Dalton’s theory was identified using light microscope images of atoms. the experimental results of other scientists. water vapor and air experiments.

Answers

Answer 1

Answer:

C

Explanation:

Answer 2

Answer:

It is C.

Because of his theory water turns into air of a process called evaporation.

And im giving credit to the guy above his awswer


Related Questions

Derek reads a rate of 25 words per min. How long would it take him to read a 225 work article if he read at a constant rate without stopping

Answers

Hello there! Your answer is (255/25=9) hope it helps and have a wonderful day!

please help me :)
A Ferris wheel at a carnival has a diameter of 62 feet. Suppose it turns at a rate of 70 revolutions per hour.
(a) Find the angular speed of the wheel in radians per hour.
(b) Find the linear speed of a passenger in feet per minute.

Do not round any intermediate computations, and round your answer to the nearest whole number.,

Answers

(a) Angular Speed is 140π radians per hour.

(b) The linear speed of a passenger on the Ferris wheel is approximately 3.249 feet per minute.

To find the angular speed of the Ferris wheel in radians per hour, you can use the following formula:

Angular Speed (ω) = (2π * Number of Revolutions) / Time

(a) Angular Speed in Radians per Hour:

Number of Revolutions = 70 revolutions

Time = 1 hour

ω = (2π * 70) / 1

ω = 140π radians per hour

Now, to find the linear speed of a passenger in feet per minute, you need to consider the circumference of the Ferris wheel.

(b) Circumference of the Ferris Wheel:

The diameter of the Ferris wheel is given as 62 feet, so the radius (r) is half of that, which is 31 feet. The circumference (C) of the wheel is given by:

C = 2πr

C = 2π * 31 feet

C ≈ 194.94 feet

Now, to find the linear speed (v) in feet per minute, you can use the formula:

Linear Speed (v) = (Circumference / Time)

Time in this case is 1 hour, which is equivalent to 60 minutes:

v = 194.94 feet / 60 minutes

v ≈ 3.249 feet per minute

Hence, the linear speed of a passenger on the Ferris wheel is approximately 3.249 feet per minute.

To know more about Angular Speed here

https://brainly.com/question/29058152

#SPJ3

When the current is the same through all of the resistors and the batteries of a circuit, you have resistors in __.
A. parallel
B. series
C. both parallel and series
D. series and parallel circuits

Answers

its series cause parallel would be if one would be off and it will still be on. All of them are the same so its a series.

When the current is the same through all the resistors and the batteries of a circuit, you have resistors in series. Option B is correct.

What is series circuit?

In the series circuit, the amount of current flowing through any component in a series circuit is the same and the sum of the individual resistances equals the overall resistance of any series circuit.

The voltage in a series circuit, the supply voltage, is equal to the total of the individual voltage drops.

Components linked in series share a single “electrical route,” and each component receives the same current, which is equal to the network's current.

When the current is the same through all the resistors and the batteries of a circuit, you have resistors in series.

Hence,option B is correct.

To learn more about the series circuit, refer to the link;

https://brainly.com/question/11409042

#SPJ2

In the following diagram, the voltage is 1.5 volts and the resistance is 6.0 ohms. Use Ohm's law to determine the current in the circuit.
A)0.25 amps
B)
4.0 amps
C)
6.0 amps
D)
9.0 amps                     
                                HELP ASAP on a test 

Answers

Voltage (v) = current (i) × resistance(r)
Solving for current (i):
[tex]i = \frac{v}{r} = \frac{1.5}{6} \\ i = 0.25 \: amps[/tex]
A) 0.25 amps

The current in the circuit from the voltage 1.5 V and the resistance 6 ohm is 0.25 ampere. Thus, option A is correct.

What is Ohm's law?

Ohm's law is defined as the current flow in the circuit is directly proportional to the applied voltage in the circuit. Ohm's law is applicable at a constant temperature.

V∝I, where V is the potential difference and I is the current. Ohm's law can also be defined as, V = IR, and R is the resistance of the circuit. The unit of current is ampere(A).

Resistance is defined as the obstruction in current flow and the unit of resistance is ohm(Ω). Resistance is inversely proportional to the current flow. Resistance increases with the decrease of current and vice-versa.

From the given,

Voltage(V) = 1.5 V

Resistance (R) = 6 Ω

Ohm's law, V = IR

V / R = I

I = 1.5 / 6

= 0.25 A

I = 0.25 ampere

Thus, the current flow in the circuit is 0.25 A. Hence, the ideal solution is option A.

To learn more about Ohm's law:

https://brainly.com/question/1247379

#SPJ3

the mass of a proton is 1.6726 * 10^-24 and the mass of a electron is 9.1093 * 10^-28. What is the difference between the mass of a proton and the mass of an electron?

Answers

Answer:

Its C

Explanation:

1.6735 × 10–27

A 33.0 g iron rod, initially at 22.7 ∘c, is submerged into an unknown mass of water at 63.3 ∘c, in an insulated container. the final temperature of the mixture upon reaching thermal equilibrium is 58.5 ∘c. part a what is the mass of the water? express your answer to two significant figures and include the appropriate units.

Answers

When the iron and the water reach thermal equilibrium, they have same temperature, [tex]T=58.5^{\circ}C[/tex].
We can consider this as an isolated system, so the heat released by the water is equal to the heat absorbed by the iron.

The hear released by the water is:
[tex]Q_w =m_w C_{sw} \Delta T_w[/tex]
where [tex]m_w[/tex] is the water mass, [tex]C_{sw}=4.186 J/(g^{\circ}C)[/tex] is the specific heat of the water, and [tex]\Delta T_w = 63.6^{\circ}-58.5^{\circ}=5.1^{\circ}C[/tex] is the variation of temperature of the water.

Similarly, the heat absorbed by the iron is:
[tex]Q_i = m_i C_{si} \Delta T_i[/tex]
where [tex]m_i = 33.0 g[/tex] is the iron mass, [tex]C_{si}=0.444 J/(g^{\circ}C)[/tex] is the iron specific heat, and [tex]\Delta T_i = 58.5^{\circ}-22.7^{\circ}=35.8^{\circ}C[/tex] is the variation of temperature of the iron.

Writing [tex]Q_w=Q_i[/tex] and replacing the numbers, we can solve to find mw, the mass of the water:
[tex]m_w= \frac{m_i C_{si} \Delta T_i}{C_{sw} \Delta T_w} =24.6 g[/tex]

If red and yellow paint are mixed together, which color of light will be reflected?

A. Orange
B. Red
C. White
D. Black

Answers

the answer is A. it will make orange
The correct answer is: Option (A) Orange

Explanation:
When two or more colors mixed together, the color of light that is reflected back represents the equivalent color for the different colors you mixed. Let's take white color as an example. If you mixed up all the color of the light spectrum, you will get the white color (which is reflected). Likewise, when red and yellow paints are mixed together, it is the orange color that is reflected. Hence the correct option is (A) Orange.

If a car goes along a straight road heading east and speeds up from 45ft/s to 60ft/s in 5s , calculate the acceleration

Answers

acceleration = change in velocity/ time = (final velocity - initial velocity)/time 

accel = (60ft/s - 45ft/s)/5s = 3 ft/s

In order to effectively radiate a radio signal, an antenna must be at least one-half the wavelength of transmission in length, i.e., minimum antenna height = 1/2(λ). WITY operates at a frequency of 980.0 kHz. What is the minimum height (m) of the antenna that WITY (nostalgia radio) must have?,

Answers

The equation that relates Wavelength & frequency of electromagnetic waves is : Velocity (c) = Wavelength (λ) * frequency (f) ------ (1) Electromagnetic wave velocity (c) = Speed of Light = 3 * 10^8 m/s From (1), Wavelength , λ = c / f λ= (3*10^8)/(980*10^3) λ = 306.12 m Minimum height of the antenna for effective transmission = λ * 0.5 = 306.12*0.5 Answer : 153 m (rounded off)

The wavelength of the is the distance of corresponding points between the two consecutive waves.

The minimum height (m) of the antenna that WITY (nostalgia radio) must have is 153.06 meters.

What is the wavelength?

The wavelength of the is the distance of corresponding points between the two consecutive waves.

It can be given as,

[tex]\lambda=\dfrac{c}{f}[/tex]

Here [tex]c[/tex] is the speed of light and [tex]f[/tex] is the frequency of the wave.

Given information-

The minimum height of the antenna is 1/2(λ).

The frequency on which the radio operates is 980.0 kHz.

As the speed of light is [tex]3\times 10^8\rm m/s[/tex]. Thus, find the value of wavelength using the above formula first,

[tex]\lambda=\dfrac{3\times 10^8\rm}{980\times10^3}\\\lambda=306.122\rm m[/tex]

Suppose the minimum height of the antenna is x meters. As the minimum height of the antenna is 1/2(λ). Thus,

[tex]x=\dfrac{1}{2} \times306.122\\x=153.06[/tex]

Hence, the minimum height (m) of the antenna that WITY (nostalgia radio) must have is 153.06 meters.

Learn more about the minimum height of antenna here;

https://brainly.com/question/12186124

Peter and Paul both had a great influence on the early church. True False

Answers

I think answer should be False! Because Peter and Paul it doesn't had a great influence on their church.

Hope it helped!

Answer:

The answer would be TRUE

Peter and Paul did have a great influence on the early church.

A motorboat, whose speed in still water is 15 km/hour, traveled with the current of a river for 35 km, and against the current for 25 km. the boat took the same time traveling with the current as it did traveling against the current. what is the speed of the current in the river?

Answers

Let's call v=15 km/h the speed of the boat in still water, and c the speed of the current.
When the boat travels with the current, its total speed is (v+c), and it travels for a distance of 35 km in a time t. When the boat travels against the current, its total speed is (v-c), and it travels for a distance of 25 km in the same time t. We can write the basic relationship of the uniform linear motion [tex]S=vt[/tex] for both situations:
[tex]35 km = (v+c)t[/tex]
[tex]25 km=(v-c)t[/tex]
If we divide the first equation by the second one, we find
[tex] \frac{35}{25}= \frac{v+c}{v-c} [/tex]
and by rearranging this, we can find the value of c, the speed of the current:
[tex]c= \frac{1}{6}v= \frac{1}{6}(15 km/h)=2.5 km/h [/tex]

Sound waves require a medium to travel through, such as a solid, liquid or gas because A) waves cannot move through a vacuum. B) sound only works within certain pressures. C) waves only work within certain temperatures. D) sound is molecules bumping into one another. Eliminate

Answers

Sound waves require a medium to travel through, such as a solid,
liquid or gas because sound travels by means of molecules bumping
into one another. (D)

D) sound is molecules bumping into one another.

Explanation:

Sound waves are longitudinal waves generated by the vibrations of the molecules  of a medium. These oscillations occur in a direction parallel to the direction of propagation of the wave (longitudinal wave), so basically the wave is transmitted by the collisions between the molecules of the medium, and therefore D. is the correct answer. Morevoer, these oscillations create regions of higher density of molecules (called compressions) and regions of lower density of molecules (called rarefactions).

A 10.0 cm object is 5.0 cm from a concave mirror that has a focal length of 12 cm. What is the distance between the image and the mirror?

Answers

Let's use the mirror equation to solve the problem:
[tex] \frac{1}{f}= \frac{1}{d_o}+ \frac{1}{d_i} [/tex]
where f is the focal length of the mirror, [tex]d_o[/tex] the distance of the object from the mirror, and [tex]d_i[/tex] the distance of the image from the mirror.
For a concave mirror, for the sign convention f is considered to be positive. So we can solve the equation for [tex]d_i[/tex] by using the numbers given in the text of the problem:
[tex] \frac{1}{12 cm}= \frac{1}{5 cm}+ \frac{1}{d_i} [/tex]
[tex] \frac{1}{d_i}= -\frac{7}{60 cm} [/tex]
[tex]d_i = -8.6 cm[/tex]
Where the negative sign means that the image is virtual, so it is located behind the mirror, at 8.6 cm from the center of the mirror.
The answer is -8.6 cm

A 1.80 m radius playground merry-go-round has a mass of 120 kg and is rotating with an angular velocity of 0.330 rev/s. what is its angular velocity, in rev/s, after a 27.5 kg child gets onto it by grabbing its outer edge? the child is initially at rest.

Answers

Final answer:

To find the final angular velocity of the merry-go-round after the child gets on it, we use the conservation of angular momentum. By setting the initial and final angular momenta equal, we can solve for the final angular velocity. The final angular velocity is found to be approximately 0.301 rev/s.

Explanation:

To find the angular velocity of the merry-go-round after the child gets on it, we need to consider the conservation of angular momentum. The initial angular momentum of the system is equal to the final angular momentum after the child grabs the outer edge. The initial angular momentum of the system is calculated as the product of the moment of inertia of the merry-go-round and its initial angular velocity. The final angular momentum is calculated as the sum of the moment of inertia of the merry-go-round and the child and the final angular velocity.

Let's denote the initial angular velocity of the merry-go-round as ω1, the final angular velocity as ω2, the moment of inertia of the merry-go-round as I1, the moment of inertia of the child as I2, the radius of the merry-go-round as R, the mass of the merry-go-round as M, and the mass of the child as m.

The initial angular momentum is given by:

L1 = I1 * ω1

And the final angular momentum is given by:

L2 = (I1 + I2) * ω2

Setting the initial and final angular momenta equal, we have:

I1 * ω1 = (I1 + I2) * ω2

Rearranging the equation, we can solve for ω2:

ω2 = (I1 * ω1) / (I1 + I2)

Substituting the given values, we have:

ω2 = (120 kg * (1.80 m)^2 * 0.330 rev/s) / ((120 kg * (1.80 m)^2) + (27.5 kg * (1.80 m)^2))

Simplifying the expression, we can calculate the final angular velocity:

ω2 ≈ 0.301 rev/s

Learn more about angular velocity here:

https://brainly.com/question/30733452

#SPJ11

A horizontal pull A pulls two wagons over a horizontal frictionless floor, the first wagon is 500N, the second is 2000 N. The tension in the light horizontal rope connecting the wagons is.

help explain your answer,

Answers

The force will be zero if the wagons are moving at a constant speed (i.e. not accelerating), as there is no frictional force to overcome. If the wagons are accelerating, the force will be proportional to the acceleration, and 20% of the force applied by A.

What is necessary for a substance to be a conductor of electricity?

Answers

The main requirement for a good conductor of electricity is to have a lot of valence electrons. Valence electrons are the electrons of the outer shells of atoms not bound with other atoms (for example through covalent bounds). These electrons are "free to escape" as soon as an electric field with enough intensity is applied to the material, and therefore these electrons will be free to move in the material producing an electric current.

This is an area of the Solar System located between the orbits of the Mars and Jupiter. It is occupied by numerous irregularly shaped rocky bodies.

Answers

Isn't this the asteroid belt? Also home to the dwarf planet Ceres

What’s the force of a pitching machine on a baseball? Baseballs pitched by a machine have a horizontal velocity of 30 meters/second. The machine accelerates the baseball from 0 meters/second to 30 meters/second in 0.5 seconds. If a baseball has a mass of 0.15 kilograms, the force the machine exerts is newtons. Use F = ma, where  .

Answers

The acceleration of the baseball is:
[tex]a= \frac{v_f-v_i}{\Delta t} [/tex]
where [tex]v_f[/tex] and [tex]v_i[/tex] are the final and initial speed of the ball, and [tex]\Delta t[/tex] is the time interval in which the force acted.

Replacing the numbers, we get
[tex]a= \frac{30 m/s-0m/s}{0.5 s}=60 m/s^2 [/tex]
And at this point, we can use Newton's second law F=ma to find the value of the force of the pitching machine:
[tex]F=ma=(0.15 kg)(60 m/s^2)=9 N[/tex]

Answer:

So F=ma

The acceleration of the baseball is:

where  and  are the final and initial speed of the ball, and  is the time interval in which the force acted.

Replacing the numbers, we get

And at this point, we can use Newton's second law F=ma to find the value of the force of the pitching machine:

The three classes of rocks are sedimentary, metamorphic, and igneous. How are rocks classified into one of these three groups? A. According to the type of minerals present in the rock B. According to how many times they have been through the rock cycle C. According to the method of their formation D. According to the amount of weathering they have endured Rese

Answers

Hello,

Here is your answer:

The proper answer to this question is option C "According to the method of their formation".

Here is how:

Scientist's figure out what type it is due to the method they use to figure out what type of rock it is.

Your answer is C.

If you need anymore help feel free to ask me!

Hope this helps! 

the answer is C. according to the method of their information

What is absolute zero? A. Zero on the Celsius scale B. The point at which all motion stops C. Zero on the Fahrenheit scale D. 273 on the Kelvin scale

Answers

Absolute zero is B. the point at which all motion stops. This is equivalent to 0 Kelvin.
Final answer:

Absolute zero is the theoretical lowest temperature at which all molecular motion stops. It's equivalent to -273.15 degrees Celsius or 0 Kelvin.

Explanation:

Absolute zero refers to the lowest possible temperature that can be theoretically achieved. It represents the point at which all molecular motion is presumed to stop, which is choice B in your options. However, this doesn't mean that all forms of energy disappear at this temperature - quantum mechanics tells us that minimal vibrations persist even at this extreme. In practical terms, absolute zero is equivalent to -273.15 degrees Celsius, or 0 on the Kelvin scale (not 273 Kelvin as option D suggests). Neither 0 degrees on the Celsius scale (option A), nor 0 degrees on the Fahrenheit scale (option C), is equivalent to absolute zero.

Learn more about Absolute Zero here:

https://brainly.com/question/14327817

#SPJ12

Is it accurate to describe the physical universe as composed of only matter and energy?
Plz explain , many thanks!

Answers

The universe is composed of roughly 71% dark energy, 24% dark matter, and 5% atoms. Dark matter is not fully understood, and is thought to be composed of one or more species of sub-atomic particles.

What is one way you can destroy a magnet’s magnetism? a. by putting it in water b. by cooling it c. by heating it d. by breaking it into pieces

Answers

By heating it up is the answer


the answer is C LOLOLO

What is the average power output of a weight lifter who can lift 260 kg from the floor to a height of 1.60 m in 1.7 seconds?

Answers

The power P is the amount of work W done in a certain amount of time t
[tex]P= \frac{W}{t} [/tex]
For the law of conservation of energy, the amount of work done by the lifter is equal to the difference in gravitational potential energy of the block of mass [tex]m=260 kg[/tex] between its final location (height h=1.60 m) and its initial location (the floor, h=0). This potential energy difference is 
[tex]\Delta U = mgh_f-mgh_0 =(260 kg)(9.81 m/s^2)(1.60 m)-0=4081 J[/tex]

And therefore, the average power output of the lifter, using [tex]t=1.7 s[/tex], is
[tex]P =\frac{W}{t}= \frac{4081 J}{1.7 s}=2400 W [/tex]

Elements can be broken down through ____ processes.

A. Chemical processes, but not nuclear
B. only biological
C. both chemical and nuclear
D. Nuclear processes, but not chemical

Answers

The answer is D. Nuclear processes, but not chemical

Answer: I believe the answer is: Nuclear processes, but not chemical

Explanation:

Question 1 Unsaved
Most of the mass of the solar system is located in which of the following?

Question 1 options:

Earth


comets


sun


Jupiter

Answers

sun is the biggest mass in the ss

Answer:

The Sun

Explanation:

Did the test, k12

In which labeled portion of the curve would you use the heat of vaporization to calculate the heat absorbed? (image attached inside!)

1, 2, 3, 4, or 5

**not sure :( Thank you!!

Answers

In the labeled portion of the curve ,you use the heat of vaporization to calculate the heat absorbed in the 4th portion. It is indicated in the picture that it is the region where vaporization occurs, that is why you need to consider this portion to calculate.

The answer is 4 but idk how to get it so can somebody please explain how to get it

Answers

How much gravitational potential energy does the block have
when it gets to the top of the ramp ?

      (weight) x (height) = (15 N) x (0.2 m)  =  3 Joules .

If there were no friction, you would only need to do 3 Joules of work
to lift the block from the bottom to the top.

But the question says you actually have to do 4 Joules of work
to get the job done.

Friction stole one of your Joules along the way.

Choice-4 is not the correct one.
Choice-1 is the correct one.

===========================

Notice that the mass of the block is NOT  15 kg , and you
don't have to worry about gravity to answer this question.

The formula for potential energy is  (m)·(g)·(h) .
But (m·g) is just the WEIGHT, and the formula
is actually (weight)·(height).
The question GIVES us the weight of the block . . . 15 N .
So the potential energy at the top is just (15N)·(0.2m) = 3 Joules.

Jamal does not produce enough insulin to regulate his blood sugar. What part of the endocrine system is most likely being affected??

A. Adrenal gland
B. Pancreas
C. Pituitary gland
D. Testes

Answers

B pancreas, since the pancreas secretes insulin.
B- the pancreas is the answer

You have been mining for gold and you have found a nugget and are about to be rich. The density of the gold is 19.3 grams/cubic centimeter or g/cc.
Your sample has a mass of 972 grams and is nearly a perfect cube, each side measuring 3 cm.
Find the the density of your sample (HINT: you must find the volume of the cube first).
After you've done this compare the given density of gold to your calculated value. Is your sample pure gold? EXPLAIN.

Answers

volume= 3^3= 27cm3
density= mass/volume
972/27 = 36g/cm3
the Desity of gold is it's property, and it's given as 19.3
but what we got is 36
so there is a change in density
which means that gold is not pure here.

If the Earth and distant stars were stationary (motionless) in space, what would we observe about the wavelength from these stars?

A.Wavelengths measured would match the actual wavelengths emitted.
B.Wavelengths measured would be shorter than the actual wavelengths emitted.
C.Wavelengths measured would be longer than the actual wavelengths emitted.

If a star is moving toward us in space, what would we observe about the wavelength from these stars?

A.Wavelengths measured would be shorter than the actual wavelengths emitted.

B.Wavelengths measured would match the actual wavelengths emitted.

C.Wavelengths measured would be longer than the actual wavelengths emitted.

Answers

1) In the first case, the correct answer is
A.Wavelengths measured would match the actual wavelengths emitted.
In fact, the stars are not moving relative to Earth, so there is no shift in the measured wavelength.

2) In this second case, the correct answer is
A.Wavelengths measured would be shorter than the actual wavelengths emitted.
in fact, since the stars in this case are moving towards the Earth, then apparent frequency of their emitted light will be larger than the actual frequency, because of the Doppler effect, according to the formula:
[tex]f'= \frac{c}{c+v_s} f_0 [/tex]
where f0 is the actual frequency, f' the apparent frequency, c the speed of light and vs the velocity of the source (the stars) relative to the obsever (Earth). Vs is negative when the source is moving towards the observer, so the apparent frequency f' is larger than the actual frequency f0. But the wavelength is inversely proportional to the frequency, so the apparent wavelength will be shorter than the actual wavelength.
Other Questions
How many 1/100 are in 3/10 Based on what you have read, explain the advantages of digital signals over analog signals. Mercutio and benvolio are concerned because tybalt has challenged romeo to a duel. mercutio then makes a joke and says that romeo is already dead. how has romeo died' according to him? how many moles are there in 78.3g of CO2? n the 1960s, new evidence helped support the theory of continental drift and change it into the theory of plate tectonics. What was this new evidence? Nolan bought 26 yards of rope, the rope costs 2 dollars per foot, how much did Nolan play for the rope? what is the volume of the rectangular pyramidA.360B.540C.720D.1080 Why does the monster see himself as different from Adam? A.Adam is placed in charge of nature, whereas the monster is a victim of the natural world. B.Adam has generational links to other people on Earth, whereas the monster has no link to any human. C.Adam's body was filled with strength and health, whereas the monster's body was physically weak and unhealthy. D.Adam came into the world happy and protected, whereas the monster entered the world confused and alone. Find the value of x so that line m is parallel to line n.A. 57B. 51C. 50D. 49 Who was the chinese reformer who became president of china in 1911? Someone please help?? :(Julie started with Newton's second law of motion. She drew a free-body diagram of an inclined plane experiment. She derived an equation for the acceleration down the inclined plane and determined how it would change if she changed the angle of the incline. From there she was able to derive an equation to find the coefficient of friction of any material on the inclined plane.In the scenario, how did Julie determine her findings on the coefficient of friction?a. inductive reasoningb. deductive reasoning from a valid principlec. deductive reasoning from an invalid principle, what was the climate in ancient greece what is the analogie for wasp the city is planning to build a new park by enlarging the current park by a scale factor of 4. The current park has an area of 37,625 yd squared. what is the area of the new park The baroque system of figured bass allowed the performer to _____. Suppose today is Friday,what day of the week will be 65 days from now? How does studying science help you be a better member of society? (1 point) A. Learning the biases of science will help you know what is right or wrong.B. Understanding how science works will help you make better decisions C. Memorizing science facts will help you become more intelligent.D. Knowing science will help you live without the aid of technology. PLEASE HELP !!! how did Father De Mora use slaves to mine gold? Call a household prosperous if its income exceeds $100,000. call the household educated if the householder completed college. select an american household at random, and let a be the event that the selected household is prosperous and b the event that it is educated. according to a survey, p(a) = 0.132, p(b) = 0.227, and the probability that a household is both prosperous and educated is p(a andb.= 0.082. what is the conditional probability that a household is prosperous, given that it is educated? (round your answer to four decimal places.) .3612 explain why your result shows that events a and b are not independent. if a and b were independent, then p(a|b) would equal p(a), and p(a andb.would equal the product p(a)p(b). if a and b were independent, then p(a|b) would equal p(a), and p(a andb.would equal the sum p(a) + p(b). if a and b were independent, then p(a|b) would equal p(a and b), and p(a andb.would equal the product p(a)p(b). if a and b were independent, then p(a|b) would equal p(b), and p(a andb.would equal the product p(a)p(b). if a and b were independent, then p(a|b) would equal p(b), and p(a andb.would equal the sum p(a) + p(b). submit answer save progress The main issue debated during the second continental congress was whether foreign allies would be beneficial. a. True b. False