answer: Increasing the temperature
Explanation: If you increase the temperature, the position of equilibrium will shift to the right so it can eliminate the heat.
Which of the following statements will decrease the amount of work the system could perform? (a) Add to the solution (b) Add solid NaOH to the reaction (assume no volume change) (c) Increase the concentration of the (d) Selectively remove (e) Add to the solution
Final answer:
The addition of solid NaOH to a reaction can decrease the amount of work a chemical system can perform by shifting the equilibrium position and altering the concentration of reactants and products involved in work
Explanation:
The statement that will decrease the amount of work the system could perform is (b) Add solid NaOH to the reaction (assume no volume change). In a chemical system, work is related to changing conditions that affect the direction of equilibrium according to Le Chatelier's principle. Adding solid NaOH to a reaction mixture could shift the equilibrium position in a way that may result in the consumption of reactants or products involved in performing work (such as electrical or mechanical work in an electrochemical cell or in muscle contraction). For example, if the reaction were exergonic and NaOH was a product, adding more of it would shift the equilibrium to the left, thereby reducing the amount of work the system could do. This is because there would be a greater proportion of reactants and less of the energy-containing products required to perform work.
2K + 2HBr → 2 KBr + H2
When 5.5moles of K reacts with 4.04moles of HBr, to produce Hydrogen gas(H₂)
●a). What is the limiting reactant?
●b.)What is the excess reactant?
●C.)How much product is produced?
Answer:
[tex]\large \boxed{\text{0.0503 g}}[/tex]
Explanation:
The limiting reactant is the reactant that gives the smaller amount of product.
Assemble all the data in one place, with molar masses above the formulas and masses below them.
M_r: 39.10 80.41 2.016
2K + 2HBr ⟶ 2KBr + H₂
m/g: 5.5 4.04
a) Limiting reactant
(i) Calculate the moles of each reactant
[tex]\text{Moles of K} = \text{5.5 g} \times \dfrac{\text{1 mol}}{\text{31.10 g}} = \text{0.141 mol K}\\\\\text{Moles of HBr} = \text{4.04 g} \times \dfrac{\text{1 mol}}{\text{80.91 g}} = \text{0.049 93 mol HBr}[/tex]
(ii) Calculate the moles of H₂ we can obtain from each reactant.
From K:
The molar ratio of H₂:K is 1:2.
[tex]\text{Moles of H}_{2} = \text{0.141 mol K} \times \dfrac{\text{1 mol H}_{2}}{\text{1 mol K}} = \text{0.0703 mol H}_{2}[/tex]
From HBr:
The molar ratio of H₂:HBr is 3:2.
[tex]\text{Moles of H}_{2} = \text{0.049.93 mol HBr } \times \dfrac{\text{1 mol H}_{2}}{\text{1 mol HBr}} = \text{0.024 97 mol H}_{2}[/tex]
(iii) Identify the limiting reactant
HBr is the limiting reactant because it gives the smaller amount of NH₃.
b) Excess reactant
The excess reactant is K.
c) Mass of H₂
[tex]\text{Mass of H}_{2} = \text{0.024 97 mol H}_{2} \times \dfrac{\text{2.016 g H}_{2}}{\text{1 mol H}_{2}} = \textbf{0.0503 g H}_{2}\\ \text{The mass of hydrogen is $\large \boxed{\textbf{0.0503 g}}$ }[/tex]
Gallium is produced by the electrolysis of a solution made by dissolving gallium oxide in concentrated NaOH ( aq ) . Calculate the amount of Ga ( s ) that can be deposited from a Ga ( III ) solution using a current of 0.710 A that flows for 70.0 min .
Answer:
0.72g of gallium
Explanation:
Equation of the reduction reaction:
Ga^3+(aq) +3e --------> Ga(s)
If it takes 3F coulumbs of electricity to deposit 70g of gallium (relative atomic mass of gallium)
Then (0.710 × 70×60) coulombs of electricity will deposit (0.710 × 70×60) × 70/3F
But F = 96500C or 1Faraday
Therefore:
(0.710 × 70×60) × 70/3×96500
Mass of gallium deposited= 0.72g of gallium
Suppose we have a solution of lead nitrate, Pb(NO3)2(aq). A solution of NaCl(aq) is added slowly until no further precipitation of PbCl2(s) occurs. The PbCl2(s) precipitate is collected by filtration, dried, and weighed. A total of 12.79 grams of PbCl2(s) is ob- tained from 200.0 milliliters of the original solution. Calculate the molarity of the Pb(NO3)2(aq) solution.
Answer:
0.23 mol/L
Explanation:
Step 1:
The balanced equation for the reaction. This is illustrated below:
Pb(NO3)2(aq) + 2NaCl(aq) —> PbCl2(s) + 2NaNO3(aq)
Step 2:
Determination of the number of in 12.79g of PbCl2. This is illustrated below:
Mass of PbCl2 = 12.79g
Molar Mass of PbCl2 = 207 + (2x35.5) = 207 + 71 = 278g/mol
Number of mole of PbCl2 =?
Number of mole = Mass/Molar Mass
Number of mole of PbCl2 = 12.79/278
Number of mole of PbCl2 = 0.046 mole
Step 3:
Determination of the number of mole of Pb(NO3)2 that reacted.
This is illustrated below:
From the balanced equation above,
1 mole of Pb(NO3)2 reacted to produce 1 mole of PbCl2.
Therefore, it will also take 0.046 mole of Pb(NO3)2 to react to produce 0.046 mole of PbCl2.
Step 4:
Determination of the molarity of Pb(NO3)2. This is illustrated:
Mole of Pb(NO3)2 = 0.046 mole
Volume of the solution = 200 mL = 200/1000 = 0.2 L
Molarity =?
Molarity is defined as the mole of solute per unit litre of solution. It is given by:
Molarity = mole of solute /Volume
Molarity of Pb(NO3)2 = 0.046/0.2
Molarity of Pb(NO3)2 = 0.23 mol/L
Determine the amount of heat energy in joules required to raise the temperature of 7.40g of water from 29.0OC to 46.0 OC.
Answer: The amount of heat energy in joules required to raise the temperature is 526 Joules
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
[tex]Q=m\times c\times \Delta T[/tex]
Q = Heat absorbed = ?
m= mass of substance = 7.40 g
c = specific heat capacity = [tex]4.184J/g^0C[/tex]
Initial temperature of the water = [tex]T_i[/tex] = 29.0°C
Final temperature of the water = [tex]T_f[/tex] = 46.0°C
Change in temperature ,[tex]\Delta T=T_f-T_i=(46.0-29.0)^0C=17.0^0C[/tex]
Putting in the values, we get:
[tex]Q=7.40g\times 4.184J/g^0C\times 17.0^0C[/tex]
[tex]Q=526J[/tex]
The amount of heat energy in joules required to raise the temperature is 526 Joules
The amount of heat energy will be "526 J".
Given:
Mass,
m = 7.40 gInitial temperature,
[tex]T_i[/tex] = 29.0°CFinal temperature,
[tex]T_f[/tex] = 46.0°CChange in temperature,
[tex]\Delta T = T_f -T_i[/tex][tex]= 46.0-29.0[/tex]
[tex]= 17.0^{\circ} C[/tex]
The amount of heat energy,
→ [tex]Q = mc \Delta T[/tex]
By substituting the values, we get
[tex]= 7.40\times 4.184\times 17.0[/tex]
[tex]= 526 \ J[/tex]
Thus the above answer is right.
Learn more:
https://brainly.com/question/25603269
A 1.00 g sample of n-hexane (C6H14) undergoes complete combustion with excess O2 in a bomb calorimeter. The temperature of the 1502 g of water surrounding the bomb rises from 22.64◦C to 29.30◦C. The heat capacity of the hardware component of the calorimeter (everything that is not water) is 4042 J/◦C. What is ∆U for the combustion of n-C6H14? One mole of n-C6H14 is 86.1 g.
Answer:
i have an answer but i can only show you because my teacher helped my on it and wrote it down for me to remember! hope this helps!!!
Explanation:
A 1.00 g sample ofn-hexane (C6H14) under-goes complete combustion with excess O2ina bomb calorimeter. The temperature of the1502 g of water surrounding the bomb risesfrom 22.64◦C to 29.30◦C. The heat capacityof the hardware component of the calorimeter(everything that is not water) is 4042 J/◦C.What is ΔUfor the combustion ofn-C6H14?One mole ofn-C6H14is 86.1 g.The specificheat of water is 4.184 J/g·◦C.1.-9.96×103kJ/mol2.-7.40×104kJ/mol3.-1.15×104kJ/mol4.-4.52×103kJ/mol5.-5.92×103kJ/molcorrectExplanation:mC6H8= 1.00 gmwater= 1502 gSH = 4.184 J/g·◦CHC = 4042 J/◦CΔT= 29.30◦C-22.64◦C = 6.66◦CThe increase in the water temperature is29.30◦C-22.64◦C = 6.66◦C. The amount ofheat responsible for this increase in tempera-ture for 1502 g of water isq= (6.66◦C)parenleftbigg4.184Jg·◦Cparenrightbigg(1502 g)= 41854 J = 41.85 kJThe amount of heat responsible for the warm-ing of the calorimeter isq= (6.66◦C)(4042 J/◦C)= 26920 J = 26.92 kJ
How many grams of carbon dioxide are created from the complete combustion of 21.3 L of butane at STP?
Answer:
165.5 g of CO2
Explanation:
We must first put down the balanced reaction equation:
C4H10(g) + 13/2 O2(g) ------> 4CO2(g) + 5H2O(g)
From the reaction equation, one mole of butane occupies 22.4 L hence we can establish the stoichiometry of the reaction thus:
22.4 L of butane created 174 g of CO2
Therefore 21.3 L of butane will create 21.3 × 174/22.4 = 165.5 g of CO2
What temperature must be maintained to ensure that a 1.00 L flask containing 0.0400 mol of oxygen will show a continuous pressure of 0.981 atm?
Answer:
The temperature is 298.9K = 25.75 °C
Explanation:
Step 1: Data given
Volume of the flask = 1.00 L
Number of moles oxygen = 0.0400 moles
Pressure = 0.981 atm
Step 2: Calculate the temperature
p*V = n*R*T
⇒with p = the pressure of oxygen gas = 0.981 atm
⇒with V = the volume of the flask = 1.00 L
⇒with n = the number of moles of oxygen = 0.0400 moles
⇒with R = the gas constant = 0.08206 L*atm/mol*K
⇒with T = the temeprature = TO BE DETERMINED
T = (p*V) / (n*R)
T = (0.981 atm * 1.00 L) / (0.0400 moles * 0.08206 L*atm/mol*K)
T = 298.9 K
The temperature is 298.9K = 25.75 °C
A solution contains Ag and Hg2 ions. The addition of 0.100 L of 1.71 M NaI solution is just enough to precipitate all the ions as AgI and HgI2. The total mass of the precipitate is 39.6 g . Find the mass of AgI in the precipitate. Express your answer to two significant figures and include the appropriate units.
The mass of AgI in the precipitate is approximately 38.65 grams (rounded to two significant figures) with the appropriate units.
To find the mass of AgI in the precipitate, we first need to determine the moles of AgI formed. We'll use the information provided and follow these steps:
1. Write the balanced chemical equation for the precipitation reaction:
[tex]\[ \text{Ag}^+ + \text{I}^- \rightarrow \text{AgI} \][/tex]
[tex]\[ \text{Hg}_2^{2+} + 2\text{I}^- \rightarrow \text{HgI}_2 \][/tex]
2. Determine the limiting reactant:
- For AgI: [tex]\( \text{Ag}^+ + \text{I}^- \)[/tex] (1 mole of Ag per mole of I)
- For HgI2: [tex]\( \frac{1}{2}\text{Hg}_2^{2+} + \text{I}^- \)[/tex] (1 mole of Hg per 2 moles of I)
The limiting reactant is the one that produces the fewer moles of I^-, as it determines the amount of AgI formed.
[tex]\[ \text{moles of I}^- = 0.100 \, \text{L} \times 1.71 \, \text{mol/L} = 0.171 \, \text{mol} \][/tex]
The limiting reactant is AgI, as it requires 0.171 moles of I^-, while HgI2 would require 0.342 moles of I^-.
3. Calculate the moles of AgI formed:
[tex]\[ \text{moles of AgI} = \text{moles of I}^- \times \frac{1 \, \text{mol AgI}}{1 \, \text{mol I}^-} = 0.171 \, \text{mol} \][/tex]
4. Calculate the mass of AgI formed:
[tex]\[ \text{mass of AgI} = \text{moles of AgI} \times \text{molar mass of AgI} \][/tex]
The molar mass of AgI is the sum of the atomic masses of Ag (107.87 g/mol) and I (126.904 g/mol).
[tex]\[ \text{mass of AgI} = 0.171 \, \text{mol} \times (107.87 + 126.904) \, \text{g/mol} \][/tex]
[tex]\[ \text{mass of AgI} \approx 38.65 \, \text{g} \][/tex]
Therefore, the mass of AgI in the precipitate is approximately 38.65 grams (rounded to two significant figures) with the appropriate units.
From this combustion equation, 2CH22 + 3102 - 22H,0 + 2000, calculate the liters of
carbon dioxide produced when 16.9 grams of CH are combusted
Answer : The volume of [tex]CO_2[/tex] produced are, 26.7 liters.
Explanation :
First we have to calculate the moles of [tex]C_{10}H_{22}[/tex]
[tex]\text{Moles of }C_{10}H_{22}=\frac{\text{Given mass }C_{10}H_{22}}{\text{Molar mass }C_{10}H_{22}}=\frac{16.9g}{142g/mol}=0.119mol[/tex]
Now we have to calculate the moles of [tex]CO_2[/tex].
The given combustion reaction is:
[tex]2C_{10}H_{22}+31O_2\rightarrow 22H_2O+20CO_2[/tex]
From the balanced chemical reaction we conclude that,
As, 2 moles of [tex]C_{10}H_{22}[/tex] react to give 20 moles of [tex]CO_2[/tex]
So, 0.119 moles of [tex]C_{10}H_{22}[/tex] react to give [tex]\frac{20}{2}\times 0.119=1.19[/tex] moles of [tex]CO_2[/tex]
Now we have to calculate the volume of [tex]CO_2[/tex] produced.
As we know that, 1 mole of gas occupies 22.4 L volume of gas.
As, 1 mole of [tex]CO_2[/tex] gas occupies 22.4 L volume of [tex]CO_2[/tex] gas.
So, 1.19 mole of [tex]CO_2[/tex] gas occupies 1.19 × 22.4 L = 26.7 L volume of [tex]CO_2[/tex] gas.
Therefore, the volume of [tex]CO_2[/tex] produced are, 26.7 liters.
Why did hurricane Katrina slow down at data point 7 ?
Answer:
Because the hot air from the equator is balance with the cold air from the polar region, meaning the temperature is the right degree, therefore it causes the slowing down of that hurricane.
Explanation:
From your science class you do study the convectional current right? that's what happen on the outside real life
As more than just a result of the equator's hot air being in balance with the poles' cold air, which means the temperature is at the right level, the hurricane is slowed down.
What is hurricane ?Hurricanes are low-pressure systems with organized thunderstorm activity that originate over tropical or subtropical waters. They are sometimes referred to as tropical cyclones in general. The warm ocean waves provide them energy.
When warm, humid air begins to rise over water, hurricanes emerge. Cooler air replaces the rising air. Large clouds and thunderstorms continue to grow as a result of this process. Thanks to the earth's Coriolis Effect, these thunderstorms are still expanding and starting to rotate.
The greatest wind speeds during Katrina's impact near Grand Isle, Louisiana, may have reached 140 mph. The NWS Doppler Radar at Mobile (KMOB) recorded winds of up to 132 mph between 3,000 and 4,000 feet above ground level in the morning as Katrina moved farther north and made a second impact along the Mississippi/Louisiana border.
Thus, the equator's hot air being in balance with the poles' cold air, which means the temperature is at the right level, the hurricane is slowed down.
To learn more about the hurricane, follow the link;
https://brainly.com/question/13661501
#SPJ2
The common laboratory solvent diethyl ether (ether) is often used to purify substances dissolved in it. The vapor pressure of diethyl ether , CH3CH2OCH2CH3, is 463.57 mm Hg at 25 °C. In a laboratory experiment, students synthesized a new compound and found that when 7.745 grams of the compound were dissolved in 159.9 grams of diethyl ether, the vapor pressure of the solution was 457.87 mm Hg. The compound was also found to be nonvolatile and a non-electrolyte. What is the molecular weight of this compound?
Answer: The molecular weight of this compound is 288.4 g/mol
Explanation:
As the relative lowering of vapor pressure is directly proportional to the amount of dissolved solute.
The formula for relative lowering of vapor pressure will be,
[tex]\frac{p^o-p_s}{p^o}=i\times x_2[/tex]
where,
[tex]\frac{p^o-p_s}{p^o}[/tex]= relative lowering in vapor pressure
i = Van'T Hoff factor = 1 (for non electrolytes)
[tex]x_2[/tex] = mole fraction of solute =[tex]\frac{\text {moles of solute}}{\text {total moles}}[/tex]
Given : 7.745 g of compound is present in 159.9 g of diethyl ether
moles of solute = [tex]\frac{\text{Given mass}}{\text {Molar mass}}=\frac{7.745g}{Mg/mol}[/tex]
moles of solvent (diethyl ether) = [tex]\frac{\text{Given mass}}{\text {Molar mass}}=\frac{159.9g}{74.12g/mol}=2.157moles[/tex]
Total moles = moles of solute + moles of solvent = [tex]\frac{7.745g}{Mg/mol}+2.157[/tex]
[tex]x_2[/tex] = mole fraction of solute =[tex]\frac{\frac{7.745g}{Mg/mol}}{\frac{7.745g}{Mg/mol}+2.157}[/tex]
[tex]\frac{463.57-457.87}{463.57}=1\times \frac{\frac{7.745g}{Mg/mol}}{\frac{7.745g}{Mg/mol}+2.157}[/tex]
[tex]M=288.4g/mol[/tex]
Thus the molecular weight of this compound is 288.4 g/mol
Identify each of these substances as acidic, basic, or neutral.
rainwater, pOH = 8.5
cola, pOH = 11
tomato juice, POH = 10
liquid drain cleaner, poH = 0
Answer:
Rain Water: Acidic
Cola: Acidic
Tomato Juice: Acidic
Liquid Drain Cleaner: Basic
Rain Water: Acidic
Cola: Acidic
Tomato Juice: Acidic
Liquid Drain Cleaner: Basic
pHIf the value of pH is 7, then the solution is neutral, if greater than 7 then basic, and if less than 7 then acidic.
The relation between pH and pOH is as follows:-
[tex]pH+pOH=14[/tex]
The value of pH for rain water is 14-8.5=5.5.
So, the rain water is acidic.
The value of pH for cola is 14-11=3.
So, the cola is acidic.
The value of pH for tomato juice is 14-10=4.
So, the tomato juice is acidic.
The value of pH for liquid drain cleaner is 14-0=14
So, the liquid drain cleaner is basic.
Find more information about the pH here,
brainly.com/question/15289741
Which of the following statements is not an accurate description of a factor that contributes to the ordering of the spectrochemical series for ligands and metals? (Select one answer. There is only one correct answer)
a. Strong o-donor ligands raise the energy of the eg orbitals of an octahedral complex.
b. Higher oxidation state metals form stronger bonds with ligands.
c. Ligands such as CO, PPhy, and bipyridine can act as T-acids.
d. The 4d and 5d transition metals are stronger Lewis acids than the 3d transition metals.
e. The electronegativity of the donor atom is the most important factor for ligands
Answer:
Higher oxidation state metals form stronger bong with ligands
Explanation:
Ligand strength are based on oxidation number, group and its properties
Statement e is not an accurate description because the ordering of the spectrochemical series depends on multiple factors, including ligand size, pi-donor or pi-acceptor abilities, and the metal's identity and oxidation state, in addition to electronegativity of the donor atom.
The correct answer to the question "Which of the following statements is not an accurate description of a factor that contributes to the ordering of the spectrochemical series for ligands and metals?" is e. The electronegativity of the donor atom is the most important factor for ligands.
The spectrochemical series is an ordering of ligands based on the magnitude of the ligand field splitting parameter (Δoct) they produce in coordination complexes. Contrary to option e, it is not just the electronegativity of the donor atom but also a series of other factors such as the size of the donor atom, the ligand's field strength (pi-donor or pi-acceptor abilities), and the identity of the metal ion and its oxidation state that contribute to the ordering of the spectrochemical series. For example, small neutral ligands with highly localized lone pairs, such as NH₃, produce larger Δoct values which illustrates more than just electronegativity playing a role.
Calculate the amount of heat needed to melt 148. g of solid octane (C8H18 ) and bring it to a temperature of 117.8 degrees c. Round your answer to 3 significant digits. Also, be sure your answer contains a unit symbol.
Answer:
The amount of heat is 84.4894kJ
Explanation:
Given data:
mass of octane=148g
The moles of octane is:
[tex]n_{octane} =148g*\frac{1mol}{114.23g} =1.2956moles[/tex]
The melting point is=-56.82°C
ΔHfus=20.73kJ/mol
The heat of fusion is:
[tex]Q_{fus} =n_{octane} *delta-H_{fus} =1.2956*20.73=26.8578kJ[/tex]
The heat to bring the octane to a temperature of 117.8°C is:
[tex]Q_{2} =mCp(117.8-(56.82))=148*2.23*(117.8+56.82)=57631.5848J=57.6316kJ[/tex]
The total heat in the process is:
Qtotal=Qfus+Q₂=26.8578+57.6316=84.4894kJ
What solution is placed when plating metal with gold?
Answer:
The metal atoms that plate your object come from out of the electrolyte, so if you want to copper plate something you need an electrolyte made from a solution of a copper salt, while for gold plating you need a gold-based electrolyte—and so on
Explanation:
Plz give brainiest
stay safe
Answer:
electrolyte which is made from a solution of copper salt
Explanation: