Data were collected on recent releases that includes the gross (in millions of dollars), the budget (in millions of dollars), the run time (in minutes), and the score given by critics on a review aggregation website. A regression model is constructed to predict the gross. The accompanying scatterplot shows Gross vs. Budget. What (if anything) does this scatterplot tell about the following Assumptions and Conditions for the regression?
a) Linearity condition
b) Equal Spread condition
c) Normality assumption
Answers
Answer:
The plot is attached.
a) Linearity Condition:
an upward pattern is seen in the dissipate plot. All the focuses are plotted near one another demonstrating that the relationship is solid. Henceforth I can say that there is a solid positive straight connection among spending plan and gross. As the estimation of spending builds, the estimation of gross likewise increments.
Truly, the plot is sensibly honest without any Bends.
b) Equal Spread Condition:
to check the suspicion of equivalent spread condition, a lingering plot is required. A remaining plot is plotted with the free factor on the x-pivot and the lingering esteems on the y-hub. In the event that the remaining plot has arbitrary focuses, I can say that the difference is consistent. As such, a leftover plot with irregular focuses is said to follow the presumption of fairness of difference.
For this situation, the leftover plot isn't appeared, consequently there is inadequate data to check the equivalent spread condition.
c) Normality Condition:
Another presumption of relapse examination is the suspicion of ordinariness of residuals. This presumption can be checked with the assistance of PP plot. A PP plot with S shape shows that the suspicion of ordinariness of residuals is followed.
For this situation, there is inadequate data to check the typicality presumption in light of the fact that the PP plot isn't given.
Related Questions
The American Cancer Society has been sending letters soliciting donations for years. When they added pre-printed address labels personalized as a gift to the receiver of the solicitation, donation levels went up by 30%. Which principle of social influence explains this phenomenon best? (choose only one answer) Note your answers on scratch paper in case your browser or internet crashes.
A. Reciprocity
B. Social proof
C. Authority
D. Liking
E. Scarcity
Answers
Answer:
The answer is option option A) The principle of social influence explains this phenomenon best is the principle of Reciprocity.
Explanation:
The principle of reciprocity is a popular social law of psychology that portrays the need to give to get.
It states that "in many social situations we pay back what we received from others".
Every body has a need. even the potential donors with all their wealth need validation every now and then
Therefore, taking on a reciprocity approach by the American Cancer Society by adding pre-printed address labels personalized as a gift to the receiver of the solicitation met the need for validation among potential donors which made their donation levels go up by 30%.
Answer:
Reciprocity
Explanation:
Reciprocity is defined as the act of giving a thing of value to someone which in turn results in the other party giving back also.
For example when a person recieves a gift he will naturally want to reciprocate the gesture.
The American Cancer Society added pre-printed address labels personalized as a gift to the receiver of the solicitation, donation levels went up by 30%.
This is an action that pushed recipients of solicitation to donate more.
Wood Designs Company, a custom cabinet manufacturing company, is setting standard costs for one of its products. The main material is cedar wood, sold by the square foot. The current cost of cedar wood is $ 5 per square foot from the supplier. Delivery costs are $ 0.25 per board foot. Carpenters' wages are $ 20 per hour. Payroll costs are $ 3.00 per hour and benefits are $ 7 per hour. How much is the direct materials cost standard (per square foot)?
Answers
Answer:
$5.25 per unit
Explanation:
The reason is that the direct cost are those costs that can be calculated very easily and are directly attributable to a single unit. In this case, we are finding direct material cost which would include all the material costs that are used to make a single unit which includes delivery of material $0.25 and material purchase cost of $5 per square foot. So the total direct material cost is $5.25.
LCD Industries purchased a supply of electronic components from Entel Corporation on November 1, 2016. In payment for the $25.0 million purchase, LCD issued a 1-year installment note to be paid in equal monthly payments at the end of each month. The payments include interest at the rate of 24%. (FV of $1, PV of $1, FVA of $1, PVA of $1, FVAD of $1 and PVAD of $1) (Use appropriate factor(s) from the tables provided.)
Required:
1. & 2.
Prepare the journal entries for LCDâs purchase of the components on November 1, 2016 and the first installment payment on November 30, 2016. (Enter your answers in whole dollars. If no journal entry is required for a transaction, select "No journal entry required" in the first account field.)
3.
What is the amount of interest expense that LCD will report in its income statement for the year ended December 31, 2016?. (Enter your answers in whole dollars.)
Answers
Answer:
We will use the following equations for this problem
a. (Initial cost Estimated output) × Actual yearly output
b. (Depreciable cost Yearly output) × Estimated output
c. Depreciable cost Yearly output
d. (Depreciable cost Estimated output) × Actual yearly output
Journal entries are used to record the purchase and payment transactions of electronic components by LCD Industries. The initial purchase creates a liability, and installment payments include both interest and principal. The annual interest expense is calculated based on monthly installments.
The transaction for purchasing electronic components and issuing an installment note can be recorded through journal entries. On November 1, 2016, when LCD Industries purchases the components, the journal entry would debit Inventory (or the appropriate asset account for the electronic components) and credit Notes Payable for the full purchase amount of $25.0 million, reflecting the liability created by the note. The first installment payment, however, requires a more complex entry because it includes both principal repayment and interest expense.
The amount of the monthly installment can be calculated using the formula for an installment loan:
monthly payment = P x [i(1+i)^n] / [(1+i)^n - 1]. Here, P is the principal amount ($25 million), i is the monthly interest rate (24% annual rate divided by 12 months, or 0.02 monthly), and n is the total number of payments (12). We would calculate the monthly payment and then for the first payment on November 30, 2016, debit Notes Payable and Interest Expense and credit Cash for the total payment amount. As the payment includes both the principal and interest, the specific amounts need to be calculated.
For the interest expense in the income statement, we would calculate the monthly interest component of each installment and then multiply by the number of payments made within the year, to get the annual interest expense for 2016.
Some consumers like to buy products on-line, some consumers don't. Do YOU like to shop and buy on-line? Think about your opinion of on-line shopping and your experiences buying on-line. Is there a product that you would prefer/always buy on-line? What is it and why do you like buying it on-line? Is there a product that you would NOT/never buy online? What is it and what's your concern about buying it on-line?
Answers
Answer to Question 1:
I'm am indifferent. Sometimes I shop online for convenience.
In my experience however, getting my products and or purchases and the best price possible and at the best quality possible prevails over convenience as sometimes, people courier orders which are completely different from what was requested.
Answer to Question 2:
Of course, I could purchase books, data, and other products whose quality and quantity cannot be manipulated in anyway.
Answer to Question 3 & 4:
I would never purchase cooked food online.
I once purchased grilled fish online only to discover that it was not properly cooked on the inside. The interior of the fish was raw with blood in it. It was disgusting.
Cheers!
Assume that Product Z is made of two units of A and three units of B. A is made of three units of C and four of D. D is made of two units of E Lead times for purchase or fabrication of each unit to final assembly are: Z takes two weeks; A, B, C, and D take one week each; and E takes three weeks. Sixty eight units of Product Z are required in Period 10. (Assume that there is currently no inventory on hand of any of these items.) b. Develop an MRP planning schedule showing gross and net requirements and order release and order receipt dates.
Answers
Answer and explanation:
a). The product structure tree is as given in the attached image 1
Z
A B
C D
E
b) The MRP schedule are also attached in the subsequent images
An MRP schedule for Product Z requires backward calculation from the due date, considering lead times of Z, A, B, C, D, and E to determine when each component needs to be ordered or manufactured. E needs to be ordered by Period 4, components of A by Period 7, and the assembly of Product Z starts by Period 8.
Explanation:To develop an MRP (Material Requirements Planning) schedule for Product Z, given the consumption rates and lead times for each component and sub-component, we must work backward from the due date for Product Z. The lead times indicate how long before the due date each component and sub-component must be ordered or manufactured to ensure timely completion.
Product Z requires two units of A and three units of B.Component A is composed of three units of C and four of D.Component D requires two units of E for completion.Now, considering the lead times:
Product Z takes two weeks to assemble.Components A, B, C, and D each take one week.Component E takes three weeks.Since we need 68 units of Product Z by Period 10, we must start assembling them by Period 8 (taking into account the two-week assembly time for Z). Therefore, we need all units of A and B at the latest by Period 8. The components of A (C and D) thus must be ordered by Period 7, and since D is made of E which takes three weeks, we need to order E by Period 4.
The MRP schedule will show the gross and net requirements for each component by period, as well as the order release and receipt dates to meet the demand for 68 units of Product Z by Period 10. This includes the calculation of quantities required, considering no initial inventory is on hand.
Rafner Manufacturing identified the following budgeted data in its two production departments.
Assembly Finishing
Manufacturing overhead costs $1,200,000 $600,000
Direct labor hours 12,000 DLH 20,000 DLH
Machine hours used 6,000 MH 16,000 MH
What are the company's departmental overhead rates if the assembly department assigns overhead based on direct labor hours and the finishing department assigns overhead based on machine hours?
Answers
Answer:
$137.5
Explanation:
The Rafner Manufacturing assigns its manufacturing overheads cost on machine and labor hours. The assembly department assigns its overheads based on direct labor hours. The overhead rate will be,
$1,200,000 / 12,000 = $100 / labor hour
The finishing department assigns its overheads based on machine hours,
$600,000 / 16,000 Machine hours = 37.5
The Assembly department's overhead rate is $100 per direct labor hour, while the Finishing department's overhead rate is $37.5 per machine hour.
Explanation:
The overhead rate for each department can be calculated by dividing the total overhead costs by the appropriate base (direct labor-hours for the Assembly department and machine hours for the Finishing department).
For the Assembly department, the overhead rate is $1,200,000 / 12,000 direct labor hours = $100 per direct labor hour.
For the Finishing department, the overhead rate is $600,000 / 16,000 machine hours = $37.5 per machine hour.
Learn more about Overhead Rates here:https://brainly.com/question/31953044
#SPJ3
Which of the following statements are true about duration?
a. It is a weighted average of time periods where the weights are the percentage of the bond's value coming from that period.
b. It presents the effective average maturity of the bond's cash flows.
c. It is used to assess a bond's credit risk.
d. The duration of a zero-coupon bond is equal to its time to maturity.
Answers
Answer:
b. It presents the effective average maturity of the bond's cash flows.
d. The duration of a zero-coupon bond is equal to its time to maturity.
Explanation:
Duration is the weighted average of the time periods where Time period are weighted by multiplying by the present value of its cash flow divided by the bond's price.
Louise Fulkerson is president of the Student Marketing Association at Baylor University. Louise and the otherofficers want to conduct a short survey to determine the type of programming they should offer for theupcoming year. Their population is defined as "students in the College of Business." One of the officerssuggests that each of them go into their classes, mostly seniors, and conduct the survey. "We can do it easilyand fast, and our professors will be glad to help the association out by giving us a few minutes to conduct thesurvey," says one of the officers. But Louise is worried about the sample. "Most of us are marketing majorsand we are all seniors taking senior classes. I would prefer to ask the Department Chairperson if we cansurvey students taking Fundamentals of Marketing because all majors have to take this course, and most ofthe future members of the Association will be coming from these Fundamentals classes." Louise is suggestingwhich one of the following sampling methods?
A) quota sample
B) purposive sample
C) stratified sample
D) representative sample
E) systematic sample
Answers
Answer:
B) purposive sample
Explanation:
A purposive sample is a non-probability sample that is selected based on the characteristics of a population and the objective of the study. Purposive sampling is different from convenience sampling and is also known as judgmental, selective, or subjective sampling.
Several subtypes of purposive sampling exist:
Homogeneous Sampling: collecting a very specific set of participants. For example, age 20-24, college-educated, male.
Maximum Variation Sampling: collecting a wide range of participants with different viewpoints to study a certain phenomenon.
The main goal of purposive sampling is to focus on particular characteristics of a population that are of interest, which will best enable you to answer your research questions.
Sun Inc. factors $6,000,000 of its accounts receivables without recourse for a finance charge of 3%. The finance company retains an amount equal to 10% of the accounts receivable for possible adjustments. If it were a transaction with recourse, Sun would have estimated the fair value of the recourse liability at $300,000. What would be recorded as a gain (loss) on the transfer of receivables
Answers
Answer:
Loss $180,000
Explanation:
Accounts Receivable $6,000,000
Factor fees 3%*6,000,000 $180,000
Loss of $180,000 will be recorded for transfer of receivable without recourse to the factor.
In 2021, its first year of operations, Kimble Corp. has a $900,000 net operating loss when the tax rate is 20%. In 2022, Kimble has $250,000 taxable income and the tax rate remains 20%. Assume the management of Kimble Corp. thinks that it is more likely than not that the loss carryforward will not be realized in the near future because it is a new company (this is before results of 2022 operations are known). (a) What are the entries in 2021 to record the tax effects of the loss carryforward
Answers
Answer and Explanation:
Kimble Corp entries in 2021 to record the tax effects of the loss carryforward
a)Dr Deferred Tax Asset ($900,000 × 20%) 180,000
Cr Benefit Due to Loss Carryforward $180,000
Dr Benefit Due to Loss Carryforward $180,000
Cr Allowance to Reduce Deferred Tax Asset to Expected Realizable Value $180,000
(b)
Dr Income Tax Expense ($250,000 × 20%) $50,000
Cr Deferred Tax Asset $50,000
Dr Allowance to Reduce Deferred Tax Asset to Expected Realizable value $50,000
Cr Benefit Due to Loss Carryforward $50,000
1) The three main categories of government outlays are A) net interest payments, government investment, and government consumption expenditures. B) net government subsidies, the government deficit, and government purchases. C) government purchases, transfer payments, and net interest payments. D) government consumption expenditures, government investment, and transfer payments.
Answers
Answer: D) government consumption expenditures, government investment, and transfer payments.
Explanation:
What does the Government do with all the taxes it keeps collecting?
That's a question a lot of people want to know the answer to.
Option D encapsulates this.
Government consumption Spending is a major component of government spending and is done mainly for the direct satisfaction of individual citizens in the Nation. It includes things like Education, Health and Defense.
Another important component is Government Investment. This comprises of all goods and services acquired by the government for the benefit of the nation in future. They include infrastructure spending like roads and bridges as well as research spending.
Finally we have Transfer Payments. This portion of government spending has been on the up and up because it comprises of Social Security benefits and Unemployment insurance. Essentially these are payments that the government receives nothing in return for but underscores the care it has for citizens.
Answer:
D) government consumption expenditures, government investment, and transfer payments.
Explanation:
Government spending or expenditure is made up of consumption, investment, and transfers.
When government obtains goods and services for current use of satisfying its citizens. This is called government expenditure.
When the government is involved in infrastructure investment and research spending, they are looking at the future benefit. This is called investment.
Transfer of funds not meant to obtain goods and services like social security payments is referred to as government transfers.
An industrial manufacturer that works with one or a few large clients and develops products that only these clients will use is most likely to implement a(n) ________ strategy.
Answers
Answer: Custom marketing
Explanation: A custom marketing strategy will most likely be employed by an industrial manufacturer that works with one or a few large clients and develops products that only these clients will use. Marketing creates, communicates, and delivers value, and it involves the management of customer relationships. A custom marketing strategy is one in which a manufacturer customizes and develops products that are unique to the needs of his customers and thus is an essential strategy for delivering a personalized customer experience to each segment of clients, thereby increasing loyalty and customer satisfaction.
For example, the sticky-price theory asserts that the output prices of some goods and services adjust slowly to changes in the price level. Suppose firms announce the prices for their products in advance, based on an expected price level of 100 for the coming year. Many of the firms sell their goods through catalogs and face high costs of reprinting if they change prices. The actual price level turns out to be 90. Faced with high menu costs, the firms that rely on catalog sales choose not to adjust their prices. Sales from catalogs will _______(Remain the same/fall/rise), and firms that rely on catalogs will respond by _______ (Increasing/Reducing) the quantity of output they supply. If enough firms face high costs of adjusting prices, the unexpected decrease in the price level causes the quantity of output supplied to ______ (Fall below/Rise above) the natural rate of output in the short run.
Answers
Answer:
1. Fall
2. Reducing
3. Fall Below
Explanation:
1. FALL. Due to the Menu Costs (costs to suppliers of having to constantly update prices) of inflation being too high for the Catalogue sellers. They leave the prices where they are at 100. Prices have fallen to 90 though so people will therefore buy less from catalogues as they will be considered more expensive.
2. REDUCING. Firms dealing with Catalogues will respond by reducing output. The more output they supply, the more variable costs they deal with. Seeing as their Demand has fallen leading to a reduction in profitability, they will scale back operations to try to spend less and also because less people are buying output.
3. Fall Below. The Quantity of output supplied was dependant on a price level of 100. That was where the natural rate was. Now as prices have fallen and quantity supplied have gone with them, the effect would be a fall Below the Natural Output Level.
If you need any clarification do react or comment.
Suppose a competitive market is comprised of firms that face identical cost curves. The firms experience an increase in demand that results in positive profits for the firms. Which of the following events are then most likely to occur?(i)New firms will enter the market.(ii)In the short run, price will rise; in the long run, price will rise further.(iii)In the long run, all firms will be producing at their efficient scale.
Answers
Answer:
(i)New firms will enter the market.
(iii)In the long run, all firms will be producing at their efficient scale
Explanation:
A perfect competition is characterised by many buyers and sellers of homogenous goods and services. Market price is set by the forces of demand and supply.
If firms are earning positive profits, in the long run new firms would enter into the industry and this woold drive positive profits to zero. As a result , firms would be operating at the efficient scale.
I hope my answer helps you
Answer:
I) New firms will enter the market, III)In the long run, all firms will be producing at their efficient scale.
Explanation:
In Microeconomics, this has already happened before. In most recent years, we have seen this For Flat Screen TVs and Smartphones. This is dynamic because the demand may or may not keep on increasing.
In addition to this, another important variable is the supply. The Cost curve is identical to both of them but this is also dynamical. But all of the firms will work harder and harder to lower the Cost curve, so they'll become more efficient.
Finally, in the long run the product retail price will inevitably fall.
Skinner Company began business on June 30, 2018. At that time, it issued 18,000 shares of $50 par value, 6% cumulative preferred stock and 90,000 shares of $10 par value common stock. Through the end of 2020, there has been no change in the number of preferred and common shares outstanding. a. Assume that Skinner declared and paid cash dividends of $63,000 in 2018, $0 in 2019, and $378,000 in 2020. Compute the total cash dividends and the dividends per share paid to each class of stock in 2018, 2019, and 2020
Answers
Answer:
2018
Preferred Dividend = $54,000
Common Stockholders = $9,000
2019
Preferred Dividend arrears =$54,000
Common Stockholders = $0
2020
Preferred Dividend = $54,000
Common Stockholders = $270,000
Explanation:
Preferred stockholders has an advantage that they are paid first when there is any dividend is announced. The residual dividend will be divided into the common stockholders. Any prior years due dividend and current years dividend associated with preferred share will be paid first.
As per given data
Preferred shares = 18,000 x $50 = $900,000
Preferred Dividend = $900,000 x 6% = $54,000
2018
Dividend Declared = $63,000
Dividend Allocated to Common Stockholders = Dividend Declared - Preferred Dividend = $63,000 - $54,000 = $9,000
2019
Dividend Declared = $0
Preferred Dividend Arrears = $54,000
2020
Dividend Declared = $378,000
Preferred Dividend Arrears = $54,000
Dividend Allocated to Common Stockholders = Dividend Declared - Preferred Dividend - Preferred Dividend Arrears = $378,000 - $54,000 - $54,000 = $270,000
Sales Mix and Break-Even Analysis Michael Company has fixed costs of $2,313,840. The unit selling price, variable cost per unit, and contribution margin per unit for the company's two products follow: Product Selling Price Variable Cost per Unit Contribution Margin per Unit QQ $640 $380 $260 ZZ 460 280 180 The sales mix for Products QQ and ZZ is 85% and 15%, respectively. Determine the break-even point in units of QQ and ZZ. If required, round your answers to the nearest whole number. a. Product QQ units b. Product ZZ units
Answers
Answer:
a.
Break even in units of QQ is 7930 units
b.
Break even in units of ZZ is 1400 units
Explanation:
To calculate the break even in units of each product, we first need to find out the overall break even point in units for the company. The over all break even point in units for a two product company is,
Overall Break even in units = Total Fixed costs / Weighted average contribution margin per unit
Where,
Weighted average contribution margin per unit = Weight of Product A in sales mix * Contribution per unit of Product A + Weight of Product B in sales mix * Contribution per unit of Product B
Weighted average CM per unit = 0.85 * 260 + 0.15 * 180
Weighted average CM per unit = $248 per unit
Over all break even in units = 2313840 / 248 = 9330 units
a.
Break even in units Product QQ = 9330 * 0.85 = 7930.5 rounded off to 7930 units
b.
Break even in units Product ZZ = 9330 * 0.15 = 1399.5 rounded off to 1400 units
(a) A local bookseller is considering expanding store space to increase his capacity for books.
The rent for the additional space would cost $3000 per year. The bookseller predicts that the
added space will pull in an additional profit of $4000 per year. The current interest rate is 12%.
Should the bookseller invest in the extra space?
Answers
The book seller should invest in the extra space.
Explanation:
As per the given data:
rent for the additional space given is $300 per year, the additional profit that will be pulled by adding on the space = $4000 per year, the current rate of interest given is = 12%
In order to calculate about the decision, the present values needs to be calculated first
The present value of the investment = (- $ 3000 plus $ 4000) by 1.121
The present value of the investment = $ 571.43
The present value of the investment is positve, hence the book seller should invest in the extra space.
Which of the following is deductible as interest on Schedule A? a.Interest on a loan for a 90-foot yacht (a qualified residence) with a kitchen, 3 baths and 5 bedrooms. b.Interest on loans to finance tax-exempt bonds. c.Loan fees that are not "points". d.Fees for having a new home inspected prior to purchase. e.None of these choices are deductible as interest.
Answers
Answer:
Correct option is A.
Interest on a loan for a 90-foot yacht (a qualified residence) with a kitchen, 3 baths and 5 bedrooms
Explanation:
Assesses are permitted a conclusion for unmistakable intrigue paid or collected during the expense year. Sum and sort of derivation is reliant intentionally for which cash is obtained. Enthusiasm on credit for lease, business and eminence exercises is deducted for balanced gross pay. Enthusiasm on credit if there should be an occurrence of individual utilise like speculation intrigue, qualified home intrigue, contract intrigue prepayment punishments, intrigue identified with aloof action. Enthusiasm on credit used for buying resources producing charge excluded salary isn't deductible.
Following interest is not deductible as an itemised deduction:
1. Credit investigation fees
2. Service charges
3. Premium on convertible bonds
4. Interest paid to carry single premium life insurance
One of Modular Products (MP) customers would like to obtain a 6-month option to purchase 500,000 tables for $119 each. These tables currently sell for $110 each. Assume u equals 1.0994 and d equals .9096. What price should MP charge for this option if the annual risk-free rate is 3.2 percent
Group of answer choices
a. $338,400
b. $421,900
c. $598,100
d. $479,900
e. $533,600
Answers
Answer:
Option E is correct one.
$533,600
Explanation:
% increase = u − 1
% increase = 1.0994 − 1
% increase = .0994, or 9.94%\large % increase = u − 1
% decrease = d − 1
% decrease = .9096 − 1
% decrease = −.0904, or −9.04%
Price with increase = $110(1.0994)
Price with increase = $120.934
Price with decrease = $110(.9096)
Price with decrease = $100.056
rf = Probability of rise(Increase percent) + (1 − Probability of rise)(Decrease percent)
.032(6/12) = Probability of rise(.0994) + (1 − Probability of rise)(−.0904)
Probability of rise = .5606, or 56.06%
Probability of fall = 1 − .5606
Probability of fall = .4394, or 43.94%
Payoff if price increases = $120.934 − 119
Payoff if price increases = $1.934
Payoff if price decreases = $0
Expected payoff = .5606($1.934) + .4394($0)
Expected payoff = $1.0842
Option value = $1.0842/[1 + .032(6/12)]
Option value = $1.0671
Contract value= Option to purchase*Option value
Contract value = 500,000($1.0671)
Contract value = $533,600
Blanchard Company manufactures a single product that sells for $190 per unit and whose total variable costs are $150 per unit. The company’s annual fixed costs are $635,000. The sales manager predicts that annual sales of the company’s product will soon reach 40,500 units and its price will increase to $205 per unit. According to the production manager, variable costs are expected to increase to $145 per unit, but fixed costs will remain at $635,000. The income tax rate is 20%. What amounts of pretax and after-tax income can the company expect to earn from these predicted changes?
Answers
Answer:
The amounts of pretax and after-tax income can the company expect to earn from these predicted changes are $1,795,000 and $1,436,000 respectively.
Explanation:
The sales less the variable cost gives the contribution margin.
The contribution margin less the fixed cost gives the net operating income. Furthermore, net income is the difference between the total sales and the total costs (fixed and variable).
Both sales and variable cost are dependent on the number of units sold.
with these expected changes,
Pretax Income
= 40,500($205 - $145) - $635,000
= $1,795,000
After tax income
= 80% * $1,795,000
= $1,436,000
Carl puts $10, 000 into a bank account that pays an annual effective interest rate of 4% for ten years. If a withdrawal is made during the first five and one-half years, a penalty of 5% of the withdrawal amount is made. Carl withdraws K at the end of each of years 4, 5, 6, and 7. The balance in the amount at the end of year 10 is 10, 000. Calculate K.
Answers
Answer:
K=$980
Explanation:
10,000*(1.04)^10=1.05K(1.04^6+1.04^5)+K(1.04^4+1.04^3)+10,000
K=14,802-10,000/1.05(1.04^6+1.04^5)+1.04^4+1.04^3
K=4,802.4/4.91=$980
A company has preferred stock that can be sold for $28 per share. The preferred stock pays an annual dividend of 5% based on a par value of $100. Flotation costs associated with the sale of preferred stock equal $1.50 per share. The company's marginal tax rate is 35%. Therefore, the cost of preferred stock is;
Answers
Answer:
18.87%
Explanation:
The computation of the cost of preferred stock is shown below:
As we know that
The cost of preferred stock = Preferred dividend ÷ (issue price per share - flotation costs per share)
where,
Preferred dividend is
= 100 × 5%
= $5
Issued price per share is $28
And, the flotation cost is $1.50
So, the cost of preferred stock is
= $5 ÷ ($28 - $1.50)
= 18.87%
We simply applied the above formula
Common sense might say that a monopolist would produce more output than a competitive industry facing the same marginal costs. After all, if you’re making a profit, you want to sell as much as you can, don’t you? What’s wrong with this line of reasoning? Why do monopolistic industries sell less than competitive industries?
Answers
Explanation:
Even though a monopolist usually controls the market price of the commodity it may not be producing more because a monopolist overall goal is to achieve profit maximization.
However, producing more output would not be in their best interest despite been the market maker because it will decrease the price of the goods in the market due to over supply, leading to lower profit for them.
The reason why monopolistic industries sell less than competitive industries because:
Competitive market attracts more customers based on their competitive pricing and benefitsAccording to the given question, we can see that we need to show why a monopolist would have to produce more output in order to make profit, based on the marginal costs of both markets.
As a result of this, we can see that a monopolistic market which is one who seems to be totally dominant in the market would sell less than competitive industries because the competitive market attracts more customers based on their competitive pricing and benefits.
Read more here:
https://brainly.com/question/2891218
E16 13B (L0 3) (Accounting for Restricted Stock) Holt Company issues 10,000 shares of restricted stock to its new CEO, on January 1, 2020. The stock has a fair value of $260,000 on this date. The service period related to this restricted stock is 5 years. Vesting occurs if the CEO stays with the company for 5 years. The par value of the stock is $1. At December 31, 2021, the fair value of the stock is $180,000.Instructions(a)Prepare the journal entries to record the restricted stock on January 1, 2020 (the date of grant) and December 31, 2021.(b)On February 22, 2022, the CEO leaves the company. Prepare the journal entry (if any) to account for this forfeiture.
Answers
Answer and Explanation:
The journal entries are shown below:
a. Unearned compensation $260,000
To Common stock $10,000 (10,000 shares × $1)
To Paid in capital in excess of par - common stock $250,000
(Being the unearned compensation is recorded)
It increased the common stock and the remaining balance is transferred to the paid in capital so these account are credited while on the other hand the contra equity is decreased so unearned compensation is debited
Compensation expenses $52,000 ($260,000 ÷ 5 years)
To Unearned compensation $52,000
(being the compensation expense is recorded)
Since there is a compensation expense so the expense account is debited as it increased the expenses while on the other hand we credited the unearned compensation
b. Common stock 10,000
Paid in capital in excess of par - common stock $250,000
To Compensation expenses $104,000 ($52,000 × 2 years)
To Unearned compensation $156,000
(Being the forfeiture is recorded)
This entry reflects the reversing of the entry with related to the common stock, paid in capital, and compensation expense
Each of the following factors affects the weighted average cost of capital (WACC) equation. Which of the following factors are outside a firm’s control? Check all that apply. The general level of stock prices The effect of the tax rate on the cost of debt in the weighted average cost of capital equation The firm’s dividend payout ratio The impact of a firm’s cost of capital on managerial decisions Consider the following case: International Imports (I2) has two divisions, L and H. Division L is the company’s low-risk division and would have a weighted average cost of capital of 8% if it was operated as an independent company. Division H is the company’s high-risk division and would have a weighted average cost of capital of 14% if it was operated as an independent company. Because the two divisions are the same size, the company has a composite weighted average cost of capital of 11%. Division L is considering a project with an expected return of 9.5%. Should International Imports (I2) accept or reject the project? Accept the project Reject the project On what grounds do you base your accept–reject decision? Division L’s project should be accepted, because its return is less than the risk-based cost of capital for the division. Division L’s project should be accepted, since its return is greater than the risk-based cost of capital for the division.
Answers
Answer:
The general level of stock prices
The effect of the tax rate on the cost of debt in the weighted average cost of capital equation
The project should be accepted.
Division L’s project should be accepted, since its return is greater than the risk-based cost of capital for the division.
Explanation:
The company can determinate their payout ratio and the cost of capital of their equity the rest of the option are determined by either the market or the government.
It should be accepted as the return is based on the division which WACC is 8% therefore, it will make a good use of the capital as is above the expected capital cost
Factors outside a firm's control affecting WACC include stock prices and tax rate effects on cost of debt. A firm's dividend policy and capital cost impact on decisions are controllable. For International Imports, Division L's project should be accepted because its return exceeds its cost of capital.
The factors affecting the weighted average cost of capital (WACC) that are outside a firm's control include:
The general level of stock pricesThe effect of the tax rate on the cost of debt in the weighted average cost of capital equationFactors such as the firm's dividend payout ratio and the impact of a firm's cost of capital on managerial decisions are within the firm's control.
Considering the case of International Imports (I2) and its two divisions, L and H, with WACCs of 8% and 14% respectively, we address the project for Division L. Since Division L's project has an expected return of 9.5%, which is greater than its risk-based cost of capital of 8%, the project should be accepted. The return exceeds the cost, making it a financially viable project for Division L.
Analysis of an income statement, balance sheet, and additional information from the accounting records of Gadgets, Inc., reveals the following items. Required:
1. Purchase of patent
2. Depreciation expanse
3. Decrease in account receivable
4. Increase in inventory
5. purchase of equipment
Indicate on which section of statement of the cash flow each of the item shoul be reported: operating activities (indirect method), investing activities, financing activities, or a separate noncash activities note.
Answers
Answer and Explanation:
There are three categories of cash flow statement activities which are described below:
1. Operating activities: This involves all transactions that after net income impact the working capital. It will subtract the rise in current assets and a reduction in current liabilities, while adding the decline in current assets and a rise in current liabilities.
This will change those changes in working capital. For addition, the depreciation expenses are applied to the net profit and the loss on the selling of assets is added, while the gain on the sale of assets is deducted
2. Investing activities: it tracks operations that involve purchasing and selling long-term properties. Purchase is cash outflow while selling is cash inflow
3. Financing operations: it tracks transactions that have an effect on long-term debt and equity balance of shareholders. Share issue is a cash inflow while redemption and dividend are cash outflows.
Based on this, the classification are as follows
1. Purchase of patent = Investing activities
2. Depreciation expanse = Operating activities
3. Decrease in account receivable = Operating activities
4. Increase in inventory = Operating activities
5. purchase of equipment = Investing activities
If these transactions are held in cash
Which axiom of service-dominant logic applies to this statement? Customers don't buy a car (product)—they buy the company's ability to add value through a defined set of benefits. Multiple Choice Service is the fundamental basis of exchange. Value is co-created by multiple parties, including the company and the customer. A unique experience is created when the customer interacts with the company’s marketing efforts and product. Value is defined by the customer. A customer-centric approach has been supplanted by a newer service-dominant approach.
Answers
Answer:
The correct answer is letter "B": Value is co-created by multiple parties, including the company and the customer
Explanation:
Value refers to the qualification an individual provides to a good or service based on the need it provides to the individual. It does not necessarily mean that the more valuable a product is the more expensive than good will be. It represents that an individual values more that product because it satisfies for him or her a need that must be covered.
Then, if a carmaker provides additional benefits to its customers and those benefits represent values the consumers are looking for, a purchase is likely to take place. Then, both producers and consumers can add value to a product or service.
GM Corporation ($ in millions) 2017 2016 BALANCE SHEETS ASSETS Cash & marketable securities $40,000 $50,000 Accounts receivable 260,000 200,000 Inventories 500,000 450,000 Total current assets 800,000 700,000 Net fixed assets 400,000 300,000 Total assets $1,200,000 $1,000,000 LIABILITIES & EQUITY Accounts payable $170,000 $130,000 Bank loan 90,000 90,000 Accruals 70,000 50,000 Total current liabilities 330,000 270,000 Long-term debt 400,000 300,000 Other liabilities 0 0 Common stock 350,000 350,000 Retained earnings 120,000 80,000 Total liabilities & equity $,1200,000 $1,000,000 INCOME STATEMENTS 2017 2016 Sales $1,500,000 $1,300,000 Cost of goods sold 900,000 780,000 Gross profit 600,000 520,000 Operating expenses: Selling, general & admin, 150,000 150,000 Marketing 150,000 130,000 Depreciation 53,000 40,000 Interest 57,000 45,000 Earnings before taxes 190,000 155,000 Income taxes 76,000 62,000 Net income $114,000 $93,000 Which of following is False? a. Accounts receivable rose, in part because of higher 2017 sales and in part because of customers’ faster payments. b. Inventory management apparently improved as inventory turnover rose in 2017. c. The dollar amount of net working capital rose in 2017 but the quick ratio fell, indicating that current liability rose faster than current assets. d. The dollar amount of net working capital rose in 2017 but the current ratio fell, indicating that current liability rose faster than current assets.
Answers
Answer
GM Corporation
We will prove the individual points using financial ratios.
1. Accounts receivables increased by $60,000. Why?
In 2017.
Receivables turnover ratio = net credit sales divided by Average Receivables
= 1,500,000 / (260,000)
=5.77 times
And Account receivables days = number of days in period divided by AR turnover ratio
= 360 / 5.77 = 62.4 days
In 2016
AR turnover ratio = 1,300,000/200,000
= 6.5 times
And Account receivable days = 56.2days
[ yes indeed AR has increased as a result of increase in Sale and increase in average credit days]
2. What's driving improvement in inventory management.
Inventory turnover = cost of good sold divided by average inventory
In 2017
900,000/500,000
= 1.8
In 2016
780,000/450,000
=1.73
[Inventory is actually still at the same level. Thus management of inventory is consistent hover the 2 years of operations)
3. Net working Assets
Current Assets - Current liability
In 2017
800,000 - 330,000 = $470,000
In 2016
700,000 - 260,000 = $440,000
Quick ratio.
(Current Assets - inventory) divided by Current liability
In 2017
(800,000 - 500,000)/ 330,000 = 0.91
In 2016
(700,000 - 450,000)/260,000 = 0.96
[This indicates that current assets improvement is driven by not liquid assets ]
The Porch Cushion Company manufactures foam cushions. The number of cushions to be produced in the upcoming three months follows:Number of foam cushions to be produced in July13,000Number of foam cushions to be produced in August19,000Number of foam cushions to be produced in September12,000Each cushion requires 2 pounds of the foam used as stuffing. The company has a policy that the ending inventory of foam each month must be equal to 30% of the following month's expected production needs. How many pounds of foam does The Porch Cushion Company need to purchase in August?
Answers
To calculate the number of pounds of foam The Porch Cushion Company needs to purchase in August, add the number of cushions planned for that month to the ending inventory of foam in August, and multiply by the foam needed for each cushion.
Explanation:To calculate the number of pounds of foam The Porch Cushion Company needs to purchase in August, we need to find the total number of foam cushions expected to be produced in the two following months (August and September) and multiply it by the amount of foam needed for each cushion.
In August, the company plans to produce 19,000 cushions. In September, they plan to produce 12,000 cushions. According to the company's policy, the ending inventory of foam in August should be 30% of the expected production in September, which is 0.3 * 12,000 = 3,600 cushions.
To find the total number of cushions for which foam needs to be purchased in August, we sum the cushions to be produced in August and the ending inventory of foam in August: 19,000 + 3,600 = 22,600 cushions.
Since each cushion requires 2 pounds of foam, the company needs to purchase 22,600 * 2 = 45,200 pounds of foam in August.
Use the following data: Purchase Costs Leasing Costs Down payment: $2,400 Security deposit: $800 Loan payment: $720 for 48 months Lease payment: $720 for 48 months Estimated value at end of loan: $4,300 End-of-lease charges: $645 Opportunity cost interest rate: 2 percent Calculate the costs of buying versus leasing a motor vehicle.
Answers
Answer:
Cost of buying option is $32,852
Cost of leasing option is $35,424
Explanation:
Buy option Lease option
down-payment $2,400 $800
monthly repayment($720*48)($720*48) $34,560 $34,560
residual value at end of loan ($4,300) -
end of lease charges - $645
Opportunity of down-payment($2400 or$800)*2%*4)) $192 $64
Total costs of buying/leasing a motor vehicle $32,852 $35,424
By buying the overall of cost of the motor vehicle is reduced by $2,572 ( $32,852 -$35,424)
Conclusively ,the buying is preferable to leasing option since the business would want to save costs in order to improve bottom-line
Final answer:
Calculating the total costs, buying costs $32,660 considering down, loan payments, and final value, while leasing costs $36,005 with security deposit, payments, and end-of-lease charges. Interest rates and depreciation affect the real-world comparison.
Explanation:
To calculate the costs of buying versus leasing a motor vehicle, we need to consider both the initial and ongoing expenditures, as well as the opportunity cost of using the finances for these purposes. Buying involves a down payment and loan payments over 48 months, with an estimated vehicle value at the end of the loan, while leasing includes a security deposit, lease payments for the same duration, as well as end-of-lease charges. Here, we will not take into account the varying depreciation rates of different vehicle models or the opportunity cost interest rate as provided by the student.
Here is the breakdown of costs when buying:
Down payment: $2,400Total loan payment: $720 x 48 months = $34,560Estimated value at end of loan: - $4,300Total cost of buying: $2,400 (down payment) + $34,560 (loan payments) - $4,300 (value at end of loan) = $32,660
Total cost of leasing: $800 (security deposit) + $34,560 (lease payments) + $645 (end-of-lease charges) = $36,005
In this example, without considering the opportunity cost of capital or varying interest rates, the total cost of buying the car is lower than leasing the car. However, in real-world scenarios, the interest rates on automobile purchases or leases should be taken into account, which often follow the 5-year U.S. Treasury Bill rate, and the vehicle's depreciation should also be factored in for a more accurate assessment.