What feature appears at point A on the topographic map?
depression
swamp
road
school

Answer:

Increasing the distance

Explanation:

I dont know if this is right but i think it is since the magnets works at a distance so moving it away is the answer i think.

Answer:

it D and A

Explanation:

I solved this on study island before

At the temperature of the North Pole on December 21 (-60°F) an object radiates the least amount of electromagnetic energy.

Electromagnetic radiation consists of waves of the electromagnetic field, which pass through space and carry radiant energy. It involves microwaves, radio waves, infrared, visible light, UV radiation, X-rays, and gamma rays.

Electromagnetic radiation exhibit electromagnetic waves, which oscillate with the electric as well as magnetic fields. Electromagnetic waves are generated due to periodic motion in the electric field or magnetic field.

Depending on the periodic change in these waves that happens and the power formed, different wavelengths of the electromagnetic spectrum are generated. The effects of electromagnetic radiation on chemical compounds and biological organisms depend on the power of electromagnetic radiation and its frequency.  

In order of increasing frequency of radiations and decreasing wavelength of radiations, these waves are arranged in the electromagnetic spectrum.

Learn more about electromagnetic radiation, here:

brainly.com/question/10759891

#SPJ2

Answer:

chlorine gas and oxygen

The solution which could be with 0.1 M NaOH is solution "C"

Explanation:

Answer: 0.0250

Explanation: 10 X 0.0750 = .75

.75 / 30 = 0.0250 M

The concentration of KOH(aq) solution is 0.025 M.

In this titration, the volume and concentration of HCl(aq) are given as 10.0 ml and 0.0750 M, respectively. The volume of KOH(aq) is given as 30.0 ml. To find the concentration of KOH(aq) solution, we can use the concept of stoichiometry and the balanced equation for the reaction:

HCl(aq) + KOH(aq) → H2O(l) + KCl(aq)

From the balanced equation, we can see that the ratio of moles of HCl to KOH is 1:1. Therefore, the moles of KOH can be calculated as:

moles of KOH = moles of HCl = volume of HCl × concentration of HCl

Substituting the values:

moles of KOH = 10.0 ml × 0.0750 M = 0.750 mol

The concentration of KOH(aq) solution can be calculated using the moles of KOH and the volume of KOH(aq) solution:

concentration of KOH = moles of KOH / volume of KOH(aq)

Substituting the values:

concentration of KOH = 0.750 mol / 30.0 ml = 0.025 M

https://brainly.com/question/38139486

#SPJ11

Answer:

Climate change can affect coastal areas in a variety of ways

Explanation:

Final answer:

Global warming leads to sea level rise and extreme weather, threatening coastal communities with flooding, erosion, loss of habitat, and freshwater scarcity. Infrastructure must adapt, but preventive action, including reducing greenhouse gas emissions, is essential.

Explanation:

The negative impacts of global warming on coastal communities are profound and long-lasting. With current sea levels rising by approximately 0.25 meters, coastal cities face increased vulnerability to storm surges, which are exacerbated by high tides and heavy waves during storms. This not only threatens human structures but also contributes to the loss of biodiversity as ecosystems are disrupted. Furthermore, as the planet warms, polar ice caps and glaciers continue to melt, leading to a predicted rise in sea levels of two to four feet by 2100. This would result in widespread inundation of shorelines, reduction of island sizes, and possible disappearance of some islands. The alteration in the freeze-thaw cycle of the poles and glaciers may also lead to a lack of freshwater resources and an abundance of saltwater.

Changing patterns of precipitation due to climate change will require reconstruction of water management and food production infrastructures, with further impacts on ecosystems. The changing water flows can lead to the clearing of new areas for agriculture, road construction, and other developments, potentially impacting natural habitats and leading to a shift in biodiversity. Additionally, warming could introduce new economic activities in previously inaccessible Arctic regions, inevitably leading to further environmental degradation through infrastructure development.

Answer:

True

Explanation:

Glaciers are form when the snow is melted and starts to run down the lake or in form of water making it the glacier.

Answer:true

Explanation: graciers need to move

Answer:

T initial =  19.55°C

Explanation:

Given data:

Mass of Al = 35 g

Energy produces = 781.2 J

Final temperature = 44.3°C

Initial temperature = ?

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Specific heat capacity of Al is 0.902 J/g.°C

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT = Final temperature - initial temperature

Q = m.c. ΔT

781.2 J = 35 g×0.902 J/g.°C× (T final - T initial)

781.2 J = 35 g×0.902 J/g.°C× (44.3°C -T initial )

781.2 J = 31.57 j/°C× (44.3°C -T initial )

781.2 J/ 31.57 j/°C = (44.3°C -T initial )

24.75°C = (44.3°C -T initial )

24.75° - 44.3°C = -T initial

T initial =  19.55°C

Answer:

The answer is A

Explanation:

I checked on a temperature converter calculator.

Answer:

100 Kelvin, 0 degrees Celsius, 32 degrees Fahrenheit.

Explanation:

Answer:

The answer is 74.5%.

Explanation:

As we know that % yield=  [tex]\frac{actual yield}{theoretical yield}[/tex] x 100%.

Therefore,

Step 1 Calculate Theoretical yield:

0.112[tex]H_{2}[/tex] x   [tex]\frac{1 mol H_{2} }{2.016 g of H{2} }[/tex]    x    [tex]\frac{4 mol H_{2}O }{4 mol H_{2} }[/tex]    x  [tex]\frac{18.02 g H_{2}O }{1 mol H_{2}O}[/tex]   = 1.001 g [tex]H_{2}O[/tex]

Now Step 2

% yield   =  [tex]\frac{actual yield}{theoretical yield}[/tex] x 100% =   [tex]\frac{0.745g}{1.001g}[/tex] = 74.5%

Final answer:

To calculate the percent yield, compare the actual yield of H2O (0.745 grams) to the theoretical yield determined by stoichiometry and molar masses of reactants and products.

Explanation:

The student is asking how to calculate the percent yield of a chemical reaction. In this chemical reaction, 0.112 grams of hydrogen (H2) produces 0.745 grams of water (H2O). To find the percent yield, first we need to calculate the theoretical yield based on the stoichiometry of the reaction; then we compare the actual yield (0.745 grams) to the theoretical yield. The theoretical yield is calculated using the molar mass of H2 and H2O, converting grams of H2 to moles, and then using the stoichiometry given by the balanced equation to find the moles of H2O produced. These moles are then converted back to grams. The percent yield is the (actual yield / theoretical yield) x 100%. The stoichiometry of 4H2O to 4H2 implies a 1:1 mole ratio. Using the molar mass of H2 (approximately 2.02 g/mol) and H2O (approximately 18.015 g/mol), we can calculate the theoretical yield and then the percent yield.

Answer:

Explanation:

The translated question is:

What maximum amount of grams of potassium nitrate (V) can be dissolved in 300g of water at 90 °C

To answer the question you need to consultate the solubiity information for potassium nitrate (V), KNO₃.

The attached table contains the solutibility table for KNO₃ at different temperatures.

At 90ºC it is 203g / 100g water.

Then, to calculate the maximum amount of grams of potassium nitrate (V) that can be dissolved in 300g of water at 90 °C, just multiply by the amount of water:

Answer:

Because both of them are Diatomic molecules.

Explanation:

Answer:I believe it is the Senate

Explanation:

Answer:

C) committee consideration.

Explanation:

Have a nice day :)

Answer:

a is the correct answer

Explanation:

i just did this question and it said a was right

The number of moles of aluminum sulfate produced from the 5.8 moles of aluminum hydroxide and excess sulfuric acid is 2.9 moles.

The balanced chemical equation can be given as:

2 Al(OH)₃ + 3 H₂SO₄ [tex]\rightarrow[/tex] Al₂(SO₄)₃ + 6 H₂O

In the above reaction, the stoichiometry of the amounts of each compound participating in the reaction is:

Al(OH)₃ - 2 moles

H₂SO₄ -  3 moles

Al₂(SO₄)₃ - 1 mole

H₂O - 6 moles

From the above observation, it can be assumed that for every 2 moles of aluminum hydroxide produce 1 mole of aluminum sulfate.

Then, the number of moles produced by 5.8 moles of aluminum hydroxide is x.

[tex]\text{moles of Al}_{2} (\text{SO}_{4} ){3} =\dfrac{\text{5.8moles of Al(OH)}_{3} \times \text {1 mole of Al}_{2} (\text {SO}_{4} ){3}}{\text {2moles of Al(OH)}_{3}}[/tex]

Thus, 2.9 moles of aluminum hydroxide will be produced from the 5.8 moles of aluminum hydroxide.

To know more about moles, refer to the following link:

https://brainly.com/question/20486415

13.5 is the new concentration of this solution if it is boiled down to a

volume of 1.0 L.

Explanation:

Data given:

Initial volume of the solution of sea water = 2.5 litre

Molarity of NaCl solution M1 = 5.4 M

fInal volume = 1 litre

final molarity = ?

Assuming that no loss of NaCl from sea water took place when the sea water was boiled.

applying the formula for change in concentration as:

Minitial V initial = Mfinal X Vfinal

M final = [tex]\frac{M initial X V initial}{V final}[/tex]

Putting the values in the equation:

Mfinal = [tex]\frac{5.4 X 2.5}{1}[/tex]

M final = 13.5 M

thus it can be concluded that molarity will increase drastically when volume gets reduced from 2.5 litre to 1 litre. The solution becomes highly concentrated as water volume decreases due to evaporation.

The new concentration of a seawater solution initially at 5.4 M and 2.5 L volume, after boiling down to 1.0 L, is calculated to be 13.5 M using the principle of conservation of mass and the formula M1V1 = M2V2.

The question involves calculating the new concentration of a solution when its volume changes due to boiling. A 2.5 L sample of seawater with NaCl concentration of 5.4 M is reduced to 1.0 L after boiling. To find the new concentration, we use the principle of conservation of mass, which implies that the amount of solute (NaCl) remains constant even as the volume changes. Using the formula M1V1 = M2V2, where M1 and V1 are the initial concentration and volume, and M2 and V2 are the final concentration and volume, we can calculate the new concentration after boiling down to 1.0 L.

Initial information: M1 = 5.4 M, V1 = 2.5 L, V2 = 1.0 L.

Calculation: To find M2, rearrange the formula to M2 = (M1V1) / V2. Therefore, M2 = (5.4 M * 2.5 L) / 1.0 L = 13.5 M.

The new concentration of the NaCl solution after being boiled down to 1.0 L is 13.5 M. This demonstrates how the concentration of a solution increases as the volume decreases, provided no solute is added or removed.

Answer:

Q17. D

Explanation:

A single line between 2 atoms represent a single covalent bond between a pair of electrons. There are 17 lines in the diagram hence there are 17 bonding pairs of electrons in the molecule.

Do count the double bond as 2 bonding pairs of electrons.

Answer:

Radioactive decay is the spontaneous breakdown of a nucleus into smaller parts

Explanation:

Answer:

the number of atoms in the product is the same as the number of atoms in the reactant

Explanation:

In the product, there are a total of 10 atoms, whereas in the reactant, there are also a total of 10 atoms, the number of atoms in the product is the same as the number of atoms in the reactant.

There is an increase in the frequency of particle collisions which leads to the increased rate of the reaction.

Explanation:

Hydrochloric acid reacts faster with the powdered zinc than with the equal mass of zinc strips.  

Since the surface area of the Zinc particle increases when it is powdered and has more active spots when compared to less number of active sites in Zinc strips and so the number of collision between the Zinc particles and the particles of Hydrochloric acid also increases and consequently the rate of the reaction also enhances.

So there is an increase in the frequency of particle collisions.

The molecular formula for hexaboron monosilicide is B6Si, which indicates the compound contains six boron atoms and one silicon atom.

The hexaboron monosilicide formula is B6Si. This formula denotes that there are six atoms of boron (B) and one atom of silicon (Si) in a molecule of hexaboron monosilicide.

It is identified as hexaboron because of the prefix 'hexa-' which signifies six in chemical nomenclature, referring to the six boron atoms. Similarly, the use of 'mono-' in monosilicide represents one silicon atom.

This compound exists in crystalline form as a superhard material, and is often studied in the field of material science.

https://brainly.com/question/20378425

#SPJ6

Answer:

475.26°C

Explanation:

Given parameters:

Mass of object = 50g

Specific heat  = 0.3825J/g°C

Quantity of heat  = 4593Joules

Initial temperature  = 235.16°C

Unknown:

Final temperature = ?

Solution:

The quantity of heat absorbed by a body is a function of the mass, specific heat capacity and temperature change the body undergoes.

Mathematically, this relationship is given as;

              H  = m c Ф

where H is the quantity of heat

           m is the mass of the body

            c is the specific heat capacity

            Ф is the temperature difference

Ф  = final temperature - initial temperature

  Since we are solving for final temperature, let us substitute for other given parameters;

    H  =  m c ( final temperature - initial temperature)

       4593  = 50 x 0.3825 x (F  - 235.16)

       F - 235.16  = 240.1

             F  = 240.1 + 235.16 = 475.26°C

Answer:

6

Explanation:

According to the balanced chemical equation, there are six chlorine atoms on the product side.

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ6

Answer:

Metaloids and metals.

Answer:

Bronsted-Lowry

Explanation:

brainliest please ?

Answer:

Coal mining can compromised a lot of our resources one of it is the soil. It is because it eliminates the nutrients of the soil that can affect the vegetation, it destroys the wildlife and habitat. Also, it changes permanently the topography of the area mined.

Explanation:

edge 2020 just did it

One resource that is often compromised due to mining is water, as mining have significant effect on quality and quantity of water.

Resources are anything that can be used to satisfy a need or want. Resources can be natural, such as land, water, minerals, and wildlife, or they can be human made, such as tools, machines, buildings, and infrastructure.

Mining activities can have significant impacts on water quality and quantity, especially in areas with limited water resources or sensitive ecosystems.

Water can become contaminated by chemicals and heavy metals used in mining, such as cyanide, sulfuric acid, and mercury, which can have harmful effects on aquatic life and human health. Mining can also consume large amounts of water for processing and dust suppression, which can exacerbate water scarcity and competition with other users, such as agriculture and urban areas.

Therefore, mining can have significant impacts on water resources, which are essential for human health, ecosystem functioning, and economic development.

Learn more about resources here:

https://brainly.com/question/32981679

#SPJ2

Answer: increasing atomic number

Explanation: Elements are arranged left to right, top to bottom, from smallest to largest, of increasing atomic number.

Answer:

We will use ideal gas equation in this problem

PV = nRT

Where

P = pressure of gas or air = ?

V = volume of air = volume of pressure cooker = 5.68 L

T = temperature = 394 K

n = moles of air = 0.355

R = ideal gas equation = 0.0821 L atm / mol K

Putting values

Pressure = nRT / V = 0.355 X 0.0821 X 394 / 5.68 = 2.02 atm.