A printer is connected to a 1.0 m cable. if the magnetic force is 9.1 × x10-5 n, and the magnetic field is 1.3 × 10-4 t, what is the current in the cable

Answers

Answer 1

The magnetic force on a current-carrying wire due to a magnetic field is given by
[tex]F=ILB[/tex]
where
I is the current
L the wire length
B the magnetic field strength

In our problem, L=1.0 m, [tex]F=9.1 \cdot 10^{-5} N[/tex] and [tex]B=1.3 \cdot 10^{-4}T[/tex], so we can re-arrange the formula to find the current in the wire:
[tex]I= \frac{F}{LB}= \frac{9.1 \cdot 10^{-5} N}{(1.0 m)(1.3 \cdot 10^{-4} T)} =0.7 A [/tex]

Related Questions

What real-world examples show no work begin done? Can you think of examples other than resisting the force of gravity?

Answers

Oh my gosh ! Resisting the force of gravity always DOES involve doing work.
If no work is being done, then you're NOT resisting the force of gravity.

Example:

-- ball rolling on the floor . . . no work
-- ball rolling up a ramp . . . work being done
-- ball rolling down a ramp . . . work being done, BY gravity

Answer:

Explanation:

The work done is defined as the product of force in the direction of displacement and the displacement.

Work done = force x displacement x Cos Ф

Where, Ф be the angle between force and the displacement vectors.

Work may be positive, negative or zero depending on the values of angle Ф.

The work done is zero when force is zero or displacement is zero or angle Ф is 90 degree.

So, when we apply a force on a body and body does not displace, then the work done is zero.

What are three benefits of being assertive and what are three tips to help you develop an assertive style of communication? (Site 1)

Answers

1. The benefits of been assertive include the following:
a. It improve one self image: When you choose to be assertive, you adopt a self realistic image.
b. It enhance how we understand others: Been assertive helps you to see others in a more realistic context.
c. Promote self awareness and self confidence: Been assertive helps you to develop a greater respect for your own points of view when dealing with issues.
d. Been assertive is a less stressful way of communicating.

2. The three steps needed to develop assertive communication, include:
a. Learn to 'no' more often: refuse to please everyone and do not behave according to people expectations of you. Be yourself.
b. Your tone must be properly turned when talking: Do not raise your voice or rush a communication. Be calm and cool when talking.
c. Be open to communication: Be willing to discuss issues until a suitable solution is found.
d. Pay attention to non-verbal communication of others: Keep eye contact when communicating and pay attention to other body gestures.

You use energy to heat your home. what ultimately happens to the energy that you pay for in your heating bill?

Answers

The heat energy that you pay for in your heating bill releases and goes to the atmosphere.

Where heat energy goes?

The heat energy that are used for warming of houses is releases and goes to the atmosphere and become a part of that atmosphere.

So we can conclude that the heat energy that you pay for in your heating bill releases and goes to the atmosphere.

Learn more about heat here: https://brainly.com/question/13439286

Energy paid for in your heating bill is converted into thermal energy to heat your home, distributing through power lines or pipelines. Some of the energy is lost to the environment, while the rest maintains a warm home temperature. Continuous payment is necessary to compensate for ongoing heat loss.

When you pay for energy to heat your home, you are essentially purchasing thermal energy to maintain a comfortable temperature inside. Here's a step-by-step explanation of what happens to the energy:

Generation: The energy you pay for is generated by power plants, which may use fossil fuels, nuclear energy, or renewable sources. This energy is then converted into electrical or thermal energy.Distribution: This energy is distributed through power lines or pipelines to your home.Use in Heating: Inside your home, energy is converted by your heating system into thermal energy (heat). This heat is then transferred to the air and materials in your home to maintain a warm temperature.Heat Transfer: Some of this thermal energy is inevitably lost to the outside environment due to heat transfer. The remaining energy stays within your home, ensuring a comfortable living space.Energy Dissipation: Over time, the thermal energy dissipates, balancing out with the environmental temperature unless continuously supplied.

This process explains why you continuously pay for heating during colder months – it compensates for the continuous loss of heat to the outside environment.

A certain part of the electromagnetic spectrum ranges from 200 nm to 400 nm. what is the highest frequency associated with this portion of the spectrum? (c = 3.00 × 108 m/s)

Answers

The lowest and highest wavelengths of this part of the electromagnetic spectrum are:
[tex]\lambda_1 = 200 nm=200 \cdot 10^{-9} m[/tex]
[tex]\lambda_2 = 400 nm=400 \cdot 10^{-9} m[/tex]

The frequency and the wavelenght of an electromagnetic wave are related by
[tex]f= \frac{c}{\lambda} [/tex]
where c is the speed of light and f the frequency. By using this equation, we can find the frequencies that corresponds to the lowest and highest wavelengths of this part of the spectrum:
[tex]f_1 = \frac{c}{\lambda_1}= \frac{3 \cdot 10^8 m/s}{200 \cdot 10^{-9} m}=1.5 \cdot 10^{15}Hz [/tex]
[tex]f_2 = \frac{c}{\lambda_2}= \frac{3 \cdot 10^8 m/s}{400 \cdot 10^{-9} m}=7.5 \cdot 10^{14}Hz [/tex]

So, the highest frequency associated with this part of the spectrum is the one corresponding to the lowest wavelength:
[tex]f_1 = 1.5 \cdot 10^{15}Hz[/tex]

Final answer:

The highest frequency associated with the portion of the electromagnetic spectrum ranging from 200 nm to 400 nm is 7.50 × 10^14 Hz.

Explanation:

The highest frequency associated with the portion of the electromagnetic spectrum ranging from 200 nm to 400 nm can be determined using the formula c = fλ, where c is the speed of light. In this case, the wavelength is given as 200 nm to 400 nm. Converting the wavelength to meters, we find that it corresponds to 2.00 × 10-7 m to 4.00 × 10-7 m. Using the formula, we can rearrange it to solve for the frequency, f = c/λ. Plugging in the values, we get the highest frequency as 7.50 × 1014 Hz.

Learn more about Electromagnetic Spectrum here:

https://brainly.com/question/23727978

#SPJ3

Bats can detect small objects such as insects that are of a size on the order of a wavelength. if bats emit a chirp at a frequency of 69.3 khz and the speed of sound waves in air is 330 m/s, what is the smallest size insect they can detect? give your answer in mm (millimeters)

Answers

The smallest size of the insect that the bats can detect corresponds to the wavelength of the chirp they emit.

Their chirp has a frequency of
[tex]f=69.3 kHz=69.3 \cdot 10^3 Hz[/tex]
and the speed of the chirp is equal to the speed of sound in air:
[tex]v=330 m/s[/tex]
Therefore the wavelength of the chirp is
[tex]\lambda= \frac{v}{f}= \frac{330 m/s}{69.3 \cdot 10^3 Hz}=4.76 \cdot 10^{-3} m [/tex]
which corresponds to a size of 4.76 mm.

How does natural selection result in adaptations in a species

Answers

An organism's "fitness" is measured by its ability to live long enough to reproduce and pass down traits to their offspring. In sexually reproducing organisms, those who are most fit are most likely to survive often have a specialized trait that gave them the advantage in doing so. The organism with the traits that allowed them to survive and reproduce passes the trait to it's offspring. Assuming that the environment doesn't overly change, those offspring have a greater chance to survive and reproduce themselves. Thus, this trait becomes a specialized adaption for the environment and allows the species as a whole to survive longer.

A hot-air balloon plus cargo has a mass of 326 kg and a volume of 2310 m3 on a day when the outside air density is 1.22 kg/m3. the balloon is floating at a constant height of 9.14 m above the ground.

Answers

Missing question: "what is the density of the hot air?"

Solution:

The balloon is floating at constant height, and this means that the two forces acting on it (the weight and the buoyant force) are in equilibrium:
[tex]W=B[/tex]
where W is the weight of the balloon, which is sum of the weight of the balloon structure and of the hot air inside the balloon, and B is the buoyant force.

The buoyant force is given by:
[tex]B=Vd_ag[/tex]
where V is the volume of the balloon, d is the air density and g is the gravitational acceleration. Plugging numbers into the equation, we find
[tex]B=Vd_ag=(2310 m^3)(1.22 kg/m^3)(9.81 m/s^2)=2.76 \cdot 10^4 N[/tex]

This is equal to the weight of the balloon+hot air inside it:
[tex]2.76 \cdot 10^4 N = W = W_b + W_h[/tex]
where
[tex]W_b[/tex] is the weight of the balloon
[tex]W_h[/tex] is the weight of the hot air inside the balloon

The weight of the balloon is
[tex]W_b = mg = (326 kg)(9.81 m/s^2)=3199 N[/tex]

Which means that the weight of the hot air is
[tex]W_h = W-W_b = 2.76 \cdot 10^4 N - 3199 N =2.44 \cdot 10^4 N[/tex]
which corresponds to a mass of
[tex]m_h = \frac{W_h}{g}= \frac{2.44 \cdot 10^4 N}{9.81 m/s^2}=2487 kg [/tex]

And since the mass is the product between density and volume, we can find the density of the hot air:
[tex]d_h = \frac{m_h}{V}= \frac{2487 kg}{2310 m^3}=1.08 kg/m^3 [/tex]

Two small objects each with a net charge of +q exert a force of magnitude f on each other: we replace one of the objects with another whose net charge is +4q: the original magnitude of the force on the +q charge was f; what is the magnitude of the force on the +q charge now?

Answers

The force between 2 charged objects is given by, F = kq1q2/d².
where k ⇒ constant
d ⇒ distant between the 2 objects.

In this case, k and d are constants.
So, let k/d² = x
since q1=q2,
F = xq²
x = F/q²
After replacing q1 with 4q, the new force on +q will be:

F = xq.4q
= Fq4q/q²
= 4F

The new charge on +q is 4F.

When ultraviolet light with a wavelength of 400 nm falls on a certain metal surface, the maximum kinetic energy of the emitted photoelectrons is measured to be 1.10 ev . part a what is the maximum kinetic energy of the photoelectrons when light of wavelength 295 nm falls on the same surface? emax =?

Answers

A general relationship between Kinetic Energy (KE) and wavelength (y) is that KE is inversely proportional to square of y. That is,

KE α 1/y^2 => KE = k/y^2 where k is a constant of proportionality.

For KE = 1.10 ev, and y = 400 nm;

k = KE*y^2 = 1.10*400 = 176,000 ev.nm^2

For y = 295 nm,

KE = k/y^2 = 176,000/295^2 = 2.02 ev.

Therefore, e max = 2.02 ev

If you live in Earth's Northern Hemisphere, you expect the length of days to change from short in the winter to longest around the summer solstice, June 21st. This is because?

Answers

The actualy day lentghts Do not change, however the amount of light in a given will get longer towards summer due to the more sun that there is on that side of earth and the earth tilts more that way vertically, hence also the reason for increased heat in summer. Hope I helped! :D brainliest?

the guy on the up is jason todd

hope this helps:)

The range of audible frequencies is from about 20.0 hz to 2.00×104 hz . what is range of the wavelengths of audible sound in air? the speed of sound in air is 344 m/s.

Answers

The wavelength is related to the frequency by the relationship:
[tex]\lambda= \frac{v}{f} [/tex]
where v is the wave speed and f is its frequency.

The speed of sound in air is v=344 m/s. The lowest frequency is f=20.0 Hz, so the corresponding wavelength is
[tex]\lambda_1 = \frac{v}{f_1}= \frac{344 m/s}{20.0 Hz}=17.2 m [/tex]
The highest frequency is [tex]f_2 = 2.00 \cdot 10^4 Hz[/tex], so the corresponding wavelength is
[tex]\lambda_2 = \frac{v}{f_2}= \frac{344 m/s}{2.00 \cdot 10^4 Hz}=0.017 m [/tex]

Therefore, the range of wavelengths of audible sound in air is
[0.017 m - 17.2 m]

In Figure 18.8 the grounding wire is removed first, followed by the rod, and the sphere is left with a positive charge. If the rod were removed first, followed by the grounding wire, would the sphere be left with a charge? Account for your answer.

Answers

In Figure 18.9, the ground wire is first removed, then the rod. This leaves a positive charge on the sphere. If you remove the rod first and then remove the ground wire, there will be no charge left on the sphere. When the rod is removed, the repulsive force caused by the presence of the rubber rod no longer exists. As the wire is still attached, free electrons enter the sphere from the ground until the sphere is neutral again.

Final answer:

If the charged rod is removed before the grounding wire, the sphere will not retain a net charge because any excess charge will flow back to ground. Only if the grounding wire is removed while the rod is still present does the sphere retain an excess charge.

Explanation:

If the grounding wire is removed after the charged rod is taken away, the sphere would be left with no net charge. This is because during the process of charging by induction, if the rod is removed first, any excess charge on the sphere would have the opportunity to redistribute evenly across its surface. Since the sphere was initially neutral and the grounding wire is still connected, the excess charge would flow to the ground, effectively bringing the sphere back to a neutral state.

On the other hand, as described in your references, if the grounding wire is removed first while the charged rod is still present, the sphere retains an excess of electrons. This happens because by breaking the ground connection while the sphere is still influenced by the nearby positive charge of the rod (which repels the electrons), the redistributed electrons are trapped on the sphere, thus leaving the sphere negatively charged. When the positive rod is finally removed, the sphere remains negatively charged because the extra electrons have no path to escape.

Explain how your battery works. What are some possible materials you could use to make your battery?

Answers

A battery is made up of three parts. The Cathode (positive end +) , the Anode (negative end -) and the electrolyte. The electrolyte allows electrical charges to travel between the cathode and anode. This chemical reactions creates the flow of electricity supplying the electrical voltage potential to power a circuit.

Typical materials of a battery are as follows
- Anode most often is made of zinc
- Manganese dioxide acting as Cathode.
- the electrolyte between and inside contains ions

When a rocket is traveling toward a mountain at 100 m/s, the sound waves from this rocket's engine approach the mountain at speed v. if the rocket doubles its speed to 200 m/s, the sound waves from the engine will now approach the mountain at speed?

Answers

The sound will approach the mountain at the same speed, v, irrespective of the speed of the rocket. This is because sound will always travel at the same speed as long as properties of air remain the same.
Therefore, sound will approach the mountain at velocity v in both 100 m/s and 200 m/s of the rocket.

Answer:

The sound waves from the engine will approach the mountains at the same speed, no matter if the speed of the rocket is 100m/s or 200 m/s.

Explanation:

The sound wave is a property of the air, which means that the speed of the object producing sound does not matter to the sound of the waves, that is, they are always going to be the same.

So the sound waves from the engine will approach the mountains at the same speed, no matter if the speed of the rocket is 100m/s or 200 m/s.

A cyclist is going in the positive x-direction at 9m/s. A car initially at rest, accelerates for the first 10 seconds, then it goes with a constant velocity. If the car reaches the cyclist after 15 seconds from the moment the car started moving, find: (a) The acceleration of the car during the first 10 seconds, (b) The velocity of the cyclist with respect to the car when the car reaches the cyclist

Answers

1) The car is initially at rest, and it accelerates for the first 10 seconds with acceleration a, so the distance it covers in these first 10 seconds is (in meters)
[tex]d_1 = \frac{1}{2}at^2 = \frac{1}{2}a(10 s)^2 = 50 a [/tex]
The velocity the car has reached after these 10 seconds is
[tex]v=at = a (10 s)=10 a[/tex] (3)
Then the car moves for other 5 seconds with this constant velocity (v=10 a) before reaching the cyclist. During this time, the distance it covers is
[tex]d_2 = v t = 10 a \cdot (5 s) =50 a[/tex]
So the total distance covered by the car is
[tex]d=d_1 + d_2 = 50 a + 50 a =100 a[/tex] (1)

The cyclist is moving at constant speed of [tex]v=9m/s[/tex], so the distance it covered during the 15 seconds is
[tex]d=vt=(9m/s)(15 s)=135 m[/tex] (2)

And since the car covered the same distance during this time, we can use (1) and (2) to find the acceleration of the car during the first 10 seconds:
[tex]a= \frac{d}{100}= \frac{135}{100} = 1.35 m/s^2 [/tex]

2) The velocity of the car when it reaches the cyclist is given by (3):
[tex]v_1= 10 a= (10 s)(1.35 m/s^2) = 13.5 m/s[/tex]
The velocity of the cyclist is [tex]v_2 = 9m/s[/tex], therefore the velocity of the car relative to the cyclist is
[tex]v' = v_1 - v_2 = 13.5 m/s - 9m/s=4.5 m/s[/tex]

What can you infer from the fact that although CFC's have been banned, refrigerators and aerosol cans are still being sold?

Answers

It would be "Researchers found environmental safe replacements for CFC's"

Researcher must have found environmentally safer replacements for CFCs. That might be the reason aerosol cans and the refrigerators are still being sold. In aerosol cans liquefied petroleum gas is being popularly used in place of dangerous CFCs. Same is being done in refrigerators and other devices. The aerosol cans no longer hurt the ozone layer. Infact they have reduced the waste as they can be recycled now and has long life.

When a pendulum with a period of 2.00000 s in one location (g = 9.80 m/s2) is moved to a new location from one where the period is now 1.99863 s. what is the change in acceleration (in m/s2) due to gravity at its new location?

Answers

The period of a pendulum is given by:
[tex]T=2 \pi \sqrt{ \frac{L}{g} } [/tex]
where L is the pendulum length and g is the gravitational acceleration.

Initially, the period of the pendulum is T=2.00 s while the gravitational acceleration is [tex]g=9.80 m/s^2[/tex]. If we re-arrange the previous equation, we can find the pendulum length:
[tex]L=g \frac{T^2}{(2 \pi)^2}=(9.80 m/s^2) \frac{(2.00s)^2}{4 \pi^2}= 0.994 m[/tex]

Then the same pendulum is moved to another location, and its new period is
[tex]T=1.99863 s[/tex]. Again, by re-arranging the same equation, we can find the value of g (gravitational acceleration) at the new location:
[tex]g=L \frac{(2 \pi)^2}{T^2}=(0.994 m) \frac{4 \pi^2}{(1.99863 s)^2}=9.814 m/s^2 [/tex]

How many photons per second are emitted by the antenna of a microwave oven if its power output is 1.00 kw at a frequency of 2515 mhz?

Answers

Final answer:

To determine the number of photons emitted per second by the antenna of a microwave oven, we need to use the formulas for energy per photon and number of photons.

Explanation:

The number of photons emitted by the antenna of a microwave oven can be calculated using the formula:

Number of photons = (Power output / Energy per photon) x frequency

To find the energy per photon, we can use the formula:

Energy per photon = Planck's constant x frequency

Given that the power output is 1.00 kW and the frequency is 2560 MHz, we can convert these values to SI units and calculate the number of photons emitted per second.

Learn more about microwave oven photons here:

https://brainly.com/question/1593533

#SPJ3

Approximately 6.01 x 10²⁶ photons per second are emitted by the antenna of the microwave oven.

To determine the number of photons emitted per second by a microwave oven, we can use the formula:

Number of Photons per Second (N) = Power Output (P) / Energy per Photon (E)

Given:

Power Output (P) = 1.00 kW (or 1000 W)Frequency (f) = 2515 MHz (or 2.515 x 10⁹ Hz)

First, find the energy per photon (E) using the equation:

E = h * f

where h is Planck's constant (6.626 x 10⁻³⁴ Js) and f is the frequency.

Substitute the values:

E = 6.626 x 10⁻³⁴ Js * 2.515 x 10⁹ Hz

E = 1.665 x 10⁻²⁴ J

Next, calculate the number of photons per second:

N = P / E

N = 1000 W / 1.665 x 10⁻²⁴ J

N ≈ 6.01 x 10²⁶ photons per second

Therefore, the antenna of the microwave oven emits approximately 6.01 x 10²⁶ photons per second.

Having landed on a newly discovered planet, an astronaut sets up a simple pendulum of length 1.38 m and finds that it makes 441 complete oscillations in 1090 s. the amplitude of the oscillations is very small compared to the pendulum's length. what is the gravitational acceleration on the surface of this planet? answer in units of m/s 2 .

Answers

The period of a simple pendulum is given by:
[tex]T=2 \pi \sqrt{ \frac{L}{g} } [/tex]
where L is the pendulum length, and g is the gravitational acceleration of the planet. Re-arranging the formula, we get:
[tex]g= \frac{4 \pi^2}{T^2}L [/tex] (1)

We already know the length of the pendulum, L=1.38 m, however we need to find its period of oscillation.

We know it makes N=441 oscillations in t=1090 s, therefore its frequency is
[tex]f= \frac{N}{t}= \frac{441}{1090 s}=0.40 Hz [/tex]
And its period is the reciprocal of its frequency:
[tex]T= \frac{1}{f}= \frac{1}{0.40 Hz}=2.47 s [/tex]

So now we can use eq.(1) to find the gravitational acceleration of the planet:
[tex]g= \frac{4 \pi^2}{T^2}L = \frac{4 \pi^2}{(2.47 s)^2} (1.38 m) =8.92 m/s^2[/tex]

A cello string 0.75 m long has a 220 hz fundamental frequency. find the wave speed along the vibrating string. answer in units of m/s.

Answers

For fundamental frequency of a string to occur, the length of the string has to be half the wavelength. That is,

1/2y = L, where L = length of the string, y = wavelength.

Therefore,
y = 2L = 2*0.75 =1.5 m

Additionally,
y = v/f Where v = wave speed, and f = ferquncy

Then,
v = y*f = 1.5*220 = 330 m/s

A semiconductor can be made by adding atoms of other elements to
a.

aluminum.
b.

steel.
c.

silicon.
d.

zinc.

Answers

Silicon is the main component of most semiconductors used today

Assume that you have two objects, one with a mass of 10 kg and the other with a mass of 18 kg, each with a charge of −0.027 c and separated by a distance of 9 m. what is the electric force that these objects exert on one another? answer in units of n.

Answers

ad asd asdsad as dssar wre s rw ew rtrg yy sf er

Final answer:

Using Coulomb's law, the electric force between two objects with charges of – 0.027 C each and separated by 9 m is 81 N. The force is repulsive since the charges are alike.

Explanation:

To calculate the electric force between two objects using Coulomb's law, one needs to know the charges on the objects and the distance separating them. Coulomb's law is represented by the formula F = k * |q1 * q2| / r2, where F is the force between the charges, k is Coulomb's constant (9.0 × 109 N·m2/C2), q1 and q2 are the amounts of the charges, and r is the distance between them.

In this case, with both objects having a charge of – 0.027 C and separated by a distance of 9 m, the electric force F is calculated as follows:

F = (9.0 × 109 N·m2/C2) * |(– 0.027 C) * (– 0.027 C)| / (9 m)2

Since the charges are like charges, the force will be repulsive and we can ignore the negative sign for the purposes of calculating magnitude:

F = (9.0 × 109 N·m2/C2) * (0.027 C * 0.027 C) / (81 m2) = 9.0 × 109 * 0.000729 / 81 = 8.1 × 101 N

Thus, the electric force between the two objects is 81 N acting to push them apart.

H e l p.. I have no idea what any of this is, what is the first step of the hydrogen fusion process

Answers

The answer to this question is the first choice. In the hydrogen fusion process, the first step involves the collision of two protons to emit an antielectron and a neutrino. Only the first choice of
1_1H + 1_1H →2_1H + e^+ + v + energy
reflects this process. A hydrogen ion with a mass of one and number protons of 1 means a proton.

(A) would be your answer

What happens when a person’s immune system is very weak?

a) The patient’s blood is unable to clot so he or she must take medication.

b) The patient is able to fight off more infections than normal.

c) The patient is unable to fight the infections a healthy person could resist.

d) The patient is unable to take antibiotics and must get a flu shot.

Answers

the correct answer is C) becuse without certain medicine they will dieeeee

Final answer:

When a person's immune system is very weak, their body may be unable to fight off pathogens and diseases that a healthy immune system can resist. This can lead to increased risk of illness and vulnerability to infection.

(Option C)

Explanation:

Immunodeficiency occurs when the immune system is not working properly, generally because one or more of its components are inactive. As a result, the immune system may be unable to fight off pathogens or cancers that a normal immune system would be able to resist. Immunodeficiency may occur for a variety of reasons.

The body's immune system would not be able to fight off pathogens like bacteria with fewer white blood cells. This can increase the risk of illness in HIV patients.

The person's immune system would not be able to distinguish self and non-self. This would make the person very vulnerable to infection.

Learn more about immune system here:

https://brainly.com/question/19843453

#SPJ2

what is an advantage of using coal power over solar power to generate electricity

Answers

Answer:

Coal power can be generated at night

Explanation:

An advantage of using coal power over solar power to generate electricity is Reliable Fuel.

Compared to solar power or wind energy, coal is a reliable, predictable, and dependable fuel. While it may not be at the forefront of national energy production, it can provide invaluable backup service and highly reliable fuel.

What is coal power ?

"Coal-fired power plants burn coal to make steam and the steam turns turbines (machines for generating rotary mechanical power) to generate electricity." Many industries and businesses have their own power plants, and some use coal to generate electricity for their own use and mostly in combined heat and power plants.

What is solar power ?

"Solar power works by converting energy from the sun into power." There are two forms of energy generated from the sun for our use – electricity and heat. Both are generated through the use of solar panels, which range in size from residential rooftops to 'solar farms' stretching over acres of rural land.

Know more about coal power here

https://brainly.com/question/13960354

#SPJ3

A car has two horns, one emitting a frequency of 199 hz and the other emitting a frequency of 203 hz. what beat frequency do they produce?

Answers

Beat frequency, fb = |f2-f1|

That is, beat frequency is the absolute difference between two frequencies. Is is as a results of destructive and constructive inferences.

Therefore, in this case:

fb = 203 - 199 = 4 Hz

The beat frequency produced by two horns emitting frequencies of 199 Hz and 203 Hz is 4 Hz.

The question is regarding the production of beat frequency when two horns with different frequencies sound together. The two horns have frequencies of 199 Hz and 203 Hz, respectively.

To calculate the beat frequency, you subtract the smaller frequency from the larger frequency:

fbeat = |f1 - f2|

fbeat = |203 Hz - 199 Hz|

fbeat = 4 Hz

This means that the beat frequency produced by the two car horns is 4 Hz.

¿Cuál es la velocidad promedio de un hombre que camina 70m con una rapidez de 1m/s y luego corre 70m con una rapidez de 3m/s?

Answers

Hola!

Respuesta:

[tex]1,5 \frac{m}{s} [/tex]

Explicación:

Para calcular la velocidad promedio, necesitamos conocer dos cosas:

1: Distancia total recorrida
2: Tiempo total del recorrido

Del enunciado tenemos los siguientes datos:

Primer tramo:

Distancia recorrida : 70 m
Velocidad: [tex] \frac{1m}{s} [/tex]

Segundo tramo:

Distancia recorrida:70 m
Velocidad: [tex]\frac{3m}{s}[/tex]

Utilizando la siguiente formula:

[tex]X=Xo + V.t[/tex]

Donde:

X: Distancia final
Xo: Distancia inicial
V: Velocidad
T: Tiempo

Para este ejercicio, nos es dada la distancia recorrida, es decir la diferencia entre la distancia final (X) y la distancia inicial (Xo), teniendo que:

[tex]X-Xo= V. t[/tex]

Sustituyendo los valores del primer tramo, tenemos:

[tex]70m= \frac{1m}{s} .t \\ t= \frac{70m}{ \frac{1m}{s \\ } } \\ t= 70s [/tex]

Sustutuyendo los valores del segundo tramo, tenemos:

[tex]70m= \frac{3m}{s} .t \\ t= \frac{70m}{ \frac{3m}{s \\ } } \\ t= 23,33 s[/tex]

Calculando ambos tiempos, tenemos un tiempo de recorrido total de:

[tex]Ttotal= [/tex] Tiempo en el tramo 1 + Tiempo en el tramo 2 [tex]= 93,33 s[/tex]

Para calcular la velocidad promedio, dividimos la distancia total del recorrido por el tiempo total recorrido. Esta viene dada por la siguiente formula:

[tex]Vprom= \frac{Distancia Total}{Tiempo Total} = \frac{140 m}{93,33s} = \frac{1,5m}{s} [/tex]

Que tengas un buen día!

An elephant can hear sound with a frequency of 15 hz. what is the wavelength of this wave if the speed of sound in air is 343 m/s?

Answers

Final answer:

The wavelength of a sound wave with a frequency of 15 Hz and a speed of sound in air of 343 m/s is approximately 22.87 meters.

Explanation:

To calculate the wavelength of the sound wave, we can use the formula:

Speed of sound (v) = wavelength (λ) x frequency (f)

Given that the frequency of the sound wave is 15 Hz and the speed of sound in air is 343 m/s, we can substitute these values into the formula to solve for the wavelength:

343 m/s = λ x 15 Hz

Dividing both sides of the equation by 15 Hz, we get:

λ = 343 m/s / 15 Hz = 22.87 meters (rounded to two decimal places)

Therefore, the wavelength of the sound wave is approximately 22.87 meters.

Learn more about wavelength of sound wave here:

https://brainly.com/question/29359431

#SPJ12

What is a correct way to measure wavelength

Answers

The correct way to measure wavelength is from rarefaction to rarefaction for a longitudinal wave. This would be the correct answer to your question. The wavelength of a wave is the distance from any random point on one wave, to the same point on the next wave. Best way to measure is from the top of one wave, to the top of the next wave. That's a rather simple way to look at the concept.

from rarefaction to rarefaction for a longitudinal wave

Calculate the energy transferred when 4.6g of ice is melted at 0.0c

Answers

Final answer:

The energy transferred when 4.6g of ice is melted at 0.0C can be calculated using the formula Q = mLf, where Q is the heat needed to melt the ice, m is the mass of the ice, and Lf is the latent heat of fusion of water. Substituting the given values, we find that 1536.4 Jules of energy gets transferred.

Explanation:

To calculate the energy transferred when ice is melted, we use the formula Q = mLf, where Q is the heat necessary to melt the ice, m is the mass of the ice, and Lf is the latent heat of fusion of the substance (the energy needed to change the substance from solid to liquid state without changing its temperature). For water, Lf is 334 kJ/kg. So, to find the energy needed to melt 4.6g of ice we rearrange the formula and find: Q = (4.6/1000 kg) x 334,000 J/kg = 1536.4 J. Therefore, 1536.4 Jules of energy gets transferred when 4.6g of ice melts at 0.0C.

Learn more about Energy Transfer

https://brainly.com/question/10345412

#SPJ12

Other Questions

Two technicians are discussing amperage in a series circuit. Technician A states that adding resistors in series will decrease circuit amperage and could blow a fuse. Technician B states that amperage will be the same at all points in a series circuit. Which technician is correct? Three asteroids have exactly the same amount of mass. The distance from asteroid A to asteroid B is 300 km, the distance from asteroid B to C is 400 km, and the distance from C to A is 100 km. Between which two asteroids would the gravitational force be the largest?A). Between asteroid A and B.B). Between asteroid B and C.C). Between asteroid C and A.D). The gravitational force between each pair of asteroids would be the same. joel made some muffins. he gave 1/4 of the muffins to a neighbor. he took 3/8 of the muffins to school. what fraction of the muffins is left The focus of counterinsurgency (COIN) operations generally progresses through three stages. Which stage tries to achieve stability with efforts aimed at assisting the patient through long-term recovery or restoration of health What is the difference between saber and conocer? ackson is making predictions about The Odyssey as he reads this excerpt. Now one thing more. If son of mine you are and blood of mine, let no one hear Odysseus is about. Neither Laertes, nor the swineherd here, nor any slave, nor even Penelope. But you and I alone must learn how far the women are corrupted; we should know how to locate good men among our hands, the loyal and respectful, and the shirkers who take you lightly, as alone and young. Jackson makes the prediction that Odysseus and Telemachus will take the suitors by surprise. Which detail best supports his prediction? What is the value of x in the following equation 1/5x=5^8 A)-8 B) 8 C)40 D)-40 Suppose that in a large company, 30% of the computers are infected by adware. if 6 computers are randomly selected and tested, what is the probability that 2 of the computers are infected by adware? Formerly enslaved people had difficulty becoming economically independent because they lacked the skills needed to work on farms. former Civil War soldiers took their old jobs. they moved to the North, where jobs were limited.most land was returned to white landowners. To solve this system of equations by elimination, what operation could be used to eliminate the y-variable and find the value of x? 2x 4y = 6 3x + 3y = 12 The authors attitude in the leader in the mirror PLEASE HELP! LAST QUESTIONS! I NEED AN 80% OR ABOVE TO PASS PLEASE HELP!The circle graph below shows the percentages of Mrs. Fredericks monthly budget for July. Her total monthly income is $2,800. Pie Chart BelowIn Augusts monthly budget, Mrs. Frederick spent $126 more on clothes than she did in July. In August, what percentage of her monthly income of $2,800 was spent on clothes? A 15% B 12.5% C 11.5% D 10% The Hernandez family has a monthly income of $4,500. The Thomas family has a monthly income of $3,200. The two circle graphs show the monthly budgets of two families.pie charts belowWhich statement is supported by the data in the two graphs? A The Thomas family spends more dollars each month on transportation than the Hernandez family does. B The Hernandez family spends more dollars each month on food than the Thomas family does. C Both families spend more dollars on other than on transportation.D Both families spend the same amount of dollars each month on housing. Hassan deposited $7,500 into a bank account. At the end of 3 years, the account had earned $900 in simple interest. What rate of interest did the account earn per year? A 2.78% B 4% C 8.33% D 12% Mr. Wilt prepares some chicken wings for a picnic. The bar graph below shows the number of different types of wings he prepares.Bar graph below Based on the bar graph, which of these statements is true?A Mr. Wilt prepares 2 more plain wings than hot wings. B Mr. Wilt prepares twice as many plain wings as hot wings. C Mr. Wilt prepares 2 more barbecue wings than garlic wings. D Mr. Wilt prepares twice as many barbecue wings as garlic wings. Which of the following would be best represented by a circle graph? A the heights of different types of trees B the number of votes for each of 5 candidates for class president C theamountofwaterthatlledasinkafter1,2, 3, and 4 minutes D the number of hours each student studied compared to their grades on a test The ages of the members of a volunteer group are shown below. 13, 14, 14, 14, 15, 15, 15, 16, 16, 21, 23 Which box and whisker plot best represents these data?Data belowABCD Chinese artists reinforced national identity during periods of foreign occupation by Was the Canadian Shield caused by glaciers during the Ice Age? Katie has increased her weekly runs from four miles to six miles, and she's noticed that her energy levels have decreased since doing so. What should Katie do to increase her energy? A) She needs to consume fewer calories to increase her energy. B) She needs to consume more calories to increase her energy. C) She needs to decrease her weekly run time back to four miles to boost her energy. D) She needs to increase her weekly run time to eight miles to boost her energy. as the temperature of the water gets colder, the speed of its molecules: At age 75, julie is typical of people her age. she believes that when compared to others of the same age, __________. According to kohlberg, a person who is faced with stealing something that will save someone else's life and who bases his or her decision on a universal moral principle that is broader than the rules of the particular society in which he or she lives in order to live up to his or her own moral principle is in the ___________ stage of morality. What happens to the vast majority of bills introduced into the house of representatives and senate? Which of these is an example of kinesis? select one:a. a flea is more active in a dry environmentb. a bird homes in on a familiar wetlands areac. a rabbit runs away from a predatord. none of the answers provided are correcte. a moth is drawn to an electric light at night?