If the apparent magnitude of a star increases,the star get brighter, true or false?
Draw one of the isomeric c5h12o alcohols that can be prepared by lithium aluminum hydride reduction of a ketone.
Determine the molecular formula of a compound that has a molar mass of 183.2 g/mol and an empirical formula of c2h5o2.
Answer:
[tex]C_6H_{15}O_6[/tex]
Explanation:
Hello,
In this case, one computes the molar mass for the given empirical formula as follows:
[tex]M_{empirical}=12*2+1*5+16*2=61g/mol[/tex]
In such a way, one computes how many times the molecular formula's molecular mass is contained into the empirical formula's molecular mass in order to determine the whole number relating them as shown below:
[tex]\frac{183.2g/mol}{61g/mol}=3[/tex]
Finally, the molecular formula is three times the empirical formula, hence:
[tex]C_6H_{15}O_6[/tex]
Best regards.
Calculate the molarity of a solution made by adding 45.4 g of nano3 to a flask and dissolving it with water to create a total volume of 2.50 l.
The molarity of [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex] solution is [tex]\boxed{{\text{0}}{\text{.214 M}}}[/tex].
Further Explanation:
The proportion of substance in the mixture is called concentration. The most commonly used concentration terms are as follows:
1. Molarity (M)
2. Molality (m)
3. Mole fraction (X)
4. Parts per million (ppm)
5. Mass percent ((w/w) %)
6. Volume percent ((v/v) %)
Molarity is a concentration term that is defined as the number of moles of solute dissolved in one litre of the solution. It is denoted by M and its unit is mol/L.
The formula to calculate the molarity of the [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex]solution is as follows:
[tex]{\text{Molarity of NaN}}{{\text{O}}_{\text{3}}}{\text{ solution}} = \frac{{{\text{Moles}}\;{\text{of}}\;{\text{NaN}}{{\text{O}}_{\text{3}}}}}{{{\text{Volume }}\left( {\text{L}} \right){\text{ of}}\;{\text{NaN}}{{\text{O}}_{\text{3}}}{\text{ solution}}}}[/tex] …… (1)
The formula to calculate the moles of [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex]is as follows:
[tex]{\text{Moles of NaN}}{{\text{O}}_{\text{3}}} = \frac{{{\text{Given mass of NaN}}{{\text{O}}_{\text{3}}}}}{{{\text{Molar mass of NaN}}{{\text{O}}_{\text{3}}}}}[/tex] …… (2)
The given mass of [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex] is 45.4 g.
The molar mass of [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex]is 84.99 g/mol.
Substitute these values in equation (2).
[tex]\begin{aligned}{\text{Moles of NaN}}{{\text{O}}_3}&=\left( {{\text{45}}{\text{.4 g}}} \right)\left( {\frac{{{\text{1 mol}}}}{{{\text{84}}{\text{.99 g}}}}} \right)\\&=0.5341\;{\text{mol}}\\\end{aligned}[/tex]
Substitute 0.5341 for the moles of [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex]and 2.50 L for the volume of [tex]{\text{NaN}}{{\text{O}}_{\text{3}}}[/tex] solution in equation (1).
[tex]\begin{aligned}{\text{Molarity of NaN}}{{\text{O}}_{\text{3}}}{\text{ solution}}&=\frac{{{\text{0}}{\text{.5341 mol}}}}{{{\text{2}}{\text{.50 L}}}}\\&=0.21{\text{364 M}}\\&\approx{\text{0}}{\text{.214 M}} \\ \end{aligned}[/tex]
The molarity of the [tex]{\mathbf{NaN}}{{\mathbf{O}}_{\mathbf{3}}}[/tex]solution is 0.214 M.
Learn more:
1. Calculation of volume of gas: https://brainly.com/question/3636135
2. Determine how many moles of water produce: https://brainly.com/question/1405182
Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Concentration terms
Keywords: molarity of NaNO3 solution, 2.50 L, volume of NaNO3 solution, moles of NaNO3, given mass, molar mass, 84.99 g/mol, 45.4 g, 0.214 M, NaNO3, molar mass, given mass.
if 100. mL of 0.800 M Na2SO4 is added to 200. mL of 1.20 M NaCl, what is the concentration of Na+ ions in the final solution? Assume fhat the volumes are additive
The concentration of Na+ ions in the final solution is determined by calculating the total moles of Na+ in the final solution and dividing by the total volume of the solution. In this example, it is calculated to be 1.33 M.
Explanation:
The subject of the question deals with determining the concentration of sodium ions (Na+) in a mixed solution of sodium sulfate (Na₂SO₄) and sodium chloride (NaCl). The concentration of Na+ ions in the solution can be calculated using the molarity (M) relationships of the two solutions.
First, we determine the amount of Na+ contributed from each solution. The Na₂SO₄ solution will contribute 2 moles of Na+ for each mole of Na₂SO₄, and the NaCl solution will contribute 1 mole of Na+ per mole of NaCl.
In Na₂SO₄, mols = Molarity * Volume (L) = 0.800 M * 0.100 L = 0.080 moles. Each mole of Na₂SO₄ gives 2 moles of Na+, hence total moles of Na+ from Na₂SO₄ is 2 * 0.080 = 0.160 moles.
In NaCl, mols = Molarity * Volume (L) = 1.20 M * 0.200 L = 0.240 moles. Total moles of Na+ from NaCl is 0.240 moles. The total Na+ in the solution is the sum of the Na+ from each, so total moles of Na+ = 0.160 + 0.240 = 0.400 moles.
Finally, molarity of Na+ in the final solution is total moles of Na+ divided by total volume (in Liters). Since it is given that volumes are additive, total volume = 0.100 + 0.200 = 0.300 L. Therefore, molarity of Na+ (M) = 0.400 moles / 0.300 L = 1.33 M. So, the concentration of Na+ in the final solution is 1.33 M.
Learn more about Molarity here:https://brainly.com/question/8732513
#SPJ11
The key on a pie chart represents...
Answer:
data that adds up to 100%
Explanation:
Write a net ionic equation to show that acetylsalicylic acid (aspirin), hc9h7o4, behaves as a brønsted-lowry acid in water.
Explanation:
According to the Bronsted-Lowry conjugate acid-base theory:
An acid is defined as a substance which looses donates protons and thus forming conjugate base.A base is defined as a substance which accepts protons and thus forming conjugate acid.Acetylsalicylic acid when dissolved in water donates its proton to form conjugate base and water gains the proton to form conjugate acid.The net ionic equation is given as:
[tex]HC_9H_7O_4(0+H_2O\rightarrow (C_9H_7O_4)^{-}+H_3O^+[/tex]
Select all that apply. According to scientists, the distribution of volcanoes throughout the world… Is fairly even and widespread Forms a specific pattern across fault lines Corresponds to plate boundaries Is constantly changing and shifting
Wade thinks it would be really cool to become a radiologist. Which two skills are important for him to have in order to excel in this career?
A-leadership skills to help oversee the members of the staff within the hospital
B- physical strength to lift heavy equipment and machinery
C-interpersonal skills to talk to patients and help them feel comfortable
D-technical skills to know how to use the machinery and equipment needed for the jobE-public speaking skills to announce research findings in conferences
Jessie has never seen snow, but today the weather conditions may be just right! He knows the temperature on the Fahrenheit thermometer must be _______ degrees or lower for him to see his first snow fall.
A) 32 o
B) 20 o
C) -10 0
D) -32 0
Helium has a density of 1.79 x 10-4 g/mL at standard temperature and pressure. A balloon has a volume of 6.3 liters. Calculate the mass of helium that it would take to fill the balloon
Answer:
1.1 x 10-3 g
Explanation:
What is the number “4” in SiCl4?
If the equilibrium constant kc for the reaction below is 1.71 × 10–1, what will be the equilibrium pressure of no if the initial partial pressures of the three gases are all 1.96 × 10–3 atm? $$
Final answer:
To determine the equilibrium pressure of NO, set up an ICE table using the values of the equilibrium constant (Kc) and initial partial pressures. Assume the increase in NO pressure is 'x' and the decrease in N2O and O2 pressures is '2x' and 'x', respectively. Calculate the equilibrium pressures by adding the initial pressures to their corresponding changes.
Explanation:
To determine the equilibrium pressure of NO, we need to set up an ICE table and use the values of the equilibrium constant (Kc) and initial partial pressures of the three gases. Let's assume the increase in the pressure of NO is 'x'. Since the stoichiometric coefficient of NO is 2, the decrease in the pressures of N2O and O2 will be '2x' and 'x', respectively. The equilibrium partial pressures of the three gases can be calculated by adding the initial pressures to their corresponding changes.
Initial pressures:
N2O: 1.96 × 10-3 atmO2: 1.96 × 10-3 atmNO: 1.96 × 10-3 atmChange in pressures:
N2O: -2xO2: -xNO: xEquilibrium pressures:
N2O: (1.96 × 10-3 - 2x) atmO2: (1.96 × 10-3 - x) atmNO: (1.96 × 10-3 + x) atmSince the equilibrium constant (Kc) is given as 1.71 × 10-1, which represents the ratio of the equilibrium concentrations of products to reactants, we can set up the following equation:
Kc = [NO]2 / ([N2O] * [O2])
Substituting the equilibrium pressures into this equation:
1.71 × 10-1 = ([1.96 × 10-3 + x]2 / ([1.96 × 10-3 - 2x] * [1.96 × 10-3 - x]))
Now, solve this equation to find the value of 'x', which represents the equilibrium increase in the pressure of NO.
Once 'x' is determined, substitute it back into the equations for the equilibrium pressures to calculate the final equilibrium pressures of N2O, O2, and NO.
A certain weak acid, ha, has a ka value of 3.6×10−7. part a calculate the percent ionization of ha in a 0.10 m solution. express your answer to two significant figures and include the appropriate units. view available hint(s)
Final answer:
The percent ionization of HA in a 0.10 M solution, with a Ka of 3.6×10⁻⁷, is approximately 0.19%.
Explanation:
The percent ionization of a weak acid can be calculated using its Ka value and the initial concentration of the acid. For HA, with a Ka of 3.6×10⁻⁷ and an initial concentration of 0.10 M, the percent ionization is determined as follows: First, set up the reaction as HA → H+ + A-. The equilibrium expression is Ka = [H+][A-] / [HA]. Assuming x is the amount ionized, we have Ka = x² / (0.10 - x). Solving this equation for x, we approximate that x is small compared to the initial concentration, so 0.10 - x is nearly 0.10. Therefore, Ka ≈ x² / 0.10 M. Solving for x gives x = sqrt(Ka × 0.10 M), and the percent ionization = (x / 0.10 M) × 100%. Substituting in the given values, we get percent ionization ≈ sqrt(3.6×10⁻⁷ × 0.10 M) / 0.10 M × 100% = 0.19%.
During respiration, a plant uses glucose (sugar) and oxygen to give it the energy it needs to survive. During this process ______ and _____ are released.
Question 6 options:
hydrogen and oxygen
sunlight and water
water and carbon dioxide
nitrogen and carbon dioxide
Answer:
water carbon dioxide
Explanation:
What is the conjugate acid of hpo22− ? express your answer as a chemical formula?
The conjugate acid of HPO2- is H2PO4-.
Explanation:The conjugate acid of HPO2- is H2PO4-.
the theory general relativity was discovered by who
Consider this reaction: 2al(s) + 3 cucl2(aq) → 2alcl3(aq) + 3 cu(s) if the concentration of cucl2 drops from 1.000 m to 0.655 m in the first 30.0 s of the reaction, what is the average rate of reaction over this time interval?
The average rate of reaction for CuCl₂ is found by dividing the concentration change (0.345 M) by the time interval (30.0 s), resulting in an average reaction rate of 0.0115 M/s for both the disappearance of CuCl₂ and the formation of Cu.
The student is asking about calculating the average rate of reaction using changes in the concentration of a reactant over a given time interval. The average rate of reaction can be calculated by dividing the change in concentration of a reactant by the time period over which the change occurred. In this case, the concentration of CuCl₂ drops from 1.000 M to 0.655 M over 30.0 seconds.
To find the average rate at which CuCl₂ has reacted, we can use the formula:
Calculate the change in concentration of CuCl₂:The average rate of reaction for the disappearance of CuCl₂ is 0.0115 M/s. Since the reaction stoichiometry shows 3 moles of CuCl₂ produces 3 moles of Cu, the average rate of formation of Cu is also 0.0115 M/s.
Determine the mass of lithium hydroxide produced when 0.83g of lithium nitride reacts with water
When 0.83g of lithium nitride reacts with water, 1.7g of lithium hydroxide is produced according to the balanced chemical equation and stoichiometry.
Explanation:To determine the mass of lithium hydroxide (LiOH) produced, we first need to understand the balanced chemical equation of the reaction.
Lithium nitride (Li₃N) reacts with water (H₂O) to form lithium hydroxide and ammonia (NH₃), which can be represented as:
Li₃N + 3H₂O → 3LiOH + NH₃
From the equation, we can see that 1 mole of lithium nitride reacts with 3 moles of water to produce 3 moles of lithium hydroxide.
Next, we need to convert the mass of lithium nitride to moles using the molar mass of lithium nitride, which is approximately 34.83 g/mol.
0.83 g Li₃N * (1 mol/34.83 g) = 0.0238 mol
Since the molar ratio of Li₃N to LiOH is 1:3, we multiply this mole by 3 to get the moles of lithium hydroxide produced.
Moles of LiOH = 0.0238 mol * 3 = 0.0714 mol
Finally, we convert the moles of LiOH to grams using the molar mass of LiOH, which is 23.95 g/mol.
Mass of LiOH = 0.0714 mol * 23.95 g/mol = 1.7 g
So, when 0.83g of lithium nitride reacts with water, 1.7g of lithium hydroxide is produced.
Learn more about Lithium Hydroxide Production here:https://brainly.com/question/31023707
#SPJ11
The volume of an automobile air bag was 66.8 l when inflated at 25 °c with 77.8 g of nitrogen gas. what was the pressure in the bag in kpa
An analysis reveals that a substance consists of 26.7% of carbon, 2.24% of hydrogen and 71.1% of oxygen, If the molar mass of the compound is 270.1 g/mol, what is the MOLECULAR Formula?
A car travels 31.2 miles in 36.0 minutes. What is the average speed of the car during this trip, in miles per hour (mph)?
Answer:
0.8 mph
Explanation:
divide distance by time
31.2/ 36 = 0.866..
_____ is the process where the female reproductive cell (egg) is united with the male reproductive cell (sperm).
growth
fertilization
pollination
germination
Write the atomic cores for potassium and chloride ions
The atomic core for a potassium ion (K+) is [Ar]4s¹ without the one electron it loses to become an ion. The atomic core for a chloride ion (Cl-) is [Ne]3s² 3p⁵ with an extra electron gained to fill its 3p orbital.
Explanation:The atomic cores for potassium and chloride ions are represented by their respective electron configurations and their charges after ion formation. Potassium (K) has an atomic number of 19, which means it has 19 electrons. The electron configuration is [Ar]4s¹. When potassium forms an ion, it loses one electron to achieve a noble gas configuration, making it a potassium ion with a charge of +1, represented as K⁺.
Chlorine (Cl) has an atomic number of 17, which means it has 17 electrons. The electron configuration is [Ne]3s² 3p⁵. When chlorine forms an ion, it gains one electron to fill its 3p orbital, becoming a chloride ion with a charge of -1, represented as Cl⁻.
Learn more about Atomic Cores for Ions here:https://brainly.com/question/9092255
#SPJ3
The activation energy for the reaction no2(g)+co(g)⟶no(g)+co2(g) is ea = 100 kj/mol and the change in enthalpy for the reaction is δh = -250 kj/mol . what is the activation energy for the reverse reaction?
Final answer:
The activation energy for the reverse reaction is calculated using the given activation energy for the forward reaction (100 kJ/mol) and the change in enthalpy of the reaction (-250 kJ/mol), resulting in an activation energy of 350 kJ/mol for the reverse reaction.
Explanation:
The question is about finding the activation energy for the reverse reaction based on the given activation energy and the change in enthalpy for the forward reaction. Using the provided data, Ea for the forward reaction is 100 kJ/mol and ΔH for the reaction is -250 kJ/mol.
To find the activation energy for the reverse reaction, we can use the concept that the sum of the activation energies for the forward and reverse reactions is equal to the difference in energy between the products and reactants. This relationship is derived from the potential energy diagram of a chemical reaction.
The activation energy for the reverse reaction can be calculated using the equation:
Ea(reverse) = Ea(forward) + ΔH
Substituting the given values:
Ea(reverse) = 100 kJ/mol - (-250 kJ/mol)
Ea(reverse) = 100 kJ/mol + 250 kJ/mol
Ea(reverse) = 350 kJ/mol
Therefore, the activation energy for the reverse reaction is 350 kJ/mol.
Given the balanced equation 3H2(g)+N2(g)=2NH3(g), calculate the mass of NH3 produced by the complete reaction of 2.55g of H2
The mass of NH3 produced from the complete reaction of 2.55g of H2 is calculated to be 14.45 g, based on the molar masses of H2 and NH3 and the stoichiometry of the given balanced chemical equation.
Explanation:To calculate the mass of NH3 produced by the complete reaction of 2.55g of H2, we first need to determine the molar mass of H2. Knowing that the atomic mass of hydrogen is 1.0, we can say that the molar mass of H2 is 2.0 g/mol. Next, we need to find out how many moles of H2 are in 2.55 g:
Number of moles of H2 = mass (g) / molar mass (g/mol) = 2.55 g / 2.0 g/mol = 1.275 mol
Using the stoichiometry of the balanced equation (N2(g) + 3H2(g) → 2NH3(g)), we can see that 3 moles of H2 produce 2 moles of NH3. Therefore, we can set up a proportion to find the number of moles of NH3 that would be produced from 1.275 moles of H2:
(1.275 mol H2) * (2 mol NH3 / 3 mol H2) = 0.85 mol NH3
Now, to find the mass of NH3, we need to know its molar mass. The atomic mass of nitrogen is 14.0 and hydrogen is 1.0, so the molar mass of NH3 is 14.0 + (3 * 1.0) = 17.0 g/mol. Finally, we can calculate the mass of NH3 produced:
Mass of NH3 = number of moles * molar mass = 0.85 mol * 17.0 g/mol = 14.45 g
What is the empirical formula of a substance that contains 5.28 g of c, 0.887 g of h, and 3.52 g of o?
Final answer:
The empirical formula of the compound is CH2O.
Explanation:
To determine the empirical formula of a substance, we need to find the ratio of the number of atoms of each element in the compound.
Step 1: Convert the given masses of each element to moles. Using the molar mass of each element (C = 12.01 g/mol, H = 1.008 g/mol, O = 16.00 g/mol), we have 5.28 g C = 0.44 mol C, 0.887 g H = 0.877 mol H, and 3.52 g O = 0.22 mol O.
Step 2: Divide each element's mole value by the smallest mole value to get the simplest ratio. In this case, the smallest mole value is 0.22 mol O. Dividing the other mole values by 0.22 gives us 0.44 mol C, 0.877 mol H, and 1 mol O.
The empirical formula of the compound is CH2O.
Hydrogen is used as a rocket fuel because it is very light and reacts explosively and completely with oxygen. for the combustion reaction 2h2(g)+o2(g)⇌2h2o(g) what is the likely magnitude of the equilibrium constant k?
The reaction tends to completion hence K should be in the order of K>103.
The equilibrium constant is a number that indicates the extent to which reactants are converted to products in a chemical reaction. A high value of equilibrium constant indicates that the system contains mostly products and few reactants at equilibrium. A low equilibrium constant indicates that the concentration of reactants is greater than the concentration of products at equilibrium.
For the reaction; 2H2(g) + O2(g) ⇌ 2H2O(g), we know the reaction to be explosive and tend to completion since it is a combustion reaction. This means that the reactants are mostly converted to products and the equilibrium constant will be large. Hence K should be in the order of K>103.
Learn more: https://brainly.com/question/10038290
Hydrogen is used as a rocket fuel because it is very light and reacts explosively and completely with oxygen. For the combustion reaction 2H2(g)+O2(g)⇌2H2O(g) what is the likely magnitude of the equilibrium constant K?
1. K<10−3
2. 10−3
3. K=0
4. K>103
Which of the following is an endothermic reaction?
Question 1 options:
sodium chloride dissolving in water
strong hydrochloric acid dissolving in water
a liquid changing to a gas
sugar dissolving in water
Answer: a liquid changing to a gas
Have a FANTASTIC day!!!
An endothermic reaction is one that absorbs heat. The dissolving of sodium chloride or sugar in water is usually endothermic since these processes typically absorb heat. The transition of a liquid to a gas is also an endothermic process as it requires heat input.
Explanation:An endothermic reaction is a process that absorbs heat from the surroundings. When sodium chloride dissolves in water, it can be an endothermic process as the solution usually gets cooler, indicating that heat is absorbed from the surroundings to break the ionic bonds and dissolve the salt. The dissolving of sugar in water generally is also considered slightly endothermic for similar reasons. A liquid changing to a gas, such as water boiling, is an endothermic process as it requires heat to overcome the intermolecular forces in the liquid. Finally, although dissolving strong hydrochloric acid in water is also an interaction with water, it is typically an exothermic process, where heat is released.
The stalk that holds the anther up so that pollination and fertilization can occur is the _______. :
stigma
style
filament
anther