The tank as a cone.
As per the question, the tank is given a shape of an inverted circular cone has a point to the bottom with an height of radius of 4 feet. The tank is full of water the pipe can be cued to pump out the water from the top and until which the tank ill have a level of 5 feet from the bottom.
Thus the answer is W equals to 468832 foot-pound
As per the given information the tank consists of the inverted circular cone the Height of cone is equal to 10 feet and radius = 4 feet After water pumped out height = 5 ft. Thus the volume of water pumped out Here we have r/h is constant alwaysHence the Substitute to get volume of water pumped out equals to the Mass of water = density x volume = Work done = force x displacement = mass x accents x displacement. Here acceleration = gravity = 32.2 ft/sec^2. Displacement = height reduced = 5 ft.Hence the W equals to 2912(32.2) that is 468832\pi foot-pound.Learn more about the shape of an inverted.
https://brainly.com/question/23758952.
To calculate the work required to pump water from an inverted circular cone tank, we use a formula that accounts for the weight density of water, volume of water, and height the water is lifted. We integrate from the middle of the tank, where the water level is 5 feet high, up to the top. The work is expressed in foot-pounds and involves an integral that can be solved using calculus.
Explanation:To calculate the work W required to pump water out of an inverted circular cone tank, we must use the concept of work done against gravity. The formula for work is W = γ x V x h, where γ (gamma) represents the weight density of water, V is the volume of water being lifted, and h is the distance the water is lifted.
Since the tank is a cone and water is being lifted from the current water height to the top of the tank, we have to integrate the work done for each infinitesimally small volume δV of water from the water level at 5 feet to the top at 10 feet. The water has a circular cross-section at any height y, with a radius that can be determined by similar triangles.
As the radius of the tank at the top is 4 feet and the height is 10 feet, the radius r at height y is (4/10)*y. The cross-sectional area A at height y is πr^2, which is (π * (4/10)^2 * y^2). The volume element δV is then A δy, and the work element δW is γ * A * (10 - y) δy. The total work is found by integrating δW from 5 to 10 feet.
The weight density of water γ is typically 62.4 lb/ft^3, so the integral becomes: W = ∫ γ * π * (16/100) * y^2 * (10 - y) dy from 5 to 10. This integral can then be evaluated to find the total work W in foot-pounds.
Review the following inferences and tell me if you consider them valid conclusions one can draw from the give information. i. If the moon is made of green cheese, then cows jump over it. The moon is made of green cheese, Therefore, cows jump over the moon. ii. If Socrates was a philosopher then he wasn't a historian. Socrates wasn't a historian. So, Socrates was a philosopher. Note: I may not grade this question. The only reason you are asked to solve them is for me to get a feel for the mathematical maturity of the members of this class.
The validity of the conclusion (Socrates was a philosopher) does not necessarily follow from the premises because there could be other reasons for Socrates not being a historian.
Let's analyze each inference:
Inference i:
If the moon is made of green cheese, then cows jump over it. The moon is made of green cheese, Therefore, cows jump over the moon.
This inference is an example of a valid logical argument known as modus ponens, a form of deductive reasoning. The structure can be broken down as follows:
Premise 1: If the moon is made of green cheese, then cows jump over it.
Premise 2: The moon is made of green cheese.
Conclusion: Therefore, cows jump over the moon.
Since both premises are assumed to be true, the conclusion logically follows.
Inference ii:
If Socrates was a philosopher then he wasn't a historian. Socrates wasn't a historian. So, Socrates was a philosopher.
This inference is an example of the logical fallacy known as affirming the consequent. Even though the conclusion might be true, the argument's structure is invalid. The structure can be broken down as follows:
Premise 1: If Socrates was a philosopher then he wasn't a historian.
Premise 2: Socrates wasn't a historian.
Conclusion: So, Socrates was a philosopher.
Here, the validity of the conclusion (Socrates was a philosopher) does not necessarily follow from the premises because there could be other reasons for Socrates not being a historian.
Find P-1, where P = [adg beh cfi] is orthogonal.
Answer: The required inverse of the given matrix is
[tex]P^{-1}=\left[\begin{array}{ccc}a&b&c\\d&e&f\\g&h&i\end{array}\right].[/tex]
Step-by-step explanation: We are given to find the inverse of the following orthogonal matrix :
[tex]P=\left[\begin{array}{ccc}a&d&g\\b&e&h\\c&f&i\end{array}\right] .[/tex]
We know that
if M is an orthogonal matrix, then the inverse matrix of M is the transpose of M.
That is, [tex]M^{-1}=M^T.[/tex]
The transpose of the given matrix P is given by
[tex]P^T=\left[\begin{array}{ccc}a&b&c\\d&e&f\\g&h&i\end{array}\right].[/tex]
Therefore, according to the definition of an orthogonal matrix, the inverse of matrix P is given by
[tex]P^{-1}=P^T=\left[\begin{array}{ccc}a&b&c\\d&e&f\\g&h&i\end{array}\right].[/tex]
Thus, the required inverse of the given matrix is
[tex]P^{-1}=\left[\begin{array}{ccc}a&b&c\\d&e&f\\g&h&i\end{array}\right].[/tex]
A salesperson makes a five percent commission on every sale she makes. Her daily sales in dollars) for the past 16 working days were: 28 49 50 34 33 44 35 25 29 30 35 34 32 40 78 39. a) Find the 5 number summary and P30 b) Find the values of the standard deviation, range, and interquartile range (IQR). c) Are there any outliers? Explain!.
Answer:
Step-by-step explanation:
a. The five-number summary is made up of the following summary means:
1. Minimum: 25
2. First Quartile: 30.5
3. Medium: 34.5
4. Third quartile: 43
5. Maximum: 78
6. P30: 32.1
b.
Standard Deviation: 12.72
Rank: 53
Interquartile range: 12.5
C. The interquartile range is 12.5 and 1.5 times the interquartile range is (1.5) (12.5) = 18.75. Third quartile plus 1.5 times the interquartile range is 61.75. The value of 78 exceeds 61.75, then 78 is an outlier.
Write down a fraction whose value lies between 3 and 4; whose denominator is a multiple of 5; whose numerator is a multiple of 11, and whose denominator is less than 17. How many can you find? This may look hard, so instead, try the following sequence derived from it: Write down a fraction whose value lies between 3 and 4. Write down a fraction whose value lies between 3 and 4 and whose denominator is a multiple of 5; find a way to write down all such fractions.
Answer:
33/10 and 55/15
Step-by-step explanation:
Possible denominators that are multiples of 5 less than 17 are 5, 10, 15.
Corresponding numerator ranges are [15, 20], [30, 40], and [45, 60]. In only two of these ranges are there any multiples of 11.
33 in [30, 40]
55 in [45, 60]
So, there are only two possible fractions meeting your requirement:
33/10 and 55/15
Solve the initial value problem y" – 4y' - 5y = 0, y(-1) = 3, y'(-1) = 9.
Answer:
y=2 e^{(5x +5)} + e^{(-x - 1)}
Step-by-step explanation:
Here we have an ODE, matched to zero, so it is an
homogeneous equation. The typical aproach here is to propose a solution to y and then find the constants that fullfit the equation.
We propose [tex]y=e^{rx} \\\\So \frac{dy}{dx} = re^{rx}\\And \\\frac{dy^{2} }{dx^{2} } = r^{2} e^{rx}Replacing this in the original equation, we getr^{2} e^{rx} - 4re^{rx} -5e^{rx} = 0\\[/tex]
Taking the exponential as a factor, we obtain:
[tex]e^{rx}(r^{2} - 4r -5) = 0\\[/tex]
An exponential function is always greater than zero, so the only way of matching the equation is to find two "r" that reduce the second term to zero(you can factorize or use the Quadratic formula (see imagen below).
[tex](r^{2} - 4r -5) = 0\\ r= 5 and r=-1\\\\[/tex]
So, this gives us the two parts of our solution:
[tex]y= C e^{5x} + D e^{-x}[/tex] , with C and D being real numbers.
In order to find C and D, we will use the initial values given in the question.
[tex]y = C e^{5x} + De^{-x}\\\\\frac{dy}{dx} = 5C e^{5x} - D e^{-x} \\y(-1) = 3= C e^{-5} + De^{1}\\\frac{dy}{dx} = 9 = 5C e^{-5} - D e^{1} \\[/tex]
That is a linear equations system of two equations and two unknowns, which is resolveable :
[tex]\left \{ {{C e^{-5} + De = 3} \atop {5C e^{-5} - De= 9}} \right. \\[/tex]
To make it more clear, we will make a change of variables:
[tex]C e^{-5} = A\\De = B\\\\So\\\left \{ {{A + B= 3 } \atop {5A - B=9}} \right. \\\\[/tex]
Clearing B:
[tex]B = 3 - A\\\\5A - 3 + A = 9\\6A = 12, A = 2[/tex]
For B, we go back to (1)
[tex]B=3-A (1)\\B = 3-2, B=1[/tex]
Now, we undo the change of variable :
[tex]A= C e^{-5} = 2 \\C= \frac{2}{e^{-5} } \\\\B = De= 1\\D=\frac{1}{e}[/tex]
Finally, we just replace C and D in y and then work a bit with it to have a more aesthetic response:
[tex]y=C e^{5x} + De^{-x}\\y= \frac{2}{e^{-5} } e^{5x} + \frac{1}{e} e^{-x}\\y = 2 e^{5x - (-5)} + e^{(-x - 1)}\\y=2 e^{(5x +5)} + e^{(-x - 1)}[/tex]
To solve the given initial value problem, we can use the characteristic equation and the known initial conditions to find the solution. The solution to the initial value problem is y(x) = 3.440e^(-x) - 6.440e^(5x).
Explanation:To solve the initial value problem y'' - 4y' - 5y = 0, y(-1) = 3, y'(-1) = 9, we can use the characteristic equation. The characteristic equation for this differential equation is r^2 - 4r - 5 = 0. Solving this equation, we find the roots r = -1 and r = 5.
Therefore, the general solution to the differential equation is y(x) = c1e^(-x) + c2e^(5x), where c1 and c2 are constants.
Using the initial conditions, y(-1) = 3 and y'(-1) = 9, we can solve for c1 and c2. Substituting the values of y and y' into the general solution and rearranging the equations, we get c1e + c2e^(-5) = 3 and -c1e - 5c2e^(-5) = 9.
Solving these two equations simultaneously, we find c1 ≈ 3.440 and c2 ≈ -6.440. Therefore, the solution to the initial value problem is y(x) = 3.440e^(-x) - 6.440e^(5x).
Learn more about initial value problem here:https://brainly.com/question/37096862
#SPJ3
Find the average rate of change of the function below from x1 to x2.
f(x)=2x+7
from
x1=−1
to
x2=0
Question 9 options:
a)
2
b)
−12
c)
13
d)
-8
e)
none
Answer:
The average rate of change is 2, letter a)
Step-by-step explanation:
Given a function y, the average rate of change S of y=f(x) in an interval [tex][x_{s}, x_{f}][/tex] will be given by the following equation:
[tex]S = \frac{f(x_{f}) - f(x_s)}{x_{f} - x_{s}}[/tex].
In our problem, we have that:
[tex]f(x) = 2x + 7[/tex]
[tex]x_{s} = -1[/tex]
[tex]x_{f} = 0[/tex]
So:
[tex]f(x_{s}) = f(-1) = 2(-1) + 7 = -2 + 7 = 5[/tex]
[tex]f(x_{f}) = f(0) = 2(0) + 7 = 0 + 7 = 7[/tex]
The average rate of change is:
[tex]S = \frac{f(x_{f}) - f(x_s)}{x_{f} - x_{s}} = \frac{7-5}{0 -(-1)} = \frac{2}{1} = 1[/tex]
The average rate of change is 2, letter a)
Answer:
wala akong alam jun
Step-by-step explanation:
i hate math, mathuloggggggg ka, ayieee ?luh asa ka
An inhalation aerosol contains 225 mg of metaproterenol sulfate, which is sufficient for 300 inhalations. How many micrograms of metaproterenol sulfate would be contained in each inhalation?
Answer:
Each inhalation has 750 micrograms of metaproterenol sulfate.
Step-by-step explanation:
First step: How many miligrams are there in each inhalation.This can be solved by a rule of three problem.
In a rule of three problem, the first step is identifying the measures and how they are related, if their relationship is direct of inverse.
When the relationship between the measures is direct, as the value of one measure increases, the value of the other measure is going to increase too.
When the relationship between the measures is inverse, as the value of one measure increases, the value of the other measure will decrease.
In this step, our measures are:
- The number of inhalations.
- The quantity inhaled.
As the number of inhalations increases, so does the quantity inhaled. This means that this is a direct rule of problem.
300 inhalations contains 225mg of metaproterenol sulfate. How many miligrams are in a inhalation?
300 inhalations - 225mg
1 inhalation - xmg
300x = 225
[tex]x = \frac{225}{300}[/tex]
x = 0.75mg
Each inhalation has 0.75mg of metaproterenol sulfate.
Final step: Conversion of 0.75mg to micrograms.
Each mg has 1000 micrograms. So:
1mg - 1000 micrograms
0.75mg - x micrograms
x = 1000*0.75
x = 750 micrograms
Each inhalation has 750 micrograms of metaproterenol sulfate.
To find out how many micrograms of metaproterenol sulfate are contained in each inhalation, convert the total milligrams to micrograms, then divide by the total number of inhalations. Thus, each inhalation contains 750 μg of metaproterenol sulfate.
Explanation:The problem requires conversion of milligrams (mg) to micrograms (μg) which will allow for the calculation of the amount of metaproterenol sulfate in each inhalation. It is important to know that 1 mg is equal to 1000 μg. Hence, 225 mg of metaproterenol sulfate is equal to 225,000 μg (225 X 1000). To find out how many micrograms are in each inhalation, divide the total number of micrograms (225,000 μg) by the total number of inhalations (300). Hence, each inhalation contains 750 μg of metaproterenol sulfate.
Learn more about Dosage Calculation here:
https://brainly.com/question/31339825
#SPJ3
Design a logic circuit to take input signals P, Q, and R and output a 1 if , and only if, P and Q have the same value and Q and R have opposite values.
Step-by-step explanation:
We have 3 given inputs namely P, Q, R and we have to draw a logic circuit which will give the output 1 if , and only if, P and Q have the same value and Q and R have opposite values.
So, first of all we make a truth table for this
P Q R Output(Y)
0 0 0 0
0 0 1 1
0 1 0 0
0 1 1 0
1 0 0 0
1 0 1 0
1 1 0 1
1 1 1 0
From the truth table we can see that the output, Y can be given by
[tex]Y=\bar{P}\bar{Q}R+PQ\bar{R}[/tex]
So, the logic circuit for the given logic equation can be drawn as shown fig.
To design a logic circuit that outputs a 1 if, and only if, P and Q have the same value and Q and R have opposite values, use XOR and AND gates in a specific configuration.
Explanation:To design a logic circuit that outputs a 1 if, and only if, P and Q have the same value and Q and R have opposite values, we can use logic gates. Here's the step-by-step design:
Use an XOR gate to determine if P and Q have opposite values. Connect P and Q to the inputs of the XOR gate.Use another XOR gate to determine if Q and R have opposite values. Connect Q and R to the inputs of this second XOR gate.Connect the outputs of both XOR gates to the inputs of an AND gate. This AND gate will output a 1 only if both inputs are 1.Thus, the logic circuit will output a 1 if, and only if, P and Q have the same value and Q and R have opposite values.
Learn more about Designing a logic circuit here:https://brainly.com/question/33346752
#SPJ3
Find the expansion of tan x about the point X = 0.
Answer:
[tex]f(x) = x +\frac{1}{3}x^{3}+....[/tex]
Step-by-step explanation:
As per the question,
let us consider f(x) = tan(x).
We know that The Maclaurin series is given by:
[tex]f(x) = f(0) + \frac{f^{'}(0)}{1!}\cdot x+ \frac{f^{''}(0)}{2!}\cdot x^{2}+\frac{f^{'''}(0)}{3!}\cdot x^{3}+......[/tex]
So, differentiate the given function 3 times in order to find f'(x), f''(x) and f'''(x).
Therefore,
f'(x) = sec²x
f''(x) = 2 × sec(x) × sec(x)tan(x)
= 2 × sec²(x) × tan(x)
f'''(x) = 2 × 2 sec²(x) tan(x) tan(x) + 2 sec²(x) × sec²(x)
= 4sec²(x) tan²(x) + 2sec⁴(x)
= 6 sec⁴x - 4 sec² x
We then substitute x with 0, and find the values
f(0) = tan 0 = 0
f'(0) = sec²0 = 1
f''(0) = 2 × sec²(0) × tan(0) = 0
f'''(0) = 6 sec⁴0- 4 sec² 0 = 2
By putting all the values in the Maclaurin series, we get
[tex]f(x) = f(0) + \frac{f^{'}(0)}{1!}\cdot x+ \frac{f^{''}(0)}{2!}\cdot x^{2}+\frac{f^{'''}(0)}{3!}\cdot x^{3}+......[/tex]
[tex]f(x) = 0 + \frac{1}{1}\cdot x+ \frac{0}{2}\cdot x^{2}+\frac{2}{6}\cdot x^{3}+......[/tex]
[tex]f(x) = x +\frac{1}{3}x^{3}+....[/tex]
Therefore, the expansion of tan x at x = 0 is
[tex]f(x) = x +\frac{1}{3}x^{3}+....[/tex].
In the 2000 Sydney Olympics, a special program initiated by IOC president Juan Antonio Samaranch allowed developing countries to send athletes to the Olympics without the usual qualifying procedure. Here are the 71 times for the first round of the 100 meter men’s swim (in seconds).60.39 49.93 53.40 51.82 50.46 51.36 50.28 50.19 52.1450.56 52.72 50.95 49.74 49.16 52.57 52.53 52.09 52.4049.75 54.06 53.50 50.63 51.93 51.62 52.58 53.55 51.0749.76 49.73 50.90 59.26 49.29 52.78 112.72 49.79 49.8352.43 51.28 52.22 49.76 49.70 52.90 50.19 54.33 62.4551.93 52.24 52.82 50.96 48.64 51.11 50.87 52.18 54.1250.49 49.84 52.91 52.52 50.32 51.52 52.00 52.85 52.2449.45 51.28 49.09 58.79 49.74 49.32 50.62 49.45Calculate the sample mean and sample standard deviation(use Excel functions).
Answer:
The means for times for the first round of the 100 meter men’s swim is 52.64789 seconds
The satandar deviation for times for the first round of the 100 meter men’s swim is 7.60182 seconds
Step-by-step explanation:
The sample mean for a set of n data is given by:
[tex]\bar X = \frac{1}{n}\sum{x_i}[/tex]
In other words, the sample mean of the times for 71 times of the first round measured in seconds is:
[tex]\bar X = \frac{1}{71}\sum{x_i} = 52.64789[/tex] seconds
The sample standard deviation for a set of n data is given by:
[tex]S = \sqrt{\frac{1}{n-1}\sum{(x_i - \bar x)^2}}[/tex]
In other words, the sample standard deviation of the times for 71 times of the first round measured in seconds is:
[tex]S = \sqrt{\frac{1}{n-1}\sum{(x_i - \bar x)^2}} = 7.60182[/tex] seconds
Jordan is making gifts for volunteers and orders 4,580 personalized M&Ms. She puts 34 M&Ms in each gift. How many gifts can she make?
Answer:
134
Step-by-step explanation:
to find how many gifts it can make, you must find how many times 34 can go into 4580. do this by deciding 4580 by 34.
4580/34=134.7
Since you can't make less than a whole gift you must round it down to 134
Jordan can make 134 number of gifts with 34 M & M s in each with 4580 personalized M and M s.
Jordan wants to gift the volunteer so he is making the gifts for volunteers.
For gifting purpose the number of personalized M and M s she ordered is given by = 4580.
The number of personalized M and M s she puts in each volunteer 's gift is given by = 34.
So the number of total gifts she can pack with this number of personalized M and M s given by = 4580/34 = 134.7 = 134 approximately.
So Jordan can make 134 gifts with 34 M and M s in each with 4580 personalized M and M s.
To know more about number here
https://brainly.com/question/1553674
#SPJ2
Write the standard form of the quadratic function whose graph is a parabola with the given vertex and that passes through the given point. (Let x be the independent variable and y be the dependent variable.)
Vertex: (−3, 4); point: (0, 13)
Answer:
The formula for this quadratic function is x*2 +6x+13
Step-by-step explanation:
If we have the vertex and one point of a parabola it is possible to find the quadratic function by the use of this
y= a (x-h)*2 + K
Quadratic function looks like this
y= ax*2 + bx + c
So let's find the a
y= a (x-h)*2 + K where
y is 13, x is 0, h is -3 and K is 4
13= a (0-(-3))*2 +4
13=9a +4
9=9a
9/9=a
1=a
The quadratic function will be
y= 1(x+3)*2 + 4
Let's get the classic form
(x+3)*2 = (x+3)(x+3)
(x*2+3x+3x+9)
x*2 +6x+13
f(0) = 13
The standard form of the quadratic function whose graph is a parabola with the given vertex and that passes through the given point is;
y = x² + 6x + 13
We are given;
Vertex coordinate; (-3, 4)
A point on the graph; (0, 13)
The vertex form of a quadratic equation is given by;
y = a(x - h)² + k
Where h, k are the coordinates of the vertex.
a is the letter in general form of quadratic equation which is;
y = ax² + bx + c
Thus, at point (0, 13) at the vertex of (-3, 4), we have;
13 = a(0 - (-3))² + 4
⇒ 13 - 4 = 9a
9a = 9
a = 9/9
a = 1
Since y = a(x - h)² + k is the vertex form, let us put the vertex values for h and k as well as the value of a to get the quadratic equation;
y = 1(x - (-3))² + 4
y = x² + 6x + 9 + 4
y = x² + 6x + 13
Read more at; https://brainly.com/question/17546421
The area of a surface can be measured in units of square meters (m^2). Which of the following combinations of units could not be used to measure area?
a)m.cm
b)ft^3/m^2
c)in^2
d)m.ft
e)ft^3/m
Answer:
Option B is the answer.
Step-by-step explanation:
The area of a surface can be measured in square meter (meter²).
Square meter means its a multiplication of two lengths measured in meter.
Option A.
m.cm = unit of length × unit of length
So we can measure the area by this unit.
Option B.
[tex]\frac{ft^{3} }{m^{2} }[/tex]
Since ft³ is a unit of volume and m² of area. When we divide these units we get the unit of length.
Therefore, we can not measure the area by this unit.
Option C.
Inch² = unit of length × unit of length
So we can measure the area by this unit.
Option D.
m.ft = Unit of length × unit of length
Which shows its a unit of area.
Option E.
[tex]\frac{ft^{3} }{m}[/tex] = [tex]\frac{\text{Unit of volume}}{\text{Unit of length}}[/tex]
= unit of area
Therefore, we can use this unit to measure the area.
Option B. is the answer.
What is the negation of the following statement: "n is divisible by 6 or n is divisible by both 2 and 3."
A. n is not divisible by 6 or n is divisible by both 2 and 3.
B. n is not divisible by 6 and n is divisible by both 2 and 3.
C. n is divisible by 6 or n is divisible by both 2 and 3.
D. n is divisible by 6 and n is not divisible by both 2 and 3.
E. n is divisible by 6 and n is divisible by both 2 and 3.
F. n is not divisible by 6 or n is not divisible by both 2 and 3.
G. n is divisible by 6 or n is not divisible by both 2 and 3.
H. n is not divisible by 6 and n is not divisible by both 2 and 3.
Answer:
H.''n is not divisible by 6 and n is not divisible by both 2 and 3.
Step-by-step explanation:
We are given that a statement ''n is divisible by 6 or n is divisible by both 2 and 3.''
We have to write the negation of the given statement.
Negation: If a statement p is true then its negations is p is false.
n is divisible by 6 then negation is n is not divisible by 6.
n is divided by both 2 and 3 then negation is n is not divisible by both 2 and 3.
Therefore, negation of given statement
''n is not divisible by 6 and n is not divisible by both 2 and 3.
Hence, option H is true.
Answer:
H.''n is not divisible by 6 and n is not divisible by both 2 and 3.
Step-by-step explanation:
We are given that a statement ''n is divisible by 6 or n is divisible by both 2 and 3.''
We have to write the negation of the given statement.
Negation: If a statement p is true then its negations is p is false.
n is divisible by 6 then negation is n is not divisible by 6.
n is divided by both 2 and 3 then negation is n is not divisible by both 2 and 3.
Therefore, negation of given statement
''n is not divisible by 6 and n is not divisible by both 2 and 3.
Hence, option H is true.
Step-by-step explanation:
Write two examples of propositions in English, p1 and p2.
Answer:
p1. If I pay attention to class, therefore I'll take good grades on test next week.
p2. I like cheese.
Step-by-step explanation:
Propositions are statements that declare something from/for someone. It always states something. It may be classified as simple (p1) or combined (p2) depending on the presence or absence of logical connectors p1 (If...therefore). A combined proposition is made up of two simple propositions.
We can and ought work with symbolic operators.
Let p1 be translated into symbolic language,
I pay attention to class = q
I'll take good grades on test next week r
q→r
p2= I like cheese. We can just simply call it p2.
Show that a sequence {sn} coverages to a limit L if and only if the sequence {sn-L} coverages to zero.
Step-by-step explanation:
To prove this we can use the definition of a sequence converging to its limit, in terms of epsilon:
The sequence [tex] \{ S_n\}[/tex] converges to [tex]L[/tex]
if and only if
for every [tex]\epsilon >0[/tex] there exists [tex]n_0\in \mathbb{N}[/tex] such that
[tex] n>n_0 \implies |S_n-L|<\epsilon[/tex]
if and only if
for every [tex]\epsilon >0[/tex] there exists [tex]n_0\in \mathbb{N}[/tex] such that [tex] n>n_0 \implies |(S_n-L) - 0|<\epsilon[/tex]
if and only if
the sequence [tex]\{S_n-L\}[/tex] converges to 0.
g A four-input digital circuit is used to detect whether the resulting product of two two-bits numbers is greater or equal than 3. Consider that the two-bit numbers are given as the inputs BA and DC. So, your design will implement a function X (D, C, B, A) that is "0" if the product of BA X DC is less than 3 and "1" if it is greater or equal than 3. For example if your inputs are (D, C, B, A) = 1010, then the result value is "1" (X (D, C, B, A) =1), since BA =10 (210 ) and DC =10 (210)and the product will be 4, which is greater or equal than 3. On the other hand, if for example, (D, C, B, A) = 1001 then (X (D, C, B, A)=0), since BA =01 (110) and DC =10 (210) with a product equals to 2. The minterm expression for the function X (D, C, B, A) is:
Answer:
Tthe minterm expression for the function X is:
X = B'ADC + BA'DC' + BA'DC + BAD'C + BADC' + BADC
(The character ' refers to the complement of the variable)
Step-by-step explanation:
It is important to know that a minterm refers to a product of all variables that have a result of 1 in the truth table. The variables can be with or without complement. For example, consider the following truth table:
A, B, F
0, 0, 0
0, 1, 0
1, 0, 0
1, 1, 1
According to the previous truth table, the minterm would the row that F equals 1. In this case, when A and B are 1, F is 1. So, the variables are used directly (without complement). The minterm is: F = AB
Now, according to the problem, the truth table is presented below. The idea is to complete the X column which is '0' if the product BA x DC is less than 3 and is '1' if the product BA x DC is greater or equal than 3.
B, A, D, C, X0, 0, 0, 0, 0 (0x0=0)0, 0, 0, 1, 0 (0x1=0)0, 0, 1, 0, 0 (0x2=0)0, 0, 1, 1, 0 (0x3=0)0, 1, 0, 0, 0 (1x0=0)0, 1, 0, 1, 0 (1x1=1)0, 1, 1, 0, 0 (1x2=2)0, 1, 1, 1, 1 (1x3=3)1, 0, 0, 0, 0 (2x0=0)1, 0, 0, 1, 0 (2x1=2)1, 0, 1, 0, 1 (2x2=4)1, 0, 1, 1, 1 (2x3=6)1, 1, 0, 0, 0 (3x0=0)1, 1, 0, 1, 1 (3x1=3)1, 1, 1, 0, 1 (3x2=6)1, 1, 1, 1, 1 (3x3=9)The idea is to get the rows that have '1' in the X column. The minterms are are: 8, 11, 12, 14, 15 and 16. The minterm is composed by the four variables. To indicate a '1' just put the letter. To indicate a '0' put a letter with this character: '. For example, the row 8 would be B'ADC, because B is '0' and the others are '1'. The total minter expression is:
X = 'minterm 8' + 'minterm 11' + 'minterm 12' + 'minterm 14' + 'minterm 15' + 'minterm 16'
X = B'ADC + BA'DC' + BA'DC + BAD'C + BADC' + BADC
Thus, the minterm expression for the function X is:
X = B'ADC + BA'DC' + BA'DC + BAD'C + BADC' + BADC
If the shape of our data set is multimodal, we expect:
(A) the mean to be less than the median.
(B) the mean to be larger than the median.
(C) the mean and the median to be approximately the same.
(D) none of the these.
Answer: (D) none of the these.
Step-by-step explanation:
A multimodal distribution refers to a distribution with two or more modes.If the shape of our data set is multimodal, the it will show two or more peaks which represents the number modes in the data.
Since it has no relation with mean or median of the data, there for the correct option will be "none of these".
In a multimodal distribution, the relationship between the mean and the median cannot be determined without more information on the distribution's skewness and the relative size of the peaks. Thus, the answer is that none of the provided options are necessarily correct.
Explanation:When dealing with a multimodal distribution, which is a distribution with more than one peak or "mode," the relationship between the mean, the median, and the mode is not as predictable as it is in symmetric distributions. Since multimodal distributions can have multiple peaks at different points, it can alter the typical order of the mean, median, and mode based on where these peaks occur relative to each other.
The presence of multiple modes can pull the mean toward the larger values if one peak represents higher values significantly, or it can pull the mean towards lesser values if a peak represents lower values significantly. However, without additional specific information about the skewness or the relative size of these peaks, we cannot definitively say whether the mean will be less than, equal to, or greater than the median. Therefore, the correct answer is:
(D) none of these.
A liquid contains 0.25 mg of a substance per milliliter. How many grams of the substance will 3.5 L contain?
Answer:
3.5 of the liquid will contain 0.875g of the substance.
Step-by-step explanation:
The problem states that a liquid contains 0.25 mg of a substance per milliliter. And asks how many grams of the substance will 3.5 L contain.
First step: Conversion of 3.5L to ml
Each liter has 1000ml. So:
1L - 1,000mL
3.5L - xmL
x = 1,000*3.5
x = 3,500mL
Second step: How many miligrams are there in 3,500mL?
The problem states that each ml of the liquid contains 0.25mg of a substance. So
1ml - 0.25mg
3,500 mL - xmg
x = 3,500*0.25
x = 875mg
Final step: Conversion of 875mg to g.
Each g has 1000 mg. So
1g - 1000mg
xg - 875mg
1000x = 875
[tex]x = \frac{875}{1000}[/tex]
x = 0.875g
3.5 of the liquid will contain 0.875g of the substance.
To find the mass of the substance in 3.5 L, convert the volume to milliliters and then multiply by the concentration. The mass is 0.875 g.
Explanation:To find the number of grams of the substance, we need to convert from milliliters to liters and then use the given concentration of 0.25 mg/mL to find the mass.
First, we convert 3.5 L to milliliters by multiplying by 1000: 3.5 L x 1000 mL/L = 3500 mL.
Next, we multiply the volume in milliliters (3500 mL) by the concentration (0.25 mg/mL) to find the mass: 3500 mL x 0.25 mg/mL = 875 mg.
Finally, we convert the mass from milligrams to grams by dividing by 1000: 875 mg / 1000 = 0.875 g.
Learn more about converting units here:https://brainly.com/question/11875738
#SPJ3
If a 100 m. diameter wind turbine is exposed to 7 m/s wind with an air density of 1.25 kg/m what is the electricity produced by the turbine? Assume a 32% efficiency of the turbine.
Answer:
electric energy = 980 J
Step-by-step explanation:
Given,
Diameter of wind turbine = 100 m
Speed of wind,v = 7 m/s
Density of air = 1.25 kg/m
Hence, the total mass of air enters into turbine =Speed of wind x Diameter of wind turbine
= 1.25 x 100
= 125 kg
Hence, total mechanical energy of turbine can be given by,
[tex]E\ =\ \dfrac{1}{2}.m.v^2[/tex]
[tex]=\ \dfrac{1}{2}\times 125\times 7^2[/tex]
= 3062.5 J
Efficiency of turbine = 32%
Hence,
total electric energy = 32% of mechanical energy
[tex]=\dfrac{32}{100}\times 3062.5\ J[/tex]
= 980 J
So, the total electric energy produced by the turbine will be 980 J.
Final answer:
The electricity produced by a 100m diameter wind turbine exposed to 7 m/s wind and with a density of 1.25 kg/m^3, assuming a 32% efficiency, would be approximately 5.39 megawatts.
Explanation:
To calculate the electricity produced by a 100-meter diameter wind turbine exposed to a wind speed of 7 m/s, we initially need to find out the power generated by the turbine before efficiency losses. We use the formula for the power captured by the wind turbine:
P = ½ ρ A v³
Where ρ (rho) is the air density, A is the swept area of the turbine blades, and v is the wind velocity.
First, let's calculate the swept area (A):
A = πr²
A = π(½ × 100 m)²
A = π(× 50 m)²
A = π × 2500 m²
A = 7853.98 m²
Next, plug in the values into the power equation:
P = 0.5 × 1.25 kg/m³ × 7853.98 m² × (7 m/s)³
P = 0.5 × 1.25 × 7853.98 × 343
P = 16839589.89 watts or 16.84 MW before efficiency losses.
To obtain the electricity produced considering the efficiency of the turbine, we multiply the initial power by the efficiency factor:
Electricity produced = P × efficiency
Electricity produced = 16.84 MW × 0.32
Electricity produced = 5.39 MW
Thus, the wind turbine would produce approximately 5.39 megawatts of electricity under the given conditions.
At a unit price of $900, the quantity demanded of a certain commodity is 75 pounds. If the unit price increases to $956, the quantity demanded decreases by 14 pounds. Find the demand equation (assuming it is linear) where p is the unit price and x is the quantity demanded for this commodity in pounds.
p =
At what price are no consumers willing to buy this commodity?$
According to the above model, how many pounds of this commodity would consumers take if it was free?
Answer:
a) 56x = 16800 - 14p
b) $1200
c) 300 pounds
Step-by-step explanation:
Given:
At p₁ = $900 ; x₁ = 75 pounds
at p₂ = $956 ; x₂ = 75 - 14 = 61 pounds
Now,
from the standard equation of line, we have
[tex](x - x_1)=\frac{(x_2-x_1)}{(p_2-p_1)}\times(p-p_1)[/tex]
on substituting the respective values, we get
[tex](x - 75)=\frac{(61-75)}{(956-900)}\times(p-900)[/tex]
or
( x - 75 ) × 56 = -14p + 12600
or
56x - 4200 = -14p + 12600
or
56x = 16800 - 14p (relation between the unit price p and demand x)
b) For no consumers x = 0
thus, substituting in the relation we get
56 × 0 = 16800 - 14p
or
14p = 16800
or
p = $1200
c) For free , p = $0
on substituting in the above relation derived, we get
56x = 16800 - ( 14 × 0 )
or
x = 300 pounds
Angle A and Angle B are supplementary angles. The ratio of the measure of Angle A to the measure of Angle B is 5:4. Find the measures of Angle A and Angle B.
Measure of Angle A =
degrees.
Measure of Angle B =
degrees.
Answer:
Angle A = 100°
Angle B = 80°
Step-by-step explanation:
Supplementary angles sum 180°
Angle A to Angle B ratio is 5:4, you can write that ratio using a factor.
Angle A = 5x
Angle B = 4x
Since the sum is 180°
Angle A + Angle B = 180°
5x + 4x = 180°
9x = 180°
x = 20°
Replacing x = 20°
Angle A = 5(20°) = 100°
Angle B = 4(20°) 80°
Consider a colony of E.Coli bacteria that is growing exponentially. A microbiologist finds that, initially, 1,000 bacteria are present and 50 minutes later there are 10,000 bacteria. a) Find expression for the number of bacteria Q(t) after t minutes. b) When will there be 1,000,000 bacteria?
Answer: a) [tex]N(t) = 10^3\exp(0.046\frac{1}{min}t)[/tex]
b) 1,000,000 bacteria at t = 150 min
Step-by-step explanation:
Hi!!
A colony that grows exponentially has a number of bacteria:
[tex]N(t) = N_0 \exp(\lambda t)[/tex]
In this case at time t = 0:
[tex]N(0)=N_0=10^3[/tex]
We need to find the value of λ. We use the data:
[tex]N(t=50\;min)10^4 = 10^3\exp(\lambda \;50\;min)[/tex]
[tex]ln(10)=2.3=\lambda\;50\;min\\\lambda= \frac{0.046}{min}\\N(t) = 10^3\exp(\frac{0.046}{min}t)\\[/tex]
To find when there will be 1,000,000 bacteria:
[tex]10^6=10^3\exp(\frac{0.046}{min}t)[/tex]
[tex]\ln(10^3)=3\ln(10) = \frac{0.046}{min}t[/tex]
[tex]t = 150\;min [/tex]
In a 4-digit number, the first two digits are both 2. The sum of the ones and tens digits is14. What numbera are possible.
Answer:
2295, 2286, 2277, 2268, 2259
Step-by-step explanation:
We are dealing with a number of 4 digits, whose first two digits are 2's. So the number looks like [tex]2~2~ d_2 ~d_1[/tex] (where the last 2 digits are to be determined).
The exercise says that the sum of the ones and tens digits is 14. The ones digit is the last digit (the right most digit, which we are denoting by [tex]d_1[/tex]), and the tens digit is the second right most digit (which we are denoting by [tex] d_2[/tex]). So [tex] d_1+d_2=14[/tex]
Since they're digits, their only possible values are 0,1,2,3,4,5,6,7,8,9.
If d1 was 0, d2 would have to be 14 (since they should add up to 14), which is impossible.
If d1 was 1, d2 would have to be 13 (since they should add up to 14), which is impossible.
If d1 was 2, d2 would have to be 12, which is impossible.
And so going through all possibilities, we get that the only possible ones are:
[tex] d1=5~ and~ d_2=9[/tex]
[tex] d1=6~ and~ d_2=8[/tex]
[tex] d1=7~ and~ d_2=7[/tex]
[tex] d1=8~ and~ d_2=6[/tex]
[tex] d1=9~ and~ d_2=5[/tex]
And so the possible 4-digits numbers are 2295, 2286, 2277, 2268, 2259.
A bag contains four red marbles, two green ones, one lavender one, three yellows, and one orange marble. HINT (See Example 7.] How many sets of four marbles include none of the red ones?
Answer: 35
Step-by-step explanation:
Given : A bag contains four red marbles, two green ones, one lavender one, three yellows, and one orange marble.
Total = 4+2+1+3+1=11
To find sets of four marbles include none of the red ones, we need to exclude red marbles when we count the total number of marbles.
Then, the total marbles(exclude red) =11-4=7
Now, the combination of 7 marbles taking 4 at a time is given by :-
[tex]^7C_4=\dfrac{7!}{4!(7-4)!}=\dfrac{7\times6\times5\times4!}{4!3!}=35[/tex]
Hence, the number of sets of four marbles include none of the red ones = 35
The volume of a rectangular prism is
given by the formula: v=lwh, where v is
volume, h is height, w is width and 1 is
length Solve the formula for h.
Answer:
h = v/lw .
Step-by-step explanation:
v=lwh
Divide both sides by lw:
v / lw = h.
A laboratory tested 85 chicken eggs and found that the mean amount of cholesterol was 190 milligrams. Assume that the sample standard deviation is 11.7 milligrams. Construct a 95% confidence interval for the true mean cholesterol content, μ, of all such eggs. State your conclusion in a statistical sentence.
Answer: [tex](182.356,\ 197.644)[/tex]
Step-by-step explanation:
Given : Significance level : [tex]\alpha:1-0.95=0.05[/tex]
Sample size : n=85
Critical value : [tex]z_{\alpha/2}=1.96[/tex]
Sample mean : [tex]\overline{x}=190[/tex]
Standard deviation : [tex]\sigma=11.7[/tex]
The confidence interval for population mean is given by :-
[tex]\overline{x}\pm z_{\alpha/2}\dfrac{\sigma}{\sqrt{n}}\\\\=190\pm(1.96)\dfrac{11.7}{\sqrt{9}}\\\\=190\pm7.644\\\\=(190-7.644,\ 190+7.644)=(182.356,\ 197.644)[/tex]
Thus, the 95% confidence interval for the true mean cholesterol content, μ, of all such eggs = [tex](182.356,\ 197.644)[/tex]
Hence, we conclude that the true population mean of amount of cholesterol lies between 182.356 and 197.644.
A particular sale involves four items randomly selected from
alarge lot that is known to contain 10% defectives. Let Y denote
thenumber of defectives among the four sold. The purchaser of
theitems will return the defectives for repair, and the repair cost
isgiven by C = 3Y^2 + Y + 2. Find the expected repair cost.
Answer:
The expected repair cost is 3.96.
Step-by-step explanation:
Given :A particular sale involves four items randomly selected from a large lot that is known to contain 10% defectives.
The purchaser of the items will return the defectives for repair, and the repair cost is given by[tex]C = 3Y^2 + Y + 2[/tex]
To Find : Find the expected repair cost.
Solution:
We are given that A particular sale involves four items randomly selected from a large lot that is known to contain 10% defectives.
So, The probability of item being defected = 0.10
Let Y denote the number of defectives among the four sold.
It follows the binomial distribution.
n = 4 , p =0.10
[tex]E(Y)=np = 4 \times 0.10 =0.4[/tex]
[tex]V(Y)=np(1-p)=0.4(1-0.1)=0.36[/tex]
Now we know that [tex]V(Y)=E(Y^2)-[E(Y)]^2[/tex]
[tex]0.36=E(Y^2)-[0.4]^2[/tex]
[tex]0.36=E(Y^2)-0.16[/tex]
[tex]0.36+0.16=E(Y^2)[/tex]
[tex]0.52=E(Y^2)[/tex]
Now we are given an equation that represents the repair cost
[tex]C = 3Y^2 + Y + 2[/tex]
So, Expected repair cost = [tex]E(C) =E( 3Y^2 + Y + 2)[/tex]
[tex]E(C) =3E(Y^2) +E(Y) + 2[/tex]
[tex]E(C) =3 \times 0.52 +0.4+ 2[/tex]
[tex]E(C) =3.96[/tex]
Hence the expected repair cost is 3.96.
The expected number of defectives is 0.4, and using the formula, we find the expected repair cost to be 3.96 units.
To find the expected repair cost, we first need to determine the expected value of the number of defectives, denoted by Y. Since the probability of a defective item is 10% (or 0.1), Y follows a binomial distribution with parameters n = 4 and p = 0.1. The expected value of a binomial random variable is given by E(Y) = np. Hence, the expected number of defectives is E(Y) = 4 × 0.1 = 0.4.
The repair cost is given by the formula C = 3Y² + Y + 2. To find the expected repair cost, we need to calculate E(C). This involves finding E(3Y² + Y + 2).
Using the linearity of expectation:
E(C) = E(3Y² + Y + 2)E(C) = 3E(Y²) + E(Y) + E(2)E(C) = 3E(Y²) + 0.4 + 2We already have E(Y) = 0.4. Next, we need to compute E(Y²). For a binomial random variable, E(Y²) can be found using the formula E(Y²) = Var(Y) + [E(Y)]². The variance of a binomial random variable is given by Var(Y) = np(1-p). Thus, Var(Y) = 4 × 0.1 × 0.9 = 0.36.
Thus, E(Y²) = 0.36 + (0.4)² = 0.36 + 0.16 = 0.52.
Putting it all together:
E(C) = 3 × 0.52 + 0.4 + 2E(C) = 1.56 + 0.4 + 2E(C) = 3.96Therefore, the expected repair cost is 3.96 units.
Two simple statements are Connected with a AND? Youre Censtructing the truth table of this compound statement. How many rows does the truth table will have?
Answer:
A truth table should consider all possible truth values of its simple statements. In this case there are two simple statements, where each one of them can take true or false value, so each of the estatements needs two rows for their individual truth values and, therefore, the compound estatement requires 2x2 = 4 rows for its truth table.
Step-by-step explanation:
Answer:
4 Rows
Step-by-step explanation:
Since, the number of input given to the AND gate in terms of simple statement, the output of the AND gate will give output true if both the statements given to the AND gate will true otherwise it will show output false.
Let's see the truth table for the inputs of two statements
Statement 1 Statement 2 Output
False False False
False True False
True False False
True True True
As we can see the number of rows in the truth table of an AND gate having two input, will have 4 rows.
If $1900 earned simple interest of $56.28 in 6 months, what was the simple interest rate? The simple interest rate is % (Do not round until the final answer. Then round to the nearest tenth as needed.)
Answer:
5.9%.
Step-by-step explanation:
We are asked to find the simple interest rate for an amount of $1900 which earned simple interest of $56.28 in 6 months.
We will use simple interest formula to solve our given problem.
[tex]I=Prt[/tex], where,
[tex]I=\text{Amount of interest}[/tex]
P = Principal amount,
r = Interest rate in decimal form,
t = Time in years.
6 months equals 1/2 (0.5) year.
Substituting given values:
[tex]\$56.28=\$1900\cdot r\cdot 0.5[/tex]
[tex]\$56.28=\$950\cdot r[/tex]
[tex]\frac{\$56.28}{\$950}=\frac{\$950\cdot r}{\$950}[/tex]
[tex]0.059242=r[/tex]
Switch sides:
[tex]r=0.059242[/tex]
Convert in percentage:
[tex]0.059242\times 100\%[/tex]
[tex]5.9242\%\approx 5.9\%[/tex]
Therefore, the simple interest rate is approximately 5.9%.
To calculate the simple interest rate, the given values are substituted into the formula for simple interest, which is then re-arranged to solve for the interest rate.
Explanation:To calculate the simple interest rate, you can use the simple interest formula: I = Prt where I is the interest earned, P is the principal amount (the initial amount of money), r is the rate of interest and t is time.
In this context, you earned $56.28 in 6 months from an initial amount of $1900. Re-arranging the formula to solve for r (the interest rate) we get: r = I / (Pt).
Substituting the given values into the formula, we find: r = $56.28 / ($1900 * 0.5). Carry out the calculations and multiply the result by 100 to get the percentage. This will yield your simple interest rate.
Learn more about Simple Interest here:https://brainly.com/question/22621039
#SPJ3