Which acid is the strongest? pH = 0.5 pH = 2.0 pH = 3.5 pH = 5
Answer:
The most acidic or strongest acid is with pH equal to 0.5
Explanation:
The pH of the solution is defined as negative logarithm of [tex]H^+[/tex] concentration.
Mathematically can written as:
[tex]pH=-\log[H^+][/tex]
[tex]pH\propto \frac{1}{[H^+]}[/tex]
From the above expression we can see that pH of the solution is inversely related to the concentration of the [tex]H^+[/tex] ions.
This means that higher the concentration of [tex]H^+[/tex] ions in the solution higher will be pH and more acidic will be the solution.
So, from the given option the most acidic or strongest acid is with pH equal to 0.5 because the concentration [tex]H^+[/tex] ions is highest in this solution with respect to other solutions.
when sodium hydroxide is dissolved in water, energy is released as heat to the surroundings l, causing an increase in the solutions temperature. which of the following best describes this type of reaction?
a.- exothermic
b.- exothermic
c.- decomposition
d.- synthesis
Final answer:
The process of sodium hydroxide dissolving in water and releasing heat is best described as an exothermic reaction, as it involves the release of energy to the surroundings.
Explanation:
When sodium hydroxide (NaOH) is dissolved in water, it disassociates into sodium (Na+) and hydroxide (OH-) ions, releasing energy in the form of heat to the surroundings, and causing an increase in the temperature of the solution. This type of reaction, where energy is released, is best described as an exothermic reaction. These reactions are characterized by the release of heat and a rise in the temperature of the surroundings. Care must be taken when dissolving sodium hydroxide in water due to the significant amount of heat produced.
It is important to note that this is different from an endothermic reaction, where energy is absorbed from the surroundings, causing a decrease in temperature. The process of sodium hydroxide dissolving in water is not a decomposition reaction, as that involves a single compound breaking down into two or more simpler substances. It also does not fit the definition of a synthesis reaction, which involves combining simpler substances to form a more complex product.
Final answer:
The dissolution of sodium hydroxide in water, which releases heat and increases the solution's temperature, is an exothermic reaction.
Explanation:
When sodium hydroxide is dissolved in water and energy is released as heat, increasing the solution's temperature, this type of reaction is best described as exothermic. An exothermic reaction is characterized by the release of energy to the surroundings, often in the form of heat. As the sodium hydroxide (NaOH) dissolves, it disassociates into sodium (Na+) and hydroxide (OH-) ions, and the process releases a significant amount of heat, indicating that the solution becomes very basic and the temperature rises.
Calculate the mass of nitrogen dissolved at room temperature in a 80.0 l home aquarium. assume a total pressure of 1.0 atm and the mole fraction for nitrogen of 0.78. (the kh value for nitrogen in water is 6.1 x 10-4 m/atm.)
Final answer:
To calculate the mass of nitrogen dissolved in an 80.0 L aquarium, apply Henry's Law using the mole fraction and total pressure alongside the molar mass of N2, resulting in approximately 1.066 grams of dissolved nitrogen.
Explanation:
To calculate the mass of nitrogen dissolved in an 80.0 L home aquarium at room temperature, we consider the given total pressure of 1.0 atm and the mole fraction for nitrogen of 0.78. With the Henry's law constant (Kh) for nitrogen in water being 6.1 x 10-4 M/atm, we can determine the concentration of dissolved nitrogen first.
First, calculate the partial pressure of nitrogen (PN2) using the mole fraction and total pressure:
PN2 = mole fraction of N2 * total pressure = 0.78 * 1.0 atm = 0.78 atm
Next, apply Henry's Law to find the concentration of N2 in moles per liter (M):
Concentration of N2 = Kh * PN2 = 6.1 x 10-4 M/atm * 0.78 atm = 4.758 x 10-4 M
To find the total moles of N2 dissolved, multiply this concentration by the volume of the aquarium in liters:
Total moles of N2 = 4.758 x 10-4 M * 80.0 L = 0.038064 mol
Finally, to calculate the mass, we multiply the total moles by the molar mass of N2 (28.01 g/mol):
Mass of N2 = 0.038064 mol * 28.01 g/mol = 1.066 g
Count: electrons move around the nucleus of atoms in specific shells, shown by the rings around the atoms in the gizmo. the first ring holds two electrons, and the second holds eight. (electrons in the inner rings are not shown; you can assume these rings are full.)
a. observe the sodium and chlorine atoms. assuming that the inner rings are full of electrons, how many electrons are there total in each atom? sodium: ____________________ chlorine: ___________________
b. each atom is neutrally charged, which means that each atom has the same number of protons and electrons. based on this, how many protons are in each atom? sodium: ____________________ chlorine: ___________________
A neutrally charged atom has the same number of electrons and protons. Therefore, a sodium atom has 11 electrons and 11 protons, while a chlorine atom has 17 electrons and 17 protons.
Explanation:A given atom's electron count can be identified by looking at its atomic number because a neutrally charged atom has an equal amount of protons and electrons. Sodium has an atomic number of 11, which means it has 11 electrons if it is neutrally charged. Similarly, chlorine, with an atomic number of 17, has 17 electrons.
As stated, a neutrally charged atom has an equal number of protons and electrons. Thus, the proton count is also dictated by the atomic number. Sodium, therefore, has 11 protons, and chlorine will have 17 protons.
Learn more about Atomic Structure here:https://brainly.com/question/33054877
#SPJ3
Which element is most metallic in character? EXPLAIN YOUR REASONING
which element has the greatest atomic radius.
As
N
P
Sb
Answer : 'Sb' is the element which has the greatest atomic radius.
Explanation :
The general trend of the atomic radium of the element is that,
As we are going from left to right in a periodic table the atomic radius of the elements decreases and as we are going from top to bottom in a periodic table the atomic radius of the elements increases.
The given elements are the group 15 elements in which the 'Sb' is the element which has the greatest atomic radius as compared to N, P and As because as we are going from top to bottom in group 15 the the atomic radius of the elements increases that means the number of energy shells increases.
Hence, 'Sb' is the element which has the greatest atomic radius.
Is more chemical weathering likely to occur in New York location or in the Illinois location? Explain your answer. HELP NEEDED (Science)
The rate of disappearance of hbr in the gas phase reaction 2hbr(g)→h2(g)+br2(g) is 0.140 m s-1 at 150°c. the rate of appearance of h2 is ________ m s-1.
The reaction rate is the rate at which reactants convert to the product. The rate of appearance of hydrogen is [tex]\bold{ 0.070 ms^-^1}[/tex]
The given reaction,
[tex]\bold { 2HBr(g) \rightarrow H_2 (g)+Br_2(g)}[/tex]
2 moles of HBr degrade to form 1 mole of Hydrogen and 1 mole of bromine.
The rate of disappearance of HBr = 0.140 m [tex]\bold {s^-^1}[/tex]
Since the molar ratio between HBr and Hydrogen is 2:1.
So,
[tex]\bold{Ra(H_2) = \dfrac {Rd(HBr)} {2}}[/tex]
Where,
[tex]\bold{Ra(H_2)}[/tex] - Rate of appearance of Hydrogen
[tex]\bold{ Rd(HBr)}[/tex]- Rate of disappearance of HBr
Put the value,
[tex]\bold{Ra(H_2) = \dfrac {Rd(HBr)} {2}}\\\\\bold {Ra(H_2) = \dfrac {0.140 m/s} {2}}\\\\\bold { Ra(H_2) = 0.070 ms^-^1}[/tex]
Therefore, the rate of appearance of hydrogen is [tex]\bold{ 0.070 ms^-^1}[/tex].
To know more about the rate of reaction,
https://brainly.com/question/3334857
Which of the following atoms would have the greatest velocity if each atom had the same kinetic energy?
An atom would have the greatest velocity if each atom had the same kinetic energy is hydrogen. Therefore, option A is correct.
What do you mean by the kinetic energy ?The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. Once the job is finished, energy is transferred to the item, which then moves at a new, constant speed.
The reason molecules in gases have the largest kinetic energy is because they have greater space between one another, experience less intermolecular force, and travel at a faster rate, which results in higher energy.
The most kinetic energy is found in gases, whereas solids have the lowest. So, of the examples above, hydrogen has the largest kinetic energy.
Thus, option A is correct.
To learn more about the kinetic energy, follow the link;
https://brainly.com/question/15764612
#SPJ6
Your question is incomplete, most probably your question was
Which of the following atoms would have the greatest velocity if each atom had the same kinetic energy?
A. Hydrogen
B. Oxygen
C. Carbon
D. Sulfur
C2H4(g) + H2(g) mc009-1.jpg C2H6(g) + 137 kJ What happens to the amount of ethane (C2H6) when the temperature of the system is increased? The amount of ethane decreases. The amount of ethane increases initially and then decreases. The amount of ethane increases. The amount of ethane decreases initially and then increases.
Answer:
A) The amount of ethane decreases.
Explanation:
What happens when naoh is added to a buffer composed of ch3cooh and ch3coo−?
pH of buffer solution containing [tex]{\mathbf{C}}{{\mathbf{H}}_{\mathbf{3}}}{\mathbf{COOH}}[/tex] and [tex]{\mathbf{C}}{{\mathbf{H}}_{\mathbf{3}}}{\mathbf{COOH}}[/tex] does not change on addition of NaOH to the buffer.
Further explanation:
Buffer solution:
The aqueous solution that consists of weak acid and its conjugate base is known as buffer solution. Such solutions resist any change in their pH on addition of strong base or acid.
pH is used to determine acidity or basicity of solutions. Solutions with pH less than 7 are acidic in nature, those with pH 7 are neutral and those with pH more than 7 are basic.
Classification of buffers:
Acidic buffer:
Solutions of weak acid and its conjugate base with pH less than 7 are acidic. Mixture of acetic acid and sodium acetate is an example of acidic buffer.
Basic buffer:
Solutions of weak base and its conjugate acid with pH more than 7 are basic in nature. Mixture of ammonium chloride and ammonium hydroxide is an example of basic or alkaline buffer.
[tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{COOH}}[/tex] is a weak acid while NaOH is a strong base so these react with each other to form respective salt and water. Reaction between these two occurs as follows:
[tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{COOH}} + {\text{NaOH}} \to {\text{C}}{{\text{H}}_{\text{3}}}{\text{COONa}} + {{\text{H}}_{\text{2}}}{\text{O}}[/tex]
The salt formed by reaction of [tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{COOH}}[/tex] with NaOHis then dissociated to form its ions as follows:
[tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{COONa}} \rightleftharpoons {\text{C}}{{\text{H}}_{\text{3}}}{\text{CO}}{{\text{O}}^ - } + {\text{N}}{{\text{a}}^ + }[/tex]
Ionic identity [tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{CO}}{{\text{O}}^ - }[/tex] reacts with water to form uncharged [tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{COOH}}[/tex] again. Reaction for this is as follows:
[tex]{\text{CHCO}}{{\text{O}}^ - } + {{\text{H}}_{\text{2}}}{\text{O}} \rightleftharpoons {\text{C}}{{\text{H}}_{\text{3}}}{\text{COOH}} + {\text{O}}{{\text{H}}^ - }[/tex]
By going through above series of reactions, effect of addition of NaOH is neutralized by buffer containing [tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{COOH}}[/tex] and [tex]{\text{C}}{{\text{H}}_{\text{3}}}{\text{CO}}{{\text{O}}^ - }[/tex]. Hence pH of buffer solution does not undergo any change in it.
Learn more:
The mass of ethylene glycol: https://brainly.com/question/4053884 Basis of investigation for the scientists: https://brainly.com/question/158048Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Buffer solutions
Keywords: buffer solution, pH, CH3COOH, NaOH, CH3COO-, weak acid, strong base, acidic buffer, basic buffer, less than 7, more than 7, H2O, OH-, CH3COONa, reaction, conjugate base.
When parasites are found in food, the food has been exposed to _____ contamination.
Answer: Coli contamination/ E.coli contamination
Explanation:
When there are harmful substance in, whether microorganisms or chemicals in food which can cause adverse effects on animals, the term for it is called food contamination. Food contamination can be caused contamination by pathogenic bacteria, viruses, and protozoa.
One of the microorganisms that can be found in food and poses threat to animals life is the Escherichia coli. Escherichia is a bacteria. Naturallyy, the Escherichia coli can be found in animals(including humans) intestines. So, some kinds might be harmless.
While some are poisonous and cause food poisoning. Some of the symptoms include: pneumonia, diarrhea, respiratory illness and so on.
I WILL GIVE U BRAINLEST !!!!!!!!!!!!!!
Which part of a watershed is at the lowest elevation?
A.
divide
B.
boundary
C.
basin
D.
collection area
In an ecosystem, collection area is a part of a watershed which is at the lowest elevation.
What is an ecosystem?An ecosystem is defined as a system which consists of all living organisms and the physical components with which the living beings interact. The abiotic and biotic components are linked to each other through nutrient cycles and flow of energy.
Energy enters the ecosystem through the process of photosynthesis .Animals play an important role in transfer of energy as they feed on each other.As a result of this transfer of matter and energy takes place through the system .Living organisms also influence the quantity of biomass present.By decomposition of dead plants and animals by microbes nutrients are released back in to the soil.
Learn more about ecosystem,here:
https://brainly.com/question/1673533
#SPJ6
what kind of element has the greatest tendency to attract electrons?why?
The elements which has the greatest tendency to attract electrons are more electronegative. Elements like halogens, oxygen, nitrogen etc. are the most electronegative elements which easily attracts electrons.
What is electronegativity?The ability of an atomic nucleus to attracts its electrons and the bonded pair of electrons is called electronegativity. From left to right in periodic table electronegativity increases from metals to non-metals.
As the electronegativity increases, ionization energy of elements increases. Elements which are deficient of electrons needs to gain electrons to attain stability. According to octet law, as the valence shell fills 8 electrons the atom becomes stable.
Thus, the elements bonds with other elements to attain electrons for filling their octet. The more electronegative atoms attracts the bonded pair of electrons towards it and acquire a partial negative charge.
Halogens are more electronegative since they have seven valence electrons and thus need only one electron to attain octet. Thereby, there will be more tends to attract one electron. Similarly, oxygen, sulphur, nitrogen etc. are electronegative elements.
To find more on electronegativity, refer here:
https://brainly.com/question/17762711
#SPJ2
the closer an object is to the center of earth the ------------------ the gravitational force on that object
A greater
B less
these science
Answer:
Greater
Explanation:
According to the law of universal gravitation, the force of gravitation is directly proportional to the product of the masses of the two objects and INDIRECTLY proportional to the square of the distance. In short, the bigger the masses, the stronger the gravitational force, the lesser the distance between the two objects, the greater the gravitational force.
How many moles of CaCl2 have you delivered to the flask if you add 20.53mL of 0.511 M CaCl2 from the buret
We have that for the Question "How many moles of CaCl2 have you delivered to the flask if you add 20.53mL of 0.511 M CaCl2 from the buret" it can be said that no of moles of solute is
[tex]no of moles of solute=0.011[/tex]
From the question we are told
How many moles of CaCl2 have you delivered to the flask if you add 20.53mL of 0.511 M CaCl2 from the buret
Generally the equation for the morality is mathematically given as
[tex]M=\frac{no of moles of solute}{volume of solution litre}[/tex]
Therefore
[tex]The volume of CaCl_2 =\frac{20.53}{1000}[/tex]
Hence
no of moles of solute=molality*volume*solution
[tex]no\ of\ moles\ of\ solute=0.511*\frac{20.53}{1000}[/tex]
[tex]no of moles of solute=0.011[/tex]
For more information on this visit
https://brainly.com/question/23379286
Predict whether the compounds are soluble or insoluble in water.
Soluble
Insoluble
Generally, polar and ionic compounds are soluble in water, while non-polar compounds are insoluble. However, conclusively predicting a compound's solubility requires additional information about the compound.
Explanation:The solubility of compounds in water depends on the chemical nature of the compound. Generally, polar and ionic compounds are soluble in water due to its polar nature. This is because 'like dissolves like'. So, compounds such as sodium chloride, sugar, etc., are soluble in water.
On the other hand, non-polar compounds are usually insoluble in water. This includes many organic compounds like oils and fats.
However, the solubility of a compound can't be predicted with absolute certainty without additional information about the compounds' molecular structure, polarity, or the presence of functional groups.
Learn more about Solubility here:https://brainly.com/question/28170449
#SPJ12
The average atomic mass of oxygen is 15.9994 amu. The atomic masses of its three isotopes are as follows: O-16: 15.995 amu; O-17: 16.999 amu; O-18: 17.999 amu Which isotope is most likely to have the greatest abundance in nature? O–16 O–17 O–18 all three isotopes may be equally abundant
Answer: O-16
Explanation: To keep it short and sweet the answer is O-16
Which element's atomic radius increases the most in size when it becomes ionized? A. Sodium B. Chlorine C. Fluorine D. Lithium
2. List the layers of Earth from the center out to the crust. What is the composition of each layer?
What location around the world are volcanoes consistently found? Along plate boundaries National parks Continent-ocean boundaries Along the equator
The answer is continent ocean boundaries.
why might polar bears might become extinct A. they may drown when the glaciers melt B. too many people hunt them C. they do not have any predators D. their thick fur is not suited for a warming climate
They may drown when the glaciers melt is the cause of extinction of polar bears.
Reasons for extinction of polar bearsThe climate change is the main factor for extinction of polar bear. This climate change is responsible for melting and fragmention of sea ice across the Arctic, forcing more pregnant females to migrate to land. This fragmentation also causes the drowning of polar bears.
So we can conclude that They may drown when the glaciers melt is the cause of extinction of polar bears.
Learn more about extinct here: https://brainly.com/question/1048615
Answer:
Explanation:
A) Their thick fur is not suited for a warming climate.
The atomic number of gold (Au) is 79, and it has a mass number of 197. How many electrons are present in each atom of gold?
What is steam distillation and why is it a preferred technique to purify high boiling liquids that are water-insoluble?
Steam distillation is a separation process for temperature sensitive materials and it is used for purification of organic compounds.
The water vapor carries small amounts of the vaporized compounds (water and organic molecules) to the condensation flask. This is preferred technique because allows easy separation of the components by decantation or other suitable methods, because product od distilation is a two phase system of water and the organic distillate.
Steam distillation is a technique used to purify high boiling liquids that are water-insoluble. It involves introducing steam to vaporize the compound at a temperature lower than its normal boiling point, making the process efficient and preventing decomposition.
What is Steam Distillation?
Steam distillation is a variation of simple distillation technique that involves the use of steam or water in addition to the material to be distilled. The main purpose of utilizing steam is to facilitate the distillation of compounds that are water-insoluble and have high boiling points. When steam is introduced into the distilling flask, it helps in vaporizing the organic compound at a temperature lower than its normal boiling point. This process is ideal for purifying such substances because it reduces the risk of decomposition, which is often linked with the high temperatures required for distilling high boiling point liquids.
The distillation apparatus setup for this method is similar to that of simple distillation, with slight modifications to introduce steam into the system. There are two primary ways to add the steam: indirectly by connecting to a building's steam line, or directly by boiling water within the distillation flask itself.
Steam distillation is especially beneficial in separating and purifying volatile compounds from non-volatile impurities or substances with very high boiling points without decomposition. This method is not only used in laboratory settings but also has wide applications in industrial processes, such as the extraction of essential oils and the refinement of certain petrochemicals.
Treatment of an alpha,beta-unsaturated ketone with basic aqueous hydrogen peroxide yields an epoxy ketone. the reaction is specific to unsaturated ketones; isolated alkene double bonds do not react. on a sheet of paper, write a mechanism for the alkene to epoxide reaction. then, in the window below, draw the first intermediate in your mechanism.
If 17.4 mL of 0.800 M HCl solution are needed to neutralize 5.00 mL of a household ammonia solution, what is the molar concentration of the ammonia?
Answer: The concentration of ammonia is 2.784 M
Explanation:
To calculate the concentration of acid, we use the equation given by neutralization reaction:
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is [tex]HCl[/tex]
[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is ammonia
We are given:
[tex]n_1=1\\M_1=0.800M\\V_1=17.4mL\\n_2=1\\M_2=?M\\V_2=5.00mL[/tex]
Putting values in above equation, we get:
[tex]1\times 0.800\times 17.4=1\times M_2\times 5.00\\\\M_2=2.784M[/tex]
Hence, the concentration of ammonia is 2.784 M
The molar concentration of the household ammonia solution is 2.78 M.
Let's start by writing the neutralization reaction:
HCl (aq) + NH₃ (aq) → NH₄Cl (aq)
The number of moles of HCl required to neutralize the ammonia solution can be calculated from the volume and molarity of the HCl solution:
moles HCl = Molarity x Volume (in liters) = 0.800 M x 17.4 mL x (1 L / 1000 mL) = 0.01392 mol
Since the reaction is 1:1, the number of moles of NH₃ required to neutralize the HCl is also 0.01392 mol.
The molar concentration of the ammonia solution can be calculated from the number of moles and the volume of the solution:
Molarity = moles / volume (in liters) = 0.01392 mol / 5.00 mL x (1 L / 1000 mL) = 2.78 M
Therefore, the molar concentration of the household ammonia solution is 2.78 M.
Which of the following expands to fill the container it is in, but can be compressed to a smaller volume when pressure is applied
What is the name of this hydrocarbon
Answer : The name of the given hydrocarbon is, 2-methylpropane.
Explanation :
The basic rules for naming of organic compounds are :
First select the longest possible carbon chain.For the number of carbon atom, we add prefix as 'meth' for 1, 'eth' for 2, 'prop' for 3, 'but' for 4, 'pent' for 5, 'hex' for 6, 'sept' for 7, 'oct' for 8, 'nona' for 9 and 'deca' for 10.A suffix '-ane' is added at the end of the name of alkane.If two of more similar alkyl groups are present, then the words 'di', 'tri' 'tetra' and so on are used to specify the number of times these alkyl groups appear in the chain.In the given hydrocarbon, the longest possible carbon chain number is 3 that means we add prefix 'prop' and suffix '-ane' and a substituent present at 2nd position of the longest carbon chain. So, the name of given hydrocarbon will be, 2-methylpropane.
Hence, the name of the given hydrocarbon is, 2-methylpropane.
A certain material has a mass of 12.48 g while occupying 12.48 cm3 of space. What is this material?
Answer: The material is water as it has density of [tex]1g/cm^3[/tex]
Explanation:
Density is defined as the mass contained per unit volume. It is characteristic of a material.
[tex]Density=\frac{mass}{Volume}[/tex]
Given : Mass of object =12.48 grams
Volume of the object = [tex]12.48cm^3[/tex]
Putting in the values we get:
[tex]Density=\frac{12.48g}{12.48cm^3}[/tex]
[tex]Density=1g/cm^3[/tex]
Thus the density of the material is [tex]1g/cm^3[/tex] and material is water which has density of [tex]1g/cm^3[/tex].
Calculate the density of SO3 gas at STP. Show all work.