C program to check if two strings are different by one and only one character
#include<stdio.h>
#include<string.h>
//driver function
int main()
{
int result;
char f_string[100],s_string[100]; /* Declaring f_string and s_string as strings*/
printf("Enter the first string : \n"); // Taking inputs from user
scanf("%s",f_string);
printf("Enter the second string : \n"); //
scanf("%s",s_string);
int l1 = strlen(f_string); // calculating length of strings
int l2 = strlen(s_string);
int difference = 0; // For storing the count difference in strings
if(l1==l2) // Checking lengths of string
{
for(int i=0;i<l2;i++)
{
if(f_string[i] !=s_string[i]) /*checking each character of f_string with the same character index of s_string*/
difference++; // updating the count difference
}
}
result=difference;
if(result==1) // if there is only one character difference
printf("The two strings are replaced by one character");
else
printf("The two strings are not replaced by one character");
}
Output
Enter the first string : lake
Enter the second string : bake
The two strings are replaced by one character
Enter the first string : pal
Enter the second string : pale
The two strings are not replaced by one character
Enter the first string : bus
Enter the second string : bit
The two strings are not replaced by one character
Enter the first string : kite
Enter the second string : bit
The two strings are not replaced by one character
Write each of the following decimal values in binary. (Can please show me how you did arithmetic you to perform the conversion.)
47
14
81
102
241
Answer:
47 → 101111
14 → 1110
81 → 1010001
102 → 1100110
241 → 11110001
Explanation:
There are two ways to calculate binary equivalent of decimal values:
Divide the number by 2 as in the image, keep the reminder to right. then divide the divisor by 2 and keep the reminder to right and so on. Then read the reminders from top to bottom.Or you can start putting 1 at the nearest power of 2 that is smaller than decimal integer, then subtract that value from the decimal integer. Again put 1 at nearest power of 2 and so on.e.g.
For 102, we put 1 at 64. than 102[tex]-[/tex]64 = 38
then put 1 at 32, now 38 [tex]-[/tex] 32 = 6.
then put 1 at 4, now 6 [tex]-[/tex] 4 = 2.
then put 1 at 2, now 2[tex]-[/tex]2 = 0.
so put 0 at 1 and all other places except those where we put 1.
If a CPU receives theinstruction to multiply the byte-sized values $12 and $3E, thisaction will take place in the ______________ (part of internal CPUhardware) section of the CPU.
Answer: Arithmetic and logic unit(ALU)
Explanation: In central processing unit (CPU) , there are two main units CU(control unit) and ALU (arithmetic and logic unit) . ALU is responsible for any sort arithmetic and logical operation in the processor.This unit can perform mathematical operation like addition , multiplication divide , logical and many more. So the given operation of multiplication in the question will be done bu ALU of the CPU.
Under Rule 504 ofRegulation D, a company can sell up to ______ of securitiesin
any 12-monthperiod.
a. $50,000
b. $100,000
c. $500,000
d. $1,000,000
Answer:
5,000,000 (5 million) of securities in any 12-month period.
Explanation:
Based on my extensive research on regulations. Rule 504 of Regulation D provides an exemption for having to register under the federal securities laws. This is usually for companies that are in business with products or services that are considered as securities or commodities. This Rule allows a company to sell up to 5,000,000 of securities in any 12-month period.
This answer is not part of the list of available answers but it is correct. Those answers may be outdated.
I hope this answered your question. If you have any more questions feel free to ask away at Brainly.
What is stand-alone LDAP server?
Answer:
A stand-alone LDAP server is defined as to remove the load from a server that does multi function tasks. It is more efficient when we use one or more LDAP configurations .
Light weight Directory Access Protocol (LDAP) is a client and server protocol used for accessing directory data. It helps in reading and editing the directories over IP networks and runs directly over Transmission control protocol and internet protocol used simple string format for transferring of data.
What applications work best with multiplexing?Why?
Answer:
Multiplexing is the process of combining multiple analog and digital signal into one signal over a shared medium and it is most efficient service, which is provided by the transport layer protocol. The main purpose of multiplexing is that signal are transmitted efficiently.
It contains applications as:
Client-server Application
Many to single client-server application
Many to many client-server application
Many client to many server application is the best because it is improving server application and processing a client request within a group on any server.
True / False
The architecture of a computer determines its machine language.
Answer: True
Explanation:
The architecture of the computer determine the processor and it determines whether we will have fixed length instructions or variable length instructions.
We have CISC and RISC architectures which uses different types of instructions and the data are processes in different machine languages.
Data mining must usestatistics to analyze data.
True
False
Answer: True
Explanation: In data mining, they use statistics component for the analyzing of the large amount of data and helps to deal with it. Statistics provide the techniques for the analyzing, evaluating and dealing with the data that is known as data mining.Data statistics provide the help to organize large data in a proper form and then analyze it. Thus, the statement given is true that data mining must use statistics to analyse data.
In ________ for final fields and methods the value is assignedlater but in ______ you assign the value during declaration.
Java , C++
C++ , C#
Java , C#
C++ ,Java
Answer:
The answer to this question is Java,C++.
Explanation:
We can assign non static final variables a value with the declaration or in the constructor but this is not the case with c++ because we have to assign value during declaration and c++ equivalent of final is const keyword and there is sealed or readonly keywords in c# not final.If we do not assign value at the time of declaration the const variable will contain garbage value which cannot be changed afterwards.
Answer:
The answer to this question is Java,C++.
Explanation:
We can assign non static final variables a value with the declaration or in the constructor but this is not the case with c++ because we have to assign value during declaration and c++ equivalent of final is const keyword and there is sealed or readonly keywords in c# not final.If we do not assign value at the time of declaration the const variable will contain garbage value which cannot be changed afterwards.
This loop is a good choice when you know how many times you want the loop to iterate in advance of entering the loop.
1. do-while
2. while
3. for
4. infinite
5. None of these
Answer:
This loop is a good choice when you know how many times you want the loop to iterate in advance of entering the loop.: for - 3.
Class objects cannot be passed as parameters to functions or returned as function values.
True
False
Final answer:
The statement is false; class objects can indeed be passed as parameters to functions and returned as function values in many object-oriented programming languages.
Explanation:
The statement that class objects cannot be passed as parameters to functions or returned as function values is false. In many programming languages, especially those that support Object-Oriented Programming (OOP), it is common to pass objects as arguments to functions or methods, and also to return them as function values. This is part of the encapsulation feature in OOP, where an object bundles data and methods that operate on that data, allowing the methods direct access to the object's data without necessarily passing them as individual parameters.
For example, consider a Python class named Book. You can create an instance of this class and pass it to a function:
def display_book_info(book):
print(book.title)
print(book.author)
my_book = Book("Pride and Prejudice", "Jane Austen")
display_book_info(my_book)
In this case, my_book, which is an object of the class Book, is being passed as a parameter to the function display_book_info.
In a ____ queue, customers or jobs with higher priorities are pushed to the front of the queue.
A.
structured
B.
divided
C.
priority
Answer: In a priority queue, customers or jobs with higher priorities are pushed to the front of the queue.
Explanation:
A queue is an abstract data type which is an ordered set of elements. The elements are served in the order in which they join the queue. The first element which was put in the queue is processed first.
The operations performed on queue data type are dequeue and enqueue.
Dequeue refers to removal of the first element from the queue after it has been serviced.
Enqueue refers to the arrival of new element when the element is added at the end of the queue.
A priority queue is another implementation of a queue. All the elements in a priority queue are assigned a priority. The element with the higher priority is served before the element with a lower priority. In situations of elements having same priority, the element is served based on the order in which the element joined the queue.
In programming, a priority queue can be implemented using heaps or an unordered array. Unordered array is used based on the mandatory operations which are performed on the priority queue.
The mandatory operations supported by a priority queue are is_empty, insert_with_priority and pull_highest_priority_element. These operations are implemented as functions in programming.
The is_empty confirms if the queue is empty and has no elements.
The insert_with_priority puts the new element at the appropriate position in the queue based on its priority. If the priority of the element is similar to the priority of other element, the position of the new element is decided based on the order of joining the queue.
The pull_highest_priority_element pulls the element having the highest priority so that it can be served before other elements. The element having the highest priority is typically the first element in the priority queue.
In operating system, priority queue is implemented to carry out the jobs and/or tasks based on their priority.
. If you executean infinite recursive function on a computer it will executeforever.
a. True
b.False
Answer:
b. False
Explanation:
If you execute an infinite recursive function on a computer it will NOT execute forever.
Which of the following electronic payments is ideal for micropayments?
A. purchasing cards
B. smart cards
C. none of the methods listed
D. electronic checks
Smart cards are ideal for micropayments.
What is transaction? Differentiate between pre-emptiveand non pre-emptive transactions
Answer: Transaction is the process of processing information in a standalone system or distributed system. There are two basic types of systems which are preemptive and non preemptive transactions.
Explanation:
Transaction can be complete successfully or it can fail but it can never be partially completed. Computer processes which completes in its entirety or does not complete at all are termed as processes.
Preemptive processes are those where the cpu is allotted to a process for a definite time . The cpu can be given to another process if it has higher priority.
Whereas in non preemptive processes the cpu once allotted to a process cannot be assigned to another process until job is finished for the first process.
The purpose of a database is to help people stop using spreadsheets.
Answer:
Yes, the purpose of a database in a way is to stop people from using spreadsheets but, it is also so much more.
Explanation:
Databases are a vastly improved form of a spreadsheet. They allow Computer Scientists to automatize a company's information. Giving them the ability to instantly add, retrieve, and modify specific information within a database of hundreds or even thousands of entries. All this with little or no human input. Thus saving a company time and money as opposed to using a regular spreadsheet which requires manual input from an employee.
I hope this answered your question. If you have any more questions feel free to ask away at Brainly.
All of the followingshould be followed by entrepreneur for being effective
leader,EXCEPT:
a. Show respect foremployees
b. Show concern foremployees’ welfare
c. Try to do everythinghimself
d. Encourage and praiseothers
Answer:
C - Try to do everything himself
Explanation:
It is usually never advisable for an entrepreneur to attempt to do everything themselves. Delegation (assigning a task to a subordinate) is an important aspect of entrepreneurial leadership, this benefits the entreprenuer himself and allows his employees to feel a sense of confidence because they were trusted witht the task and it is a chance to show what they are capable of.
How do you return a value from a function?
Answer:
return instruction used to return a value from a function.
Explanation:
Function is a block of statement which perform the special task.
Syntax for define a function:
type name(parameter_1, parameter_2,...)
{
statement;
return variable;
}
In the syntax, type define the return type of the function. It can be int, float, double and also array as well. Function can return the array as well.
return is the instruction which is used to return the value or can use as a termination of function.
For return the value, we can use variable name which store the value or use direct value.
Which keyboard shortcut is typically used to move to the previous entry box?
A. Ctrl+Enter
B. Tab
C. Enter
D. Ctrl+Tab
Answer:
D. Ctrl+Tab
Explanation:
The Ctrl+Tab shortcut is typically used to move to the previous entry box.
Write a C++ program that determines if a given string is a palindrome. A palindrome is a word or phrase that reads the same backward as forward. Blank, punctuation marks and capitalization do not count in determining palindromes. Here is some examples of palindromes:
Radar
Too hot to hoot
Madam!I'm adam
A C++ program to determine if a given string is a palindrome involves converting the string to the same case, removing non-alphanumeric characters, and then checking if the string is equal to its reverse. Below is a sample code that performs these steps:
#include
#include
#include
#include
bool isPalindrome(const std::string& str) {
std::string sanitized;
for (char ch : str) {
if (std::isalnum(ch))
sanitized += std::tolower(ch);
}
std::string reversed = sanitized;
std::reverse(reversed.begin(), reversed.end());
return sanitized == reversed;
}
int main() {
std::string input;
std::cout << "Enter a string to check if it is a palindrome: ";
std::getline(std::cin, input);
bool result = isPalindrome(input);
if(result) {
std::cout << "The string is a palindrome." << std::endl;
} else {
std::cout << "The string is not a palindrome." << std::endl;
}
return 0;
}
In the above program, the function isPalindrome takes a string and creates a sanitized copy by iterating over each character, checking if it is alphanumeric (ignoring spaces and punctuation), and converting it to lowercase. After constructing the sanitized string, it creates a reversed version and compares the two. The main function reads a string from the user, calls the isPalindrome function, and outputs the result.
Find the second largest and second smallest element in a given array. You can hardcode/declare the array in your program.
Answer:
Program for Second largest in an array:-
#include <bits/stdc++.h>
using namespace std;
int main()
{
int f,s,n; //declaring 3 variables f for first largest s for second largest n is size.
cin>>n;//taking input size of the array.
if(n<2)//n should be greater than 2..
cout<<"n should be greater than 2"<<endl;
int a[n];// array of size n.
for(int i=0;i<n;i++)
{
cin>>a[i];
}
f = s = INT_MIN;//initialising f and s with minimum value possible.
for (int i =0; i <n;i ++)
{
if (a[i] > f)
{
s = f;
f = a[i];
}
else if (a[i] > s && a[i] != f)
s = a[i];
}
if (s == INT_MIN)
cout<<"No second largest exists"<<endl;
else
cout<<"Second largest element is :"<<s;
return 0;
}
Program for second smallest element is:-
#include <bits/stdc++.h>
using namespace std;
int main()
{
int f,s,n; //declaring 3 variables f for first smallest s for second smallest n is size.
cin>>n;//taking input size of the array.
if(n<2)//n should be greater than 2..
cout<<"n should be greater than 2"<<endl;
int a[n];// array of size n.
for(int i=0;i<n;i++)
{
cin>>a[i];
}
f = s = INT_MAX;//initializing f and s with maximum value possible.
for (int i =0; i <n;i ++)
{
if (a[i]<f)
{
s = f;
f = a[i];
}
else if (a[i] < s && a[i] != f)
s = a[i];
}
if (s == INT_MAX)
cout<<"No second smallest exists"<<endl;
else
cout<<s;//it is the second smallest element...
return 0;
}
Explanation:
For Second largest:-
1. Declare 3 variables f, s and n. where n is size the array f is first largest and s is second largest.
2. Initialize f and s with minimum value possible.
3. Iterate over the array a and do the following steps:-
1.If element at ith position is greater than f. Then update f and s.
s=f and f=a[i].
2.If the element is between s and f then update s as.
s=a[i].
4. Print s because it is the second largest in the array.
For Second smallest:-
1. Declare 3 variables f, s and n. where n is size the array f is first smallest and s is second smallest.
2. Initialize f and s with minimum value possible.
3. Iterate over the array a and do the following steps:-
1.If element at ith position is smaller than f. Then update f and s.
s=f and f=a[i].
2.If the element is between s and f then update s as.
s=a[i].
4. Print s because it is the second smallest in the array.
Write a program which prompts user to enter a character, if the user presses „Z‟, the program asks user to enter a number. In this case the program implements 5-input majority voting logic which is explained as follows.The value of the number represented by the five leftmost bits of Register-B is tested. If the number of logic '1' bits (in the 5 leftmost bits) is greater than the number of logic '0' bits, the program should output: "The number of 1’s in the 5 left most bits is greater than the number of 0’s". If the number of logic '0' bits (in the 5 leftmost bits) is greater than the number of logic '1' bits, the program should output: "The number of 0’s in the 5 left most bits is greater than the number of 1’s"
for a small to medium enterprise , the benefits of setting up an e-commerce store front include ( choose all that apply)
A. The ability to offer a larger selection of products
B. the ability to reach a wider customer base
C. the ability to eliminate advertising
D. the ability to offer lower prices to customers
Answer:
All of the above
Explanation:
The ability to reach a wider customer base, the ability to offer lower prices to customers, the ability to offer a larger selection of products and the ability to eliminate advertising. The correct options are A, B, C and D.
What is e-commerce store front?An electric storefront is a web-based solution that allows business owners to advertise and sell goods and services over the internet.
This is a fundamental form of e-commerce in which the buyer and seller interact directly.
To enable merchants to sell their products online, it combines transaction processing, security, online payment, and information storage.
A storefront, also known as a shopfront, is the facade or entryway of a retail store on the ground floor or street level of a commercial building, typically with one or more display windows.
A storefront's purpose is to draw attention to a company and its products.
The makes it possible to reach a larger customer base, to offer lower prices to customers, to offer a larger selection of products, and to eliminate advertising.
Thus, all options are correct.
For more details regarding storefront, visit:
https://brainly.com/question/971394
#SPJ2
Write a program to print out the digits of a number in English. For example, if the number is 153, the output should be “One Five Three.” This program should allow users to input the number by using keyboard
Answer:
#include <bits/stdc++.h>
using namespace std;
string value(int i)//function return the string of the integer..
{
if(i==0)
return "Zero";
if(i==1)
return "One";
if(i==2)
return "Two";
if(i==3)
return "Three";
if(i==4)
return "Four";
if(i==5)
return "Five";
if(i==6)
return "Six";
if(i==7)
return "Seven";
if(i==8)
return "Eight";
if(i==9)
return "Nine";
}
int main() {
int n,a[100],c=0;
cout<<"Enter the integer"<<endl;
cin>>n;//taking input of n..
while(n>0)//storing the integer in the array in reverse order..
{
int digit=n%10;
a[c++]=digit;
n/=10;
}
int s=0,e=c-1;
while(s<=e)//reversing the array.
{
int temp=a[s];
a[s]=a[e];
a[e]=temp;
s++;
e--;
}
for(int i=0;i<c;i++)//printing the string according to the number..
{
cout<<value(a[i])<<" ";
}
cout<<endl;
return 0;
}
Output:-
Enter the integer
230
Two Three Zero
Explanation:
I have created a function which returns string according to the integer.So i have taken an array to store the digits of the number and reversing it so the number is stored as it is in the array.Then printing the numbers accordingly.
What is the output after the following code executes?
int x=10; if ( ++x > 10 ) {
x = 13;
}
cout << x;
Answer:
13
Explanation:
First understand the meaning of ++x, it is a pre-increment operator.
it means, it increase the value first than assign to the variable.
For example:
x=10
then after executing ++x, the value of x is 11.
it increase the value and assign to x.
In the question:
The value of x is 10. After that, program moves to the if condition and check for condition (++x > 10) means (11 > 10) condition true.
then, 13 assign to x.
After that value of x is printed as 13.
Final answer:
The C++ code increments the variable x to 11 due to the pre-increment in the if statement, then changes x to 13 within the if block. Thus, the output of the code, when executed, is 13.
Explanation:
When the C++ code provided is executed, the statement int x=10; initializes the variable x with the value 10. The subsequent if statement checks if ++x > 10, where ++x is a pre-increment operation that increases x by 1 before the comparison. Since x is incremented to 11 before the comparison, the if block is executed, setting x to 13. The cout << x; statement then outputs the value of x, which at this point will be 13.
The characters << indicate that the value to the right is to be sent to the cout, which identifies the standard output stream. For cout to work, we need the inclusion of the iostream header file and the usage of the using namespace std; directive.
What are the attributes of agood Software Test?
Answer:
The features of a software test to be efficient are basically used to measure the quality control so that prevention can be provided from the errors or sort of defects. These characterstics are used for quality assurance and focuses on detecting the efficiency of the products and its services.
The some characteristics of a good software test are as follows:
Testing-ability - System should reliable on detection of any failure or error.
Efficiency -should be reliable enough to carry out tasks .
Reusability - Should be useful for several purpose at different times.
Maintainability - maintenance should be easy and efficient.
What is the difference between an argument and a parameter variable?
Answer:
The value enter in the function calling is called argument. Argument passed to function.
The variable declare in the function to capture the pass value from the calling function is called parameters.
Explanation:
Argument is used in the calling function and parameter is used in the defining the function.
for example:
//create the function
int count(parameter_1, parameter_2,.....)
{
statement;
}
count(argument_1. argument_1,.....); //call the function
What will the following C code print out?
int x = 7, y = 5;
if (x > 5)
if (y > 5)
printf(“x and y are > 5”);
else
printf(“x is <=5”);
a) “x and y are > 5”
b) “x is <=5”
c) nothing will be printed
Answer:
x is <=5
Explanation:
If-else is the statement that is used to execute the statement when the condition is true.
syntax:
if(condition){
statement;
}else{
statement;
}
if we do not provide the curly bracket, still the statement is valid.
in the question, x =7 and y=5
then, check the condition 7 > 5 condition true. it moves to the next if statement and check 5 > 5, condition false. Then it moves to the else part and executes the statement.
and print the output "x and y are > 5".
ETL stands for ---------------o Extract, transform and loado Extended transformation loadingo Enhanced logical transformation
Answer:
Extract, transform, and load
Explanation:
ETL stands for extract, transform, and load.
In Online Data Extraction data is extracteddirectly from the ------ system itself.o Hosto Destinationo Sourceo Terminal
Answer:
system itself.
Explanation:
In Online Data Extraction data is extracted directly from the system itself.
Discuss briefly general-purpose graphicsprimitives that contain 2D graphics library.
Answer:
General purpose graphics primitives that contain 2D graphic library as, it is used in graphics processing unit which typically manage computation for computer graphics. Graphic primitives contain basic element such as lines and curves. Modern 2D computer graphic system that operate with primitives which has lines and shapes. All the elements of graphic are formed from primitives.