A chemical reaction was used to produce 2.54 moles of copper(II) bicarbonate, Cu(HCO3)2. What mass of copper(II) bicarbonate was produced?

Answers

Answer 1
Final answer:

The mass of copper(II) bicarbonate (Cu(HCO3)2) produced in the chemical reaction, if the yield is 2.54 moles, is approximately 563.3 grams.

Explanation:

To find the mass of copper(II) bicarbonate, we need to use the molar mass of copper(II) bicarbonate, which can be found by adding the molar masses of each constituent atom. Copper(II) bicarbonate, Cu(HCO3)2, has a molar mass of 221.6 grams/mole.

Knowing we've produced 2.54 moles, we can multiply this by the molar mass:

2.54 moles * 221.6 grams/mole = 563.3 grams.

Therefore, the mass of copper(II) bicarbonate produced is approximately 563.3 grams. This calculation is based on the principle of stoichiometry, which deals with the quantifiable relationship of reactants and products in a chemical reaction.

Learn more about Stoichiometry here:

https://brainly.com/question/30218216

#SPJ3


Related Questions

How would you describe an electron

Answers

Answer:

an electron is part of the 3 things that are in an atom, it has a negative charge

A shallow river dries up is an example of


Condensation
Evaporation
Precipitation
Runoff

Answers

Answer:

Evaporation

Explanation:

Evaporation is when liquid becomes a gas which is how the river dried up

A chemistry student needs 75 g of thiophene foran experiment. He has available 0.50 kg of a 29.3% w/w solution of thiophene in carbon tetrachloride.
Calculate the mass of solution the student should use. Ifthere's not enough solution, press the "No solution" button.

Answers

Answer: The mass of solution the student should use is 256 g

Explanation:

Given : 29.3 % w/w which means that 29.3 g of solute is present in 100 g of solution

Thus 100 g of solution contains = 29.3 g of solute

0.50 kg or 500 g of solution contains = [tex]\frac{29.3}{100}\times 500=146.5[/tex] g of solute   (1kg=1000g)

146.5 g of solute is available in = 500 g of solution

Thus 75 g of solute is available in = [tex]\frac{500}{146.5}\times 75 g=256g[/tex] of solution

Thus the mass of solution the student should use is 256 g

If'substance X is a liquid, substance Y is a gas, and substance Z is a solid, and all are at the
same temperature and pressure, then the order of increasing strength of their intermolecular
forces would be

Answers

The answer is Y < X < Z

Final answer:

The order of increasing strength of intermolecular forces for substance X (liquid), Y (gas), and Z (solid) is: Y < X < Z, with the gas having the weakest and the solid having the strongest intermolecular forces.

Explanation:

If we consider substances X, Y, and Z, which are a liquid, a gas, and a solid respectively, and they are all at the same temperature and pressure, the order of increasing strength of their intermolecular forces can be determined based on their states of matter. Given that substances with stronger intermolecular forces are more likely to be a solid at room temperature and will have a higher boiling point, it follows that the solid will have the strongest forces, followed by the liquid, and then the gas. Consequently, substance Z (the solid) would have the strongest intermolecular forces, substance X (the liquid) would have intermediate forces, and substance Y (the gas) would have the weakest forces.

An equivalent is:___________
a) an equivalent is the amount of ion that has a 1+ charge.
b) 1 mole of an ionic compound.
c) 1 mole of any ion. the amount of ion that carries 1 mole of electrical charge.
d) the amount of ion that has a 1- charge.

Answers

Answer:

The amount of ion that carries 1 mole of electrical charge

Explanation:

One equivalent: In reaction stoichiometry, the amount of one substance that reacts with one mole of another substance. This will often (but not always) be a 1:1 mole ratio.

An equivalent is  the amount of ion that carries 1 mole of electrical charge.

An equivalent is the amount of a substance that reacts with one mole of another substance in a given chemical reaction.

It is a unit of measurement in Stoichiometry that helps to describe the amount of ion that carries 1 mole of electrical charge.

Examples include:

1 mole of Na⁺ = 1 Eq1 mole of Cl⁻ = 1 Eq1 mole of Ca²⁺ = 2 Eq

Thus, we can conclude that  an equivalent is  the amount of ion that carries 1 mole of electrical charge.

Learn more about equivalent here: https://brainly.com/question/15119175

Complete the following two statements regarding quantum-mechanical concepts associated with the Bohr model of the atom and refinements that resulted from the wave-mechanical atomic model. " Two important quantum-mechanical concepts associated with the Bohr model of the atom are that electrons are particles moving in _______
Enter your answer for the missing word between words "moving in" and "orbitals" in accordance to the question statement discrete orbitals, and electron energy is quantized into
Enter your answer for the missing word after words "quantized in" in accordance to the question statement levels .
(b) Two important refinements resulting from the wave-mechanical atomic model are that the electron position is described in terms of a Enter your answer for the missing words after words "in terms of a" in accordance to the question statement electron cloud , and electron energy is quantized into both shells and subshells--each electron is characterized by Enter your answer for the missing word after words "is characterized by" in accordance to the question statement quantum numbers."

Answers

Answer:

Two important quantum-mechanical concepts associated with the Bohr model of the atom are (1) that electrons are particles moving in discrete orbitals, and (2) electron energy is quantized into shells. (b) Two important refinements resulting from the wave-mechanical atomic model are (1) that electron position is described in terms of a probability distribution, and (2) electron energy is quantized into both shells and subshells--each electron is characterized by four quantum numbers.

Explanation:

Part A:

The two important quantum-mechanical concepts associated with the Bohr model of the atom are:

(1) Electrons are particles moving in discrete orbitals.

(2) Electron energy is quantized into shells.

Part B:

The two important refinements resulting from the wave-mechanical atomic model are:

That electron position is described in terms of a probability distribution.The electron energy is quantized into both shells and subshells each electron is characterized by four quantum numbers.

Learn more :

https://brainly.com/question/3964366?referrer=searchResults

A solution containing 1.0 M NiCl2 and 1.0 M SnBr2 undergoes electrolysis by passing a current between two platinum electrodes. What are the most likely first products to be formed? Cl2 (aq) + 2e- → 2Cl- (aq) ℰ°= 1.36 V Br2 (aq) + 2e- → 2Br- (aq) ℰ° =1.08 V Sn2+ (aq) + 2e- → Sn(s) ℰ° = -0.14 V Ni2+ (aq) + 2e- → Ni(s) ℰ°= -0.24 V

Answers

Answer:

Sn2+ (aq) + 2e- → Sn(s) ℰ° = -0.14 V

Explanation:

A close look at all the options shows that the most feasible first reaction is the reduction of tin II ion to ordinary metallic tin.

Given the two half cells, nickel is oxidized in one half cell to Ni II while in the second half cell, tin II ion is reduced to metallic tin. The platinum electrodes simply act as electron conduits in the cell.



1. What mass of the following chemicals is needed to make the solutions indicated?

a. 1.0 liter of a 1.0 M mercury (II) chloride (HgCl2) solution



b. 2.0 liters of a 1.5 M sodium nitrate (NaNO3) solution



c. 5.0 liters of a 0.1 M Ca(OH)2 solution



d. 100 mL of a 0.5 M (NH4)3PO4 solution



2. Calculate the molarity of the following solutions.

a. 12 g of lithium hydroxide (LiOH) in 1.0 L of solution



b. 198 g of barium bromide (BaBr2) in 2.0 L of solution



c. 54 g of calcium sulfide (CaS) in 3.0 L of solution



3. Calculate the volume of each solution, in liters.

a. a 1.0 M solution containing 85 g of silver nitrate (AgNO3)



b. a 0.5 M solution containing 250 g of manganese (II) chloride (MnCl2)



c. a 0.4 M solution containing 290 g of aluminum nitrate (Al(NO3)3)

Answers

The following questions are answered below

Explanation:

1.a. 1.0 liter of a 1.0 M mercury (II) chloride (HgCl2) solution

  1.0 L 1 mol 271.49 g

    L        1 L    1 mol

= 271.49 g

= HgCl₂ = 271.49 g HgCl₂

1.b. 2.0 liters of a 1.5 M sodium nitrate (NaNO3) solution

[tex]\frac{2.0 L}{1}[/tex][tex]\frac{1.5 mol}{L}[/tex][tex]\frac{85.01 g}{1 mol}[/tex]

= 255.03 g

= 255 g NaNo₃

1.c. 5.0 liters of a 0.1 M Ca(OH)2 solution

= 37 g Ca(OH)2

1.d. 100 mL of a 0.5 M (NH4)3PO4 solution

= 7.5 g (NH₄)₃PO₄

2. To find the molarity of the following solutions

2.a. 12 g of lithium hydroxide (LiOH) in 1.0 L of solution

= 0.50 m (LiOH)

2.b. 198 g of barium bromide (BaBr2) in 2.0 L of solution

= 0.33 m (BaBr₂)

2.c. 54 g of calcium sulfide (CaS) in 3.0 L of solution

= 0.25 m (CaS)

3. To find the volume of each solution

3.a. 1.0 M solution containing 85 g of silver nitrate (AgNO3)

= 0.50 L (AgNO₃)

3.b. 0.5 M solution containing 250 g of manganese (II) chloride (MnCl2)

= 4.0 L MnCl2

3.c. 0.4 M solution containing 290 g of aluminum nitrate (Al(NO3)3)

= 3.4 L (Al(NO₃)₃)

Acetic acid has a Ka of 1.8 * 10-5. Three acetic acid/acetate buffer solutions, A, B, and C, were made using varying concentrations: acetic acid ten times greater than acetate, acetate ten times greater than acetic acid, and acetate=acetic acid.
Match each buffer to the expected pH. pH = 3.74 ; pH = 4.74 ; pH = 5.74
Part B: How many grams of dry NH4Cl need to be added to 2.30 L of a 0.600 M solution of ammonia, NH3, to prepare a buffer solution that has a pH of 8.71? Kb for ammonia is 1.8 * 10-5.
Express your answer with the appropriate units.

Answers

Answer:

A)  acetic acid ten times greater than acetate pH = 3.74

B)  acetate ten times greater than acetic acid pH = 5.74

C) For solution 3: acetate=acetic acid pH = 4.74

Mass NH4Cl = 40.30 grams

Explanation:

Step 1: Data given

Ka is: 1.8 * 10^-5

Solution 1: acetic acid ten times greater than acetate

Solution 2: acetate ten times greater than acetic acid

Solution 3: acetate=acetic acid

Step 2: The pH formula

pH = pKa + log[CH3COO-]/[CH3COOH]

For solution 1:  acetic acid ten times greater than acetate this means ) [[CH3COO-]/[CH3COOH]) has a value of 1/10

pH = pKa + log[CH3COO-]/[CH3COOH]

pH = -log(1.8*10^-5) + log(1/10)

pH = 4.74 -1

pH = 3.74

For solution 2: acetate ten times greater than acetic acid

pH = pKa + log[CH3COO-]/[CH3COOH]

pH = -log(1.8*10^-5) + log(10)

pH = 4.74 + 1

pH = 5.74

For solution 3: acetate=acetic acid

pH = pKa + log[CH3COO-]/[CH3COOH]

pH = -log(1.8*10^-5) + log(1)

pH = 4.74 + 0

pH = 4.74

Part B: Calculate molarity

pOH = pKb + log [H

5.29= -log (1.8*10^-5)  + log [BH+]/[0.600 M]

5.29 = 4.744 + log [BH+]/[0.600 M]

0.546 = [BH+]/0.600

[BH+] = 0.3276 M

Moles NH4+ = 0.3276  M * 2.30 L

Moles NH4+ = 0.75348 moles

Moles NH4Cl = 0.75348 moles

Mass NH4Cl = 0.75348 moles * 53.49 g/mol

Mass NH4Cl = 40.30 grams

Why is the use of pesticides on soils and
crops harmful for humans?
A. Pesticides are carried across the surface
in runoff which can contaminate aquifers.
B. Pesticides kill organisms that can harm
plants.
C. Pesticides pollute wells that people drink
from.
D. Pesticides are evaporated with water and
contaminate the atmosphere.

Answers

Answer:

A.

Once it rains the pesticide goes down the runoff and pollute the water

The answer is: D.

Pesticides secrete into soils and groundwater which can end up in drinking water, and pesticide spray can drift and pollute the air.

What is the only force that acts between particles of helium gas?

Answers

Answer: The only force that acts between particles of helium gas is Vanderwaal forces.

Explanation:

When molecules are uncharged in nature but still combined together due to the dipole moment of elements then this force holding the molecules together is known as Vanderwaal forces.

This force is weak in nature.

For example, particles of helium gas has Vanderwaal force between its atoms.

Thus, we can conclude that the only force that acts between particles of helium gas is Vanderwaal forces.

Specific heat is used to explain why different substances
a) sink or float
b) change temp. at different rates
c) vaporize or condense at different temp.’s
d) melt and freeze at the same temp.

Answers

Answer:

change temperature at different rates

The specific heat is used to explain why different substances change the temperature at different rates.

Specific Heat:

It is the amount of heat that is required to increase the temperature of 1 kg of a substance by 1^oc. It is measured in the [tex]\bold {J/g/^oC }[/tex].

The specific heat capacity of water is [tex]\bold { 4.184 J/g/^oC.}[/tex]If the heat capacity is it takes more time to heat or cool it down. If specific heat capacity of a substance is low, then it takes less time to heat or cool it down.

Therefore, the specific heat is used to explain why different substances change the temperature at different rates.

To know more about specific heat, refer to the link:

https://brainly.com/question/12474790


How many dozens of doughnuts are in 48 doughnuts

Answers

Final answer:

There are 4 dozens in 48 doughnuts, as a dozen is a group of 12 objects. This quantity would require four boxes with a volume of 324 cubic inches each to hold all the doughnuts.

Explanation:

To find out how many dozens of doughnuts are in 48 doughnuts, we can simply divide the total number of doughnuts by the number in a dozen. Since a dozen refers to 12 objects, we divide 48 by 12.

48 ÷ 12 = 4

Therefore, there are 4 dozens in 48 doughnuts. When buying items like doughnuts, it is common to acquire them in groups, like a dozen, because it is more convenient and efficient.

Let's consider the dimensional aspect for a moment. If you have a 9x9x4 inch box for a dozen doughnuts, this box would have a volume of 324 cubic inches. For 48 doughnuts, which we have established are 4 dozens, we would need four of these boxes, equating to 4 × 324 in3 or 1296 in3 in total to hold all of them.

The pressure on a 200 milliliter sample of CO2 (g) at constant temperature is increased from
600 mmHg to 1200 mmHg. What is the new volume?
(1 Point)
100 mL
300 mL
400 ml
600 mL

Answers

The answer for the following problem is mentioned below.

Therefore the final volume of the gas is 100 ml.

Explanation:

 Given:

Initial pressure ([tex]P_{1}[/tex]) = 600 mm of Hg

Final pressure ([tex]P_{2}[/tex]) = 1200 mm of Hg

Initial volume ([tex]V_{1}[/tex]) = 200 ml      

To find:

Final volume ([tex]V_{2}[/tex])

We know;

According to the ideal gas equation,

    P × V = n × R × T

Where;

P represents the pressure of the gas

V represents the volume of the gas

n represents the no of moles of the gas

R represents the universal gas constant

T represents the temperature of the gas

So,

 From the above mentioned equation,

        P × V = constant

[tex]\frac{P_{1} }{P_{2} }[/tex] = [tex]\frac{V_{1} }{V_{2} }[/tex]

Where,

([tex]P_{1}[/tex]) represents the initial pressure of the gas

([tex]P_{2}[/tex]) represents the final pressure of the gas

([tex]V_{1}[/tex])  represents the initial volume of the gas

([tex]V_{2}[/tex])  represents the final volume of the gas

So;

[tex]\frac{600}{1200}[/tex] = [tex]\frac{V_{2} }{200}[/tex]    

[tex]V_{2}[/tex] = 100 ml

Therefore the final volume of the gas is 100 ml.                                                                                                                                                                              

Final answer:

Using Boyle's Law, which states that the product of pressure and volume for a gas is constant at a fixed temperature, it is calculated that the new volume of the CO2 (g) sample when the pressure is doubled to 1200 mmHg at constant temperature is 100 mL.

Explanation:

The question asks about the change in volume of a gas sample when the pressure is increased while keeping the temperature constant. This scenario is described by Boyle's Law, which states that for a given mass of gas at constant temperature, the volume of the gas varies inversely with the pressure. The initial condition for the CO2 (g) is 200 mL at 600 mmHg, and after the pressure is increased to 1200 mmHg, we want to find the new volume.

Boyle's Law can be expressed as P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume, respectively. Using this relationship, when P1 = 600 mmHg, V1 = 200 mL, P2 = 1200 mmHg, we need to solve for V2. When we plug these values into the equation, we get V2 = (P1 * V1) / P2 = (600 mmHg * 200 mL) / 1200 mmHg = 100 mL.

Therefore, the new volume of the CO2 (g) sample when the pressure is increased to 1200 mmHg at constant temperature is 100 mL.

Assuming that there is a constant partial pressure for oxygen, according to Le Châtelier’s Principle which of the following occurs when body temperature decreases during hypothermia?

Answers

Answer:

B. The amount of oxygen will decreases

Explanation:

According to Le Châtelier’s Principle, when the condition of the system changes the equilibrium will shift to compensate for the changes. When temperature decrease, the pressure will also decrease and this will shift the equilibrium to the side with exothermic reaction or less molecule count.

The question is not giving the equilibrium reaction of oxygen, so I assume its

O2 + Hb = HbO2

Since the number of molecules in the right side is lower, then the number of oxygen will decrease since the reaction will shift to the right.

Of the reactions below, which one is not a combination reaction?Immersive Reader (2 Points) 2N2 + 3H2 → 2NH3 2Mg + O2 → 2MgO 2CH4 + 4O2 → 2CO2 + 4H2O C + O2 → CO2 CaO + H2O → Ca(OH)2

Answers

Answer: [tex]2CH_4+4H_2O\rightarrow 2CO_2+4H_2O[/tex] is not a combination reaction.

Explanation:

Synthesis reaction or combination reaction is defined as the reaction where two or more substances combine to form a single product.

[tex]2N_2+3H_2\rightarrow 2NH_3[/tex]

[tex]2Mg+O_2\rightarrow 2MgO[/tex]

[tex]CaO+H_2O\rightarrow Ca(OH)_2[/tex]

Combustion is a chemical reaction in which hydrocarbons are burnt in the presence of oxygen to give carbon dioxide and water.

[tex]2CH_4+4H_2O\rightarrow 2CO_2+4H_2O[/tex]

Final answer:

Among the provided reactions, the reaction 2CH4 + 4O2 → 2CO2 + 4H2O is not a combination reaction, but rather a combustion reaction.

Explanation:

In the given reactions, the reaction 2CH4 + 4O2 → 2CO2 + 4H2O is not a combination reaction. In a combination reaction, two or more substances (either elements or compounds) combine to form a single compound. However, the mentioned reaction is actually an example of a combustion reaction where methane (CH4) undergoes combustion in the presence of oxygen (O2) to form carbon dioxide (CO2) and water (H2O).

Learn more about Combination Reaction here:

https://brainly.com/question/35893820

#SPJ3

14.2 grams of Na2 so4 is dissolved in water to make a 2.50 L solution.What is molarity of solution?

Answers

Answer:

The answer to your question is 0.04 M

Explanation:

Data

mass of Na₂SO₄ = 14.2 g

volume = 2.50 l

Molarity = ?

Process

1.- Calculate the molar mass of Na₂SO₄

Na₂SO₄ = (23 x 2) + (32 x 1) + (16 x 4) = 46 + 32 + 64 = 142 g

2.- Calculate the number of moles of Na₂SO₄

                    142 g of Na₂SO₄ ------------------- 1 mol

                     14.2 g of Na₂SO₄ ------------------  x

                                   x = (14.2 x 1) / 142

                                   x = 0.1 moles

3.- Calculate the molarity

Molarity = moles /volume

-Substitution

Molarity = 0.1 / 2.5

-Result

Molarity = 0.04

__________ is a numerical value assigned to each element to indicate the number of electrons that might be lost, gained, or shared by an atom of that element when it bonds with an ion or an atom of another element to form a compound.

Answers

Answer:

oxidation number

Explanation:

Describes the degree of oxidation of an atom in a chemical compound.

what was the purpose of running a tlc of ferrocene, the acetylferrocene product mixture, and co-spot (an overlay of ferrocene and the product mixture) prior to conducting the column chromatography portion of the experiment?a. All of the belowb. To determine the elution in a chromatography column of the starting material and productsc. To determine if there was starting material still present in the reactiond. To identify the number of products of the reaction

Answers

Answer:

a. All of the below

Explanation:

Column chromatography in chemistry is a chromatography method used to isolate a single chemical compound from a mixture.

TLC can be used to analyze a chemical reaction to determine if the reactants have been consumed and a new product has formed. Running a tlc of ferrocene, the acetylferrocene product mixture, and co-spot, when you view the TLC plate under a UV light, you will notice that acetylferrocene product is on the right-most lane, this shows that the reaction appears to be a success: the higher spot of ferrocene has been consumed), and a new product spot is present. From these we can observe that the we can use this to identify the number of products of the reaction, determine if the starting material is still present in the reaction and the elution in a chromatography column of the starting material and products. Therefore, all the choices are correct.

How much heat is required to vaporize a 3 g ice cube initially at 0◦C? The latent heat of fusion of ice is 80 cal/g and the latent heat of vaporization of water is 540 cal/g. The specific heat of water is 1 cal/(g · ◦ C). Answer in units of cal.

Answers

Answer : The amount of heat required is, 2160 cal.

Explanation :

The process involved in this problem are :

[tex](1):H_2O(s)(0^oC)\rightarrow H_2O(l)(0^oC)\\\\(2):H_2O(l)(0^oC)\rightarrow H_2O(l)(100^oC)\\\\(3):H_2O(l)(100^oC)\rightarrow H_2O(g)(100^oC)[/tex]

The expression used will be:

[tex]Q=[m\times \Delta H_{fusion}]+[m\times c_{p,l}\times (T_{final}-T_{initial})]+[m\times \Delta H_{vap}][/tex]

where,

[tex]Q[/tex] = heat required for the reaction = ?

m = mass of ice = 3 g

[tex]c_{p,l}[/tex] = specific heat of liquid water = [tex]1cal/g^oC[/tex]

[tex]\Delta H_{fusion}[/tex] = enthalpy change for fusion = [tex]80cal/g[/tex]

[tex]\Delta H_{vap}[/tex] = enthalpy change for vaporization = [tex]540cal/g[/tex]

Now put all the given values in the above expression, we get:

[tex]Q=[3g\times 80cal/g]+[3g\times 1cal/g^oC\times (100-0)^oC]+[3g\times 540cal/g][/tex]

[tex]Q=2160cal[/tex]

Therefore, the amount of heat required is, 2160 cal.

Final answer:

To vaporize a 3 g ice cube initially at 0°C, a total heat of 2160 cal is required. This includes the heat required to melt the ice, heat the melted ice to water's boiling point, and vaporize the water.

Explanation:

The process to vaporize a 3 g ice cube at 0°C consists of three steps. First, the ice cube needs to melt. This requires an amount of heat given by Q = mass x latent heat of fusion. i.e., Q = 3 g x 80 cal/g = 240 cal.`

Then, the water obtained from melted ice at 0°C needs to be heated up to 100°C. The required heat is Q = mass x specific heat x ΔT, i.e., Q = 3 g x 1 cal/g°C x (100°C-0°C) = 300 cal.

Finally, the 100°C water needs to be vaporized. This requires an amount of heat given by Q = mass x latent heat of vaporization. i.e., Q = 3 g x 540 cal/g = 1620 cal.

So, the total heat required to vaporize a 3 g ice cube initially at 0°C is 240 cal + 300 cal + 1620 cal = 2160 cal.

Learn more about Heat Calculation here:

https://brainly.com/question/30320641

#SPJ11

In photosynthesis, carbon dioxide and water are converted into glucose and oxygen in the presence of chlorophyll and light energy. If 1.0 mole of water is available with an excess of carbon dioxide, how many moles of glucose (C6H12O6) can be produced

Answers

Answer:

0.17 mole of glucose is formed.

Explanation:

Step 1:

The equation for the reaction. This is given below:

CO2 + H2O —> C6H12O6 + O2

Step 2:

Balancing the equation.

The equation can be balanced as follow:

CO2 + H2O —> C6H12O6 + O2

There are 6 atoms of C on the right side and 1 atom on the left side. It can be balance by putting 6 in front of CO2 as shown below:

6CO2 + H2O —> C6H12O6 + O2

Therefore are 12 atoms of H on the right side and 2 atoms on the left side. It can be balance by putting 6 in front of H2O as shown below:

6CO2 + 6H2O —> C6H12O6 + O2

There are a total of 8 atoms of O the right side and a total of 18 atoms on the left. It can be balance by putting 6 in front of O2 as shown below:

6CO2 + 6H2O —> C6H12O6 + 6O2

Now the equation is balanced.

Step 3:

Determination of the number of mole of glucose (C6H12O6) produced by 1 mole of water.

This is illustrated below:

6CO2 + 6H2O —> C6H12O6 + 6O2

From the balanced equation above,

6 moles of H2O produced 1 mole of C6H12O6.

Therefore, 1 mole of H2O will produce = 1/6 = 0.17 mole of C6H12O6.

Answer:

IF 1.0 mol of water is available, 0.167 moles of glucose (C6H12O6) will be produced

Explanation:

Step 1: Data given

Number of moles of water = 1.0 moles

Carbon dioxide is in excess

Step 2: The balanced equation

6CO2 + 6H2O → C6H12O6 + 6O2

Step 3: Calculate moles of glucose

For 6 moles CO2 we need 6 moles H2O to produce 1 mol glucose and 6 moles O2

For 1.0 moles of water we'll have 1.00 / 6 = 0.167 moles of glucose

IF 1.0 mol of water is available, 0.167 moles of glucose (C6H12O6) will be produced

It is common for students to overshoot the endpoint, meaning they add too much NaOH(aq) from the buret, which causes the solution to turn bright pink. What specific impact does this mistake have on the percent of acetic acid result?

Answers

Answer: the percentage of acetic acid will be low.

Explanation: The major aim during titration of acids and bases is to  determine the endpoint , that is exact point where the acid  in the beaker changes colour, (in this case, pink )with an additional  drop from the burette containing the base, since it is usually difficult to mark the equivalence point that tells us when  all the substrate in the beaker has been neutralized completely with the buretted substance.

Overshooting the end point is  an error which can occur when the person involved in the  the titration accidently goes beyond this  endpoint by adding too much of the substance(base) from the burette into the beaker missing the exact endpoint.

This implies that the person  has  added too much of the burreted liquid, ie the base than required  , making the acid in the beaker to continue to react resulting  to a lower concentration of the acid (acetic acid)  with excess base.(NaOH)

A container holds 20.4 L of CO2 at 1.58 atm, what is the volume at STP?


Answers

Answer:

32.232 L

Explanation:

-Given the volume at 1.58atm is 20.4 L

-At standard pressure, the pressure is 1.00atm

-We apply Charle's Law to find the volume at STP:

[tex]P_1V_1=P_2V_2\\\\\\1.58\ atm\times 20.4\ L=1.00\ atm\times V_2\\\\V_2=\frac{1.58\times 20.4}{1.00}\\\\\\\\=32.232\ L[/tex]

Hence, the volume of the gas at STP is 32.232 L

When the system is at equilibrium, it contains NO 2 at a pressure of 0.817 atm , and N 2 O 4 at a pressure of 0.0667 atm . The volume of the container is then reduced to half its original volume. What is the pressure of each gas after equilibrium is reestablished

Answers

Final answer:

When the system is at equilibrium with specific initial pressures and the volume of the container is reduced by half, the pressure of each gas changes accordingly.The pressure of NO₂ will be 1.634 atm, and the pressure of N₂O₄ will be 0.1334 atm.

Explanation:

When the system is at equilibrium, it contains NO₂at a pressure of 0.817 atm, and N₂O₄ at a pressure of 0.0667 atm. If the volume of the container is reduced to half its original volume, the pressure of each gas will change.

According to the ideal gas law, the pressure of each gas will double when the volume is reduced by half. So, after re-establishing equilibrium, the pressure of NO₂ will be 1.634 atm, and the pressure of N₂O₄ will be 0.1334 atm.

A balloon is filled to a volume of 600 mL at a temperature of 20°C . The balloon is been called to a temperature of 100 K. What is the final volume of the balloon

Answers

Answer:

204.78 mL

Explanation:

- use Charle's law and rearrange formula

- change C to K

- Hope this helped! Let me know if you need further explanation.

Name this compound please​

Answers

Answer:

The answer to your question is butanal

Explanation:

To name this compound we must consider:

1.- Identify the functional group. The functional group of this molecule is the first carbon to the right and its oxygen.

When carbon is attached to oxygen is a border, this functional group is called Aldehyde.

2.- Count the total number of carbons starting from the right. This molecule has 4 carbons.

3.- Name the compound

    An organic molecule with 4 carbons is called butane but change the ending for al, then the name will be butanal

what equation represents a chemical equilibrium?

Answers

The equation which represents the chemical equilibrium is  2 NO₂ ⇄ N₂0₄

Explanation:

The equation which represents the chemical equilibrium is

           2 NO₂ ⇄ N₂0₄.

A chemical reaction is in equilibrium at the combinations of reactants and products are even  and their ratio does not change In other words, the equilibrium can be defined as the system is in equilibrium when the forward and backwards reactions happen at regular rates.The idea of chemical equilibrium was formed after Berthollet found that some chemical reactions are reversible.

Test your knowledge of water's ability to dissolve
substances by matching the following statements
with the correct answers.
when water breaks apart an ionic compound into
cations and anions.
when water surrounds substances that have been
"broken apart":
when water breaks down substances and
surrounds individual molecules or particles:

Answers

Answer: 1 dissociation. 2. Hydration. 3. Dissolving.

Explanation:

What type of reaction occurs between amines and carboxylic acids at room temperature?

Answers

Answer:

Acid-base equilibrium.

Explanation:

At low temperatures the amines react with carboxylic acids as bases and not as nucleophiles. This acid-base reaction is disadvantageous on heating, with the nucleophilic attack that will form the amide prevailing under these conditions.

A student went to the dentist and found out that he had a cavity. He always brushes his teeth twice a day, so he didn't understand how he got a cavity. The dentist told him that drinking things every day that are acidic, such as lemonade, can contribute to cavities. He didn't drink lemonade but does drink a variety of other drinks.



The next day he brought in a sample of each drink and asked his science teacher to borrow a pH probe to test each liquid. The pH of Drink A is 11.9, Drink B is 7.0, Drink C is 5.3, Drink D is 9.8, Drink E is 2.4. Explain which drink(s) the student should avoid if he wants to protect his teeth from further damage.



In your response, be sure to include:

1. an explanation of what pH measures

2. which drinks are acidic, basic, and neutral.

Answers

Answer:E is an acidic

Explanation:

Soo he should avoid the drink E and in pH measurement the more acidic is below 7 and the the more alkali is above 7 and the neutral drink is B and it may a water ...

Other Questions
on the first day of every month Katie gets 450 phones she repairs 10 phones every day how many phones does she have left to repair at the end of the 11 day of the month Many economists believe that the market for wheat in the United States is an almost perfectly competitive market. If one firm discovers a technology that makes its wheat taste better and have fewer calories than all other wheat offered in the market, the wheat market would become less competitive becausea. there would no longer be many buyers and many sellers of wheat.b. it would no longer be easy to enter and exit the existing wheat market.c. the products would no longer be similar in the wheat market.d. the government would want to intervene.e. individuals would not want to switch products. Which organism would be classified as an introduced species?A.an organism that occurred naturally in an areaB. An organism that evolved recently C. An organism that was bright to an area by humans many centuries agoD. An organism that used to be endangered but whose numbers recently increased When you are asked a multiple-choice question, eliminate options that are obviously incorrect, and then eliminate options that contain absolute terms such as "all" or "every." These rules of thumb are known as _____. They don't guarantee a correct answer, but they are likely to help you get to the correct choice. Which writer of the Middle Ages was especially influenced by Virgil?A. DanteB. MichelangeloC. RaphaelD. ShakespearePlease answer now! Crane Company uses the LCNRV method, on an individual-item basis, in pricing its inventory items. The inventory at December 31, 2020, consists of products D, E, F, G, H, and I. Relevant per unit data for these products appear below. Item D Item E Item F Item G Item H Item I Estimated selling price $122$112$97$92$112$92 Cost 778282825137 Cost to complete 313126363131 Selling costs 101810201020 Using the LCNRV rule, determine the proper unit value for balance sheet reporting purposes at December 31, 2020, for each of the inventory items above. Members of the Deinococcus genus present an interesting conundrum to scientists who try to classify them as either gram-positive or gram-negative. Deinococcus has a thick layer of peptidoglycan and also an outer membrane. Explain why these features complicate its classification How many solutions does 5-2x=3+x-4-3x have? In one of the cases in the textbook, Larry Gunter was a shipping clerk for a computer company that manufactured microprocessor chips. After learning that the chips were valuable, he stole three boxes and sold them to his girlfriend's father. Since the scheme worked so well the first time, he continued stealing and selling the chips, even letting a co-worker in on the scheme. How was the theft discovered The capital of the Umayyad Caliphate was located in A horizontal wooden beam sags a bit when supported at its ends. In between the top and bottom surfaces is a region of (08.05)Some students reported how many textbooks they have. The dot plot shows the data collected:Students' Textbooks2 3 4 5 6Number of TextbooksWhat do the dots above the number 6 indicate?AThere are exactly 6 students with 4 textbooks BThere are exactly 4 students with 6 textbooks CThere are exactly 6 students with less than 4 textbooks DThere are exactly 4 students with less than 6 textbooks (PLEASE NO GUESSING):) What might happen if pasteurization did not kill the enzymes that exist in milk?A Fresh milk might make people sick incorrect answerB Milk couldn't be made into butter, cheese, or ice cream incorrect answerC Only frozen milk could be sold in stores incorrect answerD Milk would have a shorter shelf life Assume that it is now November 30th, your client has an Accounts Receivable balance of $4,500 and an Allowance for Uncollectible Accounts balance of $75 (assume the normal balance for both accounts). November Sales totaled $15,000. The estimate for the uncollectible amount is based on November Sales, and the estimate is $450. What would be the allowance transaction AMOUNT? Assign oxidation states to all of the species in the following redox reaction. For the reactants, identify electron loss or gain, the species oxidized, the species reduced, the oxidizing agent and the reducing agent. Co(s) + F2(g) Co2+(aq) + 2F-(aq) Oxidation state Electron loss or gain Oxidized or reduced Reducing or oxidizing agent Given f(x) and g(x) = f(x + k), use the graph to determine the value of k. Two lines labeled f of x and g of x. Line f of x passes through points negative 4, 0 and negative 2, 2. Line g of x passes through points negative 10, 0 and negative 8, 2. Based on what you have learned about Malalas viewpoints and setting, why is a blog a good way for Malala to speak up? Write two to four sentences explaining your answer. Finch Painting Company is considering whether to purchase a new spray paint machine that costs $2,000. The machine is expected to save labor, increasing net income by $300 per year. The effective life of the machine is 15 years according to the manufacturers estimate. Required Determine the unadjusted rate of return based on the average cost of the investment which eukaryotic cell is filled with a solution of water and nutrients called_________ inside of which is sort of scaffolding called the_______ Partial charges will exist on each atom when a bond exists between two atoms with different electronegativities. Since the atom with a higher electronegativity will have a stronger ability to attract electrons, it will have a partial _________ charge. The atom with a lower electronegativity will have an equal and opposite _________ charge. As the difference in electronegativity increases, the resulting magnitudes of the partial charges will ___________.