Why is it important to compensate for pressure and temperature when an orifice is used to measure gas flow

The average atomic weight of Hafnium is calculated by multiplying the atomic weight of each isotope by its relative abundance and summing the products. The result is an average atomic weight of 178.433 amu.

To calculate the average atomic weight of Hafnium (Hf), we multiply the atomic weight of each isotope by its natural abundance, expressed as a fraction, and then sum the results. Here are the calculations:

Adding these products together we get the average atomic weight of Hafnium:

(0.0016 × 173.940) + (0.0526 × 175.941) + (0.1860 × 176.943) + (0.2728 × 177.944) + (0.1362 × 178.946) + (0.3508 × 179.947) = 0.278304 + 9.255366 + 32.922978 + 48.523072 + 24.373172 + 63.079956 = 178.432848 amu

The average atomic weight of Hafnium truncated to three decimal places is 178.433 amu.

https://brainly.com/question/14697166

#SPJ12

Answer : The mass of sodium fluoride added should be 0.105 grams.

Explanation : Given,

The dissociation constant for HF = [tex]K_a=6.8\times 10^{-4}[/tex]

Concentration of HF (weak acid)= 0.0310 M

First we have to calculate the value of [tex]pK_a[/tex].

The expression used for the calculation of [tex]pK_a[/tex] is,

[tex]pK_a=-\log (K_a)[/tex]

Now put the value of [tex]K_a[/tex] in this expression, we get:

[tex]pK_a=-\log (6.8\times 10^{-4})[/tex]

[tex]pK_a=4-\log (6.8)[/tex]

[tex]pK_a=3.17[/tex]

Now we have to calculate the concentration of NaF.

Using Henderson Hesselbach equation :

[tex]pH=pK_a+\log \frac{[Salt]}{[Acid]}[/tex]

[tex]pH=pK_a+\log \frac{[NaF]}{[HF]}[/tex]

Now put all the given values in this expression, we get:

[tex]2.60=3.17+\log (\frac{[NaF]}{0.0310})[/tex]

[tex][NaF]=0.00834M[/tex]

Now we have to calculate the moles of NaF.

[tex]\text{Moles of NaF}=\text{Concentration of NaF}\times \text{Volume of solution}=0.00834M\times 0.300L=0.0025mole[/tex]

Now we have to calculate the mass of NaF.

[tex]\text{Mass of }NaF=\text{Moles of }NaF\times \text{Molar mass of }NaF=0.0025mole\times 42g/mole=0.105g[/tex]

Therefore, the mass of sodium fluoride added should be 0.105 grams.

Answer : The correct option is, (C) NH₃ + H⁺

Explanation:

Hydrolysis : It is defined as the chemical reaction in which the breakdown of compound takes place due to reaction with water.

As per question:

First ammonium chloride completely dissociates into ion.

[tex]NH_4Cl(aq)\rightarrow NH_4^+(aq)+Cl^-(aq)[/tex]

Now ammonium ion react with water to give ammonia and hydronium or hydrogen ion.

The balanced hydrolysis reaction will be:

[tex]NH_4^++H_2O\rightarrow NH_3+H_3O^+[/tex]

Hence, the correct option is, (C) NH₃ + H⁺

Final answer:

The correct response to the products of hydrolysis of NH4Cl is  'NH3 + H+', because, during hydrolysis, NH4Cl separates into NH4+ and Cl- ions, with NH4+ reacting with water to form ammonia (NH3) and hydronium ions (H3O+). So the correct option is  C.

Explanation:

The question asks which response gives the products of hydrolysis of NH4Cl. During hydrolysis, water is involved in breaking down a compound. In the case of NH4Cl, when it is dissolved in water, it separates into NH4+ ions and Cl− ions. The Chloride ion (Cl−) does not hydrolyze as it's the conjugate base of a strong acid (HCl) and has no significant basicity. On the other hand, the Ammonium ion (NH4+) is the conjugate acid of a weak base (NH3), and it will hydrolyze in water. The NH4+ accepts a hydroxide ion (OH−) from water, forming NH3 and H3O+ (hydronium ion). Therefore, the hydrolysis of NH4Cl will result in ammonia (NH3) and hydronium ions (H3O+).

Option C is the correct response: NH3 + H+. When NH4Cl hydrolyzes, it forms ammonia (NH3) and hydronium ions (H3O+), not hydrochloric acid (HCl). The correct formula of the products reflects the ammonia and hydronium ions formed.

Answer:

Explanation:

four carbon atoms ------ atoms ------------nucleus of an atom------------electron

Atoms are the smallest indivisible particle in any substances. But atoms are also made up of other tiny particles which are subatomic in sizes. These particles are protons, neutrons and electrons.

Protons and neutrons are called the nucleons of an atoms. They are massive particles found in the nucleus of an atom. The nucleus is a very small area but very dense.

Electrons are negatively charged subatomic particles. The bulk of the volume of the atom is occupied by electrons orbiting the nucleus.

Together, the electrons and the nucleons makes up the subatomic particles in an atom.

Answer:

The hydroxide ion concentration is 0.003981 M.

The hydronium ion concentration is[tex] 2.5119\times 10^{-12} M[/tex].

Explanation:

The pOH of an aqueous solution at 25°C =  2.40

[tex]pOH=-\log[OH^-][/tex]

[tex]2.40=-\log[OH^-][/tex]

[tex][OH^-]=0.003981 M[/tex]

The hydroxide ion concentration is 0.003981 M.

The pH of an aqueous solution at 25°C =  ?

The relationship between pH and pOH :

pH + pOH = 14

[tex]pH=14- pOh = 14-2.40 =11.6 [/tex]

[tex]pH=-\log[H_3O^+][/tex]

[tex]11.6=-\log[H_3O^+][/tex]

[tex][H_3O+]=2.5119\times 10^{-12} M[/tex]

The hydronium ion concentration is[tex] 2.5119\times 10^{-12} M[/tex].

Answer: The volume of 2.0 M solution of glucose required is 11.3 mL

Explanation:

To calculate the volume of concentrated solution, we use the equation:

[tex]M_1V_1=M_2V_2[/tex]

where,

[tex]M_1\text{ and }V_1[/tex] are the molarity and volume of the concentrated solution

[tex]M_2\text{ and }V_2[/tex] are the molarity and volume of diluted solution

We are given:

Conversion factor: 1 L = 1000 mL

[tex]M_1=2.0M\\V_1=?mL\\M_2=0.15M\\V_2=0.15L=150mL[/tex]

Putting values in above equation, we get:

[tex]2.0\times V_1=0.15\times 150\\\\V_1=11.3mL[/tex]

Hence, the volume of 2.0 M solution of glucose required is 11.3 mL

Answer: The correct answer is Option A.

Explanation:

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]      .....(1)

Given mass of carbon dioxide = 200 g

Molar mass of carbon dioxide = 44 g/mol

Putting values in equation 1, we get:

[tex]\text{Moles of carbon dioxide}=\frac{200g}{44g/mol}=4.54mol[/tex]

The given chemical equation of photosynthesis reaction follows:

[tex]6CO_2+6H_2O\rightarrow C_6H_{12}O_6+6O_2[/tex]

By Stoichiometry of the reaction:

If 6 moles of carbon dioxide produces 1 mole of glucose.

Then, 4.54 moles of carbon dioxide will produce = [tex]\frac{1}{6}\times 4.54=0.756mol[/tex]

Now, calculating the mass of glucose from equation 1, we get:

Molar mass of glucose = 180.2 g/mol

Moles of glucose = 0.756 moles

Putting values in equation 1, we get:

[tex]0.756mol=\frac{\text{Mass of glucose}}{180.2g/mol}\\\\\text{Mass of glucose}=136.48g[/tex]

Hence, the correct answer is Option A.

Explanation:

Boiling point is defined as the point at which liquid state and vapor state of a substance are existing in equilibrium.

Equilibrium is defined as the state in which rate of forward and rate of backward reaction are equal to each other.

For example, [tex]Br(l) \rightleftharpoons Br(g)[/tex]

So, when we boil bromine which is present in liquid state then at the boiling point its vapors will exist in equilibrium. And unless all the liquid state of bromine will not convert into vapors its temperature will not change.

Therefore, we can conclude that at boiling point the liquid and the vapur of Bromine are in equilibrium.

Answer:

[tex]K_{f}[/tex] for solvent is [tex]17^{0}\textrm{C}.kg.mol^{-1}[/tex]

Explanation:

[tex]\Delta T_{f}=K_{f}.m[/tex], where [tex]\Delta T_{f}[/tex] is depression in freezing point and m is molality of solution

Molality of solution (m) = (moles of solute/mass of solvent in kg)

                                      = [tex]\frac{\frac{0.980}{178.2}}{0.01387}mol/kg[/tex]

                                      = 0.396 mol/kg

[tex]\Delta T_{f}=(12.0-5.1)^{0}\textrm{C}=6.9^{0}\textrm{C}[/tex]

So, [tex]K_{f}=\frac{\Delta T_{f}}{m}=\frac{6.9}{0.396}^{0}\textrm{C}.kg.mol^{-1}=17^{0}\textrm{C}.kg.mol^{-1}[/tex]

Answer:

make thermometers smaller using mercury

Explanation:

Daniel Fahrenheit invented first accurate thermometer which used mercury instead of the alcohol and the water mixtures. In laboratory, he used this invention of him to develop first temperature scale which was enough precise to become the worldwide standard.

The key to the Fahrenheit's thermometer was that the mercury is able to rise and fall within tube without sticking to sides. It was ideal substance for the reading temperatures since mercury expanded at more constant rate than the alcohol and is also able to be read the temperature at much higher and also lower temperatures.

Answer:

A)Boiling point constant of benzene = 2.63°C/m

B) 242.77 g/mol is the molar mass of the solute.

Explanation:

[tex]\Delta T_b=T_b-T[/tex]

[tex]\Delta T_b=K_b\times m[/tex]

[tex]Delta T_b=iK_b\times \frac{\text{Mass of solute}}{\text{Molar mass of solute}\times \text{Mass of solvent in Kg}}[/tex]

where,

[tex]\Delta T_f[/tex] =Elevation in boiling point

[tex]K_b[/tex] = boiling point constant od solvent= 3.63 °C/m

1 - van't Hoff factor

m = molality

A) Mas of solvent = 500 g = 0.500 kg

T = 80.1°C ,[tex]T_b[/tex] =82.73°C

[tex]\Delta T_b=T_b-T[/tex]

[tex]\Delta T_b[/tex]= 82.73°C - 80.1°C = 2.63°C

[tex]2.63^oC=K_b\times \frac{36 g}{72 g/mol\times 0.500 kg}[/tex]

[tex]K_b=\frac{2.63^oC\times 72 g/mol\times 0.500 kg}{36 g}=2.63 ^oC/m[/tex]

Boiling point constant of benzene = 2.63°C/m

B) Mass of solute = 1.2 g

Molar mas of solute = M

Mass of solvent = 50 g= 0.050 kg

i = 1

T = 80.1°C ,[tex]T_b[/tex] =80.36°C

[tex]\Delta T_b=T_b-T[/tex]=80.36°C -  80.1°C = 0.26°C

[tex]0.26^oC=1\times K_b\times \frac{1.2 g}{M\times 0.050 kg}[/tex]

[tex]M=1\times 2.63^oC/m\times \frac{1.2 g}{0.26^oC\times 0.050 kg}[/tex]

M = 242.77 g/mol

242.77 g/mol is the molar mass of the solute.

Final answer:

The boiling point constant (Kb) of benzene was found to be 2.63°C/m using the data from part A. Using this constant and the boiling point elevation data in part B, the molar mass of the unknown solute was calculated to be 240 g/mol.

Explanation:

The subject of this question is Chemistry, focusing specifically on the boiling point elevation of solutions and the calculation of molar mass from boiling point data. The problem pertains to colligative properties of solutions, which are properties that depend on the number of particles in a solution but not their identity.

Part A: Calculating Boiling Point Elevation

To find the boiling point constant (Kb) of benzene, we use the formula for boiling point elevation, ΔTb = Kb × m, where ΔTb is the change in boiling point and m is the molality of the solution. Given that the boiling point of benzene increases from 80.1°C to 82.73°C, the elevation in boiling point is 2.63°C. Molality (m) is calculated by the number of moles of pentane divided by the mass of benzene in kilograms. The molar mass of pentane (C5H12) is 72.15 g/mol, and so 36 g corresponds to 0.5 moles. The mass of benzene is 500 g, which is 0.5 kg. Thus, m = 0.5 moles / 0.5 kg = 1 mol/kg. Using these values, we can calculate Kb: 2.63°C = Kb × 1 mol/kg, so Kb = 2.63°C/m.

Part B: Determining Molar Mass of an Unknown Solute

For part B, to find the molar mass of the solute, we first calculate the change in boiling point of benzene, which is 80.36°C - 80.1°C = 0.26°C. With the boiling point constant of benzene from Part A (Kb = 2.63°C/m), and assuming i (the van 't Hoff factor) is 1 for a non-electrolyte, we establish the molality of the solution as m = ΔTb / Kb = 0.26°C / 2.63°C/m = 0.1 mol/kg. Knowing the molality and the mass of solvent (benzene), we can now calculate the molar mass (M) of the unknown solute using the formula M = mass of solute / (molality × mass of solvent in kg). With the mass of solute as 1.2 g and the mass of solvent as 0.05 kg, M = 1.2 g / (0.1 mol/kg × 0.05 kg)= 240 g/mol.

Answer:

On the basis of ownership, distribution, durabilities.

Explanation:

Answer:

36 micrograms of [tex]Cu^{2+}[/tex] ion  are therein one spot.

Explanation:

Amount of copper(II) ions in 1 liter solution = 6 g

Volume of solution used in spotting = 6μL = [tex]6\times 10^{-6} L[/tex]

[tex]1 \mu L = 10^{-6} L[/tex]

Amount of copper (II) ion in [tex]6\times 10^{-6} L[/tex]:

[tex]6\times 6\times 10^{-6} L=3.6\times 10^{-5} g[/tex]

[tex]1 g = 10^{6} \mu g[/tex]

[tex]3.6\times 10^{-5} g=3.6\times 10^{-5}\times 10^{6} \mu g=36 \mu g[/tex]

36 micrograms of [tex]Cu^{2+}[/tex] ion  are therein one spot.

Answer:

D. The particles move up and down without changing their position

Explanation:

These are gases. They are typically known for their randomness and no fixed arrangement of their atoms.

Gases generally assume the volumes of the containers they fill. They spread easily and readily to fill the volume where they occupy. Also, gases are readily compressible as they lack intermolecular attraction between their molecules.

Answer: Option (A) is the correct answer.

Explanation:

In a solid substance, the atoms are held together by strong intermolecular forces of attraction. Hence, the atoms are not able t move freely but they are able to vibrate at their mean position.

As a result, solids have a definite shape and volume and also, they are incompressible in nature.

In liquids, the atoms are held together by less strong intermolecular forces of attraction as compared to solids. Therefore, atoms of a liquid are able to slide past each other. So, they are partially compressible in nature.

Also, liquids acquire the shape of container in which they are placed.

But in gases, the molecules are held together by weak intermolecular forces of attraction. Hence, atoms are able to move far away from each other as they have high kinetic energy.

Gases are highly compressible in nature.

Therefore, in the given situation as substance took different shapes in each container.

Thus, we can conclude that it is partially compressible could be another characteristic of the substance.

Explanation:

White precipitate of silver chloride get dissolves in excess ammonia to formation of complex between silver ions, chloride ions and ammonia molecules.

The chemical reaction is given as:

[tex]AgCl(s)+2NH_3(aq)\rightarrow Ag[(NH_3)_2]^+Cl^-(aq)[/tex]

When 1 mole of silver chloride is added to 2 mole of an aqueous ammonia it form coordination complex of diaaminesilver(I) chloride.

Final answer:

The chemical equation for the dissolution of AgCl precipitate with the addition of ammonia is [tex]AgCl(s) + 2NH_3(aq) < = > Ag(NH_3)_2+(aq) + Cl-(aq).[/tex] Ammonia interacts with [tex]Ag^+[/tex] to form a complex ion, increasing the solubility of AgCl significantly.

Explanation:

The dissolution of AgCl precipitate upon the addition of NH3(aq) is described by the following chemical equation:

[tex]AgCl(s) + 2NH_3(aq) \ < = > Ag(NH_3)_2+(aq) + Cl−(aq)[/tex]

When ammonia (NH3) is added to a solution containing AgCl, it reacts with the [tex]Ag^+[/tex] ions to form the complex ion [tex]Ag(NH_3)_2^+[/tex]. This acts to decrease the concentration of [tex]Ag^+[/tex] ions in solution. According to Le Chatelier's principle, the solubility of AgCl will increase to re-establish equilibrium, which leads to the dissolution of the AgCl precipitate.

The net effect of adding ammonia is a significant increase in the solubility of AgCl, as indicated by a change in the equilibrium constant from 1.8 x [tex]10^-10[/tex] in pure water to 3.0 x [tex]10^3[/tex] in the presence of dissolved ammonia.

The kinetic energy acquired by the electron in a hydrogen atom when it absorbs a light radiation can be calculated using E = hf, where E is the energy of the radiation and f is the frequency of the radiation.

When an electron in a hydrogen atom absorbs a light radiation, it gains kinetic energy. To calculate the energy gained, we can use the equation E = hf, where E is the energy of the radiation, h is Planck's constant (6.626 x 10^-34 J·s), and f is the frequency of the radiation. In this case, the energy of the radiation is given as 1.08 x 10^-7 J.

Since the electron absorbs the radiation, we know that the energy gained will be equal to the energy of the radiation. Therefore, the kinetic energy acquired by the electron in the hydrogen atom is 1.08 x 10^-7 J.

Answer:

Lithium iodide, sodium fluoride and potassium iodide are more likely to undergo dissolution in water.

Explanation:

Water is a polar substance, which means that it will be a good solvent for other polar substances and salts.

LiI, NaF and KI are all salts that easily dissociate in water to produce ions. The ions will be surrounded by water molecules (solvatation) due to electrostatic interactions.

Heptane and octane are both non-polar substances that have no significant charges to interact with water molecules. Therefore, this substances will not dissolve in water.

Final answer:

Lithium iodide, sodium fluoride, and potassium iodide are ionic compounds that are most likely to dissolve in water, a polar solvent. Nonpolar substances like heptane and octane are less likely to dissolve in water.

Explanation:

When considering the solubility of substances in water, we must account for the polarity of both the solute and the solvent. Water is a polar solvent, which means it can easily dissolve other polar compounds and ionic compounds due to its ability to form ion-dipole interactions. Considering the substances provided, lithium iodide (LiI), sodium fluoride (NaF), and potassium iodide (KI) are ionic compounds and are most likely to undergo dissolution in water.

On the other hand, heptane ([tex]C_{7} H_{16}[/tex]) and octane ([tex]C_{8} H_{18}[/tex]) are hydrocarbons, which are nonpolar substances. Nonpolar substances do not dissolve well in polar solvents like water, thus making these substances less likely to dissolve in water. Instead, they would be more soluble in nonpolar solvents such as hexane or other hydrocarbons.

To obtain 50.0 g of methyl acetate, the student should measure out 53.5 cm³, using the density of methyl acetate which is 0.934 g/cm³.

To calculate the volume of methyl acetate the student should pour out using its density, the formula density = mass/volume can be rearranged to volume = mass/density. Given that the density of methyl acetate is 0.934 g/cm³, and the student needs 50.0 g of methyl acetate, the volume can be calculated as follows:

volume = mass/density

volume = 50.0 g / 0.934 g/cm³

volume = 53.533 g/cm³

The student should measure out 53.5 cm³ of methyl acetate to obtain 50.0 g, rounding to 3 significant digits.

Answer: The given number in scientific notation is [tex]2.511\times 10^{-2}[/tex]

Explanation:

Scientific notation is defined as the notation in which a number is expressed in the decimal form. This means that the number is always written in the power of 10 form. The numerical digit lies between 0.1.... to 9.9.....

If the decimal is shifting to right side, the power of 10 is negative and if the decimal is shifting to left side, the power of 10 is positive.

We are given:

A number having value = 0.0251089

Converting this into scientific notation, we get:

[tex]\Rightarrow 0.0251089=2.511\times 10^{-2}[/tex]

Hence, the given number in scientific notation is [tex]2.511\times 10^{-2}[/tex]

Answer:

Part 1

(a) 0.0113

(b) 11300 ppm

(c) 1.82 *10⁻³

(d) 0.100 M

(e) 0.101 m

Part 2

(a) 9.45 *10⁻³

(b) mole fraction = 2.45 *10⁻³

(c) 11.3 ppm

Explanation:

Chlorobenzene formula is C₆H₅Cl

Part 1: We are given a concentration of chlorobenzene in water of 100 mol/m³, and a density of the solution of 1.00 g/cm³.

(a) weight fraction C₆H₅Cl = mass C₆H₅Cl / mass solution

We know there are 100 moles of C₆H₅Cl per m³ of solution.

To get the mass of C₆H₅Cl we'll convert the moles to mass by using the molar mass:

Molar mass C₆H₅Cl = 6*12.011 + 5*1.00794 + 35.4527 = 112.558 g/mol

mass C₆H₅Cl = moles C₆H₅Cl * molar mass C₆H₅Cl

mass C₆H₅Cl = 100 moles * 112.558 g/mol = 11255.8 g

11255.8 g of C₆H₅Cl are in 1 m³ of solution.

Next we'll convert 1 m³ of solution to mass by using the density

mass solution = volume solution * density of solution

[tex]mass solution = 1m^{3} *\frac{(100cm)^{3} }{ 1m^{3}} * \frac{1.00 g}{cm^{3} } = 1.00 *10^{6} g[/tex]

weight fraction C₆H₅Cl = 11256 g / 1.00 *10⁶ g = 0.0113

(b) ppm stands for "parts per million" and it is usually expressed as mg per Liter of solution

We already calculated that there are 11256 g or more exactly 11300 g of C₆H₅Cl in 1 m³ of solution, so lets convert to mg/L:

[tex]\frac{11300 g}{1 m^{3} } * \frac{1000 mg}{1 g} * \frac{1 m^{3} }{1000 L} = 11300 mg/L[/tex]

So the solution is 11300 ppm

(c)  mole fraction = moles of C₆H₅Cl / total moles in solution

total moles = moles C₆H₅Cl + moles water

moles water = mass water / molar mass water

mass water = mass solution - mass C₆H₅Cl

moles of C₆H₅Cl = 100 moles

mass water = 1.00 *10⁶ g of solution - 11256 g = 988744 g of water

moles water = 988744 g / 18.0153 g/mol = 54884 moles water

total moles = 100 + 54884 = 54984 moles

mole fraction = 100 moles of C₆H₅Cl / 54984 moles = 1.82 *10⁻³

(d) Molarity = moles C₆H₅Cl / Liters of solution

We know the solution is 100 mol / m³ so we just have to convert the m³ to L:

[tex]\frac{100 mol}{m^{3} } * \frac{1 m^{3}}{1000 L} = 0.100 mol / L = 0.100 M[/tex]

(e) Molality = moles C₆H₅Cl / kg water

We know that there are 100 moles per 988744 g of water, so we need to convert the grams of water to kilograms.

[tex]Molality = \frac{100 moles}{988744 g} *\frac{1000 g}{1 kg} = 0.101 m[/tex]

____________________________________

Part 2: Concentration of C₆H₅Cl in air is 0.100 mol/m³, at 25 °C and 1 atm.

Molar mass air = 28.84 g/mol

(a) weight fraction C₆H₅Cl = mass C₆H₅Cl / total mass

mass C₆H₅Cl = 0.100 mol * 112.558 g/mol = 11.26 g

total mass = mass C₆H₅Cl + mass air

mass air = moles air * molar mass air

moles air = total moles - moles C₆H₅Cl

We can calculate the total moles by using the ideal gas law:

P V = n R T

where P is pressure in atm, V is volume in L, n is the number of moles, R is the gas constant and T is temperature in Kelvin.

n = P V / R T

P = 1 atm

V = 1 m³ = 1000 L

R = 0.08206 L atm K⁻¹ mol⁻¹

T = 25 + 273.15 = 298 K

n = (1 atm * 1000 L) / (0.08206 L atm K⁻¹ mol⁻¹ * 298 K) = 40.89 moles

moles air = 40.89 - 0.100 = 40.79 moles air

mass air = 40.79 mol * 28.84 g/mol = 1176.4 g

total mass = 1176.4 g + 11.26 g = 1188 g

weight fraction = 11.26 g / 1188 g = 9.45 *10⁻³

(b) mole fraction = moles C₆H₅Cl / total moles

mole fraction = 0.100 / 40.89 = 2.45 *10⁻³

(c) ppm = mg C₆H₅Cl / Liters

We already know there are 11.26 g C₆H₅Cl in 1 m³, which is the same as 1000 L, so:

[tex]\frac{11.26 g}{1000 L} *\frac{1000 mg}{1 g} = 11.3 mg/L[/tex]

The concentration is 11.3 ppm

Final answer:

a) The weight fraction of chlorobenzene is 11.26. b) The chlorobenzene concentration in ppm is 100,000 ppm. c) The mole fraction of chlorobenzene is 0.1. d) The molarity of chlorobenzene is 0.1 M. e) The molality of chlorobenzene is 0.1 m.

Explanation:

a) The weight fraction of chlorobenzene can be calculated by dividing the mass of chlorobenzene by the total mass of the solution. Since the density of the solution is 1.00 g/cm3, the mass of chlorobenzene can be calculated as 100 mol/m3 * 112.6 g/mol / 1000 cm3 = 11.26 g/cm3. Therefore, the weight fraction of chlorobenzene is 11.26 g/cm3 / (1.00 g/cm3) = 11.26.

b) To convert the concentration of chlorobenzene from mol/m3 to ppm (parts per million), we need to multiply by 10^6. Therefore, the chlorobenzene concentration in ppm is 100 mol/m3 * 10^6 ppm/mol = 100,000 ppm.

c) The mole fraction of chlorobenzene can be calculated by dividing the number of moles of chlorobenzene by the total number of moles in the solution. Since the concentration of chlorobenzene is given in mol/m3, the number of moles of chlorobenzene can be calculated as 100 mol/m3 * (1 L / 1000 cm3) = 0.1 mol. The total number of moles in the solution is 1 L * (1 mol/m3) = 1 mol. Therefore, the mole fraction of chlorobenzene is 0.1 mol / 1 mol = 0.1.

d) The molarity of chlorobenzene can be calculated by dividing the number of moles of chlorobenzene by the volume of the solution in liters. Since the concentration of chlorobenzene is given in mol/m3, the number of moles of chlorobenzene can be calculated as 100 mol/m3 * (1 L / 1000 cm3) = 0.1 mol. The volume of the solution is 1 L. Therefore, the molarity of chlorobenzene is 0.1 mol / 1 L = 0.1 M.

e) The molality of chlorobenzene can be calculated by dividing the number of moles of chlorobenzene by the mass of the solvent in kilograms. Since the density of the solution is 1.00 g/cm3, the mass of the solvent (water) can be calculated as 1 L * (1000 cm3 / 1 L) * (1.00 g/cm3) = 1000 g. The number of moles of chlorobenzene can be calculated as 100 mol/m3 * (1 L / 1000 cm3) = 0.1 mol. Therefore, the molality of chlorobenzene is 0.1 mol / 1 kg = 0.1 m.

Answer:

The rate is [tex] 4,5 \times 10^{-5}\frac{mole}{Ls}[/tex]

Explanation:

Stoichiometry

[tex]CH_{3}Cl+NaOH \rightarrow CH_{3}OH+NaCl [/tex]

Kinetics

[tex]-r_{A}=k \times [CH_{3}Cl] \times [NaOH] [/tex]

The rate constant K can be calculated by replacing with the initial data

[tex] 1 \times 10^{-4}\frac{mole}{Ls}=k \times [0,2M] \times [1,0M]  =5 \times 10^{-4}\frac{L}{mole s}[/tex]

Taking as a base of calculus 1L, when half of the [tex] CH_{3}Cl [/tex] is consumed the mixture is composed by

[tex] 0,1 mole CH_{3}Cl [/tex] (half is consumed)

[tex] 0,9 mole NaOH [/tex] (by stoicheometry)

[tex] 0,1 mole CH_{3}OH [/tex]  

[tex] 0,1 mole NaCl [/tex]

Then, the rate is

[tex]-r_{A}=5 \times 10^{-4} \frac{L}{mole s}\times 0,1M \times 0,9 M=4,5 \times 10^{-5}\frac{mole}{Ls}[/tex]

The reaction rate decreases because there’s a smaller concentration of reactives.

Answer:

a)CN=12

b)APF=74 %

c)a=0.35 nm

d)ρ=9090.9 [tex]Kg/m^3[/tex]

Explanation:

Given that

Nickel have FCC structure

We know that in FCC structure ,in FCC 8 atoms at corner with 1/8 th part in one unit cell and 6 atoms at faces with 1/2 part in one unit cell .

Z=8 x 1/8 + 1/2 x 6 =4

Z=4

Coordination number (CN)

 The number of atoms which touch the second atoms is known as coordination number.In other word the number of nearest atoms.

CN=12

Coordination number of FCC structure is 12.These 12 atoms are 4 atoms at the at corner ,4 atoms at 4 faces and 4 atoms of next unit cell.

APF

[tex]APF=\dfrac{Z\times \dfrac{4}{3}\pi R^3}{a^3}[/tex]

We know that for FCC

[tex]4R=\sqrt{2}\ a[/tex]

Now by putting the values

[tex]APF=\dfrac{4\times \dfrac{4}{3}\pi R^3}{\left(\dfrac{4R}{\sqrt2}\right)^3}[/tex]

APF=0.74

APF=74 %

[tex]4R=\sqrt{2}\ a[/tex]

[tex]4\times 0.124=\sqrt{2}\ a[/tex]

a=0.35 nm

Density

[tex]\rho=\dfrac{Z\times M}{N_A\times a^3}[/tex]

We know that M for Ni

M=58.69 g/mol

a=0.35 nm

[tex]N_A=6.023\times 10^{23}\ atom/mol[/tex]

[tex]\rho=\dfrac{Z\times M}{N_A\times a^3}[/tex]

[tex]\rho=\dfrac{4\times 58.69}{6.023\times 10^{23}\times( 0.35\times 10^{-9})^3}\ g/m^3[/tex]

ρ=9090.9 [tex]Kg/m^3[/tex]

Answer:

3-D shape of molecule and adjacent carbon atoms and their orientation.

Explanation:

Stereochemistry involves study of relative spatial positioning or arrangement of atoms which form structure of the molecules.

Stereochemistry studies focuses on the stereoisomers, which are the species which have same molecular formula but the sequence of the bonded atoms is different in the 3-D space of the atoms.

Thus,

Molecule's stereochemistry tells the 3-D shape of molecule and adjacent carbon atoms and their orientation.

Stereochemistry provides information about the three-dimensional structure of a molecule, including the arrangement of atoms and their spatial orientation.

Stereochemistry is the study of the relative arrangement of atoms in molecules and their manipulation. It provides information about the three-dimensional structure of a molecule, including the arrangement of atoms and the spatial orientation of these atoms. By showing a molecule's stereochemistry, we can understand its shape, bonding patterns, and how it interacts with other molecules.

A molecule's stereochemistry can be represented using various models, such as ball-and-stick models, wedge-and-dash representations, or space-filling models. These models help visualize the three-dimensional structure of a molecule and show the arrangement of atoms in space.

Answer:

hypochlorite   -1  others -2

Explanation:

Hypochlorite, polyatomic ion has the lowest charge when compared with other given options.

Answer: hypochlorite

Explanation:

Ions that possess more than single atom is always referred as polyatomic or molecular ions. It is the charged chemical compound consisting more than one covalently bonded atoms or metal complex that can be taken as the single unit.

[tex]\text { Hypochlorite is } C l O^{-1}[/tex] is the charge for Hypochlorite and it is the polyatomic ion with the lowest charge.

                  [tex]\text { Hypochlorite is } C l O^{-1}[/tex]

                  [tex]\text { carbonate is } C O_{3}^{-2}[/tex]

                  [tex]\text { sulfite is } S O_{3}^{-2}[/tex]

Answer:

pH = 2.56

Explanation:

The Henderson-Hasselbalch equation relates the pH to the Ka and ratio of the conjugate acid-base pair as follows:

pH = pKa + log([A⁻]/[HA]) = -log(Ka) + log([A⁻]/[HA])

Substituting in the value gives:

pH = -log(1.77 x 10⁻⁴) + log((0.0065M) / (0.10M))

pH = 2.56

The pH of a 0.10 M formic acid and 0.0065 M formate solution can be calculated using the Henderson-Hasselbalch equation and a given Ka for formic acid of 1.77 x 10-4. The resulting pH is approximately 3.04.

In order to find the pH of a solution consisting of a weak acid (formic acid, HCOOH) and its conjugate base (formate, HCOO-), you'd use the Henderson-Hasselbalch equation, which is pH = pKa + log([A-]/[HA]), where [A-] is the molarity of the conjugate base (here, formate, 0.0065 M) and [HA] is the molarity of the weak acid (here, formic acid, 0.10 M). The pKa is found by taking the negative logarithm of the Ka value, so pKa = -log(Ka) = -log(1.77 x 10-4) = 3.75.

Using these values in the Henderson-Hasselbalch equation: pH = 3.75 + log(0.0065/0.10) this results in a pH of approximately 3.04

https://brainly.com/question/34432529

#SPJ6

Answer:

If you want to calculate the number of moles of any compund, you should look for the molar mass. For LiF, its molar mass is 25,9 g/m So if 25,9 g are in one mol, the 317 in how many?. Then 12,2 is the number of moles of lithium fluoride produced.

Explanation:

To get the molar mass of a compound, you should know the mass at the Periodic Table, for Li 7,00 , for F 18,9

Answer:

[tex]\boxed{\text{12.2 mol}}[/tex]

Explanation:

[tex]\text{M$_{r} $ of LiF} = 6.94 + 19.00 = 25.94\\\text{Moles} = \text{317 g } \times \dfrac{\text{1 mol}}{\text{25.94 g}} = \text{12.2 mol}\\\\\text{The sample contains $\boxed{\textbf{12.2 mol}}$ of LiF}[/tex]

Answer:

Pyruvic acid: conjugate base

Lactic acid: conjugate base

Explanation:

The ratio of conjugate base to conjugate acid can be found using the Henderson-Hasselbalch equation when the pH and pKa are known.

pH = pKa + log([A⁻]/[HA])

The equation can be rearranged to solve for the ratio:

pH - pKa = log([A⁻]/[HA])

[A⁻]/[HA] = 10^(pH-pKa)

Now we can calculate the ratio for the pyruvic acid:

[A⁻]/[HA] = 10^(pH-pKa) = 10^(7.4 - 2.50) = 79433

[A⁻] = 79433[HA]

There is a much higher concentration of the conjugate base.

Similarly for lactic acid:

[A⁻]/[HA] = 10^(pH-pKa) = 10^(7.4 - 3.86) = 3467

[A⁻] = 3467[HA]

For lactic acid the conjugate base also dominates at pH 7.4

Explanation:

At low temperatures (below the glass transition temperature) crystalline polymers are rigid like glass. This happens because all the polymer chains are perfectly arranged, all the polymer is in the crystalline form. On the other hand, when the temperature raises, upper the glass transition temperature, some polymer chains start to get loose and form some amorphous regions in between the crystalline regions of the polymer. This condition makes the polymer more flexible.

Answer:

Recrystallization refers to the method used for purifying chemical compounds. In this method, the chemical compound along with the impurities is dissolved in an appropriate hot solvent, to separate the chemical compound and the impurity.

The pure chemical compound that separates after the recrystallization process exists in the form of crystals.

Generally, the impure chemical compound is fully dissolved in the minimum amount of the solvent, thus forming a saturated solution. This is because if large amount of solvent is used, then a large amount of the chemical compound will remain dissolved in the solvent, even after cooling.

Therefore, all of the chemical compound will not get recrystallized.

Answer:

0.400 mL

Explanation:

Hello, the dilution factor (in folds) is given by:

[tex]folds=\frac{total_{volume}}{sample_{volume}}[/tex]

Thus, the sample volume with three significant figures is given by:

[tex]sample_{volume}=\frac{2mL}{5"folds"}=0.400 mL[/tex]

Best regards.