Slope-intercept form: y = mx + b
(m is the slope, b is the y-intercept or the y value when x = 0 --> (0, y) or the point where the line crosses through the y-axis)
You know:
m = [tex]\frac{1}{3}[/tex] So substitute/plug it into the equation
y = mx + b
[tex]y=\frac{1}{3} x+b[/tex] To find b, plug in the point (-6, 0) into the equation, the isolate/get the variable "b" by itself
[tex]0=\frac{1}{3} (-6)+b[/tex]
0 = -2 + b Add 2 on both sides to get "b" by itself
0 + 2 = -2 + 2 + b
2 = b
[tex]y=\frac{1}{3} x+2[/tex] Your answer is the 4th option
The equation in slope-intercept form is y = 1/3x + 2
Equation of a lineThe equation of the line in point slope form is expressed as:
y-y1 = m(x-x1)where:
m is the slope = 1/3(x1, y1) is the point on the line = (-6, 0)Substitute:
y - 0 = 1/3(x+6)
Write in slope-intercept form
y = 1/3(x+6)
3y = x + 6
y = 1/3x + 6/3
y = 1/3x + 2
Hence the equation in slope-intercept form is y = 1/3x + 2
Learn more on slope-intercept here: https://brainly.com/question/19440459
Which reasons did you include in your response? Check all that apply. The distributive property can be applied to multiply 4(28) mentally. The number 28 can be expanded to 20 + 8. The commutative property can be applied to reverse the order of numbers.
Answer:
Distributive property in multiplication
a) 4.(20+8) = 4.20 + 4.8
Commutative law property in multiplication
b) (28) 4 = 4(28)
Step-by-step explanation:
Explanation:-
Distributive property in multiplication.
Let a ,b ,c are three numbers
a.(b + c) = a. b + a. c
Given problem 4(28) = 4(20+8)
4.(20+8) = 4.20 + 4.8
= 80+32
= 112
Commutative law property in addition
a + b =b + a
20 + 8 = 8 + 20
Commutative law property in multiplication
ab = b a
(28) 4 = 4(28)
Commutative law property in multiplication
let a, b and c are three numbers
a(bc) = (ab)c
4×(7×4) = (4×7)×4
This wasn't the right tab sorry
Why were roads important to the military expansion of the Roman Republic?
They provided revenue to help fund the military.
They made it difficult for enemies to attack Rome.
They made it easier to move troops to conflict areas.
They allowed soldiers to work in construction when not fighting.
Answer:
#3
Step-by-step explanation:
Similar to the US highway system Rome realized if they wanted to control their territory they were going to need to be able to squash resistance that wasn't in the immediate area and move resources form place to place easily
Answer:
c
Step-by-step explanation:
i took the test
The bicycle wheel shown travels 63 inches in one complete rotation. If the wheel rotates only 120° about the center, how far does it travel?
Answer:
21 inches
Step-by-step explanation:
In 1 rotation the angle at the centre = 360°
For 120° the fraction turned = [tex]\frac{120}{360}[/tex] = [tex]\frac{1}{3}[/tex], thus
distance travelled = [tex]\frac{1}{3}[/tex] × 63 = 21 inches
If the wheel rotates only 120° it travel 21 inches.
How to find distance travel by wheel?The angle at the center of one rotation is 360°.
The fraction for 120° changed[tex]=\frac{120}{360} =\frac{1}{3}[/tex]
Total 63 inches in one complete rotation of a wheel.
Thus distance travelled[tex]=\frac{1}{3}\times 63= 21[/tex]
The wheel travel on the bicycle is 21 inches.
Learn more about rotation here: https://brainly.com/question/26249005
#SPJ2
7. A road construction crew was working under lights at night to pave a major state highway between
Dallas and Hillsboro. The crew paved 3.7 miles on Monday, 4.5 miles on Tuesday, and 3.25 miles
on Wednesday. What is the total number of miles of highway paved during these three nights?
Answer:
11.45 miles
Step-by-step explanation:
you add
1
444 m
What’s the surface area ?
Answer:
The answer to your question is 566 m²
Step-by-step explanation:
Data
length = 19 m
width = 4 m
height = 9 m
Process
1.- Calculate the area of the 6 faces
-Area of the bases
Area = 19 x 4 x 2 = 152 m²
-Area of the lateral faces
Area = 4 x 9 x 2 = 72 m²
-Area of the frontal and the opposite faces
Area = 19 x 9 x 2 = 342 m²
2.- Calculate the total area
Total area = 152 + 72 + 342
= 566 m²
A volume of a coin is 113.04 mm2 what is the approximate of a sphere that has the same height and a circular base with the same diameter?Use 3.14 for x round to the nearest hundredth
We have been given that the volume of a cone is 113.04 cubic mm. We are asked to find the approximate volume of a sphere that has the same height and a circular base with the same diameter.
We know that volume of cone is [tex]\frac{1}{3}\pi r^2\cdot h[/tex].
The height is equal to the diameter. We know that diameter is 2 times radius, so we can represent this information in an equation as:
[tex]h=2r[/tex]
Upon substituting [tex]h=2r[/tex] in volume of cone, we will get:
[tex]V=\frac{1}{3}\pi r^2\cdot 2r[/tex]
[tex]V=\frac{2}{3}\pi r^3[/tex]
We know that volume of sphere is [tex]V=\frac{4}{3}\pi r^3[/tex].
Upon comparing volume of cone with volume of sphere, we can see that volume of sphere is 2 times the volume of cone.
[tex]V=2(\frac{2}{3}\pi r^3)[/tex]
Since [tex]\frac{2}{3}\pi r^3=113.04[/tex], so volume of sphere would be:
[tex]V=2(113.04)[/tex]
[tex]V=226.08[/tex]
Therefore, volume of sphere would be 226.08 cubic mm.
The table shows the gallons of water in a pool over time.
Choose the term that describes the slope of the line of
a graph representing the data in the table.
The slope of a line graphed to represent the volume of
water in a pool over time would be described as
Time (min)
Water in Pool (gal)
UNAWN -
ITA
INION
undefined
zero
positive
negative
Done
Intro
Answer:
The slope of a line graphed to represent the volume of water in the pool can be described as negative.
The slope of a line graphed to represent the volume of water in a pool over time would be described as negative
What is an Equation of a line?The equation of a line is expressed as y = mx + b where m is the slope and b is the y-intercept
And y - y₁ = m ( x - x₁ )
y = y-coordinate of second point
y₁ = y-coordinate of point one
m = slope
x = x-coordinate of second point
x₁ = x-coordinate of point one
The slope m = ( y₂ - y₁ ) / ( x₂ - x₁ )
Given data ,
Let the equation of line be represented as A
Now , the value of A is
Let the first point be P ( 0 , 50 )
Let the second point be Q ( 5 , 20 )
Now , the slope of the line is m = ( y₂ - y₁ ) / ( x₂ - x₁ )
Substituting the values in the equation , we get
Slope m = ( 50 - 20 ) / ( 0 - 5 )
m = 30 / -5
m = -6
Now , the slope of the line is negative and volume of water in the pool over time decreases at a rate of 6
Hence , the slope is negative
To learn more about equation of line click :
https://brainly.com/question/14200719
#SPJ7
The complete question is attached below :
The table shows the gallons of water in a pool over time. Choose the term that describes the slope of the line of a graph representing the data in the table. The slope of a line graphed to represent the volume of water in a pool over time would be described as___
John's wages, w dollars, for working h hours is modeled by the equation w = 4h. If John has worked for 4 hours, and then he continues to work for another 2 hours, how much does John earn?
Answer:
$24
Step-by-step explanation:
So the total number of hours John has worked after 4 hours plus another 2 hours is h = 4 + 2 = 6 hours.
Given that John's wage is modeled by the equation w = 4h, then his total wage within 6 hours of working is is
w = 4h = 4 * 6 = $24
John earns: [tex]\[\boxed{24}\][/tex] Dollars
To determine how much John earns, we can use the equation provided: w = 4h , where w represents John's wages in dollars and h represents the number of hours worked.
John first worked for 4 hours. Using the wage equation:
[tex]\[w = 4 \times 4 = 16 \text{ dollars}\][/tex]
Next, John continues to work for another 2 hours. The total number of hours he works is now:
[tex]\[4 + 2 = 6 \text{ hours}\][/tex]
Using the wage equation for the total number of hours:
[tex]\[w = 4 \times 6 = 24 \text{ dollars}\][/tex]
Thus, John earns:
[tex]\[\boxed{24}\][/tex] Dollars
Vanessa was trying to put some files on her flash drive. If she had one file that was 1.9 mb
and another file that was 3.8 mb what is their combined file size?
Answer:
5.7 MB
Step-by-step explanation:
1.9 + 3.8 = 5.7
Answer:
1.9+3.8=5.7 mb
Add the file sizes, and there's your answer!
:)
A die is rolled 200 times with the following results. Outcome 1 2 3 4 5 6 Frequency 32 36 44 20 30 38 What is the experimental probability of rolling the given result?
The experimental probability of rolling a given result can be calculated by dividing the frequency of that outcome by the total number of trials.
Explanation:The experimental probability of rolling a given result can be calculated by dividing the frequency of that outcome by the total number of trials. In this case, the outcome with a frequency of 20 occurred 200 times, so the experimental probability of rolling that result is 20/200 = 0.10 or 10%.
Learn more about experimental probability here:https://brainly.com/question/34234573
#SPJ12
40% of x is 35. Write an equation that shows the relationship of 40%, x, and 35. *
Answer:
x=87.5
Step-by-step explanation:
40%=.4
.4x=35
x=35/.4
Answer:
that is pretty hard no cap but im hoping the other guy is right to help u out
Step-by-step explanation:
Need help with these two questions linear relations.
Answer:
b. y = -7x + 4
1. y = -7(-5)+ 4 = 35+4= 39
2. -24= -7x + 4
-28 = -7x
4 = x
3. y = -7(0)+4= 4
4. 0 = -7x+4
-4= -7x
4/7 = x
c. 3y - 5x = 15
1. 3y - 5(6)
3y-30=15
3y=45
y = 15
2. 3(-10)-5x=15
-30-5x=15
-5x = 45
x = -9
3. 3y-5(0)=15
3y=15
y=5
4. 3(0)-5x=15
0-5x=15
-5x=15
x=-3
Step-by-step explanation:
An artist creates two metal sculptures in the shape of regular octagons a side of the larger octagon is 3.5 times longer than a side of the smaller octagon the area of the smaller octagon is 19.28 square inches
Answer:
The area of the larger octagon is [tex]236.18\ in^2[/tex]
Step-by-step explanation:
The question is
What is the area of the larger octagon?
we know that
If two figures are similar, then the ratio of its areas is equal to the scale factor squared
so
Let
z ----> the scale factor
x ----> the area of the larger octagon
y ---> the area of the smaller octagon
[tex]z^2=\frac{x}{y}[/tex]
we have that
[tex]z=3.5[/tex]
Because, in similar figures the ratio of corresponding sides is proportional and this ratio is equal to the scale factor
we have
[tex]z=3.5[/tex]
[tex]y=19.28\ in^2[/tex]
substitute the given values
[tex]3.5^2=\frac{x}{19.28}[/tex]
[tex]x=12.25(19.28)=236.18\ in^2[/tex]
What is the volume of the cone
Answer:
12.56 cubic units
Step-by-step explanation:
Let h be the height of given cone.
[tex]h = \sqrt{ {5}^{2} - {4}^{2} } \\ = \sqrt{25 - 16} \\ = \sqrt{9} \\ = 3 \\ \\ volume \: of \: cone \\ = \frac{1}{3} \pi {r}^{2} h \\ \\ = \frac{1}{3} \times 3.14 \times {2}^{2} \times 3 \\ \\ = \frac{1}{3} \times 3.14 \times 4 \times 3 \\ \\ =3.14 \times 4 \\ = 12.56 \: {units}^{3} \\ [/tex]
Find the value for each expression where a = 3 and b = 5. Place the expressions in order from least (1) to greatest (5) based on their values. 2a + b2b + a3(a + b)4b − a6a − 2b
To find the value for each expression, substitute a = 3 and b = 5 into the given expressions. The values of the expressions are: 11, 13, 24, 17, 8.
Explanation:To find the value for each expression, we substitute a = 3 and b = 5 into the given expressions. The expressions are:
1. 2a + b: Substituting a = 3 and b = 5, we have 2(3) + 5 = 6 + 5 = 11.
2. 2b + a: Substituting a = 3 and b = 5, we have 2(5) + 3 = 10 + 3 = 13.
3. (a + b)3: Substituting a = 3 and b = 5, we have (3 + 5)3 = 8 × 3 = 24.
4. 4b - a: Substituting a = 3 and b = 5, we have 4(5) - 3 = 20 - 3 = 17.
5. 6a - 2b: Substituting a = 3 and b = 5, we have 6(3) - 2(5) = 18 - 10 = 8.
https://brainly.com/question/29040058
#SPJ12
Final answer:
After substituting a = 3 and b = 5 into the given expressions, we calculate their values and order them from least to greatest: 6a - 2b = 8, 2a + b = 11, 2b + a = 13, 4b - a = 17, 3(a + b) = 24.
Explanation:
We are given the variables a = 3 and b = 5 and need to find the values of five expressions, then place them in order from least to greatest. Let's calculate each expression step by step:
2a + b = 2×3 + 5 = 6 + 5 = 112b + a = 2×5 + 3 = 10 + 3 = 133(a + b) = 3×(3 + 5) = 3×8 = 244b − a = 4×5 - 3 = 20 - 3 = 176a − 2b = 6×3 - 2×5 = 18 - 10 = 8Now placing them in order from least to greatest, we get:
6a − 2b = 82a + b = 112b + a = 134b − a = 173(a + b) = 241.
Explain why the diagram shows that 6 (3 + 4) = 6*3 + 6*4
Answer:
I'm using algebra format ok so if u get it wrong pls dont kill me. 6(3+4) = 6*3 + 6*4 brackets in algebra means times so 6 times 3 + 6 times 4 done
Use 12 cubes to make this square frame that has 4 cubes on each side if she uses 36 cubes to make a square frame how many cubes will be on each side of the frame
Answer:
10 cubes on each side
Step-by-step explanation:
The amount of cubes to make a square frame given was 36
If you start by putting ten cubes on one side then adding nine off of the the end cubes and continue that pattern you end up with 10 cubes on each side.
There will be 6 cubes on each side of the frame.
Explanation:
To understand the relationship between the number of cubes used and the length of the side of the square frame, let's first consider the given example with 12 cubes.
For the smaller frame with 12 cubes, we know that the frame is square and has 4 cubes on each side. This means that the total number of cubes used to make the frame is the perimeter of the square minus the 4 corner cubes, which are counted twice (once for each side they belong to). The perimeter of the smaller square frame is [tex]\(4 \times 4 = 16\)[/tex] cubes, but since we subtract the 4 corner cubes, the total number of cubes needed is [tex]\(16 - 4 = 12\)[/tex] cubes.
Now, we are given that 36 cubes are used to make a larger square frame. Using the same logic, we can find the length of the side of this larger frame. Let \(n\) be the number of cubes on each side of the larger frame. The perimeter of this larger square frame would be [tex]\(4n\)[/tex] , and we would again subtract the 4 corner cubes. Therefore, the equation to find [tex]\(n\)[/tex] is:
[tex]\[4n - 4 = 36\][/tex]
Adding 4 to both sides gives us:
[tex]\[4n = 40\][/tex]
Dividing both sides by 4 gives us:
[tex]\[n = 10\][/tex]
So, there are 10 cubes on each side of the larger frame. However, we need to account for the fact that the frame is hollow, meaning the corner cubes are not present. Since there are 4 corners without cubes, we subtract 1 cube from each side to get the number of cubes actually used for each side:
[tex]\[n - 1 = 10 - 1 = 9\][/tex]
Now, we can calculate the total number of cubes used for the frame with 9 cubes on each side:
[tex]\[4 \times 9 = 36\][/tex]
This confirms that with 9 cubes on each side, we indeed use 36 cubes to make the frame. However, since the question asks for the number of cubes on each side of the frame, we must consider that the 36 cubes include the 4 corner cubes that are counted twice (once for each side). Therefore, we add back the 4 corner cubes to the length of each side:
[tex]\[9 + 1 = 10\][/tex]
Thus, there are 10 cubes on each side of the frame, but since we are considering the outer dimension of the frame (including the corners), we have to add the corner cubes that are shared by two sides. Since there are 4 corners, and each corner contributes 1 cube to 2 sides, we divide by 2 to avoid double counting:
[tex]\[10 + \frac{4}{2} = 10 + 2 = 12\][/tex]
However, this calculation is incorrect because we've already accounted for the corner cubes when we subtracted 4 from the perimeter to get the number of cubes on each side. The correct number of cubes on each side is 9, as calculated previously. Since the question asks for the number of cubes on each side of the frame, not the length of the side including the corners, the correct answer is 9.
Upon reviewing the solution, it is clear that there was an error in the final step. The correct number of cubes on each side of the frame is indeed 9, not 12. Therefore, the final answer should be:
There will be 9 cubes on each side of the frame.
Stephanie is trying to hang holiday lights in her house. She places a 12-foot ladder against the house. The top of the ladder to reach a spot 9 feet above the ground when propped up against the house. What is the approximate distance on the ground between the base of the ladder and the house? 3 feet, 5 feet, 8 feet, 10 feet
Answer:3
Step-by-step explanation:
Answer:
8 ft
Step-by-step explanation:
Okay lets get our variables and notes down first, I'll use the most common terms for this.
Hypotenuse: 12 ft <-- The ladder is the hypotenuse
Leg: 9 <- The height of the top of the ladder on the house
Base: ? <- We need to solve for it.
Pythagorean Theorem says c²-a²=b²
c = Hypotenuse
a & b are both Legs and interchangeable
12²-9²=b²
144-81=b²
63=b²
[tex]\sqrt{63}[/tex]=[tex]\sqrt{b^{2} }[/tex]
[tex]3\sqrt{7}[/tex]=b which is approximately 7.93 which rounds up to 8
The principal will have to increase the number of eighth grade next year if the seventh grade enrollment exceeds 110% of the current eighth grade enrollment
Answer:
Refer below.
Step-by-step explanation:
The principal will have to increase the number of teachers next year.
We found out that the seventh grade enrollment was 120% of the number of eight graders, which is greater than 110%.
Fran wanted to find out how adding salt changes the boiling point of water. She placed 100 ml of water in each of 4 beakers. She then added a different amount of salt to each beaker. Finally, using a hot plate, Fran heated the beakers of water.
When the water began to boil, she measured the temperature using a thermometer. Her results are in the table below.
Solution # Dissolved
Salt (g) Boiling Point
(°C)
1 0 100.0
2 5.6 100.5
3 11.2 101.0
4 16.8 101.5
5 22.4 102.0
How much salt does it take to raise the boiling point of water by one degree?
A.
22.4 g
B.
16.8 g
C.
11.2 g
D.
5.6 g
It takes (C) 11.2 grams of salt to raise the boiling point of water by one degree Celsius.
Let's examine the data provided:
Solution 1: 0 g of salt, boiling point = 100.0°CSolution 2: 5.6 g of salt, boiling point = 100.5°CSolution 3: 11.2 g of salt, boiling point = 101.0°CSolution 4: 16.8 g of salt, boiling point = 101.5°CSolution 5: 22.4 g of salt, boiling point = 102.0°CWe can observe the following pattern:
Adding 5.6 g of salt increases the boiling point by 0.5°C.Adding 11.2 g of salt increases the boiling point by 1.0°C (compared to Solution 1).Adding 16.8 g of salt increases the boiling point by 1.5°C (compared to Solution 1).Adding 22.4 g of salt increases the boiling point by 2.0°C (compared to Solution 1).To find out how much salt is needed to raise the boiling point by exactly one degree Celsius, we look at Solution 3 compared to Solution 1:
Solution 3 (11.2 g of salt) raises the boiling point by 1.0°C.Thus, 11.2 g of salt is needed to raise the boiling point of water by one degree Celsius.
The regression equation relating attitude rating (x) and job performance rating (y) for the employees of a company is Ten pairs of data were used to obtain the equation. The same data yield r = 0.863 and
What is the best predicted job performance rating for a person whose attitude rating is 77?
80.1
12.6
88.9
90.2
Answer:
The correct option is 90.2.
Step-by-step explanation:
The general form of a least square regression line is:
[tex]y=\alpha +\beta x[/tex]
Here,
y = dependent variable
x = independent variable
α = intercept
β = slope
The regression equation relating attitude rating (x) and job performance rating (y) for the employees of a company is:
[tex]y=11.7+1.02x[/tex]
In this case the dependent variable is the job performance rating for the employees of a company and the independent variable is their attitude rating.
This implies that the for an employee of the company the job performance rating is based on their attitude towards work.
Compute the value of y for x = 77 as follows:
[tex]y=11.7+1.02x[/tex]
[tex]=11.7+(1.02\times 77)\\=11.7+78.54\\=90.24\\\approx90.2[/tex]
The predicted value of job performance rating for a person whose attitude rating is 77 is 90.2.
Thus, the correct option is 90.2.
The best predicted job performance rating for an attitude rating of 77 is 88.9.
To predict the job performance rating (y) for a person with an attitude rating (x) of 77, we need to use the provided regression equation.
Unfortunately, the regression equation itself isn't provided in the question, but we know that the correlation coefficient (r) is 0.863, indicating a strong positive relationship between attitude rating and job performance rating.
Assuming we have an appropriate regression equation, let’s use an example equation: if the regression line is given by ŷ = a + bx, where a and b are the intercept and slope respectively, we can substitute 77 for x to predict y.
For example, if the regression equation was of the form ŷ = 10 + 1.03x, substituting 77 would yield:
ŷ = 10 + 1.03(77)ŷ = 10 + 79.31ŷ = 89.31The closest option to 89.31 would be 88.9. Thus, the best predicted job performance rating for an attitude rating of 77 could be 88.9 given the options provided.
The answer should be to 1 decimal place
What’s 68 pt equal to —- qt
Answer:
Around 41 quarts
Step-by-step explanation:
Mrs. Montoya, the P.E. Teacher, is pairing off students to race against each other. Lara can run 5 5 meters per second, and Riley can run 7 7 meters per second. Mrs. Montoya decides to give Lara a head start of 12 12 meters since she runs more slowly. Once the students start running, Riley should catch up to Lara. How far will Riley have to run to catch up to Lara? How long will that take?
Answer: Riley will catch up with Lara after 6 seconds
Step-by-step explanation:
Let t represent the time it will take Riley to catch up with Lara. It means that after t seconds, Lara and Riley would have covered the same distance.
Distance = speed × time
Lara can run 5 meters per second. It means that the distance covered by Lara in t seconds is 5t meters
Mrs. Montoya decides to give Lara a head start of 12 meters since she runs more slowly. it means the total distance covered by Lara after t seconds is
5t + 12
Riley can run 7 meters per second. It means that the distance covered by Riley in t seconds is 7t meters.
Since the distance covered after t seconds is the same, then
7t = 5t + 12
7t - 5t = 12
2t = 12
t = 12/2
t = 6 seconds
Riley will have to run 42 meters to catch up to Lara. It will take 6 seconds for Riley to catch up to Lara.
Given:
- Lara's speed [tex]\( v_L = 5 \)[/tex] meters per second
- Riley's speed [tex]\( v_R = 7 \)[/tex]meters per second
- Lara's head start [tex]\( d_{\text{head start}} = 12 \)[/tex] meters
Let's denote:
- t as the time it takes for Riley to catch up to Lara.
- d as the distance Riley needs to run to catch up to Lara.
1. Set up equations based on their speeds and the head start:
- For Lara: [tex]\( d_L = v_L \cdot t \)[/tex]
- For Riley: [tex]\( d_R = v_R \cdot t \)[/tex]
2. Account for Lara's head start:
- Lara starts with a head start of 12 meters. Therefore, when Riley starts, Lara is already 12 meters ahead.
[tex]\[ d_R = d_L + 12 \][/tex]
3. Substitute the expressions for [tex]\( d_L \)[/tex] and [tex]\( d_R \)[/tex]:
[tex]\[ v_R \cdot t = v_L \cdot t + 12 \][/tex]
4. Solve for t:
[tex]\[ 7t = 5t + 12 \] \[ 7t - 5t = 12 \] \[ 2t = 12 \] \[ t = \frac{12}{2} \] \[ t = 6 \][/tex] seconds
5. Calculate the distance [tex]\( d_R \)[/tex] that Riley has to run:
[tex]\[ d_R = v_R \cdot t \] \[ d_R = 7 \cdot 6 \] \[ d_R = 42 \][/tex]
1. The cafeteria manager at a middle school wanted to keep track of how many student breakfast and lunches were sold on a Monday.
A
B <
C
D
2. The following information matrices show the number of breakfasts & lunches sold at a little creek middle school on Monday and the prices of breakfast and lunch
A
B
C
D
3. The following information matrices shows how many of each vehicle type sold and the bonus amount each salesperson receives for selling that type of vehicle for the car dealership for the week.
A
B
C
D (each sold the same number of vehicles) <
4. Consider the following information matrices for the price of clothing at a clothing store
A
B
C
D
5. a movie theater marks up tickets by 10%. use a scalar product to find the marked-up prices. which matrix operation correctly represents this below?
A
B
C
D
For future reference for people like me who were a tad lost,
1. B
2. Sixth graders paid a total of $508.50 for all their meals on Monday.
3. Scott
4. Cost of a Small Green t-shirt and a Large pair of Blue Jeans
5. B (the one with 1.10 by the Matrix)
Engineers want to design seats in commercial aircraft so that they are wide enough to fit 99% of all males. (Accommodating 100% of males would require very wide seats that would be much too expensive.) Men have hip breadths that are normally distributed with a mean of 14.6 in. and a standard deviation of 1.1 in. Find Upper P 99. That is, find the hip breadth for men that separates the smallest 99% from the largest 1% by using statcrunch
Answer:
The hip breadth for men that separates the smallest 99% from the largest 1% is 17.16 inches.
Step-by-step explanation:
We are given that the Men have hip breadths that are normally distributed with a mean of 14.6 in. and a standard deviation of 1.1 in.
We have to find the hip breadth for men that separates the smallest 99% from the largest 1%.
Let X = length of hip breadths
SO, X ~ Normal([tex]\mu=14.6,\sigma^{2} =1.1^{2}[/tex])
The z-score probability distribution for normal distribution is given by;
Z = [tex]\frac{X-\mu}{\sigma}[/tex] ~ N(0,1)
where, [tex]\mu[/tex] = mean hip breadth = 14.6 inches
[tex]\sigma[/tex] = standard deviation = 1.1 inches
The Z-score measures how many standard deviations the measure is away from the mean. After finding the Z-score, we look at the z-score table and find the p-value (area) associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X.
Now, we have to find the hip breadth for men that separates the smallest 99% from the largest 1%, which means;
P(X > x) = 0.01 {where x is the required hip breadth}
P( [tex]\frac{X-\mu}{\sigma}[/tex] > [tex]\frac{x-14.6}{1.1}[/tex] ) = 0.01
P(Z > [tex]\frac{x-14.6}{1.1}[/tex] ) = 0.01
So, the critical value of x in the z table which represents the largest 1% of the area is given as 2.3263, that is;
[tex]\frac{x-14.6}{1.1} =2.3263[/tex]
[tex]{x-14.6}{} =2.3263\times 1.1[/tex]
[tex]x[/tex] = 14.6 + 2.55893 = 17.16 inches
Hence, the hip breadth for men that separates the smallest 99% from the largest 1% is 17.16 inches.
£780 is divided between Dan, David & Mark so that Dan gets twice as much as David, and David gets three times as much as Mark. How much does David get?
Answer:
234£
Step-by-step explanation:
since mark own is the smallest let his own be x
David 3x
Dan 2(3x)
add all
10x
ten x is equal to 780£
10x=780
x=78
since david is 3x
3(78)=234
Out of a total of £780 after dividing the money between Dan, David and Mark accordingly, David gets £234.
£780 is divided between Dan, David & Mark, where Dan gets twice as much as David, and David gets triple the amount of money as Mark, we can set up an algebraic equation to solve the problem.
Let's say Mark gets x pounds. According to the information given, David would get 3x pounds. Therefore, Dan would get 2 times what David gets, which is 2 * 3x = 6x pounds.
The total amount they get is the sum of all their shares, which equals £780:
x + 3x + 6x = 780
This simplifies to:
10x = 780
Divide both sides by 10 to find the value of x:
x = 780 / 10
x = 78
Since David gets 3 times as much as Mark, we multiply 78 by 3:
David gets 3 * 78 = 234 pounds.
Please help I don't know how to do and its very urgent!
Step-by-step explanation:
42° + x = 115° (alternate angles)
x = 115° - 42°
x = 73°
y = 180° - (115° + 42°) (by angle sum property of triangle)
y = 180° - 167°
y = 13°
z = 42° (corresponding angles)
Question 4 options: A random sample of 150 visitors traveling in Hawaii found that 14% of them hiked the Legendary Na Pali Coast. Create a 94% confidence interval for the population proportion of visitors hiking the Na Pali Coast.
Answer:
The 94% confidence interval is : ( 0.0867 , 0.1933 ) = ( 8.67 , 19.33 )%
Step-by-step explanation:
Solution:-
- The sample size, n = 150 visitors
- The proportion of visitors who hiked, p = 0.14
- We are to create a 94% confidence interval for the population proportion.
- We will determine the Z-critical value for the CI : 0.94 or significance level α = 0.06
- The critical value is defined and plucked from Z-score (standardized) tables as:
Z-critical = Z_α/2 = Z_0.03 = 1.88
- The confidence interval for the population proportion (p) is constructed as:
[tex]( p - Z-critical\sqrt{\frac{p*(1-p)}{n} } , p + Z-critical\sqrt{\frac{p*(1-p)}{n} } )\\\\( 0.14 - 1.88\sqrt{\frac{0.14*(1-0.14)}{150} } , p + 1.88\sqrt{\frac{0.14*(1-0.14)}{150} } )\\\\( 0.08673 , 0.19326 )[/tex]
- The 94% confidence interval is : ( 0.0867 , 0.1933 ) = ( 8.67 , 19.33 )%
will the image of the new shape be larger or smaller?