Answer:
away from; away from
Explanation:
A divergent boundary occurs when two tectonic plates move away from each other. Here two plates are moving away from each other along this boundary. The result of this motion is that North America is moving away from Europe.
What is mid-Atlantic Ridge?The Mid-Atlantic Ridge is defined as the mid-ocean ridge which is located at the bottom of the Atlantic ocean which stretches approximately 16,000 kilometers from north to south. Mid ocean ridges are large central rift valleys which is surrounded by the mountain ranges created by tectonic forces along divergent plate boundary lines.
The divergent plate boundaries exist between the plates which are spreading apart from each other. This occurs due to the convection currents in the mantle rising and impacting beneath the lithosphere before spreading out and dragging plates along with them.
The mid Atlantic range ridge separates the Eurasian, north American and african plates.
To know more about mid Atlantic range ridge , visit;
https://brainly.com/question/20278014
#SPJ2
The lengthening of a transmitted signal's wavelength and/or a decrease in its frequency, which indicates that the object is moving away from the observer, is called the
A) spectrum.
B) red shift.
C) blue shift.
D) distortion.
B
Relative to the observer, the objected, emitting visible light will appear red in color because the wavelength of light is stretched hence acquiring longer wavelength in the visible electromagnetic spectrum (remember red light has the longest wavelength in the visible light spectrum).
Explanation:
Conversely, if the object was moving towards the observer, it would appear blue in color (blue shift) because the relative wavelength of the visible light would be ‘compressed’ (remember this is always relative to the observer) hence the wavelength would be shorter (and blue light has the shortest wavelength in the visible light spectrum).
Both these phenomenons are classified under Doppler shift effect of waves. It also occurs in our daily lives. When a wailing ambulance approaches you, the pitch of the wailing sounds is higher (relative to you). However, when the ambulance passes you and begins stretching away from you, the pitch of the wailing goes low.
Learn More:
For more on Doppler shift effect check out;
https://brainly.com/question/3841958
#LearnWithBrainly
. It is called the blue shift, because the more compacted waves are shifted toward the blue end of the spectrum.
ITS B
Eye color is one example of a trait caused by a
Answer:
Eye colour is one example of a trait caused by the concentration of melanin in genes.
Explanation:
Eye colour is decided based on two distinct factors- pigmentation of the eye’s iris and scattering of the light by the 'stroma of the iris'. It is a 'polygenic phenotypic' character in a human being.
The pigmentation of the iris varies between brown and black, that all depends on melanin concentration in the iris stroma, iris pigment epithelium and the cellular density of trauma. Further, the eye colour genetics are complicated and multiple genes are responsible for same.
Final answer:
Eye color is an inherited trait determined by multiple genes and alleles, where certain alleles are dominant over others. A green-eyed child with brown-eyed parents suggests both parents are heterozygous for the green eye color allele. The pattern of inheritance is also influenced by epistasis and linkage.
Explanation:
Eye color is an example of a trait that is determined by multiple genes. In humans, eye color can be influenced by multiple alleles, where certain alleles are dominant over others. For example, the allele for brown eyes is dominant over the allele for blue eyes, meaning that a person with one copy of each allele will have a brown iris.
Moreover, the inheritance pattern of eye color is more complex due to the presence of epistasis, where the expression of one gene is influenced by one or more other genes. In the instance provided, a child with green eyes born to parents with brown eyes indicates that both parents carry the allele for green eyes, making them heterozygous. Therefore, choice b. Both parents are heterozygous, having the green trait on the green-blue eye gene, explains how this is genetically possible.
The phenomenon of marble cancer is due to
(a) soot particles (c) fog
(b) CFCs (d) acid rain
Answer:
The phenomenon of marble cancer is due to ACID RAIN.
Explanation:
The marble corrosion is a process by which the marbles or limestone used in construction of monuments and buildings is corroded away by the acid rain. The sulphur-dioxide and nitrogen oxides present in the atmosphere undergoes certain chemical reaction causing this acid rain. These chemical in the acid rain converts the calcium present in the limestone or marble into salt.
Also, this marble cancer leads to change the appearance and color. Sometime due to over corrosion the monuments or building causes them disintegrate .Tajmahal is one of the monument affected by marble cancer. the white color of tai mahal is slowly turning into yellow due to this marble cancer.
CI is the element symbol of Chlorine with an atomic unit of 18.
a. True
b. False
Answer:
b) False
Explanation:
CI is the element symbol of Chlorine with an atomic mass unit of 35.5 amu and atomic number 17.
That's why the given statement is false.
The elements of group 17 are called halogens. These are six elements Fluorine, Chlorine, Bromine, Iodine, Astatine.
Chlorine is present below the bromine and have following properties:
Properties of Chlorine:
1. it is greenish-yellow irritating gas.
2. its melting point is 172.2 K
3. its boiling point is 238.6 K
4. it is disinfectant and can kill the bacteria.
5. it is also used in manufacturing of paper, paints and textile industries
Rank the following elements by increasing electronegativity sulfur, oxygen, neon, aluminum
Answer:
Increasing order of Electronegativity:
Neon < Aluminum < Sulfur <Oxygen
0 < 1.61 < 2.58 < 3.44
Explanation:
Electronegativity:
Electronegativity is the power of an atom to attract shared pair of electron in a bond.
Trend in Periodic Table:
Electronegativity increases from left to right along the periodIt decreases from top to bottom in a group of the periodic table.But there are some irregularities in the periodic table as group have differently behave, the are the most stable elements in the periodic table.Group VIIIA have complete there duplet and octaet of electron in shells.Flourin is the most electronegative element in periodic tableCs is the less electronegative and most electropositive in the periodic tableAtomic radii also effect the electronegativity, the greater the size atom smaller the electronegativity and vise versa.Electronegativity of the following Compounds is
1. Electronegativity of sulfur:
Sulfur is in group 4 and its
EN of Sulfur = 2.58
2. Electronegative of oxygen:
Oxygen is in group VIA and much electronegative than Sulfur.
The EN oxygen = 3.44
3. Electronegative of Neon:
Neon is group VIIIA member and most stable element thats why have it have no data for electronegativity.
The EN of Neon = 0
4. Electronegative of Al:
It is group IIIA member and have less electronegativity
The EN of Aluminum= 1.61
So the Increasing order of electronegativity is
Neon < Aluminum < Sulfur <Oxygen
The order of increasing electronegativity for aluminum, sulfur, oxygen, and neon is: aluminum < sulfur < oxygen < neon. This order is determined by the increasing concentration of positive charge in the nucleus and the arrangement of electron configurations.
Explanation:The elements in question, sulfur, oxygen, neon, and aluminum, can be ranked in order of increasing electronegativity by looking at their positions on the periodic table. Electronegativity increases from left to right across a period, and from bottom to top in a group. Thus, the order of increasing electronegativity would be as follows: aluminum < sulfur < oxygen < neon. This is due to the electron configurations of these elements as well as the increasing concentration of positive charge in the nucleus as one moves from left to right in a period and downward across a group.
Learn more about Electronegativity here:https://brainly.com/question/10531792
#SPJ3
please please please help 12 points !!!
Fission is the process where nuclei:
Split to form smaller nuclei.
Fusion is the process where nuclei:
Combine to form larger nuclei.
A easy way to remember which is which is by remembering that to fuse two things together is to combine them to make a single entity, and fusion is the process of fusing nuclei together. And if you know that, then you will know that fission is the process of splitting nuclei.
Fusion: Combine
Fission: Split
I hope this helps. Let me know if you have any questions or if anything confuses you. :)
What is the velocity of a wave traveling north with a frequency of 75 hertz and a wavelength of
6 meters?
Answer:
v = 450 m/s
Explanation:
Given data:
Frequency = 75 Hz
Wavelength = 6 m
Velocity = ?
Solution:
Velocity is the product of frequency and wavelength.
v = f × λ
v = 75 Hz × 6 m
Hz = s⁻¹
v = 75 s⁻¹ × 6 m
v = 450 m/s
Answer: 450
meters per second
Explanation:
3. Write the nuclear symbol and hyphen notation
for each of the following isotopes:
a. mass number of 28 and atomic number of 14
b. 26 protons and 30 neutrons
Answer:
A. Si-28
B.Fe-56
Explanation:
Answer:
a. ²⁸₁₄Si, Silicon-28
b. ⁵⁶₂₆Fe, Iron-56
Explanation:
a. For the nuclear symbol, the mass number of the isotope is on top while the atomic number is at the bottom. For example, ²⁸₁₄Si. The hypen notation for the isotope is Silicon-28 based on the atomic number and mass number.
b. The mass number of the isotope is equal to the sum of protons and neutrons = 26+30 = 56. The atomic number is the number of protons = 26. Thus, the nuclear symbol is ⁵⁶₂₆Fe and the hypen notation is Iron-56.
A polar covalent bond is likely to form between two atoms that
a. are similar in electronegativity
b. are of similar size
c. differ in electronegativity
Answer:
are similar in electronegativity
Explanation:
Polar covalent bond is formed by mutual sharing of electrons between two identical atoms or having small difference of electronegativity.
A polar covalent bond is likely to form between two atoms that differ in electronegativity. The shared pair of electrons are attracted towards the more electronegative atom ad make a partial charge separation.
What is polar covalent bond?A covalent bond is formed between two non-metals through sharing of valence electrons between atoms. For example carbon and oxygen are non metals forming the covalent compound CO.
Electronegativity of an atom is its ability to attract the share pair of electrons towards its nucleus. Elements like oxygen, fluorine, nitrogen etc. are highly electronegative.
In a covalent compound, if the difference in electronegativity between two atoms is significant, the shared pair of electrons attracts towards the highly electronegative atom and resulting charge separation make them polar compounds.
Find more on covalent compounds:
https://brainly.com/question/21505413
#SPJ2
The discoverer of X-rays was(blank) The discoverer of radioactivity was (blank)
Answer:
The discoverer of X-rays was Wilhelm Conrad Roentgen.
The discoverer of radioactivity was Henri Bacquerel.
Explanation:
Wilhelm Conrad Roentgen discovered X-rays in early 1895. Roentgen observed a fluorescent glow of crystals on a table near his tube when he was working with a cathode-ray tube in his laboratory, The Cathode ray tube consisted of a glass envelope with positive and negative electrodes encapsulated in it. When a high voltage was applied the air in the tube was evacuated and hence the tube produced a fluorescent glow.
Becquerel had discovered radioactivity in 1896. To study the properties of x-rays he was using naturally fluorescent minerals. He exposed potassium uranyl sulfate to sunlight and then on photographic plates wrapped in black paper, he placed this. He believed that suns's energy would be absorbed by uranium which would then produce X rays. Without any Solar energy uranium emitted radiation because the images produce in this experiment were strong and clear.
Wilhelm Conrad Roentgen discovered X-rays in 1895 while investigating the external effects from the various types of vacuum tube equipment. His discovery was a significant scientific advancement because it marked the beginning of modern medical imaging. Roentgen was awarded the first Nobel Prize in Physics in 1901 for his work. Henri Becquerel discovered radioactivity in 1896. He was working with uranium salts when he found that they emitted rays that resembled X-rays in their penetrating power. Becquerel's discovery was accidental; he had stored a photographic plate in a dark drawer with a uranium salt and found that the plate became fogged. This led to the realization that uranium was emitting some form of radiation on its own, without any external excitation. Becquerel shared the 1903 Nobel Prize in Physics with Pierre and Marie Curie for their work on radioactivity
If 15 grams of Carbon dioxide is produced in a chemical reaction, how many grams of Carbon must be consumed in the reaction if we know there were 11 grams of Oxygen on the reactants side of the equation?
Answer:
4.13 g
Explanation:
Data Given:
Amount of CO₂ Produced = 15 g
Amount of Oxygen = 11 g
Amount of Carbon used = ?
Solution:
Suppose Carbon dioxide (CO₂) is formed by the reaction of carbon and oxygen then the reaction will be as below
C + O₂ -------------> CO₂
1 mol 1 mol 1 mol
we come to know from the above reaction that
1 mole of carbon react with 1 mole of oxygen to produce 1 mol of carbon dioxide.
molar mass of C = 12 g/mol
molar mass of O₂ = 32 g/mol
molar mass of CO₂ = 12 + 2(16) = 44 g/mol
if we represent mole in grams then
C + O₂ -------------> CO 1 mol (12 g/mol) 1 mol (32 g/mol) 1 mol (44 g/mol)
C + O₂ -------------> CO₂
12 g 32 g 44 g
So,
we come to know that 32 g of Oxygen combine with 12 g of oxygen produce 44 g CO₂
So now how much of Carbon will be combine with 11 g of oxygen
apply unity formula
32 g of O₂ ≅ 12 g of C
11 g of O₂ ≅ g of C
by doing cross multiplication
g of C = 12 g x 11 g / 32 g
g of C = 132 g / 32 g
g of C = 4.13 g
So,
4.13 g of carbon will consume to produce 15 g of Carbon dioxide.
to check this answer
we use the above information
12 g of C ≅ 44 g of CO₂
4.13 g of C ≅ g of CO₂
by doing cross multiplication
g of CO₂ = 44 g x 4.13 g / 12 g
g of CO₂ = 15g
So it is confirmed that
4.13 g of carbon will consume to produce 15 g of Carbon dioxide.
When someone’s immune system overreacts to something harmless it’s called:
A. A sneeze
B. The measles
C. An allergy
D. Overreactus maximus
When someone’s immune system overreacts to something harmless it’s called C. An allergy
What is an allergy ?Allergies are a type of hypersensitivity reaction. This means that the immune system reacts to a substance that is harmless to most people. The substance that triggers an allergic reaction is called an allergen.
Allergens can be found in a variety of things, including pollen, dust mites, pet dander, and food. When an allergen enters the body, the immune system releases chemicals, such as histamine, to fight it off. These chemicals can cause a variety of symptoms, including sneezing, runny nose, itchy eyes, hives, and difficulty breathing.
Option C is correct.
Find out more on allergies at https://brainly.com/question/8106617
#SPJ6
What would cause the pressure of a gas to increase?
Final answer:
The pressure of a gas can increase by adding more gas molecules, compressing the gas into a smaller volume, or raising the temperature, all of which lead to more forceful and frequent collisions between the molecules and the container walls.
Explanation:
The pressure of a gas can increase for several reasons. One primary factor is the addition of more gas molecules to a container while its volume remains constant. This increase in the number of molecules results in more frequent collisions with the container walls, thereby increasing the pressure. Similarly, when a gas is compressed into a smaller volume without changing the number of molecules, the pressure increase is due to the rise in the frequency of molecular collisions.
Another way the pressure of a gas can increase is through a rise in temperature. When the gas molecules are heated, they move faster and collide more vigorously with the container walls. This more forceful impact also increases the pressure within the container. Therefore, an increase in temperature or a decrease in volume, or an increase in the number of molecules can all lead to higher gas pressure.
how does gentrification work ?
Gentrification is a process of changing the character of a neighborhood through the influx of more affluent residents and businesses. ... The gentrification process is typically the result of increasing attraction to an area by people with higher incomes spilling over from neighboring cities, towns, or neighborhoods.
Gentrification is a socio-economic process where lower-status individuals' improvements to a neighborhood attract wealthier residents, leading to increased rents and potential displacement of the original residents. This can be explained economically by the Rent Gap Theory and is influenced by various factors, including lifestyle changes and media representation.
Explanation:Gentrification is a complex process often starting when lower social status individuals invest their effort (sweat equity) into revitalizing neighborhoods. Over time, these improvements make the neighborhood more appealing to middle and upper-class residents who begin moving in. This shift can lead to a rise in rents and property values, sometimes forcing existing working-class residents out due to affordability issues, a phenomenon referred to as displacement.
Displacement is a serious downside of gentrification, where less politically powerful citizens, often including local businesses, are pushed out from their homes and commercial spaces. This is particularly true in cities without rent control laws. Gentrification is not merely a process defined by the social or racial makeup alterations, but it is multifaceted, involving cultural shifts, economic pressures, real estate investments, and sometimes, unfortunately, an increase in tensions and violence, as seen in historical events like Tompkin's Square Park Riot.
From an economic standpoint, Neil Smith's Rent Gap Theory proposes that gentrification occurs when there's a significant difference between the current value of property and its potential value post-investment. This gap attracts investors to rejuvenate rundown areas. However, not all gentrification efforts are driven purely by economic incentives; they may also be influenced by changing lifestyles, demographic shifts, and even cultural representation in media.
1. What is the mass-percent of a solution that has 13.6 g of NaCl in 250.0 g of solution?
Answer:
Mass percent = 5.44 %
Explanation:
Given data:
Mass of solute (NaCl) = 13.6 g
Mass of solution = 250 g
Mass percent of solution = ?
Solution:
Formula:
Mass percent = mass of solute / mass of solution ×100
Mass percent = 13.6 g / 250 g × 100
Mass percent = 0.0544 × 100
Mass percent = 5.44 %
The mass percent of a solution containing 13.6 g of NaCl in 250.0 g of solution is 5.44%. This is calculated by dividing the mass of the solute (NaCl) by the total mass of the solution and multiplying by 100%.
Explanation:The mass percent of a solution can be calculated by dividing the mass of the solute by the total mass of the solution and then multiplying by 100%. In this case, the solute is NaCl (sodium chloride), and the mass is 13.6 g. The total mass of the solution is 250.0 g. Mass-percent = (Mass of solute / Total mass of solution) × 100% = (13.6 g / 250.0 g)× 100% = 5.44%.
Therefore, the mass percent of the solution that has 13.6 g of NaCl in 250.0 g of the solution is 5.44%.
Learn more about Mass-Percent here:https://brainly.com/question/34428429
#SPJ11
In scientific notation the radius of the sun is ......times 10..... kilometers
Answer:
The radius of the sun is 7x10^5 kilometers, and that of the Earth is about 6.4x10^3 kilometers. Use scientific notation to show that the Sun's radius is about 100 times the Earth's radius. The Sun's radius is 10^10 the Earth's radius.
In scientific notation, the radius of the sun is 109 times the radius of the Earth.
What is the radius of the sun?The sun is almost a perfectly shaped sphere. The equatorial diameter and the polar diameter of the sun differ only by only 6.2 miles or 10 km. The sun's mean radius is 432,450 miles or 696,000 kilometers.
According to this, the diameter would be about 864,938 miles or 1.392 million km. Around 109 Earths could be lined across the face of the sun. The circumference of the sun is about 2,715,396 miles or 4,370,006 km.
Sun is the biggest thing in our neighborhood or in our solar system. But, compared to other stars that have been observed, the sun is called an average star. Betelgeuse, which is a red giant, is about 700 times bigger than the sun and 14,000 times brighter. The classification of the sun is as a G-type main-sequence star or a G dwarf star,
Therefore, in scientific notation, the radius of the sun is 109 times the radius of the Earth.
Read more about the size of the sun, here
https://brainly.com/question/2455981
#SPJ2
Which statements describe abiotic factors in an environment? Check all that apply.
Chickens run around a farm.
Soil retains water and nutrients.
Several rocks rest in a stream.
Plants compete for sunlight in an ecosystem.
Clouds create shade that changes temperatures.
Soil retains water and nutrients.
Several rocks rest in a stream.
Clouds create shade that changes temperatures
Abiotic factors are non-living components in the environment, or rather components in the environment that are not derived from life.
Explanation:
Abiotic factors interact with biotic factors to create ecoystems. An example of biotic factors interacting with abiotic factors include plants utilizing sunlight for photosynthesis and a wild beast drinking water form a watering hole in the middle of the savanna.
Learn More:
For more on biotic and abiotic factors check out;
https://brainly.com/question/11015328
https://brainly.com/question/11483587
https://brainly.com/question/1542938
https://brainly.com/question/12689972
https://brainly.com/question/935464
#LearnWithBrainly
Final answer:
Abiotic factors are nonliving elements in an environment such as soil, rocks, and clouds, and are essential in shaping ecosystems.
Explanation:
The abiotic factors in an environment include the nonliving components that shape the ecosystem. The statements that describe abiotic factors are:
Soil retains water and nutrients.Several rocks rest in a stream.Clouds create shade that changes temperatures.These elements such as soil, rocks, and clouds are crucial in determining the overall health of the ecosystem and which organisms can survive there. On the other hand, chickens running around a farm and plants competing for sunlight are examples of biotic factors, as they involve living organisms interacting within their environment.
2-- What is the [H3O+] in a solution with [OH-] = 1 x 10-12 M?
Answer:
The answer is 0.01 M
Explanation:
The problem is solved by applying the expression for ionic product of water as follows:
Kw = [H₃O⁺] [OH⁻]
Where Kw is the ionic product of water and it is 1.10⁻¹⁴ M at⁴ 25ºC. As [OH⁻]= 1.10⁻¹² M, [H₃O⁺] will be:
[H₃O⁺]= Kw/ [OH⁻]= 1.10⁻¹⁴M/1.10⁻¹²M= 0.01 M
convert 9.78 gallons toliters
Answer:
44.46076 litres
Explanation:
Answer:
about 37.02 Liters
Explanation:
The conversion rate is about 3.785. 9.78*3.785~37.02
8. If the distance between the Earth and the Sun
were increased, which change would occur?
A) The apparent diameter of the Sun would
decrease.
B) The amount of insolation received by the
Earth would increase.
C) The time for one Earth rotation (rotation
period) would double.
D) The time for one Earth revolution (orbital
period) would decrease.
Answer:
Option C. Time for one Earth rotation would double.
Explanation:
If the distance between Earth and Sun is increased up then it will decrease the gravitational pull of the Sun and hence will increase the orbital period of the Earth and will also increase the time taken for one Earth rotation because rotation of Earth is primarily depend on the external torque from the gravity of the Sun, Moon and other celestial bodies.
The Lewis structure for CIF^2+ is shown. What is the electron-pair geometry and the molecular geometry around the central atom
1:electron pair geometry->trigonal pyramid
2: molecular pair geometry->linear
According to molecular geometry, the electron pair geometry is trigonal pyramid and molecular pair geometry is linear.
Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.
It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.
Learn more about molecular geometry,here:
https://brainly.com/question/31323866
#SPJ6
How is the modern periodic table arranged?
by increasing electronegativity
by increasing atomic number
by increase in atomic mass
by increasing ionic size
The modern periodic table is arranged by increasing atomic number, which corresponds to the number of protons in an atom. Each box represents an element and displays various details about it. The table also shows patterns and periodic trends in the properties of elements.
Explanation:The modern periodic table is primarily arranged by increasing atomic number, which directly corresponds to the number of protons in an atom. The table is composed of rows (periods) and columns(groups). Elements that share many of the same chemical properties are grouped into the same columns. As we traverse each period from left to right, a proton is added to the nucleus and an electron to the valence shell of each successive element. The trend changes as you go down a group; the number of electrons in the valence shell remains constant, while the principal quantum number increases by one each time.
Each box in the table represents an element and includes its atomic number, symbol, average atomic mass, and sometimes its name. Elements are arranged in seven horizontal rows and 18 vertical columns. Patterns in chemical properties are also observable in the periodic table. For instance, as we move down a group, the metallic character of the elements increases, signifying a periodic trend in the elements' properties.
Learn more about Modern Periodic Table here:https://brainly.com/question/35897164
#SPJ11
If the chemical equation below is balanced, what number would go in front of hydrochloric acid (HCD?
_CuCl2 + H2S → _Cus + _HCI
Coefficient 2 on HCl
Balanced equation: CuCl₂ + H₂S → CuS + 2HCI
Explanation:We are required to balance the chemical equation given;
The equation is;CuCl₂ + H₂S → CuS + HCI
Balancing chemical equations involves putting appropriate coefficients on the products and reactants involved in a chemical reactions.It ensures that the number of atoms of each element is equal; on both sides of a chemical equation.In our case;
To balance the chemical equation, we put coefficients; 1, 1, 1, 2 on CuCl₂, H₂S, CuS and HCl respectively.Therefore, the balanced equation will be;CuCl₂ + H₂S → CuS + 2HCI
The equation now obeys the law of conservation of mass which requires the mass of reactants be equal to the mass of products.a 280.0 mL sample of neon exerts a pressure of 660.0 toff at 26.0 celsius. at what temperture would it exert a pressure of 940.0 torr in a volume of 0.44 L
Answer:
T₂ = 669.2 K
Explanation:
Given data:
Initial pressure = 660 torr
Initial temperature = 26 °C (26 +273 = 299 K)
Final volume = 280 mL ( 280/1000 = 0.28 L)
Final pressure = 940.0 torr
Final volume = 0.44 L
Final temperature = ?
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
P₁V₁/T₁ = P₂V₂/T₂
T₂ = P₂V₂ T₁ /P₁V₁
T₂ = 940 torr × 0.44 L × 299 K / 660 torr × 0.28 L
T₂ = 123666. 4 torr. L. K / 184.8 torr. L
T₂ = 669.2 K
6.
A gas occupies a volume of 224 cm and a pressure of 1.51 bars. If the gas expands to a volume of 578 cm,
what will the new pressure be? (Assume the temperature remains constant.)
Answer:
The new pressure is 0.5852 bar
Explanation:
Since the temperature is constant, we can apply Boyle's Law.
Boyle's Law states that at constant temperature, pV = constant
[tex]p_{1}V_{1}=p_{2}V_{2}\\p_{1}=1.51\:bar\\V_{1}=224cm^{2}\\V_{2}=578cm^{2}\\Let\:p_{2}\:be\:the\:new\:pressure.\\p_{2}=\frac{p_{1}V_{1}}{V_{2}}=\frac{1.51\times224}{578}\\ p_{2}=0.5852\:bar[/tex]
Therefore, the new pressure is 0.5852 bar
PPPLLLZZZZ HAAAALLLLPPP
Answer:
C. carbon dioxide and water
Explanation:
Water is a small molecule that easily diffuses through a cell membrane (osmosis) despite the lipid tails. Oxygen is a small molecule and it’s nonpolar, so it easily passes through a cell membrane. Carbon dioxide, the byproduct of cell respiration, is small enough to readily diffuse out of a cell.
Which of the following is an example of energy causing motion?
A. bowling ball on a ball stand
B. boy holding a bowling ball
C. rolling ball scattering the bowling pins
D. Bowling pins scattered on the ground
Answer:
the answer is c
Explanation:
Answer:
C
Explanation:
The bowling ball has energy in order to to move and hits the pins causing them to scatter (motion)
Sensory neurons do what job?
Answer: Sensory neurons are nerve cells within the nervous system responsible for converting external stimuli from the organism's environment into internal electrical impulses. For example, some sensory neurons respond to tactile stimuli and can activate motor neurons in order to achieve muscle contraction.
Explanation:
Answer:
Sensory neurons are what is known as the nerve cells. They are found within the nervous system. They respond to tactile stimuli and can activate motor neurons in order to achieve muscle contraction.
The volume of a gas is 250ml at 3.6 atm. What will the volume be when the pressure is reduced to 0.75 atm?
Answer:
V₂ = 1200 mL
Explanation:
Given data:
Volume of gas = 250 mL
Pressure of gas = 3.6 atm
Final pressure = 0.75 atm
Final volume = ?
Solution:
P₁V₁ = P₂V₂
V₂ = P₁V₁ /P₂
V₂ = 3.6 atm . 250 mL /0.75 atm
V₂ = 900 atm. mL /0.75 atm
V₂ = 1200 mL
A hydrated form of copper sulfate (CuSO4⋅xH2O) is heated to drive off all of the water. If there is initially 9.42g of hydrated salt and there is 5.26g of anhydrous CuSO4 after heating, find the number of water molecules associated with each CuSO4 formula unit.
Answer:
CuSO₄. 7 H₂O
Explanation:
Given data:
Mass of anhydrous CuSO₄ = 5.26 g
Mass of hydrated CuSO₄ = 9.42 g
Number of water molecules associated with CuSO₄ = ?
Solution:
Mass of water = 9.42 g - 5.26 g = 4.16 g
Number of moles of water = mass/ molar mass
Number of moles of water = 4.16 g/ 18 g/mol
Number of moles of water = 0.23 mol
Number of moles of CuSO₄:
Number of moles = mass/ molar mass
Number of moles = 5.26 g/ 159.61 g/mol
Number of moles = 0.033 mol
Number of moles of water per mole of CuSO₄:
Number of moles of water/ number of moles of CuSO₄
0.23 mol/ 0.033 mol
7 moles
CuSO₄. 7 H₂O