Consider the reaction between hydrogen gas and chlorine gas to form hydrogen chloride gas in a closed cylinder with a movable piston. H2(g) + Cl2(g) → 2 HCl(g) Predict what would happen to the reaction rate for a mixture containing both reactants if the following occur. (a) The pressure on the reaction mixture is increased at constant temperature (while keeping the reaction components in the gaseous phase).

Answer:

The dissociation equations for NaBr gives Na+ and Br-

The dissociation equations for ZnCl2 gives Zn2+ and 2 Cl-  

Explanation:

The following pictures shows that the dissociation of one particle of NaBr produces one particle of Na+ (sodium cation) and one particle of Br- (bromine anion).

The dissociation of one particle of ZnCl2 produces one particle of Zn+2 (Zinc cation) and two particles of Cl- (chlorine anion).

Answer:

Ea = 177x10³ J/mol

ko = [tex]1.52x10^{19}[/tex] J/mol

Explanation:

The specific reaction rate can be calculated by Arrhenius equation:

[tex]k = koxe^{-Ea/RT}[/tex]

Where k0 is a constant, Ea is the activation energy, R is the gas constant, and T the temperature in Kelvin.

k depends on the temperature, so, we can divide the k of two different temperatures:

[tex]\frac{k1}{k2} = \frac{koxe^{-Ea/RT1}}{koxe^{-Ea/RT2}}[/tex]

[tex]\frac{k1}{k2} = e^{-Ea/RT1 + Ea/RT2}[/tex]

Applying natural logathim in both sides of the equations:

ln(k1/k2) = Ea/RT2 - Ea/RT1

ln(k1/k2) = (Ea/R)x(1/T2 - 1/T1)

R = 8.314 J/mol.K

ln(2.46/47.5) = (Ea/8.314)x(1/528 - 1/492)

ln(0.052) = (Ea/8.314)x(-1.38x[tex]10^{-4}[/tex]

-1.67x[tex]10^{-5}[/tex]xEa = -2.95

Ea = 177x10³ J/mol

To find ko, we just need to substitute Ea in one of the specific reaction rate equation:

[tex]k1 = koxe^{-Ea/RT1}[/tex]

[tex]2.46 = koxe^{-177x10^3/8.314x492}[/tex]

[tex]1.61x10^{-19}ko = 2.46[/tex]

ko = [tex]1.52x10^{19}[/tex] J/mol

Answer: The number of moles of nitrogen gas is 0.505 moles.

Explanation:

To calculate the number of moles of nitrogen gas, we use ideal gas equation, which is:

[tex]PV=nRT[/tex]

where,

P = pressure of the gas = 4.27 atm

V = Volume of the gas = 2.96 L

T = Temperature of the gas = [tex]32.0^oC=[32.0+273]K=305K[/tex]

R = Gas constant = [tex]0.0821\text{ L. atm }mol^{-1}K^{-1}[/tex]

n = number of moles of gas = ?

Putting values in above equation, we get:

[tex]4.27atm\times 2.96L=n\times 0.0821\text{ L atm }mol^{-1}K^{-1}\times 305K\\n=0.505mol[/tex]

Hence, the number of moles of nitrogen gas is 0.505 moles.

Explanation:

The given data is as follows.

     Volume = 2.96 L,       Temperature = [tex]32.0^{o}C[/tex] = (32 + 273) K = 305 K,

        Pressure = 4.27 atm,       n = ?

And, according to ideal gas equation, PV = nRT

           [tex]4.27atm \times 2.96 L= n \times 0.0821 Latm/mol K \times 305K[/tex]    

                n = [tex]\frac{12.64 atm L}{25.04 Latm/mol}[/tex]

                         = 0.505 mol

Thus, we can conclude that the number of moles of nitrogen gas in the container is 0.505 mol.  

Answer:

11.39

Explanation:

Given that:

[tex]pK_{b}=4.82[/tex]

[tex]K_{b}=10^{-4.82}=1.5136\times 10^{-5}[/tex]

Given that:

Mass = 1.805 g

Molar mass = 82.0343 g/mol

The formula for the calculation of moles is shown below:

[tex]moles = \frac{Mass\ taken}{Molar\ mass}[/tex]

Thus,

[tex]Moles= \frac{1.805\ g}{82.0343\ g/mol}[/tex]

[tex]Moles= 0.022\ moles[/tex]

Given Volume = 55 mL = 0.055 L ( 1 mL = 0.001 L)

[tex]Molarity=\frac{Moles\ of\ solute}{Volume\ of\ the\ solution}[/tex]

[tex]Molarity=\frac{0.022}{0.055}[/tex]

Concentration = 0.4 M

Consider the ICE take for the dissociation of the base as:

                                  B +   H₂O    ⇄     BH⁺ +        OH⁻

At t=0                        0.4                          -              -

At t =equilibrium     (0.4-x)                        x           x            

The expression for dissociation constant is:

[tex]K_{b}=\frac {\left [ BH^{+} \right ]\left [ {OH}^- \right ]}{[B]}[/tex]

[tex]1.5136\times 10^{-5}=\frac {x^2}{0.4-x}[/tex]

x is very small, so (0.4 - x) ≅ 0.4

Solving for x, we get:

x = 2.4606×10⁻³  M

pOH = -log[OH⁻] = -log(2.4606×10⁻³) = 2.61

pH = 14 - pOH = 14 - 2.61 = 11.39

Answer:

The weight percent of NaBr is 25,7%

Explanation:

Molality is a way to express the concentration of a chemical in terms of moles of substances per kg of solution. Weight percent is other way to express concentration in terms of mass of substance per mass of solution per 100

Thus, to obtain weight percent you must convert moles of NaBr to grams with molar mass and these grams to kilograms, thus:

2,50 mol / kg solution × (102,9 g / 1mol) × (1 kg / 1000 g) =

[tex]\frac{0,257 kg NaBr}{kg solution }[/tex] × 100 = 25,7 % (w/w)

I hope it helps!

Answer : The formula of limiting reagent is, [tex]Mg_3N_2[/tex].

The mass of [tex]Mg(OH)_2[/tex] is, 174 grams.

The mass of excess reactant is, 36 grams.

Solution : Given,

Mass of [tex]Mg_3N_2[/tex] = 101 g

Mass of [tex]H_2O[/tex] = 144 g

Molar mass of [tex]Mg_3N_2[/tex] = 101 g/mole

Molar mass of [tex]H_2O[/tex] = 18 g/mole

Molar mass of [tex]Mg(OH)_2[/tex] = 58 g/mole

First we have to calculate the moles of [tex]Mg_3N_2[/tex] and [tex]H_2O[/tex].

[tex]\text{ Moles of }Mg_3N_2=\frac{\text{ Mass of }Mg_3N_2}{\text{ Molar mass of }Mg_3N_2}=\frac{101g}{101g/mole}=1moles[/tex]

[tex]\text{ Moles of }H_2O=\frac{\text{ Mass of }H_2O}{\text{ Molar mass of }H_2O}=\frac{144g}{18g/mole}=8moles[/tex]

Now we have to calculate the limiting and excess reagent.

The balanced chemical reaction is,

[tex]Mg_3N_2+6H_2O\rightarrow 3Mg(OH)_2+2NH_3[/tex]

From the balanced reaction we conclude that

As, 1 mole of [tex]Mg_3N_2[/tex] react with 6 mole of [tex]H_2O[/tex]

So, given 1 moles of [tex]Mg_3N_2[/tex] react with 6 moles of [tex]H_2O[/tex]

From this we conclude that, [tex]H_2O[/tex] is an excess reagent because the given moles are greater than the required moles and [tex]Mg_3N_2[/tex] is a limiting reagent and it limits the formation of product.

Now we have to calculate the moles of [tex]Mg(OH)_2[/tex]

From the reaction, we conclude that

As, 1 mole of [tex]Mg_3N_2[/tex] react to give 3 mole of [tex]Mg(OH)_2[/tex]

So, given 1 mole of [tex]Mg_3N_2[/tex] react to give 3 moles of [tex]Mg(OH)_2[/tex]

Now we have to calculate the mass of [tex]Mg(OH)_2[/tex]

[tex]\text{ Mass of }Mg(OH)_2=\text{ Moles of }Mg(OH)_2\times \text{ Molar mass of }Mg(OH)_2[/tex]

[tex]\text{ Mass of }Mg(OH)_2=(3moles)\times (58g/mole)=174g[/tex]

The mass of [tex]Mg(OH)_2[/tex] is, 174 grams.

Now we have to calculate the moles of excess reactant [tex](H_2O)[/tex].

Moles of excess reactant = 8 - 6 = 2 moles

Now we have to calculate the mass of excess reactant.

[tex]\text{ Mass of }H_2O=\text{ Moles of }H_2O\times \text{ Molar mass of }H_2O[/tex]

[tex]\text{ Mass of }H_2O=(2moles)\times (18g/mole)=36g[/tex]

The mass of excess reactant is, 36 grams.

Answer:

23.4 mph

Explanation:

The conversion factors are multiplied so that the units cancel out:

(100 meters / 9.58 sec) x (1 mile / 1609 meters) x (60 sec / min) x (60 min /1 hr) = 23.4 mph

Answer: The molecular formula of glucose is [tex]C_6H_{12}O_6[/tex]

Explanation:

We are given:

Empirical formula of the compound = [tex]CH_2O[/tex]

Empirical mass of the compound = [tex][(1\times 12)+(2\times 1)+(1\times 16)]=30g/mol[/tex]

For determining the molecular formula, we need to determine the valency which is multiplied by each element to get the molecular formula.

The equation used to calculate the valency is:

[tex]n=\frac{\text{Molecular mass}}{\text{Empirical mass}}[/tex]

We are given:

Mass of molecular formula = 180.12 g/mol

Mass of empirical formula = 30 g/mol

Putting values in above equation, we get:

[tex]n=\frac{180.12g/mol}{30g/mol}=6[/tex]

Multiplying this valency by the subscript of every element of empirical formula, we get:

[tex]C_{(1\times 6)}H_{(2\times 6)}O_{(1\times 6)}=C_6H_{12}O_6[/tex]

Hence, the molecular formula of glucose is [tex]C_6H_{12}O_6[/tex]

Answer:

8.125 atm

Explanation:

Hello,

Boyle's law states that at constant temperature:

[tex]P_1V_1=P_2V_2[/tex]

In this case:

[tex]P_1=1 atm, V_1=27.3L, V_2=3.36L[/tex]

Solving for [tex]P_2[/tex]:

[tex]P_2=\frac{P_1V_1}{V_2}=\frac{1atm*27.3L}{3.36L}\\P_2=8.125atm[/tex]

Best regards!

Final answer:

The importance of an energy balance in a chemical process facility lies in ensuring efficient energy use, maintaining safety, optimizing chemical processes for increased yield, and reducing environmental impact.

Explanation:

An energy balance is crucial in a chemical process facility because it ensures the efficient use of energy, minimizes waste, and helps maintain the safety of the operation. Since energy is neither created nor destroyed (law of conservation of energy), it's important to know where energy is being consumed and produced within chemical processes. This understanding allows engineers to optimize the process, increase the yield of the desired product, and reduce environmental impact by minimizing wasted energy and reducing unwanted by-products.

An energy balance aids in maintaining the operation within the desired range of conditions, preventing unsafe levels of energy which could lead to accidents. Moreover, certain reactions require specific amounts of energy to produce raw materials or to synthesize products, and tracking energy use is essential for economic and environmental reasons.

Answer:

The correct answer is option a.

Explanation:

Diffusion flux is defined as movement of mas of atoms diffusing through the unit area in per unit time.It measured in ([tex]kg/m^2 s[/tex]).

[tex]J=\frac{1}{A}\frac{dM}{dt}[/tex]

J = diffusion flux

A = Unit area A through which atoms moves.

M = mass of atoms passes in t interval of time.

Diffusion flux is the mass of gas passing through a unit surface area per unit time, influenced by the concentration gradient, surface area, and particle travel distance.

The diffusion flux can be defined as the amount of gas passing through a given area over a unit of time. Therefore, the correct answer is a) Mass, per unit surface area, per unit time. The rate of diffusion is dictated by several factors such as the concentration gradient, the surface area available for diffusion, and the distance the gas particles must travel. In addition, it's important to note that the time required for diffusion is inversely proportional to the diffusion rate.

https://brainly.com/question/33792345

#SPJ12

Answer:

salt mass=102.5gCrCl3.6H2O

Explanation:

Hello !

To know how much CrCl3.6H2O we need, we follow the steps below

First we have to know what the mass of the compound is

Cr = 52g / mol

Cl = 35.5g / mol

H = 1g / mol

O = 16g / mol

We calculate the mass

52+ (35.5 * 3) + 6 * (2 * 1 + 16) = 266.5g

We have 20g Cr, so we calculate the amount of salt:

20gCr * (266.5g salt / 52gCr) = 102.5gCrCl3.6H2O

salt mass=102.5gCrCl3.6H2O

Answer:

The molarity of a 6.0 mole% sulfuric acid solution is 2.8157 Molar.

Explanation:

Suppose there are 100 moles in solution:

Moles of sulfuric acid = 6% of 100 moles = 6 moles

Mass of 6 moles of sulfuric acid = 6 mol × 98 g/mol=588 g

Moles of water = 100%- 6% = 94%= 94 moles

Mass of water = 94 mol × 18 g/mol = 1692 g

Specific gravity of the solution ,S.G= 1.07

Density of solution = D

[tex]S.G=\frac{D}{d_w}[/tex]

[tex]d_w[/tex] = density of water = 1 g/mL

[tex]D=S.G\times d_w=1.07\times 1 g/mL=1.07 g/mL[/tex]

Mass of the solution = 588 g + 1692 g = 2280 g

Volume of the solution = V

Volume = [tex]\frac{Mass}{Density}[/tex]

[tex]=\frac{2280 g}{1.07 g/mL}=2130.84 mL=2.13084 L[/tex]

1 mL = 0.001 L

[tex]Molarity = \frac{n}{V(L)}[/tex]

n = number of moles of compound

V = volume of the solution in L

here we have ,n = 6 moles of sulfuric acid

V = 2.13084 L

So, the molarity of the solution is :

[tex]Molarity=\frac{6 mol}{2.13084 L}=2.8157 mol/L[/tex]

Explanation:

(a)   According to the mole concept, 1 mole of an atom contains [tex]6.022 \times 10^{23}[/tex] atoms.

Hence, number of atoms present in [tex]4.48 \times 10^{-23}[/tex] g will be as follows.

                 [tex]4.48 \times 10^{-23} \times 6.022 \times 10^{23}[/tex]

                 = 26.97 g

or,              = 27 g

This means that 1 mole of aluminium atoms contain 27 g.

(b)     Mass of air plane is 5000 kg of [tex]5000 \times 1000 g[/tex] (as 1 kg = 1000 g).

As mass of 1 mole aluminium is calculated as 27 g and mass of air plane is given as 5000000 g.

Therefore, calculate the number of moles of aluminium atoms as follws.

               No. of moles of Al atoms = [tex]\frac{\text{mass of small air plane}}{\text{mass of 1 mol Aluminium}}[/tex]

                                             = [tex]\frac{5000000g}{27 g}[/tex]

                                              = 185185.18

So, the answer in three significant digits will be 185000 moles of aluminum atoms have a mass equal to the mass of a small airplane.

The study of chemicals and bonds is called chemistry. There are two types of elements and these are metals and nonmetals.

The correct answer is described below

According to the question, the answer of the first question is:-

The number of atoms will be:-

[tex]4.48*10^{-23}*6.022*10^{23}\\\\=26.97[/tex]

The correct answer is 27

The answer to the second question is as follows:-

The mass of the air is [tex]5000*1000g[/tex]. hence, As the mass of 1-mole aluminum is calculated as 27 g and mass of airplane is given as 5000000 g.

No moles will be

:- [tex]\frac{500000}{27} \\\\=185185.18[/tex]

Hence, the correct answer is mentioned above.

For more information about the moles, refer to the link:-

https://brainly.com/question/16759172

Answer:

6.113 atm

Explanation:

Data provided in the question:

Molarity of the solution = 0.25 M

Temperature, T = 25° C = 25 + 273 = 298 K

Now,

Osmotic pressure (π) is given as:

π = MRT

where,

M is the molarity of the solution

R is the ideal gas constant = 0.082057 L atm mol⁻¹K⁻¹

on substituting the respective values, we get

π = 0.25 × 0.082057 × 298

or

π = 6.113 atm

Answer:

ΔHf = 3301 kJ/mol

Explanation:

The standard enthalpy of formation of a compound is the change of enthalpy during the formation of 1 mole of the substance from its constituent elements, with all substances in their standard states.

In a reaction ΔHf = ∑ n ΔHproducts - ∑ n ΔHreagents

Where n are moles

For the reaction:

1 C₆H₆ + 7.5 O₂ → 6 CO₂ + 3 H₂O

The ΔHf = -285,8 kJ/mol × 3 - 393,5 kJ/mol×6 - [82,6 kJ/mol×1 -0kJ/mol×7,5]

ΔHf = 3301 kJ/mol

I hope it helps!

Answer:

397 g

Explanation:

From the information given in the question ,

the atomic mass of X = 12 ,

and , the atomic mass of Y = 1 .

For the molecular formula , X₇Y₁₁ , the molecular mass is given as -

X₇Y₁₁ = 7 * atomic mass of X  +  11 *  atomic mass of Y

         = 7 * 12 + 11 * 1

         = 84 + 11  = 95 g / mol

Hence , molecular mass of X₇Y₁₁ = 95 g / mol .

Moles is denoted by given mass divided by the molecular mass ,

Hence ,

n = w / m

n = moles ,

w = given mass ,

m = molecular mass .

From question ,

moles n = 4.18 mol

and ,

m = molecular mass of X₇Y₁₁ = 95 g / mol .

To find the mass of the compound X₇Y₁₁   , the above formula can be used , and putting the respective values ,

n = w / m  

4.18 = w / 95

w = 4.18 * 95 = 397 g

Answer:

a) pH = 2,23

b) pH = 3,26

c) pH = 3,74

d) pH = 7,98. Here we have the equivalence point of the titration

Explanation:

In a titration of a strong base (NaOH) with a weak acid (HCOOH) the reaction is:

HCOOH + NaOH → HCOONa + H₂O

a) Here you have just HCOOH, thus:

HCOOH ⇄ HCOO⁻ + H⁺ where ka =1,8x10⁻⁴ and pka = 3,74

When this reaction is in equilibrium:

[HCOOH] = 0,200 -x

[HCOO⁻] = x

[H⁺] = x

Thus, equilibrium equation is:

1,8x10⁻⁴ = [tex]\frac{[x][x] }{[0,200-x]}[/tex]

The equation you will obtain is:

x² + 1,8x10⁻⁴x - 3,6x10⁻⁵ = 0

Solving:

x = -0,006090675 ⇒ No physical sense. There are not negative concentrations

x = 0,005910674

As x = [H⁺] and pH = - log [H⁺]

pH = 2,23

b) Here, it is possible to use:

HCOOH + NaOH → HCOONa + H₂O

With adition of 5,00 mL of 1,00M NaOH solution the initial moles are:

HCOOH = [tex]0,100 L.\frac{0,200 mol}{L} =[/tex] = 2,0x10⁻² mol

NaOH = [tex]0,005 L.\frac{1,00 mol}{L} =[/tex] = 5,0x10⁻³ mol

HCOO⁻ = 0.

In equilibrium:

HCOOH = 2,0x10⁻² mol - 5,0x10⁻³ mol = 1,5x10⁻² mol

NaOH = 0 mol

HCOO⁻ = 5,0x10⁻³ mol

Now, you can use Henderson–Hasselbalch equation:

pH = 3,74 + log [tex]\frac{5,0x10^{-3} }{1,5x10^{-2} }[/tex]

pH = 3,26

c) With adition of 10 mL of 1,00M NaOH solution the initial moles are:

HCOOH = [tex]0,100 L.\frac{0,200 mol}{L} =[/tex] = 2,0x10⁻² mol

NaOH = [tex]0,010 L.\frac{1,00 mol}{L} =[/tex] = 1,0x10⁻² mol

HCOO⁻ = 0.

In equilibrium:

HCOOH = 2,0x10⁻² mol - 1,0x10⁻² mol = 1,0x10⁻² mol

NaOH = 0 mol

HCOO⁻ = 1,0x10⁻² mol

Now, you can use Henderson–Hasselbalch equation:

pH = 3,74 + log [tex]\frac{1,0x10^{-2} }{1,0x10^{-2} }[/tex]

pH = 3,74

d) With adition of 20 mL of 1,00M NaOH solution the initial moles are:

HCOOH = [tex]0,100 L.\frac{0,200 mol}{L} =[/tex] = 2,0x10⁻² mol

NaOH = [tex]0,020 L.\frac{1,00 mol}{L} =[/tex] = 2,0x10⁻² mol

HCOO⁻ = 0.

Here we have the equivalence point of the titration, thus, the equilibrium is:

HCOO⁻ + H₂O ⇄ HCOOH + OH⁻ kb = kw/ka where kw is equilibrium constant of water = 1,0x10⁻¹⁴; kb = 5,56x10⁻¹¹

Concentrations is equilibrium are:

[HCOOH] = x

[HCOO⁻] = 0,1667-x

[OH⁻] = x

Thus, equilibrium equation is:

5,56x10⁻¹¹ = [tex]\frac{[x][x] }{[0,01667-x]}[/tex]

The equation you will obtain is:

x² + 5,56x10⁻¹¹x - 9,27x10⁻¹³ = 0

Solving:

x = -9,628361x10⁻⁷⇒ No physical sense. There are not negative concentrations

x = 9,627806x10⁻⁷

As x = [OH⁻] and pOH = - log [OH⁻]; pH = 14 - pOH

pOH = 6,02

pH = 7,98

I hope it helps!

Answer:

a.

silver iodide BC

manganese(II) hydroxide A

b.

silver iodide Ksp = S²

manganese(II) hydroxide Ksp = 4S³

Explanation:

Ksp (Solubility products) are the equilibrium constants for poorly soluble compounds. As every equilibrium constant, it is formed by the product of the products raised to their stoichiometric coefficients divided by the product of reactants raised to their stoichiometric coefficients. We only include in the constant gases and aqueous species. So, to solve this task, we need to write each reaction and its Ksp.

1. Silver Iodide

AgI(s) ⇄ Ag⁺(aq) + I⁻(aq)

When AgI is put in water, the concentration of Ag⁺ and I⁻ that actually dissolve is known as solubility (S). So the concentration of both Ag⁺ and I⁻ would be S.

AgI(s) ⇄ Ag⁺(aq) + I⁻(aq)

                 S             S

We can replace this in the Ksp expression:

Ksp = [Ag⁺].[I⁻] = S.S = S²

We can follow the same steps to find out the relationship between Ksp and S for each compound.

2. Mn(OH)₂(s) ⇄ Mn²⁺(aq) + 2OH⁻(aq)

                                S             2S

In this case, the concentration of OH⁻ is 2S because 2 moles are produced along with 1 mole of Mn²⁺.

Ksp = [Mn²⁺].[OH⁻]² = S.(2S)² = 4S³

A. Fe(OH)₂(s) ⇄ Fe²⁺(aq) + 2OH⁻(aq)

                              S              2S

Ksp = [Fe²⁺].[OH⁻]² = S.(2S)² = 4S³

B. CaSO₃(s) ⇄ Ca²⁺(aq) + SO₃²⁻(aq)

                             S              S

Ksp = [Ca²⁺].[SO₃²⁻] = S.S = S²

C. NiCO₃(s) ⇄  Ni²⁺(aq) + CO₃²⁻(aq)

                            S              S

Ksp = [Ni²⁺].[CO₃²⁻] = S.S = S²              

D. Ba₃(PO₄)₂(s) ⇄ 3 Ba²⁺(aq) + 2 PO₄³⁻(aq)

                                   3S              2S

Ksp = [Ba²⁺]³.[PO₄³⁻]²= (3S)³.(2S)²= 108S⁵

a. The salts that can be compared using the same Ksp expressions are:

silver iodide BC

manganese(II) hydroxide A

b.

silver iodide Ksp = S²

manganese(II) hydroxide Ksp = 4S³

None of the listed salts can be compared to silver iodide using Ksp values. Manganese(II) hydroxide can be compared to Fe(OH)2. The Ksp expressions in terms of solubility, s, are s^2 for silver iodide and 4s^3 for manganese(II) hydroxide.

We can directly compare salts by considering their solubility product constants, or Ksp values

. 1. Silver iodide: No salts on the right share the same ions with silver iodide, so none can be directly compared.
2. Manganese(II) hydroxide: It contains Mn2+ and OH- ions. Thus, it can be compared to the Fe(OH)2 salt which contains Fe2+ and OH- ions, making the matching answer A.

For the solubility expressions for each salt, when Multiplied we put the number first and then combine all exponents:

For silver iodide (AgI), the equilibrium is AgI ↔ Ag+ + I-, so the Ksp expression is Ksp = s x s = s^2.

For manganese(II) hydroxide (Mn(OH)2), the equilibrium is Mn(OH)2 ↔ Mn2+ + 2OH-, so the Ksp expression is Ksp = 4s^3.

https://brainly.com/question/1419865

#SPJ11

Answer:

[tex]t=5.84\times 10^{-5}s[/tex]

Explanation:

[tex]ln(\frac{A}{B})=-kt[/tex]

or, [tex]t=\frac{1}{-k}\times ln(\frac{A}{B})[/tex]

Now plug-in all given values:

[tex]t=\frac{1}{-4.80\times 10^{4}s^{-1}}\times ln(\frac{1.00\times 10M}{1.65\times 10^{2}M})[/tex]

So, [tex]t=5.84\times 10^{-5}s[/tex]

Answer:

single bond

Explanation:

Single bond is the chemical bond in which 2 valence electrons are involved. These are the sigma bond which are formed formed by the head-on overlapping between the orbitals of the two atoms involving in the bond. The bond lies on the inter nuclear axis and thus , the bond can be rotated without the breaking of bond.

On the other hand, double and triple bonds contains one sigma bond and also bonds which are formed by the sideways overlapping of the orbitals and thus, these do not lie on inter nuclear axis and breaks on rotation.

Answer:

(a) more than

Explanation:

Conduction:

Transfer of heat due to direct contact between two mediums at different temperatures, without having any of the bodies traveling. Therefore, conduction heat transfer occurs by the transfer of momentum (molecular) from always the same group of molecules in one medium to another group of molecules in another medium.

Example: Heat transfer INSIDE a solid.

Convention:

Transfer of heat or mass due to at least one traveling medium, where the transfer of momentum is not bounded anymore to the same groups of molecules. Molecules moving to transfer their momentum and keep flowing to the next group, also allowing other molecules behind to do the same. Example: heat transfer by the wind.

Hence, the Mass transfer rate in convection is more than mass transfer in conduction

Final answer:

The mass transfer rate in convection is generally more than (option a) that in conduction due to the macroscopic movement of mass that facilitates faster heat transfer.

Explanation:

The question asks to compare the mass transfer rate in convection to the mass transfer rate in conduction. The correct comparison is that the mass transfer rate in convection is generally more than the mass transfer rate in conduction. This is because conduction is the process by which heat is directly transmitted through a substance when there is a difference of temperature, without movement of the material. In contrast, convection involves the movement of mass (typically a fluid such as air or water) which contributes to a faster transfer of heat. An empirical equation for the rate of heat transfer by forced convection can be represented by Q/t = hA(T₂ – T₁), showing that this rate is dependent on the temperature difference (T₂ – T₁), contact surface area (A), and the convective heat transfer coefficient (h).

Answer:

20.7

Explanation:

20.7298014 rounded off to 3 sig fig =20.7

Answer:

At the equivalence point of the titration of a monoprotic weak acid with a strong base: B. the moles of strong base added must equal the moles of weak acid.

Explanation:

In every titration, the equivalence point is defined as the point where the moles of the titrant and analyte are equal. For every acid-base titration, the equivalence point is defined as the point where the moles of the base is equal to the moles of the acid.

If the solutions of the acid and base are at a different concentration the volume added from the buret will not be the same as the volume of the analyte.

Answer:

The correct option is: E. No precipitate will form.

Explanation:

A solubility chart refers to the list of solubility of various ionic compounds. It shows the solubility of the various compounds in water at room temperature and 1 atm pressure.

Also, according to the solubility rules, the salts of chlorides, bromides and iodides are generally soluble and mostly all salts of sulfate are soluble.

Since, all the compounds formed in this double replacement reaction are soluble in water. Therefore, no precipitate will be formed.

ZnSO₄ (aq) + MgCl₂ (aq) → ZnCl₂ (aq) + MgSO₄ (aq)    

Answer:

The concentration of chloride ions in the final solution is 3 M.

Explanation:

The number of moles present in a solution can be calculated as follows:

number of moles = concentration in molarity * volume

In 100 ml of a 2 M KCl solution, there will be (0.1 l * 2mol/l) 0.2 mol Cl⁻

For every mol of CaCl₂, there are 2 moles of Cl⁻, then, the number of moles of Cl⁻ in 50 l of a 1.5 M solution will be:

number of moles of Cl⁻ = 2 * number of moles of  CaCl₂

number of moles of Cl⁻ = 2 ( 50 l * 1.5 mol / l ) = 150 mol Cl⁻

The total number of moles of Cl⁻ present in the solution will be (150 mol + 0.2 mol ) 150.2 mol.

Assuming ideal behavior, the volume of the final solution will be ( 50 l + 0.1 l) 50.1 l. The molar concentration of chloride ions will be:

Concentration = number of moles of Cl⁻ / volume

Concentration = 150.2 mol / 50.1 l = 3.0 M

To find the molar concentration of chloride ions in the solution, calculate the moles of chloride ions in each solution and add them together, then divide by the total volume of the final solution.

To determine the molar concentration of chloride ions in the solution, we need to calculate the number of moles of chloride ions and divide it by the total volume of the solution.

First, calculate the moles of chloride ions in KCl solution:

Moles of chloride ions = molarity of KCl solution * volume of KCl solution

Next, calculate the moles of chloride ions in CaCl2 solution:

Moles of chloride ions = (molarity of CaCl2 solution * volume of CaCl2 solution) * 2 (since CaCl2 has 2 chloride ions per formula unit)

After finding the moles of chloride ions in each solution, add them together and divide by the total volume of the final solution to get the molar concentration of chloride ions.

https://brainly.com/question/31973745

#SPJ11

Answer: Option (d) is the correct answer.

Explanation:

According to Bronsted-Lowry an acid is defined as the specie which is able to donate hydrogen ions when dissolved in water.

For example, [tex]HCl \rightarrow H^{+} + Cl^{-}[/tex]

On the other hand, bases are the species which are able to donate hydroxide ions when dissolved in water.

For example, [tex]NaOH \rightarrow Na^{+} + OH^{-}[/tex]

Thus, we can conclude that a definition of an acid is that it donates H ions when dissolved in water.

Answer: Work done for the process is -390 J

Explanation:

The chemical equation for the reaction of zinc metal with sulfuric acid follows:

[tex]Zn+H_2SO_4\rightarrow ZnSO_4+H_2[/tex]

To calculate the number of moles, we use the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]

Given mass of zinc = 10.0 g

Molar mass of zinc = 65.38 g/mol

Putting values in above equation, we get:

[tex]\text{Moles of zinc}=\frac{10.0g}{65.38g/mol}=0.153mol[/tex]

The equation given by ideal gas follows:

[tex]P\Delta V=nRT[/tex]

where, P = pressure of the gas

[tex]\Delta V[/tex] = Change in volume of the gas

T = Temperature of the gas = 298 K

R = Gas constant = 8.314 J/mol.K

n = number of moles of gas = 0.153 mol

Putting values in above equation, we get:

[tex]P\Delta V=0.153mol\times 8.314J/mol.K\times 298K\\\\P\Delta V=397J[/tex]

To calculate the work done, we use the equation:

[tex]\text{Work done}=-P\Delta V\\\\W=-390J[/tex]

Hence, work done for the process is -390 J

Answer:

(a) Pressure at point 200 m downstream: 113.4 kPa

(b) Pressure at point 200 m downstream: 105.4 kPa

Explanation:

The point of reference, that will be named Point A, is the pressure gage.

The point 200 m downstream will be named Point B.

With a slope of 1:50, the height difference between A and B is (1/50)*200=4m.

(a) In the case there is no friction losses, we can write

[tex]p_a+\frac{\rho V^2}{2} +\rho*g*h_a=p_b+\frac{\rho V^2}{2} +\rho*g*h_b[/tex]

Because ther is no change in the diameter of the pipe, V=constant.

Rearranging

[tex]p_a+\rho*g*h_a=p_b+\rho*g*h_b\\\\\Delta p = \rho * g * \Delta h\\\\\Delta p = 0.8505 * 1000\frac{kg}{m^3} *9.81\frac{m}{s^2}*4 m\\\\ \Delta p = 33.373.62 kg/(m*s^2)=33.373.62 Pa=33.4 kPa[/tex]

Then we have an increase in of 33.4 kPa, and pressure in Point B (downstream) is:

[tex]p_b=p_a+\Delta p = 80 kPa + 33.4 kPa = 113.4 kPa[/tex]

(b) If we consider 10% of the total initial head as friction loss, we have

[tex]p_a+\rho*g*h_a=p_b+hf +\rho*g*h_b\\\\hf=0.1*p_a\\\\\Delta P = \rho*g*\Delta h-0.1*p_a\\\\\Delta P = 0.8505*1000 kg/m^3*9.81m/s2*4m-0.1*80kPa\\\\\Delta P = 33.4kPa-8kPa=25.4kPa[/tex]

In this case the rise in pressure is 25.4 kPa, due to the friction losses.

The pressure at point B is

[tex]p_b=p_a+\Delta p = 80 kPa + 25.4 kPa = 105.4 kPa[/tex]

Answer:

It's an open system, tranfering heat through a rigid, diathermal wall and matter through an imaginary and permeable wall, and it is not at steady state.

Explanation:

I hope you find interesting and useful this information! good luck!