The substances with greater molar entropy in each case are: NO2(g), CH3OCH3(l), and HBr(g), due to factors such as number of atoms, molecule complexity and being heavier gases.
Explanation:In predicting the substance with greater molar entropy in each pair, we have to consider the number of molecules and atoms, phase of matter and complexity of molecules. Here are the predicted substances:
NO2(g) - This molecule is monatomic when compared to N2O4. Molecules with more atoms have higher positional entropy, hence NO2 has higher molar entropy.CH3OCH3(l) - This is a more complex molecule as compared to CH3CH2OH. More complex molecules have higher entropy as there are more possible configurations of their atoms.HBr(g) - This substance is a gas and contains bromine which is heavier than chlorine in HCl. Heavier gases have larger molar entropy. Learn more about Molar Entropy here:https://brainly.com/question/32107086
#SPJ6
When potassium-40 undergoes decay by electron capture the product is?
What are some of the solutes in low-fat chocolate milk?
Answer:
Explanation:
The lowfat chocolate milk is a milk which can be prepared by using milk of low fat or skimmed milk, in which chocolate syrup and sugar syrup can be added additionally.
The main solutes in low-fat milk will be chocolate syrup that contains cocoa powder, some fat, calcium and vitamin D.
This composition will be tasty and people of age groups can drink this. It is good for providing instant energy to athletes after work out.
What is the [pb2+] in a solution made by adding 100 g of pbcl2(s) (mm = 278.1 g/mol) to a 5.4 m solution of nacl and allowing it to come to equilibrium? ignore any changes to solution volume due to the addition of pbcl2(s). once solution reaches equilibrium, it is noticed that some solid pbcl2 remains undissolved. the ksp for pbcl2 is 1.6 × 10−5?
Why are ionic compounds brittle
Ionic compounds are brittle because due to the strong bond between the positive and negative ions that formed the molecules. These positive and negative bonds produce crystals in rigid, lattice structures.
What are ionic compound ?The term ionic compound is defined as the compounds made up of ions that produce charged particles when an atom or group of atoms gains or loses electrons.
Because of their electrostatic attractions, ionic compounds are brittle. These forces keep anions and cations in specific positions in a crystal lattice. Metals, on the other hand, are malleable because the atoms can roll over and create new positions, thereby maintaining their bonds.
Thus, ionic compounds are brittle.
To learn more about an ionic compound, follow the link;
https://brainly.com/question/9167977
#SPJ1
List the number of each type of atom on the left side of the equation hbr(aq)+2naoh(aq)→2nabr(s)+h2o(l)
The left side of the equation HBr(aq) + 2NaOH(aq) includes a total of three hydrogen (H) atoms, one bromine (Br) atom, two sodium (Na) atoms, and two oxygen (O) atoms.
To list the number of each type of atom on the left side of the chemical equation [tex]HBr(aq) + 2NaOH(aq) \rightarrow 2NaBr(s) + H_2O(l)[/tex], we first need to identify each atom present in the reactants. For HBr, we have one hydrogen (H) atom and one bromine (Br) atom. Then, for 2NaOH, since it has a coefficient of two, we count two sodium (Na) atoms, two oxygen (O) atoms, and two hydrogen (H) atoms. Therefore, the total count of each type of atom on the left side is:
Hydrogen (H) atoms: 1 (from HBr) + 2 (from NaOH) = 3Bromine (Br) atoms: 1 (from HBr)Sodium (Na) atoms: 2 (from NaOH)Oxygen (O) atoms: 2 (from NaOH)Iodine-131 decays with a half-life of 8.02
d. in a sample initially containing 5.00 mg of 131i, what mass remains after 6.01 d
The question is about the decay of radioactive isotope Iodine-131 over time, using the concept of half-life. It's calculated that after 6.01 days, approximately 3.18mg of the initial 5.00mg of Iodine-131 remains.
Explanation:The question is about the decay of the Iodine-131 isotope, a nuclear physics concept, using the half-life theory. The half-life is the time it takes for half of a radioactive substance to decay. In this case, the half-life of Iodine-131 is 8.02 days. After 6.01 days, the question asks how much of an initial 5.00 mg sample remains.
First, we need to determine how many half-lives have passed during the 6.01 days. We can calculate this by dividing the overall time elapsed by the half-life of the isotope (6.01 / 8.02). This gives us approximately 0.75 half-lives.
Now, for each half-life, the substance will halve in quantity. So, we can calculate the remaining mass by multiplying the initial mass by (0.5) raised to the power of the number of half-lives (0.75). So, (5.00 mg) * (0.5)^0.75 = 3.18 mg.
So, after 6.01 days, approximately 3.18 mg of the original Iodine-131 remains.
Learn more about Radioactive Decay here:https://brainly.com/question/1770619
#SPJ12
To calculate the remaining mass of iodine-131 after 6.01 days with a half-life of 8.02 days, use the decay formula. For an initial 5.00 mg sample, approximately 2.58 mg of iodine-131 would remain after 6.01 days.
Iodine-131 decays with a half-life of 8.02 days. To calculate the mass remaining after 6.01 days, we use the formula: Final mass = Initial mass x (1/2)^(time elapsed/half-life).
Given an initial mass of 5.00 mg of 131I and a decay time of 6.01 days, the mass remaining can be calculated as follows:
Final mass = 5.00 mg x (1/2)^(6.01/8.02)Final mass = 5.00 mg x (1/2)^(0.7494)Final mass = 5.00 mg x 0.5158 = 2.58 mgAnthracene is a yellow, crystalline solid found in coal tar. complete this structure for anthracene, c14h10, by adding bonds and hydrogen atoms as necessary.what type of hybrid orbitals are utilized by carbon in anthracene?how many σ bonds and π bonds are there in an anthracene molecule? how many valence electrons occupy σ-bond orbitals and how many occupy π -bond orbitals?
Anthracene is a polycyclic aromatic hydrocarbon with chemical formula C₁₄H₁₀. The number of fused rings in Anthracene are three in number. This compound is colorful and is used in the formation of different dyes due to its property of deloclization of pi electrons. All the carbon atoms in Anthracene are sp² hybridized with a trigonal planar structure hence, the Anthracene is planar in nature.
Number of Sigma Bonds:
There are 26 sigma bonds (colored in Blue) in Anthracene among which 10 sigma bonds are between carbon and hydrogen atoms while the remaining are between the carbon atoms.
Number of Pi-Bonds:
There are 7 pi bonds in Anthracene (colored in red). All pi bonds are present between carbon and carbon atoms.
Number of Electrons in Sigma Bonds:
As one sigma bond is formed by 2 electrons hence, 26 sigma bonds will be formed by 52 electrons.
Number of Electrons in Pi Bonds:
As one pi bond is formed by the side wise overlap of two p orbitals hence one pi bond is formed by two electrons so, 7 pi bonds will be formed by 14 electrons.
The hybrid orbital that is utilized by the carbon in anthracene is [tex]\boxed{{\text{s}}{{\text{p}}^2}}[/tex] .
The anthracene molecule contains [tex]\boxed{{\mathbf{26}}{\text{ }}{\mathbf{sigma}}}[/tex] bonds and [tex]\boxed{{\mathbf{7}}{\text{ }}{\mathbf{\pi }}}[/tex] bonds.
The number of valence electrons in sigma orbital is [tex]\boxed{{\mathbf{52}}}[/tex] and pi-orbitals is [tex]\boxed{{\mathbf{14}}}[/tex] .
Further explanation:
The anthracene is a crystalline compound and it is yellow in color. It contains three fused rings of benzene thus it is a polyaromatic compound.it has a molecular formula [tex]{{\text{C}}_{{\text{14}}}}{{\text{H}}_{{\text{10}}}}[/tex].
Prediction of hybridization:
The hybridization can be determined by calculating the number of hybrid orbitals (X) which is to be formed by the atom. The formula to calculate the number of hybrid orbitals (X) as follows:
[tex]\boxed{{\text{X}}={\text{Number of bond pair}}+{\text{Number of lone pair}}}[/tex]
Here X is a steric number.
When X is 2 then hybridization is sp.
When X is 3 then hybridization is [tex]{\text{s}}{{\text{p}}^2}[/tex].
When X is 4 then hybridization is [tex]{\text{s}}{{\text{p}}^3}[/tex] .
The structure of anthracene is attached in the image.
Since all carbon atom in anthracene contains three bond pairs and no lone pair thus, the hybridization can be calculated as follows:
[tex]\begin{aligned}{\text{X}}&={\text{Number of bond pair}}+{\text{Number of lone pair}}\\&=3+0\\&=3\\\end{aligned}[/tex]
The value of X is 3, therefore, the hybridization of each carbon in anthracene is [tex]{\text{s}}{{\text{p}}^2}[/tex]
The structure of anthracene contains 26 sigma bond and 7 pi bonds. (refer to the image attached).
The number of valance electron in sigma orbital is twice of the number of sigma bond present in the molecule because every sigma bond contains 2 electrons.
[tex]{\text{Valence electron in sigma orbital}} = 2\left({{\text{sigma bond}}}\right)[/tex]
In anthracene, number of sigma bond is 26, therefore,
[tex]\begin{aligned}{\text{Valence electron in sigma orbital}}&=2\left({{\text{sigma bond}}}\right)\\&=2\left({{\text{26}}}\right)\\&=52\\\end{aligned}[/tex]
The number of valance electron present in pi-orbital is twice of the number of pi bond present in the molecule because every pi-bond contains 2 electrons.
[tex]\begin{aligned}\text{Valence electron in }\pi\text{-orbital}&=2(\pi\text{-bond})\end{aligned}[/tex]
In anthracene, number of pi bond is 7, therefore,
[tex]\begin{aligned}\text{Valence electron in }\pi\text{-orbital}&=2(\pi\text{-bond})\\&=2(7)\\&=14\end{aligned}[/tex]
Learn more:
1. Molecules and polyatomic ions cannot be adequately described using a single lewis structure.: https://brainly.com/question/6786947
2. Determine the lewis structure of butanal.: https://brainly.com/question/6215269
Answer details:
Grade: Senior school
Subject: Chemistry
Chapter: Covalent bonding
Keywords: Anthracene, yellow crystalline, coal tar, structure of anthracene, C14H10, hybrid orbitals.
Malonic ester (diethyl malonate) is treated successively with sodium ethoxide (1 eq.), ethyl bromide, potassium tert-butoxide, isobutyl chloride, hot aqueous naoh, hcl, and heat. what is the final product?
Final answer:
Malonic ester synthesis converts alkyl halides to carboxylic acids with two additional carbons.
Explanation:
Malonic ester synthesis involves a series of reactions converting an alkyl halide into a carboxylic acid with two additional carbons. The final product after treating malonic ester successively with sodium ethoxide, ethyl bromide, potassium tert-butoxide, isobutyl chloride, hot aqueous sodium hydroxide, hydrochloric acid, and heat would be a carboxylic acid with a methyl group attached.
The alkali metals react with the halogens to form ionic metal halides. what mass of potassium chloride forms when 5.11 l of chlorine gas at 0.943 atm and 286 k reacts with 29.0 g potassium?
The mass of potassium chloride formed is 31.5 g
The number of moles of chlorine gas is obtained from the ideal gas equation;
P = 0.943 atm
V = 5.11 l
T = 286 K
n = ?
R = 0.082 atm L K-1mol-1
From;
PV = nRT
n = PV/RT
n = 0.943 atm * 5.11 l/0.082 atm L K-1mol-1 * 286 K
n =4.819 /23.452
n = 0.21 moles of Cl2
Number of moles of K = mass/molar mass = 29.0 g/39 g/mol = 0.74 moles
Equation of the reaction is;
2K + Cl2 ----> 2KCl
Since the reaction is 2:1
1 mole of Cl2 reacts with 2 moles of K
0.21 moles of Cl2 reacts with 0.21 * 2/1 = 0.42 moles of K
This means that K is the reactant in excess.
1 mole of Cl2 yields 2 moles of KCl
0.21 moles of Cl2 yields 0.21 * 2/1 = 0.42 moles of KCl
Molar mass of KCl = 75 g/mol
Mass of KCl = 0.42 moles of KCl * 75 g/mol
Mass of KCl = 31.5 g of KCl
Learn more: https://brainly.com/question/9743981
a weather balloon contains 8.80 moles of helium at a ppressure of 0.992 atm and a temperature os 25 C at ground level. What is the volume of the balloon under these conditions?
By using the Ideal Gas Law and the given conditions, we can calculate the volume of the weather balloon to be approximately 221.4 liters.
Explanation:The volume of a gas can be determined by using the Ideal Gas Law: PV = nRT. Here, P is the Pressure, V is the Volume, n is the number of moles, R is the universal gas constant and T is the absolute Temperature. The constants provided in the question are the moles of Helium (8.80 moles), the Pressure (0.992 atm) and the Temperature (25 C).
Firstly, we need to convert the temperature from Celsius to Kelvin. The conversion formula is: T(K) = T(C) + 273.15. Thus, T(K) = 25 + 273.15 = 298.15 K.
Now, we use these values in the Ideal Gas Law to find the volume. We rearrange the formula to solve for volume: V = nRT / P. Substituting the given values and the gas constant R as 0.0821 atm L/mol K, we get:
V = (8.80 moles * 0.0821 L atm / (mol K) * 298.15 K) / 0.992 atm = 221.4 L
Therefore, the volume of the weather balloon under the given conditions is approximately 221.4 Liters.
Learn more about Ideal Gas Law here:https://brainly.com/question/30458409
#SPJ11
Question 19 Unsaved
Which of the following is NOT one of the warning signs used to predict a volcanic eruption?
1)
changing chemistry of volcanic gas
2)
development and widening of surface cracks on the volcano
3)
earthquake activity
4)
the activity of animals
The volcanic eruption warning sign has not been the widening of the surface and cracks in the volcano. Thus, option 2 is correct.
Volcanic eruptions can be defined as the coming out of the lava and the magma from the earth's crust. The volcanic eruptions have consisted of magma along with several gases.
The change in the chemistry of the volcanic gas has been the warning sign of the eruption as there has been a change in the pressure and temperature of the gases that results in the explosion.
The volcanic eruption has been mediated by the shift in the earth's crust leading to earthquake activity.
The volcanic eruption has also been mediated with the warning sign as the activity of the animals, as some animals have been capable of listening to the waves that have been the indication of the volcanic eruption.
In the volcanic eruption, there has been no widening of the earth's surfaces or cracks in the volcano. However, this has been an alarming sign of the movement of the tectonic plate. Thus, option 2 is correct.
For more information about the volcanic eruption, refer to the link:
https://brainly.com/question/1622004
The activity of animals is not a scientific indicator for predicting volcanic eruptions, unlike seismic activity, gas emissions, and geological changes.
Explanation:The question asks which of the following is NOT a warning sign used to predict a volcanic eruption. Changing chemistry of volcanic gas, development and widening of surface cracks on the volcano, and earthquake activity are all regarded as warning signs of a potential volcanic eruption. However, the activity of animals is not considered a reliable scientific indicator for predicting volcanic eruptions. Animal behavior can be influenced by many factors, and while there are anecdotal reports of animals acting unusually before an eruption, it is not used as a primary method of prediction by volcanologists. Instead, they rely on more measurable signs like seismic activity, gas emissions, and geological changes.
Consider a certain type of nucleus that has a half-life of 32 min. calculate the percent of original sample of nuclides remaining after 1.9 hours have passed
To calculate the percent of nuclides remaining after 1.9 hours, given a half-life of 32 minutes, we find that about 3.56 half-lives have passed and approximately 9.09% of the original sample remains.
Explanation:The question concerns the calculation of the remaining nuclides in a sample after a period of time, given the half-life of the substance. If the half-life of a certain type of nucleus is 32 minutes, we first need to calculate how many half-lives are in 1.9 hours. Since there are 60 minutes in an hour, 1.9 hours equals 114 minutes. Dividing 114 minutes by the half-life of 32 minutes gives us approximately 3.56 half-lives.
After each half-life, the amount of a radioactive material will halve. To find the remaining percent, we use the formula:
Percent Remaining = (1/2)number of half-lives passedTherefore, for 3.56 half-lives passed, the calculation is as follows:
Percent Remaining = (1/2)3.56Punching this into a calculator, we find that about 9.09% of the original sample remains after 1.9 hours have passed.
Write and balance a net ionic equation for the reaction between iron(ii) chloride and potassium hydroxide to form iron(ii) hydroxide and potassium chloride.
Answer: The net ionic equation is written below.
Explanation:
Net ionic equation of any reaction does not include any spectator ions.
Spectator ions are defined as the ions which does not get involved in a chemical equation. They are found on both the sides of the chemical reaction when it is present in ionic form.
The chemical equation for the reaction of iron (II) chloride and potassium hydroxide is given as:
[tex]FeCl_2(aq.)+2KOH(aq.)\rightarrow Fe(OH)_2(s)+2KCl(aq.)[/tex]
Ionic form of the above equation follows:
[tex]Fe^{2+}(aq.)+2Cl^-(aq.)+2K^+(aq.)+2OH^-(aq.)\rightarrow Fe(OH)_2(s)+2K^+(aq.)+2OH^-(aq.)[/tex]
As, potassium and hydroxide ions are present on both the sides of the reaction. Thus, it will not be present in the net ionic equation and are spectator ions.
The net ionic equation for the above reaction follows:
[tex]Fe^{2+}(aq.)+2OH^-(aq.)\rightarrow Fe(OH)_2(s)[/tex]
Hence, the net ionic equation is written above.
Iron(II) chloride reacts with potassium hydroxide to form iron(II) hydroxide and potassium chloride. The net ionic equation, which only includes the particles that participate in the reaction, is: Fe2+(aq) + 2 OH-(aq) → Fe(OH)2(s). Potassium and chloride ions are spectator ions and aren't included.
Explanation:The reaction between iron(II) chloride (FeCl2) and potassium hydroxide (KOH) produces iron(II) hydroxide (Fe(OH)2) and potassium chloride (KCl). The balanced chemical equation for this reaction is:
FeCl2(aq) + 2 KOH(aq) → Fe(OH)2(s) + 2 KCl(aq).
The net ionic equation only includes the ions and molecules directly involved in the reaction, which are Fe2+, Cl-, K+, and OH-. Therefore, the net ionic equation will look like this:
Fe2+(aq) + 2 OH-(aq) → Fe(OH)2(s).
The potassium ions (K+) and chloride ions (Cl-) do not participate directly in the reaction so they are not included. They are known as the spectator ions.
Learn more about Net Ionic Equation here:https://brainly.com/question/36522237
#SPJ3
Does the structure below exhibit geometric isomerism? ch3 tally1 ch3― c ―ch═ch―ch3 tally1 ch3
If the ph of hc3h5o2 is 4.2 and the ka 1.34x10^-5, what is the equilibrium concentration
Why is the bond between two single hydrogen atoms stable?
A. It is not stable, each hydrogen only has 1 electron and they need 8 electrons to be stable.
B. Hydrogen only uses the first energy shell, which holds 2 electrons, not 8.
C. Each hydrogen donates more electrons in their lower energy shells to get to 8 but only to other hydrogen atoms.
D. Each hydrogen has 4 electrons to share for a total of 8 when 2 hydrogens bond.
Answer:
B. Hydrogen only uses the first energy shell, which holds 2 electrons, not 8.
Explanation:
As hydrogen is the first element in the periodic table and has the atomic number it can mix with a variety of elements, including itself, when two atoms of Hydorgen bond the bond they create fills up the first level of energy which only uses 2 electrons in order to be completed, which makes the bond stable by filling up the energy level.
When atoms of two or more different elements bond, their properties ___________.
A. are the same as the largest atom in the compound
B. change
C. combine
D. None of these
When atoms of two or more different elements bond, their properties change.
What is the difference between molecules and compounds?When two or more atoms of the same element chemically combine, a molecule is created.
Examples: O₂, O₃, H₂
A compound is a type of molecule in which the atom types that make up the molecule differ from one another.
Examples: NaCl, H₂O
Properties of compound:Only chemical breakdown can separate compounds.Different atoms of elements are present in a defined ratio.Learn more about molecules and compounds here:
https://brainly.com/question/21983682
#SPJ2
Which statement is true regarding methane and ammonia?
A compound contains 64.27% carbon, 7.19% hydrogen, and 28.54% oxygen. the molar mass is 168.19 g/mol. what is the molecular formula
The molecular formula for a compound with 64.27% carbon, 7.19% hydrogen, and 28.54% oxygen with a molar mass of 168.19 g/mol is C9H12O3.
Explanation:First, we assume 100g of the compound is present so the percentages can be taken as the mass in grams of each element. This gives us 64.27g of carbon, 7.19g of hydrogen, and 28.54g of oxygen. Then, we convert grams to moles using each element's molar mass (C=12.01g, H=1.01g, and O=16.00g).
So, for Carbon we get:
64.27g/12.01g = 5.349 moles
For Hydrogen we get:
7.19g/1.01g = 7.119 moles
For Oxygen we get:
28.54g/16.00g = 1.784 moles.
Now, we divide each mole number by the smallest number of moles calculated in the previous step (1.784) to determine the mole ratio, rounding to the nearest whole number. This will give us C3H4O1. Thus, our empirical formula (the formula in its lowest terms) is C3H4O1.
The next step is to determine the molecular formula, which tells us the actual number of atoms of each element in a molecule of the compound. To find the molecular formula, we compare the empirical formula mass to the molar mass of the compound to find a multiple which we then use to multiply the subscripts in our empirical formula. Therefore, with a molar mass of 168.19 g/mol and an empirical formula weight of 56.06 g/mol (C3H4O1), we find our multiple to be 3 (around 168/56).
The resulting molecular formula would be C9H12O3, meaning our compound consists of 9 carbon atoms, 12 hydrogen atoms, and 3 oxygen atoms.
Learn more about Molecular formula here:https://brainly.com/question/28647690
#SPJ3
Which of the following gases will have the highest velocity at a given temperature? (3 points)
A .Ne
B. O2
C .He
D. Cl2
Answer:
Option-(C)-Helium, He is the most lightest among the given four elements. As the molecular mass of helium,He is about 4.002602 u. It is considered the second most lightest element inside the periodic table after the hydrogen,H atom which is the lightest of all.
Explanation:
Velocity dependence upon the molecular weight of the element:The molecular weight of the different elements gives them the very specific features including the ability to travel fast in a given space. While the helium,He is considered one of the lightest elements in the universe so, it has a greater velocity among the four options.
For example:A person with less weight will run much faster as compared to a person having more weight.
Why is potassium nitrate classified as aj electrolyte?
Potassium nitrate is classified as an electrolyte because it dissociates into electrically charged ions, potassium (K+) and nitrate (NO3-), which allow it to conduct electricity when dissolved in water.
Explanation:Potassium nitrate is classified as an electrolyte because it dissociates into ions when dissolved in water. Potassium (K), with an atomic number of 19, easily donates its one valence electron, resulting in a positively charged potassium ion, K+. This ion is a cation. Similarly, the polyatomic nitrate ion, NO3-, which is held together by polar covalent bonds, combines with the potassium cation to form the ionic compound potassium nitrate, KNO3. The dissociation of potassium nitrate in water into K+ and NO3- ions enables it to conduct electricity, a characteristic behavior of electrolytes.
Choose all the answers that apply. The sun: heats the earth evenly;can acclerate the water cycle;is closer to the earth during the summer;is the perfect distance from earth;causes surface waves
Answer:
Heats the earth evenly;can acclerate the water cycle;is the perfect distance from earth.Explanation:
Radiation is the most important process of heat propagation, because it is through it that the heat of the sun reaches the earth. Without this process there would be no life on earth. While conduction and convection occur only in material media, radiation also occurs in a vacuum, so it is possible for the sun to heat the earth evenly.
The heat radiated by the sun heats the water of rivers, lakes, seas and oceans occurring the phenomenon of evaporation during the water cycle. At this point, the liquid state of water changes to its gaseous state as it moves from the earth's surface to the atmosphere. For this reason we can say that the sun can accelerate the water cycle.
Although the Earth's orbit around the Sun is an ellipse, not a circle, the distance from Earth to the Sun varies by only 3%, with the Earth being closest to the Sun from January 4-7 each year, depending on leap year. But it's easy to remember that the northern hemisphere of the earth is also closer to the sun in January and it's winter there, while it's summer in the southern hemisphere. So we cannot say that the earth is closer to the sun in summer, but between January 4th and 7th.
Living conditions on earth are a puzzle to astronomy. A little closer to the sun - and we'd be a greenhouse and toxic high-pressure gas plant like Venus. A little farther - and the gases would escape, the water would freeze, there would be at most microbes, as on Mars. The earth is the perfect distance to house water, oxygen, carbon and complex life forms.
Surface Waves are seismic waves that propagate to the Earth's surface and result from interference between P waves and S waves (called volumetric waves). It is to the surface waves that are due to the great destruction caused by the earthquakes. The sun does not interfere with the creation of these waves, which is a factor caused by the movement of the earth and other geological terms.
Explain how a change in thermal energy causes matter to change From one state to another.Give two examples
The concentration of kbr in a solution prepared by dissolving 2.10 g of kbr in 897 g of water is __________ molal.
Final answer:
To find the molality of a KBr solution, divide the mass of KBr (2.10 g) by its molar mass (119.0 g/mole) to get moles, and then divide by the mass of the solvent in kilograms (0.897 kg of water).
Explanation:
The concentration of KBr in a solution prepared by dissolving 2.10 g of KBr in 897 g of water is calculated using the molality formula. Molality is defined as the number of moles of solute per kilogram of solvent. First, we need to find the number of moles of KBr by dividing the mass (2.10 g) by its molar mass (119.0 g/mole), which gives us the number of moles. Then, we divide the number of moles by the mass of the solvent (water) in kilograms to obtain the molality of the solution.
The calculation is as follows:
Number of moles of KBr = 2.10 g / 119.0 g/moleMolality (m) = Number of moles of KBr / 0.897 kg (mass of water)By performing these calculations, we can determine the molality of the KBr solution.
How does the atmospheric pressure at altitudes below sea level compare
QUICK TIMES RUNNING OUT!
What method could you use to seperate oil from water? Remember that the both must still remain, they just have to be seperated.
What is the rate of a reaction if the value of k is 0.01, [A] is 2 M, and [B] is 3 M? Rate = k[A]3[B]2
A) how many hydrogen atoms are in an acyclic alkane with 15 carbon atoms?
Write a balanced equation for the combustion of propane. (be sure to include states of matter in your equation.)
Compound j is optically active and has the molecular formula c6h10 and has a four carbon ring. on catalytic hydrogenation, j is converted to k (c6h12) and k is optically inactive. propose structures for j and k. (draw a three-dimensional formula for each using dashes and wedges around chiral centers.) j (draw one of the enantiomers):
Compound J, with the formula C6H10, could be a cyclobutane with two methyl groups creating a chiral center, which becomes a non-chiral cyclohexane (C6H12) upon hydrogenation.
Explanation:The student's question is related to the identification of the structures of an optically active compound with the molecular formula C6H10, and its hydrogenated form C6H12.
Compound J must be a cycloalkane with a four-carbon ring to fit the given molecular formula and to be optically active, it should contain at least one chiral center. Given that hydrogenation leads to an optically inactive compound (K), it suggests that compound J had one or more chiral centers which become quenched upon hydrogenation.
One possible structure for J could be a cyclobutane ring with two methyl groups bonded to adjacent carbon atoms, creating a chiral center at one of those carbons. Upon hydrogenation, the double bonds are saturated, resulting in a compound with all single bonds, thus removing any chirality and creating an optically inactive compound (K).
The proposed structure for J could be represented as follows (for one of the enantiomers):
Cyclobutane ring with a chiral center (drawn using dashes and wedges).Two methyl groups (-CH3) attached to adjacent carbons.And for compound K, after hydrogenation:
Cyclohexane (since the addition of H2 would give us C6H12, which is the formula for cyclohexane).No chiral centers as all carbons are in the plane of symmetry.