Answer:
Oil is one of the most efficient and widely used energy resources. These are fossil fuels. When the ancient plant and organisms dies they accumulates at the bottom of the seas, which are then covered by the sediments such as mud and sands, forming various rock layers. These trapped organisms an plants after millions of years turn into fossils, by undergoing the fossilization process. These are non-renewable energy resources or conventional sources of energy. In addition to oil, coal, petroleum and natural gas are also some examples of non-renewable energy.
Thus, the high quality resources or energy such as oil, petroleum and natural gas cannot be recycled.
1. What happens in a ocean-continental collision?
a. montains form
b. continental plate subducts
c. new crust is formed
d. oceanic plate subducts
Answer:
A. Mountain forms
Explanation:
Its due to the continental plate is lighter than the oceanic plate the pale get subducted due to the slab push and slab pull effects. The continental plate further reaching the depth burns due to the pressure and intense temperature also this causing the melting of the rocks and leading to the formation of volcanoes and mountain chains of all sizes. Mountain forms and is composed of lava and basaltic matter from below. The collision of the plate leads to the formation of faults along the boundaries this led to the formation of the many large mountains on earth. The Himalayas are thereby known as the young fold mountains.At rst hydrogen has a spectral line at 165 nm. If the line is observed at 170 nm for the star Proxima, how fast is Proxima moving in km/s
Answer:
9090.90 Km/s
Explanation:
Given:
hydrogen has a spectral line at = 165 nm
Line is observed at = 170 nm
Now, from the Hubble's law
[tex]v=\frac{\Delta\lambda}{\lambda}\times\ C[/tex]
Where,
v is the velocity
Δλ = Change in wavelength = 170 - 165 = 5 nm
λ = Actual wavelength
C is the speed of the light
on substituting the respective values, we get
[tex]v=\frac{5}{165}\times3times10^8[/tex]
or
v = 90.90909 × 10⁵ m/s
or
v = 9090.90 Km/s
Which of the following gases is mainly from incomplete combustion of fossil fuel?
Question 41 options:
CO
SO2
CO2
NO
Answer:
Option (1)
Explanation:
The incomplete combustion of fossil generally occurs when there is less amount of air or oxygen. This incomplete combustion leads to the production of carbon monoxide and carbon along with water. It does not release any carbon dioxide.
The reaction that represents an incomplete combustion is-
Hydrocarbon (fossil) + oxygen (O₂) → Carbon Monoxide (CO) + carbon (C) + water (H₂O) .
This reaction releases this Carbon monoxide which is a very poisonous gas. This gases are trapped in the lungs and it creates difficulty for the blood to carry oxygen. This is the reason why the complete combustion of fossil is more preferred compared to the incomplete combustion.
Hence, the correct answer is option (1).
Answer:
CO (carbon Dioxide)
Explanation:
Fossil fuels such as coal and petroleum products contain carbon (C) and hydrogen (H). When they burn completely, carbon and hydrogen react with oxygen gas to produce carbon dioxide (CO₂) and water (H₂O).
But in incomplete burning, a portion of carbon that contained in fossil fuel is not completely oxidized. As a result carbon monoxide (CO) is produced.
The carbon monoxide is a poisonous gas that affects health. The maximum limit of carbon monoxide production allowed in flue products is 400 ppm (parts per million) and the gas flame produces 0 and 50 ppm of carbon monoxide.
Incomplete combustion results in the production of above 7,000 ppm of carbon monoxide. Such a high concentration of carbon monoxide is a health risk and can be fatal.
Standard form for "No Norwegians are Slavs" (assume true).
Answer:
True
Explanation:
Salvas is Indo European people who speak Slavic languages. And Balto - salvanic group native to central Eurasia and southeastern Europe. From the early 6th century, they have spread to inhabit the majority of central-eastern and southeastern Europe. As today there is a large salvanic population of the North Americans and the and particularly Canada as a result of migration. As salvas can be grouped into orthodox Christianity. There an estimated 360 million Slaves worldwide. such as Russia i.e 130-150, Poland 57-60, Ukraine has 46-51, Serbia has 11-12, Chez republic 10-12, Belarus 10, Slovakia 6. (In terms of 000,000).Final answer:
The statement "No Norwegians are Slavs" refers to the relationship between the Norwegian and Slavic ethnic groups.
Explanation:
The statement "No Norwegians are Slavs" refers to the relationship between the Norwegian and Slavic ethnic groups. In social studies, we study the connections and interactions between different cultures, societies, and ethnic groups. Norway is a Nordic country with its own distinct language (Norwegian) and culture, whereas the Slavs are a diverse group of people with shared historic culture and similar languages, including Bulgarian, Russian, Croatian, and more. Therefore, the statement suggests that there is no overlap or commonality between these two specific ethnic groups.
1)What is the theory of plate tectonics? 2)What is the evidence for the plate tectonics theory? 3)There are seven major crustal plates (name and briefly describe) that make up the earth’s surface. Do they include just continents? 4)What are the major driving forces for earth’s plate motion? 5)Plate tectonics is described as a unifying theory. What major geologic features are explained? 6)Describe the "scientific method". (How do the terms "hypothesis", "theory" and "law" relate to each other?)
1. The theory of plate tectonics is the theory that suggests that there are tectonic plates and they are moving on surface of our planet.
According to this theory, the forces from the mantle layer create a very big pressure on the crust, and they managed to crack it in numerous pieces. It doesn't stop there though, as those same forces actually are moving the tectonic plates in certain direction. This results in different types of interaction between the plates, as they can move away from each other, slide past each other, or collide with each other.
This is what gives the basis of the formation of the majority of the physical features on the surface on our planet, but it can also influence on destroying physical features.
2. There are several evidence that point to the plate tectonics theory and that it is in fact a real process that is happening on our planet constantly.
The puzzle like matching of certain parts of the continents, especially the eastern coast of South America and the Western coast of Africa, is one evidence, as they look like they have been together but then broken apart.
The mid-ocean ridges provide evidence about the formation of new crust. They also show how the crust is pushed sideways, in the manner that the youngest crust is at the mid-ocean ridge itself, while the bigger the distance from it, the older the crust is.
The fossil records are another evidence. There are lot of fossils of the same species that have been found in continents that are not connected in the present. This is simply not possible, as even if the same species is put in another location, it will gradually evolve new characteristics because of the environment. This has been the case with fossils of the same species being found on Antarctica, South America, and Africa, pointing that once these three continents were part of one larger land mass.
3. There are seven major tectonic plates on Earth, but also several smaller ones. Most of the major plates are continental: African, Eurasian, North American, South American, Indo-Australian, and Antarctic plates. Only one of the major plates is actually oceanic, and that is the Pacific plate.
Not to be mistaken though, big portions of the continental tectonic plates are actually under water, as they are not all above it and creating enormous land mass, just that the crust doesn't have the oceanic plate composition.
The Eurasian plate is the largest of the continental plates, stretching from the eastern side of Iceland to the eastern part of Siberia.
The North American plate is stretching from the western side of Iceland to the eastern part of Siberia.
The African plate is actually in a process of divergence, as it splits into two separate plates gradually, the Somali and Nubian plates.
The Indo-Australian plate has been formed by the merging of the Indian and Australian plates, though India is part of Asia and it seems the other way.
The South American plate is gradually moving toward west an it will most probably isolate itself from North America, while the Antarctic plate is moving toward the lower latitudes, so in millions of years in the future it will probably not be frozen anymore. T
he Pacific plate is by far the largest of any other oceanic plate, but it is decreasing in size from all sides, as it subducts below continental plates on all sides.
4. The tectonic plates need to experience enormous amount of force upon them in order to be able to move. This enormous amount of force comes from below them, from the mantle layer. These forces are known as convection currents.
The convection currents are circular movements of material in the mantle layer, between its upper and lower parts. This happens because of the difference in density and temperature between the material in its upper and lower part.
The material that is in the upper part is cooler and it has bigger density, while the material in the lower part has higher temperature and lower density. The material from the upper part sinks gradually toward the bottom as it is heavier, while the material from the bottom moves upward as it is lighter. Once the material from the top that came to the bottom becomes hotter and less dense, it moves in the opposite direction, thus upward, and the process constantly continues. The movement upwards creates enormous pressure on the crust, resulting in cracking it, as well as moving slowly on the surface of our planet.
A.7.2. Apply (APPENDIX A pp. 878).
A1. Convert the values on the left to the units at right, using a table of conversions. a. 50 miles =? km b. 15 knots = ? m s–1 c. 30 lb in–2 =? kPa d. 5000 kW =? horsepower e. 150 lbMass =? kg f. 150 lbForce =? N g. 12 ft = ? m h. 50 km h–1 = ? m s–1
Answer:
a) 80 km
b) 7.65 m/s
c) 206.7 kPa
d) 6700 horsepower
e) 67.3 kg
f) 666 N
g) 3.6 m
h) 13.88 m/s
Explanation:
a. we know that 1 mile = 1.6 km
[tex]50 miles = (50 \times 1.6) km = 80 km[/tex]
b. we know that 1 knot = 0.51 m/s
[tex]15 knots = (15 \times 0.51) m/s = 7.65 m/s[/tex]
c. we knwo that 1 lb/inch^2 = 6.89 kPa
[tex]30 lb/inch2 = (30 \times 6.89) kPa = 206.7 kPa
[/tex]
d. we know that 1 kilowatt = 1.34 horsepower
[tex]5000 kW = (5000 \times 1.34) horsepower = 6700 horsepower[/tex]
e. we know that 1 lbMass = 0.45 kg
[tex]150 lb = (150 \times 0.45) kg = 67.3 kg[/tex]
f. we know that 1 lbForce = 4.44 N
[tex]150 lbf = (150 \times 4.44) N = 666 N[/tex]
g. we know that 1 ft = 0.3 m
[tex]12 ft = (12\times 0.3) m = 3.6 m[/tex]
h. we know that 1 km/h = 0.27 m/s
[tex]50 km/h = (50\times 0.27) m/s = 13.88 m/s[/tex]
Question 12 (1 point) Over the course of the year, the Sun's declination ... A) decreases B) increases and decreases C) increases D) stays the same
Answer:
B) increases and decreases
Explanation:
Sun's declination is the angular distance from north to south of the celestial equator. The delineations of the sun change from 23.5 degrees North to 23.5 degrees South and back again during a year. As the seasons change the time the sun stays at the earth atmosphere also changes from day to night like at the time of Solstice in winter and summer. The dates of these solstices change from time to time according to the rotation of the earth. As te places on the earth latitude have delineated over the period that has caused the coordinates to change continuously. There is an increase and then decrease of this definition from east to west in some latitudes and west to est in others related to the north and south pole alignments of the earth.The Sun's declination changes throughout the year, it increases and decreases due to the tilt of the Earth's axis and its orbit around the Sun, affecting seasons and daylight length.
Explanation:The question refers to the pattern of changes in the Sun's declination throughout the year. The Sun's declination, which is the angle between the rays of the sun and the plane of the Earth's equator, increases and decreases over the course of a year. This is due to the tilt of the Earth's axis and its orbit around the Sun, causing the Sun to appear higher in the sky during summer and lower during winter in any hemisphere. This variation is what leads to the changing seasons and the difference in the length of daylight throughout the year.
Question 10(Multiple Choice Worth 1 points) Which trophic level is most likely to contain the largest population of organisms within an ecosystem? First trophic level Second trophic level Third trophic level Fourth trophic level Fifth trophic level
Answer:
First trophic level
Explanation:
The energy distribution among the trophic levels varies greatly. In general, we can say that the lower the trophic level is, the more energy it has, and the higher the trophic level is, the less energy it has.
This same principle goes for the population size in the trophic levels as well. The lower the trophic level is, the higher the population is, the higher the trophic level, the lower the population is.
These two things are connected. The populations in the lower trophic levels are higher because there is much more energy, while the populations in the higher trophic levels have lower populations because the energy available is much smaller.
The first trophic level has the highest populations by far, and the reason behind it is that the organisms of this trophic level are actually able to produce their own food, thus energy.
The first trophic level, consisting of producers, contains the largest population of organisms in an ecosystem due to direct energy from photosynthesis and the energy loss at higher levels.
First trophic level: Contains producers that convert solar energy into chemical energy via photosynthesis. They support all other trophic levels.Second trophic level: Consists of primary consumers (herbivores) that eat producers.Third trophic level: Made up of secondary consumers (carnivores) that eat primary consumers.Fourth trophic level: Includes tertiary consumers (higher-level carnivores) that eat secondary consumers.Fifth trophic level: Contains quaternary consumers, although such levels are rare in nature.Generally, fewer organisms occupy higher trophic levels due to the decrease in available energy. Each trophic level loses approximately 90% of the energy from the previous level, so fewer organisms can be sustained. This is why producers at the first trophic level have the largest populations.
Sedimentary, igneous, and metamorphic rocks can each have a distinctive appearance in the landscape, often allowing us to recognize these rocks from a distance. Classify the following description of a landscape to the rock type exposed at the surface. Sandstone or Shale, or Limestone or Igneous rocks or Metamorphic rocks
The description of a landscape can help us determine the type of rocks that are exposed at the surface, such as sedimentary, igneous, or metamorphic rocks.
Explanation:The description of a landscape can help us determine the type of rocks that are exposed at the surface.
Sedimentary rocks, such as sandstone, shale, and limestone, can often be recognized by their distinct appearance in the landscape.
ous rocks, such as basalt and granite, form from the cooling and solidification of molten magma.
Metamorphic rocks are formed when existing rocks are altered by heat and pressure.
"The correct classification for the landscape described below is Sandstone.
The landscape described below has a characteristic appearance that can be associated with a particular type of rock. Let's analyze the description and classify the rock type:
- The description mentions layered outcrops with visible cross-bedding. Cross-bedding is a sedimentary structure where the layers of sediment are deposited at an angle to the main bedding plane. This feature is commonly found in sandstone, which is a type of sedimentary rock composed mainly of sand-sized mineral particles or rock fragments.
- The presence of fossilized ripples also indicates a sedimentary origin. Fossilized ripples are the remains of ancient ripples that were preserved in the sediment, suggesting that the rock formed in a water environment where ripples could develop.
- Cliffs with varying shades of red, brown, and yellow can be associated with sandstone, as the color variations are often due to the presence of iron oxides and other minerals within the sandstone layers.
- Evidence of weathering into rounded boulders can occur with many types of rock, but when combined with the other clues, it supports the classification as sandstone. Sandstone can weather into rounded shapes due to processes like wind erosion.
Based on these observations, the landscape is most consistent with an exposure of sandstone at the surface. Shale is another sedimentary rock that can form layered outcrops, but it is generally finer-grained and less likely to show cross-bedding or weather into large boulders.
Limestone can also form cliffs and may contain fossils, but it is typically composed of calcium carbonate and is less likely to exhibit the range of colors described. Igneous and metamorphic rocks are usually not layered in the same way as sedimentary rocks and do not typically show cross-bedding or fossilized ripples. Therefore, the landscape is best classified as being underlain by sandstone."
4. How does sediment in an alluvial fan compare with sediment in a deep marine basin, and how did they come to be so different?
Answer:
Oceans are an accumulation feature and alluvial fan are depositional feature
Explanation:
An alluvial fan is a triangular-shaped deposit that is often referred to as alluvium. Are an example of unconsolidated sedimentary deposits, and thus tend to be larger and more predominant in arid and semi-arid regions. They are typically found in mountainous regions where there is a rapid change in slope. Various types of fan are a proximal fan, medial fan, and the distal fan. An oceanic basin is a hydrologically formed and covers about 70% of the earth's surface, they collect sediments that are eroded by the continents known as clastic sediments, as well as precipitous sediments. As alluvial fans feature is associated with elevated highlands the upliftment is necessary as compared to the oceanic basins there exist mid-oceanic ridges and abyssal hills and plains.Why is there is only a small difference in temperature between day and night, while the land experiences a much greater variation?
Answer:
The temperature in the day time is comparatively higher than the temperature at night time. It is because during the day time, there is the presence of the clouds and the atmosphere is comprised of water vapor, that gets heated up when sunlight falls on earth. So the temperature increases. Whereas, during the night time, there occurs no cloud and no sunlight that can warm up the atmosphere. So the heat energy that was trapped in the day time is easily released into the outer atmosphere (space), thereby decreasing the temperature.
Due to this reason, there occurs a certain amount of temperature difference between the day and night.
Answer:
The temperature in the day time is comparatively higher than the temperature at night time. It is because during the day time, there is the presence of the clouds and the atmosphere is comprised of water vapor, that gets heated up when sunlight falls on earth. So the temperature increases. Whereas, during the night time, there occurs no cloud and no sunlight that can warm up the atmosphere. So the heat energy that was trapped in the day time is easily released into the outer atmosphere (space), thereby decreasing the temperature.
Due to this reason, there occurs a certain amount of temperature difference between the day and night.
What very successful Miocene period primate is most likely ancestral to the living apes? (Hint: this genus had at least four distinct species).
Proconsul
Ramapithecus
Aegyptopithecus
Zinjanthropus
Sivapithecus
Answer:
Proconsul
Explanation:
Proconsul is an extinct genus of primate. It is widely considered to be the ancestor of all the primates that we know at present, such as the chimpanzee, gorilla, gibbons, orangutans, and of course us, the humans.
This genus of primate had mixed characteristics, something like a cross between the monkeys of the Old World and the primates. Simply it can be said that the four species of this genus were transitional species from monkeys toward primates.
The four known species of Proconsul all lived in Africa, and the main difference between them was the size. The period in which the Proconsul existed was the Miocene, between 25 and 23 million years ago.
In which aspects do the nanotechnology improves enhanced oil recovery(EOR)?
Answer:
Nanotechnology helps to improve viscous fingering and the nano-particles can transmit through nanopores of sandstone which helps to increase the recovery by decreasing the surface tension between oil and water. The pore spaces are very fine so water molecules cannot penetrate through all of them in order to push the oil. This is why the nano-particles such as iron (Fe) and Silicon (Si) are used with distilled water. These particles can easily move through the interconnected pores and thereby pushes the oil to move out of it. It is a widely accepted concept in Enhanced Oil Recovery (EOR).
Final answer:
Nanotechnology enhances enhanced oil recovery (EOR) by improving oil's properties for easier extraction, increasing porosity and permeability of reservoir rocks, and targeting specific reservoir zones more efficiently. This technological advancement supports more sustainable oil extraction techniques, such as carbon dioxide injection, and helps to extend the life of oil fields.
Explanation:
Nanotechnology significantly improves aspects of enhanced oil recovery (EOR) through innovative methods that increase the efficiency and effectiveness of oil extraction. Primary recovery methods only extract about 30% of crude oil, while EOR techniques, aided by nanotechnology, can significantly increase this percentage. One notable application of nanotechnology in EOR is the injection of nanoparticles to change the properties of oil, making it easier to extract from rock pores. These nanoparticles can alter the oil's viscosity and surface tension, facilitating its flow towards the production wells. Furthermore, nanotechnology applications in EOR include improving porosity and permeability of the reservoir rocks, targeting specific oil reservoir zones for increased precision in oil extraction, and enhancing the recovery rates from previously uneconomical or depleted fields. This technological advancement aligns with the sustainable technique of carbon dioxide injection for removing more oil, thereby not only extending the life of oil fields but also improving the control of unintended emissions associated with fossil fuel extraction. The integration of nanotechnology in EOR presents a promising avenue for accessing the remaining oil in reservoirs, which current technology accesses only about one-third of.
Define Elment Atom and Compound in paragraph form
Atoms are extremely small particles that constitute a specific type of chemical element and that gives elements their property like color, density, melting point, boiling point, and thermal and electrical conductivity. Elements are substances made from one type of atom that cannot be separated into simpler substances, like sodium, hydrogen, oxygen, and chloride. Lastly, Compounds are substances consisting of two or more elements, whose atoms are chemically joined together; water and salt are examples of compounds because the first is made of hydrogen and oxygen, while the latter is made up of sodium and chloride.
Albedo is a term describing the Earth's ____.
Question 46 options:
Use of energy in biomass production
Refraction of energy
Reflection of solar radiation
Production of radiant heat
Answer:
Albedo is a term describing the Earth's reflection of solar radiation
Explanation:
The definition of albedo is the measurement of the reflection of solar radiation received by a planet, for instance. The problem describes the Eart. Therefore, it is the diffuse reflection of solar radiation. Since it is a reflection, it cannot be a production of radiant heat, nor it is the refraction of energy. Since it is reflected back, albedo cannot be the use of energy in biomass production either.
Suppose Halley's comet orbits the sun every 79 years with an eccentricity of 0.87. What is it's aphelion distance in
au's
Answer:
it's aphelion distance is 18.41 AU
Explanation:
Given data:
eccentricity 0.87
P is period of orbiting = 79
from Kepler's third Law.
P^2 = d^3
where P is the period of orbiting in years, and
d it is orbit semi-major axis in Astronomical Units
1 AU is the average distance between earth and sun
so if P =79, we have
79^2 = d^3
6241 = d^3
d = (6241)^(1/3) = 18.41 AU
Explain how political, economic, and religious forces can affect the diffusion of language.
Answer by using a minimum of 125 words.
Answer:
Explained as below
Explanation:
The political, economic, religious and other forces affect the diffusion of languages in any region as its due to the political features of the territory that the boundaries of one country that touch that of the another and this shows its location in relation to the other countries in the world. Ex of political boundaries. Economically any country on earth has its economy and which may or may not be dependent on the resource of the other nations is in direct relation to the interaction of one nation's language with those of the others. The lifestyles and ways of interactions have indirect communications on the languages in the country. Ex of trade flows. Social or religious factors have a direct bearing upon the linguistic diversity of the region as the so-called world is divided itself into 6 main religions like Christian, Muslims, Hindus, Buddhist, Jain, and jews and there are certain subclasses found within them thus, repeated Interaction of these elements leads to diffusion.Explain where the magma for volcanoes at divergent plate boundaries comes from and how it rises to the surface. In this explanation describe how mantle convection is related to the motion of the tectonic plates.
Answer:
The earth's crust is comprised of lithospheric plates and they are divided into the continental crust (plates) and the oceanic crust (plates). These plates are constantly in motion over the Asthenosphere layer. This motion takes place due to the convection current that initiates in the mantle. This initiation of convection current is because of the heat radiated from the core of the earth. This plate motion takes place in three different ways, such as-
(a) Divergent plate motion
(b) Convergent plate motion
(c) Transform plate motion
In a divergent plate motion, the two plates move in the opposite direction. As a result of which the hot, less dense magma rises up and comes out towards the surface. This magma originates from the deeper mantle due to the convection current.
Hence, the convection current is the main mechanism behind the plate motion.
Why are felsic lava flows so much more viscous than mafic ones?
Answer:
Magma are the hot molten materials that rises up towards the surface due to the increasing force from the depth. These magma when comes out to the surface then they are considered as lava.
The felsic lava are those in which the amount of silica and aluminium is very high. Due to this high silica content, the viscosity is high. The amount of silica present in magma or lava is directly proportional to the viscosity of magma or lava. The felsic lava due to its high viscosity flows sluggishly.
Whereas, the basic lava are those in which the silica content is significantly less. Iron (Fe) and Magnesium (Mg) is mostly present in this type of lava. As a result of which it flows easily without any difficulty.
This is the reason why felsic magma (lava) are more viscous compared to the mafic magma (lava).
Felsic lava flows are more viscous due to their higher silica content, which increases the magma's resistance to flow. This higher viscosity can lead to explosive eruptions as gases become trapped within the magma. Mafic lavas, in contrast, with lower silica content have lower viscosity, which results in smoother flows and gentler, effusive eruptions.
Explanation:Felsic lava flows are more viscous than mafic ones primarily due to the higher silica content in felsic magmas. Viscosity is a critical factor that determines how magma behaves and is also influenced by temperature, the volume of dissolved gases, and the specific minerals present within the magma. Felsic magmas, often associated with minerals like quartz and orthoclase feldspar, are higher in silica and this increased silica content leads to an increase in the magma's resistance to flow, which is described as a higher viscosity. Mafic magmas, consisting of minerals like olivine and pyroxene, are lower in silica and have a lower viscosity, which allows them to flow more smoothly to the surface.
The viscous nature of felsic lavas causes them to flow less easily, which can result in the buildup of pressure in a magma chamber as gases become trapped. This contributes to the potential for more explosive volcanic eruptions when felsic magma does reach the surface. On the other hand, the low-viscosity mafic lavas are associated with gentler, effusive eruptions, which allow for the fluid lava to spread across the surface forming various types of lava flows such as pahoehoe and aa.
Jillian is concerned about the number of aluminum cans she throws away each week. Suggest a reduce, a reuse, and a recycle strategy to help Jillian decrease the amount of aluminum waste she produces. Of the three strategies you suggest, which do you think will most decrease Jillian’s aluminum waste? Explain your answer. (7 points)
Answer:
She needs to waste awareness.
Explanation:
She needs to start a special program and put recycling baskets around the neighborhood. She can also go around house to house and tell people about the consequences. She can use the school and create a club to clean around neighborhoods looking for recycled items. That way she can raise awareness and earn service hours. She can put brochures around with advices and tips.
Consider the natural resources that transcend the borders; e.g. air, water and wildlife. Who do you think should provide and implement the legislature surrounding these important issues?
Answer:
The United Nations
Explanation:
The UN is a global assembly of different countries in the world. To a significant extent, the UN hosts the largest membership of nations in the world today.
The proper use of resources without borders should be under the auspices of the group of nations, UN. Here, nations can easily collaborate on the best way to utilize these border-less resources.
List 4 everyday products that are made from seafloor deposits
Answer:
1. Salts. 2. Oil reserves. 3. Gold deposits. 4. Minerals
Explanation:
As oceans are the lifeblood of the planet they give all the natural resources that we need to live a healthy and economic life. Seafloor contains various features like volcanic vents and trenches. These vents contain massive seafloor sulfur contents. Also, they consist of high-value items like gold, silver deposits as these have been constantly been drilled for such precious metals. Similarly, various minerals and salt content ate known to have been found in these deposits. The presence of active deposits is found near the continental plate boundary. Certain SEZ special economic zones have neb thus made to help preserve the mineral and oil wealth of nations.What is the ozone layer, how was it threatened, and what have we done to fix it? Be as precise and accurate as possible.
Answer:
Ozone is a stratospheric layer of three oxygen atoms, this acts as a blanket to earth.
Explanation:
The depletion of ice caps and the release of harmful gases like methane and CFCs in the environment from vehicle exhausts and Air Conditioners produce the same greenhouse environment that hinders the development of this layer and as result, the impact is seen in the form an ozone hole over Antarctica and Arctic circle. The global data released from LANDSAT and MSS satellites show the catastrophic amount of damage that had been done to the ozone by a mix of these gases that break the atomic structures and hence deplete the life on earth. An example of this is coral bleaching and drastic impact t has on marine life as the Ultraviolet rays hat enter the surface damage skin cells and tissues of these small organisms. Also, associated with the warming of ocean temperature and an increase in salinity, etc.1. What do we mean when we say the Universe is expanding? Is the space between planets in our solar system, or the space between stars in our galaxy expanding, or is something else meant entirely? How does the concept of the expansion of the Universe give us its current age?
2. Carl Sagan famously said that we are "star stuff." In what sense is this true?
3. What is meant by observable Universe? What is the difference between the observable Universe and the entire Universe?
The Universe's expansion refers to the increasing distance between galaxies, supporting an estimate of its age being 13.8 billion years. 'We are star stuff' means life's elements came from stellar phenomena. The observable Universe is all that we can see from Earth, limited by the speed of light and the Universe's age.
Explanation:When we say the Universe is expanding, we mean that the distance between galaxies is increasing over time. This doesn't mean that the space between planets in our solar system or the space between stars in our galaxy is expanding, but rather the vast space between galaxies.
This concept helps us determine the age of the Universe as we can trace the expansion rate backwards in time to get an estimate, currently about 13.8 billion years.
Carl Sagan's quote, "we are star stuff," means that the elements that make up life on Earth originated from stellar phenomena. Stars, during their life and at death, produce and distribute many of the heavy elements found in nature, including the ones necessary for life.
The term observable Universe refers to the portion of the Universe that we can theoretically observe from Earth. It's bounded by the distance light has been able to travel since the Big Bang. The entire Universe is likely much larger, potentially infinite, but due to the speed of light and the age of the Universe, we can't observe it in its entirety.
Learn more about Universe here:https://brainly.com/question/34222987
#SPJ6
The Universe is expanding due to the space between galaxies enlarging, not the space within them. We are made of 'star stuff', as elements composing our bodies originated in stars. The observable Universe is parts of the Universe we can observe from Earth.
Explanation:1. When we say that the Universe is expanding, we're referring to the fact that the space between galaxies is getting larger. This does not, however, mean that the space within galaxies (like those between stars or planets) is expanding. Instead, galaxies are moving away from each other in space. This concept helps us estimate the age of the Universe, as we can measure the rate of expansion (the Hubble Constant) and calculate backwards to when everything would have been a single point - the Big Bang.
2. Carl Sagan's statement that we are 'star stuff' is in reference to the fact that many elements that make up our bodies, such as carbon and nitrogen, originated in stars. When stars die, sometimes through a supernova explosion, these elements are scattered through space and can be incorporated into other structures, such as planets and living organisms.
3. The observable Universe is the part of the Universe which we can technically observe from Earth, restricted by the speed of light. There may be parts of the Universe beyond this boundary which exists, but we can't perceive or measure them because light from there hasn't reached us yet. Therefore the observable Universe may be only a part of the entire Universe.
Learn more about Universe here:https://brainly.com/question/34222987
#SPJ6
Wind power has a cubic dependency on wind speed. How much power will a wind-powered turbine generate for a wind speed of 8 m/s, if it generates 100 kW when the wind speed is 2m/s ?
Answer:
Power generated by wind turbine at 8 m/sec will be 6400 KW
Explanation:
We have given at 2 m/sec power generated by turbine = 100 KW
We know that foe a wind turbine power [tex]P\propto\ v^3[/tex] here P is power and v is velocity of wind
So [tex]P=kv^3[/tex], here k is constant
So [tex]100\times 1000=k\times 2^3[/tex]
k = 12500
Now we have to calculate power at 8 m/sec
So power [tex]P=kv^3=12500\times 8^3=6400\times 10^3W=6400KW[/tex]
So power generated by wind turbine at 8 m/sec will be 6400 KW
distance east or west of the prime meridian is measured in degrees of?
Answer:
Longitude measure the distance east to west of the prime meridian that runs through greenwich england. Degrees are denoted by the greek word lamba.
Explanation:
Longitude gives us an angular measurement from 0 to 180 degrees. Subdivided into 60 minutes and 60 seconds. As longitude is singular at the poles. Earth's tectonic plates move relative to one another in different directions at the speed of 50 to 100mm per year so the movement sin tectonic plates influence the latitudinal rotation which changes from year to year. These vertical lines define the places on the earth with their approximate sea level surfaces. The longitudinal belt is the equator at the zero degrees largest longitude on earth.Question 5(Multiple Choice Worth 3 points) Which of the following contributes to the movement of tectonic plates? I. deposition of sediment on the ocean floor II. push of newly formed crust III. mantle convection I only Ill only I and II ll and IIl I, II, and llI
Answer:
Option (2)
Explanation:
Earth's crust is comprised of lithospheric plates. This lithospheric plates are divided into two types, namely
(1) Oceanic plate
(2)Continental plate
These plates continuously move over the layer of the Asthenosphere, due to the convection current in the mantle. These currents are generated due to the heat energy radiated from the interior of the earth. The magma at the lower mantle near the core-mantle boundary gets heated up and becomes less dense. As a result of which it comes up to the upper mantle, and during this process, it forces the crust to move from place to another forming either of the three plate tectonic boundaries.
This plate motion takes place in three ways and they are as follows-
(a) Divergent plate motion
(b) Convergent plate motion
(c) Transform plate motion
Hence, the correct answer is option (2) i.e III only.
The movement of tectonic plates is primarily driven by mantle convection, where warmer and lighter material rises, and denser, cooler material sinks. This process also contributes to the formation of new crust, which pushes existing plates. However, the deposition of sediment on the ocean floor doesn't significantly contribute to plate movement.
Explanation:The movement of tectonic plates is driven primarily by the convection currents in the mantle below them. In this process, the mantle's heat causes the uplift of warmer and lighter material, whereas cooler and denser material sinks. This circulation is a major force behind the tectonic plates' movement.
Mantle convection also influences the creation of new crust, which contributes to plate tectonics by providing a push to existing crust. This happens at places like the mid-ocean ridges where plates are moving apart.
However, while the deposition of sediment on the ocean floor can cause local changes in the seafloor's shape over geological timescales, it doesn't significantly contribute to tectonic plate movement on a global scale. Its impact is minimal compared to the influence of mantle convection and crust formation.
So the options that contribute to the movement of tectonic plates are II (push of newly formed crust) and III (mantle convection).
Learn more about Plate Tectonicshttps://brainly.com/question/13267093
#SPJ3
The distance-size ratio for the Sun-Nearest other Star system is of an order of magnitude of
Answer:
Proxima Centauri is the closest star to that of the sun and being 4.22 light years away from the earth having an apparent magnitude of 12.95.
Explanation:
Being a small and low mass star locate away from the sun in southern constellation being discovered in 1915 by Robert innings. Having an apparent magnitude of 11.3 having an Astronomical number of 12,950 from the orbital period of 550,000 years. Proxima Centauri is a red dwarf star with a mass of eight times that of sun, and an average density that of sun, more than 85%of the radiation is infrared and has the regular activity of starspots. Being closes to the sun around 32,000 years away. It thass an orbital period of 3.6 to 14 days.Which is accurate about the Earth? Group of answer choices The lithosphere is a layer containing both the uppermost part of the mantle and the crust, where flowing is more common than breaking. The lithosphere is the soft part of the mantle below the asthenosphere. The asthenosphere is a layer containing both the uppermost part of the mantle and the crust, where flowing is more common than breaking. The lithosphere is a layer containing both the uppermost part of the mantle and the crust, where breaking is more common than flowing. The lithosphere is the very center of the Earth. The lithosphere is the soft part of the mantle below the asthenosphere. The asthenosphere is a layer containing both the hottest part of the mantle and the crust, where flowing is more common than breaking.
Answer:
Option (4)
Explanation:
The lithosphere represents the outermost hard layer of the earth. This layer provides all the necessary elements for life to exist and these are available to all the living creatures in the form of soils. The lithosphere is comprised of the crust and the upper part of the mantle. The lithospheric crust on earth is divided into 2 types, namely the continental crust and the oceanic crust. These crusts move over the less dense layer of the asthenosphere, which covers a small portion of the upper portion of the mantle. This motion of plates is due to the convection current that generates in the mantle.
The rocks in the lithosphere are hard and it breaks during deformation.
Thus, the correct answer is option (4).
Asesthnosphere consist of the uppermost part of the mantel.
What forms the upper layer of planet earth ?
Earth is a planet in the solar system that supports life and has layered the earth is a dominant planet that is capable of supporting life. The earth is thus the rocky planet and is layers that support the earth are called the crust, core, and mantel.
As the asthenosphere is a sphere that divides the earth from the crust and core the layer has various properties.
The asthenosphere is a major layer and consists of more than 60% of the earth's mass. This layer holds the crust as crust freely floats on this layer.
Thus the answer is B.
Find out more information about the Earth,
brainly.com/question/13015829.
If all the energy from a 103 W light bulb is emitted at 590.0 nm, what is the energy of each photon in Joule? Planck’s constant is 6.6 x 10-34 J*s and the speed of light is 3.0 x 108 m/s.
Answer:
Energy of each photon is given by [tex]0.0335\times 10^{-17}j[/tex]
Explanation:
We have given wavelength of light [tex]\lambda =590nm=590\times 10^{-9}m[/tex]
Speed of light [tex]c=3\times 10^8m/sec[/tex]
Plank's constant [tex]h=6.6\times 10^{-34}j-s[/tex]
We know that energy of photon is given by [tex]E=h\nu =\frac{hc}{\lambda }[/tex]
So energy is given by
[tex]E=h\nu =\frac{hc}{\lambda }=\frac{6.6\times 10^{-34}\times 3\times 10^8}{590\times 10^{-9}}=0.0335\times 10^{-17}j[/tex]