When the equation below is correctly balanced, the coefficient for K2SO4 is?

Final answer:

The total ionic equation for the neutralization reaction of ammonium hydroxide with hydrochloric acid expresses all components as ions and after removing spectator ions, the net ionic equation is OH⁻(aq) + H⁺(aq) → H₂O(l).

Explanation:

To write the total ionic equation for the neutralization reaction of ammonium hydroxide (NH₄OH) with hydrochloric acid (HCl), we need to express all soluble substances as ions. Ammonium hydroxide can be represented as NH₄⁺(aq) and OH⁻(aq) since it partially dissociates in solution. The hydrochloric acid fully dissociates into H⁺(aq) and Cl⁻(aq).

The total ionic equation is as follows:

NH₄⁺(aq) + OH⁻(aq) + H⁺(aq) + Cl⁻(aq) → NH₄⁺(aq) + Cl⁻(aq) + 2H₂O(l)

The net ionic equation, which shows the actual chemical change, is produced by removing the spectator ions (NH₄⁺ and Cl-), resulting in: OH⁻(aq) + H⁺(aq) → H₂O(l)

Final answer:

The total ionic equation for the neutralization reaction between ammonium hydroxide and hydrochloric acid is NH4+(aq) + OH-(aq) + H+(aq) + Cl-(aq) → NH4+(aq) + Cl-(aq) + H2O(l), with H+(aq) + OH-(aq) → H2O(l) as the net ionic equation.

Explanation:

The total ionic equation for the neutralization reaction of ammonium hydroxide (NH4OH) with hydrochloric acid (HCl) shows each species in its ionic form. The reactants ammonium hydroxide and hydrochloric acid dissociate in water to form NH4+ (aq), OH- (aq), H+ (aq), and Cl- (aq). In a complete ionic equation, all of the ions are shown as they exist in solution before and after the reaction:

NH4+ (aq) + OH- (aq) + H+ (aq) + Cl- (aq) → NH4+ (aq) + Cl- (aq) + H2O(l)

After the reaction, ammonium ions and chloride ions remain in solution while water is formed as the product. However, since ammonium ions (NH4+) are spectator ions in this reaction, they can be omitted to provide the net ionic equation:

H+ (aq) + OH- (aq) → H2O(l)

The net ionic equation indicates that the hydrogen ions (H+ from the hydrochloric acid) combine with the hydroxide ions (OH- from the ammonium hydroxide) to form water, which is a characteristic outcome of a neutralization reaction.

Answer:

The rate of temperature change does not stay constant and decreases over time because the temperature difference decreases over time.

Explanation:

The temperature difference is due to Thermal Equilibrium

Answer:

The answer is Flourine

Answer:

One atom or more changes into atoms of another element.New subtances with different properties are formed.

Answer:

B. New substances with different properties are formed

C. Solids, Liquids, or gases may form

Explanation:

Edg 2020

Answer:

The correct order of increasing standard molar entropy for the noble gases is He ≤ Ne ≤ Ar ≤ Kr

Explanation:

Entropy is the measure of degree of disorderliness or randomness of a substance. Entropy increases with increasing number of electron present in an atom due to increased repulsive force of the electrons. Therefore, the standard entropy of a substance increases with an increase in their atomic masses.

For the given noble gases in this question, Helium (He) has the least atomic mass while Krypton (Kr) has the highest atomic mass.

Thus, the correct order of increasing standard molar entropy for the noble gases is He ≤ Ne ≤ Ar ≤ Kr

Final answer:

The increasing standard molar entropy for noble gases is He ≤ Ne ≤ Ar ≤ Kr, due to growing atomic number and electronic complexity down the group.

Explanation:

The correct order of increasing standard molar entropy for the noble gases is He ≤ Ne ≤ Ar ≤ Kr. This is because entropy generally increases with atomic number due to increased electronic complexity and atomic mass. As you move down the group in the periodic table, noble gases have more electrons that can occupy a greater volume of space and therefore have higher entropy.

Answer:

The correct answer is A

We'll have 2.0 moles of magnesium nitride produced  and and excess of 2.0 moles nitrogen gas

Explanation:

Step 1: Data given

Number of moles nitrogen gas (N2) = 4.0 moles

Number of moles magnesium = 6.0 moles

Step 2: The balanced equation

3Mg + N2 → Mg3N2

Step 3: Calculate the limiting reactant

For 3 molesmagnesium (Mg) we need 1 mol nitrogen gas  (N2) to react, to produce 1 mol magnesium nitride (Mg3N2)

Magnesium is the limiting reactant. It will completely be consumed 6.0 moles. Nitrogen is in excess. There will react 6.0 / 3 = 2.0 moles

There will remain 4.0 - 2.0 = 2.0 moles N2

Step4: Calculate moles Mg3N2

For 3 molesmagnesium (Mg) we need 1 mol nitrogen gas  (N2) to react, to produce 1 mol magnesium nitride (Mg3N2)

For 6.0 moles Mg we'll have 6.0 / 3 = 2.0 moles Mg3N2

The correct answer is A

We'll have 2.0 moles of magnesium nitride produced  and and excess of 2.0 moles nitrogen gas

The correct answer is a. 2.0 moles of magnesium nitride are formed when 6.0 moles of magnesium react with 4.0 moles of nitrogen, leaving 2.0 moles of nitrogen unreacted as excess.

The formation of magnesium nitride involves a reaction between magnesium metal and nitrogen gas. Magnesium forms a Mg2+ ion, which is a cation, by losing two electrons. Nitrogen, a non-metal, forms an anion with a charge of 3-. Therefore, the formula for magnesium nitride is Mg3N2, indicating that three magnesium ions react with two nitrogen ions to form one formula unit of magnesium nitride.

The balanced chemical equation for the formation of magnesium nitride is:

3Mg + N2 → Mg3N2

Given that 4.0 moles of nitrogen is reacted with 6.0 moles of magnesium, we can determine the limiting reactant and calculate the product formed. The molar ratio of Mg to N2 in the equation is 3:1, meaning three moles of Mg are required for every mole of N2. Therefore, 6.0 moles of Mg would completely react with 2.0 moles of N2 to produce magnesium nitride. Since we started with 4.0 moles of nitrogen, we have an excess of nitrogen, and magnesium is the limiting reactant.

The result is that all of the magnesium reacts and you would produce 2.0 moles of magnesium nitride with 2.0 moles of nitrogen left over as excess. Hence, the correct answer to the student's question is option a.

Answer:

A. Fe2+

Explanation:

other answer was wrong

[tex]Fe^{2+}[/tex] is the most likely to be reduced. Hence, option A is correct.

Oxidation: The loss of electrons

Reduction: The gain of electrons

Oxidation number: the charge based on the number of electrons assigned to an atom as compared to the neutral atom.

[tex]Fe^{2+}[/tex] oxidize to [tex]Fe^{3+}[/tex] because removing the electron results in a half-filled d subshell.

Hence, option A is correct.

Learn more about the oxidation number here:

brainly.com/question/13182308

#SPJ2

Answer:Deposition is the dropping of sediment by wind, water, ice, or gravity.

Explanation:

When thermal energy is added to a substance, its temperature increases, which can change its state from solid to liquid

Answer:

Answer:

The answer to your question is below

Explanation:

Electronegativity is a measure of how strongly atoms attract electrons to themselves.

Process

Look for the electronegativity of each element and compare.

a) Cl = 3.16   F = 3.98          Fluorine has a higher electronegativity

b) Se = 2.55 O = 3.44         Oxygen has a higher electronegativity

c) N = 3.04 As = 2.18         Nitrogen has a higher electronegativity

d) Na = 0.93 Mg = 1.31       Magnesium has a higher electronegativity

The more electronegative elements among the pairs are F (fluorine), O (oxygen), N (nitrogen), and Na (sodium). These are determined based on their positions in the periodic table, where electronegativity generally increases from left to right and decreases from top to bottom.

Electronegativity is a measure of the ability of an atom to attract a bonding pair of electrons. The Pauling scale is the most commonly used electronegativity scale and it ranges from 0 to 4.

Generally, electronegativity increases from left to right across a period and decreases moving down a group or column in the periodic table. Therefore, elements on the top right corner of the periodic table (excluding noble gases) are the most electronegative.

https://brainly.com/question/35593282

#SPJ3

Answer:

the fraction of CO reacted is 0.76 or 76.0 %

Explanation:

Step 1: Data given

a new catalyst combines a 2.0 : 1.0 mole ratio mixture of carbon monoxide and oxygen gas

Volume = 2.45 L

Total pressure = 740 torr

Temperature = 552 °C = 825 K

Pressure decreases to 552 torr

Step 2: The balanced equation

2CO(g) + O2 (g) --> 2CO2(g)

Step 3: Calculate the percentage of the CO was converted to CO2

P1/n1 = P2/n2

⇒P1 = the initial pressure = 740 torr

⇒n1 = the initial number of moles = 2.0 moles CO and 1 mol of O2 = 3.0 moles

⇒P2 = the final pressure = 552 torr

⇒n2 = the final number of moles = TO BE DETERMINED

n2 = n1 * P2/P1

n2 =3.0 * 552 torr / 740 torr

n2 = 2.24 moles

Step 4: Calculate total moles of CO

Suppose X = the fraction of CO

final = 2*(x) + 3*(1-x)

2.24 = 2x + 3 - 3x

2.24 = -X + 3

-0.76 = -X

X = 0.76

This means the fraction of CO reacted is 0.76 or 76.0 %

The fraction or the percentage of the carbon monoxide converted to carbon dioxide is 76%.

Given:

Ratio of new catalyst to the mole ratio of carbon dioxide and oxygen  = 2:1

Volume = 2.45 L

Temperature = 825 K

Pressure = 740 torr

The reaction is:

2CO(g) + O₂ (g) [tex]\rightarrow[/tex] 2CO₂

From the reaction, the amount of CO converted into carbon dioxide is:

[tex]\dfrac{\text{P}_1}{\text n _1}&=\dfrac{\text{P}_2}{\text n _2}[/tex]

Where,

P₁ = initial pressure

n₁ = number of moles (initial)

P₂ = final pressure

n₂ = final number of moles

Now, calculating the n₂:

[tex]\text n_2 &= \dfrac{\text n_1 \times \text P_2}{\text P_1}[/tex]

[tex]\text n_2 &= \dfrac{3 \times 552}{740}[/tex]

n₂ = 2.24 moles.

Now, the total moles of carbon monoxide is:

2.24 = 2 x Y + 3 x (1 - Y)

2.24 = 2Y + 3 - 3Y

Y = 0.76

Thus, the number of a fraction of CO is 0.76.

To know more about moles, refer to the following link:

https://brainly.com/question/20486415

Answer:

Dissolve: to terminate a union of multiple members actively, as by disbanding

Final answer:

To correct a high Rf value of 0.95 in TLC, decrease the polarity of the mobile phase by using a less polar solvent and ensure the sample is not too concentrated for improved separation and accurate Rf values.

Explanation:

When running Thin Layer Chromatography (TLC), a high Rf value of 0.95 implies that the sample has moved almost as far as the solvent front, suggesting that the mobile phase is too polar. To correct this and achieve better separation, the polarity of the mobile phase should be decreased.

Using a less polar solvent, such as a mixture of hexanes and ethyl acetate, instead of pure acetone might provide better separation of the components 1-octene and 1, 4-dimethylbenzene.

Additionally, ensuring that the samples are not too concentrated can lead to more accurate Rf values and better spot definition. A correctly run TLC should show the desired component with an Rf around 0.35, separated from other spots by at least 0.2 Rf units.

Answer:

Mole fraction of [tex]NH_{3}[/tex] in solution is 0.0597.

Explanation:

Molar mass of [tex]NH_{3}[/tex] = 17.031 g/mol

Molar mass of [tex]H_{2}O[/tex] = 18.015 g/mol

No. of moles = (mass)/(molar mass)

So, 15.0 g of [tex]NH_{3}[/tex] = [tex]\frac{15.0}{17.031}[/tex] moles of [tex]NH_{3}[/tex] = 0.8807 moles of [tex]NH_{3}[/tex]

      250 g of [tex]H_{2}O[/tex] = [tex]\frac{250}{18.015}[/tex] moles of [tex]H_{2}O[/tex] = 13.88 moles of [tex]H_{2}O[/tex]

So, Mole fraction of [tex]NH_{3}[/tex] in the solution = (no.of moles of [tex]NH_{3}[/tex] )/(total no. of moles) = [tex]\frac{0.8807}{0.8807+13.88}[/tex] = 0.0597

Hence, mole fraction of [tex]NH_{3}[/tex] in solution is 0.0597.

Bromelain separates the amino acids in the enzymes that cause browning by breaking the peptide bonds. The pH of a solution determines the charge of certain R groups.

Amino acids are defined as the substances which are considered to be the monomers of proteins.Every amino acid has the same structure consisting of a central carbon which is bonded to an amino group , carboxyl group and a hydrogen.

Each amino acid also has another atom or a group of atoms bonded to the alpha carbon which are also known as the R group or the variable group of the side chain.There are 20 common amino acids present in natural proteins and each amino acid has the same backbone.

Learn more about amino acids,here:

https://brainly.com/question/31872499

#SPJ12

Answer:

A)They both exhibit hydrogen bonding. However, water has more hydrogens available for hydrogen bonding. Therefore, it requires more heat energy to convert it from a liquid to a gas

Explanation:

USA Test Prep Answer

Answer: nitric acid

Explanation:

The solution with the lowest pH would mean that it is an acid, specifically a strong acid which completely dissociates into ions in aqueous solution. The answer it is nitric acid (HCl) that will have the lowest pH because it is the only strong acid in the group

Answer:

takes place in the glomerulus

Explanation:

which is the vascular beginning of the nephron . Approximately one-fourth of the blood flow from cardiac output circulates through the kidney, the greatest rate of blood flow for any organ .

The filtration of the blood in the kidneys occurs in the glomerulus, where most solutes are filtered out by glomerular filtration.    

Filtration of the Blood in the Kidneys:

The filtration of the blood in the kidneys primarily occurs in the glomerulus. The glomerulus is a network of capillaries at the beginning of a nephron. When blood flows through the glomerulus, most solutes, except for proteins, are filtered out into the glomerulus by a process called glomerular filtration. The filtrate is then collected in the renal tubules, where it undergoes further processing to form urine.

This process begins with glomerular filtration, continues with tubular reabsorption in the proximal convoluted tubule (PCT), and ends with tubular secretion. Finally, the collecting ducts gather the filtrate, now called urine, which is passed on to the ureters and then eliminated from the body.

Answer:

0.066 mole SO₂

Explanation:

moles = mass in grams / formula weight

= 4.2g/64g/mol = 0.066 mole SO₂

Answer:

The answer to your question is 20 liters

Explanation:

Data

Pressure 1 = P1 = 2 atm

Volume 1 = V1 = 10 l

Pressure 2 = P2 = 1 atm

Volume 2 = V2 = ?

Process

To solve this problem use Boyle's law

              P1V1 = P2V2

-Solve for V2

              V2 = P1V1/P2

-Substitution

              V2 = (2 x 10)/1

-Simplification

              V2 = 20/1

-Result

               V2 = 20 l

Addition of base into the water increase hydronium ion concentration of the solution is a false statement other 4 are correct.

Explanation:

Answer: 1, 2 and 5

Explanation:

did usatestprep

Answer:

The kid on the bike.

Explanation:

He has a physical form, whereas the shadow doesn't.

Answer:

the kid on the bicycle

Explanation:

matter is anything that takes up space and a shadow does not physically take up any space

Answer:

P = 746.2 mmHg or 0.9818 atm

Explanation:

First, we have a sample gas (This can be hydrogen, argon, nitrogen or any other gas) that was collected with a pressure of 778 mmHg. We also know the vapor pressure which is 31.8 mmHg. To get the pressure that the gas is exerting, we can assume that the atmospherical pressure is the total pressure of the whole system. Therefore we can use the following expression:

Pt = Pw + Pg   (1)

Where:

Pt: total pressure

Pw: water pressure

Pg: gas pressure

From (1) we can solve for the gas pressure and have:

Pg = Pt - Pw

Replacing the data we have:

Pg = 778 - 31.8

If you want this value in atm, you should divide it by 760 mmHg (Conversion from mmHg to atm):

Pg = 746.2 / 760

Answer:

chemical reaction... that's because when they combine.. they form a salt and water only

Answer:

THE ANSWER IS (D)

Explanation:

Answer:

it's D

Explanation:

Answer:

A and E

Alpha decay emits the same number of protons and neutrons

Gamma rays are a form of electromagnetic radiation

Explanation:

Just did this one e2020 :)

Answer:

a and e

Explanation:

edge

Answer:

Somatotropin(Growth Hormone)

Explanation:

-Uncontrolled growth in a person is usually caused by the excessive secretion of growth hormone.

-This hormone is also known as Somatotropin.

-This hormone is produced  in the pituitary  gland.

Answer:

[tex]Br_{4}F_{10}[/tex]

The prefix "Tetra" implies 4 Bromine atoms. The prefix "Deca" implies 10 fluorine atoms.