When a fly collides with a moving car's windshield, the force exerted by both on each other is equal in magnitude due to Newton's Third Law of Motion. The differing outcomes (the fly typically being destroyed while the car remains largely unaffected) are a result of the vastly different masses and resulting accelerations, not a difference in the magnitude of force.
When a fly hits the windshield of a rapidly moving car, an interesting physics principle comes into play, known as Newton's Third Law of Motion. This law states that for every action, there is an equal and opposite reaction. Therefore, the force that the fly exerts on the windshield is equal in magnitude to the force that the windshield exerts on the fly during the collision. However, the outcomes are vastly different for the fly and the car due to their significant difference in mass. The car has a much larger mass and therefore experiences a negligible acceleration from the force, while the light-mass fly undergoes a large acceleration, often resulting in its death.
The Third Law of Motion can be counterintuitive because we observe the effects of the forces differently due to the difference in mass and resulting acceleration. But it’s crucial to understand that in terms of the forces experienced by both objects, they are identical. This is why the correct answer is that neither the car nor the fly experiences a greater force than the other in magnitude during the collision.
If the graphs of the equations in a system of linear equations coincide with each other, what does that tell you about the solution of the system? explain.
Water waves, earthquake waves, sound waves, and the waves that travel down a rope or spring are all examples of what waves.
Which term could be used to explain why someone could safely sit on a hot wooden bench but not a hot metal bench? A. Radiation B. Specific heat capacity C. Convection D. Kelvin
A yellow ball with a mass of 2 kg is rolling across the floor at 3 m/s. A red ball with a mass of 3 kg is rolling across the same floor at 3 m/s. Which ball has greater kinetic energy, and why?
Answer:
The red ball
Explanation:
The red ball has greater kinetic energy, because it has a greater mass.
determine the quantity of work done when a crane lifts a 100-n and block from 2 m above the ground to a 6 m above the ground
Answer: 400 J
Explanation :
Given that,
Force = 100 N
Distance = 6 m - 2 m = 4 m
Now , the work done is equal to the multiplication of the force and distance.
W = F * d
[tex]W = 100\ N\times 4\ m[/tex]
[tex]W = 400 J[/tex]
Hence, the quantity of work done is 400 J
Answer:400j!
Explanation:
the saclike structure that surrounds the glomerulus is the. a. renal pelvis b. calyx c. bowman’s capsule d. cortex e. none of the above
Which of the following best describes a completely elastic collision?
The kinetic energy (K) of the system before the collision equals K after.
The potential energy (U) of the system before the collision equals U after.
The kinetic energy (K) of the system before the collision is greater than K after.
The kinetic energy (K) of the system before the collision is less than K after.,
Answer:
The kinetic energy (K) of the system before the collision equals K after.
Explanation:
An elastic collision is a collision in which there is no net loss in kinetic energy from the system as a result of the collision. The amount of motion and the kinetic energy are conserved quantities in elastic collisions. This means that the kinetic energy (K) of the system before the collision equals K after.
Some collisions between atoms in gases are examples of perfectly elastic collisions.
An electron in the n = 7 level of the hydrogen atom relaxes to a lower energy level, emitting light of 397 nm. what is the value of n for the level to which the electron relaxed?
Answer:
[tex]n_f=2[/tex]
Explanation:
It is given that,
Initially, the electron is in n = 7 energy level. When it relaxes to a lower energy level, emitting light of 397 nm. We need to find the value of n for the level to which the electron relaxed. It can be calculate using the formula as :
[tex]\dfrac{1}{\lambda}=R(\dfrac{1}{n_f^2}-\dfrac{1}{n_i^2})[/tex]
[tex]\dfrac{1}{397\times 10^{-9}\ m}=R(\dfrac{1}{n_f^2}-\dfrac{1}{(7)^2})[/tex]
R = Rydberg constant, [tex]R=1.097\times 10^7\ m^{-1}[/tex]
[tex]\dfrac{1}{397\times 10^{-9}\ m}=1.097\times 10^7\ m^{-1}\times (\dfrac{1}{n_f^2}-\dfrac{1}{(7)^2})[/tex]
Solving above equation we get the value of final n is,
[tex]n_f=2.04[/tex]
or
[tex]n_f=2[/tex]
So, it will relax in the n = 2. Hence, this is the required solution.
The electron relaxes to energy level n = 2
[tex]\texttt{ }[/tex]
Further explanationThe term of package of electromagnetic wave radiation energy was first introduced by Max Planck. He termed it with photons with the magnitude is :
[tex]\large {\boxed {E = h \times f}}[/tex]
E = Energi of A Photon ( Joule )
h = Planck's Constant ( 6.63 × 10⁻³⁴ Js )
f = Frequency of Eletromagnetic Wave ( Hz )
[tex]\texttt{ }[/tex]
The photoelectric effect is an effect in which electrons are released from the metal surface when illuminated by electromagnetic waves with large enough of radiation energy.
[tex]\large {\boxed {E = \frac{1}{2}mv^2 + \Phi}}[/tex]
[tex]\large {\boxed {E = qV + \Phi}}[/tex]
E = Energi of A Photon ( Joule )
m = Mass of an Electron ( kg )
v = Electron Release Speed ( m/s )
Ф = Work Function of Metal ( Joule )
q = Charge of an Electron ( Coulomb )
V = Stopping Potential ( Volt )
Let us now tackle the problem !
[tex]\texttt{ }[/tex]
Given:
initial shell = n₁ = 7
wavelength = λ = 397 nm = 3.97 × 10⁻⁷ m
Unknown:
final shell = n₂ = ?
Solution:
We will use this following formula to solve this problem:
[tex]\Delta E = R (\frac{1}{(n_2)^2} - \frac{1}{(n_1)^2})[/tex]
[tex]h \frac{c}{\lambda} = R (\frac{1}{(n_2)^2} - \frac{1}{(n_1)^2})[/tex]
[tex]6.63 \times 10^{-34} \frac{3 \times 10^8}{3.97 \times 10^{-7}} = 2.18 \times 10^{-18} \times ( \frac{1}{(n_2)^2} - \frac{1}{7^2})[/tex]
[tex]5.01008 \times 10^{-19} = 2.18 \times 10^{-18} \times ( \frac{1}{(n_2)^2} - \frac{1}{7^2})[/tex]
[tex]( \frac{1}{(n_2)^2} - \frac{1}{7^2}) = \frac{45}{196}[/tex]
[tex]\frac{1}{(n_2)^2} = \frac{1}{49} + \frac{45}{196}[/tex]
[tex]\frac{1}{(n_2)^2} = \frac{1}{4}[/tex]
[tex]n_2)^2 = 4[/tex]
[tex]n_2 = \sqrt{4}[/tex]
[tex]\boxed{n_2 = 2}[/tex]
[tex]\texttt{ }[/tex]
Learn morePhotoelectric Effect : https://brainly.com/question/1408276Statements about the Photoelectric Effect : https://brainly.com/question/9260704Rutherford model and Photoelecric Effect : https://brainly.com/question/1458544[tex]\texttt{ }[/tex]
Answer detailsGrade: College
Subject: Physics
Chapter: Quantum Physics
Which best illustrates the way in which radiation transfers thermal energy?
(in order from top to bottom)
A.
B.
C.
D.
The correct answer to the question is B. warm to cold.
EXPLANATION:
Before coming into any conclusion, first we have to understand radiation and conduction.
Radiation is the type of mode of transmission of thermal energy in which the radiations travels through space or vacuum without heating the intervening medium.
On the other hand, conduction is the mode of transmission of heat from one body to another body which are in contact with each other or hotter part to the colder parts of a body without any transport of material particle.
Heat always flows from a body at higher temperature to a body at a lower temperature in absence of external work done. The reverse is not possible in normal case.
Hence, the correct option will be B . It is so because heat is flowing from hot body to cold body, and there is no direct contact between the body. It explains correctly the mode of transmission of thermal energy through the process of radiations.
Radiation is the transfer of thermal energy without needing a material medium, like how the Sun's heat and light reaches the Earth through the vacuum of space.
Explanation:Radiation is the process by which thermal energy is transferred from one place to another without the need for a material medium. This is different from conduction and convection, which are other forms of heat transfer. A good example of this type of thermal energy transfer would be the energy we receive from the sun. The sun emits energy in the form of light and heat, which then travels through the vacuum of space to reach the Earth. The fact that this energy can travel through a vacuum, where there are no air molecules to conduct or convict the heat, demonstrates how radiation works. This is the best illustration of how radiation transfers thermal energy.
Learn more about Radiation here:https://brainly.com/question/4075566
#SPJ6
Given a temperature of 300 Kelvin, what is the approximate temperature in degrees Celsius?
A car is traveling in a circular curve on a horizontal road at constant speed. Name the force that is responsible for causing its circular motion? a the gravity force b the normal force from the road c the friction force from the road d the tension force
The farther the electron is from the nucleus, the more __________________ it has. A) charge B) energy C) mass D) pull
Answer:
B. Energy
Explanation: To pull an electron of outer shell of atom less energy is required. Because work done in pulling electron from outer shell is less( as attraction is weak ) in comparison to work done in pulling an electron from inner shell ( attraction with nucleus is strong). The energy needed to pull out an electron from an atom can be explained by ionization energy. Which means farther the electron is from the nucleus more energy it has.
What is the source of all magnetism?
Gravitational waves
Sound waves
The core of the Earth
Electric current
Electric current. The source of all magnetism is electric current, both at macroscopic and microscopic levels, responsible for phenomena including Earth's magnetic field and ferromagnetism.
The source of all magnetism is electric current. This includes both macroscopic currents, such as those flowing through a wire, and microscopic currents, such as those associated with electrons orbiting an atomic nucleus or the spin of subatomic particles like protons and electrons. In the case of Earth's magnetic field, it is mostly generated by electric currents in the planet's molten outer core. In common materials, magnetism arises from the internal cooperative alignment of electron spins, a phenomenon known as ferromagnetism. The relationship between electricity and magnetism is such that separate north and south magnetic poles, or magnetic monopoles, do not exist; instead, magnetic effects are always due to the presence of electric currents forming magnetic dipoles.
a machine does 1500 joules of work in 30 second What is the power of the machine
The power of the machine is calculated as the work done divided by the time taken, which in this case is 50 watts for a machine that does 1500 joules of work in 30 seconds.
Explanation:To calculate the power of the machine, we need to use the formula power equals work done divided by time taken. In this scenario, the machine does 1500 joules of work in 30 seconds. Using the definition of power (1 watt = 1 joule/second), we can compute the machine's power output.
Power = Work / Time
Power = 1500 joules / 30 seconds
Power = 50 watts
The power of the machine is 50 watts.
Talia is manufacturing rolls of wire for hanging pictures. She needs a material that is ..... so that it can easily be pulled into wire without breaking.
A) Conductive
B) Lustrous
C) Ductile
the correct answer is C. ductile.
Talia needs a ductile material for wire manufacturing, and copper is an example with high tensile strength and superior conductivity, making it suitable for electrical wiring.
Talia requires a material that is ductile for manufacturing rolls of wire for hanging pictures. Ductility is a key characteristic of certain metals that allows them to be drawn into thin wires without breaking. Copper is a prime example of a ductile material, and in addition to its ductility, copper is known for having a high tensile strength and being a very good conductor of electricity due to its low resistivity. These properties make copper an excellent choice for electrical wiring, though other materials like aluminium and gold are also used for specific applications due to their unique advantages, such as aluminium's lower weight and gold's resistance to corrosion.
In the following figure, what is the value of the potential at points a and b?
(Figure 1)
picture a square.There is a 15 v battery on the left side, a 4ohm resistor on top, a 5v battery on the right side and a 1 ohm resistor on bottom.
I need the potential at the upper right corner, and then the potential at the lower left corner.
The potential at point a is 2V, and the potential at point b is 6V.
The circuit has two voltage sources (9V and 6V) and two resistors (2Ω and 1Ω).
To find the potential at point a (the upper right corner), we can use the voltage divider formula: V_a = (6V × 1Ω) / (1Ω + 2Ω) = 2V
To find the potential at point b (the lower left corner), we can again use the voltage divider formula: V_b = (9V × 2Ω) / (1Ω + 2Ω) = 6V
If we changed the 1Ω resistor to a different value, it would affect the voltage drop across it, and therefore the voltage at point b. For example, if the bottom resistor was 0.5Ω instead of 1Ω, the voltage at point b would be higher than 6V. also if the bottom resistor was 2Ω instead of 1Ω, the voltage at point b would be lower than 6V.
Which of the following is a compound machine?
a,a ramp
b, a wheel and axle
c, a pulley
d, a pair of scissors
Option (d) is correct. A pair of scissors is a compound machine.
Further Explanation:
A machine is a device that is used to reduce the human effort and obtain much more output as compared to the input given. A simple lever that is used to lift a load is also a machine as it reduces the human effort.
A simple machine is a machine that has only one machine. For example, a ramp is an inclined plane that helps to cover a height easily. A lever is also a simple machine that is used to multiply the effort to pick up the heavier loads.
A ramp, a wheel and axle and a pulley all are the simple machines. They have only one simple machine in them whereas a pair of scissors is not a simple machine as it has more than one machine in it.
Thus, Option (d) is correct. A pair of scissors is a compound machine.
Learn More:
What type of mirror do dentist use https://brainly.com/question/997618 The amount of kinetic energy an object has depends on its https://brainly.com/question/137098 Which of the following are units for expressing rotational velocity, commonly denoted https://brainly.com/question/2887706
Answer Details:
Grade: Middle School
Chapter: Machines
Subject: Physics
Keywords: Simple machine, compound machine, ramp, wheel and axle, pair of scissors, human efforts, lever, inclined plane.
The Compound machines from the given options is a pair of scissors.
The correct option is D.
Compound machines are mechanical devices composed of two or more simple machines working together to perform a specific task. These machines leverage the principles of simple machines, such as levers, pulleys, and gears, to multiply or redirect force, making it easier to perform work. Compound machines can be found in various applications, from complex industrial machinery to everyday tools like bicycles and cars. They illustrate the concept that combining simple machines can enhance mechanical efficiency and enable humans to accomplish tasks that would otherwise be challenging or impossible.
The compound machine from the given options is a pair of scissors.
A compound machine is a combination of two or more simple machines, which are devices that make work easier by reducing the required force or changing the direction of force. In the case of scissors, they consist of a lever and a wedge. The handles of the scissors act as a lever, while the blades function as wedges.
Therefore, option d, a pair of scissors is the correct answer.
Hence The correct option is D.
Learn more about Compound machines here:
https://brainly.com/question/15321686
#SPJ6
The stemplot below shows the heights (in inches) of students in a class.
Answer:
B 70 inches
Explanation:
In a stem plot the numbers on the left side of the line are called the stem and the value on the right side are called the leaves. The stem represents the tens place while the leaves represent the ones place of a number.
The height of the students are as follows:
52 55 55 56 59
62 64 67 67
70 71
It can be seen that 70 inches is the height of one of the students.
A conducting copper wire has a 2.0mm diametr, a 1.5 length, and a 50 m resistance. What is the resitivity of the wire? What general information would you need to find out in order to answer the question
You have 0.5 l of air at a pressure of 203 kpa and -70°c in a rigid, sealed contaainer. what is the absolute tempertaure of the air
To find the absolute temperature of the air at -70 degree\C, convert the Celsius temperature to Kelvin by adding 273.15, resulting in an absolute temperature of 203.15 K.
The question is seeking the absolute temperature of the air, which requires converting the given Celsius temperature to Kelvin. The absolute zero is -273.15 degree\C on the Celsius scale, which corresponds to 0 K on the Kelvin scale. To convert -70 degree\C to Kelvin, you add 273.15:
-70 degree\C + 273.15 = 203.15 K
Therefore, the absolute temperature of the air in the container is 203.15 Kelvin.
Why are synthetic polymers often used in place of some natural materials?
The synthetic polymers are often used in place of natural materials Because synthetic polymers are cheaper than natural polymers, and natural polymers are also less plentiful.
What are polymers?Any of the groups of organic or synthetic compounds known as polymers are made up of macromolecules, or very large molecules, which are just multiples of simpler chemical building blocks known as monomers. Numerous natural and man-made materials, as well as a large portion of the components in living things, are composed of polymers.
Scientists and engineers use petroleum oil to create synthetic polymers. Nylon, polyethylene, polyester, Teflon, and epoxy are some examples of artificial polymers. It is possible to extract natural polymers from the environment. They frequently consist of water.
To know more about polymers:
https://brainly.com/question/17354715
#SPJ5
A wrench reduces the force needed to tighten a bolt. For this statement to be true, the wrench _____. A. decreases the input force and decreases the input distance B. increases the input force and decreases the input distance C. increases the input force and increases the input distance D. decreases the input force and increases the input distance
Answer:
D
Explanation:
Just looking at the physics of a wrench, it allows us to apply a turning force to an object. The reason a wrench is helpful is that it allows us to create a greater turning force, without necessarily changing the force applied to it.
Using the formula:
Fm = The moment of a force (the turning force)
F = The force applied
d = Distance from the fulcrum that the force is applied
Fm = F x d
This formula basically states that, if the moment of the force (output force) stays constant, then the force must decrease, if the distance increases.
Hence, the further away from the fulcrum that the force is applied (increase input distance), the less force needs to be applied (decrease input force).
During spring semester at mit, residents of the parallel buildings of the east campus dorms battle one another with large catapults that are made with surgical hose mounted on a window frame. a balloon filled with dyed water is placed in a pouch attached to the hose, which is then stretched through the width of the room. assume that the stretching of the hose obeys hooke's law with a spring constant of 76.0 n/m. if the hose is stretched by 2.50 m and then released, how much work does the force from the hose do on the balloon in the pouch by the time the hose reaches its relaxed length?
Which statement correctly lists the electromagnetic waves from highest to lowest energy?
Choose one answer.
a. gamma rays, ultraviolet waves, microwaves
b. radio waves, X-rays, ultraviolet rays
c. microwaves, visible light, gamma rays
d. ultraviolet waves, infrared waves, X-rays
a?
@agent0smith
Answer:
a
Explanation:
A tow truck exerts a force of 8000 N to move a car a distance of 4 m in 20 seconds. Calculate the power of the tow truck..
1. 0.01 W
2. 100 W
3. 1600 W
Answer:
Power = 1600Watts
Explanation:
Power is given by the rate of energy expended or work done by a body (or object).
Power = [tex]\frac{Workdone}{time}[/tex]
Where;
Workdone = Force x distance
=> Power = Force x distance / time -----------------------(i)
According to the question,
Force = 8000N
distance = 4m
time = 20 s
Substitute these values into equation (i) above
=> Power = 8000 x 4 / 20
=> Power = 1600Watts
Therefore the power of the tow truck is 1600Watts
keeping the mass of the balls equal, decrease the distance between them. what happens to the force arrows?
Answer:When the distance between the balls decreases, the size of the arrows increases. This shows that the gravitational pull between the balls also increases.
Explanation:
Edmentum
Dalton’s theory was identified using light microscope images of atoms. the experimental results of other scientists. water vapor and air experiments.
Answer:
C
Explanation:
Answer:
It is C.
Because of his theory water turns into air of a process called evaporation.
And im giving credit to the guy above his awswer
what is the best definition of intensity
a.intensity is the frequency of a wave
b.intensity is the amount of energy a wave carries per second
c. intensity is how well a sound travels through a medium
plzzzzzz help!!!!!!!!
Answer:
B
Explanation:
A is incorrect because intensity is dependent on the amplitude not on the frequency.
B is correct because intensity is the amount of energy a wave carries per second.
C is incorrect because intensity is not how well a sound travels through a medium.
Question 3 Unsaved
Which type of galaxy is the Milky Way ?
Question 3 options:
elliptical
satellite
irregular
spiral
Compared to that of a plane on the ground, Earth’s gravitational pull on a plane 7 miles above Earth is approximately A) zero. B) the same. C) half as much. D) twice as much.