Answer: C.)plant growth
Explanation:
The carbon cycling is a process in which the carbon and it's various organic forms are transformed and delivered to various earth spheres such as biosphere, geospheres, hydrospheres, pedospheres and atmosphere. Carbon is the basic element found in all life forms. The cycling of carbon can best be observed in the plant growth. This is because of the fact that carbon is obtained by the plants in the form of carbon dioxide which is a chief ingredient required for the process of photosynthesis. Photosynthesis is necessary for the plants to produce food in the form of carbohydrates required for the growth and metabolism in plants.
During the process of photosynthesis, plants use energy from the Sun to transform carbon dioxide from the air into A. minerals and liquid carbon dioxide. B. protein and minerals. C. oxygen gas and molecules of sugar.
Photosynthesis is the process through which plants make their own food.
Special structures called chloroplasts—located inside plant cells—help plants capture light energy from the Sun. The plants then use the energy to build molecules of sugar from carbon dioxide gas and water. Oxygen gas is a waste product of photosynthesis. Plants releases this waste oxygen into the air.
I'LL GIVE U BRAINLIEST
Which should be done in case of a laboratory accident? Check all that apply.
a)Stay calm.
b)Read directions completely.
c)Do not try to clean up a spill.
d)Follow the teacher’s directions.
e)Wear appropriate lab attire.
f)Leave the area.
Answer : The correct options are, (a), (c), (d) and (f).
Explanation :
There are some safety rules for science lab when we are performing the experiments :
Always wear the lab coat to protect you from chemicals. Always wear the gloves in your hands. Always wear the face mask to protect you from the pungent smell of chemicals. Always wear the glasses to protect the eyes. Before doing some experiment wash all the materials with distilled water.There are some safety rules for science lab in case of a laboratory accident:
Always stay calm at that time. Do not try to clean up a spill. Always follow the directions of the teacher. Leave the area immediately.Hence, the correct options are, (a), (c), (d) and (f).
Which statement describes the Arrhenius interpretation of acids and bases
Answer:
It is limited to situations that involve aqueous solutions or specific compounds.
Explanation:
the answer was correct on edge
If 0.98 moles of BaCl2 are dissolved in enough water to make a 1.2-liter solution, what is the resulting molarity?
A. 0.55 M BaCl2
B. 0.82 M BaCl2
C. 1.2 M BaCl2
D. 0.45 M BaCl2
The name of the commonly used hardness scale is: specific gravity organic Mohs inorganic
Answer:
The Mohs Hardness Scale is by far the most commonly used hardness scale.
Explanation:
In the balanced redox reaction: 2 cu(s) + s(s) ® cu2s(s), how many electrons are gained or lost by each copper atom? select one:
a. each copper atom gains two (2) electrons.
b. each copper atom gains one (1) electron.
c. each copper atom loses one (1) electron.
d. each copper atom loses two (2) electrons.
Answer: Option (c) is the correct answer.
Explanation:
The given reaction equation is as follows.
[tex]2Cu(s) + S(s) \rightarrow Cu_{2}S(s)[/tex]
The oxidation-reduction half reactions will be as follows.
Oxidation : [tex]Cu(s) \rightarrow Cu^{+} + 1e^{-}[/tex]
Reduction: [tex]S(s) + 2e^{-} \rightarrow S^{2-} [/tex]
By balancing the above half reactions, oxidation-half reaction will be as follows.
[tex]2Cu(s) \rightarrow 2Cu^{+} + 2e^{-}[/tex]
Whereas reduction-half reaction will remain the same.
Hence, it shows that each copper atom is losing one electron to combine with a sulfur atom.
Therefore, we can conclude that each copper atom loses one (1) electron.
How many grams of nickel (+2) are required to replace all of the silver when 15.55 grams of AgNO3 are present?
2AgNO3 + Ni2+ = Ni(NO3)2 + 2Ag+
From the reaction, it can be seen that AgNO3 and Ni2+ has following amount of substance relationshep:
n(AgNO3):n(Ni)=2:1
From the relationshep we can determinate requred moles of Ni2+:
n(AgNO3)=m/M= 15.5/169.87=0.09 moles
So, n (Ni)=n(AgNO3)/2=0.045 moles
Finaly needed mass of Ni2+ is:
m(Ni2+)=nxM=0,045x58.7=2.64g
Tapeworms attach themselves inside the intestines of a pig. the worms then eat the pig's partially digested food. the pig is deprived of nutrients. which type of relationship does this represent?
a. commensalism
b. mutualism
c. competition
d. parasitism
The answer to this question is parasitism.
What is the relationship between a compound and the elements it is made from? (4 points)
The compound takes on a mixture of properties from the elements.
The compound takes on the properties of the stronger element.
The compound may have properties that are very different from those of the elements.
The compound may have the properties of the most abundant element in the compound.
Answer:
The compound may have properties that are very different from those of the elements.
Explanation:
For example - common salt, sodium chloride ( NaCl) has very different properties from sodium and chlorine
A system at equilibrium is placed under stress by adding more reactant. If this reaction has a small equilibrium constant (Keq), how will the addition of this stress affect the equilibrium of this system.
Question options:
The equilibrium will shift to produce more reactant.
The equilibrium will shift to produce more product.
There is no way to predict how the stress will affect this system without more information.
The reaction will generate more heat.
Which of the following is not an example of a scientific model?
Object A has a length of 3 cm, a width of 2 cm, and a height of 4 cm. Object B is dropped into a graduated cylinder. It displaces 19 mL of water. The volume of object A is: A. greater than the volume of object B B. less than the volume of object B C. equal to the volume of object B
Answer:
greater than the volume of object B
Explanation:
What are geometric isomers?
A. compounds that have the same types of atoms arranged in different orders
B. compounds that have the same number of carbon atoms arranged in different orders
C. compounds that have the same atoms arranged in the same order, but with different three-dimensional orientations
D. compounds that have the same atoms arranged in the same order, and have the same three-dimensional orientations
Geometric isomers are compounds with the same atomic and bond composition but different spatial arrangements of the component atoms.
Geometric isomersThey are chemical compounds with the same chemical formula, the same atom/number of atoms with their respective bonds, but different arrangements of the atoms in space.
In other words, they are compounds with the same formula but different geometry of atoms.
When identical ligands are placed in the adjacent positions in geometric isomers, cis is used. When the ligands are in opposite positions, trans is used.
More on geometric isomers can be found here: https://brainly.com/question/13422357
#SPJ5
Which of the following are observations?
- The candle floats.
- The tires are flat.
- The dog is barking.
- The tire is flat because of a decrease in temperature.
- If a person walks by, then the dog will bark.
How many neutrons are in an atom of tin? Round your answer to the nearest whole number.
Answer: 69
Explanation:
As we know that the formula to find the no of neutrons= Atomic mass (A)- atomic number (Z)
No of neutrons (n)=A-Z
n=1189-50
n=69
If you eat 3.00 moles of sugar, how many molecules did you consume?
3.00
2.00 x 10^23 molecules
5.00 x 10^ -24 molecules
1.81 x 10^24 molecules
What is the oxidation state of each element in the species Mn(ClO4)3? I'm going over oxi-redox reactions from a long time ago and I'm trying to remember properly.
Mn=3+
Cl=7+
and oxygen=2- right?
What is the total number of neutrons in an atom of 0-18?
Answer: The number of neutrons in given isotope are 10
Explanation:
Atomic number is defined as the number of protons or electrons that are present in a neutral atom.
Atomic number = number of protons = number of electrons
Mass number is defined as the sum of number of protons and neutrons that are present in an atom.
Mass number = Number of protons + Number of neutrons
The isotopic representation of an atom is: [tex]_Z^A\textrm{X}[/tex]
where,
Z = Atomic number of the atom
A = Mass number of the atom
X = Symbol of the atom
We are given:
An isotope having formula: [tex]_{8}^{18}\textrm{O}[/tex]
Atomic number = Number of protons = 8
Mass number = 18
Number of neutrons = 18 - 8 = 10
Hence, the number of neutrons in given isotope are 10
How many milliliters of a 5.0 M H2SO4 stock solution would you need to prepare 108.0 mL of 0.45 M H2SO4?
To prepare 108.0 mL of a 0.45 M H2SO4 solution, you would need to measure 9.72 mL of the 5.0 M H2SO4 stock solution.
Explanation:To solve this problem, we can use the concept of dilution. The formula for dilution is C1V1 = C2V2, where C1 and V1 are the concentration and volume of the stock solution, and C2 and V2 are the concentration and volume of the diluted solution.
In this case, the given concentration of the stock solution is 5.0 M and the volume of the stock solution needed is unknown. The desired concentration of the diluted solution is 0.45 M and the volume of the diluted solution is 108.0 mL. Plugging in these values into the dilution formula will give us the volume of the stock solution needed.
Let's solve for V1:
(5.0 M)(V1) = (0.45 M)(108.0 mL)
V1 = (0.45 M)(108.0 mL)/(5.0 M)
V1 = 9.72 mL
Therefore, you would need to measure 9.72 mL of the 5.0 M H2SO4 stock solution to prepare 108.0 mL of 0.45 M H2SO4.
How many electrons does the predictable (most common) ion of calcium contain?
half life worksheet answer key 1. How long does it take a 100.00g sample of As-81 to decay to 6.25g?
Answer:
132 seconds ( 2 Minutes 12 seconds).
Explanation:
Half life is basically the time it takes for a compound to decay to half of it's original mass.
In this problem, the compound is As. The half life of As-81 is 33 seconds. This means it takes 33 seconds for 100 g of As-81 to decay to 50g. The question however id to find the time it takes for it to decay to 6.25g.
We find how many half life's it would take,
100 --> 50 (First half life)
50 --> 25 (Second half life)
25 --> 12.5 (Third half life)
12.5 --> 6.25 (Fourth half life)
This means the total time is 4 * 33 (Half life) = 132 seconds ( 2 Minutes 12 seconds).
Which would you expect to experience a greater effective nuclear charge? which would you expect to experience a greater effective nuclear charge? a 2p electron of an atom a 3s electron of a na atom?
Answer:
A 2p electron of a Ne atom
Explanation:
Mastering chemistry
14 POINTS
SUPER EASY
Hydrochloric acid (HCl) is created by a chemical reaction between hydrogen (H) and chlorine (Cl). Which substance is the product of this reaction?
hydrogen
chlorine
hydrochloric acid
Answer:
The product of this reaction is the hydrochloric acid
Explanation:
The compounds required to perform a reaction are the reactants, in this case there are two: hydrogen and chlorine.
The resultant compound is denominated the product. In this case, the hydrochloric acid.
The reaction is:
[tex]Cl_2 + H_2 \longrightarrow 2 HCl[/tex]
How many moles of sodium chloride (NaCl) solute are in 155 grams of an 88.5 percent by mass solution?
A chemistry teacher adds 50.0 mL of 1.50 M H2SO4 solution to 200 mL of water. What is the concentration of the final solution? Use .
Answer:
option A
Explanation:
just took test on e2020
Soda is acidic, I need to know what kind of acid soda includes..
My options are:
1. Sulfuric acid - found in batteries and acid rain.
2. Acetic acid - found in vinegar.
3. Citric acid - found in citrus fruits like lemons and limes.
4. Hydrochloric acid - found in stomach acid and many industrial applications.
Please help it’d mean a lot! <3
In which situation would you expect to have the greatest speed assuming all molucules are eaqual?
A- A 20 Liter container that has 5000 molucules
B- A 20 Liter container that has 1000 molucules
C- A 10 Liter container that has 5000 molucules
D- A 10 Liter container that has 1000 molucules
Which has the lighter mass one mole of platinum or one mole of zirconium?
Describe two uses of surfactants
Answer:
if its on edge this is what it provides!
- Surfactants are used to help improve gas exchange in the lungs of premature infants.
- Surfactants are used to prevent salad dressings from separating.
- Pulmonary surfactants reduce the surface tension of the gas exchange surfaces in the lungs, allowing gases to diffuse more easily.
- Surfactants help the water molecules and oil molecules in salad dressings interact and mix.
Make sure to change up the answer a bit!
How many grams are in 1.68 x 1026 molecules of CO2? (molar mass=44.01 g/mol) (Hint: You will need to use your entire stoichiometry flow chart)
Answer:
There is [tex]12277.494g[/tex] of CO2
Explanation:
We know that the molar mass of CO2 is [tex]44.01\frac{g}{mol}[/tex]
This means that in 1 mole of molecules of CO2 is 44.01 g of CO2
In one mole of molecules of any substance there are N molecules where N is defined as the Avogadro number.
[tex]N=AvogadroNumber=(6.02214076).10^{23}[/tex]
Therefore, we can write that
In [tex](6.02214076).10^{23}[/tex] molecules of CO2 (1 mole of CO2) there is 44.01 g of CO2 ⇒
In [tex](1.68).10^{26}[/tex] molecules of CO2 there will be x grams :
[tex]x=\frac{(44.01).(1.68).10^{26}}{(6.02214076).10^{23}}g=12277.494g[/tex]
We answer that in [tex](1.68).10^{26}[/tex] molecules of CO2 there is [tex]12277.494g[/tex] of CO2