Answer:
Because of the strong interaction of photons with matter,neutrinos rarely interact with matter
Explanation:
In the core of the sun,nuclear fusion which is a nuclear reaction,produces the photons and neutrinos,for photons to emerge from the sun's core it passes through denser particles colliding and losing energy as it moves at such it can take it up to a million years to emerge from the sun core.Unlike the neutrinos that has more easier path,with little or no collission.
Photons take a long time to exit the sun due to repeated absorption and re-emission by atoms, resulting in a slow, zigzag path. On the other hand, neutrinos, which interact weakly with matter, can pass straight through the sun rapidly, taking just a bit over 2 seconds.
Explanation:The reason why photons take much longer than neutrinos to emerge from the sun is due to their interactions with atoms inside the sun's dense core. When photons, which are energy particles produced by nuclear reactions, try to exit the sun, they end up getting absorbed or scattered by atoms, resulting in their paths being zigzag or random. This absorption and reemission process significantly slows down their journey, causing it to take between an estimated 100,000 to 1,000,000 years for them to reach the surface.
On the other hand, neutrinos, another type of particle produced by nuclear reactions, interact minimally with matter. This weak interaction enables them to pass straight through the sun's interior, reaching its surface in a little over 2 seconds. While photons eventually give up enough energy to become visible light that we see as sunlight, neutrinos escape the sun and radiate into space almost immediately after they're created.
Learn more about Photon and Neutrino Paths here:https://brainly.com/question/33944307
#SPJ12
What factors determine the electrostatic force between two objects?
Answer:
The electrostatic force between two objects depends on two factors.
The first factor is the charge, if the charge of the two objects is large then the magnitude of the electrostatic force between them will also be large.
The second factor is the distance, if the distance between the charge is less the magnitude of electrostatic force will be large vice versa.
We can say that the electrostatic force is directly proportional to charge and inversely proportional to the separation between the charge.
Recent research indicates that the variation in solar output ________.
The variation in solar output, or solar irradiance, can affect Earth's climate. Increased solar output can cause global warming, while decreased output can lead to cooling. These changes may interact with human-induced climate change, adding complexity to the climate scenario.
Explanation:Recent research indicates that the variation in solar output can have significant impacts on Earth's climate. The sun's energy output, also known as solar irradiance, is not constant but changes in cycles. An increase in the sun's solar output can intensify Earth's weather patterns and temperatures, leading to global warming, while a decrease can lead to a period of cooling, which can be severe enough to cause an ice age as what happened during the Maunder Minimum in the 17th century. These are not immediate changes but play out over many generations.
In terms of Earth's climate, the variation in solar output may at times overlap or interact with the effects of human-induced climate change, complicating the overall picture. Therefore, it is crucial to understand both natural and human-induced factors influencing our planet's climate.
Learn more about Variation in Solar Output here:https://brainly.com/question/32889283
#SPJ6
What is zero uniform velocity motion
Answer:
A: In an observer's reference frame, motion lacking uniform velocity includes motion at constant or variable speed in a circle; and motion of a reciprocating device. Supposing the zero refers to the “uniform velocity” rather than the motion removes the possibility of an object at rest.
Explanation:
A 7.7cm length of straight wire run horizontally along a north south line . The wire carries a 3.45 current flowing northward through a uniform 1.25 T magnetic field vertical upward. Find the magnetude and directions of the force wire
Answer:
F = 0.332 N in the east direction
Explanation:
Length, L = 7.7 cm = 7.7 * 0.01 = 0.077 m(along the north south)
Current, I = 3.45 A (northwards)
Magnetic field, B = 1.25 T (vertically upwards)
The magnitude of the force is given by, F = ILBsin90
F = 3.45 * 0.077 * 1.25 * 1
F = 0.332 N
The direction of the force is calculated using the Right Hand Thumb Rule:
It states that "Hold the wire carrying current in your right hand so that the thumb points along the wire in the direction of the current, then the fingers will encircle the wire in the direction of the lines of magnetic force."
Based on the Right Hand Thumb Rule, the magnetic force will act in the east direction
How does temperature affect the density of a material. ?
Help ASAP please also I can’t use an explanation from google...
Answer:
Explanation:
Heating a substance causes molecules to speed up and spread slightly further apart, occupying a larger volume that results in a decrease in density. ... Hot water is less dense and will float on room-temperature water. Cold water is more dense and will sink in room-temperature water.
Waves are used in many practical applications to support work, entertainment, and health. One example is the use of ultrasound imaging to safely track the development of a growing fetus. What is a specific example of a practical application of waves in medicine, entertainment, safety, or other fields? Provide a brief explanation of how the properties of waves are useful to that application.
Answer:
A wave is defined as the disturbance of some property of a medium, be it the density, the pressure, or the electric field, propagating through space and thus transporting energy. An application of waves in medicine is ultrasound examinations. These images are taken in real time, showing the structure and the
movement of the internal organs, as well as the blood that goes through the blood vessels.
In entertainment, a common application of the waves is civil radio communication. This consists of the transmission of the signals of a certain type of electromagnetic waves. When they are modulated, the frequency or amplitude is modified and in this way the information is transmitted, from the emitter to the receivers. Then they transform into electrical impulses and then into audible sounds.
Explanation:
A specific example of a practical application of waves in medicine is the capturing of the body structures to detect abnormalities in them.
The Ultrasound MachineThe ultrasound machine is a device that generates high-frequency sound waves that are reflected off body structures. For example, to detect an abnormality like kidney stones, an ultrasound machine can be used to capture the kidney.
This image will be examined by a medical examiner who analyzes the nature of the stones.
Learn more about the ultrasound machines here:
https://brainly.com/question/6837690
how do you find the velocity of a wave?
Answer:
According to me, v=w×f is the correct formula...
Explanation:
v=w×f :-
where "v" is the waves velocity.where "w" is the wavelength.And where "f" is the frequency of the source.The velocity of a wave can be found by multiplying the wavelength of the wave by its frequency.
Explanation:The velocity of a wave can be found by multiplying the wavelength of the wave by its frequency. The formula for wave speed is v = λf, where v is the velocity, λ is the wavelength, and f is the frequency. For example, if the wavelength of a wave is 2 meters and its frequency is 5 Hz, the velocity of the wave would be 10 m/s. It's important to note that the velocity of a wave is determined by the medium through which it is traveling and not by the amplitude of the wave.
What does the term “agony of defeat” mean to you?
Answer:
The noun agony means acute pain — either mental or physical, but people often use the word hyperbolically: "This paper cut is agony." The noun agony is also used in the common phrase "the thrill of victory and the agony of defeat," which has been the tag-line of ABC's Wide World of Sports for decades.
Explanation:
You wish to lift a 12,000 lb stone by a vertical distance of 15 ft. Unfortunately, you can only generate a maximum pushing force of 2,000 lb. What is the amount of work you must input in order to move the stone
Answer:
5,760,000 lb-ft²/s²
Explanation:
Work done, W = mgy where m = mass of stone = 12,000 lb, g = 32 ft/s² and y = vertical distance = 15 ft.
So, W = mgy = 12,000 lb × 32 ft/s² × 15 ft. = 5,760,000 lb-ft²/s²
A cube 10.0 cm on each side has a density of 2.053 x 10^4 kg/m^3. It’s apparent weight in fresh water is 192 N. Find the buoyant force.
Answer:
9 N
Explanation: Given that L = side of the cube = 10cm = 0.1m
Mass = Density * Volume
Let’s determine the volume of the cube in m^3.
V = L^3
V = 0.1^3 = 0.001m^3
Mass = 0.001 * 2.053 * 10^4 = 20.53kg
Weight = 20.53 * 9.8 = 201.194
Buoyant force = 201.194 – 192 = 9.194 N
This is approximately 9 N.
Given:
Length,
L = 10 cm= 0.1 m
Density,
d = [tex]2.053\times 10^4 \ kg/m^3[/tex]Let,
The volume be in "[tex]m^3[/tex]"
then,
→ [tex]V = L^3[/tex]
[tex]= 0.1^3[/tex]
[tex]= 0.001 \ m^3[/tex]
Now,
→ [tex]Mass = Density\times Volume[/tex]
By putting the values,
[tex]= 0.001\times 2.053\times 10^4[/tex]
[tex]= 20.53 \ kg[/tex]
then,
Weight = [tex]20.53\times 9.8[/tex]
= [tex]201.194[/tex]
hence,
The Buoyant force is:
= [tex]201.194-192[/tex]
= [tex]9.194 \ N[/tex]
Thus the above answer is correct.
Learn more about force here:
https://brainly.com/question/14467280
An object is pulled with two forces, 10 N northward and 15 N southward. The direction of the net force is to the An object is pulled with two forces, 10 N northward and 15 N southward. The direction of the net force is to the south. north. east. west. none of the above SubmitR
Answer:
check image
Explanation:
For any question related to newons law of motion first draw the free body diagram(FBD),
Sunspots change in number and location during the solar cycle. This phenomenon is connected to
Answer:
Continuously changing magnetic field of the Sun
Explanation:
The Sun is made up of plasma and is not solid like our planet. When it rotates the whole of the Sun doesn't rotate with same speed. The equatorial part completes the rotation in just 25 days whereas the poles do it in 35 days. Due to this the magnetic field lines entangle and reorganize them regularly.
The places where the field line exit and enter the surface of the Sun, temperature drops by around 1000 K thus these spots appear black in color and are known as Sun spots.
The magnetic field is not permanent as it will keep changing due to differential rotation. This will result in the change in the no. of location of Sun spots.
If we track the no. of sunspots visible with respect to years we will notice that they follow a cycle of 10.6 years. This is known as Solar cycle in which there comes a solar minima when we see very few sunspots. When it is solar maxima we can see more than 100 sunspots.
How are electromagnetic waves different from ocean waves
Electromagnetic waves can travel through matter and a vacuum, and carry energy via their electric and magnetic fields. Meanwhile, ocean waves are mechanical, requiring water to move and don't carry energy in the same way. This fundamental difference in propagation and energy transfer sets the two apart.
Explanation:Electromagnetic waves and ocean waves differ significantly in their nature and behavior. Electromagnetic waves are disturbances in the electric and magnetic fields and do not require a medium to propagate. They can travel through both matter and a vacuum, such as outer space, and all electromagnetic waves move at the same speed in empty space. This makes them different from other waves, such as sound and water waves, which are mechanical and require a medium (like air or water) to travel through.
On the other hand, ocean waves are mechanical waves that require water to move. These can be modeled using sine or cosine functions, depending on their wavelength, amplitude, and frequency. Unlike electromagnetic waves, ocean waves cannot move through a vacuum or empty space.
Another key difference is in the way electromagnetic waves bring energy into a system due to their electric and magnetic fields. These fields can exert forces and move charges in the system and thus do work on them.
Learn more about Waves Difference here:https://brainly.com/question/33718182
#SPJ11
Electromagnetic waves are produced by the vibration of charged particles, can travel through a vacuum, and always travel at the speed of light. Unlike them, ocean waves require a medium to travel and their properties are influenced by environmental factors.
Differences Between Electromagnetic Waves and Ocean Waves
Electromagnetic waves differ from ocean waves in several fundamental ways. While both are forms of energy propagation, electromagnetic waves are produced by the vibration of charged particles and do not require a medium, meaning they can travel through the vacuum of space. In contrast, ocean waves are mechanical waves that require a medium, such as water, to travel. Electromagnetic waves have both electric and magnetic components and travel at the speed of light, which is a constant 300 million meters per second, regardless of their frequency or wavelength.
Another key difference is in how the waves carry energy. Longer electromagnetic waves, like radio waves, carry less energy and have lower frequencies, while shorter waves, like gamma rays, carry more energy and have higher frequencies. Ocean waves, on the other hand, have their energy and properties determined by factors such as wind, the gravitational pull of the moon, and the Earth's topography.
The fed can attempt to decrease the federal funds rate by
Answer:
purchasing bonds in order to increase the money supply.
Explanation:
The Federal Reserve raises or lowers interest rates through its regularly scheduled Federal Open Market Committee. That's the monetary policy arm of the Federal Reserve Banking System.
The Fed can attempt to increase the federal funds rate by selling Treasury bills, which decreases bank reserves.
Resonance occurs when a force causes an object to vibrate at
Answer:
Its natural frequency
Explanation:
Resonance occurs when a force causes an object to vibrate. The object has a higher probability of doing so at a specific rate called the object's natural frequency or resonant.
The frequency is dependent on the size, shape, and composition and properties of the object involved.
Answer:
Resonance occurs when a force causes an object to vibrate at
its own natural frequency
Explanation:
What is resonance .
This is a phenomenon in which an external force or a vibrating system forces another system around it to vibrate with greater amplitude at a specified frequency of operation.
When an object is forced to vibrate at its natural frequency, resonance occurs. Sound can travel through solids, liquids, gases, and even a vacuum. In order for sound from a speaker to reach a listener, air near the speaker must travel to the listener
What is a forced vibration?
Forced vibration is a type of vibration in which a force is repeatedly applied to a mechanical system.
Forced vibration is when an alternating force or motion is applied to a mechanical system.
How is the reaction quotient used to determine whether a system is at equilibrium?
The reaction quotient (Q) is used to determine whether a system is at equilibrium by comparing it to the equilibrium constant (K).
The reaction quotient (Q) is used to determine whether a system is at equilibrium by comparing it to the equilibrium constant (K).
Here's how the reaction quotient is used to assess the system's status:
1. If Q = K, the system is at equilibrium. This means that the concentrations of the reactants and products in the system are such that the forward and reverse reactions occur at the same rate.
2. If Q < K, the system is not at equilibrium and will shift to the right to reach equilibrium. This indicates that the concentrations of the products are lower than what is required for equilibrium, so the forward reaction will be favored.
3. If Q > K, the system is not at equilibrium and will shift to the left to reach equilibrium. This suggests that the concentrations of the products are higher than what is needed for equilibrium, so the reverse reaction will be favored.
By comparing the reaction quotient (Q) to the equilibrium constant (K), we can determine whether a system is at equilibrium, and if not, in which direction the reaction will proceed to establish equilibrium.
Light striking a metal plate can eject electrons from the plate's surface (this is called the photoelectric effect). Imagine that we place the plate in a vacuum and set up an electric field in the plate's vicinity that is uniform in magnitude and direction such that the electric field vector E at any point near the plate has a magnitude of 1000 N/C and points directly away from the plate, perpendicular to its surface. Electrons ejected by the photoelectric effect will have initial kinetic energies of no more than about 3 eV, where 1 eV = 1.6 x 10^-19 J. Roughly estimate the maximum distance that an ejected electron can get from the plate under these circumstances. (Hint: Consider an analogy to the behavoir of a thrown ball in a uniform gravitational field.)
Answer: The kinetic energy in physics can be defined as the energy possessed by the body when it is in motion relatively to the other bodies. This energy depends on the mass of the body and the square of the velocity. Its measurable unit is in Joules.
Answer and Explanation:
Given data:
The electric field is
E
=
1000
N
/
C
The initial kinetic energy of the ejected electrons is
k
=
3
e
V
=
(
3
×
1.6
×
10
−
19
)
J
The expression for the conservation of energy of the electrons is given by
k
=
U
p
k
=
e
V
Here
U
p
=
e
V
is the potential energy of the electron
Here
V
=
E
d
is the electric potential in electric field
Here
e
=
1.6
×
10
−
19
C
is the charge of the electon
Substituting the values in the above equation as,
k
=
q
V
k
=
e
(
E
d
)
(
3
×
1.6
×
10
−
19
J
)
=
(
1.6
×
10
−
19
C
)
(
1000
N
/
C
)
×
d
d
=
0.003
m
d
=
3
m
m
Explanation:
1.Two skaters, Evelyn and Lily, face each other on near frictionless ice. Evelyn has a mass of 57.4 kg, and Lily has a mass of 48.3 kg. Both are motionless until they push away with a force of 33 N. Then Evelyn has a velocity of 1.4 m/s. What is Lily's velocity
Answer:
-1.67 m/s
Explanation:
We can solve this problem by using the law of conservation of momentum: in fact, since the system is isolated (no external forces, since the ice is frictionless), the total momentum of Evelyin and Lily must be conserved.
The total momentum before is zero, since they are both at rest:
[tex]p_i = 0[/tex]
The total momentum after is:
[tex]p_f = mv+MV[/tex]
where
m = 48.3 kg is Lily's mass
M = 57.4 kg is Evelyin's mass
V = 1.4 m/s is Evelyn's velocity
v is the Lily's velocity
Since momentum is conserved,
[tex]p_i=p_f[/tex]
And so
[tex]0=mv+MV[/tex]
Solving for v, we find Lily's velocity:
[tex]v=-\frac{MV}{m}=-\frac{(57.4)(1.4)}{48.3}=-1.67 m/s[/tex]
And the negative sign indicates that her direction is opposite to Evelyn's direction.
What happens to a flexible container of gas when it is heated
Answer:
There is an increase in volume of the container, because it is a flexible container and he no fixed volume.
Explanation:
Because of the application of temperature , the molecules tends to expand and will try to free up.
Because the container the fas is inside is flexible, it will amount to increase in volume.
V1/T1= V2/T2
Showing the connection between volume and temperature.
What generates the magnetic field that surrounds a wire carrying an electric current?
Answer:
A,B,E
Explanation:
Magnetic fields are produced by moving electric charges.
What is an electromagnet?
Electromagnet is a temporary magnet. It is made by winding wire around an iron core. As current flows in the coil the iron becomes a magnet, and when the current is turned off it looses it's magnetic properties.
Magnetic fields are produced by moving electric charges.
Everything around us is made up of atoms, and each atom has a nucleus made of neutrons and protons with electrons that orbit around the nucleus. The orbiting electrons are tiny moving charges. A small magnetic field is created around each atom.
Magnetic fields produced from charges, similarly to electric fields, but are different in that the charges must be moving.
Long straight wire carrying a current is the example of a moving charge that generates a magnetic field.
Therefore,
Moving electric charges produced magnetic field.
Learn more about electromagnet here:
https://brainly.com/question/3427992
#SPJ2
This is a measure of an object's ability to transmit electricity.
Final answer:
Electrical conductivity is a property indicating how easily electricity can flow through a material, with conductors having high conductivity and insulators having low. Resistance measures how much a material opposes the flow of charge, dependent on the material's resistivity and affected by temperature. Dielectric strength is the maximum electric field an insulator can withstand before conducting.
Explanation:
The measure of an object's ability to transmit electricity is known as its electrical conductivity. Electrical conductivity is a property of materials that indicates how easily electric current can flow through them. Conductors, like copper, gold, and silver, exhibit high electrical conductivity, whereas insulators have much lower electrical conductivity. Electrical conductivity is quantified by the relationship σ = J/E, where σ is the conductivity, J is the current density, and E is the electric field strength. Materials with high conductivity have low resistance, while materials with low conductivity have high resistance. The resistance of a material is influenced by its inherent resistivity and is also affected by factors like temperature.
Resistance is a concept that describes how much a material opposes the flow of electric charge. Highly resistant materials make it difficult for electric current to pass through, necessitating a higher energy (voltage) to drive the current. Additionally, the resistivity of a material is a fundamental property that dictates the resistance of an object made from that material. Superconductors are exceptional in that they have zero resistance at very low temperatures, meaning they can conduct electricity without energy loss.
Another related concept is dielectric strength, which pertains to insulating materials. It is defined as the maximum electric field strength that an insulating material can withstand before it begins to break down and conduct electricity, signifying a loss of its insulating properties.
A4 kg bowling ball begins rolling down a at bowling alloy at 6 m/s . When it strikes the pins, it is estimated to be moving at 5 m/s . How much onergy is lost due to friction?
Answer:
Energy lost due to friction is 22 J
Explanation:
Mass of the ball m = 4 kg
Initially velocity of ball v = 6 m/sec
So kinetic energy of the ball [tex]KE=\frac{1}{2}mv^2[/tex]
[tex]KE=\frac{1}{2}\times 4\times 6^2=72J[/tex]
Now due to friction velocity decreases to 5 m/sec
Kinetic energy become
[tex]KE=\frac{1}{2}\times 4\times 5^2=50J[/tex]
Therefore energy lost due to friction = 72 -50 = 22 J
Final answer:
The energy lost due to friction as a 4 kg bowling ball slows down from 6 m/s to 5 m/s is 22 Joules. This is calculated using the difference between the initial and final kinetic energies.
Explanation:
The subject of this question is Physics, and it pertains to the High School level. The student is looking to understand the energy lost due to friction as a 4 kg bowling ball slows down from 6 m/s to 5 m/s. To calculate the energy lost, we use the kinetic energy formula:
Kinetic Energy (KE) = 1/2 m v^2
We calculate the initial and final kinetic energies and find the difference:
Initial KE = 1/2 (4 kg) (6 m/s)^2 = 72 JoulesFinal KE = 1/2 (4 kg) (5 m/s)^2 = 50 JoulesThe energy lost due to friction is the difference between the initial and final kinetic energies:
Energy lost = Initial KE - Final KE = 72 Joules - 50 Joules = 22 JoulesTo store stacks of clean plates, a cafeteria uses a closed cart with a spring-loaded shelf inside. Customers can take plates off the stack one at a time through a hole in the top. A stack of plates compresses the spring 0.40 m. The spring constant is 240 N/m. What is the elastic potential energy of the spring?
Answer:
19.2J
Explanation:
For a string-mass system the elastic potential energy is given by:
[tex]U=\frac{1}{2}kx^2[/tex]
k: spring's constant = 240N/m
x: compression = 0.40m
by replacing the values of k and x you obtain:
[tex]U=\frac{1}{2}(240N/m)(0.40m)^2=19.2J[/tex]
hence, the elastic potential energy is 19.2J
Answer:
19.2j I took the assessment and got it right :)
Explanation:
HELP ASAP How are the bars in barred spiral galaxies thought to have formed?
A. separation
B. primordial collapse
C. merging
D. slow evolution
Answer:
D. slow evolution
Explanation:
The bars in barred spiral galaxies are formed through ; ( D ) slow evolution
Barred spiral galaxies are galaxies which appear with its center having a bar-shaped structure which is populated with stars, and this is found/commonly seen in about 50% of spiral galaxies.
The bar shaped center helps with the regulation of the movement of stars, dust and gas in the spiral galaxies.The bars are formed as the spiral galaxies continue to evolve slowly overtime.
Hence we can conclude that The bars in barred spiral galaxies are formed through slow evolution.
Learn more : https://brainly.com/question/16337002
How do you find the volume of a rock
Answer:
You put the rock in a graduated cylinder and measure how many milliliters it goes up.
Explanation:
A metal rod A and a metal sphere B, on insulating stands, touch each other. They are originally neutral. A positively charged rod is brought near (but not touching) the far end of A. While the charged rod is still close, A and B are separated. The charged rod is then withdrawn. Is the sphere then positively charged, negatively charged, or neutral?
Answer:
The sphere is positively charged
Explanation:
This is because when the positively charged rod is brought near the metal rod A, the electrons in metal rod A and sphere B are attracted towards it into metal rod A while the positive charges in the are repelled into sphere B. So, when the charged rod is withdrawn, and metal rod A and sphere B are separated, metal rod A is now negatively charged, but sphere B is positively charged.
So, sphere B is positively charged.
Final answer:
After the process of charging by induction and separation while a positively charged rod is nearby, sphere B ends up being positively charged due to a deficit of electrons.
Explanation:
The question revolves around the concept of charging by induction, a fundamental concept in electrostatics within physics. In this situation, a metal rod A and a metal sphere B, both initially neutral and on insulating stands, are in contact. A positively charged rod is brought near rod A, causing electrons in the metal rod and sphere to be attracted towards the end closest to the charged rod. This leaves the portion of rod A farthest from the charged rod, and sphere B, positively charged due to the deficit of electrons.
When A and B are separated while the charged rod is still nearby, this separation of charges is maintained: rod A will retain a surplus of electrons (negatively charged) near the side of the positively charged rod, and sphere B will be left positively charged due to a deficit of electrons. Once the positively charged rod is removed, both objects retain their induction-caused charges. Therefore, sphere B ends up being positively charged.
Which formula is used to find fluctuation of the shape of body
Answer:
varn=n1+1ehvkT–1
Explanation:
This is Einstein's equation.
1 point
If you had an object (m=55kg) with a mechanical energy (TOTAL ENERGY)
of 4,306J and 2,940J of that is potential energy. What is the objects
velocity?
Given that,
Mass of object, m = 55 kg
Mechanical energy of the object, M = 4306 J
Potential energy, P = 2940 J
We know that the mechanical energy is the sum of kinetic and potential energy such that,
Mechanical energy = kinetic energy + potential energy
[tex]K=M-P\\\\K=4306-2940\\\\K=1366\ J[/tex]
Kinetic energy is given by :
[tex]K=\dfrac{1}{2}mv^2[/tex]v is velocity of object
[tex]v=\sqrt{\dfrac{2K}{m}} \\\\v=\sqrt{\dfrac{2\times 1366}{55}} \\\\v=7.04\ m/s[/tex]
So, the velocity of object is 7.04 m/s.
1) Analyze the student data as if you were Ms. Olivera. One group clearly
won the challenge. What aspects of the winning design accounted for
the strength of Group #2's electromagnet?
A)
Using a 9-volt battery for more electrical energy.
Longer wire allows for more turns around the iron
core
More turns of wire around the core and the maximum
voltage
Using a double-nail core and more turns of wire
around that core.
Answer:
I think the answer is C
Explanation:
When you look at the table, two designs used a 9-volt battery, but the second design lifted more wait because the amount of wire they had wrapped around the magnetic core was more.
Group #2's electromagnet was stronger due to the use of a 9-volt battery, longer wire, and a double-nail core.
Explanation:The strength of Group #2's electromagnet can be attributed to several aspects of their design:
Using a 9-volt battery: This provides more electrical energy, which increases the strength of the electromagnet.Longer wire: A longer wire allows for more turns around the iron core, resulting in a stronger magnetic field.Double-nail core: This design feature, along with more turns of wire around the core, further enhances the magnetic strength.By combining these aspects, Group #2 was able to create a stronger electromagnet compared to other groups.
Learn more about electromagnet here:https://brainly.com/question/17057080
#SPJ2
A basketball player makes a jump shot. The 0.599 kg ball is released at a height of 2.18 m above the floor with a speed of 7.05 m/s. The ball goes through the net 3.10 m above the floor at a speed of 4.19 m/s. What is the work done on the ball by air resistance, a nonconservative force?
Answer:
[tex]W_{drag} = 4.223\,J[/tex]
Explanation:
The situation can be described by the Principle of Energy Conservation and the Work-Energy Theorem:
[tex]U_{g,A}+K_{A} = U_{g,B} + K_{B} + W_{drag}[/tex]
The work done on the ball due to drag is:
[tex]W_{drag} = (U_{g,A}-U_{g,B})+(K_{A}-K_{B})[/tex]
[tex]W_{drag} = m\cdot g\cdot (h_{A}-h_{B})+ \frac{1}{2}\cdot m \cdot (v_{A}^{2}-v_{B}^{2})[/tex]
[tex]W_{drag} = (0.599\,kg)\cdot (9.807\,\frac{m}{s^{2}} )\cdot (2.18\,m-3.10\,m)+\frac{1}{2}\cdot (0.599\,kg)\cdot [(7.05\,\frac{m}{s} )^{2}-(4.19\,\frac{m}{s} )^{2}][/tex]
[tex]W_{drag} = 4.223\,J[/tex]
Answer:
W = -4.22 J
Explanation:
Given
m = 0.599 kg
vi = 7.05 m/s
yi = 2.18 m
vf = 4.19 m/s
yf = 3.10 m
We apply the equations of the Principle of Energy Conservation and the Work-Energy Theorem
W = Ef - Ei
W = (Kf + Uf) - (Ki + Ui)
W = (m/2)(vf² - vi²) + mg(yf - yi)
W = (0.599 kg/2)((4.19 m/s)² - (7.05 m/s)²) + (0.599 kg)(9.81m/s²)(3.10 m - 2.18 m)
W = -4.22 J